Convert the OMAP2+ TUSB code to use the gpmc_cs_program_settings()
function for configuring the various GPMC options instead of directly
programming the CONFIG1 register.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Convert the OMAP2+ SMC91x code to use the gpmc_cs_program_settings()
function for configuring the various GPMC options instead of directly
programming the CONFIG1 register.
Move configuration of the GPMC settings outside retime function and
this does not need to be done if the timings are changed dynamically
at runtime.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Convert the OMAP2+ NAND code to use the gpmc_cs_program_settings()
function for configuring the various GPMC options instead of directly
programming the CONFIG1 register.
This moves the configuration of some GPMC options outside the
nand_gpmc_retime() because these options should only need to be set once
regardless of whether the gpmc timing is changing dynamically at runtime.
The programming of where the wait-pin is also moved slightly, but this
will not have any impact to existing devices as no boards are currently
setting the dev_ready variable.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Convert the OMAP2+ ONENAND code to use the gpmc_cs_program_settings()
function for configuring the various GPMC options instead of directly
programming the CONFIG1 register.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The GPMC has various different configuration options such as bus-width,
synchronous or asychronous mode selection, burst mode options etc.
Currently, there is no common function for configuring these options and
various devices set these options by either programming the GPMC CONFIG1
register directly or by calling gpmc_cs_configure() to set some of the
options.
Add a new function for configuring all of the GPMC options. Having a common
function for configuring this options will simplify code and ease the
migration to device-tree.
Also add a new capability flag to detect devices that support the
address-address-data multiplexing mode.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The GPMC has various different configuration options such as bus-width,
synchronous or asychronous mode selection, burst mode options etc.
Currently, there is no central structure for storing all these options
when configuring the GPMC for a given device. Some of the options are
stored in the GPMC timing structure and some are directly programmed
into the GPMC configuration register. Add a new structure to store
these options and convert code to use this structure. Adding this
structure will allow us to create a common function for configuring
these options.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The GPMC has wait-pin signals that can be assigned to a chip-select
to monitor the ready signal of an external device. Add a variable to
indicate the total number of wait-pins for a given device. This will
allow us to detect if the wait-pin being selected is valid or not.
When booting with device-tree read the number of wait-pins from the
device-tree blob. When device-tree is not used set the number of
wait-pins to 4 which is valid for OMAP2-5 devices. Newer devices
that have less wait-pins (such as AM335x) only support booting with
device-tree and so hard-coding the wait-pin number when not using
device-tree is fine.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The OMAP2+ code that configures the GPMC for ONENAND devices is copying
structures between functions unnecessarily. Avoid this by passing
pointers instead and simplify the code.
A pointer to structure "omap_onenand_platform_data" is passed to the
function omap2_onenand_calc_sync_timings(), but only the flags member
of the structure is used. Simplify the code by only passing the flags
member and not the entire structure.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
This check is done before the call to gpmc_cs_reserved() and
gpmc_cs_set_reserved() and it's redundant to do it again in each
function. This simplifies the code a bit.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Since the condition is not an error but a warning, replace
printk KERN_ERR with dev_warn.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Do this becasue dev_err() is preferred over pr_err() and because
it will match gpmc-nand, thus the code shows looks more consistent.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
If CS request fails the current error message is rather unhelpful.
Fix it by printing the failing chip select and the error code.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
If CS request fails the current error message is rather unhelpful.
Fix it by printing the failing chip select and the error code.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Currently gpmc_cs_reserved() return value is somewhat inconsistent,
returning a negative value on an error condition, a positive value
if the chip select is reserved and zero if it's available.
Fix this by returning a boolean value as the function name suggests:
* true if the chip select is reserved,
* false if it's available
Suggested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
This function is not used anywhere, so it's safe to remove it.
This means less code to maintain.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
This patch marks a bunch of functions that are local
to gpmc.c file only as static.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
When setting the GPMC device type, make sure any previous
bits are cleared down, before applying the new setting.
For OMAP4+ devices MUXADDDATA is a 2-bit field (bits 9:8)
where as for OMAP2/3 devices it was only a one bit field
(bit 9). For OMAP2/3 devices bit 8 is reserved and the
OMAP documentation says to write a 0 to this bit. So
clearing bit 8 on OMAP2/3 devices should not be a problem.
Hence update the code to handle both bits 8 and 9 for all
devices.
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
[jon-hunter@ti.com: updated changelog]
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Commit 6bb27d7 (ARM: delete struct sys_timer) changed the function
created by the macro OMAP_SYS_32K_TIMER_INIT from static void to void.
For OMAP4+ devices this created the following sparse warning ...
arch/arm/mach-omap2/timer.c:585:1: warning: symbol
'omap4_sync32k_timer_init' was not declared. Should it be static?
The function omap4_sync32k_timer_init() is not referenced outside of the
file timer.c and so make this function static.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Currently, the timer ID is being passed to the function
omap_dm_timer_init_one(). Instead of passing the ID separately, store it
in the omap_dm_timer structure, that is also passed, and access the ID
from this structure.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
When booting with device-tree for OMAP3 and AM335x devices and a gptimer
is used as the clocksource (which is always the case for AM335x), a
gptimer located in a power domain that is not always-on is selected.
Ideally we should use a gptimer for clocksource that is located in a
power domain that is always on (such as the wake-up domain) so that time
can be maintained during a kernel suspend without keeping on additional
power domains unnecessarily.
In order to fix this so that we can select a gptimer located in a power
domain that is always-on, the following changes were made ...
1. Currently, only when selecting a gptimer to use for a clockevent
timer, do we pass a timer property that can be used to select a
specific gptimer. Change this so that we can pass a property when
selecting a gptimer to use for a clocksource timer too.
2. Currently, when selecting either a gptimer to use for a clockevent
timer or a clocksource timer and no timer property is passed, then
the first available timer is selected regardless of the properties
it has. Change this so that if no properties are passed, then a timer
that does not have additional features (such as always-on, dsp-irq,
pwm, and secure) is selected.
For OMAP3 and AM335x devices that use a gptimer for clocksource, change
the selection of the gptimer so that by default the gptimer located in
the always-on power domain is used for clocksource instead of
clockevents.
Please note that using a gptimer for both clocksource and clockevents
can have a system power impact during idle. The reason being is that
OMAP and AMxxx devices typically only have one gptimer in a power domain
that is always-on. Therefore when the kernel is idle both the clocksource
and clockevent timers will be active and this will keep additional power
domains on. During kernel suspend, only the clocksource timer is active
and therefore, it is better to use a gptimer in a power domain that is
always-on for clocksource.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
There is a lot of redundancy in the definitions for the various system
timers for OMAP2+ devices. For example, the omap3_am33xx_gptimer_timer_init()
function is the same as the omap3_gp_gptimer_timer_init() function and the
function omap4_sync32k_timer_init() can be re-used for OMAP5 devices.
Therefore, consolidate the definitions to simplify the code.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
In commit c59b537 (ARM: OMAP2+: Simplify dmtimer clock aliases), new
clock aliases for dmtimers were added to simplify the code. These clock
aliases can also be used when configuring the system timers and allow us
to remove the current definitions, simplifying the code.
Please note that for OMAP4/5 devices (unlike OMAP2/3 devices), there is
no clock alias for "timer_sys_ck" with NULL as the device name. Therefore
we still need to use the alias "sys_clkin_ck" for these devices.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Currently, when configuring the clock-events and clock-source timers
for OMAP2+ devices, we check whether the timer ID is 12 before
attempting to set the parent clock for the timer.
This test was added for OMAP3 general purpose devices (no security
features enabled) that a 12th timer available but unlike the other
timers only has a single functional clock source. Calling
clk_set_parent() for this 12th timer would always return an error
because there is only one choice for a parent clock. Therefore,
this hard-coded timer ID test was added.
To avoid this timer ID test, simply check to see if the timer's current
parent clock is the desired parent clock and only call clk_set_parent()
if this is not the case.
Also if clk_get() fails, then use PTR_ERR() to return the error code.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Currently on boot, when displaying the name of the gptimer used for
clockevents and clocksource timers, the timer ID is shown. However,
when booting with device-tree, the timer ID is not used to select a
gptimer but a timer property. Hence, it is possible that the timer
selected when booting with device-tree does not match the ID shown.
Therefore, instead display the HWMOD name of the gptimer and use
the HWMOD name as the name of clockevent and clocksource timer (if a
gptimer is used).
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Commit 90173882ed ("omap: add dsp platform
device") used CONFIG_BRIDGE_DVFS were it obviously meant
CONFIG_TIDSPBRIDGE_DVFS. Fix that.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
omap3_noncore_dpll_set_rate() attempts an enable of bypass clk as well
as ref clk for every .set_rate attempt on a noncore DPLL, regardless of
whether the .set_rate results in the DPLL being locked or put in bypass.
Early at boot, while some of these DPLLs are programmed and locked
(using .set_rate for the DPLL), this causes an ordering issue.
For instance, on OMAP5, the USB DPLL derives its bypass clk from ABE DPLL.
If a .set_rate of USB DPLL which programmes the M,N and locks it is called
before the one for ABE, the enable of USB bypass clk (derived from ABE DPLL)
then attempts to lock the ABE DPLL and fails as the M,N values for ABE
are yet to be programmed.
To get rid of this ordering needs, enable bypass clk for a DPLL as part
of its .set_rate only when its being put in bypass, and only enable the
ref clk when its locked.
Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
_pwrdm_save_clkdm_state_and_activate() tried to test one of its
unsigned arguments to determine whether it was less than zero. Fix by
moving the error test to the caller.
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
_HWMOD_WAKEUP_ENABLED is currently unused across the hwmod
framework. Just get rid of it, so we have one less flag to
worry about.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
WDT1 module can take one of the below clocks as input functional
clock -
- On-Chip 32K RC Osc [default/reset]
- 32K from PRCM
The On-Chip 32K RC Osc clock is not an accurate clock-source as per
the design/spec, so as a result, for example, timer which supposed
to get expired @60Sec, but will expire somewhere ~@40Sec, which is
not expected by any use-case.
The solution here is to switch the input clock-source to PRCM
generated 32K clock-source during boot-time itself.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit Cousson <benoit.cousson@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
This patch adds sysc definitions to the wdt1 hwmod entry, which in-turn
makes sure that sysc idle bit-fields are configured to valid state on
enable/disable callbacks.
With the recent submitted patch from Santosh Shilimkar,
"ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc"
(commit: 4a98c2d89), it is required to add sysconf
information to each valid hwmod entry, else device will not be
come out from idle state properly and leads to below kernel
crash -
[2.190237] Unhandled fault: external abort on non-linefetch (0x1028) at
0xf9e35034
[2.198325] Internal error: : 1028 [#1] SMP ARM
[2.203101] Modules linked in:
[2.206334] CPU: 0 Not tainted (3.9.0-rc3-00059-gd114294#1)
[2.212679] PC is at omap_wdt_disable.clone.5+0xc/0x60
[2.218090] LR is at omap_wdt_probe+0x184/0x1fc
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit Cousson <benoit.cousson@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
The initialization is done from the cpuidle framework.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the CPUIDLE_FLAG_TIMER_STOP and let the cpuidle framework
to handle the CLOCK_EVT_NOTIFY_BROADCAST_ENTER/EXIT when entering
this state.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update the AES0 HIB2 module's hwmod data for the am33xx SoC.
Also, remove it from the '#if 0' block that its currently
inside so the data is actually available for use.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add clock data for for the SHA0 crypto module
on the am33xx SoC.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The omap_init_aes() routine in devices.c only needs to be
called when there is no device tree present.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Remove the error message that prints when there is no AES IP
present to make it consistent with all the other IPs.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Convert the device data for the OMAP3 AES crypto IP
from explicit platform_data to hwmod.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Convert the device data for the OMAP2 AES crypto IP from
explicit platform_data to hwmod.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Update the SHA0 HIB2 module's hwmod data for the am33xx SoC.
Also, remove it from the '#if 0' block that its currently
inside so the data is actually available for use.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add clock data for for the SHA0 crypto module
on the am33xx SoC.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The omap_init_sham() routine in devices.c only needs to be
called when there is no device tree present.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Remove the error message that prints when there is no SHA IP
present to make it consistent with all the other IPs.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Convert the device data for the OMAP3 SHAM2 (SHA1/MD5) crypto IP
from explicit platform_data to hwmod.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: updated to use per-SoC registration lists for GP-only hwmods;
fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The current OMAP2 SHAM support doesn't enable DMA
so add that support so it can use DMA just like OMAP3.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Convert the device data for the OMAP2 SHAM crypto IP from
explicit platform_data to hwmod.
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
OMAP4460 ROM code bug needs the GIC distributor and local timer
bases to be available for the bug work around. In current code, dt
case these bases are not initialized leading to failure of the
errata work-around.
Fix it by extracting the bases from dt blob and populating them.
Reported-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
UART driver slave idle issue has been taken care by driver using hwmod
framework.
So we can now ger rid off the L4 per clockdomain static dependency with
MPU which was used to wrok around UART wakeup and console sluggishnesh issue
on OMAP4 SOCs.
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
With commit bfd6d021 {ARM: OMAP3+: Implement timer workaround for errata
i103 and i767}, the sync and gptimer synchronization errata got fixed.
Hence the l4_wakeup static dependency with MPU can can be removed
now. Static dependency was one of the proposed workaround but from
power savings perspective, it isn't an ideal workaround.
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Move the secondary CPU wakeup prepare code under smp_prepare_cpus() where it
belongs. It was remainder of the pen release code which was borrowed from
ARM code initially.
While at it drop the un-necessary sev() and barrier which was under
prepare code.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The smp_wmb() here is out of placed and redundant. So remove it. It is
a left over of the pen_release cleanup mostly.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This was borrowed from ARM versatile code with pen_release mechanism but since
OMAP uses hardware register based synchronisation, pen_release stuff was
dropped. Unfortunately the cacheflush wasn't dropped along with it.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This was added with intial port where OMAP PM support wasn't existing
and only simple WFI based hooks were used.
This should have been cleaned up while adding the PM support but some
how fall through cracks.
So remove the cache flush code which is no longer needed now.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
On OMAP platform, FIQ is reserved for secure environment only. If at all
the FIQ needs to be disabled, it involves going through security
API call. Hence the local_fiq_[enable/disable]() in the OMAP code is bogus.
On GP devices too, the fiq is disabled for non-secure software.
So just get rid of it.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Choose the common scratch pad offsets, so that same offsets can work for
OMAP4 and OMAP5 devices. It simplifies code and also allows the re-use as
is on OMAP5 devices. Note that these offsets are used by low power
code for various power state management. They are not hardware register
offsets.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
clock should be registered on a given SoC with per-SoC lists.
Basic build, boot, and power management test results are available at:
http://www.pwsan.com/omap/testlogs/jk_clock_flags_cleanup_3.10/20130318100504/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRSJCeAAoJEMePsQ0LvSpLds0P/2JRnSX70pzRCWfTVIiC3X1c
MpAluIVDOEuX5pSGFcFUmH5yBP3R7Bc1lfmFk08cAlI6kr75E6XDGiwahlx0M+4F
9EY6BQgnXc4rSSxXT7S5PoWlnhNAceP88OwxBAIkSvrbwEtDUKz03XLHY/SgLilA
5ac8Rfqc/J4xTWpHHV4rHY8tGwZt5O5TQsGB0pYXb6ej0tWnlYWUh/7VHYqABpWg
XJli2B9ejxfIzEYDdraSTL3JQZphAeDili270d3l2H0g/rET5VVPEmx8Ei7pH5HO
IMjmQc2X+qPwL/tPNpBKCjt2OUboyHarYzILtf/DdrUAaffpv1O3s1zzxyac8b5B
16tM92MgNLyUCWbZLJzefQ+cVqG0YZwBq3PBLPUSbkttTYgIs7eXPJuP55GWcJQW
2KqK2tyrAG8VV5BPu2Oh5JdT+e/Bd28DYzdjI/+qCYvVKmQJV0NCZW37XA5zuAYr
XefIt9UbabtHmy9RJn1OV0QMsEz1sUQ7B3TyS68F3kr62SMImJAwc2RcbX4R9MAx
PsDW0dqrMa93RO98G/u3WKgjWRqNNnxAOGKqWUJxVLXGYjxf/7Jr1wAZzwYtZsIF
IgiOGU3bLBLOSlQtyRh91Kjz/PMxzMlhRNBXxSr5Dq9BfYhS8lC0LS7OnOKPr6eW
YyJUBj6BpT9WHSIN5g6L
=PjJe
-----END PGP SIGNATURE-----
Merge tag 'omap-cleanup-a-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.10/cleanup
In the OMAP2+ clock data, replace the flags that determine whether a
clock should be registered on a given SoC with per-SoC lists.
Basic build, boot, and power management test results are available at:
http://www.pwsan.com/omap/testlogs/jk_clock_flags_cleanup_3.10/20130318100504/
clk inits on OMAP happen quite early, even before slab is available.
The dependency comes from the fact that the timer init code starts to
use clocks and hwmod and we need clocks to be initialized by then.
There are various problems doing clk inits this early, one is,
not being able to do dynamic clk registrations and hence the
dependency on clk-private.h. The other is, inability to debug
early kernel crashes without enabling DEBUG_LL and earlyprintk.
Doing early clk init also exposed another instance of a kernel
panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled.
[ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable]
[ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6)
[ 0.000000] PC is at __kmalloc+0x1d4/0x248
[ 0.000000] LR is at __clk_init+0x2e0/0x364
[ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3
[ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54
[ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4
[ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000
[ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c
[ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017
[ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240)
[ 0.000000] Stack: (0xc076ff28 to 0xc0770000)
[ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88
[ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4
[ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac
[ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000
[ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724
[ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974
[ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000
[ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364)
[ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140)
[ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284)
[ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334)
[ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074)
[ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2)
[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
It was a know issue, that slab allocations would fail when common
clock core tries to cache parent pointers for mux clocks on OMAP,
and hence a patch 'clk: Allow late cache allocation for clk->parents,
commit 7975059d' was added to work this problem around.
A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely
overlooked causing this regression.
More details on the issue reported can be found here,
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html
With all these issues around clk inits happening way too early, it
makes sense to at least move them to a point where dynamic memory
allocations are possible. So move them to a point just before the
timer code starts using clocks and hwmod.
This should at least pave way for clk inits on OMAP moving to dynamic
clock registrations instead of using the static macros defined in
clk-private.h.
The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled
was reported by Piotr Haber and Tony Lindgren and this patch
fixes the reported issue as well.
Reported-by: Piotr Haber <phaber@broadcom.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Paul Walmsley <paul@pwsan.com>
Cc: stable@vger.kernel.org # v3.8
Signed-off-by: Tony Lindgren <tony@atomide.com>
All the calls to gic_secondary_init() pass 0 as the first argument.
Since this function is called on each CPU when starting, it can be done
in a platform-independent way via a CPU notifier registered by the GIC
code.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Tested-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Barry Song <baohua.song@csr.com>
Many of these channel definitions have became unused or were never used
so remove unused definitions from arch/arm/mach-omap2/dma.h using a script
below. See also notes in commit d5e7c86
("ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2")
for removing remaining ones.
egrep '#define OMAP.*DMA' arch/arm/mach-omap2/dma.h \
|cut -f 1 |cut -d ' ' -f 2 | while read -r i; do \
if [ `git grep -c $i | wc -l` -eq 1 ]; then \
echo "removing" $i; \
sed -i "/${i}/d" arch/arm/mach-omap2/dma.h; \
fi; \
done
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There's a (rather subtle) typo in "CONFIG_SMC91x_MODULE". Fix it once
and for all by using IS_ENABLED(), which is designed to avoid issues
like this.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
management regressions. There's also a fix for the OMAP1 OHCI controller.
Basic build, boot, and PM test logs are at:
http://www.pwsan.com/omap/testlogs/fixes_a_3.9-rc/20130314101856/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRQgOEAAoJEMePsQ0LvSpL0uAP/1YTcjDPTg6Gvfy4OHSQysu9
a9mIvADNzgho4GVm87ILPDHLMl8S5m60NdUhuy05VzWE2jrPZ+OUyvTAiMhzVSlO
9xoh4icRej8m14KUOA1X3E5uye/YOPtddP0HbiiwrewYKzNxIXpEXqxrCkRpO3BB
V8Ypp3Ck7wCn8PhSkkRe829uLv1bVGzXo7bNH31WhegI0Ghy/EBmjvtzDBDJpNjD
nDZQ1+CZ5zpbRfnTUrhGmQ5BmUd071RkUFyXuSKCWxMKqcSnfkegzeMatLSSpVEm
6ZXfgOp6NpOyxFtKxYPYzy1jK3SiyskOtBN9CH8CWSPFhV7UlmXi5t6GlQUHOHQM
24siQug1nx13X9Xs1VqxaX9WL6csKuXLlp9Q+DYjuKDMpIL7S8rkZuTvQxepeLeI
a98aRdmJ7fdJLxHq6j1sHIWvIw6SraRKTOjLzIz8dzZZIcZdw1LR3s8zfsocnZel
0H3CFkoluCJaWtflgGSgAKcp0nF/envTKxieWx6AL7cafe5VtU4wqccNXU2wC0+C
ogPDXDdLHtTWsb45+L8pUNkyqpgJr/A/HUNN4ypCPPWjRlsn2XhF4uwTQh0Auqll
9yTJFti+RRvOHq+eKXwfkTqwzsubGuwqm279vsLVhF9PhcMZBjyVQpUcHfTdhshi
VTCTI2w6KDr8UcRKsVPs
=pU5V
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-a-for-3.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.9-rc3/fixes
Miscellaneous OMAP fixes for v3.9-rc. These primarily deal with OMAP2+ power
management regressions. There's also a fix for the OMAP1 OHCI controller.
Basic build, boot, and PM test logs are at:
http://www.pwsan.com/omap/testlogs/fixes_a_3.9-rc/20130314101856/
OMAP5 does not have freqsel either, so checks needs to be extended.
Infact only OMAP343X devices has the freqsel support, so fix the check
accordingly so that future patching can be avoided.
Reported-by: Archit Taneja <archit@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Errata i688 is also applicable for OMAP5 based devices. Update the
code so that it can be enabled on OMAP5 devices.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Make use of 'prm_base' so that prm read_inst/write_inst can work on
OMAP5 devices.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The patch removes all the CK_* which were used to identify the family of
processors for which the individual clocks belonged to. Instead now separate
lists are created based on the family of processors.
Boot Tested on: OMAP4430, OMAP4460, Beagle-board, AM33X boards, OMAP2 boards.
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Jon Hunter <jon-hunter@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: changed omap_clock_register_links() to omap_clocks_register();
updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Consistently check errors using the usual method used in the kernel
for much of its history. For instance:
int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
{
int div;
div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
{
...
return gpmc_cs_set_timings(cs, t);
.....
ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
if (IS_ERR_VALUE(ret))
return ret;
So, gpmc_cs_set_timings() thinks any negative return value is an error,
but where we check that in higher levels, only a limited range are
errors...
There is only _one_ use of IS_ERR_VALUE() in arch/arm which is really
appropriate, and that is in arch/arm/include/asm/syscall.h:
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
unsigned long error = regs->ARM_r0;
return IS_ERR_VALUE(error) ? error : 0;
}
because this function really does have to differentiate between error
return values and addresses which look like negative numbers (eg, from
mmap()).
So, here's a patch to remove them from OMAP, except for the above.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 17b7e7d335 ("ARM: OMAP4:
clock/hwmod data: start to remove some IP block control "clocks"")
introduced a regression preventing the L3INIT clockdomain of OMAP4
systems from entering idle. This in turn prevented these systems from
entering full chip clock-stop.
The regression was caused by the incorrect removal of a so-called
"optional functional clock" from the OMAP4 clock data. This wasn't
caught for two reasons. First, I missed the retention entry failure
in the branch test logs:
http://www.pwsan.com/omap/testlogs/cleanup_a_3.9/20130126014242/pm/4460pandaes/4460pandaes_log.txt
Second, the integration data for the OCP2SCP PHY IP block, added by
commit 0c6688753f ("ARM: OMAP4: hwmod
data: add remaining USB-related IP blocks"), should have associated this
clock with the IP block, but did not.
Fix by adding back the so-called "optional" functional clock to the
clock data, and by linking that clock to the OCP2SCP PHY IP block
integration hwmod data.
The problem patch was discovered by J, Keerthy <j-keerthy@ti.com>.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
For some unknown reason, allowing hwmod to control MIDLEMODE causes
core_pwrdm to not hit idle states for musb in DM3730 at least.
I've verified that setting any MIDLEMODE value other than "force
standby" before enabling the device causes subsequent suspend
attempts to fail with core_pwrdm not entering idle states, even
if the driver is unloaded and "force standby" is restored before
suspend attempt. To recover from this, soft reset can be used, but
that's not suitable solution for suspend.
Keeping the register set at force standby (reset value) makes it work
and device still functions properly, as musb has driver-controlled
OTG_FORCESTDBY register that controls MSTANDBY signal.
Note that TI PSP kernels also have similar workarounds.
This patch also fixes HWMOD_SWSUP_MSTANDBY documentation to match the
actual flag name.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Some versions of the u-boot bootloader do not lock the USB DPLL and
when the USB DPLL is not locked, then it is observed that the L3INIT
power domain does not transition to retention state during kernel
suspend on OMAP4 devices. Fix this by locking the USB DPLL at 960 MHz
on kernel boot.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Now that we have OF based init with CLKSRC_OF, convert smp_twd init
function to use it and covert all callers of
twd_local_timer_of_register.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-omap@vger.kernel.org
Cc: spear-devel@list.st.com
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Commit 51482be9 (ARM: OMAP: USB: Add phy binding information) forgot to
add phy binding for RX-51, and as a result USB does not work anymore on
3.9-rc1. Add the missing binding.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit bbd707ac {ARM: omap2: use machine specific hook for late init}
accidentally added two declarations for omap4430_init_late().
Remove the duplicate declaration.
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is needed because the omap_mux_get_by_name()
function calls the _omap_mux_get_by_name subfunction
for each mux partition until needed mux is not found.
As a result, we get messages like
"Could not find signal XXX" for each partition
where this mux name does not exist.
This patch fixes wrong error message in
the _omap_mux_get_by_name() function moving it
to the omap_mux_get_by_name() one and as result
reduces noise in the kernel log.
My kernel log without this patch:
[...]
[ 0.221801] omap_mux_init: Add partition: #2: wkup, flags: 3
[ 0.222045] _omap_mux_get_by_name: Could not find signal fref_clk0_out.sys_drm_msecure
[ 0.222137] _omap_mux_get_by_name: Could not find signal sys_nirq
[ 0.222167] _omap_mux_get_by_name: Could not find signal sys_nirq
[ 0.225006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[ 0.225006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[ 0.270111] _omap_mux_get_by_name: Could not find signal fref_clk4_out.fref_clk4_out
[ 0.273406] twl: not initialized
[...]
My kernel log with this patch:
[...]
[ 0.221771] omap_mux_init: Add partition: #2: wkup, flags: 3
[ 0.222106] omap_mux_get_by_name: Could not find signal sys_nirq
[ 0.224945] omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
[ 0.274536] twl: not initialized
[...]
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP's debugfs interface creates one file
for each signal in the mux table, such file
provides a read method but didn't provide
read permission. Fix it.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We should not select drivers from kconfig as they should by default
be optional. Otherwise we'll be chasing broken dependencies forever:
warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250
which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS)
Fix the issue by removing the selects for zoom and add them to
omap2plus_defconfig.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The .init_late callback for OMAP3 has been missing for DT
builds, which causes a lot of late PM initializations to
be missed in turn.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 6797b4fe (ARM: OMAP2+: Prevent potential crash if GPMC probe fails)
added code to ensure that GPMC chip-selects could not be requested until the
device probe was successful. The chip-selects should have been
unreserved at the end of the probe function, but the code to unreserve
them appears to have ended up in the gpmc_calc_timings() function and
hence, this is causing problems requesting chip-selects. Fix this merge
error by unreserving the chip-selects at the end of the probe, but
before we call the gpmc child probe functions (for device-tree) which
request a chip-select.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Philip Avinash <avinashphilip@ti.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
[tony@atomide.com: updated description to add breaking commit id]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This branch contains changes for OMAP that came in late during the release
staging, close to when the merge window opened.
It contains, among other things:
- OMAP PM fixes and some patches for audio device integration
- OMAP clock fixes related to common clock conversion
- A set of patches cleaning up WFI entry and blocking.
- A set of fixes and IP block support for PM on TI AM33xx SoCs (Beaglebone, etc)
- A set of smaller fixes and cleanups around AM33xx restart and revision
detection, as well as removal of some dead code (CONFIG_32K_TIMER_HZ)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJRL9AUAAoJEIwa5zzehBx3BiIQAIwJOAZQhbIsDAmqVAGfj39i
Y6DneECJ3BvrMsC3nk6IUOC/aW5uUi2GAmhYI6YuDDKzLfeTSGW2VQcMa98cvWig
dLo2CPqKuuB7YZAwHkg4i3BwHVJcaPntaKOajNmhwJQIiNEiXCauP/f9kG2NKvHu
XxlWuNyeEB1uQlnB0nXL+HHqcHKxproK6eIvILWYJMdVYnMn+57O3yWBmXkCr07b
9oOa1NdR+4xN7cSbS5YGUfxqwDWnXSZSKggXEPLglHObmSqj7R7NDBNgRR7ui8+t
c3UYljPsiRprY8TYVTbator9wyYocZ6pMja+vrPwATHUMsxGZTurURzpYsyAXaMc
VKWLWItCOOee8CKn1+pGpelon69//EJEFIsg1hChJJZKMRLHYVg48tM64/uN1VOo
Mu/6XDLx4DearMxZv5pZ7Qe0IkIDGtlpyIwo1Yy6T5xEC6pcwRG0XeTuQtOxndFc
XUcXrE+Nlg3eW/6xtB7XhftnKVoBsCrIQ5Z+PxMw1QNUTXWxQwZffeBLxGenuoD6
IofLCdjVyRMcPnVj+s29ZO5k7yMllQ0dO8bySxoU2Y2QvD7wUdZxGDY5Nu7cwfAt
jL0sEpT32g4ZSD8R75qt+qTDWv/IjB4EE/uNw3y2AUSTT5A+cN7H3MXw5s7hm8nI
fw5cYz37iH0zUZhoIU/w
=/vBT
-----END PGP SIGNATURE-----
Merge tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late OMAP changes from Olof Johansson:
"This branch contains changes for OMAP that came in late during the
release staging, close to when the merge window opened.
It contains, among other things:
- OMAP PM fixes and some patches for audio device integration
- OMAP clock fixes related to common clock conversion
- A set of patches cleaning up WFI entry and blocking.
- A set of fixes and IP block support for PM on TI AM33xx SoCs
(Beaglebone, etc)
- A set of smaller fixes and cleanups around AM33xx restart and
revision detection, as well as removal of some dead code
(CONFIG_32K_TIMER_HZ)"
* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
ARM: omap2: include linux/errno.h in hwmod_reset
ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
ARM: OMAP4: hwmod data: Enable AESS hwmod device
ARM: OMAP4: hwmod data: Update AESS data with memory bank area
ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
ASoC: TI AESS: add autogating-enable function, callable from architecture code
ARM: OMAP2+: hwmod: add enable_preprogram hook
ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
ARM: OMAP2+: AM33XX: Update the hardreset API
ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
...
Pull LED subsystem update from Bryan Wu.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits)
leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
leds: 88pm860x: Add missing of_node_put()
leds: tca6507: Use of_get_child_count()
leds: leds-pwm: make it depend on PWM and not HAVE_PWM
Documentation: leds: update LP55xx family devices
leds-lp55xx: fix problem on removing LED attributes
leds-lp5521/5523: add author and copyright description
leds-lp5521/5523: use new lp55xx common header
leds-lp55xx: clean up headers
leds-lp55xx: clean up definitions
leds-lp55xx: clean up unused data and functions
leds-lp55xx: clean up _remove()
leds-lp55xx: add new function for removing device attribtues
leds-lp55xx: code refactoring on selftest function
leds-lp55xx: use common device attribute driver function
leds-lp55xx: support device specific attributes
leds-lp5523: use generic firmware interface
leds-lp5521: use generic firmware interface
leds-lp55xx: support firmware interface
leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
...
No new drivers this time, but a bunch of fairly big cleanups:
- Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation,
OMAP5 support and clock management code cleanup.
- The first step of a major sync for the ab8500 driver from Lee Jones. In
particular, the debugfs and the sysct interfaces got extended and improved.
- Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core
driver, with a much needed module id lookup code improvement.
- The regular wm5102 and arizona cleanups and fixes from Mark Brown.
- Laxman Dewangan extended the palmas APIs in order to implement the palmas
GPIO and rt drivers.
- Laxman also added DT support for the tps65090 driver.
- The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and
Darren Hart.
- Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based
devices to switch to the new abx500 pin-ctrl driver.
- The max8925 now has device tree and irqdomain support thanks to Qing Xu.
- The recently added rtsx driver got a few cleanups and fixes for a better
card detection code path and now also supports the RTS5227 chipset, thanks
to Wei Wang and Roger Tseng.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=BhC1
-----END PGP SIGNATURE-----
Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Pull MFS updates from Samuel Ortiz:
"This is the MFD pull request for the 3.9 merge window.
No new drivers this time, but a bunch of fairly big cleanups:
- Roger Quadros worked on a OMAP USBHS and TLL platform data
consolidation, OMAP5 support and clock management code cleanup.
- The first step of a major sync for the ab8500 driver from Lee
Jones. In particular, the debugfs and the sysct interfaces got
extended and improved.
- Peter Ujfalusi sent a nice patchset for cleaning and fixing the
twl-core driver, with a much needed module id lookup code
improvement.
- The regular wm5102 and arizona cleanups and fixes from Mark Brown.
- Laxman Dewangan extended the palmas APIs in order to implement the
palmas GPIO and rt drivers.
- Laxman also added DT support for the tps65090 driver.
- The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
and Darren Hart.
- Linus Walleij patchset for the ab8500 driver allowed ab8500 and
ab9540 based devices to switch to the new abx500 pin-ctrl driver.
- The max8925 now has device tree and irqdomain support thanks to
Qing Xu.
- The recently added rtsx driver got a few cleanups and fixes for a
better card detection code path and now also supports the RTS5227
chipset, thanks to Wei Wang and Roger Tseng."
* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
mfd: lpc_ich: Use devres API to allocate private data
mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
mfd: lpc_sch: Accomodate partial population of the MFD devices
mfd: da9052-i2c: Staticize da9052_i2c_fix()
mfd: syscon: Fix sparse warning
mfd: twl-core: Fix kernel panic on boot
mfd: rtsx: Fix issue that booting OS with SD card inserted
mfd: ab8500: Fix compile error
mfd: Add missing GENERIC_HARDIRQS dependecies
Documentation: Add docs for max8925 dt
mfd: max8925: Add dts
mfd: max8925: Support dt for backlight
mfd: max8925: Fix onkey driver irq base
mfd: max8925: Fix mfd device register failure
mfd: max8925: Add irqdomain for dt
mfd: vexpress: Allow vexpress-sysreg to self-initialise
mfd: rtsx: Support RTS5227
mfd: rtsx: Implement driving adjustment to device-dependent callbacks
mfd: vexpress: Add pseudo-GPIO based LEDs
mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
...
omap_hwmod_lookup() only returns NULL on error, never an error pointer.
Checking the returned pointer using IS_ERR_OR_NULL() is needless
overhead. Use a simple !ptr check instead.
OMAP devices (oh->od) always have a valid platform device attached (see
omap_device_alloc()) so there's no point validating the platform device
pointer (we will have already oopsed long before if this is not the
case here.)
Lastly, oh->od is only ever NULL or a valid omap device pointer - 'oh'
comes from the statically declared hwmod tables, and the pointer is
only filled in by omap_device_alloc() at a point where the omap device
pointer must be valid.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
pwrdm_can_ever_lose_context() is only ever called from the OMAP GPIO
code, and only with a pointer returned from omap_hwmod_get_pwrdm().
omap_hwmod_get_pwrdm() only ever returns NULL on error, so using
IS_ERR_OR_NULL() to validate the passed pointer is silly. Use a
simpler !ptr check instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Debugfs functions return NULL when they fail, or an error pointer
when not configured. The intention behind the error pointer is that
it appears as a valid pointer to the caller, and so the caller
continues inspite of debugfs not being available.
Debugfs failure should only ever be checked with (!ptr) and not the
IS_ERR*() functions.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This contains parts of the ARM KVM support that have dependencies on
other patches merged through the arm-soc tree. In combination with
patches coming through Russell's tree, this will finally add full
support for the kernel based virtual machine on ARM, which has
been awaited for some time now.
Further, we now have a separate platform for virtual machines
and qemu booting that is used by both Xen and KVM, separating
these from the Versatile Express reference implementation.
Obviously, this new platform is multiplatform capable so it
can be combined with existing machines in the same kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=u9F0
-----END PGP SIGNATURE-----
Merge tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM virtualization changes:
"This contains parts of the ARM KVM support that have dependencies on
other patches merged through the arm-soc tree. In combination with
patches coming through Russell's tree, this will finally add full
support for the kernel based virtual machine on ARM, which has been
awaited for some time now.
Further, we now have a separate platform for virtual machines and qemu
booting that is used by both Xen and KVM, separating these from the
Versatile Express reference implementation. Obviously, this new
platform is multiplatform capable so it can be combined with existing
machines in the same kernel."
* tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
ARM: arch_timer: include linux/errno.h
arm: arch_timer: add missing inline in stub function
ARM: KVM: arch_timers: Wire the init code and config option
ARM: KVM: arch_timers: Add timer world switch
ARM: KVM: arch_timers: Add guest timer core support
ARM: KVM: Add VGIC configuration option
ARM: KVM: VGIC initialisation code
ARM: KVM: VGIC control interface world switch
ARM: KVM: VGIC interrupt injection
ARM: KVM: vgic: retire queued, disabled interrupts
ARM: KVM: VGIC virtual CPU interface management
ARM: KVM: VGIC distributor handling
ARM: KVM: VGIC accept vcpu and dist base addresses from user space
ARM: KVM: Initial VGIC infrastructure code
ARM: KVM: Keep track of currently running vcpus
KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl
ARM: gic: add __ASSEMBLY__ guard to C definitions
ARM: gic: define GICH offsets for VGIC support
ARM: gic: add missing distributor defintions
ARM: mach-virt: fixup machine descriptor after removal of sys_timer
...
These updates are all for board specific code, including
* defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra
* SD/MMC and I2C support on bcm2835 (Raspberry PI)
* minor updates for PXA
* shmobile updates to GPIO usage in board files
* More things in OMAP board files are moved over to device tree probing
* Better support for audio devices on some OMAP platforms
Conflicts include the omap board-apollon.c file that is removed without
a replacement, and conflicting context in the 4430sdp board file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/qBE
-----END PGP SIGNATURE-----
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes from Arnd Bergmann:
"These updates are all for board specific code, including
- defconfig updates for shmobile, davinci, bcm2835, imx, omap and
tegra
- SD/MMC and I2C support on bcm2835 (Raspberry PI)
- minor updates for PXA
- shmobile updates to GPIO usage in board files
- More things in OMAP board files are moved over to device tree
probing
- Better support for audio devices on some OMAP platforms"
* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
ARM: imx_v4_v5_defconfig: Add VPU support
ARM: imx: configs: enable netfilter support
ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
ARM: shmobile: armadillo800eva: set clock rates before timer init
ARM: tegra: defconfig updates
ARM: shmobile: mackerel: Use gpio_request_one()
ARM: shmobile: kzm9g: Use gpio_request_one()
ARM: shmobile: bonito: Use gpio_request_one()
...
This is a larger set of new functionality for the existing SoC families,
including:
* vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850
* prima2 gains support for the "marco" SoC family, its SMP based cousin
* tegra gains support for the new Tegra4 (Tegra114) family
* socfpga now supports a newer version of the hardware including SMP
* i.mx31 and bcm2835 are now using DT probing for their clocks
* lots of updates for sh-mobile
* OMAP updates for clocks, power management and USB
* i.mx6q and tegra now support cpuidle
* kirkwood now supports PCIe hot plugging
* tegra clock support is updated
* tegra USB PHY probing gets implemented diffently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=PRrg
-----END PGP SIGNATURE-----
Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC-specific updates from Arnd Bergmann:
"This is a larger set of new functionality for the existing SoC
families, including:
- vt8500 gains support for new CPU cores, notably the Cortex-A9 based
wm8850
- prima2 gains support for the "marco" SoC family, its SMP based
cousin
- tegra gains support for the new Tegra4 (Tegra114) family
- socfpga now supports a newer version of the hardware including SMP
- i.mx31 and bcm2835 are now using DT probing for their clocks
- lots of updates for sh-mobile
- OMAP updates for clocks, power management and USB
- i.mx6q and tegra now support cpuidle
- kirkwood now supports PCIe hot plugging
- tegra clock support is updated
- tegra USB PHY probing gets implemented diffently"
* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
ARM: prima2: remove duplicate v7_invalidate_l1
ARM: shmobile: r8a7779: Correct TMU clock support again
ARM: prima2: fix __init section for cpu hotplug
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
arm: socfpga: Add SMP support for actual socfpga harware
arm: Add v7_invalidate_l1 to cache-v7.S
arm: socfpga: Add entries to enable make dtbs socfpga
arm: socfpga: Add new device tree source for actual socfpga HW
ARM: tegra: sort Kconfig selects for Tegra114
ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
ARM: tegra: Fix build error for gic update
ARM: tegra: remove empty tegra_smp_init_cpus()
ARM: shmobile: Register ARM architected timer
ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
ARM: shmobile: r8a7779: Correct TMU clock support
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
...
Converting more ARM platforms to multiplatform support. This time, OMAP
gets converted, which is a major step since this is by far the largest
platform in terms of code size. The same thing happens to the vt8500
platform.
Conflicts include:
* Two mach/uncompress.h files are removed, the changes made to them
elsewhere can be discarded now.
* Moving the OMAP4 irq_match array has context clashes with turning
omap4_sar_ram_init into an omap_early_initcall()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=nl4h
-----END PGP SIGNATURE-----
Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform support from Arnd Bergmann:
"Converting more ARM platforms to multiplatform support. This time,
OMAP gets converted, which is a major step since this is by far the
largest platform in terms of code size. The same thing happens to the
vt8500 platform."
* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
ARM: OMAP2+: Make sure files with omap initcalls include soc.h
ARM: OMAP2+: Include soc.h to drm.c to fix compiling
ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
ARM: multi_v7_defconfig: add ARCH_ZYNQ
ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
arm: vt8500: Remove remaining mach includes
arm: vt8500: Convert debug-macro.S to be multiplatform friendly
arm: vt8500: Remove single platform Kconfig options
ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
ARM: OMAP2+: Add minimal support for booting vexpress
ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
ARM: OMAP2+: Disable code that currently does not work with multiplaform
ARM: OMAP2+: Add multiplatform debug_ll support
ARM: OMAP: Fix dmaengine init for multiplatform
ARM: OMAP: Fix i2c cmdline initcall for multiplatform
ARM: OMAP2+: Use omap initcalls
ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
* Updates to the ux500 cpufreq code
* Moving the u300 DMA controller driver to drivers/dma
* Moving versatile express drivers out of arch/arm for sharing with arch/arm64
* Device tree bindings for the OMAP General Purpose Memory Controller
There is a simple conflict in drivers/cpufreq/dbx500-cpufreq.c, because
the mach/id.h header and the cpu_is_u8500_family() function in it are
now gone.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=R0p0
-----END PGP SIGNATURE-----
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver specific changes from Arnd Bergmann:
- Updates to the ux500 cpufreq code
- Moving the u300 DMA controller driver to drivers/dma
- Moving versatile express drivers out of arch/arm for sharing with arch/arm64
- Device tree bindings for the OMAP General Purpose Memory Controller
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
ARM: OMAP2+: gpmc: add DT bindings for OneNAND
ARM: OMAP2+: gpmc-onenand: drop __init annotation
mtd: omap-onenand: pass device_node in platform data
ARM: OMAP2+: Prevent potential crash if GPMC probe fails
ARM: OMAP2+: gpmc: Remove unneeded of_node_put()
arm: Move sp810.h to include/linux/amba/
ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
ARM: OMAP: gpmc-nand: drop __init annotation
mtd: omap-nand: pass device_node in platform data
ARM: OMAP: gpmc: don't create devices from initcall on DT
dma: coh901318: cut down on platform data abstraction
dma: coh901318: merge header files
dma: coh901318: push definitions into driver
dma: coh901318: push header down into the DMA subsystem
dma: coh901318: skip hard-coded addresses
dma: coh901318: remove hardcoded target addresses
dma: coh901318: push platform data into driver
dma: coh901318: create a proper platform data file
...
A large number of cleanups, all over the platforms. This is dominated
largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
others moving code out of arch/arm into more appropriate subsystems.
The clocksource and irqchip drivers are now abstracted to the point
where platforms that are already cleaned up do not need to even specify
the driver they use, it can all get configured from the device tree
as we do for normal device drivers. The clocksource changes basically
touch every single platform in the process.
We further clean up the use of platform specific header files here,
with the goal of turning more of the platforms over to being
"multiplatform" enabled, which implies that they cannot expose
their headers to architecture independent code any more.
It is expected that no functional changes are part of the cleanup.
The overall reduction in total code lines is mostly the result of
removing broken and obsolete code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=DvgJ
-----END PGP SIGNATURE-----
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"A large number of cleanups, all over the platforms. This is dominated
largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
others moving code out of arch/arm into more appropriate subsystems.
The clocksource and irqchip drivers are now abstracted to the point
where platforms that are already cleaned up do not need to even
specify the driver they use, it can all get configured from the device
tree as we do for normal device drivers. The clocksource changes
basically touch every single platform in the process.
We further clean up the use of platform specific header files here,
with the goal of turning more of the platforms over to being
"multiplatform" enabled, which implies that they cannot expose their
headers to architecture independent code any more.
It is expected that no functional changes are part of the cleanup.
The overall reduction in total code lines is mostly the result of
removing broken and obsolete code."
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
ARM: mvebu: correct gated clock documentation
ARM: kirkwood: add missing include for nsa310
ARM: exynos: move exynos4210-combiner to drivers/irqchip
mfd: db8500-prcmu: update resource passing
drivers/db8500-cpufreq: delete dangling include
ARM: at91: remove NEOCORE 926 board
sunxi: Cleanup the reset code and add meaningful registers defines
ARM: S3C24XX: header mach/regs-mem.h local
ARM: S3C24XX: header mach/regs-power.h local
ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
ARM: S3C24XX: transform s3c2443 subirqs into new structure
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: Move irq syscore-ops to irq-pm
clocksource: always define CLOCKSOURCE_OF_DECLARE
...
Bug fixes that did not make it into v3.8, mostly because they were not
considered important enough, and in some cases because bugs only show
up in combination with other patches destined for 3.9.
This includes a few larger patches for GPIO on the Marvell PXA platform
and a lot of Samsung specific bug fixes, as well as a series from Arnd
to fix older build warnings.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=BbV4
-----END PGP SIGNATURE-----
Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
"Bug fixes that did not make it into v3.8, mostly because they were not
considered important enough, and in some cases because bugs only show
up in combination with other patches destined for 3.9. This includes
a few larger patches for GPIO on the Marvell PXA platform and a lot of
Samsung specific bug fixes, as well as a series from Arnd to fix older
build warnings."
* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
scripts/sortextable: silence script output
ARM: s3c: i2c: add platform_device forward declaration
ARM: mvebu: allow selecting mvebu without Armada XP
ARM: pick Versatile by default for !MMU
ARM: integrator: fix build with INTEGRATOR_AP off
ARM: integrator/versatile: fix NOMMU warnings
ARM: sa1100: don't warn about mach/ide.h
ARM: shmobile: fix defconfig warning on CONFIG_USB
ARM: w90x900: fix legacy assembly syntax
ARM: samsung: fix assembly syntax for new gas
ARM: disable virt_to_bus/virt_to_bus almost everywhere
ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
ARM: SAMSUNG: Silence empty switch warning in sdhci.h
ARM: msm: proc_comm_boot_wait should not be __init
arm: vt8500: Update MAINTAINERS entry for arch-vt8500
ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
ARM: S5PV210: Fix early uart output in fifo mode
...
Here's the big USB merge for 3.9-rc1
Nothing major, lots of gadget fixes, and of course, xhci stuff.
All of this has been in linux-next for a while, with the exception of
the last 3 patches, which were reverts of patches in the tree that
caused problems, they went in yesterday.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmZ/kACgkQMUfUDdst+ylEhwCgyM0JEOgLuW7M8D+oNcitZn51
g7oAniD0IkLG8RCB8plLj+82AvthalCo
=bHSs
-----END PGP SIGNATURE-----
Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg Kroah-Hartman:
"Here's the big USB merge for 3.9-rc1
Nothing major, lots of gadget fixes, and of course, xhci stuff.
All of this has been in linux-next for a while, with the exception of
the last 3 patches, which were reverts of patches in the tree that
caused problems, they went in yesterday."
* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
Revert "USB: EHCI: make ehci-vt8500 a separate driver"
Revert "USB: EHCI: make ehci-orion a separate driver"
Revert "USB: update host controller Kconfig entries"
USB: update host controller Kconfig entries
USB: EHCI: make ehci-orion a separate driver
USB: EHCI: make ehci-vt8500 a separate driver
USB: usb-storage: unusual_devs update for Super TOP SATA bridge
USB: ehci-omap: Fix autoloading of module
USB: ehci-omap: Don't free gpios that we didn't request
USB: option: add Huawei "ACM" devices using protocol = vendor
USB: serial: fix null-pointer dereferences on disconnect
USB: option: add Yota / Megafon M100-1 4g modem
drivers/usb: add missing GENERIC_HARDIRQS dependencies
USB: storage: properly handle the endian issues of idProduct
testusb: remove all mentions of 'usbfs'
usb: gadget: imx_udc: make it depend on BROKEN
usb: omap_control_usb: fix compile warning
ARM: OMAP: USB: Add phy binding information
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: OMAP: devices: create device for usb part of control module
...
Here's the big staging tree merge for 3.9-rc1
Lots of cleanups and updates for drivers all through the staging tree.
We are pretty much "code neutral" here, adding just about as many lines
as we removed.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEUEABECAAYFAlEmW7QACgkQMUfUDdst+ymlIACXT5mv8Y5A/KJa+QLTNNsofI8u
aACgq9hNZxJzX6VQMLXUV8+2SILOqYo=
=5wIj
-----END PGP SIGNATURE-----
Merge tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg Kroah-Hartman:
"Here's the big staging tree merge for 3.9-rc1
Lots of cleanups and updates for drivers all through the staging tree.
We are pretty much "code neutral" here, adding just about as many
lines as we removed.
All of these have been in linux-next for a while."
* tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (804 commits)
staging: comedi: vmk80xx: wait for URBs to complete
staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolon
staging: et131x: Update TODO list
staging: et131x: Remove assignment of skb->dev
staging: wlan-ng: hfa384x.h: fix for error reported by smatch
staging/zache checkpatch ERROR: spaces prohibited around that
staging/ozwpan: Mark read only parameters and structs as const
staging/ozwpan: Remove empty and unused function oz_cdev_heartbeat
staging/ozwpan: Mark local functions as static (fix sparse warnings)
staging/ozwpan: Add missing header includes
staging/usbip: Mark local functions as static (fix sparse warnings)
staging/xgifb: Remove duplicated code in loops.
staging/xgifb: Consolidate return paths
staging/xgifb: Remove code without effect
staging/xgifb: Remove unnecessary casts
staging/xgifb: Consolidate if/else if with identical code branches
staging: vt6656: replaced custom TRUE definition with true
staging: vt6656: replaced custom FALSE definition with false
staging: vt6656: replace custom BOOL definition with bool
staging/rtl8187se: Mark functions as static to silence sparse
...
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
Pull networking update from David Miller:
1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
timestamp offset. From Andrey Vagin.
2) VMWARE VM VSOCK layer, from Andy King.
3) Much improved support for virtual functions and SR-IOV in bnx2x,
from Ariel ELior.
4) All protocols on ipv4 and ipv6 are now network namespace aware, and
all the compatability checks for initial-namespace-only protocols is
removed. Thanks to Tom Parkin for helping deal with the last major
holdout, L2TP.
5) IPV6 support in netpoll and network namespace support in pktgen,
from Cong Wang.
6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
Protocol (MVRP) support, from David Ward.
7) Compute packet lengths more accurately in the packet scheduler, from
Eric Dumazet.
8) Use per-task page fragment allocator in skb_append_datato_frags(),
also from Eric Dumazet.
9) Add support for connection tracking labels in netfilter, from
Florian Westphal.
10) Fix default multicast group joining on ipv6, and add anti-spoofing
checks to 6to4 and 6rd. From Hannes Frederic Sowa.
11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
times, rearrange inet frag datastructures for better cacheline
locality, and move more operations outside of locking. From Jesper
Dangaard Brouer.
12) Instead of strict master <--> slave relationships, allow arbitrary
scenerios with "upper device lists". From Jiri Pirko.
13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
Pirko.
14) Add a BPF filter netfilter match target, from Willem de Bruijn.
15) Orphan and delete a bunch of pre-historic networking drivers from
Paul Gortmaker.
16) Add TSO support for GRE tunnels, from Pravin B SHelar. Although
this still needs some minor bug fixing before it's %100 correct in
all cases.
17) Handle unresolved IPSEC states like ARP, with a resolution packet
queue. From Steffen Klassert.
18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
Hemminger. This was long overdue.
19) Support SO_REUSEPORT, from Tom Herbert.
20) Allow locking a socket BPF filter, so that it cannot change after a
process drops capabilities.
21) Add VLAN filtering to bridge, from Vlad Yasevich.
22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
the ipv6 routes, from YOSHIFUJI Hideaki.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
ipv6: fix race condition regarding dst->expires and dst->from.
net: fix a wrong assignment in skb_split()
ip_gre: remove an extra dst_release()
ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
atl1c: restore buffer state
net: fix a build failure when !CONFIG_PROC_FS
net: ipv4: fix waring -Wunused-variable
net: proc: fix build failed when procfs is not configured
Revert "xen: netback: remove redundant xenvif_put"
net: move procfs code to net/core/net-procfs.c
qmi_wwan, cdc-ether: add ADU960S
bonding: set sysfs device_type to 'bond'
bonding: fix bond_release_all inconsistencies
b44: use netdev_alloc_skb_ip_align()
xen: netback: remove redundant xenvif_put
net: fec: Do a sanity check on the gpio number
ip_gre: propogate target device GSO capability to the tunnel device
ip_gre: allow CSUM capable devices to handle packets
bonding: Fix initialize after use for 3ad machine state spinlock
bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
...
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.
These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.
Note that this branch will conflict with c1d1cd597f
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=svW/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.
These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.
Note that this branch will conflict with c1d1cd597f
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.
[arnd - resolved the merge conflict]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly created omap_hwmod_reset.c is missing an
include of linux/errno.h in commit c02060d8 "ARM:
OMAP4+: AESS: enable internal auto-gating during
initial setup". It still works in omap2_defconfig,
but not in all other combinations.
Without this patch, building allmodconfig results in:
arch/arm/mach-omap2/omap_hwmod_reset.c: In function 'omap_hwmod_aess_preprogram':
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: error: 'EINVAL' undeclared (first use in this function)
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Sebastien Guiriec <s-guiriec@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRAuO3AAoJEHm+PkMAQRiGbfAH/1C3QQKB11aBpYLAw7qijAze
yOui26UCnwRryxsO8zBCQjGoByy5DvY/Q0zyUCWUE6nf/JFSoKGUHzfJ1ATyzGll
3vENP6Fnmq0Hgc4t8/gXtXrZ1k/c43cYA2XEhDnEsJlFNmNj2wCQQj9njTNn2cl1
k6XhZ9U1V2hGYpLL5bmsZiLVI6dIpkCVw8d4GZ8BKxSLUacVKMS7ml2kZqxBTMgt
AF6T2SPagBBxxNq8q87x4b7vyHYchZmk+9tAV8UMs1ecimasLK8vrRAJvkXXaH1t
xgtR0sfIp5raEjoFYswCK+cf5NEusLZDKOEvoABFfEgL4/RKFZ8w7MMsmG8m0rk=
=m68Y
-----END PGP SIGNATURE-----
Merge branch 'omap/multiplatform-fixes', tag 'v3.8-rc5' into next/multiplatform
The omap multiplatform support uncovered a bug in the cwdavinci_cpdma
code and was missing two drivers that are enabled now but are not
quite ready for multiplatform, as found by allyesconfig builds.
There is also a conflict generated by automated merge in
arch/arm/mach-omap2/drm.c between a bug fix that went into v3.8-rc5
and a different version of the same fix that went into the
omap/multiplatform branch. This merge removes the extraneous
#include that was causing build errors.
* omap/multiplatform-fixes:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Let's have a single platform data structure for the OMAP's High-Speed
USB host subsystem instead of having 3 separate ones i.e. one for
board data, one for USB Host (UHH) module and one for USB-TLL module.
This makes the code much simpler and avoids creating multiple copies of
platform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Use the future proof TWL_MODULE_PWM module id instead to aim the twl-core
cleanup planed for 3.9 kernel cycle.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Some OMAP4 power management fixes and audio device integration
patches. This pull request contains a fix for an issue discovered during
branch integration.
Basic test logs are available at:
http://www.pwsan.com/omap/testlogs/omap4_prcm_devel_a_3.9/20130210112717/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRGTdOAAoJEBvUPslcq6Vz99AP/2d62cVqYa3Q3cjy2OTOGkxw
/A4sezgewvfJLo8s4i4QPUgYD0I6nka09MzkPOzTMfOKCQbWP70jKKrccOkDWH0s
/cYW2qb3SOEhfGeDK7Ktnx1Eo55X6V8zpw/KfQI+HWABHPFIJsmy79V1BnLrp2q/
l0nj5QduumAvohbza+L1axs7AkhXW6aD3JKi4F0Oz7wVUIpyNWAW8OfVU1M46D8E
IB3uHnx5u7yzKpxgnJhQEWsP75VoDCUuPj4pzdFKMOCGB/eEpDJb6rGbyqa/FJP+
35sobhlaBXO+bAm1el0ScyTiE6793xeKd8RijiHkI56sh7Cg+6iTrEJpqxsxnfEg
wQCpKMk+xldF/pvCatXJtpE9QkzzSkbLjRi4iCb1mmfpo9ZFQaZ9c1tzJax33HIs
GJAX8jXp45z93s6iYOo0GlkSLteSj5HtuFZMRXbqY2uebiDo1RO/VXERazul/15o
diEIcAS5Yu2sre05Ydyr1f3z5cJyI0bAaUq89zsYlKBCdfUg+WBH3ddIQ20zL3eV
uspHsIq2kpfaW8PPB+4Q2LbWUQ+qgqOvejHGFj80bLCV2ntDjzMGg3v6+Ktj7UTs
RlGtrdRVy+/G/A3rKBkLL6MxbwGVpcSQprh0naE2XnY53HuHQ9bwXd0ZfilYy7YA
bQChElTBohBSrwI4IaqD
=Qbkt
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/pm-omap4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
omap4 pm changes via Paul Walmsley <paul@pwsan.com>:
Some OMAP4 power management fixes and audio device integration
patches. This pull request contains a fix for an issue discovered during
branch integration.
Basic test logs are available at:
http://www.pwsan.com/omap/testlogs/omap4_prcm_devel_a_3.9/20130210112717/
* tag 'omap-for-v3.9/pm-omap4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: Enable AESS hwmod device
ARM: OMAP4: hwmod data: Update AESS data with memory bank area
ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
ASoC: TI AESS: add autogating-enable function, callable from architecture code
ARM: OMAP2+: hwmod: add enable_preprogram hook
ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
ARM: OMAP4: PM: Warn users about usage of older bootloaders
Some miscellaneous OMAP2+ clock fixes, mostly related to the recent
common clock framework conversion.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/clock_devel_a_3.9/20130208120108/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=4h7x
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/clock-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
omap clock changes via Paul Walmsley <paul@pwsan.com>:
Some miscellaneous OMAP2+ clock fixes, mostly related to the recent
common clock framework conversion.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/clock_devel_a_3.9/20130208120108/
* tag 'omap-for-v3.9/clock-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
ARM: OMAP AM33XX: clock data: SET_RATE_PARENT in lcd path
ARM: OMAP2+: clock data: add DEFINE_STRUCT_CLK_FLAGS helper
ARM: OMAP2+: dpll: am335x - avoid freqsel
omap3isp: Set cam_mclk rate directly
ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5
On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
Conflicts:
arch/arm/mach-omap2/pm24xx.c
Note that this is based on earlier omap-for-v3.9/pm-signed because
of a non-trivial merge conflict. This branch also contains a fix
for c1d1cd59 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats
and early_device code").
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=lEfd
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/pm-wfi-take2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
omap pm wfi changes via Paul Walmsley <paul@pwsan.com>:
On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
Conflicts:
arch/arm/mach-omap2/pm24xx.c
Note that this is based on earlier omap-for-v3.9/pm-signed because
of a non-trivial merge conflict. This branch also contains a fix
for c1d1cd59 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats
and early_device code").
* tag 'omap-for-v3.9/pm-wfi-take2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
ARM: OMAP AM3517/05: hwmod data: block WFI when EMAC active
ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions
ARM: OMAP2xxx: CM: remove autodep handling
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock
ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
ARM: OMAP2: PM/powerdomain: drop unnecessary pwrdm_wait_transition()
ARM: OMAP2xxx: PM: clean up some crufty powerstate programming code
ARM: OMAP2+: clockdomain: add pwrdm_state_switch() call to clkdm_sleep()
ARM: OMAP2+: powerdomain: fix powerdomain trace integration
ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control
ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()
ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
ARM: OMAP3xxx: CPUIdle: simplify the PER next-state code
...
Fixes and IP block support for the TI AM33xx family of SoCs. These
are prerequisites for power management and some PWM driver changes.
Basic test logs are available from:
http://www.pwsan.com/omap/testlogs/am33xx_fixes_a_3.9/20130208084835/
although it must be noted that I am unable to test these patches on
AM33xx due to an unknown problem with v3.8-rc kernels:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg83525.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRGTWiAAoJEBvUPslcq6Vz7M0P/0O1sI6j7mEzcIS1uqUinwwE
66XHhzwIWBHNg9MDdnf1MT6CT0YMhFDVs5jDtCu7KuKxNTXm4zoHB7nO/9ARQzSc
Z5zi0mcwA1ufLRAQ+xbr7gEtlqZUrHBVSmC6IG7uuJVKhgTd3xK7dfiOFb6HPynw
g3p7eUf86xnXPAnWT+06U4SXlN4rGBWpPsm3Hdqoq51nPNgM+VZNqjQYRqlwe79a
PqFrYhGlE7RFUsW/UAsUDo39XphF4TGG6V08WBytRR6ErAGQe2jTugM/LdID8YKl
orRRYCEtPqAKvTU/VrPVPfsUHLUSHJJxjU6axNSXYAtsJd4gtGNN+203KRpguPgj
3YXzBnngN/IT2zb6EJdHT8ueMNRlErqwHtMl9uRqq/VvPCccgrgX1De+/+rryGtH
13IvYndTfT7I9YPl4eS6ncA0PMlyQLSbANHGv9K0yvrmiLCB/XgrA5YhHuKT9mET
KILHp+Ng2yUzx3bDNOvjLoZGjf3Wvt+3QrqwOA0RS76bt04PLSADCc23E1Tv9lS0
JbtvFZSdCirLq7TQ9lleYfUKihP2iJyHQ8lmiUvZPVRmCkY6SPxkhtEz0Le+q+Zh
ZjQkHIsgPATYmNf7SSs6LNQUDn0QgQUbVu/ZcCANTKuJ0SVFv06NbdBzm9z7zkC7
VA+Tpg1UVIznnehwAZcH
=mRME
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/am33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
am33xx updates via Paul Walmsley <paul@pwsan.com>:
Fixes and IP block support for the TI AM33xx family of SoCs. These
are prerequisites for power management and some PWM driver changes.
Basic test logs are available from:
http://www.pwsan.com/omap/testlogs/am33xx_fixes_a_3.9/20130208084835/
although it must be noted that I am unable to test these patches on
AM33xx due to an unknown problem with v3.8-rc kernels:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg83525.html
* tag 'omap-for-v3.9/am33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
ARM: OMAP2+: AM33XX: Update the hardreset API
ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
ARM: OMAP2+: AM33XX: CM: Get rid of unnecessary header inclusions
Commit c1d1cd597f ("ARM: OMAP2+:
omap_device: remove obsolete pm_lats and early_device code") missed a
few omap_device_build() calls that aren't included as part of the default
OMAP2+ Kconfig, omap2plus_defconfig.
Ideally, all devices that are present on the SoC should be created by
default, and only the corresponding device driver should be configured
or deconfigured in Kconfig. This allows drivers to be built as
modules and loaded later, even if they weren't part of the original
kernel build. Unfortunately, we're not quite there yet.
Thanks to Tony Lindgren for reporting this, found during his
randconfig tests.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRFTM3AAoJEMePsQ0LvSpLyJ8P/ipCXyynb1wmYf5Qm0O8jrgS
a+jS3RD/o+N9RmnerkhfKh4PELolHF5iYvRSX/Iygu4oPWJFlugVw8MQS5R7mqO5
4LSh8oazYjym20txURp3rp3W8sAq2lX+fBjDVqmHKOmckG6LyBMwd2EEmaS0owa3
5mv6Gb8ySyhVFkKnabIHHFaxVBy8rI5Ay4I+bBNInZI4QJh71guJu27Cb1Sg2ng/
TmMqTllWyb4dnbx3u1jw7MCE7e6VMHFU59d8q7aj0wr1yJXzUrZ8wDYYycmHW2ye
yq3E6MNnKzXyrHYoLCvkJl8mrx0bZIohYycA3WNl3BMSTlllx3gBWuD/+z6nWnkq
JIG8jRp6DysgEXjHuQXHT5lawSg2ByjKkk0kPOLCXdRFnns9Q75nNFTqR/6SCdON
hM+sKFgbz5jz+H1gtXoaaRGNeoMcsVKTxFQ4vlisgWwFxTWnmRZX0+WzKM/3oO/K
3KIimEh+aEmHQna4cy3HCtcMJy5IovqupTLea/JWUG0kvcfweTeDzr4YKVttuqFD
8+6A+ZeKTNkJG3R1IQ4NlAmOIKGTHSaz0px1eoFZo+kMVB9h8LYgxQ44ulSBNki/
VZcBFaSz67EtgINSnLDBBAP2q79QbsOLSz784rofWQdU6h/e2lK7lmDCawAzlz7C
nhPTm0BRVfzeC1D4Gds8
=jJVz
-----END PGP SIGNATURE-----
Merge tag 'omap-devel-b-for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.9/pm-wfi-take2
On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
Conflicts:
arch/arm/mach-omap2/pm24xx.c
Enable AESS data in hwmod in order to be able to probe
audio driver.
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add AESS memory bank data in hwmod in order to provide memory address
information to the driver.
This version also changes the AESS main clock to use a
non-CLKCTRL-based functional clock. These are being removed from the
clock data, since they should be handled by the IP block integration
code. Without this change, the kernel crashes during boot. Thanks to
Tony Lindgren for reporting this during a test merge.
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
[paul@pwsan.com: updated to change the AESS main_clk]
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Enable the AESS auto-gating control bit during AESS hwmod setup. This
fixes the following boot warning on OMAP4:
omap_hwmod: aess: _wait_target_disable failed
Without this patch, the AESS IP block does not indicate to the PRCM
that it is idle after it is reset. This prevents some types of SoC
power management until something sets the auto-gating control bit.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
After setup/enable, some IP blocks need some additional setting to
indicate the PRCM that they are inactive until they are configured.
Some examples on OMAP4 include the AESS and FSUSB IP blocks.
To fix this cleanly, this patch adds another optional function
pointer, enable_preprogram, to the IP block's hwmod data. The function
that is pointed to is called by the hwmod code immediately after the
IP block is reset.
This version of the patch includes a patch description fix from Felipe.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Looks like there are few more places that I missed that can cause
compiler warnings. After grepping for omap initcall, all files
needing soc.h should now have it.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
I needed this when compiling for pandaboard.
The reason this is needed is that we are now using
omap_initcalls to keep them multiplatform safe.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update for audio support via omap-twl4030 and pwm updates in board level,
and zoom-peripherals update to not request the TWL GPIO7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=pDtV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/twl-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lidgren:
OMAP TWL updates from Peter Ujfalusi <peter.ujfalusi@ti.com>:
Update for audio support via omap-twl4030 and pwm updates in board level,
and zoom-peripherals update to not request the TWL GPIO7.
* tag 'omap-for-v3.9/twl-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030
ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led
ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight
ARM: OMAP: sdp3430: Audio support via the common omap-twl4030 machine driver
ARM: OMAP: zoom: Audio support via the common omap-twl4030 machine driver
ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
ARM: OMAP2+: twl-common: Add default twl4030 audio configuration
ARM: OMAP: zoom: Zoom2 does not have extmute functionality
ARM: OMAP: 3430sdp: Enable extmute functionality for audio
dpll_usb needs the clkdm association so the clkdm can be
turned on before a relock. All other dplls for omap4 belong
to the ALWON (always on) domain.
The association was present as part of the older data file
(clock44xx_data.c) but looks like got accidently dropped with
the common clk convertion.
More details of the patch which fixed this up in the older
data file can be dound here..
http://www.spinics.net/lists/linux-omap/msg63076.html
Adding the .clkdm_name as part of the clk_hw_omap struct also
means a new .init needs to be part of the clk_ops for dpll_usb
to initialise the clkdm.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Commit 1416408d {ARM: OMAP2+: PM: share some suspend-related functions
across OMAP2, 3, 4} moved suspend code to common place but now with
that change, for DT build on OMAP4, suspend hooks are not getting
registered which results in no suspend support.
The DT return condition is limited to PMIC and smartreflex
initialization and hence restrict it so that suspend ops gets
registered.
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
am33xx_cm_wait_module_ready() checks if register offset is NULL.
int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
{
int i = 0;
if (!clkctrl_offs)
return 0;
In case of AM33xx, CLKCTRL register offset for different clock domains
are not uniformly placed. An example of this would be the RTC clock
domain with CLKCTRL offset at 0x00.
In such cases the module ready check is skipped which leads to a data
abort during boot-up when RTC registers is accessed.
Remove this check here to avoid checking module readiness for modules
with clkctrl register offset at 0x00.
Koen Kooi notes that this patch fixes a crash on boot with
CONFIG_RTC_DRV_OMAP=y with v3.8-rc5.
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
[paul@pwsan.com: noted Koen's test in the patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
struct omap_hwmod records belonging to wkup m3 domain is missing
HWMOD_NO_IDLEST flags; add them.
This patch is a prerequisite for a subsequent patch, 'ARM: OMAP2:
am33xx-hwmod: Fix "register offset NULL check" bug'. That patch would
otherwise attempt to read from reserved bits.
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
[paul@pwsan.com: add some more explanation in the patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
As part of PWM subsystem integration, PWM subsystem are sharing
resources like clock across submodules (ECAP, EQEP & EHRPWM). To handle
resource sharing & IP integration rework on parent child relation
between PWMSS and ECAP, EQEP & EHRPWM child devices to support runtime PM.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
EQEP IP block integration data is not present in HWMOD data. Also
address ranges specified for EACP & EHRPWM are not correct & HWMOD
flags of ADDR_TYPE_RT are added to PWM subsystem register address
space. This patch:
1. Corrects register address mapping for ECAP & EHRPWM
2. Removes HWMOD flags in PWM submodule register address space.
3. Adds EQEP HWMOD entries.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
[paul@pwsan.com: tweaked patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
WKUP-M3 has a reset status bit (RM_WKUP_STST.WKUP_M3_LRST)
Update the hardreset API to ensure that the reset line properly
deasserted.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
WKUP-M3 has a reset status bit (RM_WKUP_STST.WKUP_M3_LRST)
Update the WKUP-M3 hwmod data to reflect the same.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The current HWMOD code expects the memory region with
the IP's SYSCONFIG register to be marked with ADDR_TYPE_RT
flag.
CPGMAC0 hwmod entry specifies two memory regions and marks
both with the flag ADDR_TYPE_RT although only the 2nd region
has the SYSCONFIG register. This leads to the HWMOD code
accessing the wrong memory address for idle and standby
operations. Fix this by removing the ADDR_TYPE_RT flag from
the 1st memory region in CPGMAC0 hwmod entry.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Third Party Transfer Controller (TPTC0) needs to be idled and
put to standby under SW control. Add the appropriate flags in
the TPTC0 hwmod entry.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
OCMC RAM lies in the PER power domain and this memory
support retention.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This is necessary to ensure that macros declared here can
be reused from assembly files.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
cm33xx.h unnecessarily includes a lot of header files.
Get rid of these and directly include "iomap.h" which
is needed to keep things compiling.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The platform data is used not only by wlcore-based drivers, but also
by wl1251. Move it up in the directory hierarchy to reflect this.
Additionally, make it truly optional. At the moment, disabling
platform data while wl1251_sdio or wlcore_sdio are enabled doesn't
work, but it will be necessary when device tree support is
implemented.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
The LP55xx common driver provides a new header, leds-lp55xx.h.
This driver enables removing duplicate code for both drivers and
making coherent driver structure.
LP5521 and LP5523/55231 platform data were merged into one common file.
Therefore, the LP5521/5523 platform code need to be fixed.
This patch has been already acked.
For ux500: https://lkml.org/lkml/2012/10/11/417
Acked-by: Linus Walleij <linus.walleij@linaro.org>
For omap: https://lkml.org/lkml/2012/10/11/334
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
OMAP4 CHIP level PM works only with newer bootloaders. The
dependency on the bootloader comes from the fact that the
kernel is missing reset and initialization code for some
devices.
While the right thing to do is to add reset and init code in
the kernel, for some co-processor IP blocks like DSP and IVA
it means downloading firmware into each one of them to execute
idle instructions.
While a feasible solution is worked upon on how such IP blocks
can be better handled in the kernel, in the interim, to avoid
any further frustration to users testing PM on OMAP4 and finding
it broken, warn them about the bootloader being a possible
cause.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: R Sricharan <r.sricharan@ti.com>
[paul@pwsan.com: tweaked warning messages and comments slightly]
Acked-by: Kevin Hilman <khilman@linaro.org>
[paul@pwsan.com: fixed checkpatch warning]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
According to Mark Greer, on OMAP AM3517/3505 chips, the EMAC is unable
to wake the ARM up from WFI:
http://www.spinics.net/lists/arm-kernel/msg174734.html
Further troubleshooting was unable to narrow the problem down. So we
don't have much choice other than to block WFI when the EMAC is active
with the HWMOD_BLOCK_WFI flag.
Based on Mark's original patch. We're removing the omap_device-based
pm_lats code, so a different approach was needed.
This third version contains some corrections thanks to Mark's review.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Use the HWMOD_BLOCK_WFI flag in the hwmod data to prevent the MPU from
entering WFI when the I2C devices are active. No idea why this is needed;
this could certainly bear further investigation if anyone is interested.
The objective here is to remove some custom code from the OMAP24xx PM
code.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active. It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
There shouldn't be any need to jump to SRAM code if the OMAP CORE
clockdomain (and consequently the SDRAM controller and CORE PLL) stays
active during MPU WFI. The SRAM code should only be needed when the RAM
enters self-refresh. So in the case where CORE stays active, just call
WFI directly from the mach-omap2/pm24xx.c code. This removes some
unnecessary SRAM code.
This second version replaces the inline WFI with the corresponding
coprocessor register call, using tlbflush.h as an example. This is
because the assembler doesn't recognize WFI as a valid ARMv6
instruction.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 816a65ef4 (ARM: OMAP2+: Limit omap initcalls to omap only on
multiplatform kernels) fixed up things for multiplatform booting
but failed to include soc.h causing a new warning:
arch/arm/mach-omap2/hwspinlock.c:60:1: warning: data definition has no type or storage class
arch/arm/mach-omap2/hwspinlock.c:60:1: warning: type defaults to 'int' in declaration of 'omap_postcore_initcall'
arch/arm/mach-omap2/hwspinlock.c:60:1: warning: parameter names (without types) in function declaration
arch/arm/mach-omap2/hwspinlock.c:31:122: warning: 'hwspinlocks_init' defined but not used
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove some dead OMAP clock and device integration code and data.
Also, clean up the way that the OMAP device integration code blocks
WFI/WFE to use a consistent mechanism, controlled by a data flag.
Several OMAP2+ power management fixes, optimizations, and cleanup.
This series is a prerequisite for the functional powerdomain
conversion series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Rhql
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
From Tony Lindgren:
OMAP PM related updates via Paul Walmsley <paul@pwsan.com>:
Remove some dead OMAP clock and device integration code and data.
Also, clean up the way that the OMAP device integration code blocks
WFI/WFE to use a consistent mechanism, controlled by a data flag.
Several OMAP2+ power management fixes, optimizations, and cleanup.
This series is a prerequisite for the functional powerdomain
conversion series.
* tag 'omap-for-v3.9/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions
ARM: OMAP2xxx: CM: remove autodep handling
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock
ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
ARM: OMAP2: PM/powerdomain: drop unnecessary pwrdm_wait_transition()
ARM: OMAP2xxx: PM: clean up some crufty powerstate programming code
ARM: OMAP2+: clockdomain: add pwrdm_state_switch() call to clkdm_sleep()
ARM: OMAP2+: powerdomain: fix powerdomain trace integration
ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control
ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()
ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
ARM: OMAP3xxx: CPUIdle: simplify the PER next-state code
ARM: OMAP2xxx: powerdomain: core powerdomain missing logic retention states
ARM: OMAP2xxx: clock data: clean up unused null clocks
ARM: OMAP4: clock/hwmod data: remove MODULEMODE entries in mux + gate combos
ARM: OMAP4: clock/hwmod data: start to remove some IP block control "clocks"
ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code
This pull request adds initial support for the Tegra114 SoC, which
integrates a quad-core ARM Cortex-A15 CPU. I'm proud to observe that we
posted the initial versions of these patches before the final official
announcement of this chip.
These patches are enough to boot with a UART-based console, support the
Dalmore and Pluto reference/evaluation boards, instantiate the GPIO and
pinctrl drivers, and enable a cpuidle state. As yet, no clocks or
storage devices are supported, but patches for those will follow shortly.
This pull request is based on (most of) the previous pull request with
tag tegra-for-3.9-soc-cpuidle, followed by a merge of the previous pull
request with tag tegra-for-3.9-scu-base-rework.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bIIe
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.9-soc-t114' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc
From Stepen Warren:
ARM: tegra: add Tegra114 SoC support
This pull request adds initial support for the Tegra114 SoC, which
integrates a quad-core ARM Cortex-A15 CPU. I'm proud to observe that we
posted the initial versions of these patches before the final official
announcement of this chip.
These patches are enough to boot with a UART-based console, support the
Dalmore and Pluto reference/evaluation boards, instantiate the GPIO and
pinctrl drivers, and enable a cpuidle state. As yet, no clocks or
storage devices are supported, but patches for those will follow shortly.
This pull request is based on (most of) the previous pull request with
tag tegra-for-3.9-soc-cpuidle, followed by a merge of the previous pull
request with tag tegra-for-3.9-scu-base-rework.
* tag 'tegra-for-3.9-soc-t114' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (24 commits)
ARM: DT: tegra114: add pinmux DT entry
ARM: DT: tegra114: add GPIO DT entry
ARM: tegra114: select PINCTRL for Tegra114 SoC
ARM: tegra: add Tegra114 ARM_CPUIDLE_WFI_STATE support
ARM: tegra: Add SMMU entry to Tegra114 DT
ARM: tegra: add AHB entry to Tegra114 DT
ARM: tegra: Add initial support for Tegra114 SoC.
ARM: dt: tegra114: Add new board, Pluto
ARM: dt: tegra114: Add new board, Dalmore
ARM: dt: tegra114: Add new SoC base, Tegra114 SoC
ARM: tegra: fuse: Add chip ID Tegra114 0x35
ARM: OMAP: Make use of available scu_a9_get_base() interface
ARM: tegra: Skip scu_enable(scu_base) if not Cortex A9
ARM: Add API to detect SCU base address from CP15
ARM: tegra: Use DT /cpu node to detect number of CPU core
ARM: tegra: Add CPU nodes to Tegra30 device tree
ARM: tegra: Add CPU nodes to Tegra20 device tree
ARM: perf: simplify __hw_perf_event_init err handling
ARM: perf: remove unnecessary checks for idx < 0
ARM: perf: handle armpmu_register failing
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove/add conflict in arch/arm/mach-tegra/common.c resolved.
Remove/remove conflict in arch/arm/mach-tegra/platsmp.c. Leave the empty
stub function for now since removing it in the merge commit is confusing;
will be cleaned up in a separate commit. # # It looks like you may be
committing a merge. # If this is not correct, please remove the file #
.git/MERGE_HEAD # and try again.
With the recent twl related changes we can now get:
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x15f88): Section mismatch in
reference from the function sdp3430_twl_gpio_setup() to the function
.init.text:omap_twl4030_audio_init()
The function sdp3430_twl_gpio_setup() references
the function __init omap_twl4030_audio_init().
This is often because sdp3430_twl_gpio_setup lacks a __init
annotation or the annotation of omap_twl4030_audio_init is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x16968): Section mismatch in
reference from the function zoom_twl_gpio_setup() to the function
.init.text:omap_twl4030_audio_init()
The function zoom_twl_gpio_setup() references
the function __init omap_twl4030_audio_init().
This is often because zoom_twl_gpio_setup lacks a __init
annotation or the annotation of omap_twl4030_audio_init is wrong.
Fix this by removing __init from omap_twl4030_audio_init() as
suggested by Peter Ujfalusi <peter.ujfalusi@ti.com>.
Signed-off-by: Tony Lindgren <tony@atomide.com>
are unused on ARM architecure. Samsung has some code setting up wdog
in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined
nowhere, it will not run. Otherwise, system can not boot at all when
wdog is set up but no one pats it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJQ9WSiAAoJEFBXWFqHsHzOkpYH/iHOomqWknjg0YjeUKmoqnk+
UnAiP/OD0pOuqdC3izSq5rAaxeCn2ESYhXWdHH3LQFNnhwDPOItagY3T1dBgJH0G
KvO3wDj0K1jUM6Nzt4hta4pnCc/KClyCcVjYrP5pE+bs3NzOzxvfj2tPc81lI0Iy
rnkMLWw6gVRllhecUezt3TOd/GfI7NwuyjjBOLelOerbImWFqLOCNIZSRQlazbyS
hFh4OkR7yoU6vEvPdmS4B4A5PWBHlxiUS6Wr4v+doGFPiFgR05tJodLnnJ/KGWmG
LFY99MyeBvcgiUlFcUpiVLYpWJh+7IB1LJH+IGNJbWFYC+Yvn/o9IRYO8kvuiYE=
=weNJ
-----END PGP SIGNATURE-----
Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup
From Shawn Guo:
The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure. Samsung has some code setting up wdog
in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined
nowhere, it will not run. Otherwise, system can not boot at all when
wdog is set up but no one pats it.
* tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: samsung: remove unused arch_decomp_wdog() code
ARM: remove unused arch_decomp_wdog()
ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG
Signed-off-by: Olof Johansson <olof@lixom.net>
the fields must be null-terminated:
the caller may use it as null-terminted string, next.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The IGEPv2 board has two user GPIO LEDs and one of them is
default to "on" to tell the user that the board booted correctly.
But to use these LEDs the config options CONFIG_LEDS_GPIO,
CONFIG_LEDS_TRIGGERS and CONFIG_LEDS_TRIGGER_DEFAULT_ON have to
be enabled.
Since only the default-on and default-off triggers were used
anyway, it is better to just use .default_state instead of
.default_trigger and not depend on CONFIG_LEDS_TRIGGER_*
Also, this is consistent with IGEPv2 Device Tree that uses
default-state instead of linux,default-trigger for the leds
device nodes. The LED names also have been updated to use the
same names used on omap3-igep0020.dtb.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch supports the TPS65910 PMU function on the AM3517 Craneboard.
The IRQ pin, SYS_NIRQ is dedicated connection between the AM3517 and
the TPS65910 PMU.
To handle the PMU IRQs, mux configuration is required.
Platform data configuration:
.IRQ number : SYS_NIRQ (M_IRQ_7)
.External clock source : external 32KHz clock is connected
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch enables the NAND device on the AM3517 Craneboard.
MTD partitions are created as below.
0x000000000000-0x000000080000 : "X-Loader"
0x000000080000-0x000000240000 : "U-Boot"
0x000000240000-0x000000280000 : "U-Boot Env"
0x000000280000-0x000000780000 : "Kernel"
0x000000780000-0x000010000000 : "File System"
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
cm-t3517 uses two MMC interfaces. Add support for both.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for chip id recognition of AM335x PG2.0 silicon. By default
omap3xxx_check_revision() recognizes PG1.0, which is extended by adding
PG2.0 support
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add restart hook so that DTS based AM33xx builds can restart
the platform.
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean-Sebastien A. Beaudry <jsabeaudry@handyem.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 9725f44 (ARM: OMAP: Add DT support for timer driver) added
device-tree support for selecting a clockevent timer by property.
However, the code is currently ignoring the property passed and
selecting the first available timer found. Hence, for the OMAP3 beagle
board timer-12 is not being selected as expected. Fix this problem
by ensuring the timer property is passed to omap_get_timer_dt().
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When applying RT patch on top of Linux, spinlocks are
implemented as RT-mutexes, which means they are preemptable.
Current GIC implementation on OMAP is using a spinlock
to protect against preemption. As it turns out, we need
to convert that lock into a raw_spinlock so that OMAP's
interrupt controller works as expected after RT-patch
is applied.
This patch is simply to decrease the amount of changes
RT-team needs to carry out of tree. It doesn't cause any
changes in behavior.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds device tree bindings for OMAP OneNAND devices.
Tested on an OMAP3 3430 IGEPv2 board.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gpmc_onenand_init() will be called from another driver's probe() function,
so drop the __init annotation, in order to prevent section mismatches.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
If the GPMC probe fails, devices that use the GPMC (such as ethernet
chips, flash memories, etc) can still allocate a GPMC chip-select and
register the device. On the OMAP2420 H4 board, this was causing the
kernel to crash after the gpmc probe failed and the board attempted
to start networking. Prevent this by marking all the chip-selects as
reserved by default and only make them available for devices to request
if the GPMC probe succeeds.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
for_each_node_by_name() automatically calls of_node_put() on each
node passed; so don't do it explicitly unless there's an error.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Both calls are identical currently. This patch prepares to deprecate
read_cpuid on machines without cp15.
Also move an unconditional usage of read_cpuid_cachetype to a more local
scope as read_cpuid_cachetype uses read_cpuid, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: 1359646587-1788-1-git-send-email-u.kleine-koenig@pengutronix.de
LCDC clock node is a one that does not have set rate capability. It
just passes on the rate that is sent downstream by it's parent. While
lcdc clock parent and it's grand parent - dpll_disp_m2_ck and
dpll_disp_ck has the capability to configure rate.
And the default rates provided by LCDC clock's ancestors are not
sufficient to obtain pixel clock for current LCDC use cases, hence
currently display would not work on AM335x SoC's (with driver
modifications in platfrom independent way).
Hence inform clock framework to propogate set rate for LCDC clock as
well as it's parent - dpll_disp_m2_ck. With this change, set rate on
LCDC clock would get propogated till dpll_disp_ck via dpll_disp_m2_ck,
hence allowing the driver (same driver is used in DaVinci too) to set
rates using LCDC clock without worrying about platform dependent clock
details.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
DEFINE_STRUCT_CLK does not have the capability to set flags, define
DEFINE_STRUCT_CLK_FLAGS to handle flags. This is needed to add
SET_RATE_PARENT flag in statically defined lcd clock in am335x.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The core functionality of the arch_timer driver is not directly tied to
anything under arch/arm, and can be split out.
This patch factors out the core of the arch_timer driver, so it can be
shared with other architectures. A couple of functions are added so
that architecture-specific code can interact with the driver without
needing to touch its internals.
The ARM_ARCH_TIMER config variable is moved out to
drivers/clocksource/Kconfig, existing uses in arch/arm are replaced with
HAVE_ARM_ARCH_TIMER, which selects it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
This series is a prerequisite for the functional powerdomain
conversion series.
Basic test logs for this branch are here:
http://www.pwsan.com/omap/testlogs/pm_cleanup_fixes_3.9/20130129150017/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=/cy+
-----END PGP SIGNATURE-----
Merge tag 'omap-cleanup-b-for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.9/pm
Several OMAP2+ power management fixes, optimizations, and cleanup.
This series is a prerequisite for the functional powerdomain
conversion series.
Basic test logs for this branch are here:
http://www.pwsan.com/omap/testlogs/pm_cleanup_fixes_3.9/20130129150017/
* Move sp810 header to a more generic location,
mainly to share it with arm64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRCULAAAoJEL9jRaJfXa5PyysH/AsFbihoAGU0S7o+ggyN4S8m
5myEfbdMvgI5Hjcl/MgcVJAl6jFpDjmBH5ZPu+o8WzoP5L91C9F//kMRZqK0zATj
Y2OdMVNfVQG94bSsmjHryWF8W0RYcY2bQr0wJmgguNDpRLFsFdF3Rb58AWzG+2tP
KFxDg9u/CyhC/sv7BzoKI+J3ol5wEmv4BNMbPyjYG8L5TcBfe/IZqnl6KZ/QAw5i
QUFs3oXtT4/v8bnsxAym+VXIvjSHWs2t0CivfMyH+ZIgb3NbfJ1gIOCOJIk5XWTu
6L1yYyBBcRr60y9p4s2Nd4NxHZEB7pyZYuboUOxSmRNnEM54RT2Nkvcdon8j6Rw=
=uB7w
-----END PGP SIGNATURE-----
Merge tag 'vexpress/drivers-for-3.9' of git://git.linaro.org/people/pawelmoll/linux into next/drivers
From Pawel Moll:
Versatile Express related driver updates for 3.9:
* Move sp810 header to a more generic location,
mainly to share it with arm64
* tag 'vexpress/drivers-for-3.9' of git://git.linaro.org/people/pawelmoll/linux:
arm: Move sp810.h to include/linux/amba/
+ Linux 3.8-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix some whitespace problems introduced by commit
da03ce65b5 ("OMAP3: powerdomain data:
add voltage domains"). Also, improve the documentation for the struct
powerdomain.flags field.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
The atomic usecounts seem to be confusing, and are no longer needed
since the operations that they are attached to really should take
place under lock. Replace the atomic counters with simple integers,
protected by the enclosing powerdomain spinlock.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and
locking versions -- this will be needed in a subsequent patch. Also,
while here, remove the leading underscore, since these are not
currently static functions. And for functions that have
kerneldoc-style comment blocks, but which are missing the initial
'/**' tag, fix the tag to indicate that they are kerneldoc.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
There's no need to preserve the autodep handling code in
mach-omap2/cm2xxx.c, since no autodeps are defined for these chips.
Hopefully they'll never be needed, but if in some future case they are,
this code can be added back in.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add a per-powerdomain spinlock. Use that instead of the clockdomain
spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other
code to acquire or release the powerdomain spinlock without reaching
directly into the struct powerdomain.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jean Pihet <jean.pihet@newoldbits.com>
Move omap_set_pwrdm_state() from the PM code to the powerdomain code,
and refactor it to split it up into several functions. A subsequent patch
will rename it to conform with the existing powerdomain function names.
This version includes some additional documentation, based on a
suggestion from Jean Pihet. It also modifies omap_set_pwrdm_state()
to not bail out early unless both the powerdomain current power state
and the next power state are equal. (Previously it would terminate
early if the next power state was equal to the target power state,
which was insufficiently rigorous.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tero Kristo <t-kristo@ti.com>
Drop an unnecessary pwrdm_wait_transition() from mach-omap2/pm.c -
it's called by the subsequent pwrdm_state_switch().
Also get rid of pwrdm_wait_transition() in the powerdomain code - there's
no longer any need to export this function.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Don't attempt to put clockdomains to sleep; this should be handled by the
clock framework. It should be enough to program the next-power-state,
and then let the code in omap_pm_clkdms_setup() deal with the rest.
Start out by programming the MPU and CORE powerdomains to stay ON.
Then control the MPU and CORE powerdomain states directly in
omap2_enter_full_retention() and omap2_enter_mpu_retention(). Not the
most optimal way to do it, but certainly is the most conservative until
OMAP2xxx PM is working again.
Get rid of the open-coded PM_PWSTCTRL_MPU writes in
omap2_enter_mpu_retention(); use the powerdomain code instead.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
In clkdm_sleep(), the powerdomain should be eligible to switch power
states right after the call to the low-level clockdomain sleep
function. We should have been tracking that with the
pwrdm_state_switch() code, but we weren't, for whatever reason. Fix that.
This resolves the "pwrdm state mismatch(cam_pwrdm) 3 != 0" that appears
during the OMAP4460 Pandaboard-ES PM test, e.g. here:
http://www.pwsan.com/omap/testlogs/test_v3.8-rc5/20130126003323/pm/4460pandaes/4460pandaes_log.txt
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Fix the trace in the case a power domain did not hit the desired
state, as reported by Paul Walmsley.
Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
[paul@pwsan.com: split this fix off from the patch
"ARM: OMAP2+: PM debug: trace the functional power domains states"]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Avoid programming the MPU and CORE powerdomain next-power-state
registers if those powerdomains will never enter low-power states
(e.g., the state that people refer to as "C1").
To avoid making assumptions about CPUIdle states based on their order
in the list, use a flag to mark CPUIdle states that don't enter
powerdomain low-power states.
Avoid a previous-power-state register read on the MPU powerdomain
unless we know that the MPU was supposed to go OFF during the last
state transition. Previous-power-state register reads can be very
expensive, so it's worth avoiding these when possible.
Since the CORE_L3 clockdomain can't go inactive unless the MPU is active,
there's little point blocking autoidle on the CORE_L3 clockdomain in "C1"
state, since we've programmed the MPU clockdomain to stay active.
Remove the unnecessary code.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Drop the define and make use of scu_a9_get_base() which reads
the physical address of SCU from CP15 register.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
