Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Ftrace is one of the last W^X violators (after this only KLP is
left). These patches move it over to the generic text_poke()
interface and thereby get rid of this oddity. This requires a
surprising amount of surgery, by Peter Zijlstra.
- x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to
count certain types of events that have a special, quirky hw ABI
(by Kim Phillips)
- kprobes fixes by Masami Hiramatsu
Lots of tooling updates as well, the following subcommands were
updated: annotate/report/top, c2c, clang, record, report/top TUI,
sched timehist, tests; plus updates were done to the gtk ui, libperf,
headers and the parser"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
perf/x86/amd: Add support for Large Increment per Cycle Events
perf/x86/amd: Constrain Large Increment per Cycle events
perf/x86/intel/rapl: Add Comet Lake support
tracing: Initialize ret in syscall_enter_define_fields()
perf header: Use last modification time for timestamp
perf c2c: Fix return type for histogram sorting comparision functions
perf beauty sockaddr: Fix augmented syscall format warning
perf/ui/gtk: Fix gtk2 build
perf ui gtk: Add missing zalloc object
perf tools: Use %define api.pure full instead of %pure-parser
libperf: Setup initial evlist::all_cpus value
perf report: Fix no libunwind compiled warning break s390 issue
perf tools: Support --prefix/--prefix-strip
perf report: Clarify in help that --children is default
tools build: Fix test-clang.cpp with Clang 8+
perf clang: Fix build with Clang 9
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
tools lib: Fix builds when glibc contains strlcpy()
perf report/top: Make 'e' visible in the help and make it toggle showing callchains
perf report/top: Do not offer annotation for symbols without samples
...
- Time namespace support:
If a container migrates from one host to another then it expects that
clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime these
clocks can differ significantly on two hosts, in the worst case time
goes backwards which is a violation of the POSIX requirements.
The time namespace addresses this problem. It allows to set offsets for
clock MONOTONIC and BOOTTIME once after creation and before tasks are
associated with the namespace. These offsets are taken into account by
timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided by
this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric potential
use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (host time offsets = 0) is
in the noise and great effort was made to ensure that especially in the
VDSO. If time namespace is disabled in the kernel configuration the
code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature
and kept on for more than a year addressing review comments, finding
better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure that
the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code.
-----BEGIN PGP SIGNATURE-----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=x3qT
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix perf to include libbpf header files with the bpf/ prefix, to
be consistent with external users of the library.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560797.1683545.7685921032671386301.stgit@toke.dk
Using .st_ctime clobbers the timestamp information in perf report header
whenever any operation is done with the file. Even tar-ing and untar-ing
the perf.data file (which preserves the file last modification timestamp)
doesn't prevent that:
[Michael@Diego tmp]$ ls -l perf.data
-> -rw-------. 1 Michael Michael 169888 Dec 2 15:23 perf.data
[Michael@Diego tmp]$ perf report --header-only
# ========
-> # captured on : Mon Dec 2 15:23:42 2019
[...]
[Michael@Diego tmp]$ tar c perf.data | xz > perf.data.tar.xz
[Michael@Diego tmp]$ mkdir aaa
[Michael@Diego tmp]$ cd aaa
[Michael@Diego aaa]$ xzcat ../perf.data.tar.xz | tar x
[Michael@Diego aaa]$ ls -l -a
total 172
drwxrwxr-x. 2 Michael Michael 23 Jan 14 11:26 .
drwxrwxr-x. 6 Michael Michael 4096 Jan 14 11:26 ..
-> -rw-------. 1 Michael Michael 169888 Dec 2 15:23 perf.data
[Michael@Diego aaa]$ perf report --header-only
# ========
-> # captured on : Tue Jan 14 11:26:16 2020
[...]
When using .st_mtime instead, correct information is printed:
[Michael@Diego aaa]$ ~/acme/tools/perf/perf report --header-only
# ========
-> # captured on : Mon Dec 2 15:23:42 2019
[...]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200114104236.31555-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sockaddr related examples given in
`tools/perf/examples/bpf/augmented_syscalls.c` almost always use `long`s
to represent most of their fields.
However, `size_t syscall_arg__scnprintf_sockaddr(..)` has a `scnprintf`
call that uses `"%#x"` as format string.
This throws a warning (whenever the syscall argument is `unsigned
long`).
Added `l` identifier to indicate that the `arg->value` is an unsigned
long.
Not sure about the complications of this with x86 though.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113174438.102975-1-cengiz@kernel.wtf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria reported an issue when doing the gtk2 feature detection on
Fedora 31, where some types got deprecated:
/usr/include/gtk-2.0/gtk/gtktypeutils.h:236:1: error: ‘GTypeDebugFlags’ is deprecated [-Werror=deprecated-declarations]
236 | void gtk_type_init (GTypeDebugFlags debug_flags);
Fix this for perf by allowing the compile to pass with deprecated
symbols via the -Wno-deprecated-declarations compiler directive.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we moved zalloc.o to the library we missed gtk library which needs
it compiled in, otherwise the missing __zfree symbol will cause the
library to fail to load.
Adding the zalloc object to the gtk library build.
Fixes: 7f7c536f23 ("tools lib: Adopt zalloc()/zfree() from tools/perf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bison deprecated the "%pure-parser" directive in favor of "%define
api.pure full".
The api.pure got introduced in bison 2.3 (Oct 2007), so it seems safe to
use it without any version check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200112192259.GA35080@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 800d3f5616 ("perf report: Add warning when libunwind not
compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for
call chain unwinding and had no support for libunwind.
So the warning "Please install libunwind development packages during the
perf build." caused the confusion even if the call-graph is displayed
correctly.
This patch adds checking for HAVE_DWARF_SUPPORT, which is set when
libdw-dwarf-unwind is compiled in.
Fixes: 800d3f5616 ("perf report: Add warning when libunwind not compiled in")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The objdump utility has useful --prefix / --prefix-strip options to
allow changing source code file names hardcoded into executables' debug
info. Add options to 'perf report', 'perf top' and 'perf annotate',
which are then passed to objdump.
$ mkdir foo
$ echo 'main() { for (;;); }' > foo/foo.c
$ gcc -g foo/foo.c
foo/foo.c:1:1: warning: return type defaults to ‘int’ [-Wimplicit-int]
1 | main() { for (;;); }
| ^~~~
$ perf record ./a.out
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.230 MB perf.data (5721 samples) ]
$ mv foo bar
$ perf annotate
<does not show source code>
$ perf annotate --prefix=/home/ak/lsrc/git/bar --prefix-strip=5
<does show source code>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20200107210444.214071-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refer to --no-children, which is what most people probably want.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200103183643.149150-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM D59377 (included in Clang 9) refactored Clang VFS construction a
bit, which broke perf clang build. Let's fix it.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Dennis Schridde <devurandom@gmx.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Denis Pronin <dannftk@yandex.ru>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191228171314.946469-2-mail@maciej.szmigiero.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.
There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.
As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com
The 'e' and 'c' hotkeys were present for a long time, but not documented
in the help window, change 'e' to be a toggle so that it gets consistent
with other toggles like '+' and document it in the help window.
Keep 'c' as is for people used to it but don't document, as it is easier
to just use 'e' to show/hide all the callchains for a top level
histogram entry.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pmyi5x34stlqmyu81rci94x9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This can happen in the --children mode, i.e. the default mode when
callchains are present, where one of the main entries may be a callchain
entry with no samples.
So far we were not providing any information about why an annotation
couldn't be provided even offering the Annotation option in the popup
menu.
Work is needed to allow for no-samples "annotation', i.e. to show the
disassembly anyway and allow for navigation, etc.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0hhzj2de15o88cguy7h66zre@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the users presses ENTER in the main 'perf report/top' screen a
popup menu is presented, in it some hotkeys are suggested as
alternatives to using the menu, or for additional features.
At that point the user may try those hotkeys, so allow for that by
recording the key used and exiting, the caller then can check for that
possibility and process the hotkey.
I.e. try pressing ENTER, and then 'k' to exit and zoom into the kernel
map, using ESC then zooms out, etc.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ujfq3fw44kf6qrtfajl5dcsp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this patch if an optional pointer is passed to ui__popup_menu()
then when any key that is not being handled (ENTER, ESC, etc) is typed,
it'll record that key in the pointer and return, allowing for hotkey
processing on the caller.
If NULL is passed, no change in logic, unhandled keys continue to be
ignored.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6ojn19mqzgmrdm8kdoigic0m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we're in an outer code, like the main hists browser popup menu
and the user follows a suggestion about using some hotkey, and that
hotkey is really handled by hists_browser__run(), so allow for calling
it with that hotkey, making it handle it instead of waiting for the user
to press one.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xv2l7i6o4urn37nv1h40ryfs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a convenience, equivalent to pressing Enter in a line with a kernel
symbol and then selecting "Zoom" into the kernel DSO.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-vbnlnrpyfvz9deqoobtc3dz7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to provide a top level hotkey to zoom into the kernel dso
directly.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ae9cjel6v05wjnz9r6z77b6x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Taking into account the current status of the callchain, i.e. if folded,
show "Expand", otherwise "Collapse", also show the name of the entry
that will be affected and mention the hotkeys for expanding/collapsing
all callchains below the main entry, the one that appears with/without
callchains.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-03arm6poo8463k5tfcfp7gkk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since previously pressing ENTER toggled expansion/collapse of callchain
entries and now brings up the same menu used when callchains are not
present, add an entry so that users can quickly figure out the change in
behaviour.
Its worth mentioning that we also always had 'e'/'c' to expand/collapse
all entries in a hist entry and 'E'/'C' for all hist entries.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f9o03jo29fypvd8ly3j49d36@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When callchains are present the ENTER key switches from bringing up the
menu that offers Annotation, Zoom by DSO, etc to expanding/collapsing
one callchain level, causing confusion, fix it by making it consistently
bring up the menu and use '+' to expand/collapse one callchain level.
Next patch will also add an entry to the menu to allow
expanding/collapsing, so that people used to ENTER expanding one
callchain level can quickly find it and use it instead.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-bjz35omktig8cwn6lbj1ifns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set actions->ms.map since 599a2f38a9 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 599a2f38a9 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move libperf from its current location under tools/perf to a separate
directory under tools/lib/.
Also change various paths (mainly includes) to reflect the libperf move
to a separate directory and add a new directory under MANIFEST.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191206210612.8676-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help understand failures.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c951j3gvrgnrsyg7ki7pwkiz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to limit output to one or more CPUs. Really helpful on
systems with a large number of cpus.
Committer testing:
# perf sched record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.765 MB perf.data (1412 samples) ]
[root@quaco ~]# perf sched timehist | head
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
66307.802686 [0000] perf[13086] 0.000 0.000 0.000
66307.802700 [0000] migration/0[12] 0.000 0.001 0.014
66307.802766 [0001] perf[13086] 0.000 0.000 0.000
66307.802774 [0001] migration/1[15] 0.000 0.001 0.007
66307.802841 [0002] perf[13086] 0.000 0.000 0.000
66307.802849 [0002] migration/2[20] 0.000 0.001 0.008
66307.802913 [0003] perf[13086] 0.000 0.000 0.000
#
# perf sched timehist --cpu 2 | head
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
66307.802841 [0002] perf[13086] 0.000 0.000 0.000
66307.802849 [0002] migration/2[20] 0.000 0.001 0.008
66307.964485 [0002] <idle> 0.000 0.000 161.635
66307.964811 [0002] CPU 0/KVM[3589/3561] 0.000 0.056 0.325
66307.965477 [0002] <idle> 0.325 0.000 0.666
66307.965553 [0002] CPU 0/KVM[3589/3561] 0.666 0.024 0.076
66307.966456 [0002] <idle> 0.076 0.000 0.903
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191204173925.66976-1-dsahern@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct mmap_cpu_mask type for the tool's thread and mmap data
buffers to overcome current 1024 CPUs mask size limitation of cpu_set_t
type.
Currently glibc's cpu_set_t type has an internal mask size limit of 1024
CPUs.
Moving to the 'struct mmap_cpu_mask' type allows overcoming that limit.
The tools bitmap API is used to manipulate objects of 'struct mmap_cpu_mask'
type.
Committer notes:
To print the 'nbits' struct member we must use %zd, since it is a
size_t, this fixes the build in some toolchains/arches.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/96d7e2ff-ce8b-c1e0-d52c-aa59ea96f0ea@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Declare a dedicated struct map_cpu_mask type for cpu masks of arbitrary
length.
The mask is available thru bits pointer and the mask length is kept in
nbits field. MMAP_CPU_MASK_BYTES() macro returns mask storage size in
bytes.
The mmap_cpu_mask__scnprintf() function can be used to log text
representation of the mask.
Committer notes:
To print the 'nbits' struct member we must use %zd, since it is a
size_t, this fixes the build in some toolchains/arches.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/0fd2454f-477f-d15a-f4ee-79bcbd2585ff@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Variable names are inconsistent in hists__for_each macro().
Due to this inconsistency, the macro replaces its second argument with
"fmt" regardless of its original name.
So far it works because only "fmt" is passed to the second argument.
However, this behavior is not expected and should be fixed.
Fixes: f0786af536 ("perf hists: Introduce hists__for_each_format macro")
Fixes: aa6f50af82 ("perf hists: Introduce hists__for_each_sort_list macro")
Signed-off-by: Yuya Fujita <fujita.yuya@fujitsu.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a map is create to represent the main kernel area (vmlinux) with
map__new2() we allocate an extra area to store a pointer to the 'struct
maps' for the kernel maps, so that we can access that struct when
loading ELF files or kallsyms, as we will need to split it in multiple
maps, one per kernel module or ELF section (such as ".init.text").
So when map->dso->kernel is non-zero, it is expected that
map__kmap(map)->kmaps to be set to the tree of kernel maps (modules,
chunks of the main kernel, bpf progs put in place via
PERF_RECORD_KSYMBOL, the main kernel).
This was not the case when we were splitting the main kernel into chunks
for its ELF sections, which ended up making 'perf report --children'
processing a perf.data file with callchains to trip on
__map__is_kernel(), when we press ENTER to see the popup menu for main
histogram entries that starts at a symbol in the ".init.text" ELF
section, e.g.:
- 8.83% 0.00% swapper [kernel.vmlinux].init.text [k] start_kernel
start_kernel
cpu_startup_entry
do_idle
cpuidle_enter
cpuidle_enter_state
intel_idle
Fix it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20191218190120.GB13282@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We observed an issue that was some extra columns displayed after switching
perf data file in browser. The steps to reproduce:
1. perf record -a -e cycles,instructions -- sleep 3
2. perf report --group
3. In browser, we use hotkey 's' to switch to another perf.data
4. Now in browser, the extra columns 'Self' and 'Children' are displayed.
The issue is setup_sorting() executed again after repeat path, so dimensions
are added again.
This patch checks the last key returned from __cmd_report(). If it's
K_SWITCH_INPUT_DATA, skips the setup_sorting().
Fixes: ad0de0971b ("perf report: Enable the runtime switching of perf data file")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from
the description for L1D_RO_EXCL_WRITES, but the extra name remained in
the description. Remove it too.
Fixes: 7fcfa9a2d9 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES")
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cf_z13 counter DTLB1_GPAGE_WRITES included a prefix
'Counter:132\tName:'.
This is incorrect; remove the prefix as with 7fcfa9a2d9 for cf_z14.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212143446.88582-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.
However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:
cpu level shared_cpu_list size
0 1 0 32K
0 1 0 64K
0 2 0 512K
0 3 0 8192K
1 1 1 32K
1 1 1 64K
1 2 1 512K
1 3 1 8192K
This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".
v2: Removing unused argument.
v3: Unifying the way we obtain number of cpus.
v4: Removed '& UINT_MAX' construct which is redundant.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
1.000208486
2.000368863
2.001400558
Similarly in skylake platform:
command:./perf stat --metric-only -M Power -I 1000
1.000579994
2.002189493
With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist. Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.
Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.
Example for single metric event in power9 platform:
command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1
1.000094653 0.2
1.001337059 0.0
This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.
With this patch:
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0
2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0
command:# ./perf stat --metric-only -M Power -I 1000
Similarly in skylake platform:
result:#
time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0
2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0
Committer testing:
Before:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time
1.000383223
2.001168182
3.001968545
4.002741200
5.003442022
^C 5.777687244
[root@seventh ~]#
After the patch:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0
2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0
3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0
4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0
5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0
^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0
[root@seventh ~]#
[root@seventh ~]# dmesg | grep -i skylake
[ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[root@seventh ~]#
Fixes: f01642e491 ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel Utilization should divide ref cycles spent in kernel with total
ref cycles.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191204162121.29998-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf top' stopped working on hw architectures that do not provide a
get_cpuid() implementation and thus fallback to the weak get_cpuid()
default function.
This is done because at annotation time we may need it in the arch
specific annotation init routine, but that is only being used by arches
that do provide a get_cpuid() implementation:
$ find tools/ -name "*.[ch]" | xargs grep 'evlist->env'
tools/perf/builtin-top.c: top.evlist->env = &perf_env;
tools/perf/util/evsel.c: return evsel->evlist->env;
tools/perf/util/s390-cpumsf.c: sf->machine_type = s390_cpumsf_get_type(session->evlist->env->cpuid);
tools/perf/util/header.c: session->evlist->env = &header->env;
tools/perf/util/sample-raw.c: const char *arch_pf = perf_env__arch(evlist->env);
$
$ find tools/perf/arch -name "*.[ch]" | xargs grep -w get_cpuid
tools/perf/arch/x86/util/auxtrace.c: ret = get_cpuid(buffer, sizeof(buffer));
tools/perf/arch/x86/util/header.c:get_cpuid(char *buffer, size_t sz)
tools/perf/arch/powerpc/util/header.c:get_cpuid(char *buffer, size_t sz)
tools/perf/arch/s390/util/header.c: * Implementation of get_cpuid().
tools/perf/arch/s390/util/header.c:int get_cpuid(char *buffer, size_t sz)
tools/perf/arch/s390/util/header.c: if (buf && get_cpuid(buf, 128))
$
For 'report' or 'script', i.e. tools working on perf.data files, that is
setup while reading the header, its just top that needs to explicitely
read it at tool start.
Fixes: 608127f737 ("perf top: Initialize perf_env->cpuid, needed by the per arch annotation init routine")
Reported-by: John Garry <john.garry@huawei.com>
Analysed-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # arm64
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the functions calling get_cpuid() propagate back the error it
returns, and all are using errno (positive) values, make the weak
default get_cpuid() function return ENOSYS to be consistent and to allow
checking if this is an arch not providing this function or if a provided
one is having trouble getting the cpuid, to decide if the warning should
be provided to the user or just a debug message should be emitted.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # arm64
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':
7c3977d1e8 libbpf: Fix sym->st_value print on 32-bit arches
1fd450f992 libbpf: Fix up generation of bpf_helper_defs.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ID index event is used when decoding, but can result in the
following error:
$ perf record --aux-sample -e '{intel_pt//,branch-misses}:u' ls
$ perf inject -i perf.data -o perf.data.inj --itrace=be
$ perf script -i perf.data.inj
0x1020 [0x410]: failed to process type: 69 [No such file or directory]
Fix by having 'perf inject' drop the ID index event.
Fixes: c0a6de06c4 ("perf record: Add support for AUX area sampling")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191204120800.8138-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If perf.data is recorded without -d, don't allow user to use --mem-mode
with 'perf report'. symbol_daddr and phys_daddr can be recorded
separately and may be present in the perf.data but at the report time
they are associated with mem-mode fields and thus this restriction
applies to them as well.
Before:
$ perf record ls
$ perf report --mem-mode --stdio
# Overhead Local Weight Memory access Symbol
# ........ ............ ............. .......................
55.56% 0 N/A [k] 0xffffffff81a00ae7
After:
$ perf report --mem-mode --stdio
Error:
Selected --mem-mode but no mem data. Did you call perf record without -d?
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191114132213.5419-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently -F allows branch-mode / mem-mode fields with -F even
when perf report is not running in that mode. Don't allow that.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191114132213.5419-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pr_err() in TUI mode does not print anyting on the screen and just
quits.
Replace such pr_err() with ui__error().
Before:
$ perf report -s +
$
After:
$ perf report -s +
┌─Error:────────────────┐
│Invalid --sort key: `+'│
│ │
│Press any key... │
└───────────────────────┘
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191114132213.5419-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-02
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 6 day(s) which contain
a total of 10 files changed, 60 insertions(+), 51 deletions(-).
The main changes are:
1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev.
2) Fix libbpf global variable relocation to take symbol's st_value offset
into account, from Andrii Nakryiko.
3) Fix libbpf build on powerpc where check_abi target fails due to different
readelf output format, from Aurelien Jarno.
4) Don't set BPF insns RO for the case when they are JITed in order to avoid
fragmenting the direct map, from Daniel Borkmann.
5) Fix static checker warning in btf_distill_func_proto() as well as a build
error due to empty enum when BPF is compiled out, from Alexei Starovoitov.
6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'perf kvm' subcommand has options that it in turn passes to other
perf subcommands such as 'report' and 'record', particularly -i and -o
end up setting the same variable that will then be used for 'record's -o
and report '-i', which ends up being confusing, leading some to think
that both -i and -o can be used with 'report'.
Improve the man page to state that -i is used with the post-processing
subcommands while -o is used just with 'record' and that to save the
output of 'report' one should simply redirect its output to a file.
Noticed while reading the https://www.linux-kvm.org/page/Perf_events
page.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steve Dickson <steved@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-tclbttvmgtm525fvmh85f7d9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the recently added CLONE_CLEAR_SIGHAND flag.
This takes advantage of the copy of the uapi/linux/sched.h we have in
tools/include, which allows us to build tools/perf in older systems and
have the binary support printing that flag whenever that system gets its
kernel updated to one where this feature is present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org
Link: https://lkml.kernel.org/n/tip-1vnz497ubtu5oz16ygdcul0e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
