Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40
The reason for this error report is that kprobes handling code failed
to restore irqs.
The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep <- original kprobe (saves kprobe_saved_imask)
enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)
There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.
Cc: stable@vger.kernel.org
Fixes: 4ba069b802 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit f05f62d042 ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.
As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.
Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.
Fixes: f05f62d042 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Produce arch/s390/boot/vmlinux.map link map for the decompressor, when
CONFIG_VMLINUX_MAP option is enabled.
Link map is quite useful during making kernel changes related to how
the decompressor is composed and debugging linker scripts.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Clear CPU state (e.g. all TLB entries, prefetched instructions, etc.)
of the target CPU, however without clearing register contents before
starting any work on it.
This puts the target CPU in a more defined state compared to the
current Stop + Restart sigp orders.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If a machine check interrupt hits while user process is
running __s390_handle_mcck() helper function is called
directly from the interrupt handler and terminates the
current process by calling make_task_dead() routine.
The make_task_dead() is not allowed to be called from
interrupt context which forces the machine check handler
switch to the kernel stack and enable local interrupts
first.
The __s390_handle_mcck() could also be called to service
pending work, but this time from the external interrupts
handler. It is the machine check handler that establishes
the work and schedules the external interrupt, therefore
the machine check interrupt itself should be disabled
while reading out the corresponding variable:
local_mcck_disable();
mcck = *this_cpu_ptr(&cpu_mcck);
memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
local_mcck_enable();
However, local_mcck_disable() does not have effect when
__s390_handle_mcck() is called directly form the machine
check handler, since the machine check interrupt is still
disabled. Therefore, it is not the opening bracket to the
following local_mcck_enable() function.
Simplify the user process termination flow by scheduling
the external interrupt and killing the affected process
from the interrupt context.
Assume a kernel-generated signal is always delivered and
ignore a value returned by do_send_sig_info() funciton.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use READ_ONCE_ALIGNED_128() to read the previous value in front of a
128-bit cmpxchg loop, instead of (mis-)using a 128-bit cmpxchg operation to
do the same.
This makes the code more readable and is faster.
Link: https://lore.kernel.org/r/20230224100237.3247871-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add an s390 specific READ_ONCE_ALIGNED_128() helper, which can be used for
fast block concurrent (atomic) 128-bit accesses.
The used lpq instruction requires 128-bit alignment. This is also the
reason why the compiler doesn't emit this instruction if __READ_ONCE() is
used for 128-bit accesses.
Link: https://lore.kernel.org/r/20230224100237.3247871-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a new ap queue status register wrapper union to access register
wide values. So the inline assembler only sees register wide values but the
surrounding code may use a more structured view of the same value and a
reader of the code (and the compiler) gets a clear understanding about the
mapping between fields and register values.
All the changes to access the ap queue status are local to the inline
functions within ap.h. However, the struct ap_qirq_ctrl has been replaces
by a union for same reason and this needed slight adaptions in the calling
code.
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Andreas Arnez <arnez@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When a machine check is received while in SIE, it is reinjected into the
guest in some cases. The respective code needs to access the sie_block,
which is taken from the backed up R14.
Since reinjection only occurs while we are in SIE (i.e. between the
labels sie_entry and sie_leave in entry.S and thus if CIF_MCCK_GUEST is
set), the backed up R14 will always contain a physical address in
s390_backup_mcck_info.
This currently works, because virtual and physical addresses are
the same.
Add phys_to_virt() to resolve the virtual-physical confusion.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20230216121208.4390-2-nrb@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently there are several kernel command line parameters which are
only parsed and handled in decompressor and not known to the kernel.
This leads to the following error message during kernel boot:
Unknown kernel command line parameters "mem=3G nokaslr", will be passed
to user space.
To avoid confusion, register those parameters with an empty stub so that
kernel does not complain about them.
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
* Background Color Support
* ASCII Line Character Support
* VT100 Support
* Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest memory
with a specific storage key.
- Add support for user space events counting to CPUMF.
- Cleanup the vfio/ccw code, which also allows now to properly support 2K
Format-2 IDALs.
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address translation
enabled. This in turn allows to get rid of code with special handling in
the kernel, which has to distinguish if DAT is on or off.
- Replace kretprobe with rethook.
- Various improvements to vfio/ap queue resets:
* Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
* Check TAPQ response codes when verifying successful completion of ZAPQ.
* Fix erroneous handling of some error response codes.
* Increase the maximum amount of time to wait for successful completion
of ZAPQ.
- Rework system call wrappers to get rid of alias functions, which were
only left on s390.
- Cleanup diag288_wdt watchdog driver. It has been agreed on with Guenter
Roeck that this goes upstream via the s390 tree.
- Add missing loadparm parameter handling for list-directed ECKD ipl/reipl.
- Various improvements to memory detection code.
- Remove arch_cpu_idle_time() since the current implementation is broken,
and allows user space observable accounted idle times which can
temporarily decrease.
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO to
RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all CPUs
are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all CPU
synchronization, like it is required with IPTE, should be beneficial.
- Fix KFENCE page fault reporting.
- Smaller cleanups and improvement all over the place.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmPzWhQACgkQIg7DeRsp
bsKkdQ//QbCwDMt6T3bmi6gGgs9HRSkLOTHAlOIRuetEzRiBzm/O4Gm8NycvPspl
BIcuXmQKt+gBS44tWikKpwuhmWrAtiFUxs/M1uPfRXqjUf+ZFJinPJgtPCBa/3rv
tQkh541QxpX4K5Ks71WKv2Kh0RjaTqw5Kj+rlDBYHsxZvb28mDigINRYoVSxNUKi
dTVlR0UgdGLecXfezpvWeEAbJu6Q2pbIkOT3tNOumNqRAoUN4cbH3P0agHJdq8oj
L/++d4tfVbwL8N/VCwIVBeW/AQzA0B2UCDVz75Pd55+FFrIGVp1hn7QC9QQieomL
fzGOTrL4D9U8JkAIJqhioA1NlcN1+QW2svoMVo0N3vBJpIbzX4bZKTDxZZ26dG9H
ox7YvhsZtJA7p34X5hetoObzZcmiYJStT+BDao7q1x3oLf4G31HaP+YUDIKBPmNW
ieZa+ujYbKor1pD6ysaMVX+c1qhfX6S/V0uBAikoqMWUVUvH/ZeuSxCSfMuvWUrQ
KFuc0HnPiiIO1Ux3wN5oN33+pWCSdUcJOeg4aj0jkkFT9Ct3TOBupIGBGyhOAh6r
OTp1iqJuQjwOmkWPLyRuGMzRmDDp+hWz9qNF/DFwIV1IMi9AzJjEOg31cMVxx3gG
iM25560uqvhhUwQFbyjVgJmj00dmqMX07q8QSVOgg9oUrnRhQrc=
=MW9x
-----END PGP SIGNATURE-----
Merge tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
- Background Color Support
- ASCII Line Character Support
- VT100 Support
- Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest
memory with a specific storage key
- Add support for user space events counting to CPUMF
- Cleanup the vfio/ccw code, which also allows now to properly support
2K Format-2 IDALs
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address
translation enabled. This in turn allows to get rid of code with
special handling in the kernel, which has to distinguish if DAT is on
or off
- Replace kretprobe with rethook
- Various improvements to vfio/ap queue resets:
- Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
- Check TAPQ response codes when verifying successful completion of
ZAPQ.
- Fix erroneous handling of some error response codes.
- Increase the maximum amount of time to wait for successful
completion of ZAPQ
- Rework system call wrappers to get rid of alias functions, which were
only left on s390
- Cleanup diag288_wdt watchdog driver. It has been agreed on with
Guenter Roeck that this goes upstream via the s390 tree
- Add missing loadparm parameter handling for list-directed ECKD
ipl/reipl
- Various improvements to memory detection code
- Remove arch_cpu_idle_time() since the current implementation is
broken, and allows user space observable accounted idle times which
can temporarily decrease
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO
to RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all
CPUs are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all
CPU synchronization, like it is required with IPTE, should be
beneficial
- Fix KFENCE page fault reporting
- Smaller cleanups and improvement all over the place
* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
s390/irq,idle: simplify idle check
s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
s390/processor: let cpu helper functions return boolean values
s390/kfence: fix page fault reporting
s390/zcrypt: introduce ctfm field in struct CPRBX
s390: remove confusing comment from uapi types header file
vfio/ccw: remove WARN_ON during shutdown
s390/entry: remove toolchain dependent micro-optimization
s390/mem_detect: do not truncate online memory ranges info
s390/vx: remove __uint128_t type from __vector128 struct again
s390/mm: add support for RDP (Reset DAT-Protection)
s390/mm: define private VM_FAULT_* reasons from top bits
Documentation: s390: correct spelling
s390/ap: fix status returned by ap_qact()
s390/ap: fix status returned by ap_aqic()
s390: vfio-ap: tighten the NIB validity check
Revert "s390/mem_detect: do not update output parameters on failure"
s390/idle: remove arch_cpu_idle_time() and corresponding code
s390/vx: use simple assignments to access __vector128 members
s390/vx: add 64 and 128 bit members to __vector128 struct
...
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmPzaHgRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1jYQg/+KRfobCevMQlZVnz09T3SsJ4ahJ587BL6
g2C6kobyUNfeChpFVroBkTR+yCb6Mq4xGr2nda9+2E978BYu9eanpx/u/bXNQ6NU
6YhLwgRrlFXonYn07kFfUJeELZ0W+zpPvymEN1KhTQWcrgXDfXRt2VfMwNsVxGRF
ZRyCWK+UOzSMU22FtW3I/xVLBB0vio9Y6wRC5QOpDVW5YtGwQGust7GJ53JPK43J
m2soJvWORauT+v0aqc7ggOtKd6pahVoXrDrbktxtq9N0ZGI+PubVCGevex++cXm/
B3QSf6VcMMuU6pfzxiEwRa8Whrc3XFeSDEfvMjC5v3becGNkdNBnGOJzYprwgRZJ
irb6/dSrv5P2lj6WphsO1Wzcm7EoWh8M7DVOMh/13Y/oODRdOrv48112Don9UURC
EPyvzAzizqdwdDopUmfiqUwuAXqb8uPZqCgmlz/NJkVz1/ijlfrmLgeDuf0vI7Aq
HznzzRwjFHzyCH7D+rtonFh3JDaqgaouY76tpC5yTtzKbZPlFT8kzeCvqkTMnGgH
czZnSNc/kBup0HDkNSlthK+TyrMXWKeVa8KQSY1E0NJHO4IBBCMzZywSoAaeofQK
hqfQyofX9XHmuHhCA4yIfv1XkZGlBTxpPAyDdHjgs9iJTsodSYMs8ESY08eW8DXn
Ld/35O6SylM=
=ztUT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
Use the per-cpu CIF_ENABLED_WAIT flag to decide if an interrupt
occurred while a cpu was idle, instead of checking two conditions
within the old psw.
Also move clearing of the CIF_ENABLED_WAIT bit to the early interrupt
handler, which in turn makes arch_vcpu_is_preempted() also a bit more
precise, since the flag is now cleared before interrupt handlers have
been called.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let cpu helper functions return boolean values. This also allows to
make the code a bit simpler by getting rid of the "!!" construct.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Baoquan He reported lots of KFENCE reports when /proc/kcore is read,
e.g. with crash or even simpler with dd:
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x5e/0x120
Invalid read at 0x00000000f4f5149f:
copy_from_kernel_nofault+0x5e/0x120
read_kcore+0x6b2/0x870
proc_reg_read+0x9a/0xf0
vfs_read+0x94/0x270
ksys_read+0x70/0x100
__do_syscall+0x1d0/0x200
system_call+0x82/0xb0
The reason for this is that read_kcore() simply reads memory that might
have been unmapped by KFENCE with copy_from_kernel_nofault(). Any fault due
to pages being unmapped by KFENCE would be handled gracefully by the fault
handler (exception table fixup).
However the s390 fault handler first reports the fault, and only afterwards
would perform the exception table fixup. Most architectures have this in
reversed order, which also avoids the false positive KFENCE reports when an
unmapped page is accessed.
Therefore change the s390 fault handler so it handles exception table
fixups before KFENCE page faults are reported.
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20230213183858.1473681-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Modify the CPRBX struct to expose a new field ctfm for use with hardware
command filtering within a CEX8 crypto card in CCA coprocessor mode.
The field replaces a reserved byte padding field so that the layout of the
struct and the size does not change.
The new field is used only by user space applications which may use this to
expose the HW filtering facilities in the crypto firmware layers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The comment for addr_t doesn't make too much sense. Given that also
the formatting is incorrect, just remove it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of CONFIG_AS_IS_LLVM in entry.S to make the code a bit more
readable. This removes a micro-optimization, but given that the llvm IAS
limitation will likely stay, just use the version that works with llvm.
See commit 4c25f0ff63 ("s390/entry: workaround llvm's IAS limitations")
for further details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit bf64f0517e ("s390/mem_detect: handle online memory limit
just once") introduced truncation of mem_detect online ranges
based on identity mapping size. For kdump case however the full
set of online memory ranges has to be feed into memblock_physmem_add
so that crashed system memory could be extracted.
Instead of truncating introduce a "usable limit" which is respected by
mem_detect api. Also add extra online memory ranges iterator which still
provides full set of online memory ranges disregarding the "usable limit".
Fixes: bf64f0517e ("s390/mem_detect: handle online memory limit just once")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The __uint128_t member was only added for future convenience to the
__vector128 struct. However this is a uapi header file, 31/32 bit (aka
compat layer) is still supported, but doesn't know anything about this
type:
/usr/include/asm/types.h:27:17: error: unknown type name __uint128_t
27 | __uint128_t v;
Therefore remove it again.
Fixes: b0b7b43fcc ("s390/vx: add 64 and 128 bit members to __vector128 struct")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
RDP instruction allows to reset DAT-protection bit in a PTE, with less
CPU synchronization overhead than IPTE instruction. In particular, IPTE
can cause machine-wide synchronization overhead, and excessive IPTE usage
can negatively impact machine performance.
RDP can be used instead of IPTE, if the new PTE only differs in SW bits
and _PAGE_PROTECT HW bit, for PTE protection changes from RO to RW.
SW PTE bit changes are allowed, e.g. for dirty and young tracking, but none
of the other HW-defined part of the PTE must change. This is because the
architecture forbids such changes to an active and valid PTE, which
is why invalidation with IPTE is always used first, before writing a new
entry.
The RDP optimization helps mainly for fault-driven SW dirty-bit tracking.
Writable PTEs are initially always mapped with HW _PAGE_PROTECT bit set,
to allow SW dirty-bit accounting on first write protection fault, where
the DAT-protection would then be reset. The reset is now done with RDP
instead of IPTE, if RDP instruction is available.
RDP cannot always guarantee that the DAT-protection reset is propagated
to all CPUs immediately. This means that spurious TLB protection faults
on other CPUs can now occur. For this, common code provides a
flush_tlb_fix_spurious_fault() handler, which will now be used to do a
CPU-local TLB flush. However, this will clear the whole TLB of a CPU, and
not just the affected entry. For more fine-grained flushing, by simply
doing a (local) RDP again, flush_tlb_fix_spurious_fault() would need to
also provide the PTE pointer.
Note that spurious TLB protection faults cannot really be distinguished
from racing pagetable updates, where another thread already installed the
correct PTE. In such a case, the local TLB flush would be unnecessary
overhead, but overall reduction of CPU synchronization overhead by not
using IPTE is still expected to be beneficial.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The current definition already collapse with the generic definition of
vm_fault_reason. Move the private definitions to allocate bits from the
top of uint so they won't collapse anymore.
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20230205231704.909536-4-peterx@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI
gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd
agIZTkRs6BHF9He8oROypARZxTeMLwM=
=nO1C
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad2 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 159491f3b5 ("s390/ap: rework assembler functions to use
unions for in/out register variables") the function ap_qact() tries to
grab the status from the wrong part of the register. Thus we always end
up with zeros. Which is wrong, among others, because we detect failures
via status.response_code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 159491f3b5 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There function ap_aqic() tries to grab the status from the
wrong part of the register. Thus we always end up with
zeros. Which is wrong, among others, because we detect
failures via status.response_code.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 159491f3b5 ("s390/ap: rework assembler functions to use unions for in/out register variables")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This reverts commit cbc29f107e.
Get rid of the following smatch warnings:
arch/s390/include/asm/mem_detect.h:86 get_mem_detect_end() error: uninitialized symbol 'end'.
arch/s390/include/asm/mem_detect.h:86 get_mem_detect_end() error: uninitialized symbol 'end'.
arch/s390/boot/vmem.c:256 setup_vmem() error: uninitialized symbol 'start'.
arch/s390/boot/vmem.c:258 setup_vmem() error: uninitialized symbol 'end'.
Note that there is no bug in the code. This is purely to silence smatch.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
arch_cpu_idle_time() returns the idle time of any given cpu if it is in
idle, or zero if not. All if this is racy and partially incorrect. Time
stamps taken with store clock extended and store clock fast from different
cpus are compared, while the architecture states that this is nothing which
can be relied on (see Principles of Operation; Chapter 4, "Setting and
Inspecting the Clock").
A more fundamental problem is that the timestamp when a cpu is leaving idle
is taken early in the assembler part of the interrupt handler, and this
value is only transferred many cycles later to the cpu's per-cpu idle data
structure.
This per cpu data structure is read by arch_cpu_idle() to tell for which
period of time a remote cpu is idle: if only an idle_enter value is
present, the assumed idle time of the cpu is calculated by taking a local
timestamp and returning the difference of the local timestamp and the
idle_enter value. This is potentially incorrect, since the remote cpu may
have already left idle, but the taken timestamp may not have been
transferred to the per-cpu data structure. This in turn means that too much
idle time may be reported for a cpu, and a subsequent calculation of system
idle time may result in a smaller value.
Instead of coming up with even more complex code trying to fix this, just
remove this code, and only account idle time of a cpu, after idle state is
left.
Another minor bug is that it is assumed that timestamps are non-zero, which
is not necessarily the case for timestamps taken with store clock
fast. This however is just a very minor problem, since this can only happen
when the epoch increases.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add 64 and 128 bit members to __vector128 struct in order to allow reading
of the complete value, or the higher or lower part of vector register
contents instead of having to use casts.
Add an explicit __aligned(4) statement to avoid that the alignment of the
structure changes from 4 to 8. This should make sure that no breakage
happens because of this change.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
arch_cpu_idle() is marked noinstr and therefore must only call functions
which are also not instrumented.
Make sure that cpu flag helper functions are always inlined to avoid that
the compiler generates an out-of-line function for e.g. the call within
arch_cpu_idle().
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is no reason to do idle time accounting in arch_cpu_idle().
Do idle time accounting in account_idle_time_irq(), where it belongs
to. The accounted values don't change between account_idle_time_irq() and
arch_cpu_idle(); so the result is the same.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Facilities setup has to be done after "facilities" command line option
parsing, it might set extra or remove existing facilities bits for
testing purposes.
Fixes: bb1520d581 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
KASAN common code is able to handle memory hotplug and create KASAN shadow
memory on a fly. Online memory ranges are available from mem_detect,
use this information to avoid mapping KASAN shadow for standby memory.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If kernel is build without KASAN support there is a chance that kernel
image is going to be positioned by KASLR code to overlap with identity
mapping page tables.
When kernel is build with KASAN support enabled memory which
is potentially going to be used for page tables and KASAN
shadow mapping is accounted for in KASLR with the use of
kasan_estimate_memory_needs(). Split this function and introduce
vmem_estimate_memory_needs() to cover decompressor's vmem identity
mapping page tables.
Fixes: bb1520d581 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a function to get online memory in total. It is supposed to be used
in the decompressor as well as during early kernel startup.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce mem_detect_truncate() to cut any online memory ranges above
established identity mapping size, so that mem_detect users wouldn't
have to do it over and over again.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Allocation of mem_detect extended area was not considered neither
in commit 9641b8cc73 ("s390/ipl: read IPL report at early boot")
nor in commit b2d24b97b2 ("s390/kernel: add support for kernel address
space layout randomization (KASLR)"). As a result mem_detect extended
theoretically may overlap with ipl report or randomized kernel image
position. But as mem_detect code will allocate extended area only
upon exceeding 255 online regions (which should alternate with offline
memory regions) it is not seen in practice.
To make sure mem_detect extended area does not overlap with ipl report
or randomized kernel position extend usage of "safe_addr". Make initrd
handling and mem_detect extended area allocation code move it further
right and make KASLR takes in into consideration as well.
Fixes: 9641b8cc73 ("s390/ipl: read IPL report at early boot")
Fixes: b2d24b97b2 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In case sclp_early_get_memsize() fails but diag260() succeeds make sure
some sane value is returned. This error scenario is highly unlikely,
but this change makes system able to boot in such case.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of this sparse warning:
arch/s390/kernel/diag.c:69:29: warning: symbol '__diag8c_tmp_amode31' was not declared. Should it be static?
Fixes: fbaee7464f ("s390/tty3270: add support for diag 8c")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Compiling the kernel with CONFIG_KPROBES disabled, but CONFIG_RETHOOK
enabled, results in this sparse warning:
arch/s390/kernel/rethook.c:26:15: warning: no previous prototype for 'arch_rethook_trampoline_callback' [-Wmissing-prototypes]
26 | unsigned long arch_rethook_trampoline_callback(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add a local rethook header file similar to riscv to address this.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1a280f48c0 ("s390/kprobes: replace kretprobe with rethook")
Link: https://lore.kernel.org/all/202302030102.69dZIuJk-lkp@intel.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Kasan shadow memory area has been moved to the end of kernel address
space since commit 9a39abb7c9 ("s390/boot: simplify and fix kernel
memory layout setup"), therefore skipping any memory ranges above
VMALLOC_START in empty page tables cleanup code already handles
KASAN shadow memory intersection case and explicit checks could be
removed.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
