mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 17:11:33 +00:00
426b313f35
26484 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kemeng Shi
|
6d144436d9 |
mm/page_table_check: remove unused parameter in [__]page_table_check_pud_set
Remove unused addr in __page_table_check_pud_set and page_table_check_pud_set. Link: https://lkml.kernel.org/r/20230713172636.1705415-9-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kemeng Shi
|
a3b837130b |
mm/page_table_check: remove unused parameter in [__]page_table_check_pmd_set
Remove unused addr in __page_table_check_pmd_set and page_table_check_pmd_set. Link: https://lkml.kernel.org/r/20230713172636.1705415-8-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kemeng Shi
|
1066293d42 |
mm/page_table_check: remove unused parameter in [__]page_table_check_pte_set
Remove unused addr in __page_table_check_pte_set and page_table_check_pte_set. Link: https://lkml.kernel.org/r/20230713172636.1705415-7-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kemeng Shi
|
1831414cd7 |
mm/page_table_check: remove unused parameter in [__]page_table_check_pmd_clear
Remove unused addr in page_table_check_pmd_clear and __page_table_check_pmd_clear. Link: https://lkml.kernel.org/r/20230713172636.1705415-5-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kemeng Shi
|
aa232204c4 |
mm/page_table_check: remove unused parameter in [__]page_table_check_pte_clear
Remove unused addr in page_table_check_pte_clear and __page_table_check_pte_clear. Link: https://lkml.kernel.org/r/20230713172636.1705415-4-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Peter Collingbourne
|
332c151c71 |
arm64: mte: simplify swap tag restoration logic
As a result of the patches "mm: Call arch_swap_restore() from do_swap_page()" and "mm: Call arch_swap_restore() from unuse_pte()", there are no circumstances in which a swapped-in page is installed in a page table without first having arch_swap_restore() called on it. Therefore, we no longer need the logic in set_pte_at() that restores the tags, so remove it. Link: https://lkml.kernel.org/r/20230523004312.1807357-4-pcc@google.com Link: https://linux-review.googlesource.com/id/I8ad54476f3b2d0144ccd8ce0c1d7a2963e5ff6f3 Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Hildenbrand <david@redhat.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kasan-dev@googlegroups.com Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com> Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Sven Joachim
|
1f2190d6b7 |
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS
Commit
|
||
Linus Torvalds
|
f837f0a3c9 |
A couple of SME updates for recent fixes (one of which went to stable):
reverting the flushing of the SME hardware state along with the thread flushing and making sure we have the correct vector length before reallocating. An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs" is 0 (the spec reports the number of IDs in the mapping range minus 1). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmTD40YACgkQa9axLQDI XvGmrw/+LSbXPWdBR4d4NnEOuw2YpD7jZ9DosfrtTUm5ca+gnQzLr+6Z9ysVOMX1 jzEEVMacFHidpY3cSl9waakl/SKHyu6yPFVkKONWz0iFGbqY9w1RWvCQb7APHWUe +aaav0GQU/WfnaOGfipuw5mcMpZT4NUTQK3EPZ4C++YvaN4uQiEzivNLmaHkQTqV DwY/tUf3AgbEslfV5SO97eXjuZ+TO1DANaI+wdVrHd1k5Zcq+XYIyw+sbTEdUJOx KBuK5SjfovNU8x7sg5i1aTBFVR3/sPlPrc0ueGYZsSn3/mWNQHOu/Iy3HYIdFPVM P16udTKruXFZsJCLUeykf9DD4d/WnV7wmKZOZgtDTmHUu45CKsZawYC+cVIkNAIx kUnEZM+GcLdMY7Ry2oyeeb/deFK6QEt8GfbKfqNubYn/MKvNabTGimKze2gk1cQR w7s/WWDN0finRJVy9SZrKvB3NbTw28aUZ+zDd1MzbSQncRtn0mZ2O06muxAbrP+C OqgtG1VEmwc0mWs8A79GQ9UBY4NCVCdl49bFTRBlot3eyLWu8nZyDzS6XELqB9/n Q5j7SOmj4CiOLfJGeTKNKs5cGf1mm2NUs8hpdEOaCEa0+rkAgfLsUnwDtMmHwQZ8 sHSsRwf4BR1KexfCpehqoic8XhOA9IjrDMQAx710cbQeLYiJ5iA= =qoWG -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - A couple of SME updates for recent fixes (one of which went to stable): reverting the flushing of the SME hardware state along with the thread flushing and making sure we have the correct vector length before reallocating. - An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs" is 0 (the spec reports the number of IDs in the mapping range minus 1). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info() arm64/sme: Set new vector length before reallocating arm64/fpsimd: Don't flush SME register hardware state along with thread |
||
Mark Brown
|
05d881b85b |
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline.
Fixes:
|
||
|
Mark Brown
|
3421ddbe6d |
arm64/fpsimd: Don't flush SME register hardware state along with thread
We recently changed the fpsimd thread flush to flush the physical SME
state as well as the thread state for the current thread. Unfortunately
this leads to intermittent corruption in interaction with the lazy
FPSIMD register switching. When under heavy load such as can be
triggered by the startup phase of fp-stress it is possible that the
current thread may not be scheduled prior to returning to userspace, and
indeed we may end up returning to the last thread that was scheduled on
the PE without ever exiting the kernel to any other task. If that
happens then we will not reload the register state from memory, leading
to loss of any SME register state.
Since this was purely an attempt to defensively close off potential
problems revert the change.
Fixes:
|
||
|
Linus Torvalds
|
269f4a4b85 |
ARM:
* Avoid pKVM finalization if KVM initialization fails
* Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
* Handle MMU notifiers correctly for non hugepage-aligned memslots
* Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
* Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
* Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
* Uphold RES0 sysreg behavior when emulating older PMU versions
* Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
s390:
* Two fixes for asynchronous destroy
x86 fixes will come early next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmS9WpwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOhTAf9EsrnrDK2U0Q1wIGZCh/3d662yslF
Kh0GidZ62w4P1O4q19lFhJ5ixVdHJjGaNrYGZm77yAi0UaYzx4wvkohdaDhIdeMg
3do2uo6/iGU5m24BaVIXlSr8V6KDsMw0UvCAjxFWNvCzpR/7tpLOteXFS9rZQ+1N
jfvoVKqE6LfgJ5IZiVdhIdEOxCf/QuQD/WdZ7fib8ngkY3dETi03MkATFKchtIzx
j5aWruVHQlmb5ukZzHmmNuF7Yf6c1Bs+Rt6JFjyL+DxbtPBJmHP4TepYCDS4UqIm
kkxrsqiTde13jQN7vDWzfzdpLQPIGV9OnvGWQoR4dyKfDlqSxJJyhXPuBw==
=Mkzl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early
boot failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer
controls have UNKNOWN behavior under nested virt
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
BUG in cpu hotplug resulting from per-CPU accessor sanity checking
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names,
ensuring the tracepoints pretty-print the sysreg
s390:
- Two fixes for asynchronous destroy
x86 fixes will come early next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix index value of replaced ASCE
KVM: s390: pv: simplify shutdown and fix race
KVM: arm64: Fix the name of sys_reg_desc related to PMU
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
KVM: arm64: Add missing BTI instructions
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
|
||
Paolo Bonzini
|
675a15f4db |
KVM/arm64 fixes for 6.5, part #1
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZLWvCAAKCRCivnWIJHzd
FvATAQDRFeGjnaEnnq2yufHNRcWeMEUgKSg153LUWYaVKYZMOAD+PfbXmCpZPuz3
5nee77NrjrPHKMm38zMalABuK1qJFQM=
=A7d0
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.5, part #1
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
|
||
|
Linus Torvalds
|
d192f53825 |
arm64 fixes for -rc3
- Fix saving of SME state after SVE vector length is changed - Fix sparse warnings for missing vDSO function prototypes - Fix hibernation resume path when kfence is enabled - Fix field names for the HFGxTR_EL2 register -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmS6YxAQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNE+HB/9Jepme+pnScRs5b91+fA6NUYENIk/VkkHo sG8IVz44+ME53fX20scZRHZhqlecWJ4z59T3jpPvTAvUUq1ZV2J/l4sKqGfKsgQt Mqvd8vZ66dQn7mDA7ENBhax0V0YuYtsshQ4jHgIYvxNi+Ye1nqyLiziFGUhZNpco E/YdQuxcx7nAKA5a467NQZD9YRgpgwZLLyxYs2/dJaDCOqlN05Azi2RqaDhHOVtv ycu+PBG5SoILJoNxdBXWA5o6eE/0zwkeiWNmHYDpCe7M1J7UcwfE1i/EJ5eihXKt XrCWbMQJe9GyS9GVWv7Ywjmuoapp4ZnzNsXt+lUw/lj4/uXOnLg9 =MjJh -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I've picked up a handful of arm64 fixes while Catalin's been away, so here they are. Below is the usual summary, but we have basically have two cleanups, a fix for an SME crash and a fix for hibernation: - Fix saving of SME state after SVE vector length is changed - Fix sparse warnings for missing vDSO function prototypes - Fix hibernation resume path when kfence is enabled - Fix field names for the HFGxTR_EL2 register" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes arm64: vdso: Clear common make C=2 warnings arm64: mm: Make hibernation aware of KFENCE arm64: Fix HFGxTR_EL2 field naming |
||
|
Mark Brown
|
d4d5be94a8 |
arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes
When we reconfigure the SVE vector length we discard the backing storage
for the SVE vectors and then reallocate on next SVE use, leaving the SME
specific state alone. This means that we do not enable SME traps if they
were already disabled. That means that userspace code can enter streaming
mode without trapping, putting the task in a state where if we try to save
the state of the task we will fault.
Since the ABI does not specify that changing the SVE vector length disturbs
SME state, and since SVE code may not be aware of SME code in the process,
we shouldn't simply discard any ZA state. Instead immediately reallocate
the storage for SVE, and disable SME if we change the SVE vector length
while there is no SME state active.
Disabling SME traps on SVE vector length changes would make the overall
code more complex since we would have a state where we have valid SME state
stored but might get a SME trap.
Fixes:
|
||
Zhen Lei
|
71e06e1ace |
arm64: vdso: Clear common make C=2 warnings
make C=2 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- xxx.o When I use the command above to do a 'make C=2' check on any object file, the following warnings are always output: CHECK arch/arm64/kernel/vdso/vgettimeofday.c arch/arm64/kernel/vdso/vgettimeofday.c:9:5: warning: symbol '__kernel_clock_gettime' was not declared. Should it be static? arch/arm64/kernel/vdso/vgettimeofday.c:15:5: warning: symbol '__kernel_gettimeofday' was not declared. Should it be static? arch/arm64/kernel/vdso/vgettimeofday.c:21:5: warning: symbol '__kernel_clock_getres' was not declared. Should it be static? Therefore, the declaration of the three functions is added to eliminate these common warnings to provide a clean output. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20230713115831.777-1-thunder.leizhen@huawei.com Signed-off-by: Will Deacon <will@kernel.org> |
||
Nikhil V
|
a8bd38dbc5 |
arm64: mm: Make hibernation aware of KFENCE
In the restore path, swsusp_arch_suspend_exit uses copy_page() to over-write memory. However, with features like KFENCE enabled, there could be situations where it may have marked some pages as not valid, due to which it could be reported as invalid accesses. Consider a situation where page 'P' was part of the hibernation image. Now, when the resume kernel tries to restore the pages, the same page 'P' is already in use in the resume kernel and is kfence protected, due to which its mapping is removed from linear map. Since restoring pages happens with the resume kernel page tables, we would end up accessing 'P' during copy and results in kernel pagefault. The proposed fix tries to solve this issue by marking PTE as valid for such kfence protected pages. Co-developed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Nikhil V <quic_nprakash@quicinc.com> Link: https://lore.kernel.org/r/20230713070757.4093-1-quic_nprakash@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> |
||
Alexander Duyck
|
a3f25d614b |
bpf, arm64: Fix BTI type used for freplace attached functions
When running an freplace attached bpf program on an arm64 system w were
seeing the following issue:
Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI
After a bit of work to track it down I determined that what appeared to be
happening is that the 'bti c' at the start of the program was somehow being
reached after a 'br' instruction. Further digging pointed me toward the
fact that the function was attached via freplace. This in turn led me to
build_plt which I believe is invoking the long jump which is triggering
this error.
To resolve it we can replace the 'bti c' with 'bti jc' and add a comment
explaining why this has to be modified as such.
Fixes:
|
||
Xiang Chen
|
9d2a55b403 |
KVM: arm64: Fix the name of sys_reg_desc related to PMU
For those PMU system registers defined in sys_reg_descs[], use macro PMU_SYS_REG() / PMU_PMEVCNTR_EL0 / PMU_PMEVTYPER_EL0 to define them, and later two macros call macro PMU_SYS_REG() actually. Currently the input parameter of PMU_SYS_REG() is another macro which is calculation formula of the value of system registers, so for example, if we want to "SYS_PMINTENSET_EL1" as the name of sys register, actually the name we get is as following: (((3) << 19) | ((0) << 16) | ((9) << 12) | ((14) << 8) | ((1) << 5)) The name of system register is used in some tracepoints such as trace_kvm_sys_access(), if not set correctly, we need to analyze the inaccurate name to get the exact name (which also is inconsistent with other system registers), and also the inaccurate name occupies more space. To fix the issue, use the name as a input parameter of PMU_SYS_REG like MTE_REG or EL2_REG. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1689305920-170523-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
Oliver Upton
|
6d4f9236cd |
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
The PMU event ID varies from 10 to 16 bits, depending on the PMU version. If the PMU only supports 10 bits of event ID, bits [15:10] of the evtCount field behave as RES0. While the actual PMU emulation code gets this right (i.e. RES0 bits are masked out when programming the perf event), the sysreg emulation writes an unmasked value to the in-memory cpu context. The net effect is that guest reads and writes of PMEVTYPER<n>_EL0 will see non-RES0 behavior in the reserved bits of the field. As it so happens, kvm_pmu_set_counter_event_type() already writes a masked value to the in-memory context that gets overwritten by access_pmu_evtyper(). Fix the issue by removing the unnecessary (and incorrect) register write in access_pmu_evtyper(). Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com> Link: https://lore.kernel.org/r/20230713221649.3889210-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
Marc Zyngier
|
b321c31c9b |
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Marc Zyngier
|
55b87b7499 |
arm64: Fix HFGxTR_EL2 field naming
The HFGxTR_EL2 fields do not always follow the naming described
in the spec, nor do they match the name of the register they trap
in the rest of the kernel.
It is a bit sad that they were written by hand despite the availability
of a machine readable version...
Fixes:
|
||
Mostafa Saleh
|
dcf89d1111 |
KVM: arm64: Add missing BTI instructions
Some bti instructions were missing from commit |
||
|
Oliver Upton
|
df6556adf2 |
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
Userspace is allowed to select any PAGE_SIZE aligned hva to back guest
memory. This is even the case with hugepages, although it is a rather
suboptimal configuration as PTE level mappings are used at stage-2.
The arm64 page aging handlers have an assumption that the specified
range is exactly one page/block of memory, which in the aforementioned
case is not necessarily true. All together this leads to the WARN() in
kvm_age_gfn() firing.
However, the WARN is only part of the issue as the table walkers visit
at most a single leaf PTE. For hugepage-backed memory in a memslot that
isn't hugepage-aligned, page aging entirely misses accesses to the
hugepage beyond the first page in the memslot.
Add a new walker dedicated to handling page aging MMU notifiers capable
of walking a range of PTEs. Convert kvm(_test)_age_gfn() over to the new
walker and drop the WARN that caught the issue in the first place. The
implementation of this walker was inspired by the test_clear_young()
implementation by Yu Zhao [*], but repurposed to address a bug in the
existing aging implementation.
Cc: stable@vger.kernel.org # v5.15
Fixes:
|
||
Arnd Bergmann
|
7d8b31b73c |
tracing: arm64: Avoid missing-prototype warnings
These are all tracing W=1 warnings in arm64 allmodconfig about missing prototypes: kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro totypes] kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes] kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes] kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes] kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes] kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes] arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes] arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes] arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes] Move the declarations to an appropriate header where they can be seen by the caller and callee, and make sure the headers are included where needed. Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Florent Revest <revest@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Marc Zyngier
|
970dee09b2 |
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
Since |
||
Sudeep Holla
|
fa729bc7c9 |
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
Currently there is no synchronisation between finalize_pkvm() and
kvm_arm_init() initcalls. The finalize_pkvm() proceeds happily even if
kvm_arm_init() fails resulting in the following warning on all the CPUs
and eventually a HYP panic:
| kvm [1]: IPA Size Limit: 48 bits
| kvm [1]: Failed to init hyp memory protection
| kvm [1]: error initializing Hyp mode: -22
|
| <snip>
|
| WARNING: CPU: 0 PID: 0 at arch/arm64/kvm/pkvm.c:226 _kvm_host_prot_finalize+0x30/0x50
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0 #237
| Hardware name: FVP Base RevC (DT)
| pstate: 634020c5 (nZCv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
| pc : _kvm_host_prot_finalize+0x30/0x50
| lr : __flush_smp_call_function_queue+0xd8/0x230
|
| Call trace:
| _kvm_host_prot_finalize+0x3c/0x50
| on_each_cpu_cond_mask+0x3c/0x6c
| pkvm_drop_host_privileges+0x4c/0x78
| finalize_pkvm+0x3c/0x5c
| do_one_initcall+0xcc/0x240
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x100/0x16c
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
| Failed to finalize Hyp protection: -22
| dtb=fvp-base-revc.dtb
| kvm [95]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:540!
| kvm [95]: nVHE call trace:
| kvm [95]: [<ffff800081052984>] __kvm_nvhe_hyp_panic+0xac/0xf8
| kvm [95]: [<ffff800081059644>] __kvm_nvhe_handle_host_mem_abort+0x1a0/0x2ac
| kvm [95]: [<ffff80008105511c>] __kvm_nvhe_handle_trap+0x4c/0x160
| kvm [95]: [<ffff8000810540fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4
| kvm [95]: ---[ end nVHE call trace ]---
| kvm [95]: Hyp Offset: 0xfffe8db00ffa0000
| Kernel panic - not syncing: HYP panic:
| PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800
| FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000
| VCPU:0000000000000000
| CPU: 3 PID: 95 Comm: kworker/u16:2 Tainted: G W 6.4.0 #237
| Hardware name: FVP Base RevC (DT)
| Workqueue: rpciod rpc_async_schedule
| Call trace:
| dump_backtrace+0xec/0x108
| show_stack+0x18/0x2c
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| panic+0x138/0x33c
| nvhe_hyp_panic_handler+0x100/0x184
| new_slab+0x23c/0x54c
| ___slab_alloc+0x3e4/0x770
| kmem_cache_alloc_node+0x1f0/0x278
| __alloc_skb+0xdc/0x294
| tcp_stream_alloc_skb+0x2c/0xf0
| tcp_sendmsg_locked+0x3d0/0xda4
| tcp_sendmsg+0x38/0x5c
| inet_sendmsg+0x44/0x60
| sock_sendmsg+0x1c/0x34
| xprt_sock_sendmsg+0xdc/0x274
| xs_tcp_send_request+0x1ac/0x28c
| xprt_transmit+0xcc/0x300
| call_transmit+0x78/0x90
| __rpc_execute+0x114/0x3d8
| rpc_async_schedule+0x28/0x48
| process_one_work+0x1d8/0x314
| worker_thread+0x248/0x474
| kthread+0xfc/0x184
| ret_from_fork+0x10/0x20
| SMP: stopping secondary CPUs
| Kernel Offset: 0x57c5cb460000 from 0xffff800080000000
| PHYS_OFFSET: 0x80000000
| CPU features: 0x00000000,1035b7a3,ccfe773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: HYP panic:
| PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800
| FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000
| VCPU:0000000000000000 ]---
Fix it by checking for the successfull initialisation of kvm_arm_init()
in finalize_pkvm() before proceeding any futher.
Fixes:
|
||
|
Marc Zyngier
|
fe769e6c1f |
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
It recently appeared that, when running VHE, there is a notable
difference between using CNTKCTL_EL1 and CNTHCTL_EL2, despite what
the architecture documents:
- When accessed from EL2, bits [19:18] and [16:10] of CNTKCTL_EL1 have
the same assignment as CNTHCTL_EL2
- When accessed from EL1, bits [19:18] and [16:10] are RES0
It is all OK, until you factor in NV, where the EL2 guest runs at EL1.
In this configuration, CNTKCTL_EL11 doesn't trap, nor ends up in
the VNCR page. This means that any write from the guest affecting
CNTHCTL_EL2 using CNTKCTL_EL1 ends up losing some state. Not good.
The fix it obvious: don't use CNTKCTL_EL1 if you want to change bits
that are not part of the EL1 definition of CNTKCTL_EL1, and use
CNTHCTL_EL2 instead. This doesn't change anything for a bare-metal OS,
and fixes it when running under NV. The NV hypervisor will itself
have to work harder to merge the two accessors.
Note that there is a pending update to the architecture to address
this issue by making the affected bits UNKNOWN when CNTKCTL_EL1 is
used from EL2 with VHE enabled.
Fixes:
|
||
Florent Revest
|
8c3526fb86 |
arm64: ftrace: Add direct call trampoline samples support
The ftrace samples need per-architecture trampoline implementations to save and restore argument registers around the calls to my_direct_func* and to restore polluted registers (eg: x30). These samples also include <asm/asm-offsets.h> which, on arm64, is not necessary and redefines previously defined macros (resulting in warnings) so these includes are guarded by !CONFIG_ARM64. Link: https://lkml.kernel.org/r/20230427140700.625241-3-revest@chromium.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
8066178f53 |
Tracing fixes for 6.5:
- Fix bad git merge of #endif in arm64 code A merge of the arm64 tree caused #endif to go into the wrong place - Fix crash on lseek of write access to tracefs/error_log Opening error_log as write only, and then doing an lseek() causes a kernel panic, because the lseek() handle expects a "seq_file" to exist (which is not done on write only opens). Use tracing_lseek() that tests for this instead of calling the default seq lseek handler. - Check for negative instead of -E2BIG for error on strscpy() returns Instead of testing for -E2BIG from strscpy(), to be more robust, check for less than zero, which will make sure it catches any error that strscpy() may someday return. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZKbQUhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qpWaAP9zQ1eLQSfMt0dHH01OBSJvc2mMd4QJ VZtWZ+xTSvk+4gD/axDzDS7Qisfrrli+1oQSPwVik2SXiz0SPJqJ25m9zw4= =xMlg -----END PGP SIGNATURE----- Merge tag 'trace-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix bad git merge of #endif in arm64 code A merge of the arm64 tree caused #endif to go into the wrong place - Fix crash on lseek of write access to tracefs/error_log Opening error_log as write only, and then doing an lseek() causes a kernel panic, because the lseek() handle expects a "seq_file" to exist (which is not done on write only opens). Use tracing_lseek() that tests for this instead of calling the default seq lseek handler. - Check for negative instead of -E2BIG for error on strscpy() returns Instead of testing for -E2BIG from strscpy(), to be more robust, check for less than zero, which will make sure it catches any error that strscpy() may someday return. * tag 'trace-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/boot: Test strscpy() against less than zero for error arm64: ftrace: fix build error with CONFIG_FUNCTION_GRAPH_TRACER=n tracing: Fix null pointer dereference in tracing_err_log_open() |
||
|
Linus Torvalds
|
7b82e90411 |
asm-generic updates for 6.5
These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync
and are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type
checking, forcing the use of pointers
-----BEGIN PGP SIGNATURE-----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=S/he
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
|
||
|
Arnd Bergmann
|
931a2ca6a5 |
arm64: ftrace: fix build error with CONFIG_FUNCTION_GRAPH_TRACER=n
It appears that a merge conflict ended up hiding a newly added constant
in some configurations:
arch/arm64/kernel/entry-ftrace.S: Assembler messages:
arch/arm64/kernel/entry-ftrace.S:59: Error: undefined symbol FTRACE_OPS_DIRECT_CALL used as an immediate value
FTRACE_OPS_DIRECT_CALL is still used when CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
is enabled, even if CONFIG_FUNCTION_GRAPH_TRACER is disabled, so change the
ifdef accordingly.
Link: https://lkml.kernel.org/r/20230623152204.2216297-1-arnd@kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Fixes:
|
||
|
Linus Torvalds
|
04f2933d37 |
Scope-based Resource Management infrastructure
These are the first few patches in the Scope-based Resource Management series that introduce the infrastructure but not any conversions as of yet. Adding the infrastructure now allows multiple people to start using them. Of note is that Sparse will need some work since it doesn't yet understand this attribute and might have decl-after-stmt issues -- but I think that's being worked on. -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEv3OU3/byMaA0LqWJdkfhpEvA5LoFAmSZehYVHHBldGVyekBp bmZyYWRlYWQub3JnAAoJEHZH4aRLwOS6uC0P/0pduumvCE+osm869VOroHeVqz6B B36oqJlD1uqIA8JWiNW8TbpUUqTvU0FyW1jU1YnUdol5Kb3XH7APQIayGj2HM+Mc kMyHc4/ICxBzRI7STiBtCEbHIwYAfuibCAfuq7QP4GDw4vHKvUC7BUUaUdbQSey0 IyUsvgPqLRL1KW3tb2z7Zfz6Oo/f0A/+viTiqOKNxSctXaD7TOEUpIZ/RhIgWbIV as65sgzLD/87HV9LbtTyOQCxjR5lpDlTaITapMfgwC9bQ8vQwjmaX3WETIlUmufl 8QG3wiPIDynmqjmpEeY+Cyjcu/Gbz/2XENPgHBd6g2yJSFLSyhSGcDBAZ/lFKlnB eIJqwIFUvpMbAskNxHooNz1zHzqHhOYcCSUITRk6PG8AS1HOD/aNij4sWHMzJSWU R3ZUOEf5k6FkER3eAKxEEsJ2HtIurOVfvFXwN1e0iCKvNiQ1QdP74LddcJqsrTY6 ihXsfVbtJarM9dakuWgk3fOj79cx3BQEm82002vvNzhRRUB5Fx7v47lyB5mAcYEl Al9gsLg4mKkVNiRh/tcelchKPp9WOKcXFEKiqom75VNwZH4oa+KSaa4GdDUQZzNs 73/Zj6gPzFBP1iLwqicvg5VJIzacKuH59WRRQr1IudTxYgWE67yz1OVicplD0WaR l0tF9LFAdBHUy8m/ =adZ8 -----END PGP SIGNATURE----- Merge tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue Pull scope-based resource management infrastructure from Peter Zijlstra: "These are the first few patches in the Scope-based Resource Management series that introduce the infrastructure but not any conversions as of yet. Adding the infrastructure now allows multiple people to start using them. Of note is that Sparse will need some work since it doesn't yet understand this attribute and might have decl-after-stmt issues" * tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue: kbuild: Drop -Wdeclaration-after-statement locking: Introduce __cleanup() based infrastructure apparmor: Free up __cleanup() name dmaengine: ioat: Free up __cleanup() name |
||
SeongJae Park
|
24be4d0b46 |
arch/arm64/mm/fault: Fix undeclared variable error in do_page_fault()
Commit |
||
|
Linus Torvalds
|
e8069f5a8e |
ARM64:
* Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the stage-2
fault path.
* Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
* Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
* Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
* Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
* Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
* Ensure timer IRQs are consistently released in the init failure
paths.
* Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
* Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
RISC-V:
* Redirect AMO load/store misaligned traps to KVM guest
* Trap-n-emulate AIA in-kernel irqchip for KVM guest
* Svnapot support for KVM Guest
s390:
* New uvdevice secret API
* CMM selftest and fixes
* fix racy access to target CPU for diag 9c
x86:
* Fix missing/incorrect #GP checks on ENCLS
* Use standard mmu_notifier hooks for handling APIC access page
* Drop now unnecessary TR/TSS load after VM-Exit on AMD
* Print more descriptive information about the status of SEV and SEV-ES during
module load
* Add a test for splitting and reconstituting hugepages during and after
dirty logging
* Add support for CPU pinning in demand paging test
* Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
* Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage
recovery threads (because nx_huge_pages=off can be toggled at runtime)
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups, fixes and comments
Generic:
* Miscellaneous bugfixes and cleanups
Selftests:
* Generate dependency files so that partial rebuilds work as expected
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSgHrIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroORcAf+KkBlXwQMf+Q0Hy6Mfe0OtkKmh0Ae
6HJ6dsuMfOHhWv5kgukh+qvuGUGzHq+gpVKmZg2yP3h3cLHOLUAYMCDm+rjXyjsk
F4DbnJLfxq43Pe9PHRKFxxSecRcRYCNox0GD5UYL4PLKcH0FyfQrV+HVBK+GI8L3
FDzUcyJkR12Lcj1qf++7fsbzfOshL0AJPmidQCoc6wkLJpUEr/nYUqlI1Kx3YNuQ
LKmxFHS4l4/O/px3GKNDrLWDbrVlwciGIa3GZLS52PZdW3mAqT+cqcPcYK6SW71P
m1vE80VbNELX5q3YSRoOXtedoZ3Pk97LEmz/xQAsJ/jri0Z5Syk0Ok0m/Q==
=AMXp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
|
||
|
Linus Torvalds
|
e3c2b10d6f |
Fix memory corruption (overwriting the kmalloc redzone) when saving the
SVE state while in SVE streaming mode. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmSgR1oACgkQa9axLQDI XvGL3g/+ITCIqJZWSFzuMVbQ6cfYX1P7MKyII3qE7DnSql7nz0Ebs0WcL1Edj73A 0t7bVhxfsLjXW1xE26jt+7LzD6F4u9OKWKlDr3fDbInpi1H0t7dvbLCxETZzcTl0 DiGdNfd4blExQ0ZSj8bA4diLEdjQyO/MoxOH6w0DIUsvDQ8irHN65IP1Xe2hXvzZ p0NFgYXt8n9XiAUVB0DOE92oM4562qmXn5AXHTvtcuZETp8WxntYYbuhqE0hN4hY 7C1SoHdZFErDecD9EyQTHqg/7DKTd2BkeX9GMSHvG33mtc55AYavO8i7ObFOEpiU b6eWyugWaDcpKiC4VBcc30/7U7km3P1CrX3yzcD38XVlHU/m4L9sVP5++U9ikHoY tUNQul/Bvo5hEgKrRoXqcHSlV+PjMehgM1B4ed79n6TzKiCOoKZi/PBjwGb0ss1U hQfN6w1nZCKoj9lI2m2hV/hYRj1mNra5xXh2FvMIIPXsrGVeQJDkGZwQyRu5Ynxm DC8Jw+TEYcp5D9W8W2zijeU4jPl+7jD424ElWR41qWn4Aet+rTa2bcFQ+bApK7Dn 3Msw5zLS8FFl68Ve+tlt/W3rYCMD3tNN0JHq2pM4Ue2RbzKUxHRHc2v5IYAKFjvN WHcQeAD0e9W1U96TxMlJA470XNPujpVFxuphThRQBHIg981HKmI= =4gCK -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix memory corruption (overwriting the kmalloc redzone) when saving the SVE state while in SVE streaming mode" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: sme: Use STR P to clear FFR context field in streaming SVE mode |
||
|
Paolo Bonzini
|
cc744042d9 |
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZJWrhwAKCRCivnWIJHzd
Fs07AP9xliv5yIoQtRgPZXc0QDPyUm7zg8f5KDgqCVJtyHXcvAEAmmerBr39nbPc
XoMXALKx6NGt836P0C+bhvRcHdFPGwE=
=c/Xh
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
|
||
|
Linus Torvalds
|
5d95ff84e6 |
This update includes the following changes:
API: - Add linear akcipher/sig API. - Add tfm cloning (hmac, cmac). - Add statesize to crypto_ahash. Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA. - Replace LFSR with SHA3-256 in jitter. - Add interface for gathering of raw entropy in jitter. Drivers: - Fix race on data_avail and actual data in hwrng/virtio. - Add hash and HMAC support in starfive. - Add RSA algo support in starfive. - Add support for PCI device 0x156E in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmSdECcACgkQxycdCkmx i6dW3g//a4DR6aaqYF8pU4svAzO56a0Plx3DVHUiJ4ygRB7xOzrQqXjCren6wY2a LFuetwxebAhIAPsC79vI+3j8VAIlU9cNVqOxBIJHGY7wFO4m1AjqBjlealzqLrth +nEIeUibqLeRw7imOO4adzSsKuSQgyU5rPtKWfrGqqI3RhuMgfWroCtmJ82jmq5l uMZgB+aGGkzyXztxubHRPeJ3nOFEzo95SscpJ43lOjMcURRBhEa+20jXDhUGwpI7 9ycFV31AW+tfkIprAcliiIzZuwIbzlCkte6AxjAVsN100T/wh9JS1Y+uf1P0oZ9y AUQQKyc8/QpSkzHZPTncat5P6zta28r8Q5neCvEEEGGuOE8Oc6kb0Os+RE5ANMU4 2A/zrKGOMIWeEWwXGc51xT3gxyl/Rn5wLw1pW7Lm4d5osGT9jiVXx/g66hKLpagJ jegI6CqgvUajkRNi7JPVnSAauu0Ay8O6pU37/8gLOXNGVZBqONpRimk9qB05LNSF QYzM2sgYv1tQEmjnG8jLhF5Z8brnqYTv2TZwBX43W10EDQNqUYUDff9Flean5xCb +2mxJc81rgtUffnMXyYvQwKLhVKoLpeLR6Ts455S5aP06WAfoyEJyYTA/LHG24GX H2HdS9g5y/K15k9yygMWaXgAx7O7MjM9gEa2VQakhnByj/eQM0s= =rOLu -----END PGP SIGNATURE----- Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ... |
||
|
Linus Torvalds
|
cccf0c2ee5 |
Tracing updates for 6.5:
- Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZJy6ixQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnzRAPsEI2YgjaJSHnuPoGRHbrNil6pq66wY LYaLizGI4Jv9BwEAqdSdcYcMiWo1SFBAO8QxEDM++BX3zrRyVgW8ahaTNgs= =TF0C -----END PGP SIGNATURE----- Merge tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. * tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix warnings when building htmldocs for function graph retval riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing/boot: Replace strlcpy with strscpy tracing/timerlat: Add user-space interface tracing/osnoise: Skip running osnoise if all instances are off tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable ftrace: Show all functions with addresses in available_filter_functions_addrs selftests/ftrace: Add funcgraph-retval test case LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex function_graph: Support recording and printing the return value of function fgraph: Add declaration of "struct fgraph_ret_regs" |
||
|
Linus Torvalds
|
0873694a33 |
ARM: SoC defconfig changes for 6.5
The arm64 defconfig file gets the usual updates to enable addition device drivers as well as the sparx5 and realtek SoC platforms. For arm32, there are only a couple of cleanup patches for imx, renesas and rockchips. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScrd0ACgkQYKtH/8kJ Uif+eRAAk8ZrKNTdzfIhRN0VviQ/AT6M2xwZUhewRqxtePP42Gd+nqINzTF9z0FA NKK8YtrLH5Vp/jqYoRCRi6VQfR/LmALsY/GRh4JZ4RyhIM535mOuxL1Eg1phH1h3 ysbBW3yKICFE1Fuun733jCrZf7O6XlUtHgajDJJ0zAMO5QLWooxJTjGVQ1qVl9hs HBH2eZUed+kQNh0iAeafKy7ydYHOV8QvFSXSrdPkqSJScANb5c4n30dM6oWiOpZH tG66YeKOGjc3CR6JC5sl914GhPcqW1Lhtfovw5DA/MZkIXT5ErWKoht2loUUgrDP PsiMA5/IeNJWBmilWs2VziScBWgvtC+X5UHjeUE9vva+i6DCQHTay3UsbSmgjGrx pRiz7I4mI9V3msYNQGOCILz6pa7NDBVR90zX2Adwq1TXM2NP/69oDk1RtJ7nlGtG /EBFwR/5n/NRV1/kJ4iVYi0TMsqeKqSxO7csP5jpODV3Gc5JEnXKR+18zrGSSjV1 CUp+lOsQdfU1XAZB49b9i8ZMT4qlsZx1yhiDVzcXoTPLOAQa7Mn/JBBTOvwWmncI 2lDLMR0jqvPCp2gxSxv3EdN9k9XzO7U1++49+d7l0C2h0AoaJHUYFjjhMUmBGotI BSNK4thza0JXlSaPVefXcY9v1RHdO51guxfjb6rz4/+DSClNsKo= =dufW -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Arnd Bergmann: "The arm64 defconfig file gets the usual updates to enable addition device drivers as well as the sparx5 and realtek SoC platforms. For arm32, there are only a couple of cleanup patches for imx, renesas and rockchips" * tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits) arm64: defconfig: Enable Rockchip I2S TDM and ES8316 drivers arm64: defconfig: update RK8XX MFD config ARM: multi_v7_defconfig: update MFD_RK808 name arm64: defconfig: Enable UBIFS arm64: defconfig: enable drivers for Verdin AM62 arm64: defconfig: Build SM6115 display and GPU clock controller drivers arm64: defconfig: Build display clock controller driver for QCM2290 arm64: defconfig: Build interconnect driver for QCM2290 arm64: defconfig: Build Global Clock Controller driver for QCM2290 arm64: defconfig: Build MSM power manager driver arm64: defconfig: Enable sc828x0xp lpasscc clock controller arm64: defconfig: Enable the TI SN65DSI83 driver arm64: defconfig: Enable Renesas MTU3a counter config arm64: defconfig: enable Mediatek PMIC key arm64: defconfig: enable MT6357 regulator ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config arm64: defconfig: Enable ipq6018 apss clock and PLL controller arm64: defconfig: Enable ARCH_SPARX5 and ARCH_REALTEK arm64: defconfig: enable FSA4480 driver as module ARM: shmobile: defconfig: Refresh for v6.4-rc1 ... |
||
|
Linus Torvalds
|
a9025a5f16 |
ARM: New SoC support for 6.5
There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScqtkACgkQYKtH/8kJ Uifqyg//XgvZBxb/2GILYcThVgLoo1fYA9tG5M0LERY/aPiUwrCwIl5swGQXK4vK E3UBLsQURer4yEBRq7iB6RGbwa4Opjdy3yTkj6WSgEMPh6e6jGvmm+dJ7HuWeviS 8oeyo3Xar6tIF+A8xlBloHA4J6690FYB40McQzh8sWG5SE+id56S71NGnNW0kQTn wsul9BZcGVoyMYNBi/uXtOVUPy7jF3UBC3HJF9UOT7q77bCLjVc/aHmmnZ3zmbYA 2oX3X5hVJakFba6vnz+rjNlzuAoGXJPDdsKFxBysdsksac/TxqRIQGNe75DZZVgz ESTpt1QqjmCFw32HEzi8Ne22FOpzlBqUxBMznHPenpz1/om2ezs3q7ffuPqKvMaq PANuK++JKJaBChVMzJbn84Sr1fvO4ecGJpKZTFC6t6SqHQNQFJT6rfMHx01Xw2wW LjKfEBCR6zEXN0+FaaujgJ4y/9pH1VHPynrZJG9WEwPUEZb2kJ/2RMXjNpzOWKiB pWYV1oW2TqFKYKhFm/pjkbi6Rq76UwEi8fWWoGMkmeV3KZ/0GFauQhItu6mX3s7W uGnUQyrBzWzUoashYFuNtXKHYdwuWgOmG660BXHkyxwvqV96ICGEJ+97zGIBDj81 F8zLxEjPbsEZqGGSosAyk9oYC6eh7eK2V7xx+CUYLTuKZw13zNo= =zaVi -----END PGP SIGNATURE----- Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ... |
||
|
Linus Torvalds
|
6c1561fb90 |
ARM: SoC devicetree updates for 6.5
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
|
||
|
Linus Torvalds
|
1b722407a1 |
drm changes for 6.5-rc1:
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
||
Will Deacon
|
893b24181b |
arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
The FFR is a predicate register which can vary between 16 and 256 bits in size depending upon the configured vector length. When saving the SVE state in streaming SVE mode, the FFR register is inaccessible and so commit |
||
|
Linus Torvalds
|
9471f1f2f5 |
Merge branch 'expand-stack'
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
|
||
|
Linus Torvalds
|
3a8a670eee |
Networking changes for 6.5.
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
||
|
Linus Torvalds
|
77b1a7f7a0 |
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories. - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs. - Zhen Lei has enhanced kexec's ability to support two crash regions. - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries. - And the usual bunch of singleton patches in various places. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU= =F293 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
|
Linus Torvalds
|
6e17c6de3d |
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing. - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability. - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning. - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface. - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree. - Johannes Weiner has done some cleanup work on the compaction code. - David Hildenbrand has contributed additional selftests for get_user_pages(). - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code. - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code. - Huang Ying has done some maintenance on the swap code's usage of device refcounting. - Christoph Hellwig has some cleanups for the filemap/directio code. - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses. - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings. - John Hubbard has a series of fixes to the MM selftesting code. - ZhangPeng continues the folio conversion campaign. - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock. - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8. - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management. - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code. - Vishal Moola also has done some folio conversion work. - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh J0qXCzqaaN8+BuEyLGDVPaXur9KirwY= =B7yQ -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ... |
||
|
Linus Torvalds
|
6aeadf7896 |
Move the arm64 architecture documentation under Documentation/arch/. This
brings some order to the documentation directory, declutters the top-level directory, and makes the documentation organization more closely match that of the source. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmSbDsIPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Y+ksH/2Xqun1ipPvu66+bBdPIf8N9AVFatl2q3mt4 tgX3A4RH3Ejklb4GbRLOIP23PmCxt7LRv4P05ttw8VpTP3A+Cw1d1s2RxiXGvfDE j7IW6hrpUmVoDdiDCRGtjdIa7MVI5aAsj8CCTjEFywGi5CQe0Uzq4aTUKoxJDEnu GYVy2CwDNEt4GTQ6ClPpFx2rc4UZf/H2XqXsnod9ef8A5Nkt3EtgoS1hh3o1QZGA Mqx2HAOVS1tb6GUVUbVLCdj40+YjBLjXFlsH4dA+wsFFdUlZLKuTesdiAMg2X6eT E8C/6oRT+OiWbrnXUTJEn8z98Ds8VHn7D4n97O9bIQ+R9AFtmPI= =H/+D -----END PGP SIGNATURE----- Merge tag 'docs-arm64-move' of git://git.lwn.net/linux Pull arm64 documentation move from Jonathan Corbet: "Move the arm64 architecture documentation under Documentation/arch/. This brings some order to the documentation directory, declutters the top-level directory, and makes the documentation organization more closely match that of the source" * tag 'docs-arm64-move' of git://git.lwn.net/linux: perf arm-spe: Fix a dangling Documentation/arm64 reference mm: Fix a dangling Documentation/arm64 reference arm64: Fix dangling references to Documentation/arm64 dt-bindings: fix dangling Documentation/arm64 reference docs: arm64: Move arm64 documentation under Documentation/arch/ |
||
|
Linus Torvalds
|
bc6cb4d5bc |
Locking changes for v6.5:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
||
|
Linus Torvalds
|
ed3b7923a8 |
Scheduler changes for v6.5:
- Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of higher-frequency
SMT cores and lower-frequency non-SMT cores), under the old code
lower-priority CPUs pulled tasks from the higher-priority cores if
more than one SMT sibling was busy - resulting in many unnecessary
task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores with more
than one busy sibling and allows lower-priority CPUs to pull tasks, which
avoids superfluous migrations and lets lower-priority cores inspect all SMT
siblings for the busiest queue.
- Implement the 'runnable boosting' feature in the EAS balancer: consider CPU
contention in frequency, EAS max util & load-balance busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves other key
workloads unchanged.
- Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it
into the build_sched_topology() helper function and building
it dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
- Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations.
- Fix task_struct::saved_state handling.
- Fix various rq clock update bugs, unearthed by turning on the rq clock
debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger by
creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
- Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation
to (maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EWQA
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
|