In svc_rdma_accept(), if rdma_create_qp() fails, there is useless
logic to try and call rdma_create_qp() again with reduced sge depths.
The assumption, I guess, was that perhaps the initial sge depths
chosen were too big. However they initial depths are selected based
on the rdma device attribute max_sge returned from ib_query_device().
If rdma_create_qp() fails, it would not be because the max_send_sge and
max_recv_sge values passed in exceed the device's max. So just remove
this code.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The default hop penalty is currently set to 15, which is applied like
that for multi interface devices (e.g. dual band APs). Single band
devices will still use an effective penalty of 30 (hop penalty + wifi
penalty).
After receiving reports of too long paths in mesh networks with dual
band APs which were fixed by increasing the hop penalty, we'd like to
suggest to increase that default value in the default setting as well.
We've evaluated that increase in a handful of medium sized mesh
networks (5-20 nodes) with single and dual band devices, with changes
for the better (shorter routes, higher throughput) or no change at all.
This patch changes the hop penalty to 30, which will give an effective
penalty of 60 on single band devices (hop penalty + wifi penalty).
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
This patch removes unnecessary logspam which resulted from superfluous
calls to net_ratelimit(). With the supplied patch, net_ratelimit() is
called after the loglevel has been checked.
Signed-off-by: André Gaul <gaul@web-yard.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
batadv_frag_insert_packet was unable to handle out-of-order packets because it
dropped them directly. This is caused by the way the fragmentation lists is
checked for the correct place to insert a fragmentation entry.
The fragmentation code keeps the fragments in lists. The fragmentation entries
are kept in descending order of sequence number. The list is traversed and each
entry is compared with the new fragment. If the current entry has a smaller
sequence number than the new fragment then the new one has to be inserted
before the current entry. This ensures that the list is still in descending
order.
An out-of-order packet with a smaller sequence number than all entries in the
list still has to be added to the end of the list. The used hlist has no
information about the last entry in the list inside hlist_head and thus the
last entry has to be calculated differently. Currently the code assumes that
the iterator variable of hlist_for_each_entry can be used for this purpose
after the hlist_for_each_entry finished. This is obviously wrong because the
iterator variable is always NULL when the list was completely traversed.
Instead the information about the last entry has to be stored in a different
variable.
This problem was introduced in 610bfc6bc9
("batman-adv: Receive fragmented packets and merge").
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
With netlink_lookup() conversion to RCU, we need to use appropriate
rcu dereference in netlink_seq_socket_idx() & netlink_seq_next()
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the big tty / serial driver update for 3.17-rc1.
Nothing major, just a number of fixes and new features for different
serial drivers, and some more tty core fixes and documentation of the
tty locks.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf2C4ACgkQMUfUDdst+yllVgCgtZl/Mcr/LlxPgjsg2C1AE7nX
YJ4An3o4N112bkdGqhZ7RjAE6K/8YILx
=rPhE
-----END PGP SIGNATURE-----
Merge tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver update from Greg KH:
"Here's the big tty / serial driver update for 3.17-rc1.
Nothing major, just a number of fixes and new features for different
serial drivers, and some more tty core fixes and documentation of the
tty locks.
All of these have been in linux-next for a while"
* tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (82 commits)
tty/n_gsm.c: fix a memory leak in gsmld_open
pch_uart: don't hardcode PCI slot to get DMA device
tty: n_gsm, use setup_timer
Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console"
serial: sc16is7xx: Correct initialization of s->clk
serial: 8250_dw: Add support for deferred probing
serial: 8250_dw: Add optional reset control support
serial: st-asc: Fix overflow in baudrate calculation
serial: st-asc: Don't call BUG in asc_console_setup()
tty: serial: msm: Make of_device_id array const
tty/n_gsm.c: get gsm->num after gsm_activate_mux
serial/core: Fix too big allocation for attribute member
drivers/tty/serial: use correct type for dma_map/unmap
serial: altera_jtaguart: Fix putchar function passed to uart_console_write()
serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
Serial: allow port drivers to have a default attribute group
tty: kgdb_nmi: Automatically manage tty enable
serial: altera_jtaguart: Adpot uart_console_write()
serial: samsung: improve code clarity by defining a variable
serial: samsung: correct the case and default order in switch
...
Pull scheduler updates from Ingo Molnar:
- Move the nohz kick code out of the scheduler tick to a dedicated IPI,
from Frederic Weisbecker.
This necessiated quite some background infrastructure rework,
including:
* Clean up some irq-work internals
* Implement remote irq-work
* Implement nohz kick on top of remote irq-work
* Move full dynticks timer enqueue notification to new kick
* Move multi-task notification to new kick
* Remove unecessary barriers on multi-task notification
- Remove proliferation of wait_on_bit() action functions and allow
wait_on_bit_action() functions to support a timeout. (Neil Brown)
- Another round of sched/numa improvements, cleanups and fixes. (Rik
van Riel)
- Implement fast idling of CPUs when the system is partially loaded,
for better scalability. (Tim Chen)
- Restructure and fix the CPU hotplug handling code that may leave
cfs_rq and rt_rq's throttled when tasks are migrated away from a dead
cpu. (Kirill Tkhai)
- Robustify the sched topology setup code. (Peterz Zijlstra)
- Improve sched_feat() handling wrt. static_keys (Jason Baron)
- Misc fixes.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
sched/fair: Fix 'make xmldocs' warning caused by missing description
sched: Use macro for magic number of -1 for setparam
sched: Robustify topology setup
sched: Fix sched_setparam() policy == -1 logic
sched: Allow wait_on_bit_action() functions to support a timeout
sched: Remove proliferation of wait_on_bit() action functions
sched/numa: Revert "Use effective_load() to balance NUMA loads"
sched: Fix static_key race with sched_feat()
sched: Remove extra static_key*() function indirection
sched/rt: Fix replenish_dl_entity() comments to match the current upstream code
sched: Transform resched_task() into resched_curr()
sched/deadline: Kill task_struct->pi_top_task
sched: Rework check_for_tasks()
sched/rt: Enqueue just unthrottled rt_rq back on the stack in __disable_runtime()
sched/fair: Disable runtime_enabled on dying rq
sched/numa: Change scan period code to match intent
sched/numa: Rework best node setting in task_numa_migrate()
sched/numa: Examine a task move when examining a task swap
sched/numa: Simplify task_numa_compare()
sched/numa: Use effective_load() to balance NUMA loads
...
tcpm_key is an array inside struct tcp_md5sig, there is no need to check it
against NULL.
Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 6cbdceeb1c
bridge: Dump vlan information from a bridge port
introduced a comment in an attempt to explain the
code logic. The comment is unfinished so it confuses more
than it explains, remove it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cgroup changes from Tejun Heo:
"Mostly changes to get the v2 interface ready. The core features are
mostly ready now and I think it's reasonable to expect to drop the
devel mask in one or two devel cycles at least for a subset of
controllers.
- cgroup added a controller dependency mechanism so that block cgroup
can depend on memory cgroup. This will be used to finally support
IO provisioning on the writeback traffic, which is currently being
implemented.
- The v2 interface now uses a separate table so that the interface
files for the new interface are explicitly declared in one place.
Each controller will explicitly review and add the files for the
new interface.
- cpuset is getting ready for the hierarchical behavior which is in
the similar style with other controllers so that an ancestor's
configuration change doesn't change the descendants' configurations
irreversibly and processes aren't silently migrated when a CPU or
node goes down.
All the changes are to the new interface and no behavior changed for
the multiple hierarchies"
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (29 commits)
cpuset: fix the WARN_ON() in update_nodemasks_hier()
cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
cgroup: distinguish the default and legacy hierarchies when handling cftypes
cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
cpuset: export effective masks to userspace
cpuset: allow writing offlined masks to cpuset.cpus/mems
cpuset: enable onlined cpu/node in effective masks
cpuset: refactor cpuset_hotplug_update_tasks()
cpuset: make cs->{cpus, mems}_allowed as user-configured masks
cpuset: apply cs->effective_{cpus,mems}
cpuset: initialize top_cpuset's configured masks at mount
cpuset: use effective cpumask to build sched domains
cpuset: inherit ancestor's masks if effective_{cpus, mems} becomes empty
cpuset: update cs->effective_{cpus, mems} when config changes
cpuset: update cpuset->effective_{cpus,mems} at hotplug
cpuset: add cs->effective_cpus and cs->effective_mems
cgroup: clean up sane_behavior handling
...
Reported by checkpatch with the following warning:
WARNING: Prefer kmalloc_array over kmalloc with multiply
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
current_cred() can only be changed by 'current', and
cred->group_info is never changed. If a new group_info is
needed, a new 'cred' is created.
Consequently it is always safe to access
current_cred()->group_info
without taking any further references.
So drop the refcounting and the incorrect rcu_dereference().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking,
does not take a reference on the returned credential, and returns
-ECHILD if a simple lookup was not possible.
The returned value can only be used within an rcu_read_lock protected
region.
The main user of this is the new rpc_lookup_cred_nonblock() which
returns a pointer to the current credential which is only rcu-safe (no
ref-count held), and might return -ECHILD if allocation was required.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix the endianness handling in gss_wrap_kerberos_v1 and drop the memset
call there in favor of setting the filler bytes directly.
In gss_wrap_kerberos_v2, get rid of the "ec" variable which is always
zero, and drop the endianness conversion of 0. Sparse handles 0 as a
special case, so it's not necessary.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use u16 pointer in setup_token and setup_token_v2. None of the fields
are actually handled as __be16, so this simplifies the code a bit. Also
get rid of some unneeded pointer increments.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The handling of the gc_ctx pointer only seems to be partially RCU-safe.
The assignment and freeing are done using RCU, but many places in the
code seem to dereference that pointer without proper RCU safeguards.
Fix them to use rcu_dereference and to rcu_read_lock/unlock, and to
properly handle the case where the pointer is NULL.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (916 commits)
xprtrdma: Handle additional connection events
xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
xprtrdma: Make rpcrdma_ep_disconnect() return void
xprtrdma: Schedule reply tasklet once per upcall
xprtrdma: Allocate each struct rpcrdma_mw separately
xprtrdma: Rename frmr_wr
xprtrdma: Disable completions for LOCAL_INV Work Requests
xprtrdma: Disable completions for FAST_REG_MR Work Requests
xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external()
xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request
xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect
xprtrdma: Properly handle exhaustion of the rb_mws list
xprtrdma: Chain together all MWs in same buffer pool
xprtrdma: Back off rkey when FAST_REG_MR fails
xprtrdma: Unclutter struct rpcrdma_mr_seg
xprtrdma: Don't invalidate FRMRs if registration fails
xprtrdma: On disconnect, don't ignore pending CQEs
xprtrdma: Update rkeys after transport reconnect
xprtrdma: Limit data payload size for ALLPHYSICAL
xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs
...
In some cases where the credentials are not often reused, we may want
to limit their total number just in order to make the negative lookups
in the hash table more manageable.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The sizing of the hash table and the practice of requiring a lookup
to retrieve the pprev to be stored in the element cookie before the
deletion of an entry is left intact.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Patrick McHardy <kaber@trash.net>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heavy Netlink users such as Open vSwitch spend a considerable amount of
time in netlink_lookup() due to the read-lock on nl_table_lock. Use of
RCU relieves the lock contention.
Makes use of the new resizable hash table to avoid locking on the
lookup.
The hash table will grow if entries exceeds 75% of table size up to a
total table size of 64K. It will automatically shrink if usage falls
below 30%.
Also splits nl_table_lock into a separate mutex to protect hash table
mutations and allow synchronize_rcu() to sleep while waiting for readers
during expansion and shrinking.
Before:
9.16% kpktgend_0 [openvswitch] [k] masked_flow_lookup
6.42% kpktgend_0 [pktgen] [k] mod_cur_headers
6.26% kpktgend_0 [pktgen] [k] pktgen_thread_worker
6.23% kpktgend_0 [kernel.kallsyms] [k] memset
4.79% kpktgend_0 [kernel.kallsyms] [k] netlink_lookup
4.37% kpktgend_0 [kernel.kallsyms] [k] memcpy
3.60% kpktgend_0 [openvswitch] [k] ovs_flow_extract
2.69% kpktgend_0 [kernel.kallsyms] [k] jhash2
After:
15.26% kpktgend_0 [openvswitch] [k] masked_flow_lookup
8.12% kpktgend_0 [pktgen] [k] pktgen_thread_worker
7.92% kpktgend_0 [pktgen] [k] mod_cur_headers
5.11% kpktgend_0 [kernel.kallsyms] [k] memset
4.11% kpktgend_0 [openvswitch] [k] ovs_flow_extract
4.06% kpktgend_0 [kernel.kallsyms] [k] _raw_spin_lock
3.90% kpktgend_0 [kernel.kallsyms] [k] jhash2
[...]
0.67% kpktgend_0 [kernel.kallsyms] [k] netlink_lookup
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) Maintain all DSCP and ECN bits for IPv6 tun forwarding. This
resolves an inconsistency between IPv4 and IPv6 behaviour.
Patch from Alex Gartrell via Simon Horman.
2) Fix unnoticeable blink in xt_LED when the led-always-blink option is
used, from Jiri Prchal.
3) Add missing return in nft_del_setelem(), otherwise this results in a
double call of nft_data_uninit() in the nf_tables code, from Thomas Graf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: e110861f86 ("net: add a sysctl to reflect the fwmark on replies")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kmem_cache to allocate/free inet_frag_queue objects since they're
all the same size per inet_frags user and are alloced/freed in high volumes
thus making it a perfect case for kmem_cache.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have INET_FRAG_EVICTED we might as well use it to stop
sending icmp messages in the "frag_expire" functions instead of
stripping INET_FRAG_FIRST_IN from their flags when evicting.
Also fix the comment style in ip6_expire_frag_queue().
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a couple of functions' declaration alignments.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last_in field has been used to store various flags different from
first/last frag in so give it a more descriptive name: flags.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Softirqs are already disabled so no need to do it again, thus let's be
consistent and use the IP6_INC_STATS_BH variant.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_local_deliver_finish() already have a rcu_read_lock/unlock, so
the rcu_read_lock/unlock is unnecessary.
See the stack below:
ip_local_deliver_finish
|
|
->icmp_rcv
|
|
->icmp_socket_deliver
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
clean up names related to socket filtering and bpf in the following way:
- everything that deals with sockets keeps 'sk_*' prefix
- everything that is pure BPF is changed to 'bpf_*' prefix
split 'struct sk_filter' into
struct sk_filter {
atomic_t refcnt;
struct rcu_head rcu;
struct bpf_prog *prog;
};
and
struct bpf_prog {
u32 jited:1,
len:31;
struct sock_fprog_kern *orig_prog;
unsigned int (*bpf_func)(const struct sk_buff *skb,
const struct bpf_insn *filter);
union {
struct sock_filter insns[0];
struct bpf_insn insnsi[0];
struct work_struct work;
};
};
so that 'struct bpf_prog' can be used independent of sockets and cleans up
'unattached' bpf use cases
split SK_RUN_FILTER macro into:
SK_RUN_FILTER to be used with 'struct sk_filter *' and
BPF_PROG_RUN to be used with 'struct bpf_prog *'
__sk_filter_release(struct sk_filter *) gains
__bpf_prog_release(struct bpf_prog *) helper function
also perform related renames for the functions that work
with 'struct bpf_prog *', since they're on the same lines:
sk_filter_size -> bpf_prog_size
sk_filter_select_runtime -> bpf_prog_select_runtime
sk_filter_free -> bpf_prog_free
sk_unattached_filter_create -> bpf_prog_create
sk_unattached_filter_destroy -> bpf_prog_destroy
sk_store_orig_filter -> bpf_prog_store_orig_filter
sk_release_orig_filter -> bpf_release_orig_filter
__sk_migrate_filter -> bpf_migrate_filter
__sk_prepare_filter -> bpf_prepare_filter
API for attaching classic BPF to a socket stays the same:
sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *)
and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program
which is used by sockets, tun, af_packet
API for 'unattached' BPF programs becomes:
bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *)
and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program
which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
to indicate that this function is converting classic BPF into eBPF
and not related to sockets
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
trivial rename to indicate that this functions performs classic BPF checking
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
trivial rename to better match semantics of macro
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
attaching bpf program to a socket involves multiple socket memory arithmetic,
since size of 'sk_filter' is changing when classic BPF is converted to eBPF.
Also common path of program creation has to deal with two ways of freeing
the memory.
Simplify the code by delaying socket charging until program is ready and
its size is known
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nft_del_setelem() currently calls nft_data_uninit() twice on the same
key. Once to release the key which is guaranteed to be NFT_DATA_VALUE
and a second time in the error path to which it falls through.
The second call has been harmless so far though because the type
passed is always NFT_DATA_VALUE which is currently a no-op.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Historically the NetLabel LSM secattr catmap functions and data
structures have had very long names which makes a mess of the NetLabel
code and anyone who uses NetLabel. This patch renames the catmap
functions and structures from "*_secattr_catmap_*" to just "*_catmap_*"
which improves things greatly.
There are no substantial code or logic changes in this patch.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
The two NetLabel LSM secattr catmap walk functions didn't handle
certain edge conditions correctly, causing incorrect security labels
to be generated in some cases. This patch corrects these problems and
converts the functions to use the new _netlbl_secattr_catmap_getnode()
function in order to reduce the amount of repeated code.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
The NetLabel secattr catmap functions, and the SELinux import/export
glue routines, were broken in many horrible ways and the SELinux glue
code fiddled with the NetLabel catmap structures in ways that we
probably shouldn't allow. At some point this "worked", but that was
likely due to a bit of dumb luck and sub-par testing (both inflicted
by yours truly). This patch corrects these problems by basically
gutting the code in favor of something less obtuse and restoring the
NetLabel abstractions in the SELinux catmap glue code.
Everything is working now, and if it decides to break itself in the
future this code will be much easier to debug than the code it
replaces.
One noteworthy side effect of the changes is that it is no longer
necessary to allocate a NetLabel catmap before calling one of the
NetLabel APIs to set a bit in the catmap. NetLabel will automatically
allocate the catmap nodes when needed, resulting in less allocations
when the lowest bit is greater than 255 and less code in the LSMs.
Cc: stable@vger.kernel.org
Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
The NetLabel category (catmap) functions have a problem in that they
assume categories will be set in an increasing manner, e.g. the next
category set will always be larger than the last. Unfortunately, this
is not a valid assumption and could result in problems when attempting
to set categories less than the startbit in the lowest catmap node.
In some cases kernel panics and other nasties can result.
This patch corrects the problem by checking for this and allocating a
new catmap node instance and placing it at the front of the list.
Cc: stable@vger.kernel.org
Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
When performing segmentation, the mac_len value is copied right
out of the original skb. However, this value is not always set correctly
(like when the packet is VLAN-tagged) and we'll end up copying a bad
value.
One way to demonstrate this is to configure a VM which tags
packets internally and turn off VLAN acceleration on the forwarding
bridge port. The packets show up corrupt like this:
16:18:24.985548 52:54:00🆎be:25 > 52:54:00:26:ce:a3, ethertype 802.1Q
(0x8100), length 1518: vlan 100, p 0, ethertype 0x05e0,
0x0000: 8cdb 1c7c 8cdb 0064 4006 b59d 0a00 6402 ...|...d@.....d.
0x0010: 0a00 6401 9e0d b441 0a5e 64ec 0330 14fa ..d....A.^d..0..
0x0020: 29e3 01c9 f871 0000 0101 080a 000a e833)....q.........3
0x0030: 000f 8c75 6e65 7470 6572 6600 6e65 7470 ...unetperf.netp
0x0040: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp
0x0050: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp
0x0060: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp
...
This also leads to awful throughput as GSO packets are dropped and
cause retransmissions.
The solution is to set the mac_len using the values already available
in then new skb. We've already adjusted all of the header offset, so we
might as well correctly figure out the mac_len using skb_reset_mac_len().
After this change, packets are segmented correctly and performance
is restored.
CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use PAGE_ALIGNED(...) instead of IS_ALIGNED(..., PAGE_SIZE).
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dealing with ICMPv[46] Error Message, function icmp_socket_deliver()
and icmpv6_notify() do some valid checks on packet's length, but then some
protocols check packet's length redaudantly. So remove those duplicated
statements, and increase counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORS in
function icmp_socket_deliver() and icmpv6_notify() respectively.
In addition, add missed counter in udp6/udplite6 when socket is NULL.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SCTP socket extensions API document describes the v4mapping option as
follows:
8.1.15. Set/Clear IPv4 Mapped Addresses (SCTP_I_WANT_MAPPED_V4_ADDR)
This socket option is a Boolean flag which turns on or off the
mapping of IPv4 addresses. If this option is turned on, then IPv4
addresses will be mapped to V6 representation. If this option is
turned off, then no mapping will be done of V4 addresses and a user
will receive both PF_INET6 and PF_INET type addresses on the socket.
See [RFC3542] for more details on mapped V6 addresses.
This description isn't really in line with what the code does though.
Introduce addr_to_user (renamed addr_v4map), which should be called
before any sockaddr is passed back to user space. The new function
places the sockaddr into the correct format depending on the
SCTP_I_WANT_MAPPED_V4_ADDR option.
Audit all places that touched v4mapped and either sanely construct
a v4 or v6 address then call addr_to_user, or drop the
unnecessary v4mapped check entirely.
Audit all places that call addr_to_user and verify they are on a sycall
return path.
Add a custom getname that formats the address properly.
Several bugs are addressed:
- SCTP_I_WANT_MAPPED_V4_ADDR=0 often returned garbage for
addresses to user space
- The addr_len returned from recvmsg was not correct when
returning AF_INET on a v6 socket
- flowlabel and scope_id were not zerod when promoting
a v4 to v6
- Some syscalls like bind and connect behaved differently
depending on v4mapped
Tested bind, getpeername, getsockname, connect, and recvmsg for proper
behaviour in v4mapped = 1 and 0 cases.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains netfilter updates for net-next, they are:
1) Add the reject expression for the nf_tables bridge family, this
allows us to send explicit reject (TCP RST / ICMP dest unrech) to
the packets matching a rule.
2) Simplify and consolidate the nf_tables set dumping logic. This uses
netlink control->data to filter out depending on the request.
3) Perform garbage collection in xt_hashlimit using a workqueue instead
of a timer, which is problematic when many entries are in place in
the tables, from Eric Dumazet.
4) Remove leftover code from the removed ulog target support, from
Paul Bolle.
5) Dump unmodified flags in the netfilter packet accounting when resetting
counters, so userspace knows that a counter was in overquota situation,
from Alexey Perevalov.
6) Fix wrong usage of the bitwise functions in nfnetlink_acct, also from
Alexey.
7) Fix a crash when adding new set element with an empty NFTA_SET_ELEM_LIST
attribute.
This patchset also includes a couple of cleanups for xt_LED from
Duan Jiong and for nf_conntrack_ipv4 (using coccinelle) from
Himangi Saraogi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
commit d23ff7016 (tcp: add generic netlink support for tcp_metrics) introduced
netlink support for the new tcp_metrics, however it restricted getting of
tcp_metrics to root user only. This is a change from how these values could
have been fetched when in the old route cache. Unless there's a legitimate
reason to restrict the reading of these values it would be better if normal
users could fetch them.
Cc: Julian Anastasov <ja@ssi.bg>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 38ca83a5 added RDMA_CM_EVENT_TIMEWAIT_EXIT. But that status
is relevant only for consumers that re-use their QPs on new
connections. xprtrdma creates a fresh QP on reconnection, so that
event should be explicitly ignored.
Squelch the alarming "unexpected CM event" message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
RPCRDMA_PERSISTENT_REGISTRATION was a compile-time switch between
RPCRDMA_REGISTER mode and RPCRDMA_ALLPHYSICAL mode. Since
RPCRDMA_REGISTER has been removed, there's no need for the extra
conditional compilation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The return code is used only for dprintk's that are
already redundant.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Minor optimization: grab rpcrdma_tk_lock_g and disable hard IRQs
just once after clearing the receive completion queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently rpcrdma_buffer_create() allocates struct rpcrdma_mw's as
a single contiguous area of memory. It amounts to quite a bit of
memory, and there's no requirement for these to be carved from a
single piece of contiguous memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Name frmr_wr after the opcode of the Work Request,
consistent with the send and local invalidation paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of relying on a completion to change the state of an FRMR
to FRMR_IS_INVALID, set it in advance. If an error occurs, a completion
will fire anyway and mark the FRMR FRMR_IS_STALE.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of relying on a completion to change the state of an FRMR
to FRMR_IS_VALID, set it in advance. If an error occurs, a completion
will fire anyway and mark the FRMR FRMR_IS_STALE.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Any FRMR arriving in rpcrdma_register_frmr_external() is now
guaranteed to be either invalid, or to be targeted by a queued
LOCAL_INV that will invalidate it before the adapter processes
the FAST_REG_MR being built here.
The problem with current arrangement of chaining a LOCAL_INV to the
FAST_REG_MR is that if the transport is not connected, the LOCAL_INV
is flushed and the FAST_REG_MR is flushed. This leaves the FRMR
valid with the old rkey. But rpcrdma_register_frmr_external() has
already bumped the in-memory rkey.
Next time through rpcrdma_register_frmr_external(), a LOCAL_INV and
FAST_REG_MR is attempted again because the FRMR is still valid. But
the rkey no longer matches the hardware's rkey, and a memory
management operation error occurs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a LOCAL_INV Work Request is flushed, it leaves an FRMR in the
VALID state. This FRMR can be returned by rpcrdma_buffer_get(), and
must be knocked down in rpcrdma_register_frmr_external() before it
can be re-used.
Instead, capture these in rpcrdma_buffer_get(), and reset them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
FAST_REG_MR Work Requests update a Memory Region's rkey. Rkey's are
used to block unwanted access to the memory controlled by an MR. The
rkey is passed to the receiver (the NFS server, in our case), and is
also used by xprtrdma to invalidate the MR when the RPC is complete.
When a FAST_REG_MR Work Request is flushed after a transport
disconnect, xprtrdma cannot tell whether the WR actually hit the
adapter or not. So it is indeterminant at that point whether the
existing rkey is still valid.
After the transport connection is re-established, the next
FAST_REG_MR or LOCAL_INV Work Request against that MR can sometimes
fail because the rkey value does not match what xprtrdma expects.
The only reliable way to recover in this case is to deregister and
register the MR before it is used again. These operations can be
done only in a process context, so handle it in the transport
connect worker.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the rb_mws list is exhausted, clean up and return NULL so that
call_allocate() will delay and try again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
During connection loss recovery, need to visit every MW in a
buffer pool. Any MW that is in use by an RPC will not be on the
rb_mws list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If posting a FAST_REG_MR Work Reqeust fails, revert the rkey update
to avoid subsequent IB_WC_MW_BIND_ERR completions.
Suggested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean ups:
- make it obvious that the rl_mw field is a pointer -- allocated
separately, not as part of struct rpcrdma_mr_seg
- promote "struct {} frmr;" to a named type
- promote the state enum to a named type
- name the MW state field the same way other fields in
rpcrdma_mw are named
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If FRMR registration fails, it's likely to transition the QP to the
error state. Or, registration may have failed because the QP is
_already_ in ERROR.
Thus calling rpcrdma_deregister_external() in
rpcrdma_create_chunks() is useless in FRMR mode: the LOCAL_INVs just
get flushed.
It is safe to leave existing registrations: when FRMR registration
is tried again, rpcrdma_register_frmr_external() checks if each FRMR
is already/still VALID, and knocks it down first if it is.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtrdma is currently throwing away queued completions during
a reconnect. RPC replies posted just before connection loss, or
successful completions that change the state of an FRMR, can be
missed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Various reports of:
rpcrdma_qp_async_error_upcall: QP error 3 on device mlx4_0
ep ffff8800bfd3e848
Ensure that rkeys in already-marshalled RPC/RDMA headers are
refreshed after the QP has been replaced by a reconnect.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=249
Suggested-by: Selvin Xavier <Selvin.Xavier@Emulex.Com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When the client uses physical memory registration, each page in the
payload gets its own array entry in the RPC/RDMA header's chunk list.
Therefore, don't advertise a maximum payload size that would require
more array entries than can fit in the RPC buffer where RPC/RDMA
headers are built.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure ia->ri_id remains valid while invoking dma_unmap_page() or
posting LOCAL_INV during a transport reconnect. Otherwise,
ia->ri_id->device or ia->ri_id->qp is NULL, which triggers a panic.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=259
Fixes: ec62f40 'xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
seg1->mr_nsegs is not yet initialized when it is used to unmap
segments during an error exit. Use the same unmapping logic for
all error exits.
"if (frmr_wr.wr.fast_reg.length < len) {" used to be a BUG_ON check.
The broken code will never be executed under normal operation.
Fixes: c977dea (xprtrdma: Remove BUG_ON() call sites)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An FDB entry with vlan_id 0 doesn't mean it is used in vlan 0, but used when
vlan_filtering is disabled.
There is inconsistency around NDA_VLAN whose payload is 0 - even if we add
an entry by RTM_NEWNEIGH without any NDA_VLAN, and even though adding an
entry with NDA_VLAN 0 is prohibited, we get an entry with NDA_VLAN 0 by
RTM_GETNEIGH.
Dumping an FDB entry with vlan_id 0 shouldn't include NDA_VLAN.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, the kernel oopses in nla_for_each_nested when iterating over
the unset attribute NFTA_SET_ELEM_LIST_ELEMENTS in the
nf_tables_{new,del}setelem() path.
netlink: 65524 bytes leftover after parsing attributes in process `nft'.
[...]
Oops: 0000 [#1] SMP
[...]
CPU: 2 PID: 6287 Comm: nft Not tainted 3.16.0-rc2+ #169
RIP: 0010:[<ffffffffa0526e61>] [<ffffffffa0526e61>] nf_tables_newsetelem+0x82/0xec [nf_tables]
[...]
Call Trace:
[<ffffffffa05178c4>] nfnetlink_rcv+0x2e7/0x3d7 [nfnetlink]
[<ffffffffa0517939>] ? nfnetlink_rcv+0x35c/0x3d7 [nfnetlink]
[<ffffffff8137d300>] netlink_unicast+0xf8/0x17a
[<ffffffff8137d6a5>] netlink_sendmsg+0x323/0x351
[...]
Fix this by returning -EINVAL if this attribute is not set, which
doesn't make sense at all since those commands are there to add and to
delete elements from the set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bit helper functions were used for manipulation with NFACCT_F_OVERQUOTA,
but they are accepting pit position, but not a bit mask. As a result
not a third bit for NFACCT_F_OVERQUOTA was set, but forth. Such
behaviour was dangarous and could lead to unexpected overquota report
result.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2014-07-30
This is the last pull request for ipsec-next before I'll be
off for two weeks starting on friday. David, can you please
take urgent ipsec patches directly into net/net-next during
this time?
1) Error handling simplifications for vti and vti6.
From Mathias Krause.
2) Remove a duplicate semicolon after a return statement.
From Christoph Paasch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_unattached_filter_destroy() does not always need to release the
filter object via rcu. Since this filter is never attached to the
socket, the caller should be responsible for releasing the filter
in a safe way, which may not necessarily imply rcu.
This is a short summary of clients of this function:
1) xt_bpf.c and cls_bpf.c use the bpf matchers from rules, these rules
are removed from the packet path before the filter is released. Thus,
the framework makes sure the filter is safely removed.
2) In the ppp driver, the ppp_lock ensures serialization between the
xmit and filter attachment/detachment path. This doesn't use rcu
so deferred release via rcu makes no sense.
3) In the isdn/ppp driver, it is called from isdn_ppp_release()
the isdn_ppp_ioctl(). This driver uses mutex and spinlocks, no rcu.
Thus, deferred rcu makes no sense to me either, the deferred releases
may be just masking the effects of wrong locking strategy, which
should be fixed in the driver itself.
4) In the team driver, this is the only place where the rcu
synchronization with unattached filter is used. Therefore, this
patch introduces synchronize_rcu() which is called from the
genetlink path to make sure the filter doesn't go away while packets
are still walking over it. I think we can revisit this once struct
bpf_prog (that only wraps specific bpf code bits) is in place, then
add some specific struct rcu_head in the scope of the team driver if
Jiri thinks this is needed.
Deferred rcu release for unattached filters was originally introduced
in 302d663 ("filter: Allow to create sk-unattached filters").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need for the unlikely(), WARN_ON() and BUG_ON() internally use
unlikely() on the condition.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In vegas we do a multiplication of the cwnd and the rtt. This
may overflow and thus their result is stored in a u64. However, we first
need to cast the cwnd so that actually 64-bit arithmetic is done.
Then, we need to do do_div to allow this to be used on 32-bit arches.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Doug Leith <doug.leith@nuim.ie>
Fixes: 8d3a564da3 (tcp: tcp_vegas cong avoid fix)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
In veno we do a multiplication of the cwnd and the rtt. This
may overflow and thus their result is stored in a u64. However, we first
need to cast the cwnd so that actually 64-bit arithmetic is done.
A first attempt at fixing 76f1017757 ([TCP]: TCP Veno congestion
control) was made by 159131149c (tcp: Overflow bug in Vegas), but it
failed to add the required cast in tcp_veno_cong_avoid().
Fixes: 76f1017757 ([TCP]: TCP Veno congestion control)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current explanation of dcb_app->priority is wrong. It says priority is
expected to be a 3-bit unsigned integer which is only true when working with
DCBx-IEEE. Use of dcb_app->priority by DCBx-CEE expects it to be 802.1p user
priority bitmap. Updated accordingly
This affects the cxgb4 driver, but I will post those changes as part of a
larger changeset shortly.
Fixes: 3e29027af4 ("dcbnl: add support for ieee8021Qaz attributes")
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ipv4 tunnels created with "local any remote $ip" didn't work properly since
7d442fab0 (ipv4: Cache dst in tunnels). 99% of packets sent via those tunnels
had src addr = 0.0.0.0. That was because only dst_entry was cached, although
fl4.saddr has to be cached too. Every time ip_tunnel_xmit used cached dst_entry
(tunnel_rtable_get returned non-NULL), fl4.saddr was initialized with
tnl_params->saddr (= 0 in our case), and wasn't changed until iptunnel_xmit().
This patch adds saddr to ip_tunnel->dst_cache, fixing this issue.
Reported-by: Sergey Popov <pinkbyte@gentoo.org>
Signed-off-by: Dmitry Popov <ixaphire@qrator.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we're not bondable we should never send any other SSP
authentication requirement besides one of the non-bonding ones.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This setting maps to the HCI_BONDABLE flag which tracks whether we're
bondable or not. Therefore, rename the mgmt setting and respective
command accordingly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The HCI_PAIRABLE flag isn't actually controlling whether we're pairable
but whether we're bondable. Therefore, rename it accordingly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The new leds bit handling produces this spares warning.
CHECK net/bluetooth/hidp/core.c
net/bluetooth/hidp/core.c:156:60: warning: dubious: x | !y
Just fix it by doing an explicit x << 0 shift operation.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Both BT_CONNECTED and BT_CONFIG state mean that we have a baseband link
available. We should therefore check for either of these when pairing
and deciding whether to call hci_conn_security() directly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
CHECK: braces {} should be used on all arms of this statement
+ if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I)
[...]
+ else {
[...]
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
WARNING: Missing a blank line after declarations
+ struct sk_buff *new;
+ if (uncompress_udp_header(skb, &uh))
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes all the issues with alignment matching of open
parenthesis found by checkpatch.pl and makes them follow the
network coding style now.
CHECK: Alignment should match open parenthesis
+static int uncompress_addr(struct sk_buff *skb,
+ struct in6_addr *ipaddr, const u8 address_mode,
CHECK: Alignment should match open parenthesis
+static int uncompress_context_based_src_addr(struct sk_buff *skb,
+ struct in6_addr *ipaddr,
CHECK: Alignment should match open parenthesis
+static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
+ struct net_device *dev, skb_delivery_cb deliver_skb)
CHECK: Alignment should match open parenthesis
+ new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
+ GFP_ATOMIC);
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb data dump before receiving",
+ new->data, new->len);
CHECK: Alignment should match open parenthesis
+lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
+ struct in6_addr *ipaddr,
CHECK: Alignment should match open parenthesis
+ raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is",
+ ipaddr->s6_addr, 16);
CHECK: Alignment should match open parenthesis
+int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
+ const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb data dump uncompressed",
+ skb->data, skb->len);
CHECK: Alignment should match open parenthesis
+ err = uncompress_addr(skb, &hdr.saddr, tmp, saddr,
+ saddr_type, saddr_len);
CHECK: Alignment should match open parenthesis
+ err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
+ daddr_type, daddr_len);
CHECK: Alignment should match open parenthesis
+ pr_debug("dest: stateless compression mode %d dest %pI6c\n",
+ tmp, &hdr.daddr);
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw UDP header dump",
+ (u8 *)&uh, sizeof(uh));
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw header dump", (u8 *)&hdr,
+ sizeof(hdr));
CHECK: Alignment should match open parenthesis
+int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type, const void *_daddr,
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb network header dump",
+ skb_network_header(skb), sizeof(struct ipv6hdr));
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__,
+ "sending raw skb network uncompressed packet",
CHECK: Alignment should match open parenthesis
+ if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+ (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {
WARNING: quoted string split across lines
+ pr_debug("dest address unicast link-local %pI6c "
+ "iphc1 0x%02x\n", &hdr->daddr, iphc1);
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb data dump compressed",
+ skb->data, skb->len);
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes all the block comment issues found by checkpatch.pl and
makes them match the network style now.
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Based on patches from Jon Smirl <jonsmirl@gmail.com>
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source and
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source context
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * UDP lenght needs to be infered from the lower layers
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Traffic Class and FLow Label carried in-line
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Traffic class carried in-line
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Flow Label carried in-line
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * replace the compressed UDP head by the uncompressed UDP
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * As we copy some bit-length fields, in the IPHC encoding bytes,
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Traffic class, flow label
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Hop limit
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This memory is placed on stack and can't be null so remove the check on
null.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch removes the own implementation to check of link-layer,
broadcast and any address type and use the IPv6 api for that.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch uses the lowpan_push_hc_data functions in several places
where we can use it. The lowpan_push_hc_data was introduced in some
previous patches.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We introduced the lowpan_fetch_skb function in some previous patches for
6lowpan to have a generic fetch function. This patch drops the old
function and use the generic lowpan_fetch_skb one.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The hc06_ptr pointer variable stands for header compression draft-06. We
are mostly rfc complaint. This patch rename the variable to normal hc_ptr.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
NFNL_MSG_ACCT_GET_CTRZERO modifies dumped flags, in this case
client see unmodified (uncleared) counter value and cleared
overquota state - end user doesn't know anything about overquota state,
unless end user subscribed on overquota report.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The synchronous syncrhonize_rcu in switch_task_namespaces makes setns
a sufficiently expensive system call that people have complained.
Upon inspect nsproxy no longer needs rcu protection for remote reads.
remote reads are rare. So optimize for same process reads and write
by switching using rask_lock instead.
This yields a simpler to understand lock, and a faster setns system call.
In particular this fixes a performance regression observed
by Rafael David Tinoco <rafael.tinoco@canonical.com>.
This is effectively a revert of Pavel Emelyanov's commit
cf7b708c8d Make access to task's nsproxy lighter
from 2007. The race this originialy fixed no longer exists as
do_notify_parent uses task_active_pid_ns(parent) instead of
parent->nsproxy.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sparse warns because of implicit pointer cast.
v2: subject line correction, space between "void" and "*"
Signed-off-by: Karoly Kemeny <karoly.kemeny@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
