Commit Graph

68 Commits

Author SHA1 Message Date
Chad Dupuis
3f9de7f041 scsi: qedf: Check if link is already up when receiving a link up event from qed
[mkp: typo]

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
a8f192bce1 scsi: qedf: Return request as DID_NO_CONNECT if MSI-X is not enabled
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
adf4884252 scsi: qedf: Release RRQ reference correctly when RRQ command times out
When an RRQ request times out the reference is not getting decremented
correctly as there are still ELS commands leftover when we flush any
pending I/Os during offload:

[  281.788553] [0000:21:00.3]:[qedf_cmd_timeout:58]:4: ELS timeout, xid=0x96a.
...
[  281.788553] [0000:21:00.3]:[qedf_cmd_timeout:58]:4: ELS timeout, xid=0x96a.
[  281.788772] [0000:21:00.3]:[qedf_rrq_compl:182]:4: Entered.
[  281.788774] [0000:21:00.3]:[qedf_rrq_compl:200]:4: rrq_compl: orig io = ffffc90004c556f8, orig xid = 0x81b, rrq_xid = 0x96a, refcount=1
...
[  331.448032] [0000:21:00.3]:[qedf_flush_els_req:1512]:4: Flushing ELS request xid=0x96a refcount=2.

The fix is to call kref_put on the rrq_req in case of timeout as the
timeout handler will call rrq_compl directly vs. a normal completion
where it is call from els_compl.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
84b2ba6e42 scsi: qedf: Honor priority from DCBX FCoE App tag
We currently hard code the priority in the 8021q tag to 3 for FCoE
traffic.  The vast majority of the time this is fine but if the priority
is something else besides 3, any VLAN ID comparison either in the
non-offload path or offload path will fail and cause dropped frames
where none are expected.

Change the behavior so that the driver default is 3 if we do not get any
DCBX convergence.

If DCBX does converge, then set the FIP/FCoE priority in the following
manner:

 1. If the qedf_default_prio modparam is set use that
 2. If the DCBX FCoE priority is not in range (0..7) use 3
 3. Use the DCBX FCoE priority we get in the driver's DCBX handler

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
ba17d379c2 scsi: qedf: Add dcbx_not_wait module parameter so we won't wait for DCBX convergence to start discovery
This module parameter is to work around cases where we do not receive
the DCBX handler notification from qed but discovery is still possible
if we send out a FIP VLAN request irregardless of the DCBX state.

[mkp: zeroday warning]

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
a93755cf7e scsi: qedf: Sanity check FCoE/FIP priority value to make sure it's between 0 and 7
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
766639cab0 scsi: qedf: Add check for offload before flushing I/Os for target
We need to check that a fcport is offloaded before we try to flush any
requests.  No doing so could lead to undefined results and most likely a
crash.

Fixes the oops:

[  343.971886] [0000:42:00.3]:[qedf_execute_tmf:2070]:8: wait for tm_cmpl timeout!
[  343.971933] BUG: unable to handle kernel paging request at 00000000000024a8
[  343.971949] IP: [<ffffffffa06b8cc6>] qedf_flush_active_ios+0x46/0x260 [qedf]
[  343.971952] PGD 42c569067 PUD 4160fe067 PMD 0
[  343.971954] Oops: 0000 [#1] SMP
[  343.972008] Modules linked in: qedf(OEX) qed(OEX) bnx2i cnic fuse af_packet iscsi_ibft msr xfs intel_rapl sb_edac edac_core x86_pkg_temp_thermal bnx2x geneve intel_powerclamp vxlan coretemp ipmi_ssif ipmi_devintf kvm_intel kvm libiscsi joydev irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel tg3 ip6_udp_tunnel udp_tunnel mdio libcrc32c iTCO_wdt scsi_transport_iscsi uio drbg iTCO_vendor_support iscsi_boot_sysfs dcdbas(X) ipmi_si ansi_cprng aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper ptp pps_core pcspkr libphy lpc_ich mfd_core cryptd fjes wmi ipmi_msghandler button crc8 libfcoe libfc scsi_transport_fc mei_me mei shpchp processor acpi_pad btrfs xor hid_generic usbhid raid6_pq sd_mod sr_mod cdrom mgag200 crc32c_intel i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt
[  343.972020]  fb_sys_fops ttm ahci ehci_pci libahci ehci_hcd drm libata usbcore megaraid_sas usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 [last unloaded: qedf]
[  343.972022] Supported: Yes, External
[  343.972026] CPU: 30 PID: 12777 Comm: sg_reset Tainted: G        W  OE    X 4.4.73-5-default #1
[  343.972027] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.1.3 11/20/2013
[  343.972029] task: ffff88018dfc0e80 ti: ffff88042bd7c000 task.ti: ffff88042bd7c000
[  343.972036] RIP: 0010:[<ffffffffa06b8cc6>]  [<ffffffffa06b8cc6>] qedf_flush_active_ios+0x46/0x260 [qedf]
[  343.972038] RSP: 0018:ffff88042bd7fbe0  EFLAGS: 00010286
[  343.972039] RAX: 0000000000000000 RBX: ffff88042ce37800 RCX: 0000000000000400
[  343.972040] RDX: 000000000000060e RSI: ffffffffa06be830 RDI: ffff8807e5072cc0
[  343.972041] RBP: 0000000000001000 R08: ffffffffa06bff4d R09: ffff88018dd84580
[  343.972042] R10: 000000000000018b R11: 0000000000000002 R12: 0000000000002003
[  343.972043] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8807e5072cc0
[  343.972046] FS:  00007fc1c8809700(0000) GS:ffff88042fbc0000(0000) knlGS:0000000000000000
[  343.972048] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.972049] CR2: 00000000000024a8 CR3: 00000004236ec000 CR4: 00000000001406e0
[  343.972050] Stack:
[  343.972053]  504c78750607e154 ffffffff810a7d10 ffff88042ce37800 0000000000000010
[  343.972055]  0000000000002003 ffff8807ff480c48 ffff8807e5072cc0 ffffc90004ec4ff8
[  343.972057]  ffffffffa06b9b86 ffff880800000010 0000000000000282 ffff88042ce37800
[  343.972058] Call Trace:
[  343.972094]  [<ffffffffa06b9b86>] qedf_initiate_tmf+0x346/0x3e0 [qedf]
[  343.972120]  [<ffffffffa000fa06>] scsi_try_bus_device_reset+0x26/0x40 [scsi_mod]
[  343.972133]  [<ffffffffa001038e>] scsi_ioctl_reset+0x13e/0x260 [scsi_mod]
[  343.972145]  [<ffffffffa000f416>] scsi_ioctl+0x136/0x3d0 [scsi_mod]
[  343.972154]  [<ffffffff812ff6eb>] blkdev_ioctl+0x6bb/0x950
[  343.972164]  [<ffffffff8123cfed>] block_ioctl+0x3d/0x40
[  343.972170]  [<ffffffff81217e2d>] do_vfs_ioctl+0x2cd/0x4a0
[  343.972186]  [<ffffffff81218074>] SyS_ioctl+0x74/0x80
[  343.972193]  [<ffffffff8160916e>] entry_SYSCALL_64_fastpath+0x12/0x6d
[  343.975285] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x12/0x6d

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
15a93de7e9 scsi: qedf: Fix VLAN display when printing sent FIP frames
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:10 -04:00
Chad Dupuis
f32803bb45 scsi: qedf: Add missing skb frees in error path
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:09 -04:00
Chad Dupuis
c3ef86f3ec scsi: qedf: Increase the number of default FIP VLAN request retries to 60
Some configurations need more than 30 seconds to respond to a FIP VLAN
request so increase the default to 60 seconds.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:09 -04:00
Chad Dupuis
44c7c85911 scsi: qedf: Synchronize rport restarts when multiple ELS commands time out
If multiple ELS commands time out, such as aborts, they could all try to
restart the same rport and the same time.  This could mean multiple
multiple processes trying to clean up any outstanding commands or trying
to upload the same port.

Add a new flag (QEDF_RPORT_IN_RESET) and check other fcport state flags
before trying to reset the port.

Fixes the crash:

[17501.824701] ------------[ cut here ]------------
[17501.824733] kernel BUG at include/asm-generic/dma-mapping-common.h:65!
[17501.824760] invalid opcode: 0000 [#1] SMP
[17501.824781] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ses enclosure dm_service_time vfat fat sb_edac edac_core intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass joydev btrfs hpilo raid6_pq iTCO_wdt iTCO_vendor_support xor hpwdt ipmi_ssif sg crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul ioatdma lpc_ich glue_helper ablk_helper i2c_i801 shpchp cryptd ipmi_si pcspkr acpi_power_meter ipmi_devintf pcc_cpufreq dca wmi ipmi_msghandler dm_multipath nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod
[17501.825119]  crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qedf(OE) drm libfcoe ahci qedi(OE) crct10dif_pclmul libfc libahci uio crct10dif_common crc32c_intel libiscsi libata scsi_transport_iscsi scsi_transport_fc tg3 qede(OE) scsi_tgt hpsa qed(OE) i2c_core ptp scsi_transport_sas pps_core iscsi_boot_sysfs dm_mirror dm_region_hash dm_log dm_mod
[17501.825292] CPU: 8 PID: 10531 Comm: kworker/u96:1 Tainted: G           OE  ------------   3.10.0-693.el7.x86_64 #1
[17501.825330] Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 06/02/2016
[17501.825372] Workqueue: fc_rport_eq fc_rport_work [libfc]
[17501.825395] task: ffff88101bca8000 ti: ffff881025278000 task.ti: ffff881025278000
[17501.825424] RIP: 0010:[<ffffffffc042def9>]  [<ffffffffc042def9>] qedf_unmap_sg_list.isra.15+0x89/0x90 [qedf]
[17501.825471] RSP: 0018:ffff88102527bb98  EFLAGS: 00010212
[17501.825493] RAX: ffff8800224eac00 RBX: ffffc9000cd05210 RCX: 0000000000001000
[17501.825520] RDX: 000000007e655e40 RSI: 0000000000001000 RDI: ffff88107fe3b098
[17501.826683] RBP: ffff88102527bba0 R08: ffffffff81a13200 R09: 0000000000000286
[17501.827747] R10: 0000000000000004 R11: 0000000000000005 R12: ffffc9000cd051b8
[17501.828804] R13: ffff881037640c28 R14: 0000000000000007 R15: ffffc9000cd05200
[17501.829850] FS:  0000000000000000(0000) GS:ffff88103fa00000(0000) knlGS:0000000000000000
[17501.830910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[17501.831966] CR2: 00007f9b94005f38 CR3: 00000000019f2000 CR4: 00000000003407e0
[17501.833027] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[17501.834087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[17501.835142] Stack:
[17501.836201]  ffff881033ddbb80 ffff88102527bc30 ffffffffc042f834 0000000000002710
[17501.837264]  ffff88102527bbd0 ffffffff8133d9dd ffffc9000cd052a0 ffff88102527bc30
[17501.838325]  ffffffff816a9c65 0000000000000001 ffff88101bca8000 ffffffff810c4810
[17501.839388] Call Trace:
[17501.840446]  [<ffffffffc042f834>] qedf_scsi_done+0x54/0x1d0 [qedf]
[17501.841504]  [<ffffffff8133d9dd>] ? list_del+0xd/0x30
[17501.842537]  [<ffffffff816a9c65>] ? wait_for_completion_timeout+0x125/0x140
[17501.843560]  [<ffffffff810c4810>] ? wake_up_state+0x20/0x20
[17501.844577]  [<ffffffffc0430311>] qedf_initiate_cleanup+0x2e1/0x310 [qedf]
[17501.845587]  [<ffffffffc04305fe>] qedf_flush_active_ios+0x10e/0x260 [qedf]
[17501.846612]  [<ffffffffc042892f>] qedf_cleanup_fcport+0x5f/0x370 [qedf]
[17501.847613]  [<ffffffffc04292d8>] qedf_rport_event_handler+0x398/0x950 [qedf]
[17501.848602]  [<ffffffff810cdc7c>] ? dequeue_entity+0x11c/0x5d0
[17501.849581]  [<ffffffff81098a2b>] ? __internal_add_timer+0xab/0x130
[17501.850555]  [<ffffffff810ce54e>] ? dequeue_task_fair+0x41e/0x660
[17501.851528]  [<ffffffffc03241a4>] fc_rport_work+0xf4/0x6c0 [libfc]
[17501.852490]  [<ffffffff810a881a>] process_one_work+0x17a/0x440
[17501.853446]  [<ffffffff810a94e6>] worker_thread+0x126/0x3c0

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:57:09 -04:00
Arnd Bergmann
a8db6140d7 scsi: qedf: use correct strncpy() size
gcc-8 warns during link-time optimization that the strncpy() call passes
the size of the source buffer rather than the destination:

drivers/scsi/qedf/qedf_dbg.c: In function 'qedf_uevent_emit':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes it to strscpy() with the correct length, guaranteeing a
properly nul-terminated string of the right size.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13 21:37:02 -05:00
Arnd Bergmann
d9ea463a1c scsi: qedf: fix LTO-enabled build
The prototype for qedf_dbg_fops/qedf_debugfs_ops doesn't match the definition,
which causes the final link to fail with link-time optimizations:

drivers/scsi/qedf/qedf_main.c:34: error: type of 'qedf_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch]
 extern struct file_operations qedf_dbg_fops;

drivers/scsi/qedf/qedf_debugfs.c:443: note: 'qedf_dbg_fops' was previously declared here
 const struct file_operations qedf_dbg_fops[] = {

drivers/scsi/qedf/qedf_main.c:33: error: type of 'qedf_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch]
 extern struct qedf_debugfs_ops qedf_debugfs_ops;

drivers/scsi/qedf/qedf_debugfs.c:102: note: 'qedf_debugfs_ops' was previously declared here
 struct qedf_debugfs_ops qedf_debugfs_ops[] = {

This corrects the prototype and moves it into a shared header file where it
belongs. The file operations can also be marked 'const' like the
qedf_debugfs_ops.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13 21:37:01 -05:00
Colin Ian King
8d6febb0cc scsi: qedf: remove redundant initialization of 'fcport'
Pointer fcport is initialized with a value that is never read, it is
re-assigned a new value later on, hence the initialization is redundant
and can be removed.

Cleans up clang warning:
drivers/scsi/qedf/qedf_io.c:920:21: warning: Value stored to 'fcport'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13 21:37:00 -05:00
Linus Torvalds
b2fe5fa686 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...
2018-01-31 14:31:10 -08:00
Wei Yongjun
e89cabf26e scsi: qedf: Fix error return code in __qedf_probe()
Fix to return error code -ENOMEM from the error handling case instead of
0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-22 20:03:56 -05:00
Tomer Tayar
41e87c91f4 qed*: Advance drivers' version to 8.33.0.20
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:16 -05:00
Tomer Tayar
da09091732 qed*: Utilize FW 8.33.1.0
Advance the qed* drivers to use firmware 8.33.1.0:
Modify core driver (qed) to utilize the new FW and initialize the device
with it. This is the lion's share of the patch, and includes changes to FW
interface files, device initialization flows, FW interaction flows, and
debug collection flows.
Modify Ethernet driver (qede) to make use of new FW in fastpath.
Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath.
Modify FCoE driver (qedf) to make use of new FW in fastpath.
Modify iSCSI driver (qedi) to make use of new FW in fastpath.

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:16 -05:00
Tomer Tayar
21dd79e82f qed*: HSI renaming for different types of HW
This patch renames defines and structures in the FW HSI files to allow a
distinction between different types of HW.

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:15 -05:00
James Bottomley
2441500a41 Merge branch 'fixes' into misc 2017-09-07 12:12:43 -07:00
Hannes Reinecke
a81ac3b046 scsi: qedf: drop bus reset handler
qedf has a host reset handler, but as the bus reset handler is a stub
always returning SUCCESS the host reset is never invoked.  So drop the
bus reset handler.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25 17:21:11 -04:00
Chad Dupuis
b7fa2cbda5 scsi: qedf: Update driver version to 8.20.5.0.
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:04 -04:00
Chad Dupuis
0516abdf2d scsi: qedf: Fix up modinfo parameter name for 'debug' in modinfo output.
Because we were passing 'qedf_debug' instead of 'debug' to the
MODULE_PARM_DESC() macro, modinfo listed the parameter name as 'qedf_debug'
instead of it's proper name 'debug'.  Correct the parameter name.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:04 -04:00
Chad Dupuis
428ca6423e scsi: qedf: Covert single-threaded workqueues to regular workqueues.
There is no ordering required for the various workqueues the driver uses
so they can be converted to regular workqueues.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:03 -04:00
Chad Dupuis
cf29116375 scsi: qedf: Corrent VLAN tag insertion in fallback VLAN case.
Currently in the driver the qedf_ctx attribute vlan_hw_insert is used to
which whether to insert a VLAN tag in FIP frames (except for FIP VLAN
request which is explicitly sent out untagged at least from the driver's
point of view).

When we receive a FIP VLAN response, we set qedf->vlan_hw_insert to 0 which
makes the qedf_fip_send function insert the VLAN.  However when we exhaust
our FIP VLAN retries, we do not set qedf->vlan_hw_insert to 0 which means
that the driver will not tag the FIP frame with the correct VLAN ID.  The
result that was observed on the wire is that some entity either in the LL2
or L2 firmware is adding a NULL VLAN tag which can cause FIP solicitation
to fail.

The offload FCoE frame function, qedf_xmit, does not use the vlan_hw_insert
attribute to decide whether to tag frames with the FIP/FCoE VLAN.  Instead
it unilaterially tags the offload frames with the VLAN ID stored in
qedf->vlan_id. This is the correct behavior so the driver can guarantee
that non-offload FIP frames go out with the correct VLAN ID.

Also use the Linux network layer helpers instead of doing the VLAN insert
manually.

Also fix setting the fallback VLAN so that it used the module parameter and
is not hardcoded to 1002 (though 1002 is the default).

[mkp: fixed typo]

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:03 -04:00
Chad Dupuis
a3cd42a9d6 scsi: qedf: Use granted MAC from the FCF for the FCoE source address if it is available.
Currently in the driver we've been using the fc_fcoe_set_mac() function to
set the source MAC for FCoE traffic.  This works well in most cases as it
uses the spec. default FCF-MAC.  However, if the administrator changes the
FCF-MAC switch, then any FCoE traffic we send will be dropped by the
switch.

Instead we should check the granted MAC from the FLOGI payload and use that
address if it is present.  Otherwise, fall back to using the the default
FCF-MAC and the fabric ID of the port as the FCoE MAC address.

Once this address is known we need to set it when doing non-offload
traffic, offload traffic and setting the data_src_address libfcoe uses for
FIP keep alive messages.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:02 -04:00
Chad Dupuis
01fd76a765 scsi: qedf: Set WWNN and WWPN based on values from qed.
If dev_info.wwpn and dev_info.wwnn are set by qed use these values to set
the WWNs of the port. Otherwise fall back to the old method using
fcoe_wwn_from_mac().

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:02 -04:00
Christophe JAILLET
47c4ccd308 scsi: qedf: Fix a potential NULL pointer dereference
At the beginning of 'qedf_srr_compl()' and of 'qedf_rec_compl()', we
check if 'orig_io_req' is NULL. If this happens, a NULL pointer
dereference will occur in the error handling path.

Fix it by adding an additional label in the error handling path in order
to avoid this NULL pointer dereference.

[mkp: typo]

Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-23 22:42:41 -04:00
Thomas Bogendoerfer
722477c4f2 scsi: qedf: Limit number of CQs
FCOE offloading failed with:

[qed_sp_fcoe_func_start:150(sp-0-3b:00.02)]Cannot satisfy CQ amount. CQs
		 requested 8, CQs available 6. Aborting function start
[qed_fcoe_start:821()]Failed to start fcoe
[__qedf_probe:3041]:6: Cannot start FCoE function.

The reason is a newly introduced check in the qed main part. This change
also provides the information about how many CQs are available, so we
simply limit the number of requested CQs..

Fixes: 3c5da94278 ("qed: Share additional information with qedf")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-26 22:00:39 -04:00
Colin Ian King
acef2690d1 scsi: qedf: fix spelling mistake: "offlading" -> "offloading"
Trivial fix to spelling mistake in QEDF_INFO message and remove
duplicated "since" (thanks to Tyrel Datwyler for spotting the latter
issue).

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-12 17:11:59 -04:00
Linus Torvalds
9031114841 SCSI misc on 20170704
This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
 qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
 a host of minor and miscellaneous changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZW7JMAAoJEAVr7HOZEZN4IM4P/AqBtvH+6Lo1Eb+3A/HnHskK
 hIxVxgBxaw3fhW5AegDfVCvrdVTTEkCB/g5CIKN8NCWEx6OGmCX0Lu6lnjld9BOZ
 cTlPtzNwFGlgHrz34LwCc3vlc5ovMpTQBrpGAQpGGWoAZIP+c3ilEihIYTEMNCsN
 dmjI71AigDE5g6X1OT361IJ1gydkjfG41IcRe/jlMtEgRNdy3B2JVIdATL89Pw4b
 0uZO3uUTn8EGEKUdyJZCNpie7sGZv8u2LhA+Znby2C4h3bwWNV/d0p7ped4xrQY5
 yVpZEUbYVdcOOYBgeBJlfwOhvjRQTdxeK4d7W9XTb+AQf30F3DgSepdMCdf3BjVt
 KnQvBOTxyidB8xsCL46wlxxNew3qoUtaKoY88WUOOnnJwU5U7hlRtPkf/eO2i5QF
 +k7fxUpFfkBTS4I2gXnyGWpmSoxwJerd0knojSOjrjJcAlcgM65+pocUAea/0Dpr
 SsfL2sTb12gk6bkF9UlRv8/4aSsWYb92WW1nbTt2nFRXncPNN5Qzc3lGj//36O+b
 2bka+aSKVAFoNAnQ1pUE8EJxSboy5q7y4509iZzO/Fom+pVuzBROm5fmrpcOE5dP
 IjW7gqSFB6578tnNiK049rrrPja5wkUa+Ptc8s0FjPAVyIDrp2RN+f2nljOBBhW8
 3Z1nXMG0eFqvb5taLtfZ
 =D9QX
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
  qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
  a host of minor and miscellaneous changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits)
  qla2xxx: Fix NVMe entry_type for iocb packet on BE system
  scsi: qla2xxx: avoid unused-function warning
  scsi: snic: fix a couple of spelling mistakes/typos
  scsi: qla2xxx: fix a bunch of typos and spelling mistakes
  scsi: lpfc: don't double count abort errors
  scsi: lpfc: spin_lock_irq() is not nestable
  scsi: hisi_sas: optimise DMA slot memory
  scsi: ibmvfc: constify dev_pm_ops structures.
  scsi: ibmvscsi: constify dev_pm_ops structures.
  scsi: cxlflash: Update debug prints in reset handlers
  scsi: cxlflash: Update send_tmf() parameters
  scsi: cxlflash: Avoid double free of character device
  scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state
  scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
  scsi: ufs: flush eh_work when eh_work scheduled.
  scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock
  scsi: sun_esp: fix device reference leaks
  scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init
  scsi: fnic: correct speed display and add support for 25,40 and 100G
  scsi: fnic: added timestamp reporting in fnic debug stats
  ...
2017-07-06 12:10:33 -07:00
Johannes Berg
d58ff35122 networking: make skb_push & __skb_push return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

    @@
    expression SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - fn(SKB, LEN)[0]
    + *(u8 *)fn(SKB, LEN)

Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:40 -04:00
Johannes Berg
af72868b90 networking: make skb_pull & friends return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = {
            skb_pull,
            __skb_pull,
            skb_pull_inline,
            __pskb_pull_tail,
            __pskb_pull,
            pskb_pull
    };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = {
            skb_pull,
            __skb_pull,
            skb_pull_inline,
            __pskb_pull_tail,
            __pskb_pull,
            pskb_pull
    };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:39 -04:00
Johannes Berg
4df864c1d9 networking: make skb_put & friends return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_put, __skb_put };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_put, __skb_put };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

which actually doesn't cover pskb_put since there are only three
users overall.

A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:39 -04:00
Christophe JAILLET
32eebb317f scsi: qedf: Merge a few quoted strings split across lines
Merge some quoted strings to improve readability and to save some lines
of code.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 21:21:45 -04:00
Christophe JAILLET
c4d6ffc846 scsi: qedf: Use 'dma_zalloc_coherent' to reduce code verbosity.
Replace some 'dma_alloc_coherent+memset' by some quivalent
'dma_zalloc_coherent' in order to reduce code verbosity

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 21:21:22 -04:00
Christophe JAILLET
3a240b21b5 scsi: qedf: Fix a return value in case of error in 'qedf_alloc_global_queues'
We should return -ENOMEM in case of memory allocation error, as done
elsewhere in this function.

[mkp: fixed typo]

Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 21:20:40 -04:00
Dupuis, Chad
16a611154d scsi: qedf: Check if sense buffer has been allocated during completion
sc_cmd->sense_buffer is not guaranteed to be allocated so we need to
sc_cmd->check
if the pointer is NULL before trying to copy anything into it.

Fixes the crash:

[  143.793176] [0000:00:00.0]:[qedf_eh_device_reset:626]: LUN RESET Issued...
[  143.802996] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  143.803063] IP: qedf_parse_fcp_rsp+0xe2/0x290 [qedf]
[  143.803077] PGD 0
[  143.803078] P4D 0

[  143.803103] Oops: 0002 [#1] SMP
[  143.803115] Modules linked in: msr(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) raw(E) scsi_transport_iscsi(E) br_netfilter(E) bridge(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl(E) sb_edac(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) xfs(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) ipmi_ssif(E) glue_helper(E) iTCO_wdt(E) iTCO_vendor_support(E) lpc_ich(E) ipmi_si(E) pcspkr(E) hpilo(E) ioatdma(E) cryptd(E) ipmi_devintf(E) hpwdt(E) mfd_core(E) shpchp(E) dca(E) thermal(E) pcc_cpufreq(E) ipmi_msghandler(E) acpi_cpufreq(E) af_packet(E) btrfs(E) xor(E) raid6_pq(E) sr_mod(E) cdrom(E) ata_generic(E) sd_mod(E) 8021q(E) garp(E)
[  143.803302]  stp(E) llc(E) mrp(E) bnx2fc(E) cnic(E) uio(E) mgag200(E) ata_piix(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) ahci(E) fb_sys_fops(E) bnx2x(E) qedf(E) serio_raw(E) libahci(E) ttm(E) uhci_hcd(E) ehci_pci(E) qed(E) mdio(E) libcrc32c(E) ehci_hcd(E) crc32c_intel(E) drm(E) libata(E) usbcore(E) tg3(E) ptp(E) hpsa(E) pps_core(E) scsi_transport_sas(E) libphy(E) wmi(E) button(E) fcoe(E) libfcoe(E) libfc(E) scsi_transport_fc(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E)
[  143.803438] CPU: 31 PID: 494 Comm: kworker/31:2 Tainted: G            E   4.12.0-rc1-69-default+ #1
[  143.803461] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
[  143.803480] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
[  143.803496] task: ffff8804181a0000 task.stack: ffffc90003b64000
[  143.803514] RIP: 0010:qedf_parse_fcp_rsp+0xe2/0x290 [qedf]
[  143.803529] RSP: 0018:ffffc90003b67dc8 EFLAGS: 00010246
[  143.803544] RAX: 0000000000000000 RBX: ffff880401abdd48 RCX: 000000000000000c
[  143.803563] RDX: 0000000000000060 RSI: ffffffffa039c740 RDI: 0000000000000000
[  143.803581] RBP: ffffc90003b67df0 R08: ffffffffa039dba8 R09: 0000000000000000
[  143.803600] R10: 0000000000000000 R11: 0000000000000018 R12: 0000000000000000
[  143.803619] R13: ffff88040ac80bc8 R14: 0000000000000008 R15: ffff880407c14008
[  143.803638] FS:  0000000000000000(0000) GS:ffff88043f7c0000(0000) knlGS:0000000000000000
[  143.804360] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  143.805065] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000000406e0
[  143.805753] Call Trace:
[  143.806436]  qedf_process_tmf_compl+0x19/0x30 [qedf]
[  143.807124]  qedf_process_cqe+0x265/0x280 [qedf]
[  143.807800]  qedf_fp_io_handler+0x26/0x60 [qedf]
[  143.808469]  process_one_work+0x138/0x370
[  143.809133]  worker_thread+0x4d/0x3b0
[  143.809797]  kthread+0x109/0x140
[  143.810451]  ? rescuer_thread+0x320/0x320
[  143.811100]  ? kthread_park+0x60/0x60
[  143.811743]  ret_from_fork+0x2c/0x40

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:08 -04:00
Chad Dupuis
e2e2c7da4b scsi: qedf: Update version number to 8.18.22.0.
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
6088cfaafb scsi: qedf: Add change_queue_depth member to scsi_host_template().
Add the change_queue_depth member to our SCSI host template so the queue
depth of devices attached to qedf can be changed dynamically.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
a7746f1e01 scsi: qedf: Change cmd_per_lun in scsi_host_template to 32 to increase performance.
Increase the default number of commands that the driver tells the
SCSI mid-layer it can do to increase the default performance of the
driver.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
f7e8d57be1 scsi: qedf: Move some prints to a debug level so they do not print when no debugging is enabled.
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
57a3548a01 scsi: qedf: Fixup unnecessary parantheses around test_bit operations.
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
384d5a9b41 scsi: qedf: Add non-offload receive filters.
Drop invalid or unexpected FCoE frames that come into the non-offload path
since the FCoE firmware would not do the filtering for us.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
b09fdc3aac scsi: qedf: Add bus_reset No-op.
We need to add a bus reset no-op as without it some of the LUNs attached to a
vport may go offline when the error handler escalates to host reset due to not
having a bus reset handler in the driver. What happens is we escalate to host
reset which does a soft link down/link up to reset the adapter. However with
multiple vports attached it's been observed that if the vports do log back into
the target within 5 seconds, the SCSI layer offlines the devices most likely
due to a TUR timing out to verify that the device is online. Adding a bus
reset handler will cause the TUR to be sent after the bus reset handler where
the devices will still be online if the bus reset is initiated by sg_reset
(which is the case in the test that was failing). The bus reset will succeed
and not needlessly bring the device offline/online.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
5cf446d2aa scsi: qedf: Use same logic for SCSI host reset and FC lip_reset.
We should be using the same logic to do a soft reset of the FCoE function
whether it is initiated via sg_reset or the fc_host issue_lip attribute.
Refactor the host reset and fcoe reset handlers to use the preferred logic
which is currently contained in qedf_eh_host_reset().

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
2b82a62f52 scsi: qedf: Set qed logging level to QED_LEVEL_NOTICE.
Reduce the logging level we set for qed messages pertaining to this PCI
function so that unnecessary messages are not printed in the kernel
message log.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
c07c54b0cb scsi: qedf: Add fka_period SCSI host attribute to show fip keep alive period.
Expose this information for interested applications.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
ff34e8e84f scsi: qedf: Check that fcport is offloaded before dereferencing pointers in initiate_abts|cleanup.
If an fcport is not offloaded then the members of the qedf_rport struct
are undefined which may cause a system crash.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00
Chad Dupuis
53c51adbe6 scsi: qedf: Look at all descriptors when processing a clear virtual link.
If there are multiple descriptors for a particular type in a clear virtual
link we receive, we will not process it correctly but rather take the last
value. This can cause us not to not flap the virtual link as the value from
the descriptors that we compare against the our stored FCF or fc_lport values
may not match.

Change this to do a comparison when processing the each descriptor instead of at
the end and then set a bool if we need to do the reset.

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:48:06 -04:00