Add synthetic event node support to boot time tracing.
The synthetic event is a kind of event node, but the group
name is "synthetic".
- ftrace.event.synthetic.EVENT.fields = FIELD[, FIELD2...]
Defines new synthetic event with FIELDs. Each field should be
"type varname".
The synthetic node requires "fields" string arraies, which defines
the fields as same as tracing/synth_events interface.
Link: http://lkml.kernel.org/r/157867241236.17873.12411615143321557709.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add kprobe event support on event node to boot-time tracing.
If the group name of event is "kprobes", the boot-time tracing
defines new probe event according to "probes" values.
- ftrace.event.kprobes.EVENT.probes = PROBE[, PROBE2...]
Defines new kprobe event based on PROBEs. It is able to define
multiple probes on one event, but those must have same type of
arguments.
For example,
ftrace.events.kprobes.myevent {
probes = "vfs_read $arg1 $arg2";
enable;
}
This will add kprobes:myevent on vfs_read with the 1st and the 2nd
arguments.
Link: http://lkml.kernel.org/r/157867240104.17873.9712052065426433111.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add per-event settings for boottime tracing. User can set filter,
actions and enable on each event on boot. The event entries are
under ftrace.event.GROUP.EVENT node (note that the option key
includes event's group name and event name.) This supports below
configs.
- ftrace.event.GROUP.EVENT.enable
Enables GROUP:EVENT tracing.
- ftrace.event.GROUP.EVENT.filter = FILTER
Set FILTER rule to the GROUP:EVENT.
- ftrace.event.GROUP.EVENT.actions = ACTION[, ACTION2...]
Set ACTIONs to the GROUP:EVENT.
For example,
ftrace.event.sched.sched_process_exec {
filter = "pid < 128"
enable
}
this will enable tracing "sched:sched_process_exec" event
with "pid < 128" filter.
Link: http://lkml.kernel.org/r/157867238942.17873.11177628789184546198.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Setup tracing options via extra boot config in addition to kernel
command line.
This adds following commands support. These are applied to
the global trace instance.
- ftrace.options = OPT1[,OPT2...]
Enable given ftrace options.
- ftrace.trace_clock = CLOCK
Set given CLOCK to ftrace's trace_clock.
- ftrace.buffer_size = SIZE
Configure ftrace buffer size to SIZE. You can use "KB" or "MB"
for that SIZE.
- ftrace.events = EVENT[, EVENT2...]
Enable given events on boot. You can use a wild card in EVENT.
- ftrace.tracer = TRACER
Set TRACER to current tracer on boot. (e.g. function)
Note that this is NOT replacing the kernel parameters, because
this boot config based setting is later than that. If you want to
trace earlier boot events, you still need kernel parameters.
Link: http://lkml.kernel.org/r/157867237723.17873.17494943526320587488.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Make the synthetic event accepts a different type field to record.
However, the size and signed flag must be same.
Link: http://lkml.kernel.org/r/157867235358.17873.61732996461602171.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Register kprobe event to dynevent in subsys_initcall level.
This will allow kernel to register new kprobe events in
fs_initcall level via trace_run_command.
Link: http://lkml.kernel.org/r/157867234213.17873.18039000024374948737.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since kprobe-events use event_trigger_unlock_commit_regs() directly,
that events doesn't show up in printk buffer if "tp_printk" is set.
Use trace_event_buffer_commit() in kprobe events so that it can
invoke output_printk() as same as other trace events.
Link: http://lkml.kernel.org/r/157867233085.17873.5210928676787339604.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Adjusted data var declaration placement in __kretprobe_trace_func() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Apply soft-disabled and the filter rule of the trace events to
the printk output of tracepoints (a.k.a. tp_printk kernel parameter)
as same as trace buffer output.
Link: http://lkml.kernel.org/r/157867231876.17873.15825819592284704068.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
eBPF requires needing to know the size of the perf ring buffer structure.
But it unfortunately has the same name as the generic ring buffer used by
tracing and oprofile. To make it less ambiguous, rename the perf ring buffer
structure to "perf_buffer".
As other parts of the ring buffer code has "perf_" as the prefix, it only
makes sense to give the ring buffer the "perf_" prefix as well.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Acked-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXhhtDQAKCRCRxhvAZXjc
orQ3AQD7H2ovZbPIpWbwOnRIExBF4O8gPDfFc/J/RweZx40v/AD/QwfFnq0TpmUc
UfS4zzLxJ4K+L4RYWId5v8MFHGIu8QQ=
=LmmJ
-----END PGP SIGNATURE-----
Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"This contains a series of patches to fix CLONE_SETTLS when used with
clone3().
The clone3() syscall passes the tls argument through struct clone_args
instead of a register. This means, all architectures that do not
implement copy_thread_tls() but still support CLONE_SETTLS via
copy_thread() expecting the tls to be located in a register argument
based on clone() are currently unfortunately broken. Their tls value
will be garbage.
The patch series fixes this on all architectures that currently define
__ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
that any architecture that enables clone3() in the future is forced to
also implement copy_thread_tls().
My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
split and just have copy_thread_tls() at some point in the not too
distant future (Maybe even renaming copy_thread_tls() back to simply
copy_thread() once the old function is ripped from all arches). This
is dependent now on all arches supporting clone3().
While all relevant arches do that now there are still four missing:
ia64, m68k, sh and sparc. They have the system call reserved, but not
implemented. Once they all implement clone3() we can get rid of
ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.
This series also includes a minor fix for the arm64 uapi headers which
caused __NR_clone3 to be missing from the exported user headers.
Unfortunately the series came in a little late especially given that
it touches a range of architectures. Due to the holidays not all arch
maintainers responded in time probably due to their backlog. Will and
Arnd have thankfully acked the arm specific changes.
Given that the changes are straightforward and rather minimal combined
with the fact the that clone3() with CLONE_SETTLS is broken I decided
to send them post rc3 nonetheless"
* tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
um: Implement copy_thread_tls
clone3: ensure copy_thread_tls is implemented
xtensa: Implement copy_thread_tls
riscv: Implement copy_thread_tls
parisc: Implement copy_thread_tls
arm: Implement copy_thread_tls
arm64: Implement copy_thread_tls
arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
copy_thread implementations handle CLONE_SETTLS by reading the TLS
value from the registers containing the syscall arguments for
clone. This doesn't work with clone3 since the TLS value is passed
in clone_args instead.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Cc: <stable@vger.kernel.org> # 5.3.x
Link: https://lore.kernel.org/r/20200102172413.654385-8-amanieu@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
- kbuild found missing define of MCOUNT_INSN_SIZE for various build configs
- Initialize variable to zero as gcc thinks it is used undefined
(it really isn't but the code is subtle enough that this doesn't hurt)
- Convert from do_div() to div64_ull() to prevent potential divide by zero
- Unregister a trace point on error path in sched_wakeup tracer
- Use signed offset for archs that can have stext not be first
- A simple indentation fix (whitespace error)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXhOj6xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qukzAQCMNfkAbMFA+C1uORMhr/jWhi4eshWN
4jZ2u5X8zGuuXQD+PaQU4n8d0K4uCPF+lFD16DfFxXvCOXHfN3/zXmxGvw8=
=djaW
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- kbuild found missing define of MCOUNT_INSN_SIZE for various build
configs
- Initialize variable to zero as gcc thinks it is used undefined (it
really isn't but the code is subtle enough that this doesn't hurt)
- Convert from do_div() to div64_ull() to prevent potential divide by
zero
- Unregister a trace point on error path in sched_wakeup tracer
- Use signed offset for archs that can have stext not be first
- A simple indentation fix (whitespace error)"
* tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix indentation issue
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
tracing: Change offset type to s32 in preempt/irq tracepoints
ftrace: Avoid potential division by zero in function profiler
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls
tracing: Initialize val to zero in parse_entry of inject code
Before commit 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
cgroup bpf structures were released with
corresponding cgroup structures. It guaranteed the hierarchical order
of destruction: children were always first. It preserved attached
programs from being released before their propagated copies.
But with cgroup auto-detachment there are no such guarantees anymore:
cgroup bpf is released as soon as the cgroup is offline and there are
no live associated sockets. It means that an attached program can be
detached and released, while its propagated copy is still living
in the cgroup subtree. This will obviously lead to an use-after-free
bug.
To reproduce the issue the following script can be used:
#!/bin/bash
CGROOT=/sys/fs/cgroup
mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C
sleep 1
./test_cgrp2_attach ${CGROOT}/A egress &
A_PID=$!
./test_cgrp2_attach ${CGROOT}/B egress &
B_PID=$!
echo $$ > ${CGROOT}/A/C/cgroup.procs
iperf -s &
S_PID=$!
iperf -c localhost -t 100 &
C_PID=$!
sleep 1
echo $$ > ${CGROOT}/B/cgroup.procs
echo ${S_PID} > ${CGROOT}/B/cgroup.procs
echo ${C_PID} > ${CGROOT}/B/cgroup.procs
sleep 1
rmdir ${CGROOT}/A/C
rmdir ${CGROOT}/A
sleep 1
kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID}
On the unpatched kernel the following stacktrace can be obtained:
[ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002
[ 33.620677] #PF: supervisor read access in kernel mode
[ 33.621293] #PF: error_code(0x0000) - not-present page
[ 33.622754] Oops: 0000 [#1] SMP NOPTI
[ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23
[ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0
[ 33.635809] Call Trace:
[ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0
[ 33.636728] ? __switch_to_asm+0x40/0x70
[ 33.637196] ip_finish_output+0x68/0xa0
[ 33.637654] ip_output+0x76/0xf0
[ 33.638046] ? __ip_finish_output+0x1c0/0x1c0
[ 33.638576] __ip_queue_xmit+0x157/0x410
[ 33.639049] __tcp_transmit_skb+0x535/0xaf0
[ 33.639557] tcp_write_xmit+0x378/0x1190
[ 33.640049] ? _copy_from_iter_full+0x8d/0x260
[ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0
[ 33.641098] ? sock_has_perm+0x10/0xa0
[ 33.641574] tcp_sendmsg+0x28/0x40
[ 33.641985] sock_sendmsg+0x57/0x60
[ 33.642411] sock_write_iter+0x97/0x100
[ 33.642876] new_sync_write+0x1b6/0x1d0
[ 33.643339] vfs_write+0xb6/0x1a0
[ 33.643752] ksys_write+0xa7/0xe0
[ 33.644156] do_syscall_64+0x5b/0x1b0
[ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by grabbing a reference to the bpf structure of each ancestor
on the initialization of the cgroup bpf structure, and dropping the
reference at the end of releasing the cgroup bpf structure.
This will restore the hierarchical order of cgroup bpf releasing,
without adding any operations on hot paths.
Thanks to Josef Bacik for the debugging and the initial analysis of
the problem.
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not. Account cred->security to kmemcg.
Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes. Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period. This
overhead can adversely impact the isolation on the system.
One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.
Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXg9C5wAKCRCRxhvAZXjc
oiZXAPsGFXyDCWlKnShBpKufdFh6XugADlyZK0Si2ISWQoJJsgD/Ri1g3zg6V7YC
HBG0sz8+vSk/Ys55yDQz+K1d1MTkdQ4=
=8uQe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here are two fixes:
- Panic earlier when global init exits to generate useable coredumps.
Currently, when global init and all threads in its thread-group
have exited we panic via:
do_exit()
-> exit_notify()
-> forget_original_parent()
-> find_child_reaper()
This makes it hard to extract a useable coredump for global init
from a kernel crashdump because by the time we panic exit_mm() will
have already released global init's mm. We now panic slightly
earlier. This has been a problem in certain environments such as
Android.
- Fix a race in assigning and reading taskstats for thread-groups
with more than one thread.
This patch has been waiting for quite a while since people
disagreed on what the correct fix was at first"
* tag 'for-linus-2020-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: panic before exit_mm() on global init exit
taskstats: fix data-race
In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.
Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com
Cc: stable@vger.kernel.org
Fixes: 478142c39c ("tracing: do not grab lock in wakeup latency function tracing")
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.
Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: e330b3bcd8 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc5 ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Cc: stable@vger.kernel.org
Fixes: 4df297129f ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to handle direct calls along side of function graph tracer, a check
is made to see if the address being traced by the function graph tracer is a
direct call or not. To get the address used by direct callers, the return
address is subtracted by MCOUNT_INSN_SIZE.
For some archs with certain configurations, MCOUNT_INSN_SIZE is undefined
here. But these should not be using direct calls anyway. Just define
MCOUNT_INSN_SIZE to zero in this case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: ff205766db ("ftrace: Fix function_graph tracer interaction with BPF trampoline")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Fix samples and selftests to zero passed-in buffer (Sargun Dhillon)
- Enforce zeroed buffer checking (Sargun Dhillon)
- Verify buffer sanity check in selftest (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=WgBI
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon.
The bulk of this is fixing the surrounding samples and selftests so
that seccomp can correctly validate the seccomp_notify_ioctl buffer as
being initially zeroed.
Summary:
- Fix samples and selftests to zero passed-in buffer
- Enforce zeroed buffer checking
- Verify buffer sanity check in selftest"
* tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
seccomp: Check that seccomp_notif is zeroed out by the user
selftests/seccomp: Zero out seccomp_notif
samples/seccomp: Zero out members based on seccomp_notif_sizes
gcc produces a variable may be uninitialized warning for "val" in
parse_entry(). This is really a false positive, but the code is subtle
enough to just initialize val to zero and it's not a fast path to worry
about it.
Marked for stable to remove the warning in the stable trees as well.
Cc: stable@vger.kernel.org
Fixes: 6c3edaf9fd ("tracing: Introduce trace event injection")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch is a small change in enforcement of the uapi for
SECCOMP_IOCTL_NOTIF_RECV ioctl. Specifically, the datastructure which
is passed (seccomp_notif) must be zeroed out. Previously any of its
members could be set to nonsense values, and we would ignore it.
This ensures all fields are set to their zero value.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191229062451.9467-2-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:
ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!
This happens in:
static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here
Namely:
__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!
Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.
Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.
This approach was adopted from the commit 72139dfa24 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7f ("chardev: add
helper function to register char devs with a struct device").
Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u
Analyzed-by: Stephen Johnston <sjohnsto@redhat.com>
Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anatoly has been fuzzing with kBdysch harness and reported a hang in one
of the outcomes. Upon closer analysis, it turns out that precise scalar
value tracking is missing a few precision markings for unknown scalars:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 0
1: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (35) if r0 >= 0xf72e goto pc+0
--> only follow fallthrough
2: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
2: (35) if r0 >= 0x80fe0000 goto pc+0
--> only follow fallthrough
3: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
3: (14) w0 -= -536870912
4: R0_w=invP536870912 R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (0f) r1 += r0
5: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0
5: (55) if r1 != 0x104c1500 goto pc+0
--> push other branch for later analysis
R0_w=invP536870912 R1_w=inv273421568 R10=fp0
6: R0_w=invP536870912 R1_w=inv273421568 R10=fp0
6: (b7) r0 = 0
7: R0=invP0 R1=inv273421568 R10=fp0
7: (76) if w1 s>= 0xffffff00 goto pc+3
--> only follow goto
11: R0=invP0 R1=inv273421568 R10=fp0
11: (95) exit
6: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0
6: (b7) r0 = 0
propagating r0
7: safe
processed 11 insns [...]
In the analysis of the second path coming after the successful exit above,
the path is being pruned at line 7. Pruning analysis found that both r0 are
precise P0 and both R1 are non-precise scalars and given prior path with
R1 as non-precise scalar succeeded, this one is therefore safe as well.
However, problem is that given condition at insn 7 in the first run, we only
followed goto and didn't push the other branch for later analysis, we've
never walked the few insns in there and therefore dead-code sanitation
rewrites it as goto pc-1, causing the hang depending on the skb address
hitting these conditions. The issue is that R1 should have been marked as
precise as well such that pruning enforces range check and conluded that new
R1 is not in range of old R1. In insn 4, we mark R1 (skb) as unknown scalar
via __mark_reg_unbounded() but not mark_reg_unbounded() and therefore
regs->precise remains as false.
Back in b5dc0163d8 ("bpf: precise scalar_value tracking"), this was not
the case since marking out of __mark_reg_unbounded() had this covered as well.
Once in both are set as precise in 4 as they should have been, we conclude
that given R1 was in prior fall-through path 0x104c1500 and now is completely
unknown, the check at insn 7 concludes that we need to continue walking.
Analysis after the fix:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 0
1: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (35) if r0 >= 0xf72e goto pc+0
2: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
2: (35) if r0 >= 0x80fe0000 goto pc+0
3: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
3: (14) w0 -= -536870912
4: R0_w=invP536870912 R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (0f) r1 += r0
5: R0_w=invP536870912 R1_w=invP(id=0) R10=fp0
5: (55) if r1 != 0x104c1500 goto pc+0
R0_w=invP536870912 R1_w=invP273421568 R10=fp0
6: R0_w=invP536870912 R1_w=invP273421568 R10=fp0
6: (b7) r0 = 0
7: R0=invP0 R1=invP273421568 R10=fp0
7: (76) if w1 s>= 0xffffff00 goto pc+3
11: R0=invP0 R1=invP273421568 R10=fp0
11: (95) exit
6: R0_w=invP536870912 R1_w=invP(id=0) R10=fp0
6: (b7) r0 = 0
7: R0_w=invP0 R1_w=invP(id=0) R10=fp0
7: (76) if w1 s>= 0xffffff00 goto pc+3
R0_w=invP0 R1_w=invP(id=0) R10=fp0
8: R0_w=invP0 R1_w=invP(id=0) R10=fp0
8: (a5) if r0 < 0x2007002a goto pc+0
9: R0_w=invP0 R1_w=invP(id=0) R10=fp0
9: (57) r0 &= -16316416
10: R0_w=invP0 R1_w=invP(id=0) R10=fp0
10: (a6) if w0 < 0x1201 goto pc+0
11: R0_w=invP0 R1_w=invP(id=0) R10=fp0
11: (95) exit
11: R0=invP0 R1=invP(id=0) R10=fp0
11: (95) exit
processed 16 insns [...]
Fixes: 6754172c20 ("bpf: fix precision tracking in presence of bpf2bpf calls")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191222223740.25297-1-daniel@iogearbox.net
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
- Fix memory leak on error path of process_system_preds()
- Lock inversion fix with updating tgid recording option
- Fix histogram compare function on big endian machines
- Fix histogram trigger function on big endian machines
- Make trace_printk() irq sync on init for kprobe selftest correctness
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXf6MRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlw6AQCny2YeASymmOjDqh9/G53UdhO539Y2
oL/2nQ8B9T9KWgD6AmmohhbX+TS9l5Nwy2/bKmRgADZ7u+2XLM2f2mYR2Ag=
=D7hI
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix memory leak on error path of process_system_preds()
- Lock inversion fix with updating tgid recording option
- Fix histogram compare function on big endian machines
- Fix histogram trigger function on big endian machines
- Make trace_printk() irq sync on init for kprobe selftest correctness
* tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix endianness bug in histogram trigger
samples/trace_printk: Wait for IRQ work to finish
tracing: Fix lock inversion in trace_event_enable_tgid_record()
tracing: Have the histogram compare functions convert to u64 first
tracing: Avoid memory leak in process_system_preds()
At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.
Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: 4b147936fa ("tracing: Add support for 'synthetic' events")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Task T2 Task T3
trace_options_core_write() subsystem_open()
mutex_lock(trace_types_lock) mutex_lock(event_mutex)
set_tracer_flag()
trace_event_enable_tgid_record() mutex_lock(trace_types_lock)
mutex_lock(event_mutex)
This gives a circular dependency deadlock between trace_types_lock and
event_mutex. To fix this invert the usage of trace_types_lock and
event_mutex in trace_options_core_write(). This keeps the sequence of
lock usage consistent.
Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com
Cc: stable@vger.kernel.org
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a (rare) PSI crash fix, a CPU affinity related balancing
fix, and a toning down of active migration attempts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: fix spurious active migration
sched/fair: Fix find_idlest_group() to handle CPU affinity
psi: Fix a division error in psi poll()
sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime
Pull perf fixes from Ingo Molnar:
"Misc fixes: a BTS fix, a PT NMI handling fix, a PMU sysfs fix and an
SRCU annotation"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Add SRCU annotation for pmus list walk
perf/x86/intel: Fix PT PMI handling
perf/x86/intel/bts: Fix the use of page_private()
perf/x86: Fix potential out-of-bounds access
Currently, when global init and all threads in its thread-group have exited
we panic via:
do_exit()
-> exit_notify()
-> forget_original_parent()
-> find_child_reaper()
This makes it hard to extract a useable coredump for global init from a
kernel crashdump because by the time we panic exit_mm() will have already
released global init's mm.
This patch moves the panic futher up before exit_mm() is called. As was the
case previously, we only panic when global init and all its threads in the
thread-group have exited.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
[christian.brauner@ubuntu.com: fix typo, rewrite commit message]
Link: https://lore.kernel.org/r/1576736993-10121-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.
To fix this, first derference the value as a u64 then convert it to the type
being compared.
Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa0 ("tracing: Add lock-free tracing_map")
Acked-by: Tom Zanussi <zanussi@kernel.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
While testing Cilium with /unreleased/ Linus' tree under BPF-based NodePort
implementation, I noticed a strange BPF SNAT engine behavior from time to
time. In some cases it would do the correct SNAT/DNAT service translation,
but at a random point in time it would just stop and perform an unexpected
translation after SYN, SYN/ACK and stack would send a RST back. While initially
assuming that there is some sort of a race condition in BPF code, adding
trace_printk()s for debugging purposes at some point seemed to have resolved
the issue auto-magically.
Digging deeper on this Heisenbug and reducing the trace_printk() calls to
an absolute minimum, it turns out that a single call would suffice to
trigger / not trigger the seen RST issue, even though the logic of the
program itself remains unchanged. Turns out the single call changed verifier
pruning behavior to get everything to work. Reconstructing a minimal test
case, the incorrect JIT dump looked as follows:
# bpftool p d j i 11346
0xffffffffc0cba96c:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff89cc74e85800,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff89cc74e85800,%rsi
49: mov -0x224(%rbp),%eax
4f: cmp $0x20,%eax
52: ja 0x0000000000000062
54: add $0x1,%eax
57: mov %eax,-0x224(%rbp)
5d: jmpq 0xffffffffffff6911
62: mov $0x1,%eax
[...]
Hence, unexpectedly, JIT emitted a direct jump even though retpoline based
one would have been needed since in line 2c and 3a we have different slot
keys in BPF reg r3. Verifier log of the test case reveals what happened:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0xffff89cc74d54a00
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=inv13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0xffff89cc74d54a00
11: safe
processed 13 insns (limit 1000000) [...]
Second branch is pruned by verifier since considered safe, but issue is that
record_func_key() couldn't have seen the index in line 3a and therefore
decided that emitting a direct jump at this location was okay.
Fix this by reusing our backtracking logic for precise scalar verification
in order to prevent pruning on the slot key. This means verifier will track
content of r3 all the way backwards and only prune if both scalars were
unknown in state equivalence check and therefore poisoned in the first place
in record_func_key(). The range is [x,x] in record_func_key() case since
the slot always would have to be constant immediate. Correct verification
after fix:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=invP(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0x0
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=invP13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0x0
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
processed 15 insns (limit 1000000) [...]
And correct corresponding JIT dump:
# bpftool p d j i 11
0xffffffffc0dc34c4:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff9928b4c02200,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff9928b4c02200,%rsi
49: cmp $0x4,%rdx
4d: jae 0x0000000000000093
4f: and $0x3,%edx
52: mov %edx,%edx
54: cmp %edx,0x24(%rsi)
57: jbe 0x0000000000000093
59: mov -0x224(%rbp),%eax
5f: cmp $0x20,%eax
62: ja 0x0000000000000093
64: add $0x1,%eax
67: mov %eax,-0x224(%rbp)
6d: mov 0x110(%rsi,%rdx,8),%rax
75: test %rax,%rax
78: je 0x0000000000000093
7a: mov 0x30(%rax),%rax
7e: add $0x19,%rax
82: callq 0x000000000000008e
87: pause
89: lfence
8c: jmp 0x0000000000000087
8e: mov %rax,(%rsp)
92: retq
93: mov $0x1,%eax
[...]
Also explicitly adding explicit env->allow_ptr_leaks to fixup_bpf_calls() since
backtracking is enabled under former (direct jumps as well, but use different
test). In case of only tracking different map pointers as in c93552c443 ("bpf:
properly enforce index mask to prevent out-of-bounds speculation"), pruning
cannot make such short-cuts, neither if there are paths with scalar and non-scalar
types as r3. mark_chain_precision() is only needed after we know that
register_is_const(). If it was not the case, we already poison the key on first
path and non-const key in later paths are not matching the scalar range in regsafe()
either. Cilium NodePort testing passes fine as well now. Note, released kernels
not affected.
Fixes: d2e4c1e6c2 ("bpf: Constant map key tracking for prog array pokes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/ac43ffdeb7386c5bd688761ed266f3722bb39823.1576789878.git.daniel@iogearbox.net
Fix a problem related to CPU offline/online and cpufreq governors
that in some system configurations may lead to a system-wide
deadlock during CPU online.
-----BEGIN PGP SIGNATURE-----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=+MQE
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a problem related to CPU offline/online and cpufreq governors that
in some system configurations may lead to a system-wide deadlock
during CPU online"
* tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid leaving stale IRQ work items during CPU offline
Pull locking fixes from Ingo Molnar:
"Tone down mutex debugging complaints, and annotate/fix spinlock
debugging data accesses for KCSAN"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts"
locking/spinlock/debug: Fix various data races
Recently noticed that we're tracking programs related to local storage maps
through their prog pointer. This is a wrong assumption since the prog pointer
can still change throughout the verification process, for example, whenever
bpf_patch_insn_single() is called.
Therefore, the prog pointer that was assigned via bpf_cgroup_storage_assign()
is not guaranteed to be the same as we pass in bpf_cgroup_storage_release()
and the map would therefore remain in busy state forever. Fix this by using
the prog's aux pointer which is stable throughout verification and beyond.
Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1471c69eca3022218666f909bc927a92388fd09e.1576580332.git.daniel@iogearbox.net
The load balance can fail to find a suitable task during the periodic check
because the imbalance is smaller than half of the load of the waiting
tasks. This results in the increase of the number of failed load balance,
which can end up to start an active migration. This active migration is
useless because the current running task is not a better choice than the
waiting ones. In fact, the current task was probably not running but
waiting for the CPU during one of the previous attempts and it had already
not been selected.
When load balance fails too many times to migrate a task, we should relax
the contraint on the maximum load of the tasks that can be migrated
similarly to what is done with cache hotness.
Before the rework, load balance used to set the imbalance to the average
load_per_task in order to mitigate such situation. This increased the
likelihood of migrating a task but also of selecting a larger task than
needed while more appropriate ones were in the list.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1575036287-6052-1-git-send-email-vincent.guittot@linaro.org
Because of CPU affinity, the local group can be skipped which breaks the
assumption that statistics are always collected for local group. With
uninitialized local_sgs, the comparison is meaningless and the behavior
unpredictable. This can even end up to use local pointer which is to
NULL in this case.
If the local group has been skipped because of CPU affinity, we return
the idlest group.
Fixes: 57abff067a ("sched/fair: Rework find_idlest_group()")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: mingo@redhat.com
Cc: mgorman@suse.de
Cc: juri.lelli@redhat.com
Cc: dietmar.eggemann@arm.com
Cc: bsegall@google.com
Cc: qais.yousef@arm.com
Link: https://lkml.kernel.org/r/1575483700-22153-1-git-send-email-vincent.guittot@linaro.org
The psi window size is a u64 an can be up to 10 seconds right now,
which exceeds the lower 32 bits of the variable. We currently use
div_u64 for it, which is meant only for 32-bit divisors. The result is
garbage pressure sampling values and even potential div0 crashes.
Use div64_u64.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-3-hannes@cmpxchg.org
Jingfeng reports rare div0 crashes in psi on systems with some uptime:
[58914.066423] divide error: 0000 [#1] SMP
[58914.070416] Modules linked in: ipmi_poweroff ipmi_watchdog toa overlay fuse tcp_diag inet_diag binfmt_misc aisqos(O) aisqos_hotfixes(O)
[58914.083158] CPU: 94 PID: 140364 Comm: kworker/94:2 Tainted: G W OE K 4.9.151-015.ali3000.alios7.x86_64 #1
[58914.093722] Hardware name: Alibaba Alibaba Cloud ECS/Alibaba Cloud ECS, BIOS 3.23.34 02/14/2019
[58914.102728] Workqueue: events psi_update_work
[58914.107258] task: ffff8879da83c280 task.stack: ffffc90059dcc000
[58914.113336] RIP: 0010:[] [] psi_update_stats+0x1c1/0x330
[58914.122183] RSP: 0018:ffffc90059dcfd60 EFLAGS: 00010246
[58914.127650] RAX: 0000000000000000 RBX: ffff8858fe98be50 RCX: 000000007744d640
[58914.134947] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00003594f700648e
[58914.142243] RBP: ffffc90059dcfdf8 R08: 0000359500000000 R09: 0000000000000000
[58914.149538] R10: 0000000000000000 R11: 0000000000000000 R12: 0000359500000000
[58914.156837] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8858fe98bd78
[58914.164136] FS: 0000000000000000(0000) GS:ffff887f7f380000(0000) knlGS:0000000000000000
[58914.172529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[58914.178467] CR2: 00007f2240452090 CR3: 0000005d5d258000 CR4: 00000000007606f0
[58914.185765] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[58914.193061] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[58914.200360] PKRU: 55555554
[58914.203221] Stack:
[58914.205383] ffff8858fe98bd48 00000000000002f0 0000002e81036d09 ffffc90059dcfde8
[58914.213168] ffff8858fe98bec8 0000000000000000 0000000000000000 0000000000000000
[58914.220951] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[58914.228734] Call Trace:
[58914.231337] [] psi_update_work+0x22/0x60
[58914.237067] [] process_one_work+0x189/0x420
[58914.243063] [] worker_thread+0x4e/0x4b0
[58914.248701] [] ? process_one_work+0x420/0x420
[58914.254869] [] kthread+0xe6/0x100
[58914.259994] [] ? kthread_park+0x60/0x60
[58914.265640] [] ret_from_fork+0x39/0x50
[58914.271193] Code: 41 29 c3 4d 39 dc 4d 0f 42 dc <49> f7 f1 48 8b 13 48 89 c7 48 c1
[58914.279691] RIP [] psi_update_stats+0x1c1/0x330
The crashing instruction is trying to divide the observed stall time
by the sampling period. The period, stored in R8, is not 0, but we are
dividing by the lower 32 bits only, which are all 0 in this instance.
We could switch to a 64-bit division, but the period shouldn't be that
big in the first place. It's the time between the last update and the
next scheduled one, and so should always be around 2s and comfortably
fit into 32 bits.
The bug is in the initialization of new cgroups: we schedule the first
sampling event in a cgroup as an offset of sched_clock(), but fail to
initialize the last_update timestamp, and it defaults to 0. That
results in a bogusly large sampling period the first time we run the
sampling code, and consequently we underreport pressure for the first
2s of a cgroup's life. But worse, if sched_clock() is sufficiently
advanced on the system, and the user gets unlucky, the period's lower
32 bits can all be 0 and the sampling division will crash.
Fix this by initializing the last update timestamp to the creation
time of the cgroup, thus correctly marking the start of the first
pressure sampling period in a new cgroup.
Reported-by: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-2-hannes@cmpxchg.org
Since commit
28875945ba ("rcu: Add support for consolidated-RCU reader checking")
there is an additional check to ensure that a RCU related lock is held
while the RCU list is iterated.
This section holds the SRCU reader lock instead.
Add annotation to list_for_each_entry_rcu() that pmus_srcu must be
acquired during the list traversal.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lkml.kernel.org/r/20191119121429.zhcubzdhm672zasg@linutronix.de
Commit da765a2f59 ("bpf: Add poke dependency tracking for prog array
maps") wrongly assumed that in case of prog load errors, we're cleaning
up all program tracking via bpf_free_used_maps().
However, it can happen that we're still at the point where we didn't copy
map pointers into the prog's aux section such that env->prog->aux->used_maps
is still zero, running into a UAF. In such case, the verifier has similar
release_maps() helper that drops references to used maps from its env.
Consolidate the release code into __bpf_free_used_maps() and call it from
all sides to fix it.
Fixes: da765a2f59 ("bpf: Add poke dependency tracking for prog array maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1c2909484ca524ae9f55109b06f22b6213e76376.1576514756.git.daniel@iogearbox.net
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl3umDgWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlvsD/49R12HK7UzTxNTrcpvbadJ4t7j
j/qJvjMerW7iVNAPOoNAOePUa21+y3rI1AZPvoPyzIqp1Bf2eOICf5SdisG2cG+O
X0A8EKWvS0SSQWSKaT6udUKJ3nBJItwvOvQ5B58KQzcOj3S4X7B9iVBWgieMHrzz
urkZm7pqowrZB3wuF8keRtli5IZaoiCwzApy48Qrn70G3OeXymknFbpHTDwIAiGw
RiE5Xh0R4EzQdsYyCgjR8U56gBchadAmj8BUJU0ppMnOFMyIAG670hNLrs0L3roP
8TOIeyb993ZC5GZaMlnR8mz0jfibfkPa3Z85VAsVyQSPaOQldwc9j8TGBqD5Gfat
1PjOU5RVwma0pH5xTPOeevWPQpIK9KovQpQYqMMN9GMxOEx96IOUjwTrnNK2xWoN
UGyOVlESFGoniClhCiKYzPSrYOjlIBk5ovf15PdTe+bwyUDMfyfy5CZV88OS2DHz
ZBZvpLrH/EMW9zJ+FqMTp0C4s4wa2Ioid3bSh6XuNUTtltKSjp71eUja8ZEz+2sd
5AGstCC+hYqxaEk+6/851pfkQ9sbBjwuGtNrtX+pqreiLUvWLhQ0yUj6cLXlEQNH
aucjCukCjI+4lMzofeaQ2LbNhtff4YsfO4b1Ye8maoDdHjzUVL57n3bTOxKhdzbt
y6FM3lApOjk3OyaTJQ==
=YU4A
-----END PGP SIGNATURE-----
Merge tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FIELD_SIZEOF conversion from Kees Cook:
"A mostly mechanical treewide conversion from FIELD_SIZEOF() to
sizeof_field(). This avoids the redundancy of having 2 macros
(actually 3) doing the same thing, and consolidates on sizeof_field().
While "field" is not an accurate name, it is the common name used in
the kernel, and doesn't result in any unintended innuendo.
As there are still users of FIELD_SIZEOF() in -next, I will clean up
those during this coming development cycle and send the final old
macro removal patch at that time"
* tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use sizeof_field() macro
MIPS: OCTEON: Replace SIZEOF_FIELD() macro
