virtio device id value can be more than 31. Hence, use BIT_ULL in
assignment.
Fixes: 33b347503f ("vdpa: Define vdpa mgmt device, ops and a netlink interface")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211130042949.88958-1-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This condition checks "len" but it does not check "offset" and that
could result in an out of bounds read if "offset > dev->config_size".
The problem is that since both variables are unsigned the
"dev->config_size - offset" subtraction would result in a very high
unsigned value.
I think these checks might not be necessary because "len" and "offset"
are supposed to already have been validated using the
vhost_vdpa_config_validate() function. But I do not know the code
perfectly, and I like to be safe.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211208150956.GA29160@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
The "config.offset" comes from the user. There needs to a check to
prevent it being out of bounds. The "config.offset" and
"dev->config_size" variables are both type u32. So if the offset if
out of bounds then the "dev->config_size - config.offset" subtraction
results in a very high u32 value. The out of bounds offset can result
in memory corruption.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211208103307.GA3778@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together.
Cc: stable@vger.kernel.org
Fixes: 4080fc1067 ("vdpa_sim: use iova module to allocate IOVA addresses")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hardening work by Jason
vdpa driver for Alibaba ENI
Performance tweaks for virtio blk
virtio rng rework using an internal buffer
mac/mtu programming for mlx5 vdpa
Misc fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmF/su8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpo+sIAJjBTvbET+d0KuIMt8YBGsU+NWgHaJxW06hm
GHZzinueZYWaS20MPMYMPfcHUgigWj0kk7F0gMljG5rtDFzR85JkOi7+e5V6RVJW
8SQc7JjA1Krde6EiPJdlv3mVkLz/5VbrGUgjAW9di/O04Xc/jAc9kmJ41wTYr0mL
E5IsUi9QBmgHtKQ+2ofb9QEWuebJclGK+NVd3Kp08BtAQOrdn5UrIzY30/sjkZwE
ul2ll6v/k7T3dCQbHD/wMgfFycPvoZVfxaVj+FWQnwdWkqZwzMRmpKPRes4KJfww
Lfx1qox10mJzH7XJCs7xmOM8f7HgNNWi0gD5FxNlfkiz1AwHYOk=
=DTXY
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost and virtio fixes and features:
- Hardening work by Jason
- vdpa driver for Alibaba ENI
- Performance tweaks for virtio blk
- virtio rng rework using an internal buffer
- mac/mtu programming for mlx5 vdpa
- Misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
vdpa/mlx5: Forward only packets with allowed MAC address
vdpa/mlx5: Support configuration of MAC
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
vdpa_sim_net: Enable user to set mac address and mtu
vdpa: Enable user to set mac and mtu of vdpa device
vdpa: Use kernel coding style for structure comments
vdpa: Introduce query of device config layout
vdpa: Introduce and use vdpa device get, set config helpers
virtio-scsi: don't let virtio core to validate used buffer length
virtio-blk: don't let virtio core to validate used length
virtio-net: don't let virtio core to validate used length
virtio_ring: validate used buffer length
virtio_blk: correct types for status handling
virtio_blk: allow 0 as num_request_queues
i2c: virtio: Add support for zero-length requests
virtio-blk: fixup coccinelle warnings
virtio_ring: fix typos in vring_desc_extra
virtio-pci: harden INTX interrupts
virtio_pci: harden MSI-X interrupts
virtio_config: introduce a new .enable_cbs method
...
Add rules to forward packets to the net device's TIR only if the
destination MAC is equal to the configured MAC. This is required to
prevent the netdevice from receiving traffic not destined to its
configured MAC.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20211026175519.87795-9-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add code to accept MAC configuration through vdpa tool. The MAC is
written into the config struct and later can be retrieved through
get_config().
Examples:
1. Configure MAC while adding a device:
$ vdpa dev add mgmtdev pci/0000:06:00.2 name vdpa0 mac 00:11:22:33:44:55
2. Show configured params:
$ vdpa dev config show
vdpa0: mac 00:11:22:33:44:55 link down link_announce false max_vq_pairs 8 mtu 1500
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-8-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cited patch in the fixes tag clears the features bit during reset.
mlx5 vdpa device feature bits are static decided by device capabilities.
These feature bits (including VIRTIO_NET_F_MAC) are initialized during
device addition time.
Clearing features bit in reset callback cleared the VIRTIO_NET_F_MAC. Due
to this, MAC address provided by the device is not honored.
Fix it by not clearing the static feature bits during reset.
Fixes: 0686082dbf ("vdpa: Add reset callback in vdpa_config_ops")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211026175519.87795-7-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Enable user to set the mac address and mtu so that each vdpa device
can have its own user specified mac address and mtu.
Now that user is enabled to set the mac address, remove the module
parameter for same.
And example of setting mac addr and mtu and view the configuration:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Introduce a command to query a device config layout.
An example query of network vdpa device:
$ vdpa dev add name bar mgmtdev vdpasim_net
$ vdpa dev config show
bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:35:09:19:48:05",
"link ": "up",
"link_announce ": false,
"mtu": 1500,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Subsequent patches enable get and set configuration either
via management device or via vdpa device' config ops.
This requires synchronization between multiple callers to get and set
config callbacks. Features setting also influence the layout of the
configuration fields endianness.
To avoid exposing synchronization primitives to callers, introduce
helper for setting the configuration and use it.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add code to register to hardware asynchronous events. Use this
mechanism to track link status events coming from the device and update
the config struct.
After doing link status change, call the vdpa callback to notify of the
link status change.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
A subesequent patch will use the same workqueue for executing other
work not related to control VQ. Rename the workqueue and the work queue
entry used to convey information to the workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
No need to save the mtu int the net device struct. We can save it in the
config struct which cannot be modified.
Moreover, move the initialization to. mlx5_vdpa_set_features() callback
is not the right place to put it.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The interrupt might be triggered after a reset since there is
no synchronization between resetting and irq injecting. And it
might break something if the interrupt is delayed until a new
round of device initialization.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210929083050.88-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The interrupt callback should not be triggered before DRIVER_OK
is set. Otherwise, it might break the virtio device driver.
So let's add a check to avoid the unexpected behavior.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210923075722.98-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In mlx5_core and vdpa there is no use of mlx5_core_mkey members except
for the key itself.
As preparation for moving mlx5_core_mkey to mlx5_ib, the occurrences of
struct mlx5_core_mkey in all modules except for mlx5_ib are replaced by
a u32 key.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
There is no read of mkey->pd, only write. Remove it.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
mkey->size is already stored in ibmr->length, no need to store it here.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
iova is already stored in ibmr->iova, no need to store it here.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Avoid executing set_vq_ready() if the device has been reset. In such
case, the features are cleared and cannot be used in conditional
statements. Such reference happens is the function ctrl_vq_idx().
Fixes: 52893733f2 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909063738.46970-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When clearing VQs ready indication for the data VQs, do the same for the
control VQ.
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909063652.46880-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We should cleanup the old kernel states e.g. interrupt callback
no matter whether the userspace handle the reset correctly or not
since virtio-vdpa can't handle the reset failure now.
Otherwise, the old state might be used after reset which might
break something, e.g. the old interrupt callback might be triggered
by userspace after reset, which can break the virtio device driver.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210906142158.181-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This should return -ENOMEM if alloc_workqueue() fails. Currently it
returns success.
Fixes: b66219796563 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210907073223.GA18254@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
VDUSE (vDPA Device in Userspace) is a framework to support
implementing software-emulated vDPA devices in userspace. This
document is intended to clarify the VDUSE design and usage.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-14-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This VDUSE driver enables implementing software-emulated vDPA
devices in userspace. The vDPA device is created by
ioctl(VDUSE_CREATE_DEV) on /dev/vduse/control. Then a char device
interface (/dev/vduse/$NAME) is exported to userspace for device
emulation.
In order to make the device emulation more secure, the device's
control path is handled in kernel. A message mechnism is introduced
to forward some dataplane related control messages to userspace.
And in the data path, the DMA buffer will be mapped into userspace
address space through different ways depending on the vDPA bus to
which the vDPA device is attached. In virtio-vdpa case, the MMU-based
software IOTLB is used to achieve that. And in vhost-vdpa case, the
DMA buffer is reside in a userspace memory region which can be shared
to the VDUSE userspace processs via transferring the shmfd.
For more details on VDUSE design and usage, please see the follow-on
Documentation commit.
NB(mst): when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
replace eventfd_signal_count with eventfd_signal_allowed,
and drop the previous
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-13-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements an MMU-based software IOTLB to support mapping
kernel dma buffer into userspace dynamically. The basic idea
behind it is treating MMU (VA->PA) as IOMMU (IOVA->PA). The
software IOTLB will set up MMU mapping instead of IOMMU mapping
for the DMA transfer so that the userspace process is able to
use its virtual address to access the dma buffer in kernel.
To avoid security issue, a bounce-buffering mechanism is
introduced to prevent userspace accessing the original buffer
directly which may contain other kernel data. During the mapping,
unmapping, the software IOTLB will copy the data from the original
buffer to the bounce buffer and back, depending on the direction
of the transfer. And the bounce-buffer addresses will be mapped
into the user address space instead of the original one.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-12-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add an opaque pointer for DMA mapping.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The size passed to alloc_iova() should be the size of page frames.
Now we use byte granularity for the iova domain, so it's safe to
pass the size in bytes to alloc_iova(). But it would be better to use
iova_shift() for the size to avoid future bugs if we change granularity.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210809100923.38-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Multiqueue support requires additional virtio_net_q objects to be added
or removed per the configured number of queue pairs. In addition the RQ
tables needs to be modified to match the number of configured receive
queues so the packets are dispatched to the right virtqueue according to
the hash result.
Note: qemu v6.0.0 is broken when the device requests more than two data
queues; no net device will be created for the vdpa device. To avoid
this, one should specify mq=off to qemu. In this case it will end up
with a single queue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-7-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to handle control virtqueue configurations per virtio
specification. The control virtqueue is implemented in software and no
hardware offloading is involved.
Control VQ configuration need task context, therefore all configurations
are handled in a workqueue created for the purpose.
Modifications are made to the memory registration code to allow for
saving a copy of itolb to be used by the control VQ to access the vring.
The max number of data virtqueus supported by the driver has been
updated to 2 since multiqueue is not supported at this stage and we need
to ensure consistency of VQ indices mapping to either data or control
VQ.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following patches add control virtuqeue and multiqueue support. We want
to verify that the index value to callbacks referencing a virtqueue is
valid.
The logic defining valid indices is as follows:
CVQ clear: 0 and 1.
CVQ set, MQ clear: 0, 1 and 2
CVQ set, MQ set: 0..nvq where nvq is whatever provided to
_vdpa_register_device()
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead, define an array of struct vdpa_callback on struct mlx5_vdpa_net
and use it to store callbacks for any virtqueue provided. This is
required due to the fact that callback configurations arrive before feature
negotiation. With control VQ and multiqueue introduced next we want to
save the information until after feature negotiation where we know the
CVQ index.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use struct mlx5_vdpa_dev as an argument to setup_driver() and a few
others in preparation to control virtqueue support in a subsequent
patch. The control virtqueue is part of struct mlx5_vdpa_dev so this is
required.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enbales multi-queue and control vq
features for ifcvf
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210818095714.3220-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
To enable this multi-queue feature for ifcvf, this commit
intends to detect and use the onboard number of queues
directly than IFCVF_MAX_QUEUE_PAIRS = 1 (removed)
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210818095714.3220-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This commit implements the management netlink framework for ifcvf,
including register and add / remove a device
It works with iproute2:
[root@localhost lszhu]# vdpa mgmtdev show -jp
{
"mgmtdev": {
"pci/0000:01:00.5": {
"supported_classes": [ "net" ]
},
"pci/0000:01:00.6": {
"supported_classes": [ "net" ]
}
}
}
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.5 name vdpa0
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.6 name vdpa1
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a new function get_dev_type() which returns
the virtio device id of a device, to avoid duplicated code.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
