Commit Graph

50 Commits

Author SHA1 Message Date
Alexandre Belloni
5434a4e472 rtc: pcf2123: use IRQ flags obtained from fwnode
Allow the IRQ type to be passed from the device tree if available as there
may be components changing the trigger type of the interrupt between the
RTC and the IRQ controller.

Link: https://lore.kernel.org/r/20230123200217.1236011-5-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-01 09:13:35 +01:00
Alexandre Belloni
c7e91f7c1b rtc: pcf2123: set RTC_FEATURE_ALARM_RES_MINUTE
Alarms have a resolution of a minute.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-9-alexandre.belloni@bootlin.com
2022-03-23 19:58:39 +01:00
Alexandre Belloni
fff36f7968 rtc: pcf2123: switch to RTC_FEATURE_UPDATE_INTERRUPT
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-8-alexandre.belloni@bootlin.com
2022-03-23 19:58:39 +01:00
Mark Brown
5f84478e14 rtc: pcf2123: Add SPI ID table
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210923194922.53386-4-broonie@kernel.org
2021-09-25 23:22:28 +02:00
Alexandre Belloni
a82430fd2d rtc: pcf2123: use rtc_lock/rtc_unlock
Avoid accessing directly rtc->ops_lock and use the RTC core helpers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210119220653.677750-10-alexandre.belloni@bootlin.com
2021-01-25 23:46:17 +01:00
Bartosz Golaszewski
fdcfd85433 rtc: rework rtc_register_device() resource management
rtc_register_device() is a managed interface but it doesn't use devres
by itself - instead it marks an rtc_device as "registered" and the devres
callback for devm_rtc_allocate_device() takes care of resource release.

This doesn't correspond with the design behind devres where managed
structures should not be aware of being managed. The correct solution
here is to register a separate devres callback for unregistering the
device.

While at it: rename rtc_register_device() to devm_rtc_register_device()
and add it to the list of managed interfaces in devres.rst. This way we
can avoid any potential confusion of driver developers who may expect
there to exist a corresponding unregister function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2020-11-19 12:50:12 +01:00
Alexandre Belloni
cb36cf803f rtc: pcf2123: add proper compatible string
nxp,rtc-pcf2123 is not a proper compatible strong for this RTC. The part
name is only pcf2123 and is less confusing.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-9-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:19 +02:00
Alexandre Belloni
d5b626e135 rtc: pcf2123: let the core handle range offsetting
Set the RTC range properly and use the core windowing and offsetting to
(unfortunately) map back to a 1970-2069 range.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-8-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:17 +02:00
Alexandre Belloni
935a7f4597 rtc: pcf2123: convert to devm_rtc_allocate_device
This allows further improvement of the driver. Also remove the unecessary
error string as the core will already display error messages.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-7-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:15 +02:00
Alexandre Belloni
9a5aeaad73 rtc: pcf2123: remove useless error path goto
kfree_exit only returns ret, remove it. This also fixes the
devm_regmap_init_spi error case where the probe wouldn't actually fail
because ret is initialized to 0.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-6-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:13 +02:00
Alexandre Belloni
9126a2b16b rtc: pcf2123: rename struct and variables
Rename struct pcf2123_plat_data to struct pcf2123_data and pdata to
pcf2123 to make the driver use a more common subsystem style.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-5-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:12 +02:00
Alexandre Belloni
d3bad6026f rtc: pcf2123: stop using dev.platform_data
platform_data is for platform specific data, use driver_data instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-4-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:09 +02:00
Alexandre Belloni
577f648207 rtc: pcf2123: implement .alarm_irq_enable
Implement .alarm_irq_enable so it is possible to use RTC_ALM_SET,
RTC_AIE_ON and RTC_AIE_OFF.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:07 +02:00
Alexandre Belloni
d0ce6ef714 rtc; pcf2123: fix possible alarm race condition
Clear the flag after disabling the alarm to ensure the alarm doesn't fire
between clearing the flag and disabling the alarm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:05 +02:00
Alexandre Belloni
5bdf40dab6 rtc: pcf2123: don't use weekday alarm
The week day may not be set properly by userspace. This would result is
missed alarms. Disable alarm matching on weekday.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190819182656.29744-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-20 21:42:03 +02:00
Linus Torvalds
edafb6fe42 RTC for 5.3
Drivers:
  - ds1307: properly handle oscillator failure flags
  - imx-sc: alarm support
  - pcf2123: alarm support, correct offset handling
  - sun6i: add R40 support
  - simplify getting the adapter of an i2c client
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl0tl5UACgkQ2wIijOdR
 NOVMig/8C7o1tBpm1Kfs3GYjZ5o2SI7m6425OypONOa9U2rFVnFHxVogtIHTC7wa
 SXVFdV+L/MT/xHEbQ3Mfv36cRB0h3Q89NqcVWFkjSGvoqliTIA2F2zsLDHYLDyEO
 AdOc8ztzrTCmlPjrg7d64qxA/l/dPChIhDW1nsMTJY7EXO0lBywcEP0KQsnOrjzD
 lNDskhLuYaL0h1OL2KSrx/81ZZW1MXEyTU5nl4e2JowVYFB0f75P7h79MChmjM35
 wE5WVDH8LqhYHOoVR9fW5sjRpNgdKfFsH8Sh5DGVU3jLGA72v0Eo/c1BHHegumoI
 6X+09nv9D3j4l2z5on5TzXMhvwuLdZQ2VRBdpI1XcVjtYA18UTIXZA8wDRgLTb3b
 MZE31s1WM0vxSiGyaL+hfI9APfX0xSd+BIqVvxhUVPvCGCwWvfLJgQfmlsW4eWOk
 LdmifkLb0Mjf+ym+WH8GvXND+ZeNJ9eUUwVZkGHPhb6SfkLiEAnw3f1czOT1fLDR
 q6i0hG9/+BsiwZMCJt86rDZd1D51FjkNzUH1d///iURvaDhoi41nKaFR45kc5Foc
 WVmnWDWw1yg7K6kUQ3kXsyBkbw0jhdCXGN539rrvbElyL5e5XDUo+3gAEi25CkVe
 DCpxICWO+jvOrjJBHdH3T3HJDa7NbFXWkXOwLXe5M42q7rrgZwY=
 =aJ54
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A quiet cycle this time.

   - ds1307: properly handle oscillator failure flags

   - imx-sc: alarm support

   - pcf2123: alarm support, correct offset handling

   - sun6i: add R40 support

   - simplify getting the adapter of an i2c client"

* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
  rtc: wm831x: Add IRQF_ONESHOT flag
  rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
  rtc: pcf2123: Fix build error
  rtc: interface: Change type of 'count' from int to u64
  rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
  rtc: pcf8563: Fix interrupt trigger method
  rtc: pcf2123: fix negative offset rounding
  rtc: pcf2123: add alarm support
  rtc: pcf2123: use %ptR
  rtc: pcf2123: port to regmap
  rtc: pcf2123: remove sysfs register view
  rtc: rx8025: simplify getting the adapter of a client
  rtc: rx8010: simplify getting the adapter of a client
  rtc: rv8803: simplify getting the adapter of a client
  rtc: m41t80: simplify getting the adapter of a client
  rtc: fm3130: simplify getting the adapter of a client
  rtc: tegra: Drop MODULE_ALIAS
  rtc: sun6i: Add R40 compatible
  dt-bindings: rtc: sun6i: Add the R40 RTC compatible
  dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
  ...
2019-07-17 10:03:50 -07:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Alexandre Belloni
fedc459a3d rtc: pcf2123: fix negative offset rounding
Using result = (value + divisor/2) / divisor is rounding values up and only
works well for positive values. Instead use DIV_ROUND_CLOSEST which does
the correct thing.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19 16:20:31 +02:00
Dylan Howey
e32e60a2d5 rtc: pcf2123: add alarm support
Allows alarm to be controlled using, e.g., the RTC_WKALM_SET ioctl.

Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19 16:20:28 +02:00
Dylan Howey
c33850bbc6 rtc: pcf2123: use %ptR
Use %ptR to print date in human readable format.

Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19 16:20:25 +02:00
Dylan Howey
790d033933 rtc: pcf2123: port to regmap
Also remove pcf2123_delay_trec. This claimed to add a 30ns delay to SPI
writes, but I could not see any reference to this requirement in the
datasheet. Closest thing I could find to a requirement are timings for the
SPI chip enable line, which cannot be controlled by this driver (the ndelay
came after the call to spi_write_then_read, which means it would sleep
after CE has already gone inactive). Things seem to work fine without it.

Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19 16:20:22 +02:00
Dylan Howey
2372a7d32b rtc: pcf2123: remove sysfs register view
Use regmap debugfs register view instead.

Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19 16:20:19 +02:00
Alexandre Belloni
3c3d71013c rtc: pcf2123: Add Microcrystal rv2123
Add a compatible string for Microcrystal rv2123 as the reset procedure seem
to be differing. However, the current driver works just fine.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-18 22:53:35 +01:00
Alexandre Belloni
22652ba724 rtc: stop validating rtc_time in .read_time
The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02 10:09:58 +01:00
Christophe JAILLET
83ab7dad06 rtc: pcf2123: Add missing error code assignment before test
It is likely that checking the result of 'pcf2123_write_reg' is expected
here.
Also fix a small style issue. The '{' at the beginning of the function
is misplaced.

Fixes: 809b453b76 ("rtc: pcf2123: clean up writes to the rtc chip")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Martin Kepplinger
82df3e045d rtc: pcf2123: use sign_extend32() for sign extension
Use sign_extend32() instead of open coding sign extension.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04 15:50:44 +02:00
Alexandre Belloni
fa5691131a rtc: remove useless DRV_VERSION
Many drivers are defining a DRV_VERSION. This is often only used for
MODULE_VERSION and sometimes to print an info message at probe time. This
is kind of pointless as they are all versionned with the kernel anyway.
Also the core will print a message when a new rtc is found.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-20 12:33:51 +02:00
Joshua Clayton
bae2f64702 rtc: pcf2123: implement read_offset and set_offset
pcf2123 has an offset register, which can be used to make minor
adjustments to the clock rate to compensate for temperature or
a crystal that is not exactly right.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:16 +01:00
Joshua Clayton
f07fa9242e rtc: pcf2123: avoid resetting the clock if possible
pcf2123 data sheet recommends a software reset when the chip
is first powered on. This change avoids resetting the chip
every time the driver is loaded, which has some negative effects.

There are several registers including a clock rate adjustment that really
should survive a reload of the driver (or reboot).

In addition, stopping and restarting the clock to verify the chip is
there is not a good thing once the time is set.

According to the data sheet, the seconds register has a 1 in
the high bit when the voltage has gotten low. We check for this
condition, as well as whether the time retrieved from the chip is
valid. We reset the rtc only if the time is not reliable and valid.
This is sufficient for checking for the presence of the chip,
as either all zeros or all 0xff will result in an invalid time/date

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:04 +01:00
Joshua Clayton
1e094b946c rtc: pcf2123: refactor chip reset into a function
Refactor chip reset items into its own function, isolating it from
the rest of the device probe.
Subsequent commits will avoid calling this code.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:07:58 +01:00
Joshua Clayton
809b453b76 rtc: pcf2123: clean up writes to the rtc chip
Add new functions pcf2123_write(), and pcf2123_write_reg().
Use named defines for the values being written.

This improves modularity and readability, and reduces lines of code.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:07:53 +01:00
Joshua Clayton
66c056d6a1 rtc: pcf2123: clean up reads from the chip
Put read operations into a function.
This improves modularity and readability.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:07:48 +01:00
Joshua Clayton
245cb74be6 rtc: pcf2123: define registers and bit macros
Add defines for all 16 registers in the pcf2123.
Add defines for useful bits from several registers
I've tried to document all the registers, and
as best as possible, all the special bits they employ

Use BIT() wherever possible in the bit definitions

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:07:40 +01:00
Andrew F. Davis
3821a065f5 spi: Drop owner assignment from spi_drivers
An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 10:30:17 +09:00
Andrea Scian
821f51c4da rtc: use rtc_valid_tm() error code when reading date/time
There's a wrong comment in some RTC drivers that say it's better to ignore
rtc_valid_tm() when reading RTC timestamp. However this is wrong and is
better to return to the userspace the error if timestamp is not valid.

Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:06 +02:00
Joshua Clayton
3fc70077e6 drivers/rtc/rtc-pcf2123.c: add support for devicetree
Add compatible string "nxp,rtc-pcf2123"
Document the binding

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:42 -08:00
Jingoo Han
ffc75bb8f2 drivers/rtc/rtc-pcf2123.c: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:29 +09:00
Jingoo Han
4c5591c1ee drivers/rtc/rtc-pcf2123.c: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete.  Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:00 -07:00
Sachin Kamat
369015fbd4 drivers/rtc/rtc-pcf2123.c: remove space before tabs
Silences the following checkpatch warning:

  WARNING: please, no space before tabs

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:48 -07:00
Wei Yongjun
3562371581 drivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()
Fix to return -ENODEV in the chip not found error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:40 -07:00
Jingoo Han
dd48ccc491 rtc: rtc-pcf2123: use devm_*() functions
Use devm_*() functions to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:38 -07:00
Greg Kroah-Hartman
5a167f4543 Drivers: rtc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:02 -08:00
Ilya Shchepetkov
5ed12f1282 drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributes
Dynamically allocated sysfs attributes must be initialized using
sysfs_attr_init(), otherwise lockdep complains: BUG: key <address> not in
.data!

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Ilya Shchepetkov <shchepetkov@ispras.ru>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-21 16:45:03 -07:00
Axel Lin
109e941843 rtc: convert rtc spi drivers to module_spi_driver
Factor out some boilerplate code for spi driver registration into
module_spi_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Mark Jackson <mpfj@mimc.co.uk>
Cc: Dennis Aberilla <denzzzhome@yahoo.com>
Cc: Nikolaus Voss <n.voss@weinmann.de>
Cc: "Kim B. Heino" <Kim.Heino@bluegiga.com>
Cc: Raphael Assenat <raph@raphnet.net>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:39 -07:00
Lars-Peter Clausen
6c3fb55793 drivers/rtc/: remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of
an spi_driver to spi_bus_type.  These days this is done in
spi_driver_register(), so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:53 -08:00
Paul Gortmaker
2113852b23 rtc: Add module.h to implicit users in drivers/rtc
The module.h was implicitly everywhere, but when we clean
that up, the implicit users will compile fail; fix them up
in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:28 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Uwe Kleine-König
b51e829318 rtc-pcf2123: move pcf2123_remove to .devexit.text
The function pcf2123_remove is used only wrapped by __devexit_p so define
it using __devexit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:47 -08:00
Chris Verges
f3d2570a14 rtc-philips-pcf2123-rtc-spi-driver-updates
Signed-off: Chris Verges <chrisv@cyberswitching.com>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:45 -07:00
Chris Verges
7f3923a184 rtc: Philips PCF2123 RTC SPI driver
Add support for the Philips/NXP PCF2123 RTC.

Signed-off: Chris Verges <chrisv@cyberswitching.com>
Tested-by: Chris Verges <chrisv@cyberswitching.com>
Signed-off: Christian Pellegrin <chripell@fsfe.org>
Tested-by: Christian Pellegrin <chripell@fsfe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:44 -07:00