Calling v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode) when
the stream is already active (through another /dev/video# node) causes
the stream to stop.
Move the call to set the default run-mode so that it is only done
on the first open of one of the 4 /dev/video# nodes of one of
the 2 streams (atomisp-sub-devices / asd-s).
Fixes: 2c45e343c5 ("media: atomisp: set per-device's default mode")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't touch q->start_streaming_called directly, use the
vb2_start_streaming_called() function instead.
Link: https://lore.kernel.org/r/bc6c24ec-72ea-64a1-9061-311cc7339827@xs4all.nl
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The recent conversion missed the Kconfig bit, so it can now
end up in a link error on randconfig builds:
ld.lld: error: undefined symbol: vb2_vmalloc_memops
>>> referenced by atomisp_fops.c
>>> drivers/staging/media/atomisp/pci/atomisp_fops.o:(atomisp_open) in archive vmlinux.a
Link: https://lore.kernel.org/r/20230104082212.3770415-1-arnd@kernel.org
Fixes: cb48ae89be ("media: atomisp: Convert to videobuf2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the ene device is detaching, function ene_remove() will
be called. But there is no function to cancel tx_sim_timer
in ene_remove(), the timer handler ene_tx_irqsim() could race
with ene_remove(). As a result, the UAF bugs could happen,
the process is shown below.
(cleanup routine) | (timer routine)
| mod_timer(&dev->tx_sim_timer, ..)
ene_remove() | (wait a time)
| ene_tx_irqsim()
| dev->hw_lock //USE
| ene_tx_sample(dev) //USE
Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(),
The tx_sim_timer could stop before ene device is deallocated.
What's more, The rc_unregister_device() and del_timer_sync()
should be called first in ene_remove() and the deallocated
functions such as free_irq(), release_region() and so on
should be called behind them. Because the rc_unregister_device()
is well synchronized. Otherwise, race conditions may happen. The
situations that may lead to race conditions are shown below.
Firstly, the rx receiver is disabled with ene_rx_disable()
before rc_unregister_device() in ene_remove(), which means it
can be enabled again if a process opens /dev/lirc0 between
ene_rx_disable() and rc_unregister_device().
Secondly, the irqaction descriptor is freed by free_irq()
before the rc device is unregistered, which means irqaction
descriptor may be accessed again after it is deallocated.
Thirdly, the timer can call ene_tx_sample() that can write
to the io ports, which means the io ports could be accessed
again after they are deallocated by release_region().
Therefore, the rc_unregister_device() and del_timer_sync()
should be called first in ene_remove().
Suggested by: Sean Young <sean@mess.org>
Fixes: 9ea53b74df ("V4L/DVB: STAGING: remove lirc_ene0100 driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties. The common CEC
binding expects also node name to be 'cec'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded
"bindings" in the title.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
unneeded quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the pointer variable is judged to be null, null is returned
directly.
[hverkuil: fix two checkpatch warnings]
Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: d3f756ad62 ("media: v4l2: Trace calculated p/b0/b1 initial reflist")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Hantro driver uses a hardcoded value for the bus_info field in the
media device and |struct v4l2_capability|. This worked well when there
was just one device. However with the iMX.8 series we are now seeing
two Hantro blocks on the same chip. The static bus_info is no longer
sufficient for differentiating devices.
Since commit f2d8b6917f ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.
Drop the static bus_info values from the hantro driver and use the
defaults.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
pm_runtime_put will set RPM_ASYNC flag then queue an idle-notification
request again, won't return error immediately until current request is
scheduled.
But pm_runtime_put_sync run the ->runtime_idle() callback directly, return
error immediately no matter whether current request is scheduled.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
in the E.2.1 of Rec. ITU-T H.264 (06/2019),
0 of colour primaries is reserved, and 2 is unspecified.
driver can map V4L2_COLORSPACE_LAST to 0,
and map V4L2_COLORSPACE_DEFAULT to 2.
v4l2_xfer_func and v4l2_ycbcr_encoding are similar case.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
using the api of clk_bulk can simplify the code.
and the clock of the jpeg codec may be changed,
the clk_bulk api can be compatible with the future change.
Fixes: 4c2e5156d9 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't populate the const arrays on the stack, instead make them
static. Also makes the object code smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't populate the read-only const array DURATION on the stack but
instead make it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
At present, the function imx_media_fim_set_stream() always returns 0.
So, convert it to be a function returning void instead. Issue identified
using the returnvar.cocci Coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since 79c987de8b, enumerating framesize on format set with "MODE_NONE"
(any raw formats) is reporting an invalid frmsize.
Size: Stepwise 0x0 - 0x0 with step 0/0
Before this change, the driver would return EINVAL, which is also invalid
but worked in GStreamer. The original intent was not to implement it, hence
the -ENOTTY return in this change. While drivers should implement
ENUM_FRMSIZE for all formats and queues, this change is limited in scope to
fix the regression.
This fixes taking picture in Gnome Cheese software, or any software using
GSteamer to encode JPEG with hardware acceleration.
Fixes: 79c987de8b ("media: hantro: Use post processor scaling capacities")
Reported-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The void * type pointer does not need to be cast.
Signed-off-by: Zhou jie <zhoujie@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The legal identifier of APP14 is "Adobe\0",
but sometimes it may be
"This is an unknown APP marker . Compliant decoders must ignore it."
In this case, just ignore it.
It won't affect the decode result.
Fixes: b8035f7988 ("media: Add parsing for APP14 data segment in jpeg helpers")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The curr pointer has advanced 14 bytes in jpeg_parse_app14_data.
1. jpeg_get_word_be(stream), it goes forward 2 bytes.
2. jpeg_skip(stream, 11), it goes forward 11 bytes.
3. jpeg_get_byte(stream), it goes forward 1 bytes.
so the remain bytes of this segment should be (lp - 2 - 11 - 1),
but not (lp - 2 - 11).
if driver skip 1 extra bytes, the following parsing may go wrong.
Fixes: b8035f7988 ("media: Add parsing for APP14 data segment in jpeg helpers")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The new mdp3 driver uses 'select' to force-enable a couple of drivers
it depends on. This is error-prone and likely to cause dependency
loops as well as warnings like:
WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU
Depends on [n]: MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y])
Selected by [m]:
- VIDEO_MEDIATEK_MDP3 [=m] && MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=m] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y]
This specific warning was already addressed in a previous patch,
but there are similar unnecessary 'select' statements, so turn those
into 'depends on'. This also means the dependency on ARCH_MEDIATEK
is redundant and can be dropped.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Fixes: 9195a860ef ("media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Marking a case of the switch statement as unreachable means the
compiler treats it as undefined behavior, which is then caught by
an objtool warning:
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable()
Instead of simply continuing execution at a random place of the
driver, print a warning and return from to the caller, which
makes it possible to understand what happens and avoids the
warning.
Fixes: 53655d2a0f ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The streaming state is maintained by the vb2 core, so drivers
must never change it themselves.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't touch q->streaming directly, use the vb2_is_streaming()
function instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't touch q->streaming directly, use the vb2_is_streaming()
function instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use URL rather than plain text.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use URL rather than plain text.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The field 'pctrl' in 'struct fimc_is' is not used, just like
linux/pinctrl/consumer.h headers in the headers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In case of error, the function mtk_mutex_get()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
And also fix the err_free_mutex case.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sanity check in __vb2_queue_free() is obsolete ever since commit
f035eb4e97 ("[media] videobuf2: fix lockdep warning"). Remove it and
let __vb2_queue_free() return void.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
record the colorspace set by user.
if it's not supported by h264 vui, then zero will be written to vui,
but don't modify the user setting.
Fixes: 0401e659c1 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are no existing users of s5c73m3_platform_data in the tree, and
new users should either be using device tree, ACPI, or static device
properties, so let's remove it from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
v4l2_dbg and friends are legacy and should be removed.
Replaced all the calls with dev_dbg equivalent.
This also removes the 'debug' module parameter which has become obsolete.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for the Sony IMX415 CMOS image sensor.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add devicetree binding for the Sony IMX415 CMOS image sensor.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.
Fixes: commit c2a6a07afe ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ov5670 driver registers three controls as read-only:
- V4L2_CID_PIXEL_RATE
- V4L2_CID_LINK_FREQ
- V4L2_CID_HBLANK
The driver updates the range of HBLANK with __v4l2_ctrl_modify_range()
and updates the values of PIXEL_RATE and LINK_FREQ with an
explicit call to __v4l2_ctrl_s_ctrl() in ov5670_set_pad_format() time.
This causes the .set_ctrl handler to be called on these controls
causing a non-fatal warning to be emitted:
ov5670_set_ctrl Unhandled id:0x9e0902, val:0x824
This is currently only critical for HBLANK, as LINK_FREQ and PIXEL_RATE
currently only support a single value, and the v4l2-ctrl framework skips
calling .set_ctrl() if the current control value is not changed.
Expand the ov5670_set_ctrl() callback to handle the above controls
to remove the above warning and defend against future expansions
of the supported pixel rates and link frequencies.
Also be stricter and return an error value if a control is actually not
handled.
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
