Commit Graph

526 Commits

Author SHA1 Message Date
Christoph Hellwig
c34b7ac650 block: remove bio_set_op_attrs
This macro is obsolete, so replace the last few uses with open coded
bi_opf assignments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de <mailto:colyli@suse.de>>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221206144057.720846-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 09:43:12 -07:00
Jiang Li
b611ad1400 md/raid1: stop mdx_raid1 thread when raid1 array run failed
fail run raid1 array when we assemble array with the inactive disk only,
but the mdx_raid1 thread were not stop, Even if the associated resources
have been released. it will caused a NULL dereference when we do poweroff.

This causes the following Oops:
    [  287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070
    [  287.594762] #PF: supervisor read access in kernel mode
    [  287.599912] #PF: error_code(0x0000) - not-present page
    [  287.605061] PGD 0 P4D 0
    [  287.607612] Oops: 0000 [#1] SMP NOPTI
    [  287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G     U            5.10.146 #0
    [  287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022
    [  287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod]
    [  287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ......
    [  287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202
    [  287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000
    [  287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800
    [  287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff
    [  287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800
    [  287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500
    [  287.692052] FS:  0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000
    [  287.700149] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0
    [  287.713033] Call Trace:
    [  287.715498]  raid1d+0x6c/0xbbb [raid1]
    [  287.719256]  ? __schedule+0x1ff/0x760
    [  287.722930]  ? schedule+0x3b/0xb0
    [  287.726260]  ? schedule_timeout+0x1ed/0x290
    [  287.730456]  ? __switch_to+0x11f/0x400
    [  287.734219]  md_thread+0xe9/0x140 [md_mod]
    [  287.738328]  ? md_thread+0xe9/0x140 [md_mod]
    [  287.742601]  ? wait_woken+0x80/0x80
    [  287.746097]  ? md_register_thread+0xe0/0xe0 [md_mod]
    [  287.751064]  kthread+0x11a/0x140
    [  287.754300]  ? kthread_park+0x90/0x90
    [  287.757974]  ret_from_fork+0x1f/0x30

In fact, when raid1 array run fail, we need to do
md_unregister_thread() before raid1_free().

Signed-off-by: Jiang Li <jiang.li@ugreen.com>
Signed-off-by: Song Liu <song@kernel.org>
2022-11-14 10:15:35 -08:00
Bart Van Assche
3c5e514db5 md/raid1: Use the new blk_opf_t type
Improve static type checking by using the new blk_opf_t type for
variables that represent request flags.

Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-35-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 12:14:31 -06:00
Bart Van Assche
4ce4c73f66 md/core: Combine two sync_page_io() arguments
Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.

Cc: Song Liu <song@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 12:14:31 -06:00
Christoph Hellwig
900d156bac block: remove bdevname
Replace the remaining calls of bdevname with snprintf using the %pg
format specifier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 10:27:56 -06:00
Christoph Hellwig
913cce5a1e md: remove most calls to bdevname
Use the %pg format specifier to save on stack consumption and code size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
2022-05-22 23:07:21 -07:00
Mariusz Tkaczyk
9631abdbf4 md: Set MD_BROKEN for RAID1 and RAID10
There is no direct mechanism to determine raid failure outside
personality. It is done by checking rdev->flags after executing
md_error(). If "faulty" flag is not set then -EBUSY is returned to
userspace. -EBUSY means that array will be failed after drive removal.

Mdadm has special routine to handle the array failure and it is executed
if -EBUSY is returned by md.

There are at least two known reasons to not consider this mechanism
as correct:
1. drive can be removed even if array will be failed[1].
2. -EBUSY seems to be wrong status. Array is not busy, but removal
   process cannot proceed safe.

-EBUSY expectation cannot be removed without breaking compatibility
with userspace. In this patch first issue is resolved by adding support
for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in
next commit.

The idea is to set the MD_BROKEN if we are sure that raid is in failed
state now. This is done in each error_handler(). In md_error() MD_BROKEN
flag is checked. If is set, then -EBUSY is returned to userspace.

As in previous commit, it causes that #mdadm --set-faulty is able to
fail array. Previously proposed workaround is valid if optional
functionality[1] is disabled.

[1] commit 9a567843f7ce("md: allow last device to be forcibly removed from
    RAID1/RAID10.")

Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
2022-04-25 14:00:34 -07:00
Christoph Hellwig
70200574cc block: remove QUEUE_FLAG_DISCARD
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.

The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17 19:49:59 -06:00
Christoph Hellwig
10f0d2a517 block: add a bdev_nonrot helper
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17 19:49:59 -06:00
Christoph Hellwig
066ff57101 block: turn bio_kmalloc into a simple kmalloc wrapper
Remove the magic autofree semantics and require the callers to explicitly
call bio_init to initialize the bio.

This allows bio_free to catch accidental bio_put calls on bio_init()ed
bios as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17 19:30:41 -06:00
Linus Torvalds
561593a048 for-5.18/write-streams-2022-03-18
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI1AHwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplPjEACVJzKg5NkxpdkDThvq5tejws9KxB/4mHJg
 NoDMcv1TF+Orsd/HNW6XrgYnbU0ObHom3568/xb8BNegRVFe7V4ME/4IYNRyGOmV
 qbfciu04L1UkJhI52CIidkOioFABL3r1zgLCIz5vk0Cv9X7Le9x0UabHxJf7u9S+
 Z3lNdyxezN0SGx8VT86l/7lSoHtG3VHO9IsQCuNGF02SB+6uGpXBlptbEoQ4nTxd
 T7/H9FNOe2Wf7eKvcOOds8UlvZYAfYcY0GcRrIOXdHIy25mKFWwn5cDgFTMOH5ID
 xXpm+JFkDkrfSW1o4FFPxbN9Z6RbVXbGCsrXlIragLO2MJQdXiIUxS1OPT5oAado
 H9MlX6QtkwziLW9zUWa/N/jmRjc2vzHAxD6JFg/wXxNdtY0kd8TQpaxwTB8mVDPN
 VCGutt7lJS1CQInQ+ppzbdqzzuLHC1RHAyWSmfUE9rb8cbjxtJBnSIorYRLUesMT
 GRwqVTXW0osxSgCb1iDiBCJANrX1yPZcemv4Wh1gzbT6IE9sWxWXsE5sy9KvswNc
 M+E4nu/TYYTfkynItJjLgmDLOoi+V0FBY6ba0mRPBjkriSP4AVlwsZLGVsAHQzuA
 o5paW1GjRCCwhIQ6+AzZIoOz6wqvprBlUgUkUneyYAQ2ZKC3pZi8zPnpoVdFucVa
 VaTzP71C1Q==
 =efaq
 -----END PGP SIGNATURE-----

Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block

Pull NVMe write streams removal from Jens Axboe:
 "This removes the write streams support in NVMe. No vendor ever really
  shipped working support for this, and they are not interested in
  supporting it.

  With the NVMe support gone, we have nothing in the tree that supports
  this. Remove passing around of the hints.

  The only discussion point in this patchset imho is the fact that the
  file specific write hint setting/getting fcntl helpers will now return
  -1/EINVAL like they did before we supported write hints. No known
  applications use these functions, I only know of one prototype that I
  help do for RocksDB, and that's not used. That said, with a change
  like this, it's always a bit controversial. Alternatively, we could
  just make them return 0 and pretend it worked. It's placement based
  hints after all"

* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
  fs: remove fs.f_write_hint
  fs: remove kiocb.ki_hint
  block: remove the per-bio/request write hint
  nvme: remove support or stream based temperature hint
2022-03-26 11:51:46 -07:00
Linus Torvalds
6f2689a766 SCSI misc on 20220324
This series consists of the usual driver updates (qla2xxx, pm8001,
 libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
 and bug fixes.  The high blast radius core update is the removal of
 write same, which affects block and several non-SCSI devices.  The
 other big change, which is more local, is the removal of the SCSI
 pointer.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
 6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
 Ec1HDuUCE18H1H2QAh0=
 =/Ty9
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...
2022-03-24 19:37:53 -07:00
Linus Torvalds
69d1dea852 for-5.18/drivers-2022-03-18
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI0/QUQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpn8GEACRVxJaJV5qjZfoFAQKoAWJEtquwjeARyB+
 0V8ROWHDWHSacdug9wBytayiS1lz2zmUHJ6YXyts2dn0v6CrK4s8yGzk5G/RgH6+
 6M3GmBKjj+r1DfE8L3OoQWkDR1JFPuFxXTG/uBd7fBY2Excih1Z0D2lpspMleIRf
 w8zBrlWrWH8lZlm6HF3fadjEoiWhOM5F4Ofz3eg/PAQrHuD06z8hjQgMeR0jQVzw
 bWF9jrdNIplxRjNWIwCTsQRM+z5KQhUGwDODJjIwdQtVaKSt9D99ZbeKTudlslQ2
 zrizsCq8P1RjBPcrA45FV6QnT9DIRRGrYzHD63qC6fDae34rbzdSHUwRMP2XSxo8
 +hT1AzGypiBauODTPzHFtTskaQ0KibLznEanChh/ThySmNYcEVAljSx3Z5Vo81J+
 IqJYK2m3RESCFruy9w3U/P7qiXZmqYldPfjxAKq8ucg6x1PU3XRAVm7SI/i4l75D
 Crk1ujj2LJgsyxL6qMrK3XUavl1SJdzWeFSarcCt3m4m11EWWfYzmG8Yn8OE2CEZ
 a2CAyDsRi8CZ3hvkaMwigL4wBJjrrig8vyIgok3VrfCmYlNNqMQqM5Rw7vzjR3v1
 cKewI3rQjkFXEaveIXyGPTI/0Da4cT0DOfn/Mws9MDUXNPlFMNEDUZkPuzMywiTB
 2SWDLTe77g==
 =993h
 -----END PGP SIGNATURE-----

Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:

 - NVMe updates via Christoph:
      - add vectored-io support for user-passthrough (Kanchan Joshi)
      - add verbose error logging (Alan Adamson)
      - support buffered I/O on block devices in nvmet (Chaitanya
        Kulkarni)
      - central discovery controller support (Martin Belanger)
      - fix and extended the globally unique idenfier validation
        (Christoph)
      - move away from the deprecated IDA APIs (Sagi Grimberg)
      - misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
        Chaitanya Kulkarni)
      - add lockdep annotations for in-kernel sockets (Chris Leech)
      - use vmalloc for ANA log buffer (Hannes Reinecke)
      - kerneldoc fixes (Chaitanya Kulkarni)
      - cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
      - warn about shared namespaces without multipathing (Christoph)

 - MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
   Erik, Dirk)

 - loop cleanups and queue depth configuration (Chaitanya)

 - null_blk cleanups and fixes (Chaitanya)

 - Use descriptive init/exit names in virtio_blk (Randy)

 - Use bvec_kmap_local() in drivers (Christoph)

 - bcache fixes (Mingzhe)

 - xen blk-front persistent grant speedups (Juergen)

 - rnbd fix and cleanup (Gioh)

 - Misc fixes (Christophe, Colin)

* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
  virtio_blk: eliminate anonymous module_init & module_exit
  nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
  nvme: remove nvme_alloc_request and nvme_alloc_request_qid
  nvme: cleanup how disk->disk_name is assigned
  nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
  nvmet: use snprintf() with PAGE_SIZE in configfs
  nvmet: don't fold lines
  nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
  nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
  nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
  nvme-tcp: lockdep: annotate in-kernel sockets
  nvme-tcp: don't fold the line
  nvme-tcp: don't initialize ret variable
  nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
  nvme-multipath: use vmalloc for ANA log buffer
  xen/blkfront: speed up purge_persistent_grants()
  raid5: initialize the stripe_head embeeded bios as needed
  raid5-cache: statically allocate the recovery ra bio
  raid5-cache: fully initialize flush_bio when needed
  raid5-ppl: fully initialize the bio in ppl_new_iounit
  ...
2022-03-21 17:16:01 -07:00
Mariusz Tkaczyk
daae161fd2 md: raid1/raid10: drop pending_cnt
Those counters are not necessary after commit 11bb45e8aaf6 ("md: drop queue
limitation for RAID1 and RAID10"). Remove them from all code (conf and
plug structs). raid1_plug_cb and raid10_plug_cb are identical, so move
definition of raid1_plug_cb to common raid1-10 definitions and use it for
RAID10 too.

Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
2022-03-08 15:16:54 -08:00
Christoph Hellwig
c75e707fe1 block: remove the per-bio/request write hint
With the NVMe support for this gone, there are no consumers of these hints
left, so remove them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220304175556.407719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-07 12:45:57 -07:00
Christoph Hellwig
ac483eb375 raid1: stop using bio_devname
Use the %pg format specifier to save on stack consuption and code size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-07 06:42:33 -07:00
Christoph Hellwig
10fa225c33 scsi: md: Remove WRITE_SAME support
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Link: https://lore.kernel.org/r/20220209082828.2629273-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22 21:11:08 -05:00
Christoph Hellwig
abfc426d1b block: pass a block_device to bio_clone_fast
Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-04 07:43:18 -07:00
Christoph Hellwig
a7c50c9404 block: pass a block_device and opf to bio_reset
Pass the block_device that we plan to use this bio for and the
operation to bio_reset to optimize the assigment.  A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 07:50:00 -07:00
Christoph Hellwig
609be10667 block: pass a block_device and opf to bio_alloc_bioset
Pass the block_device and operation that we plan to use this bio for to
bio_alloc_bioset to optimize the assigment.  NULL/0 can be passed, both
for the passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.

Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02 07:49:59 -07:00
Linus Torvalds
c9193f48e9 for-5.17/drivers-2022-01-11
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmHd8EIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpnOKEADGpxp+Vntbm8nZI/PFP5fA2gUTZWgSVB4l
 axVTYW21pjSrsrAhGg2FIgBgL0tNkgxQnIPRn50YL8jT3pTkCEcR7kLbhEU7W/Ln
 7hrsBgFnsCBoCs38LvzXHZD69jtEtNRk1ijPMLo5iCcHkAyUVKa1glfeMwefuI5/
 Rl8SoueRXppvCfwNPptaAKiDsYVN8KCJPvvhlMNoKP5n1iTsNYJ/HVsLqfRnP0oc
 CR6eHaYceWGLER8tWtBlG2Qp40+cd/A320thkIlEpEKJPWE/ce5AUp0PYxVJbwjU
 qvO1tMYSya7gPiaVWRJcUeAgRFiivM/kTdDrGwiY9hpv/BQG7EAW5D9Xecz/M4UG
 BgNLfhe0aR9QssjPxITgyiy9sRpwwpnpoVONTu3slgXVTUVlOq0QT6LOTPR1B9A4
 ZjbHVCuI3eyrAOqD4IjYSqjHa6GjFLiKTh8Q0ZB/KJGX1eItLVLVdJfcfV4RkBIf
 6RZg9+7/mXaDxU74DZ2tfUhHT0sC5RS+5VFxpkhThVk9qRbVdZGGWAHcVOkMjk9B
 L4PCpJeuaR+rzXvCDOCOI5sHraa5F/IRhMaTu5sHj/MIuEpq1fqjaB7tWRvfm6HO
 4tepUtb++rS3/zFFQlZCLyjVk2o0p2b0viwPLjvsRqsBp1bVoO9mJIiyp6POmM3G
 UjxQS0vEDw==
 =k0IZ
 -----END PGP SIGNATURE-----

Merge tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:

 - mtip32xx pci cleanups (Bjorn)

 - mtip32xx conversion to generic power management (Vaibhav)

 - rsxx pci powermanagement cleanups (Bjorn)

 - Remove the rsxx driver. This hardware never saw much adoption, and
   it's been end of lifed for a while. (Christoph)

 - MD pull request from Song:
      - REQ_NOWAIT support (Vishal Verma)
      - raid6 benchmark optimization (Dirk Müller)
      - Fix for acct bioset (Xiao Ni)
      - Clean up max_queued_requests (Mariusz Tkaczyk)
      - PREEMPT_RT optimization (Davidlohr Bueso)
      - Use default_groups in kobj_type (Greg Kroah-Hartman)

 - Use attribute groups in pktcdvd and rnbd (Greg)

 - NVMe pull request from Christoph:
      - increment request genctr on completion (Keith Busch, Geliang
        Tang)
      - add a 'iopolicy' module parameter (Hannes Reinecke)
      - print out valid arguments when reading from /dev/nvme-fabrics
        (Hannes Reinecke)

 - Use struct_group() in drbd (Kees)

 - null_blk fixes (Ming)

 - Get rid of congestion logic in pktcdvd (Neil)

 - Floppy ejection hang fix (Tasos)

 - Floppy max user request size fix (Xiongwei)

 - Loop locking fix (Tetsuo)

* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
  md: use default_groups in kobj_type
  md: Move alloc/free acct bioset in to personality
  lib/raid6: Use strict priority ranking for pq gen() benchmarking
  lib/raid6: skip benchmark of non-chosen xor_syndrome functions
  md: fix spelling of "its"
  md: raid456 add nowait support
  md: raid10 add nowait support
  md: raid1 add nowait support
  md: add support for REQ_NOWAIT
  md: drop queue limitation for RAID1 and RAID10
  md/raid5: play nice with PREEMPT_RT
  block/rnbd-clt-sysfs: use default_groups in kobj_type
  pktcdvd: convert to use attribute groups
  block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
  nvme: add 'iopolicy' module parameter
  nvme: drop unused variable ctrl in nvme_setup_cmd
  nvme: increment request genctr on completion
  nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
  block: remove the rsxx driver
  rsxx: Drop PCI legacy power management
  ...
2022-01-12 10:35:23 -08:00
Vishal Verma
5aa705039c md: raid1 add nowait support
This adds nowait support to the RAID1 driver. It makes RAID1 driver
return with EAGAIN for situations where it could wait for eg:

  - Waiting for the barrier,

wait_barrier() fn is modified to return bool to support error for
wait barriers. It returns true in case of wait or if wait is not
required and returns false if wait was required but not performed
to support nowait.

Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
2022-01-06 08:37:02 -08:00
Mariusz Tkaczyk
a92ce0feff md: drop queue limitation for RAID1 and RAID10
As suggested by Neil Brown[1], this limitation seems to be
deprecated.

With plugging in use, writes are processed behind the raid thread
and conf->pending_count is not increased. This limitation occurs only
if caller doesn't use plugs.

It can be avoided and often it is (with plugging). There are no reports
that queue is growing to enormous size so remove queue limitation for
non-plugged IOs too.

[1] https://lore.kernel.org/linux-raid/162496301481.7211.18031090130574610495@noble.neil.brown.name

Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
2022-01-06 08:37:02 -08:00
Song Liu
46669e8616 md/raid1: fix missing bitmap update w/o WriteMostly devices
commit [1] causes missing bitmap updates when there isn't any WriteMostly
devices.

Detailed steps to reproduce by Norbert (which somehow didn't make to lore):

   # setup md10 (raid1) with two drives (1 GByte sparse files)
   dd if=/dev/zero of=disk1 bs=1024k seek=1024 count=0
   dd if=/dev/zero of=disk2 bs=1024k seek=1024 count=0

   losetup /dev/loop11 disk1
   losetup /dev/loop12 disk2

   mdadm --create /dev/md10 --level=1 --raid-devices=2 /dev/loop11 /dev/loop12

   # add bitmap (aka write-intent log)
   mdadm /dev/md10 --grow --bitmap=internal

   echo check > /sys/block/md10/md/sync_action

   root:# cat /sys/block/md10/md/mismatch_cnt
   0
   root:#

   # remove member drive disk2 (loop12)
   mdadm /dev/md10 -f loop12 ; mdadm /dev/md10 -r loop12

   # modify degraded md device
   dd if=/dev/urandom of=/dev/md10 bs=512 count=1

   # no blocks recorded as out of sync on the remaining member disk1/loop11
   root:# mdadm -X /dev/loop11 | grep Bitmap
             Bitmap : 16 bits (chunks), 0 dirty (0.0%)
   root:#

   # re-add disk2, nothing synced because of empty bitmap
   mdadm /dev/md10 --re-add /dev/loop12

   # check integrity again
   echo check > /sys/block/md10/md/sync_action

   # disk1 and disk2 are no longer in sync, reads return differend data
   root:# cat /sys/block/md10/md/mismatch_cnt
   128
   root:#

   # clean up
   mdadm -S /dev/md10
   losetup -d /dev/loop11
   losetup -d /dev/loop12
   rm disk1 disk2

Fix this by moving the WriteMostly check to the if condition for
alloc_behind_master_bio().

[1] commit fd3b6975e9 ("md/raid1: only allocate write behind bio for WriteMostly device")
Fixes: fd3b6975e9 ("md/raid1: only allocate write behind bio for WriteMostly device")
Cc: stable@vger.kernel.org # v5.12+
Cc: Guoqing Jiang <guoqing.jiang@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Norbert Warmuth <nwarmuth@t-online.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
2022-01-03 14:13:48 -08:00
Guoqing Jiang
2e94275ed5 md/raid1: use rdev in raid1_write_request directly
We already get rdev from conf->mirrors[i].rdev at the beginning of the
loop, so just use it.

Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:50:28 -06:00
Guoqing Jiang
fd3b6975e9 md/raid1: only allocate write behind bio for WriteMostly device
Commit 6607cd319b ("raid1: ensure write
behind bio has less than BIO_MAX_VECS sectors") tried to guarantee the
size of behind bio is not bigger than BIO_MAX_VECS sectors.

Unfortunately the same calltrace still could happen since an array could
enable write-behind without write mostly device.

To match the manpage of mdadm (which says "write-behind is only attempted
on drives marked as write-mostly"), we need to check WriteMostly flag to
avoid such unexpected behavior.

[1]. https://bugzilla.kernel.org/show_bug.cgi?id=213181#c25

Cc: stable@vger.kernel.org # v5.12+
Cc: Jens Stutte <jens@chianterastutte.eu>
Reported-by: Jens Stutte <jens@chianterastutte.eu>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:50:25 -06:00
Linus Torvalds
9a1d6c9e3f for-5.15/drivers-2021-08-30
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmEs6LsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpqnLD/9c8v7WTLjrDR6FLD8fHUmkwk9ss6OeyYJC
 Z62QOyk6BqNOu6FAwBax9wFaboXdUqOdpJU0PVQ7WJ5wBiCQ9DAZY6T+iwW0jE79
 +iOSqdXHVLAIyIM9GplzLH5AH3tx4445bX7fRWwWX1OgmSidkAhb25FusCvpcpHx
 1k+9dSLClLeHPR6jVT3k6tHv2RzPSw+/vYOggeWYA0YYPfoCx/Ft0uwO+PjKpvLQ
 Je5jASlLGYCXazswJBZgfjbroA97EuaLOmHHIHrwhkkFsbV6ewv6mlmanbMEs4fX
 Wh+axTt8so27g6gbw31EOcGsxTi0B37Jx9MOrSla6NdJoZkFE2sn6K+D5k4oeSrg
 QgYXL00U62eSgWmgSB0f0X081cQfI+FUMe5u5S368WdrgCPfaXl11zHw8nXw8gEW
 UvqR4zr3hQd4piXsIWl2bwZrmpPBCeB8iStLq3C92RLPFT6hJO3GM/ZmwTn+0HT0
 lMXzoEdkPywkKWi8aBbSgzXiGknNl8HAYnwMhcQjiHbYQOycGkI9pigJDNY9Ox1l
 fYHFSompmJ/XK8cIiU7QIglXEXJky5jQ89Ni0ryCstOaP20tPxWtkpOCgidXfNGz
 4lmQV8D5aBTUFs6ifPjXfiXUmDiU3SaxiFhAqaEkGII9BbkrNhlibB4LBAU+toi1
 Q0yGhGR/mg==
 =4uWF
 -----END PGP SIGNATURE-----

Merge tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:
 "Sitting on top of the core block changes, here are the driver changes
  for the 5.15 merge window:

   - NVMe updates via Christoph:
       - suspend improvements for devices with an HMB (Keith Busch)
       - handle double completions more gacefull (Sagi Grimberg)
       - cleanup the selects for the nvme core code a bit (Sagi Grimberg)
       - don't update queue count when failing to set io queues (Ruozhu Li)
       - various nvmet connect fixes (Amit Engel)
       - cleanup lightnvm leftovers (Keith Busch, me)
       - small cleanups (Colin Ian King, Hou Pu)
       - add tracing for the Set Features command (Hou Pu)
       - CMB sysfs cleanups (Keith Busch)
       - add a mutex_destroy call (Keith Busch)

   - remove lightnvm subsystem. It's served its purpose and ultimately
     led to zoned nvme support, we no longer need it (Christoph)

   - revert floppy O_NDELAY fix (Denis)

   - nbd fixes (Hou, Pavel, Baokun)

   - nbd locking fixes (Tetsuo)

   - nbd device removal fixes (Christoph)

   - raid10 rcu warning fix (Xiao)

   - raid1 write behind fix (Guoqing)

   - rnbd fixes (Gioh, Md Haris)

   - misc fixes (Colin)"

* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
  Revert "floppy: reintroduce O_NDELAY fix"
  raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
  md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
  nbd: remove nbd->destroy_complete
  nbd: only return usable devices from nbd_find_unused
  nbd: set nbd->index before releasing nbd_index_mutex
  nbd: prevent IDR lookups from finding partially initialized devices
  nbd: reset NBD to NULL when restarting in nbd_genl_connect
  nbd: add missing locking to the nbd_dev_add error path
  nvme: remove the unused NVME_NS_* enum
  nvme: remove nvm_ndev from ns
  nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
  block: nbd: add sanity check for first_minor
  nvmet: check that host sqsize does not exceed ctrl MQES
  nvmet: avoid duplicate qid in connect cmd
  nvmet: pass back cntlid on successful completion
  nvme-rdma: don't update queue count when failing to set io queues
  nvme-tcp: don't update queue count when failing to set io queues
  nvme-tcp: pair send_mutex init with destroy
  nvme: allow user toggling hmb usage
  ...
2021-08-30 19:01:46 -07:00
Guoqing Jiang
6607cd319b raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
We can't split write behind bio with more than BIO_MAX_VECS sectors,
otherwise the below call trace was triggered because we could allocate
oversized write behind bio later.

[ 8.097936] bvec_alloc+0x90/0xc0
[ 8.098934] bio_alloc_bioset+0x1b3/0x260
[ 8.099959] raid1_make_request+0x9ce/0xc50 [raid1]
[ 8.100988] ? __bio_clone_fast+0xa8/0xe0
[ 8.102008] md_handle_request+0x158/0x1d0 [md_mod]
[ 8.103050] md_submit_bio+0xcd/0x110 [md_mod]
[ 8.104084] submit_bio_noacct+0x139/0x530
[ 8.105127] submit_bio+0x78/0x1d0
[ 8.106163] ext4_io_submit+0x48/0x60 [ext4]
[ 8.107242] ext4_writepages+0x652/0x1170 [ext4]
[ 8.108300] ? do_writepages+0x41/0x100
[ 8.109338] ? __ext4_mark_inode_dirty+0x240/0x240 [ext4]
[ 8.110406] do_writepages+0x41/0x100
[ 8.111450] __filemap_fdatawrite_range+0xc5/0x100
[ 8.112513] file_write_and_wait_range+0x61/0xb0
[ 8.113564] ext4_sync_file+0x73/0x370 [ext4]
[ 8.114607] __x64_sys_fsync+0x33/0x60
[ 8.115635] do_syscall_64+0x33/0x40
[ 8.116670] entry_SYSCALL_64_after_hwframe+0x44/0xae

Thanks for the comment from Christoph.

[1]. https://bugs.archlinux.org/task/70992

Cc: stable@vger.kernel.org # v5.12+
Reported-by: Jens Stutte <jens@chianterastutte.eu>
Tested-by: Jens Stutte <jens@chianterastutte.eu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Song Liu <songliubraving@fb.com>
2021-08-27 15:12:14 -07:00
Jens Axboe
cc396d27d8 Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.14
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid10: properly indicate failure when ending a failed write request
2021-08-04 15:49:57 -06:00
Wei Shuyu
5ba03936c0 md/raid10: properly indicate failure when ending a failed write request
Similar to [1], this patch fixes the same bug in raid10. Also cleanup the
comments.

[1] commit 2417b9869b ("md/raid1: properly indicate failure when ending
                         a failed write request")
Cc: stable@vger.kernel.org
Fixes: 7cee6d4e60 ("md/raid10: end bio when the device faulty")
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Acked-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Song Liu <song@kernel.org>
2021-07-23 10:14:07 -07:00
Guoqing Jiang
a0159832e5 md/raid1: enable io accounting
For raid1, we record the start time between split bio and clone bio,
and finish the accounting in the final endio.

Also introduce start_time in r1bio accordingly.

Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Song Liu <song@kernel.org>
2021-06-14 22:32:07 -07:00
Guoqing Jiang
9b8ae7b938 md/raid1: rename print_msg with r1bio_existed
The caller of raid1_read_request could pass NULL or a valid pointer for
"struct r1bio *r1_bio", so it actually means whether r1_bio is existed
or not.

Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Song Liu <song@kernel.org>
2021-06-14 22:32:06 -07:00
Paul Clements
2417b9869b md/raid1: properly indicate failure when ending a failed write request
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.

Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).

Fixes: eeba6809d8 ("md/raid1: end bio when the device faulty")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Paul Clements <paul.clements@us.sios.com>
Signed-off-by: Song Liu <song@kernel.org>
2021-04-23 09:40:17 -07:00
Christoph Hellwig
a78f18da66 md: remove bio_alloc_mddev
bio_alloc_mddev is never called with a NULL mddev, and ->bio_set is
initialized in md_run, so it always must be initialized as well.  Just
open code the remaining call to bio_alloc_bioset.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:48 -07:00
Christoph Hellwig
309dca309f block: store a block_device pointer in struct bio
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device.  From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 18:17:20 -07:00
Christoph Hellwig
1c02fca620 block: remove the request_queue argument to the block_bio_remap tracepoint
The request_queue can trivially be derived from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Christoph Hellwig
21cf866145 writeback: remove bdi->congested_fn
Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures.  And
pktdvd is a deprecated driver that isn't useful in stack setup
either.  So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08 17:20:46 -06:00
Christoph Hellwig
ed00aabd5e block: rename generic_make_request to submit_bio_noacct
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 07:27:24 -06:00
David Jeffery
c91114c2b8 md/raid1: release pending accounting for an I/O only after write-behind is also finished
When using RAID1 and write-behind, md can deadlock when errors occur. With
write-behind, r1bio structs can be accounted by raid1 as queued but not
counted as pending. The pending count is dropped when the original bio is
returned complete but write-behind for the r1bio may still be active.

This breaks the accounting used in some conditions to know when the raid1
md device has reached an idle state. It can result in calls to
freeze_array deadlocking. freeze_array will never complete from a negative
"unqueued" value being calculated due to a queued count larger than the
pending count.

To properly account for write-behind, move the call to allow_barrier from
call_bio_endio to raid_end_bio_io. When using write-behind, md can call
call_bio_endio before all write-behind I/O is complete. Using
raid_end_bio_io for the point to call allow_barrier will release the
pending count at a point where all I/O for an r1bio, even write-behind, is
done.

Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13 11:22:31 -07:00
Guoqing Jiang
d0d2d8ba04 md/raid1: introduce wait_for_serialization
Previously, we call check_and_add_serial when serialization is
enabled for write IO, but it could allocate and free memory
back and forth.

Now, let's just get an element from memory pool with the new
function, then insert node to rb tree if no collision happens.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13 11:44:10 -08:00
Guoqing Jiang
025471f9f5 md/raid1: use bucket based mechanism for IO serialization
Since raid1 had already used bucket based mechanism to reduce
the conflict between write IO and resync IO, it is possible to
speed up performance for io serialization with refer to the
same mechanism.

To align with the barrier bucket mechanism, we created arrays
(with the same number of BARRIER_BUCKETS_NR) for spinlock, rb
tree and waitqueue. Then we can reduce lock competition with
multiple spinlocks, boost search performance with multiple rb
trees and also reduce thundering herd problem with multiple
waitqueues.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13 11:44:10 -08:00
Guoqing Jiang
69b00b5bb2 md: introduce a new struct for IO serialization
Obviously, IO serialization could cause the degradation of
performance a lot. In order to reduce the degradation, so a
rb interval tree is added in raid1 to speed up the check of
collision.

So, a rb root is needed in md_rdev, then abstract all the
serialize related members to a new struct (serial_in_rdev),
embed it into md_rdev.

Of course, we need to free the struct if it is not needed
anymore, so rdev/rdevs_uninit_serial are added accordingly.
And they should be called when destroty memory pool or can't
alloc memory.

And we need to consider to call mddev_destroy_serial_pool
in case serialize_policy/write-behind is disabled, bitmap
is destroyed or in __md_stop_writes.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13 11:44:10 -08:00
Guoqing Jiang
69df9cfc70 raid1: serialize the overlap write
Before dispatch write bio, raid1 array which enables
serialize_policy need to check if overlap exists between
this bio and previous on-flying bios. If there is overlap,
then it has to wait until the collision is disappeared.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13 11:44:09 -08:00
Guoqing Jiang
404659cf1e md: rename wb stuffs
Previously, wb_info_pool and wb_list stuffs are introduced
to address potential data inconsistence issue for write
behind device.

Now rename them to serial related name, since the same
mechanism will be used to address reorder overlap write
issue for raid1.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13 11:44:09 -08:00
Zhiqiang Liu
028288df63 md: raid1: check rdev before reference in raid1_sync_request func
In raid1_sync_request func, rdev should be checked before reference.

Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11 10:36:13 -08:00
Hannes Reinecke
5fa4f8bac9 md/raid1: avoid soft lockup under high load
As all I/O is being pushed through a kernel thread the softlockup
watchdog might be triggered under high load.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-11-11 16:32:22 -08:00
David Jeffery
775d78319f md: improve handling of bio with REQ_PREFLUSH in md_flush_request()
If pers->make_request fails in md_flush_request(), the bio is lost. To
fix this, pass back a bool to indicate if the original make_request call
should continue to handle the I/O and instead of assuming the flush logic
will push it to completion.

Convert md_flush_request to return a bool and no longer calls the raid
driver's make_request function.  If the return is true, then the md flush
logic has or will complete the bio and the md make_request call is done.
If false, then the md make_request function needs to keep processing like
it is a normal bio. Let the original call to md_handle_request handle any
need to retry sending the bio to the raid driver's make_request function
should it be needed.

Also mark md_flush_request and the make_request function pointer as
__must_check to issue warnings should these critical return values be
ignored.

Fixes: 2bc13b83e6 ("md: batch flush requests.")
Cc: stable@vger.kernel.org # # v4.19+
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-10-24 15:22:40 -07:00
Yufen Yu
07f1a6850c md/raid1: fail run raid1 array when active disk less than one
When run test case:
  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:
[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-03 14:52:03 -07:00
Hou Tao
449808a254 raid1: factor out a common routine to handle the completion of sync write
It's just code clean-up.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07 10:25:02 -07:00
Guoqing Jiang
9a567843f7 md: allow last device to be forcibly removed from RAID1/RAID10.
When the 'last' device in a RAID1 or RAID10 reports an error,
we do not mark it as failed.  This would serve little purpose
as there is no risk of losing data beyond that which is obviously
lost (as there is with RAID5), and there could be other sectors
on the device which are readable, and only readable from this device.
This in general this maximises access to data.

However the current implementation also stops an admin from removing
the last device by direct action.  This is rarely useful, but in many
case is not harmful and can make automation easier by removing special
cases.

Also, if an attempt to write metadata fails the device must be marked
as faulty, else an infinite loop will result, attempting to update
the metadata on all non-faulty devices.

So add 'fail_last_dev' member to 'struct mddev', then we can bypasses
the 'last disk' checks for RAID1 and RAID10, and control the behavior
per array by change sysfs node.

Signed-off-by: NeilBrown <neilb@suse.de>
[add sysfs node for fail_last_dev by Guoqing]
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07 10:25:02 -07:00