- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
This reverts commit effd58c95f.
blk_queue_split() is causing excessive IO splitting -- because
blk_max_size_offset() depends on 'chunk_sectors' limit being set and
if it isn't (as is the case for DM targets!) it falls back to
splitting on a 'max_sectors' boundary regardless of offset.
"Fix" this by reverting back to _not_ using blk_queue_split() in
dm_process_bio() for normal IO (reads and writes). Long-term fix is
still TBD but it should focus on training blk_max_size_offset() to
call into a DM provided hook (to call DM's max_io_len()).
Test results from simple misaligned IO test on 4-way dm-striped device
with chunksize of 128K and stripesize of 512K:
xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev
before this revert:
253,0 21 1 0.000000000 2206 Q R 224 + 4072 [xfs_io]
253,0 21 2 0.000008267 2206 X R 224 / 480 [xfs_io]
253,0 21 3 0.000010530 2206 X R 224 / 256 [xfs_io]
253,0 21 4 0.000027022 2206 X R 480 / 736 [xfs_io]
253,0 21 5 0.000028751 2206 X R 480 / 512 [xfs_io]
253,0 21 6 0.000033323 2206 X R 736 / 992 [xfs_io]
253,0 21 7 0.000035130 2206 X R 736 / 768 [xfs_io]
253,0 21 8 0.000039146 2206 X R 992 / 1248 [xfs_io]
253,0 21 9 0.000040734 2206 X R 992 / 1024 [xfs_io]
253,0 21 10 0.000044694 2206 X R 1248 / 1504 [xfs_io]
253,0 21 11 0.000046422 2206 X R 1248 / 1280 [xfs_io]
253,0 21 12 0.000050376 2206 X R 1504 / 1760 [xfs_io]
253,0 21 13 0.000051974 2206 X R 1504 / 1536 [xfs_io]
253,0 21 14 0.000055881 2206 X R 1760 / 2016 [xfs_io]
253,0 21 15 0.000057462 2206 X R 1760 / 1792 [xfs_io]
253,0 21 16 0.000060999 2206 X R 2016 / 2272 [xfs_io]
253,0 21 17 0.000062489 2206 X R 2016 / 2048 [xfs_io]
253,0 21 18 0.000066133 2206 X R 2272 / 2528 [xfs_io]
253,0 21 19 0.000067507 2206 X R 2272 / 2304 [xfs_io]
253,0 21 20 0.000071136 2206 X R 2528 / 2784 [xfs_io]
253,0 21 21 0.000072764 2206 X R 2528 / 2560 [xfs_io]
253,0 21 22 0.000076185 2206 X R 2784 / 3040 [xfs_io]
253,0 21 23 0.000077486 2206 X R 2784 / 2816 [xfs_io]
253,0 21 24 0.000080885 2206 X R 3040 / 3296 [xfs_io]
253,0 21 25 0.000082316 2206 X R 3040 / 3072 [xfs_io]
253,0 21 26 0.000085788 2206 X R 3296 / 3552 [xfs_io]
253,0 21 27 0.000087096 2206 X R 3296 / 3328 [xfs_io]
253,0 21 28 0.000093469 2206 X R 3552 / 3808 [xfs_io]
253,0 21 29 0.000095186 2206 X R 3552 / 3584 [xfs_io]
253,0 21 30 0.000099228 2206 X R 3808 / 4064 [xfs_io]
253,0 21 31 0.000101062 2206 X R 3808 / 3840 [xfs_io]
253,0 21 32 0.000104956 2206 X R 4064 / 4096 [xfs_io]
253,0 21 33 0.001138823 0 C R 4096 + 200 [0]
after this revert:
253,0 18 1 0.000000000 4430 Q R 224 + 3896 [xfs_io]
253,0 18 2 0.000018359 4430 X R 224 / 256 [xfs_io]
253,0 18 3 0.000028898 4430 X R 256 / 512 [xfs_io]
253,0 18 4 0.000033535 4430 X R 512 / 768 [xfs_io]
253,0 18 5 0.000065684 4430 X R 768 / 1024 [xfs_io]
253,0 18 6 0.000091695 4430 X R 1024 / 1280 [xfs_io]
253,0 18 7 0.000098494 4430 X R 1280 / 1536 [xfs_io]
253,0 18 8 0.000114069 4430 X R 1536 / 1792 [xfs_io]
253,0 18 9 0.000129483 4430 X R 1792 / 2048 [xfs_io]
253,0 18 10 0.000136759 4430 X R 2048 / 2304 [xfs_io]
253,0 18 11 0.000152412 4430 X R 2304 / 2560 [xfs_io]
253,0 18 12 0.000160758 4430 X R 2560 / 2816 [xfs_io]
253,0 18 13 0.000183385 4430 X R 2816 / 3072 [xfs_io]
253,0 18 14 0.000190797 4430 X R 3072 / 3328 [xfs_io]
253,0 18 15 0.000197667 4430 X R 3328 / 3584 [xfs_io]
253,0 18 16 0.000218751 4430 X R 3584 / 3840 [xfs_io]
253,0 18 17 0.000226005 4430 X R 3840 / 4096 [xfs_io]
253,0 18 18 0.000250404 4430 Q R 4120 + 176 [xfs_io]
253,0 18 19 0.000847708 0 C R 4096 + 24 [0]
253,0 18 20 0.000855783 0 C R 4120 + 176 [0]
Fixes: effd58c95f ("dm: always call blk_queue_split() in dm_process_bio()")
Cc: stable@vger.kernel.org
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
zero_page_range() dax operation is mandatory for dax devices. Right now
that check happens in dax_zero_page_range() function. Dan thinks that's
too late and its better to do the check earlier in alloc_dax().
I also modified alloc_dax() to return pointer with error code in it in
case of failure. Right now it returns NULL and caller assumes failure
happened due to -ENOMEM. But with this ->zero_page_range() check, I
need to return -EINVAL instead.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200401161125.GB9398@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch adds support for dax zero_page_range operation to dm targets.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20200228163456.1587-5-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We neither assign congested_fn for requested-based blk-mq device nor
implement it correctly. So fix both.
Also, remove incorrect comment from dm_init_normal_md_queue and rename
it to dm_init_congested_fn.
Fixes: 4aa9c692e0 ("bdi: separate out congested state into a separate struct")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The function dm_suspended returns true if the target is suspended.
However, when the target is being suspended during unload, it returns
false.
An example where this is a problem: the test "!dm_suspended(wc->ti)" in
writecache_writeback is not sufficient, because dm_suspended returns
zero while writecache_suspend is in progress. As is, without an
enhanced dm_suspended, simply switching from flush_workqueue to
drain_workqueue still emits warnings:
workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries
writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function
flushes the current work. However, the workqueue may re-queue itself and
flush_workqueue doesn't wait for re-queued works to finish. Because of
this - the function writecache_writeback continues execution after the
device was suspended and then concurrently with writecache_dtr, causing
a crash in writecache_writeback.
We must use drain_workqueue - that waits until the work and all re-queued
works finish.
As a prereq for switching to drain_workqueue, this commit fixes
dm_suspended to return true after the presuspend hook and before the
postsuspend hook - just like during a normal suspend. It allows
simplifying the dm-integrity and dm-writecache targets so that they
don't have to maintain suspended flags on their own.
With this change use of drain_workqueue() can be used effectively. This
change was tested with the lvm2 testsuite and cryptsetup testsuite and
the are no regressions.
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Reported-by: Corey Marthaler <cmarthal@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).
Otherwise generic_make_request() will crash simply by doing:
dmsetup create -n test
mount /dev/dm-N /mnt
While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.
Reported-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab3458 ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c38 ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.
This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.
For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().
Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.
This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.
Contains contributions from Matias Bjorling, Hans Holmberg and
Damien Le Moal.
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if we pass too high sector number to dm_table_find_target, it
returns zeroed dm_target structure and callers test if the structure is
zeroed with the macro dm_target_is_valid.
However, returning NULL is common practice to indicate errors.
This patch refactors the dm code, so that dm_table_find_target returns
NULL and its callers test the returned value for NULL. The macro
dm_target_is_valid is deleted. In alloc_targets, we no longer allocate an
extra zeroed target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
persistent memory device that allows a guest VM to use DAX mechanisms to
access a host-file with host-page-cache. It arranges for MAP_SYNC to
be disabled and instead triggers a host fsync() when a 'write-cache
flush' command is sent to the virtual disk device.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----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=uAMG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In
preparation of using vmalloc() for large report buffer and zone array
allocations used by this function, remove its "gfp_t gfp_mask" argument
and rely on the caller context to use memalloc_noio_save/restore() where
necessary (block layer zone revalidation and dm-zoned I/O error path).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch sets dax device 'DAXDEV_SYNC' flag if all the target
devices of device mapper support synchrononous DAX. If device
mapper consists of both synchronous and asynchronous dax devices,
we don't set 'DAXDEV_SYNC' flag.
'dm_table_supports_dax' is refactored to pass 'iterate_devices_fn'
as argument so that the callers can pass the appropriate functions.
Suggested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch adds 'DAXDEV_SYNC' flag which is set
for nd_region doing synchronous flush. This later
is used to disable MAP_SYNC functionality for
ext4 & xfs filesystem for devices don't support
synchronous flush.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM
target interface") incorrectly removed code from
__send_changing_extent_only() that is required to impose a per-target IO
boundary on IO that exceeds max_io_len_target_boundary(). Otherwise
"special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond
where allowed.
Fix this by restoring the max_io_len_target_boundary() limit in
__send_changing_extent_only()
Fixes: 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Michael Lass <bevan@bi-co.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pankaj reports that starting with commit ad428cdb52 "dax: Check the
end of the block-device capacity with dax_direct_access()" device-mapper
no longer allows dax operation. This results from the stricter checks in
__bdev_dax_supported() that validate that the start and end of a
block-device map to the same 'pagemap' instance.
Teach the dax-core and device-mapper to validate the 'pagemap' on a
per-target basis. This is accomplished by refactoring the
bdev_dax_supported() internals into generic_fsdax_supported() which
takes a sector range to validate. Consequently generic_fsdax_supported()
is suitable to be used in a device-mapper ->iterate_devices() callback.
A new ->dax_supported() operation is added to allow composite devices to
split and route upper-level bdev_dax_supported() requests.
Fixes: ad428cdb52 ("dax: Check the end of the block-device...")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
md->dax_dev defaults to NULL and there is no need to initialize it
if CONFIG_DAX_DRIVER is disabled.
Signed-off-by: Peng Wang <rocking@whu.edu.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.
The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector 10487808
The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.
Fix this by training DM core to disable DISCARD if the underlying
storage already did so.
Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.
Cc: stable@vger.kernel.org
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The limit was already incorporated to dm-crypt with commit 4e870e948f
("dm crypt: fix error with too large bios"), so we don't need to apply
it globally to all targets. The quantity BIO_MAX_PAGES * PAGE_SIZE is
wrong anyway because the variable ti->max_io_len it is supposed to be in
the units of 512-byte sectors not in bytes.
Reduction of the limit to 1048576 sectors could even cause data
corruption in rare cases - suppose that we have a dm-striped device with
stripe size 768MiB. The target will call dm_set_target_max_io_len with
the value 1572864. The buggy code would reduce it to 1048576. Now, the
dm-core will errorneously split the bios on 1048576-sector boundary
insetad of 1572864-sector boundary and pass these stripe-crossing bios
to the striped target.
Cc: stable@vger.kernel.org # v4.16+
Fixes: 8f50e35815 ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Do not just call blk_queue_split() if the bio is_abnormal_io().
Fixes: 568c73a355 ("dm: update dm_process_bio() to split bio if in ->make_request_fn()")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is no need to have DM core split discards on behalf of a DM target
now that blk_queue_split() handles splitting discards based on the
queue_limits. A DM target just needs to set max_discard_sectors,
discard_granularity, etc, in queue_limits.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Must call blk_queue_split() otherwise queue_limits for abnormal requests
(e.g. discard, writesame, etc) won't be imposed.
In addition, add dm_queue_split() to simplify DM specific splitting that
is needed for targets that impose ti->max_io_len.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
bio_trim() has an early return, which makes it _not_ idempotent, if the
offset is 0 and the bio's bi_size already matches the requested size.
Prior to DM, all users of bio_trim() were fine with this. But DM has
exposed the fact that bio_trim()'s early return is incompatible with a
cloned bio whose integrity payload must be trimmed via
bio_integrity_trim().
Fix this by reverting DM back to doing the equivalent of bio_trim() but
in an idempotent manner (so bio_integrity_trim is always performed).
Follow-on work is needed to assess what benefit bio_trim()'s early
return is providing to its existing callers.
Reported-by: Milan Broz <gmazyland@gmail.com>
Fixes: 57c36519e4 ("dm: fix clone_bio() to trigger blk_recount_segments()")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Block core changes to switch bio-based IO accounting to be percpu had a
side-effect of altering DM core to now rely on calling waitqueue_active
(in both bio-based and request-based) to check if another task is in
dm_wait_for_completion().
A memory barrier is needed before calling waitqueue_active(). DM core
doesn't piggyback on a preceding memory barrier so it must explicitly
use its own.
For more details on why using waitqueue_active() without a preceding
barrier is unsafe, please see the comment before the waitqueue_active()
definition in include/linux/wait.h.
Add the missing memory barrier by switching to using wq_has_sleeper().
Fixes: 6f75723190 ("dm: remove the pending IO accounting")
Fixes: c4576aed8d ("dm: fix request-based dm's use of dm_wait_for_completion")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The risk of redundant IO accounting was not taken into consideration
when commit 18a25da843 ("dm: ensure bio submission follows a
depth-first tree walk") introduced IO splitting in terms of recursion
via generic_make_request().
Fix this by subtracting the split bio's payload from the IO stats that
were already accounted for by start_io_acct() upon dm_make_request()
entry. This repeat oscillation of the IO accounting, up then down,
isn't ideal but refactoring DM core's IO splitting to pre-split bios
_before_ they are accounted turned out to be an excessive amount of
change that will need a full development cycle to refine and verify.
Before this fix:
/dev/mapper/stripe_dev is a 4-way stripe using a 32k chunksize, so
bios are split on 32k boundaries.
# fio --name=16M --filename=/dev/mapper/stripe_dev --rw=write --bs=64k --size=16M \
--iodepth=1 --ioengine=libaio --direct=1 --refill_buffers
with debugging added:
[103898.310264] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=0 len=128
[103898.318704] device-mapper: core: __split_and_process_bio: recursing for following split bio:
[103898.329136] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=64 len=64
...
16M written yet 136M (278528 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
278528
After this fix:
16M written and 16M (32768 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
32768
Fixes: 18a25da843 ("dm: ensure bio submission follows a depth-first tree walk")
Cc: stable@vger.kernel.org # 4.16+
Reported-by: Bryan Gurney <bgurney@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM's clone_bio() now benefits from using bio_trim() by fixing the fact
that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
which triggers blk_recount_segments() via bio_phys_segments().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Fix DM to allow reads that exceed readahead limits by setting io_pages
in the backing_dev_info.
- A couple code cleanups in request-based DM.
- Fix various DM targets to check for device sector overflow if
CONFIG_LBDAF is not set.
- Use u64 instead of sector_t to store iv_offset in DM crypt; sector_t
isn't large enough on 32bit when CONFIG_LBDAF is not set.
- Performance fixes to DM's kcopyd and the snapshot target focused on
limiting memory use and workqueue stalls.
- Fix typos in the integrity and writecache targets.
- Log which algorithm is used for dm-crypt's encryption and
dm-integrity's hashing.
- Fix false -EBUSY errors in DM raid target's handling of check/repair
messages.
- Fix DM flakey target's corrupt_bio_byte feature to reliably corrupt
the Nth byte in a bio's payload.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcHu6MAAoJEMUj8QotnQNar9gIAKyJ5hH0ik3mlLhAyPcMkRU+
MPvjTAC8V5V33VY8YqKD/TcDHY8yaGTPKSK0SAnB8Jv2tLz8mp0H18syJbMvNcFc
MS/xWYLAZiXf5xJ4eJpo8ayDvU6DAkKtSbG7VHJ8gnx/WV8bW1b90OCIq8GN+jHo
DPp6RDzy3LvonoZ9OPognQKUDXK1crdPDiv1Wzw9Zjd4JlruIaGgJOc1RLB7YdVK
u5c7UD7cT+MCROEzJrctAZa5oRVhuemd83HPvwE2akRFvCSNtc7aIVtNfJ79nqL7
19oUDfsuzf2zkiJLzO0oU4OrJ+lUGDJf/sPXmU1qlPyKdUqYKFxT+KHvBnhAQXI=
=pCs8
-----END PGP SIGNATURE-----
Merge tag 'for-4.21/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Eliminate a couple indirect calls from bio-based DM core.
- Fix DM to allow reads that exceed readahead limits by setting
io_pages in the backing_dev_info.
- A couple code cleanups in request-based DM.
- Fix various DM targets to check for device sector overflow if
CONFIG_LBDAF is not set.
- Use u64 instead of sector_t to store iv_offset in DM crypt; sector_t
isn't large enough on 32bit when CONFIG_LBDAF is not set.
- Performance fixes to DM's kcopyd and the snapshot target focused on
limiting memory use and workqueue stalls.
- Fix typos in the integrity and writecache targets.
- Log which algorithm is used for dm-crypt's encryption and
dm-integrity's hashing.
- Fix false -EBUSY errors in DM raid target's handling of check/repair
messages.
- Fix DM flakey target's corrupt_bio_byte feature to reliably corrupt
the Nth byte in a bio's payload.
* tag 'for-4.21/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: do not allow readahead to limit IO size
dm raid: fix false -EBUSY when handling check/repair message
dm rq: cleanup leftover code from recently removed q->mq_ops branching
dm verity: log the hash algorithm implementation
dm crypt: log the encryption algorithm implementation
dm integrity: fix spelling mistake in workqueue name
dm flakey: Properly corrupt multi-page bios.
dm: Check for device sector overflow if CONFIG_LBDAF is not set
dm crypt: use u64 instead of sector_t to store iv_offset
dm kcopyd: Fix bug causing workqueue stalls
dm snapshot: Fix excessive memory usage and workqueue stalls
dm bufio: update comment in dm-bufio.c
dm writecache: fix typo in error msg for creating writecache_flush_thread
dm: remove indirect calls from __send_changing_extent_only()
dm mpath: only flush workqueue when needed
dm rq: remove unused arguments from rq_completed()
dm: avoid indirect call in __dm_make_request
-----BEGIN PGP SIGNATURE-----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=TRdW
-----END PGP SIGNATURE-----
Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"This is the main pull request for block/storage for 4.21.
Larger than usual, it was a busy round with lots of goodies queued up.
Most notable is the removal of the old IO stack, which has been a long
time coming. No new features for a while, everything coming in this
week has all been fixes for things that were previously merged.
This contains:
- Use atomic counters instead of semaphores for mtip32xx (Arnd)
- Cleanup of the mtip32xx request setup (Christoph)
- Fix for circular locking dependency in loop (Jan, Tetsuo)
- bcache (Coly, Guoju, Shenghui)
* Optimizations for writeback caching
* Various fixes and improvements
- nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
* host and target support for NVMe over TCP
* Error log page support
* Support for separate read/write/poll queues
* Much improved polling
* discard OOM fallback
* Tracepoint improvements
- lightnvm (Hans, Hua, Igor, Matias, Javier)
* Igor added packed metadata to pblk. Now drives without metadata
per LBA can be used as well.
* Fix from Geert on uninitialized value on chunk metadata reads.
* Fixes from Hans and Javier to pblk recovery and write path.
* Fix from Hua Su to fix a race condition in the pblk recovery
code.
* Scan optimization added to pblk recovery from Zhoujie.
* Small geometry cleanup from me.
- Conversion of the last few drivers that used the legacy path to
blk-mq (me)
- Removal of legacy IO path in SCSI (me, Christoph)
- Removal of legacy IO stack and schedulers (me)
- Support for much better polling, now without interrupts at all.
blk-mq adds support for multiple queue maps, which enables us to
have a map per type. This in turn enables nvme to have separate
completion queues for polling, which can then be interrupt-less.
Also means we're ready for async polled IO, which is hopefully
coming in the next release.
- Killing of (now) unused block exports (Christoph)
- Unification of the blk-rq-qos and blk-wbt wait handling (Josef)
- Support for zoned testing with null_blk (Masato)
- sx8 conversion to per-host tag sets (Christoph)
- IO priority improvements (Damien)
- mq-deadline zoned fix (Damien)
- Ref count blkcg series (Dennis)
- Lots of blk-mq improvements and speedups (me)
- sbitmap scalability improvements (me)
- Make core inflight IO accounting per-cpu (Mikulas)
- Export timeout setting in sysfs (Weiping)
- Cleanup the direct issue path (Jianchao)
- Export blk-wbt internals in block debugfs for easier debugging
(Ming)
- Lots of other fixes and improvements"
* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
kyber: use sbitmap add_wait_queue/list_del wait helpers
sbitmap: add helpers for add/del wait queue handling
block: save irq state in blkg_lookup_create()
dm: don't reuse bio for flushes
nvme-pci: trace SQ status on completions
nvme-rdma: implement polling queue map
nvme-fabrics: allow user to pass in nr_poll_queues
nvme-fabrics: allow nvmf_connect_io_queue to poll
nvme-core: optionally poll sync commands
block: make request_to_qc_t public
nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
nvme-tcp: fix endianess annotations
nvmet-tcp: fix endianess annotations
nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
nvme-pci: only set nr_maps to 2 if poll queues are supported
nvmet: use a macro for default error location
nvmet: fix comparison of a u16 with -1
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
...
DM currently has a statically allocated bio that it uses to issue empty
flushes. It doesn't submit this bio, it just uses it for maintaining
state while setting up clones. Multiple users can access this bio at the
same time. This wasn't previously an issue, even if it was a bit iffy,
but with the blkg associations it can become one.
We setup the blkg association, then clone bio's and submit, then remove
the blkg assocation again. But since we can have multiple tasks doing
this at the same time, against multiple blkg's, then we can either lose
references to a blkg, or put it twice. The latter causes complaints on
the percpu ref being <= 0 when released, and can cause use-after-free as
well. Ming reports that xfstest generic/475 triggers this:
------------[ cut here ]------------
percpu ref (blkg_release) <= 0 (0) after switching to atomic
WARNING: CPU: 13 PID: 0 at lib/percpu-refcount.c:155 percpu_ref_switch_to_atomic_rcu+0x2c9/0x4a0
Switch to just using an on-stack bio for this, and get rid of the
embedded bio.
Fixes: 5cdf2e3fea ("blkcg: associate blkg when associating a device")
Reported-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Indirect calls are inefficient because of retpolines that are used for
spectre workaround. This patch replaces an indirect call with a condition
(that can be predicted by the branch predictor).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There's a single user of this function, dm, and dm just wants
to check if IO is inflight, not that it's just allocated.
This fixes a hang with srp/002 in blktests with dm, where it tries
to suspend but waits for inflight IO to finish first. As it checks
for just allocated requests, this fails.
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The md->wait waitqueue is used by both bio-based and request-based DM.
Commit dbd3bbd291 ("dm rq: leverage blk_mq_queue_busy() to check for
outstanding IO") lost sight of the requirement that
dm_wait_for_completion() must work with all types of DM devices.
Fix md_in_flight() to call the blk-mq or bio-based method accordingly.
Fixes: dbd3bbd291 ("dm rq: leverage blk_mq_queue_busy() to check for outstanding IO")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After switching to percpu inflight counters, the inflight check
is totally buggy. It's perfectly valid for some counters to be
non-zero while having a total inflight IO count of 0, that's how
these kinds of counters work (inc on one CPU, dec on another).
Fix the md_in_flight() check to sum all counters before returning
a false positive, potentially.
While at it, remove the inflight read for IO completion. We don't
need it, just wake anyone that's waiting for the IO count to drop
to zero. The caller needs to re-check that value anyway when woken,
which it does.
Fixes: 6f75723190 ("dm: remove the pending IO accounting")
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_start_io_acct and generic_end_io_acct already update the variable
in_flight using atomic operations, so we don't have to overwrite them
again.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The next patch changes the macro bio_set_dev() to associate a bio with a
blkg based on the device set. However, dm creates a static bio to be
used as the basis for cloning empty flush bios on creation. The
bio_set_dev() call in alloc_dev() will cause problems with the next
patch adding association to bio_set_dev() because the call is before the
bdev is associated with a gendisk (bd_disk is %NULL). To get around
this, set the device on the static bio every time and use that to clone
to the other bios.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Otherwise the incoming bios, of various types, won't be shaped based on
the DM device's advertised limits.
Depends-on: af67c31fba ("blk: remove bio_set arg from blk_queue_split()")
Fixes: 744889b7cb ("block: don't deal with discard limit in blkdev_issue_discard()")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
With the legacy request path gone there is no real need to override the
queue_lock.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(.request_fn) from request-based DM. Jens has already started
preparing for complete removal of the legacy IO path in 4.21 but this
earlier removal of support from DM has been coordinated with Jens (as
evidenced by the commit being attributed to him). Making
request-based DM exclussively blk-mq only cleans up that portion of DM
core quite nicely.
- Convert the thinp and zoned targets over to using refcount_t where
applicable.
- A couple fixes to the DM zoned target for refcounting and other races
buried in the implementation of metadata block creation and use.
- Small cleanups to remove redundant unlikely() around a couple
WARN_ON_ONCE().
- Simplify how dm-ioctl copies from userspace, eliminating some
potential for a malicious user trying to change the executed ioctl
after its processing has begun.
- Tweaked DM crypt target to use the DM device name when naming the
various workqueues created for a particular DM crypt device (makes the
N workqueues for a DM crypt device more easily understood and enhances
user's accounting capabilities at a glance via "ps")
- Small fixup to remove dead branch in DM writecache's memory_entry().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0zCmAAoJEMUj8QotnQNaUKwIAKFC3cuTtQyh3LomSbT4uAr5
6apBSVcxVhqU+isriW3HmBPkO4HGyqMWjX5oQGHrOj0YK0i1H65Nq3qH9ATaiSHn
awdo8A4YmClF5Mojc51UebXIH0IfnGSOKH/FHNhQzT3jAdn+vYinMSZ28JwFPgKW
DsVOSM1dlJZBWRXhQNpyCjVl9Xb3rRUOnkfG0endyMfOsnoxKurhwSkXoStzCdQn
O5ubt1XT3wMKoI1k9QWjfrBU1NtZZYD+kQ6EfkYXfL9RNhhZjwzO/eNtqT3jnKsq
qbcd8/0JIUttPf7+F0URG9mbMbebfJGqNAaJWcnlRbCHmgUBBGVWsnl8MTWOLkw=
=MdDN
-----END PGP SIGNATURE-----
Merge tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The biggest change this cycle is to remove support for the legacy IO
path (.request_fn) from request-based DM.
Jens has already started preparing for complete removal of the legacy
IO path in 4.21 but this earlier removal of support from DM has been
coordinated with Jens (as evidenced by the commit being attributed to
him).
Making request-based DM exclussively blk-mq only cleans up that
portion of DM core quite nicely.
- Convert the thinp and zoned targets over to using refcount_t where
applicable.
- A couple fixes to the DM zoned target for refcounting and other races
buried in the implementation of metadata block creation and use.
- Small cleanups to remove redundant unlikely() around a couple
WARN_ON_ONCE().
- Simplify how dm-ioctl copies from userspace, eliminating some
potential for a malicious user trying to change the executed ioctl
after its processing has begun.
- Tweaked DM crypt target to use the DM device name when naming the
various workqueues created for a particular DM crypt device (makes
the N workqueues for a DM crypt device more easily understood and
enhances user's accounting capabilities at a glance via "ps")
- Small fixup to remove dead branch in DM writecache's memory_entry().
* tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: remove disabled code in memory_entry()
dm zoned: fix various dmz_get_mblock() issues
dm zoned: fix metadata block ref counting
dm raid: avoid bitmap with raid4/5/6 journal device
dm crypt: make workqueue names device-specific
dm: add dm_table_device_name()
dm ioctl: harden copy_params()'s copy_from_user() from malicious users
dm: remove unnecessary unlikely() around WARN_ON_ONCE()
dm zoned: target: use refcount_t for dm zoned reference counters
dm thin: use refcount_t for thin_c reference counting
dm table: require that request-based DM be layered on blk-mq devices
dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASED
dm: remove legacy request-based IO path
