Commit Graph

145 Commits

Author SHA1 Message Date
Anshuman Khandual
399145f9eb mm/debug: add tests validating architecture page table helpers
This adds tests which will validate architecture page table helpers and
other accessors in their compliance with expected generic MM semantics.
This will help various architectures in validating changes to existing
page table helpers or addition of new ones.

This test covers basic page table entry transformations including but not
limited to old, young, dirty, clean, write, write protect etc at various
level along with populating intermediate entries with next page table page
and validating them.

Test page table pages are allocated from system memory with required size
and alignments.  The mapped pfns at page table levels are derived from a
real pfn representing a valid kernel text symbol.  This test gets called
via late_initcall().

This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected.
Any architecture, which is willing to subscribe this test will need to
select ARCH_HAS_DEBUG_VM_PGTABLE.  For now this is limited to arc, arm64,
x86, s390 and powerpc platforms where the test is known to build and run
successfully Going forward, other architectures too can subscribe the test
after fixing any build or runtime problems with their page table helpers.

Folks interested in making sure that a given platform's page table helpers
conform to expected generic MM semantics should enable the above config
which will just trigger this test during boot.  Any non conformity here
will be reported as an warning which would need to be fixed.  This test
will help catch any changes to the agreed upon semantics expected from
generic MM and enable platforms to accommodate it thereafter.

[anshuman.khandual@arm.com: v17]
  Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com
[anshuman.khandual@arm.com: v18]
  Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>	[s390]
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>	[ppc32]
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:21 -07:00
Alexander Duyck
36e66c554b mm: introduce Reported pages
In order to pave the way for free page reporting in virtualized
environments we will need a way to get pages out of the free lists and
identify those pages after they have been returned.  To accomplish this,
this patch adds the concept of a Reported Buddy, which is essentially
meant to just be the Uptodate flag used in conjunction with the Buddy page
type.

To prevent the reported pages from leaking outside of the buddy lists I
added a check to clear the PageReported bit in the del_page_from_free_list
function.  As a result any reported page that is split, merged, or
allocated will have the flag cleared prior to the PageBuddy value being
cleared.

The process for reporting pages is fairly simple.  Once we free a page
that meets the minimum order for page reporting we will schedule a worker
thread to start 2s or more in the future.  That worker thread will begin
working from the lowest supported page reporting order up to MAX_ORDER - 1
pulling unreported pages from the free list and storing them in the
scatterlist.

When processing each individual free list it is necessary for the worker
thread to release the zone lock when it needs to stop and report the full
scatterlist of pages.  To reduce the work of the next iteration the worker
thread will rotate the free list so that the first unreported page in the
free list becomes the first entry in the list.

It will then call a reporting function providing information on how many
entries are in the scatterlist.  Once the function completes it will
return the pages to the free area from which they were allocated and start
over pulling more pages from the free areas until there are no longer
enough pages to report on to keep the worker busy, or we have processed as
many pages as were contained in the free area when we started processing
the list.

The worker thread will work in a round-robin fashion making its way though
each zone requesting reporting, and through each reportable free list
within that zone.  Once all free areas within the zone have been processed
it will check to see if there have been any requests for reporting while
it was processing.  If so it will reschedule the worker thread to start up
again in roughly 2s and exit.

Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Cc: wei qi <weiqi4@huawei.com>
Link: http://lkml.kernel.org/r/20200211224635.29318.19750.stgit@localhost.localdomain
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:43:38 -07:00
Qian Cai
5f2d5026be mm/Makefile: disable KCSAN for kmemleak
Kmemleak could scan task stacks while plain writes happens to those stack
variables which could results in data races.  For example, in
sys_rt_sigaction and do_sigaction(), it could have plain writes in a
32-byte size.  Since the kmemleak does not care about the actual values of
a non-pointer and all do_sigaction() call sites only copy to stack
variables, just disable KCSAN for kmemleak to avoid annotating anything
outside Kmemleak just because Kmemleak scans everything.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/1583263716-25150-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:26 -07:00
Steven Price
30d621f672 mm: add generic ptdump
Add a generic version of page table dumping that architectures can opt-in
to.

Link: http://lkml.kernel.org/r/20191218162402.45610-20-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:25 +00:00
Dmitry Vyukov
43e76af85f kcov: ignore fault-inject and stacktrace
Don't instrument 3 more files that contain debugging facilities and
produce large amounts of uninteresting coverage for every syscall.

The following snippets are sprinkled all over the place in kcov traces
in a debugging kernel.  We already try to disable instrumentation of
stack unwinding code and of most debug facilities.  I guess we did not
use fault-inject.c at the time, and stacktrace.c was somehow missed (or
something has changed in kernel/configs).  This change both speeds up
kcov (kernel doesn't need to store these PCs, user-space doesn't need to
process them) and frees trace buffer capacity for more useful coverage.

  should_fail
  lib/fault-inject.c:149
  fail_dump
  lib/fault-inject.c:45

  stack_trace_save
  kernel/stacktrace.c:124
  stack_trace_consume_entry
  kernel/stacktrace.c:86
  stack_trace_consume_entry
  kernel/stacktrace.c:89
  ... a hundred frames skipped ...
  stack_trace_consume_entry
  kernel/stacktrace.c:93
  stack_trace_consume_entry
  kernel/stacktrace.c:86

Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:41 -08:00
Thomas Hellstrom
c5acad84cf mm: Add write-protect and clean utilities for address space ranges
Add two utilities to 1) write-protect and 2) clean all ptes pointing into
a range of an address space.
The utilities are intended to aid in tracking dirty pages (either
driver-allocated system memory or pci device memory).
The write-protect utility should be used in conjunction with
page_mkwrite() and pfn_mkwrite() to trigger write page-faults on page
accesses. Typically one would want to use this on sparse accesses into
large memory regions. The clean utility should be used to utilize
hardware dirtying functionality and avoid the overhead of page-faults,
typically on large accesses into small memory regions.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2019-11-06 13:03:36 +01:00
Qian Cai
b57a775f51 mm: silence -Woverride-init/initializer-overrides
When compiling a kernel with W=1, there are several of those warnings due
to arm64 overriding a field on purpose.  Just disable those warnings for
both GCC and Clang of this file, so it will help dig "gems" hidden in the
W=1 warnings by reducing some noises.

mm/init-mm.c:39:2: warning: initializer overrides prior initialization
of this subobject [-Winitializer-overrides]
        INIT_MM_CONTEXT(init_mm)
        ^~~~~~~~~~~~~~~~~~~~~~~~
./arch/arm64/include/asm/mmu.h:133:9: note: expanded from macro
'INIT_MM_CONTEXT'
        .pgd = init_pg_dir,
               ^~~~~~~~~~~
mm/init-mm.c:30:10: note: previous initialization is here
        .pgd            = swapper_pg_dir,
                          ^~~~~~~~~~~~~~

Note: there is a side project trying to support explicitly allowing
specific initializer overrides in Clang, but there is no guarantee it
will happen or not.

https://github.com/ClangBuiltLinux/linux/issues/639

Link: http://lkml.kernel.org/r/1566920867-27453-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:10 -07:00
Nicholas Piggin
13224794cb mm: remove quicklist page table caches
Patch series "mm: remove quicklist page table caches".

A while ago Nicholas proposed to remove quicklist page table caches [1].

I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.

[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com

This patch (of 3):

Remove page table allocator "quicklists".  These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.

The numbers in the initial commit look interesting but probably don't
apply anymore.  If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.

Also it might be better to instead make more general improvements to page
allocator if this is still so slow.

Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Christoph Hellwig
14c5cebad5 memremap: move from kernel/ to mm/
memremap.c implements MM functionality for ZONE_DEVICE, so it really
should be in the mm/ directory, not the kernel/ one.

Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:01 -07:00
Linus Torvalds
fec88ab0af HMM patches for 5.3
Improvements and bug fixes for the hmm interface in the kernel:
 
 - Improve clarity, locking and APIs related to the 'hmm mirror' feature
   merged last cycle. In linux-next we now see AMDGPU and nouveau to be
   using this API.
 
 - Remove old or transitional hmm APIs. These are hold overs from the past
   with no users, or APIs that existed only to manage cross tree conflicts.
   There are still a few more of these cleanups that didn't make the merge
   window cut off.
 
 - Improve some core mm APIs:
   * export alloc_pages_vma() for driver use
   * refactor into devm_request_free_mem_region() to manage
     DEVICE_PRIVATE resource reservations
   * refactor duplicative driver code into the core dev_pagemap
     struct
 
 - Remove hmm wrappers of improved core mm APIs, instead have drivers use
   the simplified API directly
 
 - Remove DEVICE_PUBLIC
 
 - Simplify the kconfig flow for the hmm users and core code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl0k1zkACgkQOG33FX4g
 mxrO+w//QF/yI/9Hh30RWEBq8W107cODkDlaT0Z/7cVEXfGetZzIUpqzxnJofRfQ
 xTw1XmYkc9WpJe/mTTuFZFewNQwWuMM6X0Xi25fV438/Y64EclevlcJTeD49TIH1
 CIMsz8bX7CnCEq5sz+UypLg9LPnaD9L/JLyuSbyjqjms/o+yzqa7ji7p/DSINuhZ
 Qva9OZL1ZSEDJfNGi8uGpYBqryHoBAonIL12R9sCF5pbJEnHfWrH7C06q7AWOAjQ
 4vjN/p3F4L9l/v2IQ26Kn/S0AhmN7n3GT//0K66e2gJPfXa8fxRKGuFn/Kd79EGL
 YPASn5iu3cM23up1XkbMNtzacL8yiIeTOcMdqw26OaOClojy/9OJduv5AChe6qL/
 VUQIAn1zvPsJTyC5U7mhmkrGuTpP6ivHpxtcaUp+Ovvi1cyK40nLCmSNvLnbN5ES
 bxbb0SjE4uupDG5qU6Yct/hFp6uVMSxMqXZOb9Xy8ZBkbMsJyVOLj71G1/rVIfPU
 hO1AChX5CRG1eJoMo6oBIpiwmSvcOaPp3dqIOQZvwMOqrO869LR8qv7RXyh/g9gi
 FAEKnwLl4GK3YtEO4Kt/1YI5DXYjSFUbfgAs0SPsRKS6hK2+RgRk2M/B/5dAX0/d
 lgOf9WPODPwiSXBYLtJB8qHVDX0DIY8faOyTx6BYIKClUtgbBI8=
 =wKvp
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull HMM updates from Jason Gunthorpe:
 "Improvements and bug fixes for the hmm interface in the kernel:

   - Improve clarity, locking and APIs related to the 'hmm mirror'
     feature merged last cycle. In linux-next we now see AMDGPU and
     nouveau to be using this API.

   - Remove old or transitional hmm APIs. These are hold overs from the
     past with no users, or APIs that existed only to manage cross tree
     conflicts. There are still a few more of these cleanups that didn't
     make the merge window cut off.

   - Improve some core mm APIs:
       - export alloc_pages_vma() for driver use
       - refactor into devm_request_free_mem_region() to manage
         DEVICE_PRIVATE resource reservations
       - refactor duplicative driver code into the core dev_pagemap
         struct

   - Remove hmm wrappers of improved core mm APIs, instead have drivers
     use the simplified API directly

   - Remove DEVICE_PUBLIC

   - Simplify the kconfig flow for the hmm users and core code"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits)
  mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR
  mm: remove the HMM config option
  mm: sort out the DEVICE_PRIVATE Kconfig mess
  mm: simplify ZONE_DEVICE page private data
  mm: remove hmm_devmem_add
  mm: remove hmm_vma_alloc_locked_page
  nouveau: use devm_memremap_pages directly
  nouveau: use alloc_page_vma directly
  PCI/P2PDMA: use the dev_pagemap internal refcount
  device-dax: use the dev_pagemap internal refcount
  memremap: provide an optional internal refcount in struct dev_pagemap
  memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag
  memremap: remove the data field in struct dev_pagemap
  memremap: add a migrate_to_ram method to struct dev_pagemap_ops
  memremap: lift the devmap_enable manipulation into devm_memremap_pages
  memremap: pass a struct dev_pagemap to ->kill and ->cleanup
  memremap: move dev_pagemap callbacks into a separate structure
  memremap: validate the pagemap type passed to devm_memremap_pages
  mm: factor out a devm_request_free_mem_region helper
  mm: export alloc_pages_vma
  ...
2019-07-14 19:42:11 -07:00
Christoph Hellwig
050a9adc64 mm: consolidate the get_user_pages* implementations
Always build mm/gup.c so that we don't have to provide separate nommu
stubs.  Also merge the get_user_pages_fast and __get_user_pages_fast stubs
when HAVE_FAST_GUP into the main implementations, which will never call
the fast path if HAVE_FAST_GUP is not set.

This also ensures the new put_user_pages* helpers are available for nommu,
as those are currently missing, which would create a problem as soon as we
actually grew users for it.

Link: http://lkml.kernel.org/r/20190625143715.1689-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 11:05:45 -07:00
Christoph Hellwig
43535b0aef mm: remove the HMM config option
All the mm/hmm.c code is better keyed off HMM_MIRROR.  Also let nouveau
depend on it instead of the mix of a dummy dependency symbol plus the
actually selected one.  Drop various odd dependencies, as the code is
pretty portable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02 14:32:45 -03:00
Dan Williams
e900a918b0 mm: shuffle initial free memory to improve memory-side-cache utilization
Patch series "mm: Randomize free memory", v10.

This patch (of 3):

Randomization of the page allocator improves the average utilization of
a direct-mapped memory-side-cache.  Memory side caching is a platform
capability that Linux has been previously exposed to in HPC
(high-performance computing) environments on specialty platforms.  In
that instance it was a smaller pool of high-bandwidth-memory relative to
higher-capacity / lower-bandwidth DRAM.  Now, this capability is going
to be found on general purpose server platforms where DRAM is a cache in
front of higher latency persistent memory [1].

Robert offered an explanation of the state of the art of Linux
interactions with memory-side-caches [2], and I copy it here:

    It's been a problem in the HPC space:
    http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/

    A kernel module called zonesort is available to try to help:
    https://software.intel.com/en-us/articles/xeon-phi-software

    and this abandoned patch series proposed that for the kernel:
    https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com

    Dan's patch series doesn't attempt to ensure buffers won't conflict, but
    also reduces the chance that the buffers will. This will make performance
    more consistent, albeit slower than "optimal" (which is near impossible
    to attain in a general-purpose kernel).  That's better than forcing
    users to deploy remedies like:
        "To eliminate this gradual degradation, we have added a Stream
         measurement to the Node Health Check that follows each job;
         nodes are rebooted whenever their measured memory bandwidth
         falls below 300 GB/s."

A replacement for zonesort was merged upstream in commit cc9aec03e5
("x86/numa_emulation: Introduce uniform split capability").  With this
numa_emulation capability, memory can be split into cache sized
("near-memory" sized) numa nodes.  A bind operation to such a node, and
disabling workloads on other nodes, enables full cache performance.
However, once the workload exceeds the cache size then cache conflicts
are unavoidable.  While HPC environments might be able to tolerate
time-scheduling of cache sized workloads, for general purpose server
platforms, the oversubscribed cache case will be the common case.

The worst case scenario is that a server system owner benchmarks a
workload at boot with an un-contended cache only to see that performance
degrade over time, even below the average cache performance due to
excessive conflicts.  Randomization clips the peaks and fills in the
valleys of cache utilization to yield steady average performance.

Here are some performance impact details of the patches:

1/ An Intel internal synthetic memory bandwidth measurement tool, saw a
   3X speedup in a contrived case that tries to force cache conflicts.
   The contrived cased used the numa_emulation capability to force an
   instance of the benchmark to be run in two of the near-memory sized
   numa nodes.  If both instances were placed on the same emulated they
   would fit and cause zero conflicts.  While on separate emulated nodes
   without randomization they underutilized the cache and conflicted
   unnecessarily due to the in-order allocation per node.

2/ A well known Java server application benchmark was run with a heap
   size that exceeded cache size by 3X.  The cache conflict rate was 8%
   for the first run and degraded to 21% after page allocator aging.  With
   randomization enabled the rate levelled out at 11%.

3/ A MongoDB workload did not observe measurable difference in
   cache-conflict rates, but the overall throughput dropped by 7% with
   randomization in one case.

4/ Mel Gorman ran his suite of performance workloads with randomization
   enabled on platforms without a memory-side-cache and saw a mix of some
   improvements and some losses [3].

While there is potentially significant improvement for applications that
depend on low latency access across a wide working-set, the performance
may be negligible to negative for other workloads.  For this reason the
shuffle capability defaults to off unless a direct-mapped
memory-side-cache is detected.  Even then, the page_alloc.shuffle=0
parameter can be specified to disable the randomization on those systems.

Outside of memory-side-cache utilization concerns there is potentially
security benefit from randomization.  Some data exfiltration and
return-oriented-programming attacks rely on the ability to infer the
location of sensitive data objects.  The kernel page allocator, especially
early in system boot, has predictable first-in-first out behavior for
physical pages.  Pages are freed in physical address order when first
onlined.

Quoting Kees:
    "While we already have a base-address randomization
     (CONFIG_RANDOMIZE_MEMORY), attacks against the same hardware and
     memory layouts would certainly be using the predictability of
     allocation ordering (i.e. for attacks where the base address isn't
     important: only the relative positions between allocated memory).
     This is common in lots of heap-style attacks. They try to gain
     control over ordering by spraying allocations, etc.

     I'd really like to see this because it gives us something similar
     to CONFIG_SLAB_FREELIST_RANDOM but for the page allocator."

While SLAB_FREELIST_RANDOM reduces the predictability of some local slab
caches it leaves vast bulk of memory to be predictably in order allocated.
However, it should be noted, the concrete security benefits are hard to
quantify, and no known CVE is mitigated by this randomization.

Introduce shuffle_free_memory(), and its helper shuffle_zone(), to perform
a Fisher-Yates shuffle of the page allocator 'free_area' lists when they
are initially populated with free memory at boot and at hotplug time.  Do
this based on either the presence of a page_alloc.shuffle=Y command line
parameter, or autodetection of a memory-side-cache (to be added in a
follow-on patch).

The shuffling is done in terms of CONFIG_SHUFFLE_PAGE_ORDER sized free
pages where the default CONFIG_SHUFFLE_PAGE_ORDER is MAX_ORDER-1 i.e.  10,
4MB this trades off randomization granularity for time spent shuffling.
MAX_ORDER-1 was chosen to be minimally invasive to the page allocator
while still showing memory-side cache behavior improvements, and the
expectation that the security implications of finer granularity
randomization is mitigated by CONFIG_SLAB_FREELIST_RANDOM.  The
performance impact of the shuffling appears to be in the noise compared to
other memory initialization work.

This initial randomization can be undone over time so a follow-on patch is
introduced to inject entropy on page free decisions.  It is reasonable to
ask if the page free entropy is sufficient, but it is not enough due to
the in-order initial freeing of pages.  At the start of that process
putting page1 in front or behind page0 still keeps them close together,
page2 is still near page1 and has a high chance of being adjacent.  As
more pages are added ordering diversity improves, but there is still high
page locality for the low address pages and this leads to no significant
impact to the cache conflict rate.

[1]: https://itpeernetwork.intel.com/intel-optane-dc-persistent-memory-operating-modes/
[2]: https://lkml.kernel.org/r/AT5PR8401MB1169D656C8B5E121752FC0F8AB120@AT5PR8401MB1169.NAMPRD84.PROD.OUTLOOK.COM
[3]: https://lkml.org/lkml/2018/10/12/309

[dan.j.williams@intel.com: fix shuffle enable]
  Link: http://lkml.kernel.org/r/154943713038.3858443.4125180191382062871.stgit@dwillia2-desk3.amr.corp.intel.com
[cai@lca.pw: fix SHUFFLE_PAGE_ALLOCATOR help texts]
  Link: http://lkml.kernel.org/r/20190425201300.75650-1-cai@lca.pw
Link: http://lkml.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Mike Rapoport
bda49a8116 mm: remove nobootmem
Move a few remaining functions from nobootmem.c to memblock.c and remove
nobootmem

Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport
aca52c3983 mm: remove CONFIG_HAVE_MEMBLOCK
All architecures use memblock for early memory management. There is no need
for the CONFIG_HAVE_MEMBLOCK configuration option.

[rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs]
  Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx
[rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal]
  Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx
[rppt@linux.vnet.ibm.com: remove stale #else and the code it protects]
  Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:15 -07:00
Mike Rapoport
b4a991ec58 mm: remove CONFIG_NO_BOOTMEM
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any
kernel configuration and therefore it can be removed.

[alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init]
  Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:14 -07:00
Linus Torvalds
5289851171 arm64 updates for 4.20:
- Core mmu_gather changes which allow tracking the levels of page-table
   being cleared together with the arm64 low-level flushing routines
 
 - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to
   mitigate Spectre-v4 dynamically without trapping to EL3 firmware
 
 - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack
 
 - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4
 
 - Support for Common Not Private (CnP) translations allowing threads of
   the same CPU to share the TLB entries
 
 - Accelerated crc32 routines
 
 - Move swapper_pg_dir to the rodata section
 
 - Trap WFI instruction executed in user space
 
 - ARM erratum 1188874 workaround (arch_timer)
 
 - Miscellaneous fixes and clean-ups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlvKGdEACgkQa9axLQDI
 XvGSQBAAiOH6aQABL4TB7c5KIc7C+Unjm6QCFCoaeGWoHuemnM6cFJ7RQsi0GqnP
 dVEX5V/FKfmeTWO5g24Ah+MbTm3Bt6+81gywAmi1rrHhmCaCIPjT7xDqy/WsLlvt
 7WtgegSGvQ7DIMj2dbfFav6+ra67qAiYZTc46jvuynVl6DrE3BCiyTDbXAWt2nzP
 Xf3un4AHRbg3UEMUZTLqU5q4z0tbM6rEAZru8O0UOTnD2q7uttUqW3Ab7fpuEkkj
 lEVrMWD3h8SJg+Df9CbXmCNOjh4VhwBwDb5LgO8vA/AcyV/YLEF5b2OUAk/28qwo
 0GBwjqRyI4+YQ9LPg41MhGzrlnta0HCdYoeNLgLQZiDcUkuSfGhoA+MNZNOR8B08
 sCWF7F6f8UIQm8KMMBiYYdlVyUYgHLsWE/1+CyeLV0oIoWT5k3c+Xe3pho9KpVb0
 Co04TqMlqalry0sbevHz5c55H7iWIjB1Tpo3SxM105dVJVibXRPXkz+WZ5iPO+xa
 ex2j1kjNdA/AUzrSCZ5lh22zhg0WsfwD++E5meAaJMxieim8FeZDRga43rowJ0BA
 zMbSNB/+NDFZ9EhC40VaUfKk8Tkgiug9J5swv0+v7hy1QLDyydHhbOecTuIueauM
 6taiT2Iuov5yFng1eonYj4htvouVF4WOhPGthFPJMOcrB9mLMhs=
 =3Mc8
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Apart from some new arm64 features and clean-ups, this also contains
  the core mmu_gather changes for tracking the levels of the page table
  being cleared and a minor update to the generic
  compat_sys_sigaltstack() introducing COMPAT_SIGMINSKSZ.

  Summary:

   - Core mmu_gather changes which allow tracking the levels of
     page-table being cleared together with the arm64 low-level flushing
     routines

   - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to
     mitigate Spectre-v4 dynamically without trapping to EL3 firmware

   - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack

   - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4

   - Support for Common Not Private (CnP) translations allowing threads
     of the same CPU to share the TLB entries

   - Accelerated crc32 routines

   - Move swapper_pg_dir to the rodata section

   - Trap WFI instruction executed in user space

   - ARM erratum 1188874 workaround (arch_timer)

   - Miscellaneous fixes and clean-ups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
  arm64: KVM: Guests can skip __install_bp_hardening_cb()s HYP work
  arm64: cpufeature: Trap CTR_EL0 access only where it is necessary
  arm64: cpufeature: Fix handling of CTR_EL0.IDC field
  arm64: cpufeature: ctr: Fix cpu capability check for late CPUs
  Documentation/arm64: HugeTLB page implementation
  arm64: mm: Use __pa_symbol() for set_swapper_pgd()
  arm64: Add silicon-errata.txt entry for ARM erratum 1188873
  Revert "arm64: uaccess: implement unsafe accessors"
  arm64: mm: Drop the unused cpu parameter
  MAINTAINERS: fix bad sdei paths
  arm64: mm: Use #ifdef for the __PAGETABLE_P?D_FOLDED defines
  arm64: Fix typo in a comment in arch/arm64/mm/kasan_init.c
  arm64: xen: Use existing helper to check interrupt status
  arm64: Use daifflag_restore after bp_hardening
  arm64: daifflags: Use irqflags functions for daifflags
  arm64: arch_timer: avoid unused function warning
  arm64: Trap WFI executed in userspace
  arm64: docs: Document SSBS HWCAP
  arm64: docs: Fix typos in ELF hwcaps
  arm64/kprobes: remove an extra semicolon in arch_prepare_kprobe
  ...
2018-10-22 17:30:06 +01:00
Peter Zijlstra
196d9d8bb7 mm/memory: Move mmu_gather and TLB invalidation code into its own file
In preparation for maintaining the mmu_gather code as its own entity,
move the implementation out of memory.c and into its own file.

Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-07 15:19:25 +01:00
Amir Goldstein
3d8f761531 vfs: implement readahead(2) using POSIX_FADV_WILLNEED
The implementation of readahead(2) syscall is identical to that of
fadvise64(POSIX_FADV_WILLNEED) with a few exceptions:
1. readahead(2) returns -EINVAL for !mapping->a_ops and fadvise64()
   ignores the request and returns 0.
2. fadvise64() checks for integer overflow corner case
3. fadvise64() calls the optional filesystem fadvise() file operation

Unite the two implementations by calling vfs_fadvise() from readahead(2)
syscall. Check the !mapping->a_ops in readahead(2) syscall to preserve
documented syscall ABI behaviour.

Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: d1d04ef857 ("ovl: stack file ops")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-08-30 20:01:32 +02:00
Mike Kravetz
5d752600a8 mm: restructure memfd code
With the addition of memfd hugetlbfs support, we now have the situation
where memfd depends on TMPFS -or- HUGETLBFS.  Previously, memfd was only
supported on tmpfs, so it made sense that the code resided in shmem.c.
In the current code, memfd is only functional if TMPFS is defined.  If
HUGETLFS is defined and TMPFS is not defined, then memfd functionality
will not be available for hugetlbfs.  This does not cause BUGs, just a
lack of potentially desired functionality.

Code is restructured in the following way:
- include/linux/memfd.h is a new file containing memfd specific
  definitions previously contained in shmem_fs.h.
- mm/memfd.c is a new file containing memfd specific code previously
  contained in shmem.c.
- memfd specific code is removed from shmem_fs.h and shmem.c.
- A new config option MEMFD_CREATE is added that is defined if TMPFS
  or HUGETLBFS is defined.

No functional changes are made to the code: restructuring only.

Link: http://lkml.kernel.org/r/20180415182119.4517-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07 17:34:35 -07:00
Randy Dunlap
8e7a0c9100 mm/swap_slots.c: use conditional compilation
For mm/swap_slots.c, use the traditional Linux method of conditional
compilation and linking instead of always compiling it by using #ifdef
CONFIG_SWAP and #endif for the entire source file (excluding header
files).

Link: http://lkml.kernel.org/r/c2a47015-0b5a-d0d9-8bc7-9984c049df20@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 21:36:24 -07:00
Kirill A. Shutemov
64c349f4ae mm: add infrastructure for get_user_pages_fast() benchmarking
Performance of get_user_pages_fast() is critical for some workloads, but
it's tricky to test it directly.

This patch provides /sys/kernel/debug/gup_benchmark that helps with
testing performance of it.

See tools/testing/selftests/vm/gup_benchmark.c for userspace
counterpart.

Link: http://lkml.kernel.org/r/20170908215603.9189-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Levin, Alexander (Sasha Levin)
4675ff05de kmemcheck: rip it out
Fix up makefiles, remove references, and git rm kmemcheck.

Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:05 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Jérôme Glisse
6b368cd4a4 mm/hmm: avoid bloating arch that do not make use of HMM
This moves all new code including new page migration helper behind kernel
Kconfig option so that there is no codee bloat for arch or user that do
not want to use HMM or any of its associated features.

arm allyesconfig (without all the patchset, then with and this patch):
   text	   data	    bss	    dec	    hex	filename
83721896	46511131	27582964	157815991	96814b7	../without/vmlinux
83722364	46511131	27582964	157816459	968168b	vmlinux

[jglisse@redhat.com: struct hmm is only use by HMM mirror functionality]
  Link: http://lkml.kernel.org/r/20170825213133.27286-1-jglisse@redhat.com
[sfr@canb.auug.org.au: fix build (arm multi_v7_defconfig)]
  Link: http://lkml.kernel.org/r/20170828181849.323ab81b@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170818032858.7447-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:46 -07:00
Jérôme Glisse
133ff0eac9 mm/hmm: heterogeneous memory management (HMM for short)
HMM provides 3 separate types of functionality:
    - Mirroring: synchronize CPU page table and device page table
    - Device memory: allocating struct page for device memory
    - Migration: migrating regular memory to device memory

This patch introduces some common helpers and definitions to all of
those 3 functionality.

Link: http://lkml.kernel.org/r/20170817000548.32038-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Evgeny Baskakov <ebaskakov@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Sherry Cheung <SCheung@nvidia.com>
Signed-off-by: Subhash Gutti <sgutti@nvidia.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:45 -07:00
Dennis Zhou
30a5b5367e percpu: expose statistics about percpu memory via debugfs
There is limited visibility into the use of percpu memory leaving us
unable to reason about correctness of parameters and overall use of
percpu memory. These counters and statistics aim to help understand
basic statistics about percpu memory such as number of allocations over
the lifetime, allocation sizes, and fragmentation.

New Config: PERCPU_STATS

Signed-off-by: Dennis Zhou <dennisz@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20 15:31:38 -04:00
Jinbum Park
2959a5f726 mm: add arch-independent testcases for RODATA
This patch makes arch-independent testcases for RODATA.  Both x86 and
x86_64 already have testcases for RODATA, But they are arch-specific
because using inline assembly directly.

And cacheflush.h is not a suitable location for rodata-test related
things.  Since they were in cacheflush.h, If someone change the state of
CONFIG_DEBUG_RODATA_TEST, It cause overhead of kernel build.

To solve the above issues, write arch-independent testcases and move it
to shared location.

[jinb.park7@gmail.com: fix config dependency]
  Link: http://lkml.kernel.org/r/20170209131625.GA16954@pjb1027-Latitude-E5410
Link: http://lkml.kernel.org/r/20170129105436.GA9303@pjb1027-Latitude-E5410
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:48 -08:00
Kirill A. Shutemov
ace71a19ce mm: introduce page_vma_mapped_walk()
Introduce a new interface to check if a page is mapped into a vma.  It
aims to address shortcomings of page_check_address{,_transhuge}.

Existing interface is not able to handle PTE-mapped THPs: it only finds
the first PTE.  The rest lefted unnoticed.

page_vma_mapped_walk() iterates over all possible mapping of the page in
the vma.

Link: http://lkml.kernel.org/r/20170129173858.45174-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:55 -08:00
Tim Chen
67afa38e01 mm/swap: add cache for swap slots allocation
We add per cpu caches for swap slots that can be allocated and freed
quickly without the need to touch the swap info lock.

Two separate caches are maintained for swap slots allocated and swap
slots returned.  This is to allow the swap slots to be returned to the
global pool in a batch so they will have a chance to be coaelesced with
other slots in a cluster.  We do not reuse the slots that are returned
right away, as it may increase fragmentation of the slots.

The swap allocation cache is protected by a mutex as we may sleep when
searching for empty slots in cache.  The swap free cache is protected by
a spin lock as we cannot sleep in the free path.

We refill the swap slots cache when we run out of slots, and we disable
the swap slots cache and drain the slots if the global number of slots
fall below a low watermark threshold.  We re-enable the cache agian when
the slots available are above a high watermark.

[ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access]
[tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h]
  Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com
Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 16:41:30 -08:00
Linus Torvalds
ef6000b4c6 Disable the __builtin_return_address() warning globally after all
This affectively reverts commit 377ccbb483 ("Makefile: Mute warning
for __builtin_return_address(>0) for tracing only") because it turns out
that it really isn't tracing only - it's all over the tree.

We already also had the warning disabled separately for mm/usercopy.c
(which this commit also removes), and it turns out that we will also
want to disable it for get_lock_parent_ip(), that is used for at least
TRACE_IRQFLAGS.  Which (when enabled) ends up being all over the tree.

Steven Rostedt had a patch that tried to limit it to just the config
options that actually triggered this, but quite frankly, the extra
complexity and abstraction just isn't worth it.  We have never actually
had a case where the warning is actually useful, so let's just disable
it globally and not worry about it.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-12 10:23:41 -07:00
Linus Torvalds
1eccfa090e Implements HARDENED_USERCOPY verification of copy_to_user/copy_from_user
bounds checking for most architectures on SLAB and SLUB.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJXl9tlAAoJEIly9N/cbcAm5BoP/ikTtDp2bFw1sn92yHTnIWzl
 O+dcKVAeRgjfnSvPfb1JITpaM58exQSaDsPBeR0DbVzU1zDdhLcwHHiQupFh98Ka
 vBZthbrlL/u4NB26enEEW0iyA32BsxYBMnIu0z5ux9RbZflmQwGQ0c0rvy3dJ7/b
 FzB5ayVST5y/a0m6/sImeeExh78GU9rsMb1XmJRMwlJAy6miDz/F9TP0LnuW6PhG
 J5XC99ygNJS1pQBLACRsrZw6ImgBxXnWCok6tWPMxFfD+rJBU2//wqS+HozyMWHL
 iYP7+ytVo/ZVok4114X/V4Oof3a6wqgpBuYrivJ228QO+UsLYbYLo6sZ8kRK7VFm
 9GgHo/8rWB1T9lBbSaa7UL5r0dVNNLjFGS42vwV+YlgUMQ1A35VRojO0jUnJSIQU
 Ug1IxKmylLd0nEcwD8/l3DXeQABsfL8GsoKW0OtdTZtW4RND4gzq34LK6t7hvayF
 kUkLg1OLNdUJwOi16M/rhugwYFZIMfoxQtjkRXKWN4RZ2QgSHnx2lhqNmRGPAXBG
 uy21wlzUTfLTqTpoeOyHzJwyF2qf2y4nsziBMhvmlrUvIzW1LIrYUKCNT4HR8Sh5
 lC2WMGYuIqaiu+NOF3v6CgvKd9UW+mxMRyPEybH8mEgfm+FLZlWABiBjIUpSEZuB
 JFfuMv1zlljj/okIQRg8
 =USIR
 -----END PGP SIGNATURE-----

Merge tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull usercopy protection from Kees Cook:
 "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and
  copy_from_user bounds checking for most architectures on SLAB and
  SLUB"

* tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mm: SLUB hardened usercopy support
  mm: SLAB hardened usercopy support
  s390/uaccess: Enable hardened usercopy
  sparc/uaccess: Enable hardened usercopy
  powerpc/uaccess: Enable hardened usercopy
  ia64/uaccess: Enable hardened usercopy
  arm64/uaccess: Enable hardened usercopy
  ARM: uaccess: Enable hardened usercopy
  x86/uaccess: Enable hardened usercopy
  mm: Hardened usercopy
  mm: Implement stack frame object validation
  mm: Add is_migrate_cma_page
2016-08-08 14:48:14 -07:00
Kirill A. Shutemov
b46e756f5e thp: extract khugepaged from mm/huge_memory.c
khugepaged implementation grew to the point when it deserve separate
file in source.

Let's move it to mm/khugepaged.c.

Link: http://lkml.kernel.org/r/1466021202-61880-32-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Kees Cook
f5509cc18d mm: Hardened usercopy
This is the start of porting PAX_USERCOPY into the mainline kernel. This
is the first set of features, controlled by CONFIG_HARDENED_USERCOPY. The
work is based on code by PaX Team and Brad Spengler, and an earlier port
from Casey Schaufler. Additional non-slab page tests are from Rik van Riel.

This patch contains the logic for validating several conditions when
performing copy_to_user() and copy_from_user() on the kernel object
being copied to/from:
- address range doesn't wrap around
- address range isn't NULL or zero-allocated (with a non-zero copy size)
- if on the slab allocator:
  - object size must be less than or equal to copy size (when check is
    implemented in the allocator, which appear in subsequent patches)
- otherwise, object must not span page allocations (excepting Reserved
  and CMA ranges)
- if on the stack
  - object must not extend before/after the current process stack
  - object must be contained by a valid stack frame (when there is
    arch/build support for identifying stack frames)
- object must not overlap with kernel text

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-26 14:41:47 -07:00
Vitaly Wool
9a001fc19c z3fold: the 3-fold allocator for compressed pages
This patch introduces z3fold, a special purpose allocator for storing
compressed pages.  It is designed to store up to three compressed pages
per physical page.  It is a ZBUD derivative which allows for higher
compression ratio keeping the simplicity and determinism of its
predecessor.

This patch comes as a follow-up to the discussions at the Embedded Linux
Conference in San-Diego related to the talk [1].  The outcome of these
discussions was that it would be good to have a compressed page
allocator as stable and deterministic as zbud with with higher
compression ratio.

To keep the determinism and simplicity, z3fold, just like zbud, always
stores an integral number of compressed pages per page, but it can store
up to 3 pages unlike zbud which can store at most 2.  Therefore the
compression ratio goes to around 2.6x while zbud's one is around 1.7x.

The patch is based on the latest linux.git tree.

This version has been updated after testing on various simulators (e.g.
ARM Versatile Express, MIPS Malta, x86_64/Haswell) and basing on
comments from Dan Streetman [3].

[1] https://openiotelc2016.sched.org/event/6DAC/swapping-and-embedded-compression-relieves-the-pressure-vitaly-wool-softprise-consulting-ou
[2] https://lkml.org/lkml/2016/4/21/799
[3] https://lkml.org/lkml/2016/5/4/852

Link: http://lkml.kernel.org/r/20160509151753.ec3f9fda3c9898d31ff52a32@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Alexander Potapenko
7ed2f9e663 mm, kasan: SLAB support
Add KASAN hooks to SLAB allocator.

This patch is based on the "mm: kasan: unified support for SLUB and SLAB
allocators" patch originally prepared by Dmitry Chernenkov.

Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Dmitry Vyukov
5c9a8750a6 kernel: add kcov code coverage
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing).  Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system.  A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/).  However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.

kcov does not aim to collect as much coverage as possible.  It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g.  scheduler, locking).

Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes.  Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch).  I've
dropped the second mode for simplicity.

This patch adds the necessary support on kernel side.  The complimentary
compiler support was added in gcc revision 231296.

We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:

  https://github.com/google/syzkaller/wiki/Found-Bugs

We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation".  For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.

Why not gcov.  Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat.  A
typical coverage can be just a dozen of basic blocks (e.g.  an invalid
input).  In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M).  Cost of
kcov depends only on number of executed basic blocks/edges.  On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.

kcov exposes kernel PCs and control flow to user-space which is
insecure.  But debugfs should not be mapped as user accessible.

Based on a patch by Quentin Casasnovas.

[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Joonsoo Kim
95813b8faa mm/page_ref: add tracepoint to track down page reference manipulation
CMA allocation should be guaranteed to succeed by definition, but,
unfortunately, it would be failed sometimes.  It is hard to track down
the problem, because it is related to page reference manipulation and we
don't have any facility to analyze it.

This patch adds tracepoints to track down page reference manipulation.
With it, we can find exact reason of failure and can fix the problem.
Following is an example of tracepoint output.  (note: this example is
stale version that printing flags as the number.  Recent version will
print it as human readable string.)

<...>-9018  [004]    92.678375: page_ref_set:         pfn=0x17ac9 flags=0x0 count=1 mapcount=0 mapping=(nil) mt=4 val=1
<...>-9018  [004]    92.678378: kernel_stack:
 => get_page_from_freelist (ffffffff81176659)
 => __alloc_pages_nodemask (ffffffff81176d22)
 => alloc_pages_vma (ffffffff811bf675)
 => handle_mm_fault (ffffffff8119e693)
 => __do_page_fault (ffffffff810631ea)
 => trace_do_page_fault (ffffffff81063543)
 => do_async_page_fault (ffffffff8105c40a)
 => async_page_fault (ffffffff817581d8)
[snip]
<...>-9018  [004]    92.678379: page_ref_mod:         pfn=0x17ac9 flags=0x40048 count=2 mapcount=1 mapping=0xffff880015a78dc1 mt=4 val=1
[snip]
...
...
<...>-9131  [001]    93.174468: test_pages_isolated:  start_pfn=0x17800 end_pfn=0x17c00 fin_pfn=0x17ac9 ret=fail
[snip]
<...>-9018  [004]    93.174843: page_ref_mod_and_test: pfn=0x17ac9 flags=0x40068 count=0 mapcount=0 mapping=0xffff880015a78dc1 mt=4 val=-1 ret=1
 => release_pages (ffffffff8117c9e4)
 => free_pages_and_swap_cache (ffffffff811b0697)
 => tlb_flush_mmu_free (ffffffff81199616)
 => tlb_finish_mmu (ffffffff8119a62c)
 => exit_mmap (ffffffff811a53f7)
 => mmput (ffffffff81073f47)
 => do_exit (ffffffff810794e9)
 => do_group_exit (ffffffff81079def)
 => SyS_exit_group (ffffffff81079e74)
 => entry_SYSCALL_64_fastpath (ffffffff817560b6)

This output shows that problem comes from exit path.  In exit path, to
improve performance, pages are not freed immediately.  They are gathered
and processed by batch.  During this process, migration cannot be
possible and CMA allocation is failed.  This problem is hard to find
without this page reference tracepoint facility.

Enabling this feature bloat kernel text 30 KB in my configuration.

   text    data     bss     dec     hex filename
12127327        2243616 1507328 15878271         f2487f vmlinux_disabled
12157208        2258880 1507328 15923416         f2f8d8 vmlinux_enabled

Note that, due to header file dependency problem between mm.h and
tracepoint.h, this feature has to open code the static key functions for
tracepoints.  Proposed by Steven Rostedt in following link.

https://lkml.org/lkml/2015/12/9/699

[arnd@arndb.de: crypto/async_pq: use __free_page() instead of put_page()]
[iamjoonsoo.kim@lge.com: fix build failure for xtensa]
[akpm@linux-foundation.org: tweak Kconfig text, per Vlastimil]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Laura Abbott
8823b1dbc0 mm/page_poison.c: enable PAGE_POISONING as a separate option
Page poisoning is currently set up as a feature if architectures don't
have architecture debug page_alloc to allow unmapping of pages.  It has
uses apart from that though.  Clearing of the pages on free provides an
increase in security as it helps to limit the risk of information leaks.
Allow page poisoning to be enabled as a separate option independent of
kernel_map pages since the two features do separate work.  Because of
how hiberanation is implemented, the checks on alloc cannot occur if
hibernation is enabled.  The runtime alloc checks can also be enabled
with an option when !HIBERNATION.

Credit to Grsecurity/PaX team for inspiring this work

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Linus Torvalds
06a660ada2 media updates for v4.3-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV8WvjAAoJEAhfPr2O5OEV5wIP/AjmqOau99ms4FvOQ932sO57
 kKDM4CYeTBkYY2Xz2eGStgxhcEj538JTf6SXdrceEEYJHb/GNCb2iBM1TnB4YciF
 rqhFv+n3R8h4Yn5KmhEhYzEfO7HUoyHPrOhcmTLzDoTO5wyrhAlPZxDWHohmfU84
 uQ8WyGPYLxwm8hdZ+/NkB8PXsGbWN65EoKzN6tt2kA6HUP52UxE0Cw7Qu7Iu5zmO
 y/x03mMbjhCBFFE41EeM76J+xKBhuaS4cyf8g08DJy5Zpf6ic8bKFmVg1tAFOZRD
 mCETLrUlPYhglHqOoVS25bCI5kCw9xTAyjPZdQnwCTwgHl5gG3E4oJYKASrmZlps
 igMSmLJEpQilsLy1Ze+K+Ci8EILmZzwbi21X0sbjq74Jd+tJZ+C8ZuWHVmPEF9j7
 iHtZNIRzkzufNBJZn3DsmlGBb/Xc/UqfZVnJAB9gu3Ktav6dmtEIHrGRPpL19iYH
 WtJWLt/Bpyb318K+fnxL8SzUqUxZJ4+8DrMtlgTqHmIRwVQ4CczyeWi0utQmBXEF
 CaNp00S2V9N1hn8OIc+gaf7LTYJn0LkHFsskoiUZ5aZQd9ai0ql0IT1xLe0r8lMi
 +ieB0Vp4wJtaodWIXOPeFugDqQXIb0Mh2M8J9FIJ116FLIai6btzO2iyVCtlR9Bg
 1uPztCfJ/nusPPHnE26R
 =TEFw
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "A series of patches that move part of the code used to allocate memory
  from the media subsystem to the mm subsystem"

[ The mm parts have been acked by VM people, and the series was
  apparently in -mm for a while   - Linus ]

* tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
  [media] media: vb2: Remove unused functions
  [media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector
  [media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector
  [media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector
  [media] vb2: Provide helpers for mapping virtual addresses
  [media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns()
  [media] mm: Provide new get_vaddr_frames() helper
  [media] vb2: Push mmap_sem down to memops
2015-09-11 16:42:39 -07:00
Vladimir Davydov
33c3fc71c8 mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g.  by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced.  However,
this method has two serious shortcomings:

 - it does not count unmapped file pages
 - it affects the reclaimer logic

To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g.  by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.

The Young page flag is used to avoid interference with the memory
reclaimer.  A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.

Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 13:29:01 -07:00
Andrea Arcangeli
c1a4de99fa userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation
This implements mcopy_atomic and mfill_zeropage that are the lowlevel
VM methods that are invoked respectively by the UFFDIO_COPY and
UFFDIO_ZEROPAGE userfaultfd commands.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Cc: zhang.zhanghailiang@huawei.com
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 16:54:41 -07:00
Jan Kara
8025e5ddf9 [media] mm: Provide new get_vaddr_frames() helper
Provide new function get_vaddr_frames().  This function maps virtual
addresses from given start and fills given array with page frame numbers of
the corresponding pages. If given start belongs to a normal vma, the function
grabs reference to each of the pages to pin them in memory. If start
belongs to VM_IO | VM_PFNMAP vma, we don't touch page structures. Caller
must make sure pfns aren't reused for anything else while he is using
them.

This function is created for various drivers to simplify handling of
their buffers.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16 13:02:47 -03:00
Vladimir Murzin
4a20799d11 mm: move memtest under mm
Memtest is a simple feature which fills the memory with a given set of
patterns and validates memory contents, if bad memory regions is detected
it reserves them via memblock API.  Since memblock API is widely used by
other architectures this feature can be enabled outside of x86 world.

This patch set promotes memtest to live under generic mm umbrella and
enables memtest feature for arm/arm64.

It was reported that this patch set was useful for tracking down an issue
with some errant DMA on an arm64 platform.

This patch (of 6):

There is nothing platform dependent in the core memtest code, so other
platforms might benefit from this feature too.

[linux@roeck-us.net: MEMTEST depends on MEMBLOCK]
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:06 -07:00
Sasha Levin
28b24c1fc8 mm: cma: debugfs interface
I've noticed that there is no interfaces exposed by CMA which would let me
fuzz what's going on in there.

This small patchset exposes some information out to userspace, plus adds
the ability to trigger allocation and freeing from userspace.

This patch (of 3):

Implement a simple debugfs interface to expose information about CMA areas
in the system.

Useful for testing/sanity checks for CMA since it was impossible to
previously retrieve this information in userspace.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:00 -07:00
Al Viro
d879cb8341 move iov_iter.c from mm/ to lib/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17 22:22:17 -05:00
Matthew Wilcox
e748dcd095 vfs: remove get_xip_mem
All callers of get_xip_mem() are now gone.  Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
 Also remove mm/filemap_xip.c as it is now empty.  Also remove
documentation of the long-gone get_xip_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16 17:56:03 -08:00
Andrey Ryabinin
0316bec22e mm: slub: add kernel address sanitizer support for slub allocator
With this patch kasan will be able to catch bugs in memory allocated by
slub.  Initially all objects in newly allocated slab page, marked as
redzone.  Later, when allocation of slub object happens, requested by
caller number of bytes marked as accessible, and the rest of the object
(including slub's metadata) marked as redzone (inaccessible).

We also mark object as accessible if ksize was called for this object.
There is some places in kernel where ksize function is called to inquire
size of really allocated area.  Such callers could validly access whole
allocated memory, so it should be marked as accessible.

Code in slub.c and slab_common.c files could validly access to object's
metadata, so instrumentation for this files are disabled.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Dmitry Chernenkov <dmitryc@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:41 -08:00
Andrey Ryabinin
0b24becc81 kasan: add kernel address sanitizer infrastructure
Kernel Address sanitizer (KASan) is a dynamic memory error detector.  It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.

KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required.  v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.

This patch only adds infrastructure for kernel address sanitizer.  It's
not available for use yet.  The idea and some code was borrowed from [1].

Basic idea:

The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.

Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.

Here is function to translate address to corresponding shadow address:

     unsigned long kasan_mem_to_shadow(unsigned long addr)
     {
                return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
     }

where KASAN_SHADOW_SCALE_SHIFT = 3.

So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible.  Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).

To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.

These functions check whether memory region is valid to access or not by
checking corresponding shadow memory.  If access is not valid an error
printed.

Historical background of the address sanitizer from Dmitry Vyukov:

	"We've developed the set of tools, AddressSanitizer (Asan),
	ThreadSanitizer and MemorySanitizer, for user space. We actively use
	them for testing inside of Google (continuous testing, fuzzing,
	running prod services). To date the tools have found more than 10'000
	scary bugs in Chromium, Google internal codebase and various
	open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
	lots of others): [2] [3] [4].
	The tools are part of both gcc and clang compilers.

	We have not yet done massive testing under the Kernel AddressSanitizer
	(it's kind of chicken and egg problem, you need it to be upstream to
	start applying it extensively). To date it has found about 50 bugs.
	Bugs that we've found in upstream kernel are listed in [5].
	We've also found ~20 bugs in out internal version of the kernel. Also
	people from Samsung and Oracle have found some.

	[...]

	As others noted, the main feature of AddressSanitizer is its
	performance due to inline compiler instrumentation and simple linear
	shadow memory. User-space Asan has ~2x slowdown on computational
	programs and ~2x memory consumption increase. Taking into account that
	kernel usually consumes only small fraction of CPU and memory when
	running real user-space programs, I would expect that kernel Asan will
	have ~10-30% slowdown and similar memory consumption increase (when we
	finish all tuning).

	I agree that Asan can well replace kmemcheck. We have plans to start
	working on Kernel MemorySanitizer that finds uses of unitialized
	memory. Asan+Msan will provide feature-parity with kmemcheck. As
	others noted, Asan will unlikely replace debug slab and pagealloc that
	can be enabled at runtime. Asan uses compiler instrumentation, so even
	if it is disabled, it still incurs visible overheads.

	Asan technology is easily portable to other architectures. Compiler
	instrumentation is fully portable. Runtime has some arch-dependent
	parts like shadow mapping and atomic operation interception. They are
	relatively easy to port."

Comparison with other debugging features:
========================================

KMEMCHECK:

  - KASan can do almost everything that kmemcheck can.  KASan uses
    compile-time instrumentation, which makes it significantly faster than
    kmemcheck.  The only advantage of kmemcheck over KASan is detection of
    uninitialized memory reads.

    Some brief performance testing showed that kasan could be
    x500-x600 times faster than kmemcheck:

$ netperf -l 30
		MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
		Recv   Send    Send
		Socket Socket  Message  Elapsed
		Size   Size    Size     Time     Throughput
		bytes  bytes   bytes    secs.    10^6bits/sec

no debug:	87380  16384  16384    30.00    41624.72

kasan inline:	87380  16384  16384    30.00    12870.54

kasan outline:	87380  16384  16384    30.00    10586.39

kmemcheck: 	87380  16384  16384    30.03      20.23

  - Also kmemcheck couldn't work on several CPUs.  It always sets
    number of CPUs to 1.  KASan doesn't have such limitation.

DEBUG_PAGEALLOC:
	- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
	  granularity level, so it able to find more bugs.

SLUB_DEBUG (poisoning, redzones):
	- SLUB_DEBUG has lower overhead than KASan.

	- SLUB_DEBUG in most cases are not able to detect bad reads,
	  KASan able to detect both reads and writes.

	- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
	  bugs only on allocation/freeing of object. KASan catch
	  bugs right before it will happen, so we always know exact
	  place of first bad read/write.

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies

Based on work by Andrey Konovalov.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:40 -08:00
Kirill A. Shutemov
c8d78c1823 mm: replace remap_file_pages() syscall with emulation
remap_file_pages(2) was invented to be able efficiently map parts of
huge file into limited 32-bit virtual address space such as in database
workloads.

Nonlinear mappings are pain to support and it seems there's no
legitimate use-cases nowadays since 64-bit systems are widely available.

Let's drop it and get rid of all these special-cased code.

The patch replaces the syscall with emulation which creates new VMA on
each remap_file_pages(), unless they it can be merged with an adjacent
one.

I didn't find *any* real code that uses remap_file_pages(2) to test
emulation impact on.  I've checked Debian code search and source of all
packages in ALT Linux.  No real users: libc wrappers, mentions in
strace, gdb, valgrind and this kind of stuff.

There are few basic tests in LTP for the syscall.  They work just fine
with emulation.

To test performance impact, I've written small test case which
demonstrate pretty much worst case scenario: map 4G shmfs file, write to
begin of every page pgoff of the page, remap pages in reverse order,
read every page.

The test creates 1 million of VMAs if emulation is in use, so I had to
set vm.max_map_count to 1100000 to avoid -ENOMEM.

Before:		23.3 ( +-  4.31% ) seconds
After:		43.9 ( +-  0.85% ) seconds
Slowdown:	1.88x

I believe we can live with that.

Test case:

        #define _GNU_SOURCE
        #include <assert.h>
        #include <stdlib.h>
        #include <stdio.h>
        #include <sys/mman.h>

        #define MB	(1024UL * 1024)
        #define SIZE	(4096 * MB)

        int main(int argc, char **argv)
        {
                unsigned long *p;
                long i, pass;

                for (pass = 0; pass < 10; pass++) {
                        p = mmap(NULL, SIZE, PROT_READ|PROT_WRITE,
                                        MAP_SHARED | MAP_ANONYMOUS, -1, 0);
                        if (p == MAP_FAILED) {
                                perror("mmap");
                                return -1;
                        }

                        for (i = 0; i < SIZE / 4096; i++)
                                p[i * 4096 / sizeof(*p)] = i;

                        for (i = 0; i < SIZE / 4096; i++) {
                                if (remap_file_pages(p + i * 4096 / sizeof(*p), 4096,
                                                0, (SIZE - 4096 * (i + 1)) >> 12, 0)) {
                                        perror("remap_file_pages");
                                        return -1;
                                }
                        }

                        for (i = SIZE / 4096 - 1; i >= 0; i--)
                                assert(p[i * 4096 / sizeof(*p)] == SIZE / 4096 - i - 1);

                        munmap(p, SIZE);
                }

                return 0;
        }

[akpm@linux-foundation.org: fix spello]
[sasha.levin@oracle.com: initialize populate before usage]
[sasha.levin@oracle.com: grab file ref to prevent race while mmaping]
Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Armin Rigo <arigo@tunes.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10 14:30:30 -08:00