Uwe Kleine-König pointed out we still have one resource leak in the mvebu
driver triggered on driver detach. Let's address it with a custom devm
action.
Fixes: 812d47889a ("gpio/mvebu: Use irq_domain_add_linear")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This allows to get rid of a call to pwmchip_remove() in the error path. There
is no .remove function for this driver, so this change fixes a resource leak
when a gpio-mvebu device is unbound.
Fixes: 757642f9a5 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make tps68470_gpio_output() call tps68470_gpio_set() for output-only pins
too, so that the initial value passed to gpiod_direction_output() is
honored for these pins too.
Fixes: 275b13a655 ("gpio: Add support for TPS68470 GPIOs")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
No core changes this time.
New drivers:
- Tegra234 support.
- Qualcomm IPQ5018 support.
- Intel Meteor Lake-S support.
- Qualcomm SDX75 subdriver.
- Qualcomm SPMI-based PM8953 support.
Improvements:
- Fix up support for GPIO3 on the AXP209.
- Push-pull drive configuration support for the AT91 PIO4.
- Fix misc non-urgent bugs in the AMD driver.
- Misc non-urgent improved error handling.
- Misc janitorial and minor improvements.
-----BEGIN PGP SIGNATURE-----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=MMUo
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been converted in
the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block
-----BEGIN PGP SIGNATURE-----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=3KNJ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, some improvements to the core code, lots of
different updates to existing GPIO drivers and some dt-bindings on
top.
There's nothing controversial in here and almost everything has been
in next for more than a week (95% a lot longer than this). The only
thing that has spent less time in next is a new driver so no risk of
regressions.
The single merge pulls in changes that remove all usage of global GPIO
numbers from arch/arm/mach-omap.
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers:
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down
delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been
converted in the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block"
* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
of: unittest: drop assertions for GPIO hog messages
gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
dt-bindings: gpio: gpio-vf610: Add parsing of hogs
gpio: lpc18xx: Remove unused of_gpio.h inclusion
gpio: xra1403: Remove unused of_gpio.h inclusion
gpio: mpc8xxx: Remove unused of_gpio.h inclusion
dt-bindings: gpio: Add Cirrus EP93xx
gpio: mpc8xxx: latch GPIOs state on module load when configured as output
selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
gpio: mlxbf3: Add gpio driver support
gpio: delay: Remove duplicative functionality
gpio: aggregator: Set up a parser of delay line parameters
gpio: aggregator: Support delay for setting up individual GPIOs
gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
dt-bindings: gpio: pca9570: add gpio-line-names property
gpiolib: remove unused gpio_cansleep()
gpio: tps65219: add GPIO support for TPS65219 PMIC
gpio: zynq: fix zynqmp_gpio not an immutable chip warning
gpio: davinci: make davinci_gpio_dev_pm_ops static
...
Another busy release for regmap with the second half fo the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of the
regmap-irq interfaces, the conversion is complete so the old interfaces
are removed. This means that even with the new features for the maple
tree cache we'd have a nice negative diffstat were it not for the
addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of an
API in the regmap-irq code for which the gpio-104-dio-48e driver was the
only user.
Highlights:
- The maple tree cache can now load in default values more efficiently,
and is capabale of syncing multiple registers in a single write
during cache sync.
- More KUnit coverage, including some coverage for raw I/O and a dummy
RAM backed cache to support it.
- Removal of several old interfaces in regmap-irq now all the users
have been modernised.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZj0cACgkQJNaLcl1U
h9BNdAf+Kjw+WbqDj/glPTAfrth5aPOyheq9stklzY3mE0E+AxAsHd2PrvYwn1Rt
jiAb96CqsVNP3WFVj6vmM/kfonE7xiBzPng2QtIWKJjxM/PYyLJZkElF6VqZz4cz
ftS4GMAWJadOvIMZgtCFOOujTaBoN0ik2ryZYofVvI8e98W89ifLvCv4aRiJ3Qn8
2R4Wk37JvZtIc2q5kaZ+wo+JIXVijlt7gU+9ZMT7BvJu1ot/KXY3Q3npfSK2Bv5u
qDkMWNZoy9kNd035E8rXt2OTzMlxgUu766wpg3YGU2Hqt15N0n5rpgLc2uB24niG
0yiCYbA2NT5J6+P+/VsE/VTBmJwK8w==
=E+Tk
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another busy release for regmap with the second half of the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of
the regmap-irq interfaces, the conversion is complete so the old
interfaces are removed. This means that even with the new features for
the maple tree cache we'd have a nice negative diffstat were it not
for the addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of
an API in the regmap-irq code for which the gpio-104-dio-48e driver
was the only user.
Highlights:
- The maple tree cache can now load in default values more
efficiently, and is capabale of syncing multiple registers
in a single write during cache sync
- More KUnit coverage, including some coverage for raw I/O
and a dummy RAM backed cache to support it
- Removal of several old interfaces in regmap-irq now all
users have been modernised"
* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
regmap: Allow reads from write only registers with the flat cache
regmap: Drop early readability check
regmap: Check for register readability before checking cache during read
regmap: Add test to make sure we don't sync to read only registers
regmap: Add a test case for write only registers
regmap: Add test that writes to write only registers are prevented
regmap: Add debugfs file for forcing field writes
regmap: Don't check for changes in regcache_set_val()
regmap: maple: Implement block sync for the maple tree cache
regmap: Provide basic KUnit coverage for the raw register I/O
regmap: Provide a ram backed regmap with raw support
regmap: Add missing cache_only checks
regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
regmap: Load register defaults in blocks rather than register by register
regmap: mmio: Allow passing an empty config->reg_stride
regmap-irq: Drop backward compatibility for inverted mask/unmask
regmap-irq: Minor adjustments to .handle_mask_sync()
regmap-irq: Remove support for not_fixed_stride
regmap-irq: Remove type registers
regmap-irq: Remove virtual registers
...
It seems there is no driver that requires custom IRQ chip
domain options. Drop the member and respective code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Up until commit 6a45b0e258 ("gpiolib: Introduce
gpiochip_irqchip_add_domain()") all irq_domains were allocated
by gpiolib itself and thus gpiolib also takes care of freeing it.
With gpiochip_irqchip_add_domain() a user of gpiolib can associate an
irq_domain with the gpio_chip. This irq_domain is not managed by
gpiolib and therefore must not be freed by gpiolib.
Fixes: 6a45b0e258 ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver now uses the generic request/release callbacks, so the custom
ones are no longer called. When building with -Woverride-init, gcc produces
a warning about the duplicate entries:
In file included from drivers/gpio/gpio-zynq.c:10:
include/linux/gpio/driver.h:621:43: error: initialized field overwritten [-Werror=override-init]
621 | .irq_request_resources = gpiochip_irq_reqres, \
| ^~~~~~~~~~~~~~~~~~~
drivers/gpio/gpio-zynq.c:611:9: note: in expansion of macro 'GPIOCHIP_IRQ_RESOURCE_HELPERS'
611 | GPIOCHIP_IRQ_RESOURCE_HELPERS,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/gpio/driver.h:621:43: note: (near initialization for 'zynq_gpio_level_irqchip.irq_request_resources')
621 | .irq_request_resources = gpiochip_irq_reqres, \
| ^~~~~~~~~~~~~~~~~~~
drivers/gpio/gpio-zynq.c:625:9: note: in expansion of macro 'GPIOCHIP_IRQ_RESOURCE_HELPERS'
625 | GPIOCHIP_IRQ_RESOURCE_HELPERS,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/gpio/driver.h:622:43: error: initialized field overwritten [-Werror=override-init]
622 | .irq_release_resources = gpiochip_irq_relres
| ^~~~~~~~~~~~~~~~~~~
Removing the old ones has no effect on the driver but avoids the warnings.
Fixes: f569143935 ("gpio: zynq: fix zynqmp_gpio not an immutable chip warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_gpio.h shouldn't be used in GPIO drivers. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_gpio.h shouldn't be used in GPIO drivers. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_gpio.h shouldn't be used in GPIO drivers. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Qoriq and related devices allow reading out state of GPIO set as output.
However, currently on driver's init, all outputs are configured as driven
low. So, any changes to GPIO confiuration will drive all pins (configured
as output) as output-low.
This patch latches state of output GPIOs before any GPIO configuration
takes place. This preserves any output settings done prior to loading
the driver (for example, by u-boot).
Signed-off-by: Michal Smulski <michal.smulski@ooma.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for the BlueField-3 SoC GPIO driver.
This driver configures and handles GPIO interrupts. It also enables a user
to manipulate certain GPIO pins via libgpiod tools or other kernel drivers.
The usables pins are defined via the "gpio-reserved-ranges" property.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that GPIO aggregator supports a delay line, drop the duplicative
functionality, i.e. the entire gpio-delay driver.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The aggregator mode can also handle properties of the platform,
that do not belong to the GPIO controller itself. One of such
a property is a signal delay line. Set up a parser to support it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In some cases the GPIO may require an additional delay after setting
its value. Add support for that into the GPIO forwarder code.
This will be fully enabled for use in the following changes.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
They stop the driver being used with ACPI PRP0001 and are something
I want to avoid being cut and paste into new drivers. Also include
mod_devicetable.h as we struct of_device_id is defined in there.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the missing check for platform_get_irq() and return error code
if it fails.
The returned error code will be dealed with in
builtin_platform_driver(sifive_gpio_driver) and the driver will not
be registered.
Fixes: f52d6d8b43 ("gpio: sifive: To get gpio irq offset from device tree data")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for TPS65219 PMICs GPIO interface.
3 GPIO pins:
- GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
- GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.
GPIO0 is statically configured as input or output prior to Linux boot.
it is used for MULTI_DEVICE_ENABLE function.
This setting is statically configured by NVM.
GPIO0 can't be used as a generic GPIO (specification Table 8-34).
It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.
Datasheet describes specific usage for non standard GPIO.
Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In case of gpio-regmap, IRQ chip is added by regmap-irq and associated with
GPIO chip by gpiochip_irqchip_add_domain(). The initialization flag was not
added in gpiochip_irqchip_add_domain(), causing gpiochip_to_irq() to return
-EPROBE_DEFER.
Fixes: 5467801f1f ("gpio: Restrict usage of GPIO chip irq members before initialization")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make the struct irq_chip const and flag it as IRQCHIP_IMMUTABLE,
call gpiochip_disable_irq() in the .irq_mask() callback and
gpiochip_enable_irq() in the .irq_unmask() callback to fix
"gpio gpiochip1: (zynqmp_gpio): not an immutable chip" warning.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch fixes the following sprse warnings:
drivers/gpio/gpio-davinci.c:695:1: sparse: warning: symbol 'davinci_gpio_dev_pm_ops' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSGPiIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxWcH/AoUClfYYbYZYaoI
spQiFQiZEdniE3W/36GKtfJok4ur1Aogb/q99KvfQxFGkH+aLbTgXxJlTqrlmfWk
Kj4uVUecQl2OHOuEM6AVFyK6S4xdTjWS7TKMGIVe4LDQCAsFidgcYbcVrAhQ+s1s
eAOhlfrKMzVgRQ0KsJkn60SoSbVP6RyRfu+QQu24GfNtD8SzN8y0adB1PYXGVWmr
WW8+MqfZ1WIkn+NWW5bn3AEz8AYjQC66EvcWhlAWmyyBuUjIoNhpIgPHp6Vm7s+a
oPvw/VXwDX8NzpN0XYI+eVpsgClWtJ+HUcCSeuExTxrWu7Bewp6MMLeCjvi/lPpe
zKRDgnw=
=hx4k
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSHIsUACgkQJNaLcl1U
h9AbDQf+OnspdI5uW+X7ObBdB7KvPAXzDd7rMsXOTdp13bciSmaOzl74f0jPNWYU
GVo3a84eIU0YsdBP7M9+42vyUDQctgoBa7yyxZ+hW8gZQbXwgOZGmvWMncankm9n
hTlUbuLiowPzzjLERMDS0T2iJF0aFG7eB8Xghk/Su38HOCJI6fBx7sQlvt+aFK6J
/WzUuAqHng+6T7FHqxerGz/XIfvnRdS8qC9FZ7ySurmopn2AGY4YlifSGmSlPuFt
MM+nGNTOYn8scBAPRQlVCOwv7XOg6XqEvP5UNe8KpKN1rHfgP/B0X3ZbyE58bpPI
lqZzTXmY/dWD27FUc+3779EGLZ+L8w==
=PyzM
-----END PGP SIGNATURE-----
regmap: Merge up v6.4-rc6
The fix for maple tree RCU locking on sync is a dependency for the
block sync code for the maple tree.
Since the legacy exporting is gone with 2f804aca48 ("gpiolib:
Kill unused GPIOF_EXPORT and Co") there is no need to unexport
GPIO on freeing. Remove that call.
Note, the other users of this functionality do that explicitly,
except one SH and one OMAP boardfile which don't free GPIO anyways,
so it is safe to drop the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When the PMC device is disabled, probing of the Tegra186 GPIO driver
fails because the IRQ domain that is registered by the PMC driver is
not found. The PMC IRQ domain is only used for wake-up and does not
impact GPIO functionality in general. Therefore, if the PMC device is
disabled, skip looking up the PMC IRQ domain to allow the GPIO driver
to be probed.
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230607113104.11761-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The user-space policy of the gpio-sim is that configuration for lines
with offsets outside the bounds of the corresponding bank is ignored,
but gpio-sim is still using that configuration when constructing the
sim. In the case of named lines this results in temporarily allocating
space for names that are not used, and for hogs results in errors being
logged when the gpio-sim attempts to register the out of range hog with
gpiolib:
gpiochip_machine_hog: unable to get GPIO desc: -22
Add checks to filter out any line configuration outside the bounds
of the bank when constructing the sim.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Drivers should be silent when they work correctly. There's no reason to
emit info messages when GPIO lines are hogged. Demote the message to
debug.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When constructing the sim, gpio-sim constructs an array of named lines,
sized based on the largest offset of any named line, and then initializes
that array with the names of all lines, including unnamed hogs with higher
offsets. In doing so it writes NULLs beyond the extent of the array.
Add a check that only named lines are used to initialize the array.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Kent Gibson<warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver implements a GPIO enable/disable delay. It supports a list
of GPIO outputs, which ramp-up/ramp-down delay can be specified at
consumer location.
The main purpose is to address external, passive delays upon line
voltage changes.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that the of_gpiochip_add() doesn't use valid mask, we may
unify GPIO valid mask allocation and initialization. With this
it makes a symmetry to the similar which we done for IRQ chip.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is a common API to allocate a mask, but more than one duplicative
counterparts. Consolidate the latter into a single common API beneath.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no use of the GPIOF_OPEN_* in the kernel. Kill it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no use of the GPIOF_EXPORT in the kernel. Kill it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
arch/arm/mach-omap[12].
The patches have been reviewed and tested by everyone
who showed interest which was one person that tested
on OSK1 and Nokia 770, and we smoked out the bugs and
also addressed all review comments.
Any remaining problems can certainly be fixed in-tree.
-----BEGIN PGP SIGNATURE-----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=fMmV
-----END PGP SIGNATURE-----
Merge tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into gpio/for-next
This removes all usage of global GPIO numbers from
arch/arm/mach-omap[12].
The patches have been reviewed and tested by everyone
who showed interest which was one person that tested
on OSK1 and Nokia 770, and we smoked out the bugs and
also addressed all review comments.
Any remaining problems can certainly be fixed in-tree.
This change checks if we have the necessary permission to
access the GPIO. For devices that have support for virtualisation
we need to check both the TEGRA186_GPIO_VM_REG and the
TEGRA186_GPIO_SCR_REG registers. For device that do not have
virtualisation support for GPIOs we only need to check the
TEGRA186_GPIO_SCR_REG register.
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The TWL4030 GPIO driver has a custom platform data .set_up()
callback to call back into the platform and do misc stuff such
as hog and export a GPIO for WLAN PWR on a specific OMAP3 board.
Avoid all the kludgery in the platform data and the boardfile
and just put the quirks right into the driver. Make it
conditional on OMAP3.
I think the exported GPIO is used by some kind of userspace
so ordinary DTS hogs will probably not work.
Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In fact the device with chip id 0xD283 is called NCT6126D, and that is
the chip id the Nuvoton code was written for. Correct that name to avoid
confusion, because a NCT6116D in fact exists as well but has another
chip id, and is currently not supported.
The look at the spec also revealed that GPIO group7 in fact has 8 pins,
so correct the pin count in that group as well.
Fixes: d0918a84af ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116")
Reported-by: Xing Tong Wu <xingtong.wu@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Utilize a temporary variable to calculate number of ctx from ngpio
inside ->probe() implementation.
While at it, include math.h for using DIV_ROUND_UP().
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
sa1100_init_gpio() is declared in a machine specific header so it
can be called from platform code, but the definition is in the device
driver, which causes a warning:
drivers/gpio/gpio-sa1100.c:310:13: error: no previous prototype for 'sa1100_init_gpio' [-Werror=missing-prototypes]
It's already possible to include mach/generic.h from drivers, so add
this one here as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm version of gpiochip_add() function to handle removal for us.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If static allocation and dynamic allocation GPIOs are present,
dynamic allocation pollutes the numberspace for static allocation,
causing static allocation to fail.
Enforce dynamic allocation above GPIO_DYNAMIC_BASE.
Seen on a GTA04 when omap-gpio (static) and twl-gpio (dynamic)
raced:
[some successful registrations of omap_gpio instances]
[ 2.553833] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178
[ 2.561401] gpiochip_find_base: found new base at 160
[ 2.564392] gpio gpiochip5: (twl4030): added GPIO chardev (254:5)
[ 2.564544] gpio gpiochip5: registered GPIOs 160 to 177 on twl4030
[...]
[ 2.692169] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 2.697357] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[ 2.703643] gpiochip_find_base: found new base at 178
[ 2.704376] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
[ 2.704589] gpio gpiochip6: registered GPIOs 178 to 181 on omap-gpmc
[...]
[ 2.840393] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.849365] gpio gpiochip7: (gpio-160-191): GPIO integer space overlap, cannot add chip
[ 2.857513] gpiochip_add_data_with_key: GPIOs 160..191 (gpio-160-191) failed to register, -16
[ 2.866149] omap_gpio 48310000.gpio: error -EBUSY: Could not register gpio chip
On that device it is fixed invasively by
commit 92bf78b33b ("gpio: omap: use dynamic allocation of base")
but let's also fix that for devices where there is still
a mixture of static and dynamic allocation.
Fixes: 7b61212f2a ("gpiolib: Get rid of ARCH_NR_GPIOS")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm version of gpiochip add function to handle removal for us.
While here update copyright and module author.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm version of gpiochip add function to handle removal for us.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm version of gpiochip add function to handle removal for us.
While here update copyright and module author.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver's debugfs files have had a read operation since commit
2a9e27408e ("gpio: mockup: rework debugfs interface"), but were
still being created with write-only mode bits. Update them to
indicate that the files can also be read.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 2a9e27408e ("gpio: mockup: rework debugfs interface")
Cc: stable@kernel.org # v5.1+
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
