mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 00:51:44 +00:00
45839d0991
204 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
535a265d7f |
perf tools changes for v6.6:
perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees/branches to the
MAINTAINERS file. That is where development now takes place and myself and
Namhyung Kim have write access, more people to come as we emulate other
maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that global variables can
be resolved and used in tools that do data profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c file was passed as
an event: "perf trace -e hello.c" to then get compiled and loaded.
The only known usage for that, that shipped with the kernel as an example for such events,
augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all
the user space components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space type beautifiers changed,
now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall types, as discussed with
Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings,
some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of
nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
#
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for
licensing reasons, and we missed a build test on tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when building with
BUILD_NONDISTRO=1 because a needed initialization routine was being "error
checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it fails.
We better back propagate the error, but at least 'perf annotate' on samples
collected for a BPF program is back working when perf is built with
BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was preventing navigation of
lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file collected
on one architecture to have registers sampled correctly displayed when
analysis tools such as 'perf report' and 'perf script' are used on a different
architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and then read
also via pipe mode with a different version of perf, where the event attr
record may have changed, use the record size field to properly support this
version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the error
message state that instead of stating that some minimal kernel version is
needed to have that feature. This seems just a tool limitation, the kernel
probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the result
of a thread__find_symbol_fb() is not matched with an addr_location__exit()
to drop the reference counts of the resolved components (machine, thread, map,
symbol, etc). Add a dlfilter test to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related to problems
found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when perf is
built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters.
- Add perf record sample filtering test, things like the following example, that gets
implemented as a BPF filter attached to the event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is linked,
using 'perf version --build-options' instead of the more expensinve
'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree, same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler format so that one can use
the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's
Google Summer of Code.
One can generate the output and upload it to the web interface but Anup also automated
everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes with/without
BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra
'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE to error routines,
so that the output can show were the parsing error was found.
- Add 'perf test' entries to check the parsing of events improvements.
- Fix various leak for things detected by -fsanitize=address, mostly things that would
be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in 'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the caller fails
to do all it needs.
- Adjust various compiler options to not consider errors some warnings when
building with broken headers found in things like python, flex, bison, as we
otherwise build with -Werror. Some for gcc, some for clang, some for some
specific version of those, some for some specific version of flex or bison, or
some specific combination of these components, bah.
- Allow customization of clang options for BPF target, this helps building on
gentoo where there are other oddities where BPF targets gets passed some compiler
options intended for the native build, so building with WERROR=0 helps while
these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock',
fixing some segfaults when handling some odd failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs (tools/perf/Documentation).
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo.
- Update scale units and descriptions of common topdown metrics on aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints.
- Update files for the power10 platform.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+
J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr
HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ=
=d12c
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
|
||
Yanteng Si
|
f703073eff |
perf beauty mmap_flags: Use "test -f" instead of "[-f FILE]"
"[" is part of the shell builtin test (and a synonym for it), not a link to the external command /usr/bin/test. Using the "test" is simpler because it avoids a lot of "[]". Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Acked-by: Huacai Chen <chenhuacai@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: loongarch@lists.linux.dev Cc: loongson-kernel@lists.loongnix.cn Link: https://lore.kernel.org/r/c50bc0a92dce0ff0fa6504c1a52fb53e2ac007bf.1692962043.git.siyanteng@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Yanteng Si
|
49cf0bf637 |
perf beauty mmap_flags: Fix script for archs that use the generic mman.h
To address this error: grep: /root/linux-next/tools/arch/xxxxx/include/uapi/asm//mman.h: No such file or directory Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Acked-by: Huacai Chen <chenhuacai@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: loongarch@lists.linux.dev Cc: loongson-kernel@lists.loongnix.cn Link: https://lore.kernel.org/r/42e8e3565d6035302907426c1e65483b2a4007f5.1692962043.git.siyanteng@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ian Rogers
|
cd2cece61a |
perf trace: Tidy comments related to BPF + syscall augmentation
Now tools/perf/examples/bpf/augmented_syscalls.c is tools/perf/util/bpf_skel/augmented_syscalls.bpf.c and not enabled as a BPF event, tidy the comments to reflect this. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Carsten Haitzler <carsten.haitzler@arm.com> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: He Kuang <hekuang@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Wang ShaoBo <bobo.shaobowang@huawei.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Yonghong Song <yhs@fb.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230810184853.2860737-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Xin Li
|
6e3edb0fb5 |
tools: Get rid of IRQ_MOVE_CLEANUP_VECTOR from tools
IRQ_MOVE_CLEANUP_VECTOR is not longer in use. Remove the last traces. Signed-off-by: Xin Li <xin3.li@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230621171248.6805-4-xin3.li@intel.com |
||
Athira Rajeev
|
5e9310ae23 |
perf trace x86_arch_prctl: Address shellcheck warnings about local variables
Running shellcheck on x86_arch_prctl.sh generates below warning:
In ./tools/perf/trace/beauty/x86_arch_prctl.sh line 10:
local idx=$1
^-------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In ./tools/perf/trace/beauty/x86_arch_prctl.sh line 11:
local prefix=$2
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In ./tools/perf/trace/beauty/x86_arch_prctl.sh line 12:
local first_entry=$3
^---------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fix this by removing local since these are variables used only in
specific function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-21-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Kajol Jain
|
f188b2ce65 |
perf beauty arch_errno_names: Fix shellcheck issue about local variables
Running shellcheck on arch_errno_names.sh generates below warning:
In arch_errno_names.sh line 20:
local arch="$1"
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
......
In arch_errno_names.sh line 61:
local arch
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In arch_errno_names.sh line 67:
printf '\t\treturn errno_to_name__%s(err);\n' $(arch_string "$arch")
^--------------------^ SC2046 (warning): Quote this to prevent word splitting.
In arch_errno_names.sh line 69:
printf '\treturn errno_to_name__%s(err);\n' $(arch_string "$default")
^-----------------------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warnings by:
- Fixing shellcheck warnings for local usage, by removing
local from the variable names
- Adding quotes to avoid word splitting
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-15-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Arnaldo Carvalho de Melo
|
0e022f5bf7 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
920b91d927 |
tools include UAPI: Sync linux/mount.h copy with the kernel sources
To pick the changes from:
|
||
|
Linus Torvalds
|
b30d7a77c5 |
perf tools changes and fixes for v6.5: 1st batch
Internal cleanup:
- Refactor PMU data management to handle hybrid systems in a generic way.
Do more work in the lexer so that legacy event types parse more easily.
A side-effect of this is that if a PMU is specified, scanning sysfs is
avoided improving start-up time.
- Fix hybrid metrics, for example, the TopdownL1 works for both performance
and efficiency cores on Intel machines. To support this, sort and regroup
events after parsing.
- Add reference count checking for the 'thread' data structure.
- Lots of fixes for memory leaks in various places thanks to the ASAN and
Ian's refcount checker.
- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.
- Introduce shared_mutex for annotate data to reduce memory footprint.
- Make filesystem access library functions more thread safe.
Test:
- Organize cpu_map tests into a single suite.
- Add metric value validation test to check if the values are within correct
value ranges.
- Add perf stat stdio output test to check if event and metric names match.
- Add perf data converter JSON output test.
- Fix a lot of issues reported by shellcheck(1). This is a preparation to
enable shellcheck by default.
- Make the large x86 new instructions test optional at build time using
EXTRA_TESTS=1.
- Add a test for libpfm4 events.
perf script:
- Add 'dsoff' outpuf field to display offset from the DSO.
$ perf script -F comm,pid,event,ip,dsoff
ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms])
ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms])
ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms])
ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms])
- Adjust width for large PID/TID values.
perf report:
- Robustify reading addr2line output for srcline by checking sentinel output
before the actual data and by using timeout of 1 second.
- Allow config terms (like 'name=ABC') with breakpoint events.
$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1
perf annotate:
- Handle x86 instruction suffix like 'l' in 'movl' generally.
- Parse instruction operands properly even with a whitespace. This is needed
for llvm-objdump output.
- Support RISC-V binutils lookup using the triplet prefixes.
- Add '<' and '>' key to navigate to prev/next symbols in TUI.
- Fix instruction association and parsing for LoongArch.
perf stat:
- Add --per-cache aggregation option, optionally specify a cache level
like `--per-cache=L2`.
$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run
Total time: 7.648 [sec]
Performance counter stats for 'system wide':
S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote
7.779171484 seconds time elapsed
- Change default (no event/metric) formatting for default metrics so that
events are hidden and the metric and group appear.
Performance counter stats for 'ls /':
1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring
- Allow --cputype option to have any PMU name (not just hybrid).
- Fix output value not to added when it runs multiple times with -r option.
perf list:
- Show metricgroup description from JSON file called metricgroups.json.
- Allow 'pfm' argument to list only libpfm4 events and check each event is
supported before showing it.
JSON vendor events:
- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The topdown
events are correctly grouped even if no group exists.
- Add "Default" metric group to print it in the default output. And use
"DefaultMetricgroupName" to indicate the real metric group name.
- Add AmpereOne core PMU events.
Misc:
- Define man page date correctly.
- Track exception level properly on ARM CoreSight ETM.
- Allow anonymous struct, union or enum when retrieving type names from DWARF.
- Fix incorrect filename when calling `perf inject --jit`.
- Handle PLT size correctly on LoongArch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZJxT3gAKCRCMstVUGiXM
g3//AQDyH3tbAVxU6JkvEOjjDvK7MWeXef7GQh8MP8D9Wkxk1AD9HgyxZWXn+mer
wxzBMntnxlr9+mkBerrVwUzYMd/IJQk=
=hPh8
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next
Pull perf tools updates from Namhyung Kim:
"Internal cleanup:
- Refactor PMU data management to handle hybrid systems in a generic
way.
Do more work in the lexer so that legacy event types parse more
easily. A side-effect of this is that if a PMU is specified,
scanning sysfs is avoided improving start-up time.
- Fix hybrid metrics, for example, the TopdownL1 works for both
performance and efficiency cores on Intel machines. To support
this, sort and regroup events after parsing.
- Add reference count checking for the 'thread' data structure.
- Lots of fixes for memory leaks in various places thanks to the ASAN
and Ian's refcount checker.
- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.
- Introduce shared_mutex for annotate data to reduce memory
footprint.
- Make filesystem access library functions more thread safe.
Test:
- Organize cpu_map tests into a single suite.
- Add metric value validation test to check if the values are within
correct value ranges.
- Add perf stat stdio output test to check if event and metric names
match.
- Add perf data converter JSON output test.
- Fix a lot of issues reported by shellcheck(1). This is a
preparation to enable shellcheck by default.
- Make the large x86 new instructions test optional at build time
using EXTRA_TESTS=1.
- Add a test for libpfm4 events.
perf script:
- Add 'dsoff' outpuf field to display offset from the DSO.
$ perf script -F comm,pid,event,ip,dsoff
ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms])
ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms])
ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms])
ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms])
- Adjust width for large PID/TID values.
perf report:
- Robustify reading addr2line output for srcline by checking sentinel
output before the actual data and by using timeout of 1 second.
- Allow config terms (like 'name=ABC') with breakpoint events.
$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1
perf annotate:
- Handle x86 instruction suffix like 'l' in 'movl' generally.
- Parse instruction operands properly even with a whitespace. This is
needed for llvm-objdump output.
- Support RISC-V binutils lookup using the triplet prefixes.
- Add '<' and '>' key to navigate to prev/next symbols in TUI.
- Fix instruction association and parsing for LoongArch.
perf stat:
- Add --per-cache aggregation option, optionally specify a cache
level like `--per-cache=L2`.
$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run
Total time: 7.648 [sec]
Performance counter stats for 'system wide':
S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote
7.779171484 seconds time elapsed
- Change default (no event/metric) formatting for default metrics so
that events are hidden and the metric and group appear.
Performance counter stats for 'ls /':
1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring
- Allow --cputype option to have any PMU name (not just hybrid).
- Fix output value not to added when it runs multiple times with -r
option.
perf list:
- Show metricgroup description from JSON file called
metricgroups.json.
- Allow 'pfm' argument to list only libpfm4 events and check each
event is supported before showing it.
JSON vendor events:
- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
topdown events are correctly grouped even if no group exists.
- Add "Default" metric group to print it in the default output. And
use "DefaultMetricgroupName" to indicate the real metric group
name.
- Add AmpereOne core PMU events.
Misc:
- Define man page date correctly.
- Track exception level properly on ARM CoreSight ETM.
- Allow anonymous struct, union or enum when retrieving type names
from DWARF.
- Fix incorrect filename when calling `perf inject --jit`.
- Handle PLT size correctly on LoongArch"
* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
perf test: Skip metrics w/o event name in stat STD output linter
perf test: Reorder event name checks in stat STD output linter
perf pmu: Remove a hard coded cpu PMU assumption
perf pmus: Add notion of default PMU for JSON events
perf unwind: Fix map reference counts
perf test: Set PERF_EXEC_PATH for script execution
perf script: Initialize buffer for regs_map()
perf tests: Fix test_arm_callgraph_fp variable expansion
perf symbol: Add LoongArch case in get_plt_sizes()
perf test: Remove x permission from lib/stat_output.sh
perf test: Rerun failed metrics with longer workload
perf test: Add skip list for metrics known would fail
perf test: Add metric value validation test
perf jit: Fix incorrect file name in DWARF line table
perf annotate: Fix instruction association and parsing for LoongArch
perf annotation: Switch lock from a mutex to a sharded_mutex
perf sharded_mutex: Introduce sharded_mutex
tools: Fix incorrect calculation of object size by sizeof
perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
perf parse-events: Remove unneeded semicolon
...
|
||
Matthieu Baerts
|
2553a5270d |
perf trace: fix MSG_SPLICE_PAGES build error
Our MPTCP CI and Stephen got this error:
In file included from builtin-trace.c:907:
trace/beauty/msg_flags.c: In function 'syscall_arg__scnprintf_msg_flags':
trace/beauty/msg_flags.c:28:21: error: 'MSG_SPLICE_PAGES' undeclared (first use in this function)
28 | if (flags & MSG_##n) { | ^~~~
trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG'
50 | P_MSG_FLAG(SPLICE_PAGES);
| ^~~~~~~~~~
trace/beauty/msg_flags.c:28:21: note: each undeclared identifier is reported only once for each function it appears in
28 | if (flags & MSG_##n) { | ^~~~
trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG'
50 | P_MSG_FLAG(SPLICE_PAGES);
| ^~~~~~~~~~
The fix is similar to what was done with MSG_FASTOPEN: the new macro is
defined if it is not defined in the system headers.
Fixes:
|
||
David Howells
|
b848b26c66 |
net: Kill MSG_SENDPAGE_NOTLAST
Now that ->sendpage() has been removed, MSG_SENDPAGE_NOTLAST can be cleaned up. Things were converted to use MSG_MORE instead, but the protocol sendpage stubs still convert MSG_SENDPAGE_NOTLAST to MSG_MORE, which is now unnecessary. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-17-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Ian Rogers
|
ee84a3032b |
perf thread: Add accessor functions for thread
Using accessors will make it easier to add reference count checking in later patches. Committer notes: thread->nsinfo wasn't wrapped as it is used together with nsinfo__zput(), where does a trick to set the field with a refcount being dropped to NULL, and that doesn't work well with using thread__nsinfo(thread), that loses the &thread->nsinfo pointer. When refcount checking is added to 'struct thread', later in this series, nsinfo__zput(RC_CHK_ACCESS(thread)->nsinfo) will be used to check the thread pointer. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Brian Robbins <brianrob@linux.microsoft.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Dmitrii Dolgov <9erthalion6@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Ye Xingchen <ye.xingchen@zte.com.cn> Cc: Yuan Can <yuancan@huawei.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230608232823.4027869-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
1fc88e5a2d |
perf trace beauty: Make MSR arrays const to move it to .data.rel.ro
Allows the movement of 46,072 bytes from .data to .data.rel.ro. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20230526183401.2326121-6-irogers@google.com Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ross Zwisler <zwisler@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
29719e3198 |
tools headers UAPI: Sync arch prctl headers with the kernel sources
To pick the changes in this cset: |
||
|
Arnaldo Carvalho de Melo
|
d352588bbc |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:
|
||
Tiezhu Yang
|
818448e9cf |
perf tools: Use "grep -E" instead of "egrep"
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this up by moving the related file to use "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/perf` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1668762999-9297-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
6ac7382099 |
perf trace: Add augmenter for clock_gettime's rqtp timespec arg
One more before going the BTF way:
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o,*nanosleep
? pool-gsd-smart/2893 ... [continued]: clock_nanosleep()) = 0
? gpm/1042 ... [continued]: clock_nanosleep()) = 0
1.232 pool-gsd-smart/2893 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f64d7ffec50) ...
1.232 pool-gsd-smart/2893 ... [continued]: clock_nanosleep()) = 0
327.329 gpm/1042 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffddfd1cf20) ...
1002.482 pool-gsd-smart/2893 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f64d7ffec50) = 0
327.329 gpm/1042 ... [continued]: clock_nanosleep()) = 0
2003.947 pool-gsd-smart/2893 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f64d7ffec50) ...
2003.947 pool-gsd-smart/2893 ... [continued]: clock_nanosleep()) = 0
2327.858 gpm/1042 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffddfd1cf20) ...
? crond/1384 ... [continued]: clock_nanosleep()) = 0
3005.382 pool-gsd-smart/2893 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f64d7ffec50) ...
3005.382 pool-gsd-smart/2893 ... [continued]: clock_nanosleep()) = 0
3675.633 crond/1384 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffcc02b66b0) ...
^C#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
a9cd6c6766 |
perf trace: Add BPF augmenter to perf_event_open()'s 'struct perf_event_attr' arg
Using BPF for that, doing a cleverish reuse of perf_event_attr__fprintf(),
that really needs to be turned into __snprintf(), etc.
But since the plan is to go the BTF way probably use libbpf's
btf_dump__dump_type_data().
Example:
[root@quaco ~]# perf trace -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c,perf_event_open --max-events 10 perf stat --quiet sleep 0.001
fg
0.000 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x1, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
0.067 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x3, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
0.120 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x4, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 5
0.172 perf_event_open(attr_uptr: { type: 1, size: 128, config: 0x2, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 7
0.190 perf_event_open(attr_uptr: { size: 128, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 8
0.199 perf_event_open(attr_uptr: { size: 128, config: 0x1, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 9
0.204 perf_event_open(attr_uptr: { size: 128, config: 0x4, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 10
0.210 perf_event_open(attr_uptr: { size: 128, config: 0x5, sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 258859 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 11
[root@quaco ~]#
Suggested-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Y2V2Tpu+2vzJyon2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
49c75d30b0 |
tools headers uapi: Sync linux/stat.h with the kernel sources
To pick the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
cf1258ac37 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
3713e2494b |
perf trace beauty: Fix generation of errno id->str table on ALT Linux
For some reason using:
cat <<EoFuncBegin
static const char *errno_to_name__$arch(int err)
{
switch (err) {
EoFuncBegin
In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
67e7d77158 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:
|
||
|
Arnaldo Carvalho de Melo
|
9a195da42f |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:
|
||
|
Arnaldo Carvalho de Melo
|
100198322b |
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
This new PR_SET_VMA value isn't in sequence with all the other prctl
arguments and instead uses a big, 0x prefixed hex number: 0x53564d41 (S V M A).
This makes it harder to generate a string table as it would be rather
sparse, so make the regexp more stricter to avoid catching those.
A followup patch for 'perf trace' to cope with such oddities will be
needed, but then its a matter for the next merge window.
The next patch will update the prctl.h file to cope with this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Here is the output of this script:
$ tools/perf/trace/beauty/prctl_option.sh
static const char *prctl_options[] = {
[1] = "SET_PDEATHSIG",
[2] = "GET_PDEATHSIG",
[3] = "GET_DUMPABLE",
[4] = "SET_DUMPABLE",
[5] = "GET_UNALIGN",
[6] = "SET_UNALIGN",
[7] = "GET_KEEPCAPS",
[8] = "SET_KEEPCAPS",
[9] = "GET_FPEMU",
[10] = "SET_FPEMU",
[11] = "GET_FPEXC",
[12] = "SET_FPEXC",
[13] = "GET_TIMING",
[14] = "SET_TIMING",
[15] = "SET_NAME",
[16] = "GET_NAME",
[19] = "GET_ENDIAN",
[20] = "SET_ENDIAN",
[21] = "GET_SECCOMP",
[22] = "SET_SECCOMP",
[23] = "CAPBSET_READ",
[24] = "CAPBSET_DROP",
[25] = "GET_TSC",
[26] = "SET_TSC",
[27] = "GET_SECUREBITS",
[28] = "SET_SECUREBITS",
[29] = "SET_TIMERSLACK",
[30] = "GET_TIMERSLACK",
[31] = "TASK_PERF_EVENTS_DISABLE",
[32] = "TASK_PERF_EVENTS_ENABLE",
[33] = "MCE_KILL",
[34] = "MCE_KILL_GET",
[35] = "SET_MM",
[36] = "SET_CHILD_SUBREAPER",
[37] = "GET_CHILD_SUBREAPER",
[38] = "SET_NO_NEW_PRIVS",
[39] = "GET_NO_NEW_PRIVS",
[40] = "GET_TID_ADDRESS",
[41] = "SET_THP_DISABLE",
[42] = "GET_THP_DISABLE",
[43] = "MPX_ENABLE_MANAGEMENT",
[44] = "MPX_DISABLE_MANAGEMENT",
[45] = "SET_FP_MODE",
[46] = "GET_FP_MODE",
[47] = "CAP_AMBIENT",
[50] = "SVE_SET_VL",
[51] = "SVE_GET_VL",
[52] = "GET_SPECULATION_CTRL",
[53] = "SET_SPECULATION_CTRL",
[54] = "PAC_RESET_KEYS",
[55] = "SET_TAGGED_ADDR_CTRL",
[56] = "GET_TAGGED_ADDR_CTRL",
[57] = "SET_IO_FLUSHER",
[58] = "GET_IO_FLUSHER",
[59] = "SET_SYSCALL_USER_DISPATCH",
[60] = "PAC_SET_ENABLED_KEYS",
[61] = "PAC_GET_ENABLED_KEYS",
[62] = "SCHED_CORE",
};
static const char *prctl_set_mm_options[] = {
[1] = "START_CODE",
[2] = "END_CODE",
[3] = "START_DATA",
[4] = "END_DATA",
[5] = "START_STACK",
[6] = "START_BRK",
[7] = "BRK",
[8] = "ARG_START",
[9] = "ARG_END",
[10] = "ENV_START",
[11] = "ENV_END",
[12] = "AUXV",
[13] = "EXE_FILE",
[14] = "MAP",
[15] = "MAP_SIZE",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin Cross <ccross@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lore.kernel.org/lkml/YflZqY0rYQ3d1bKt@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
66aee54ba4 |
perf beauty: Add socket level scnprintf that handles ARCH specific SOL_SOCKET
SOL_SOCKET has a different value according to the architecture, some have it as 0xffff while all the others have it as 1, so a simple string array isn't usable, add a scnprintf routine that treats it as a special case, using the array for other values. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
ecf0a35ba2 |
perf beauty socket: Add generator for socket level (SOL_*) string table
$ tools/perf/trace/beauty/socket.sh
static const char *socket_ipproto[] = {
[0] = "IP",
[1] = "ICMP",
<SNIP>
[255] = "RAW",
[262] = "MPTCP",
};
static const char *socket_level[] = {
[0] = "IP",
[6] = "TCP",
[17] = "UDP",
[41] = "IPV6",
[58] = "ICMPV6",
[132] = "SCTP",
[136] = "UDPLITE",
[255] = "RAW",
[256] = "IPX",
[257] = "AX25",
[258] = "ATALK",
[259] = "NETROM",
[260] = "ROSE",
[261] = "DECNET",
[262] = "X25",
[263] = "PACKET",
[264] = "ATM",
[265] = "AAL",
[266] = "IRDA",
[267] = "NETBEUI",
[268] = "LLC",
[269] = "DCCP",
[270] = "NETLINK",
[271] = "TIPC",
[272] = "RXRPC",
[273] = "PPPOL2TP",
[274] = "BLUETOOTH",
[275] = "PNPIPE",
[276] = "RDS",
[277] = "IUCV",
[278] = "CAIF",
[279] = "ALG",
[280] = "NFC",
[281] = "KCM",
[282] = "TLS",
[283] = "XDP",
[284] = "MPTCP",
[285] = "MCTP",
};
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
d3f82839f8 |
perf beauty socket: Sort the ipproto array entries
Just tidying up the output for human consumption. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
82e3664b0a |
perf beauty socket: Rename 'regex' to 'ipproto_regex'
Paving the way for more regexps to be used here. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
1a1edf3320 |
perf beauty socket: Prep to receive more input header files
Move from ternary like expression to an if block, this way we'll have just the extra lines for new files in the following patches. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
012e569036 |
perf beauty socket: Rename header_dir to uapi_header_dir
Paving the way to pass more headers to be consumed, like tools/perf/trace/beauty/include/linux/socket.h in addition to the current tools/include/uapi/linux/in.h, to get the SOL_* defines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
795f91db26 |
perf beauty: Rename socket_ipproto.sh to socket.sh to hold more socket table generators
To avoid having to add new entries to tools/perf/Makefile.perf prep socket.sh so that it can generate other socket table generators, such as the upcoming SOL_ socket level one. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
fa020dd78f |
perf beauty: Make all sockaddr files use a common naming scheme
The script that generates the tables was named 'socket.sh', which is confusing, rename it to sockaddr.sh and make sure the related Makefile.perf targets also use the 'sockaddr' namespace. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
6da2a45e15 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
155ed9f1b5 |
perf beauty: Cover more flags in the move_mount syscall argument beautifier
Previously the regext expected MOVE_MOUNT_[FT]_*, but in the next patch a flag that doesn't match that expression will be added, MOVE_MOUNT_SET_GROUP To make this more future proof, take advantage of the fact that the only one we don't need to cover is MOVE_MOUNT__MASK and use MOVE_MOUNT_[^_]+_*_. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
bb91de4469 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in: Fixes: |
||
|
Ian Rogers
|
f463ad7f41 |
perf beauty: Reuse the generic arch errno switch
Previously the code would see if, for example,
tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate
a "generic" switch statement using the asm-generic/errno.h.
This creates multiple identical "generic" switch statements before the
default generic switch statement for an unknown architecture.
By simplifying the archlist to be only for architectures that are not
"generic" the amount of generated code can be reduced from 14 down to 6
functions.
Remove the special case of x86, instead reverse the architecture names
so that it comes first.
Committer testing:
$ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > before
Apply this patch and:
$ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > after
14 arches down to 6, that are the ones with an explicit errno.h file:
$ ls -1 tools/arch/*/include/uapi/asm/errno.h
tools/arch/alpha/include/uapi/asm/errno.h
tools/arch/mips/include/uapi/asm/errno.h
tools/arch/parisc/include/uapi/asm/errno.h
tools/arch/powerpc/include/uapi/asm/errno.h
tools/arch/sparc/include/uapi/asm/errno.h
tools/arch/x86/include/uapi/asm/errno.h
$
$ diff -u4 before after
@@ -2099,32 +987,16 @@
const char *arch_syscalls__strerrno(const char *arch, int err)
{
if (!strcmp(arch, "x86"))
return errno_to_name__x86(err);
- if (!strcmp(arch, "alpha"))
- return errno_to_name__alpha(err);
- if (!strcmp(arch, "arc"))
- return errno_to_name__arc(err);
- if (!strcmp(arch, "arm"))
- return errno_to_name__arm(err);
- if (!strcmp(arch, "arm64"))
- return errno_to_name__arm64(err);
- if (!strcmp(arch, "csky"))
- return errno_to_name__csky(err);
- if (!strcmp(arch, "mips"))
- return errno_to_name__mips(err);
- if (!strcmp(arch, "parisc"))
- return errno_to_name__parisc(err);
- if (!strcmp(arch, "powerpc"))
- return errno_to_name__powerpc(err);
- if (!strcmp(arch, "riscv"))
- return errno_to_name__riscv(err);
- if (!strcmp(arch, "s390"))
- return errno_to_name__s390(err);
- if (!strcmp(arch, "sh"))
- return errno_to_name__sh(err);
if (!strcmp(arch, "sparc"))
return errno_to_name__sparc(err);
- if (!strcmp(arch, "xtensa"))
- return errno_to_name__xtensa(err);
+ if (!strcmp(arch, "powerpc"))
+ return errno_to_name__powerpc(err);
+ if (!strcmp(arch, "parisc"))
+ return errno_to_name__parisc(err);
+ if (!strcmp(arch, "mips"))
+ return errno_to_name__mips(err);
+ if (!strcmp(arch, "alpha"))
+ return errno_to_name__alpha(err);
return errno_to_name__generic(err);
}
The rest of the patch is the removal of the errno_to_name__generic()
unneeded clones.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210513060441.408507-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
ef83f9efe8 |
perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:
|
||
|
Linus Torvalds
|
10a3efd0fe |
perf tools changes for v5.13: 1st batch
perf stat:
- Add support for hybrid PMUs to support systems such as Intel Alderlake
and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP):
commit
|
||
Vitaly Chikunov
|
2e1daee14e |
perf beauty: Fix fsconfig generator
After gnulib update sed stopped matching `[[:space:]]*+' as before,
causing the following compilation error:
In file included from builtin-trace.c:719:
trace/beauty/generated/fsconfig_arrays.c:2:3: error: expected expression before ']' token
2 | [] = "",
| ^
trace/beauty/generated/fsconfig_arrays.c:2:3: error: array index in initializer not of integer type
trace/beauty/generated/fsconfig_arrays.c:2:3: note: (near initialization for 'fsconfig_cmds')
Fix this by correcting the regular expression used in the generator.
Also, clean up the script by removing redundant egrep, xargs, and printf
invocations.
Committer testing:
Continues to work:
$ cat tools/perf/trace/beauty/fsconfig.sh
#!/bin/sh
# SPDX-License-Identifier: LGPL-2.1
if [ $# -ne 1 ] ; then
linux_header_dir=tools/include/uapi/linux
else
linux_header_dir=$1
fi
linux_mount=${linux_header_dir}/mount.h
printf "static const char *fsconfig_cmds[] = {\n"
ms='[[:space:]]*'
sed -nr "s/^${ms}FSCONFIG_([[:alnum:]_]+)${ms}=${ms}([[:digit:]]+)${ms},.*/\t[\2] = \"\1\",/p" \
${linux_mount}
printf "};\n"
$ tools/perf/trace/beauty/fsconfig.sh
static const char *fsconfig_cmds[] = {
[0] = "SET_FLAG",
[1] = "SET_STRING",
[2] = "SET_BINARY",
[3] = "SET_PATH",
[4] = "SET_PATH_EMPTY",
[5] = "SET_FD",
[6] = "CMD_CREATE",
[7] = "CMD_RECONFIGURE",
};
$
Fixes:
|
||
Ingo Molnar
|
4d39c89f0b |
perf tools: Fix various typos in comments
Fix ~124 single-word typos and a few spelling errors in the perf tooling code, accumulated over the years. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210321113734.GA248990@gmail.com Link: http://lore.kernel.org/lkml/20210323160915.GA61903@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Dave Hansen
|
09141ec0e4 |
x86: Remove duplicate TSC DEADLINE MSR definitions
There are two definitions for the TSC deadline MSR in msr-index.h, one with an underscore and one without. Axe one of them and move all the references over to the other one. [ bp: Fixup the MSR define in handle_fastpath_set_msr_irqoff() too. ] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200305174706.0D6B8EE4@viggo.jf.intel.com |
||
|
Arnaldo Carvalho de Melo
|
fde668244d |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
eb2842da77 |
perf trace beauty: Update copy of linux/socket.h with the kernel sources
This just triggers the rebuilding of the syscall beautifiers that
extract patterns from this file due to this cset:
|
||
Namhyung Kim
|
c5e6bc2335 |
perf trace beauty: Allow header files in a different path
Current script to generate mmap flags and prot checks headers from the uapi/asm-generic directory but it might come from a different directory in some environment. So change the pattern to accept it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201023020628.346257-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
388968d864 |
perf trace: Use the autogenerated mmap 'prot' string/id table
No change in behaviour:
# perf trace -e mmap sleep 1
0.000 ( 0.009 ms): sleep/751870 mmap(len: 143317, prot: READ, flags: PRIVATE, fd: 3) = 0x7fa96d0f7000
0.028 ( 0.004 ms): sleep/751870 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7fa96d0f5000
0.037 ( 0.005 ms): sleep/751870 mmap(len: 1872744, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7fa96cf2b000
0.044 ( 0.011 ms): sleep/751870 mmap(addr: 0x7fa96cf50000, len: 1376256, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x25000) = 0x7fa96cf50000
0.056 ( 0.007 ms): sleep/751870 mmap(addr: 0x7fa96d0a0000, len: 307200, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x175000) = 0x7fa96d0a0000
0.064 ( 0.007 ms): sleep/751870 mmap(addr: 0x7fa96d0eb000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bf000) = 0x7fa96d0eb000
0.075 ( 0.005 ms): sleep/751870 mmap(addr: 0x7fa96d0f1000, len: 13160, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7fa96d0f1000
0.253 ( 0.005 ms): sleep/751870 mmap(len: 218049136, prot: READ, flags: PRIVATE, fd: 3) = 0x7fa95ff38000
#
#
# set -o vi
# strace -e mmap sleep 1
mmap(NULL, 143317, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f333bd83000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f333bd81000
mmap(NULL, 1872744, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f333bbb7000
mmap(0x7f333bbdc000, 1376256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f333bbdc000
mmap(0x7f333bd2c000, 307200, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x175000) = 0x7f333bd2c000
mmap(0x7f333bd77000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1bf000) = 0x7f333bd77000
mmap(0x7f333bd7d000, 13160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f333bd7d000
mmap(NULL, 218049136, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f332ebc4000
+++ exited with 0 +++
#
And you can as well tweak 'perf trace's output to more closely match
strace's:
# perf config trace.show_arg_names=no
# perf config trace.show_duration=no
# perf config trace.show_prefix=yes
# perf config trace.show_timestamp=no
# perf config trace.show_zeros=yes
# perf config trace.no_inherit=yes
# perf trace -e mmap sleep 1
mmap(NULL, 143317, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0d287ca000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f0d287c8000
mmap(NULL, 1872744, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0d285fe000
mmap(0x7f0d28623000, 1376256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f0d28623000
mmap(0x7f0d28773000, 307200, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x175000) = 0x7f0d28773000
mmap(0x7f0d287be000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1bf000) = 0x7f0d287be000
mmap(0x7f0d287c4000, 13160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f0d287c4000
mmap(NULL, 218049136, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0d1b60b000
#
# perf config | grep ^trace
trace.show_arg_names=no
trace.show_duration=no
trace.show_prefix=yes
trace.show_timestamp=no
trace.show_zeros=yes
trace.no_inherit=yes
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
08fc476214 |
tools beauty: Add script to generate table of mmap's 'prot' argument
Will be wired up in the following csets:
$ tools/perf/trace/beauty/mmap_prot.sh
static const char *mmap_prot[] = {
[ilog2(0x1) + 1] = "READ",
#ifndef PROT_READ
#define PROT_READ 0x1
#endif
[ilog2(0x2) + 1] = "WRITE",
#ifndef PROT_WRITE
#define PROT_WRITE 0x2
#endif
[ilog2(0x4) + 1] = "EXEC",
#ifndef PROT_EXEC
#define PROT_EXEC 0x4
#endif
[ilog2(0x8) + 1] = "SEM",
#ifndef PROT_SEM
#define PROT_SEM 0x8
#endif
[ilog2(0x01000000) + 1] = "GROWSDOWN",
#ifndef PROT_GROWSDOWN
#define PROT_GROWSDOWN 0x01000000
#endif
[ilog2(0x02000000) + 1] = "GROWSUP",
#ifndef PROT_GROWSUP
#define PROT_GROWSUP 0x02000000
#endif
};
$
$
$
$ tools/perf/trace/beauty/mmap_prot.sh alpha
static const char *mmap_prot[] = {
[ilog2(0x4) + 1] = "EXEC",
#ifndef PROT_EXEC
#define PROT_EXEC 0x4
#endif
[ilog2(0x01000000) + 1] = "GROWSDOWN",
#ifndef PROT_GROWSDOWN
#define PROT_GROWSDOWN 0x01000000
#endif
[ilog2(0x02000000) + 1] = "GROWSUP",
#ifndef PROT_GROWSUP
#define PROT_GROWSUP 0x02000000
#endif
[ilog2(0x1) + 1] = "READ",
#ifndef PROT_READ
#define PROT_READ 0x1
#endif
[ilog2(0x8) + 1] = "SEM",
#ifndef PROT_SEM
#define PROT_SEM 0x8
#endif
[ilog2(0x2) + 1] = "WRITE",
#ifndef PROT_WRITE
#define PROT_WRITE 0x2
#endif
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
61693228b6 |
perf beauty mmap_flags: Conditionaly define the mmap flags
So that in older systems we get it in the mmap flags scnprintf routines:
$ tools/perf/trace/beauty/mmap_flags.sh | head -9 2> /dev/null
static const char *mmap_flags[] = {
[ilog2(0x40) + 1] = "32BIT",
#ifndef MAP_32BIT
#define MAP_32BIT 0x40
#endif
[ilog2(0x01) + 1] = "SHARED",
#ifndef MAP_SHARED
#define MAP_SHARED 0x01
#endif
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
9012e3dda2 |
perf trace beauty: Add script to autogenerate mremap's flags args string/id table
It'll also conditionally generate the defines, so that if we don't have
those when building a new tool tarball in an older systems, we get
those, and we need them sometimes in the actual scnprintf routine, such
as when checking if a flags means we have an extra arg, like with
MREMAP_FIXED.
$ tools/perf/trace/beauty/mremap_flags.sh
static const char *mremap_flags[] = {
[ilog2(1) + 1] = "MAYMOVE",
#ifndef MREMAP_MAYMOVE
#define MREMAP_MAYMOVE 1
#endif
[ilog2(2) + 1] = "FIXED",
#ifndef MREMAP_FIXED
#define MREMAP_FIXED 2
#endif
[ilog2(4) + 1] = "DONTUNMAP",
#ifndef MREMAP_DONTUNMAP
#define MREMAP_DONTUNMAP 4
#endif
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
f3cf7fa963 |
perf trace beauty: Use the autogenerated protocol family table
That helps us not to lose new protocol families when they are
introduced, replacing that hardcoded, dated family->string table.
To recap what this allows us to do:
# perf trace -e syscalls:sys_enter_socket/max-stack=10/ --filter=family==INET --max-events=1
0.000 fetchmail/41097 syscalls:sys_enter_socket(family: INET, type: DGRAM|CLOEXEC|NONBLOCK, protocol: IP)
__GI___socket (inlined)
reopen (/usr/lib64/libresolv-2.31.so)
send_dg (/usr/lib64/libresolv-2.31.so)
__res_context_send (/usr/lib64/libresolv-2.31.so)
__GI___res_context_query (inlined)
__GI___res_context_search (inlined)
_nss_dns_gethostbyname4_r (/usr/lib64/libnss_dns-2.31.so)
gaih_inet.constprop.0 (/usr/lib64/libc-2.31.so)
__GI_getaddrinfo (inlined)
[0x15cb2] (/usr/bin/fetchmail)
#
More work is still needed to allow for the more natura strace-like
syscall name usage instead of the trace event name:
# perf trace -e socket/max-stack=10,family==INET/ --max-events=1
I.e. to allow for modifiers to follow the syscall name and for logical
expressions to be accepted as filters to use with that syscall, be it as
trace event filters or BPF based ones.
Using -v we can see how the trace event filter is built:
# perf trace -v -e syscalls:sys_enter_socket/call-graph=dwarf/ --filter=family==INET --max-events=2
<SNIP>
New filter for syscalls:sys_enter_socket: (family==0x2) && (common_pid != 41384 && common_pid != 2836)
<SNIP>
$ tools/perf/trace/beauty/socket.sh | grep -w 2
[2] = "INET",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|