If BCH_FS_may_go_rw is not yet set, it indicates to the transaction
commit path that updates should be done via the list of journal replay
keys.
This must be set before multithreaded use commences.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a btree split picks a pivot that's being deleted by a btree node
merge, we're going to have problems.
Fix this by checking if the pivot is being deleted, the same as we check
for deletions in journal replay keys.
Found by single_devic.ktest small_nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Syzbot found an assertion pop, by generating an ancient filesystem
version with an invalid bkey_format (with fields that can overflow) as
well as packed keys that aren't representable unpacked.
This breaks key comparisons in all sorts of painful ways.
Filesystems have been automatically rewriting nodes with such invalid
formats for years; we can safely drop support for them.
Reported-by: syzbot+8a0109511de9d4b61217@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bucket_gen() checks if we're lookup up a valid bucket and returns NULL
otherwise, but bucket_gen_get() was failing to check; other callers were
correct.
Also do a bit of cleanup on callers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I noticed that recently, simple operations like "make" started
failing on NFSv3 mounts of ext4 exports. Network capture shows that
READDIRPLUS operated correctly but READDIR failed with
NFS3ERR_INVAL. The vfs_llseek() call returned EINVAL when it is
passed a non-zero starting directory cookie.
I bisected to commit c689bdd3bf ("nfsd: further centralize
protocol version checks.").
Turns out that nfsd3_proc_readdir() does not call fh_verify() before
it calls nfsd_readdir(), so the new fhp->fh_64bit_cookies boolean is
not set properly. This leaves the NFSD_MAY_64BIT_COOKIE unset when
the directory is opened.
For ext4, this causes the wrong "max file size" value to be used
when sanity checking the incoming directory cookie (which is a seek
offset value).
The fhp->fh_64bit_cookies boolean is /always/ properly initialized
after nfsd_open() returns. There doesn't seem to be a reason for the
generic NFSD open helper to handle the f_mode fix-up for
directories, so just move that to the one caller that tries to open
an S_IFDIR with NFSD_MAY_64BIT_COOKIE.
Suggested-by: NeilBrown <neilb@suse.de>
Fixes: c689bdd3bf ("nfsd: further centralize protocol version checks.")
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The dealloc flag may be cleared and the extent won't reach the disk in
cow_file_range when errors path. The reserved qgroup space is freed in
commit 30479f31d4 ("btrfs: fix qgroup reserve leaks in
cow_file_range"). However, the length of untouched region to free needs
to be adjusted with the correct remaining region size.
Fixes: 30479f31d4 ("btrfs: fix qgroup reserve leaks in cow_file_range")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead.
Fixes: 1d57ee9416 ("btrfs: improve delayed refs iterations")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With util-linux 2.40.2, the 'mount' utility is already utilizing the new
mount API. e.g:
# strace mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test/
...
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
But this leads to a new problem, that per-subvolume RO/RW mount no
longer works, if the initial mount is RO:
# mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test
# mount -o rw,subvol=subv2 /dev/test/scratch1 /mnt/scratch
# mount | grep mnt
/dev/mapper/test-scratch1 on /mnt/test type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=256,subvol=/subv1)
/dev/mapper/test-scratch1 on /mnt/scratch type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=257,subvol=/subv2)
# touch /mnt/scratch/foobar
touch: cannot touch '/mnt/scratch/foobar': Read-only file system
This is a common use cases on distros.
[CAUSE]
We have a workaround for remount to handle the RO->RW change, but if the
mount is using the new mount API, we do not do that, and rely on the
mount tool NOT to set the ro flag.
But that's not how the mount tool is doing for the new API:
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0 <<<< Setting RO flag for super block
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
This means we will set the super block RO at the first mount.
Later RW mount will not try to reconfigure the fs to RW because the
mount tool is already using the new API.
This totally breaks the per-subvolume RO/RW mount behavior.
[FIX]
Do not skip the reconfiguration even if using the new API. The old
comments are just expecting any mount tool to properly skip the RO flag
set even if we specify "ro", which is not the reality.
Update the comments regarding the backward compatibility on the kernel
level so it works with old and new mount utilities.
CC: stable@vger.kernel.org # 6.8+
Fixes: f044b31867 ("btrfs: handle the ro->rw transition for mounting different subvolumes")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable Fixes:
* Fix KMSAN warning in decode_getfattr_attrs()
Other Bugfixes:
* Handle -ENOTCONN in xs_tcp_setup_socked()
* NFSv3: only use NFS timeout for MOUNT when protocols are compatible
* Fix attribute delegation behavior on exclusive create and a/mtime changes
* Fix localio to cope with racing nfs_local_probe()
* Avoid i_lock contention in fs_clear_invalid_mapping()
-----BEGIN PGP SIGNATURE-----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=9mwu
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These are mostly fixes that came up during the nfs bakeathon the other
week.
Stable Fixes:
- Fix KMSAN warning in decode_getfattr_attrs()
Other Bugfixes:
- Handle -ENOTCONN in xs_tcp_setup_socked()
- NFSv3: only use NFS timeout for MOUNT when protocols are compatible
- Fix attribute delegation behavior on exclusive create and a/mtime
changes
- Fix localio to cope with racing nfs_local_probe()
- Avoid i_lock contention in fs_clear_invalid_mapping()"
* tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: avoid i_lock contention in nfs_clear_invalid_mapping
nfs_common: fix localio to cope with racing nfs_local_probe()
NFS: Further fixes to attribute delegation a/mtime changes
NFS: Fix attribute delegation behaviour on exclusive create
nfs: Fix KMSAN warning in decode_getfattr_attrs()
NFSv3: only use NFS timeout for MOUNT when protocols are compatible
sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()
The commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility.
It is ignored when it is set. Fix the code so that it recognises the
option again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZyuidRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsgQAQDuV0x4RLpCrrowDS/ITQw/eb/WjhR7
lhkXVROLN6RK6wD+JWmbaCP82q2S4A2Vx0Rjc72gUMmTzDb1HQflhQiLhwU=
=0dZF
-----END PGP SIGNATURE-----
Merge tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
Curretly in function generic_listxattr the for_each_xattr_handler loop
checks err and will return out of the function if err is non-zero.
It's impossible for err to be non-zero at the end of the function where
err is checked again for a non-zero value. The final non-zero check is
therefore redundant and can be removed. Also move the declaration of
err into the loop.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
switch path_removexattrat() and fremovexattr(2) to those
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
switch path_listxattr() and flistxattr(2) to those
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
similar to do_setxattr() in the previous commit...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
io_uring setxattr logics duplicates stuff from fs/xattr.c; provide
saner helpers (filename_setxattr() and file_setxattr() resp.) and
use them.
NB: putname(ERR_PTR()) is a no-op
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the struct xattr_ctx to increase distinction with the about to be
added user API struct xattr_args.
No functional change.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-2-cgoettsche@seltendoof.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
atomic writes is currently only supported for single fsblock and only
for direct-io. We should not return -ENOTBLK for atomic writes since we
want the atomic write request to either complete fully or fail
otherwise. Hence, we should never fallback to buffered-io in case of
DIO atomic write requests.
Let's also catch if this ever happens by adding some WARN_ON_ONCE before
buffered-io handling for direct-io atomic writes. More details of the
discussion [1].
While at it let's add an inline helper ext4_want_directio_fallback() which
simplifies the logic checks and inherently fixes condition on when to return
-ENOTBLK which otherwise was always returning true for any write or directio in
ext4_iomap_end(). It was ok since ext4 only supports direct-io via iomap.
[1]: https://lore.kernel.org/linux-xfs/cover.1729825985.git.ritesh.list@gmail.com/T/#m9dbecc11bed713ed0d7a486432c56b105b555f04
Suggested-by: Darrick J. Wong <djwong@kernel.org> # inline helper
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
FS needs to add the fmode capability in order to support atomic writes
during file open (refer kiocb_set_rw_flags()). Set this capability on
a regular file if ext4 can do atomic write.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Let's validate the given constraints for atomic write request.
Otherwise it will fail with -EINVAL. Currently atomic write is only
supported on DIO, so for buffered-io it will return -EOPNOTSUPP.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
This patch adds base support for atomic writes via statx getattr.
On bs < ps systems, we can create FS with say bs of 16k. That means
both atomic write min and max unit can be set to 16k for supporting
atomic writes.
Co-developed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
We need to pass pages, not folios, to crypt_extent() as we may be
working with a plain page rather than a folio. But we need to know the
index in the file, so pass it in from the caller.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241025190822.1319162-11-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove ecryptfs_get_locked_page() and call read_mapping_folio()
directly. Use the folio throught this function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241025190822.1319162-6-willy@infradead.org
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All callers have a folio, so pass it in and use it directly. This will
not work for large folios, but I doubt anybody wants to use large folios
with ecryptfs.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241025190822.1319162-5-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Both callers have a folio, so pass it in and use it throughout.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241025190822.1319162-4-willy@infradead.org
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the conversion to a struct page. Removes a few hidden calls to
compound_head(). Use 'err' instead of 'rc' for clarity.
Also remove the unnecessary call to ClearPageUptodate(); the uptodate
flag is already clear if this function is being called. That lets us
switch to folio_end_read() which does one atomic flag operation instead
of two.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241025190822.1319162-3-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
By adding a ->migrate_folio implementation, theree is no need to keep
the ->writepage implementation. The new writepages removes the
unnecessary call to SetPageUptodate(); the folio should already be
uptodate at this point.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241025190822.1319162-2-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
If Client send simultaneous SMB operations to ksmbd, It exhausts too much
memory through the "ksmbd_work_cache”. It will cause OOM issue.
ksmbd has a credit mechanism but it can't handle this problem. This patch
add the check if it exceeds max credits to prevent this problem by assuming
that one smb request consumes at least one credit.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_user_session_put should be called under smb3_preauth_hash_rsp().
It will avoid freeing session before calling smb3_preauth_hash_rsp().
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race condition between ksmbd_smb2_session_create and
ksmbd_expire_session. This patch add missing sessions_table_lock
while adding/deleting session from global session table.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Set FMODE_CAN_ATOMIC_WRITE flag if we can atomic write for that inode.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> #On ppc64
Validate that an atomic write adheres to length/offset rules. Currently
we can only write a single FS block.
For an IOCB with IOCB_ATOMIC set to get as far as xfs_file_write_iter(),
FMODE_CAN_ATOMIC_WRITE will need to be set for the file; for this,
ATOMICWRITES flags would also need to be set for the inode.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Support providing info on atomic write unit min and max for an inode.
For simplicity, currently we limit the min at the FS block size. As for
max, we limit also at FS block size, as there is no current method to
guarantee extent alignment or granularity for regular files.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Support direct I/O atomic writes by producing a single bio with REQ_ATOMIC
flag set.
Initially FSes (XFS) should only support writing a single FS block
atomically.
As with any atomic write, we should produce a single bio which covers the
complete write length.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
[djwong: clarify a couple of things in the docs]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The XFS code will need this.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Multi-threaded buffered reads to the same file exposed significant
inode spinlock contention in nfs_clear_invalid_mapping().
Eliminate this spinlock contention by checking flags without locking,
instead using smp_rmb and smp_load_acquire accordingly, but then take
spinlock and double-check these inode flags.
Also refactor nfs_set_cache_invalid() slightly to use
smp_store_release() to pair with nfs_clear_invalid_mapping()'s
smp_load_acquire().
While this fix is beneficial for all multi-threaded buffered reads
issued by an NFS client, this issue was identified in the context of
surprisingly low LOCALIO performance with 4K multi-threaded buffered
read IO. This fix dramatically speeds up LOCALIO performance:
before: read: IOPS=1583k, BW=6182MiB/s (6482MB/s)(121GiB/20002msec)
after: read: IOPS=3046k, BW=11.6GiB/s (12.5GB/s)(232GiB/20001msec)
Fixes: 17dfeb9113 ("NFS: Fix races in nfs_revalidate_mapping")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Fix the possibility of racing nfs_local_probe() resulting in:
list_add double add: new=ffff8b99707f9f58, prev=ffff8b99707f9f58, next=ffffffffc0f30000.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Add nfs_uuid_init() to properly initialize all nfs_uuid_t members
(particularly its list_head).
Switch to returning bool from nfs_uuid_begin(), returns false if
nfs_uuid_t is already in-use (its list_head is on a list). Update
nfs_local_probe() to return early if the nfs_client's cl_uuid
(nfs_uuid_t) is in-use.
Also, switch nfs_uuid_begin() from using list_add_tail_rcu() to
list_add_tail() -- rculist was used in an earlier version of the
localio code that had a lockless nfs_uuid_lookup interface.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
When asked to set both an atime and an mtime to the current system time,
ensure that the setting is atomic by calling inode_update_timestamps()
only once with the appropriate flags.
Fixes: e12912d941 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
When the client does an exclusive create and the server decides to store
the verifier in the timestamps, a SETATTR is subsequently sent to fix up
those timestamps. When that is the case, suppress the exceptions for
attribute delegations in nfs4_bitmap_copy_adjust().
Fixes: 32215c1f89 ("NFSv4: Don't request atime/mtime/size if they are delegated to us")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
If a timeout is specified in the mount options, it currently applies to
both the NFS protocol and (with v3) the MOUNT protocol. This is
sensible when they both use the same underlying protocol, or those
protocols are compatible w.r.t timeouts as RDMA and TCP are.
However if, for example, NFS is using TCP and MOUNT is using UDP then
using the same timeout doesn't make much sense.
If you
mount -o vers=3,proto=tcp,mountproto=udp,timeo=600,retrans=5 \
server:/path /mountpoint
then the timeo=600 which was intended for the NFS/TCP request will
apply to the MOUNT/UDP requests with the result that there will only be
one request sent (because UDP has a maximum timeout of 60 seconds).
This is not what a reasonable person might expect.
This patch disables the sharing of timeout information in cases where
the underlying protocols are not compatible.
Fixes: c9301cb35b ("nfs: hornor timeo and retrans option when mounting NFSv3")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf19 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_connect+0x10c/0x6c8 [cifs]
__reconnect_target_unlocked+0xa0/0x214 [cifs]
reconnect_dfs_server+0x144/0x460 [cifs]
cifs_reconnect+0x88/0x148 [cifs]
cifs_readv_from_socket+0x230/0x430 [cifs]
cifs_read_from_socket+0x74/0xa8 [cifs]
cifs_demultiplex_thread+0xf8/0x704 [cifs]
kthread+0xd0/0xd4
Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264)
[1]:
CIFS_CRED="/root/cred.cifs"
CIFS_USER="Administrator"
CIFS_PASS="Password"
CIFS_IP="X.X.X.X"
CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST"
CIFS_MNT="/mnt/smb"
DEV="enp0s3"
cat <<EOF > ${CIFS_CRED}
username=${CIFS_USER}
password=${CIFS_PASS}
domain=EXAMPLE.COM
EOF
unshare -n bash -c "
mkdir -p ${CIFS_MNT}
ip netns attach root 1
ip link add eth0 type veth peer veth0 netns root
ip link set eth0 up
ip -n root link set veth0 up
ip addr add 192.168.0.2/24 dev eth0
ip -n root addr add 192.168.0.1/24 dev veth0
ip route add default via 192.168.0.1 dev eth0
ip netns exec root sysctl net.ipv4.ip_forward=1
ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1
touch ${CIFS_MNT}/a.txt
ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
"
umount ${CIFS_MNT}
[2]:
ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at
sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227)
inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1576)
generic_ip_connect (fs/smb/client/connect.c:3075)
cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798)
cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366)
dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285)
cifs_mount (fs/smb/client/connect.c:3622)
cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949)
smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794)
vfs_get_tree (fs/super.c:1800)
path_mount (fs/namespace.c:3508 fs/namespace.c:3834)
__x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fixes: 26abe14379 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The usual collection of singletons - please see the changelogs.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZyfGDAAKCRDdBJ7gKXxA
jr19AQD6bfDF/6L2Alq1QG26pgrgccEbKzDSzR6pBajwCbdrNQD/XPhiv3zRJfGf
lgt0Qkqwe/ApBhVYUnL8y1CePv3EDgA=
=W5W0
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
lift setting ->revents into the caller, so that failure exits (including
the early one) would be plain returns.
We need the scope of our struct fd to end before the store to ->revents,
since that's shared with the failure exits prior to the point where we
can do fdget().
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
take the logics from fdget() to fdput() into an inlined helper - with existing
wait_key_set() subsumed into that.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fdput() is followed by checking fatal_signal_pending() (and aborting
the loop in such case). fdput() is transposable with that check.
Yes, it'll probably end up with slightly fatter code (call after the
check has returned false + call on the almost never taken out-of-line path
instead of one call before the check), but it's not worth bothering with
explicit extra scope there (or dragging the check into the loop condition,
for that matter).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fdput() moved past mnt_drop_file_write(); harmless, if somewhat cringeworthy.
Reordering could be avoided either by adding an explicit scope or by making
mnt_drop_file_write() called via __cleanup.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fdput() can be transposed with add_{r,w}char() and inc_sysc{r,w}();
it's the same story as with do_readv()/do_writev(), only with
fdput() instead of fdput_pos().
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fdget_pos() for constructor, fdput_pos() for cleanup, all users of
fd..._pos() converted trivially.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Irregularity here is fdput() not in the same scope as fdget(); we could
just lift it out vmsplice_type() in vmsplice(2), but there's no much
point keeping vmsplice_type() separate after that...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
XFS_IOC_FD_TO_HANDLE can grab a reference to copied ->f_path and
let the file go; results in simpler control flow - cleanup is
the same for both "by descriptor" and "by pathname" cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fold timerfd_fget() into both callers to have fdget() and fdput() in
the same scope. Could be done in different ways, but this is probably
the smallest solution.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With few exceptions emptiness checks are done as fd_file(...) in boolean
context (usually something like if (!fd_file(f))...); those will be
taken care of later.
However, there's a couple of places where we do those checks as
'store fd_file(...) into a variable, then check if this variable is
NULL' and those are harder to spot.
Get rid of those now.
use fd_empty() instead of extracting file and then checking it for NULL.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* fix a sysbot reported crash on filestreams
* Reduce cpu time spent searching for extents in
a very fragmented FS
* Check for delayed allocations before setting extsize
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZyIMDwAKCRBGdaER5Qtf
pllxAYCkk+mtDTD5xBfOVGZWO5MMFz8HqYcro5wrSCzgL8HDmW29kXTBYFviGn3R
3l/H6BEBgOk0EkI5qGOzijpzbsWyJeLzPzZtxQFPD8zFBdxSERCtbpqFDLLvLQWG
M+TLhUNkPQ==
=kKX4
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.12-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- fix a sysbot reported crash on filestreams
- Reduce cpu time spent searching for extents in a very fragmented FS
- Check for delayed allocations before setting extsize
* tag 'xfs-6.12-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: streamline xfs_filestream_pick_ag
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
xfs: Reduce unnecessary searches when searching for the best extents
xfs: Check for delayed allocations before setting extsize
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZyTGVAAKCRCRxhvAZXjc
oltEAP9r8cWa3Tdv8DzMNWu/jezTUXoW/mX5Qe+c1L6faqj0WQD/dIVtBtG37Tfq
3Ci9F/GEWjKijtCQ5lwMGUq27jQJ1gk=
=/0iA
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12-rc6.iomap' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iomap fixes from Christian Brauner:
"Fixes for iomap to prevent data corruption bugs in the fallocate
unshare range implementation of fsdax and a small cleanup to turn
iomap_want_unshare_iter() into an inline function"
* tag 'vfs-6.12-rc6.iomap' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iomap: turn iomap_want_unshare_iter into an inline function
fsdax: dax_unshare_iter needs to copy entire blocks
fsdax: remove zeroing code from dax_unshare_iter
iomap: share iomap_unshare_iter predicate code with fsdax
xfs: don't allocate COW extents when unsharing a hole
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZyTGAQAKCRCRxhvAZXjc
opd6AQCal4omyfS8FYe4VRRZ/0XHouagq99I0U0TAmKkvoKAsgD/XrdE+pSTEkPX
Pv4T9phh1cZRxcyKVu77UoYkuHJEDAg=
=Lu9R
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull filesystem fixes from Christian Brauner:
"VFS:
- Fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP=y is set
- Add a get_tree_bdev_flags() helper that allows to modify e.g.,
whether errors are logged into the filesystem context during
superblock creation. This is used by erofs to fix a userspace
regression where an error is currently logged when its used on a
regular file which is an new allowed mode in erofs.
netfs:
- Fix the sysfs debug path in the documentation.
- Fix iov_iter_get_pages*() for folio queues by skipping the page
extracation if we're at the end of a folio.
afs:
- Fix moving subdirectories to different parent directory.
autofs:
- Fix handling of AUTOFS_DEV_IOCTL_TIMEOUT_CMD ioctl in
validate_dev_ioctl(). The actual ioctl number, not the ioctl
command needs to be checked for autofs"
* tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
autofs: fix thinko in validate_dev_ioctl()
iov_iter: Fix iov_iter_get_pages*() for folio_queue
afs: Fix missing subdir edit when renamed between parent dirs
doc: correcting the debug path for cachefiles
erofs: use get_tree_bdev_flags() to avoid misleading messages
fs/super.c: introduce get_tree_bdev_flags()
-----BEGIN PGP SIGNATURE-----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=alpB
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stability fixes. There's one patch adding export of MIPS
cmpxchg helper, used in the error propagation fix.
- fix error propagation from split bios to the original btrfs bio
- fix merging of adjacent extents (normal operation, defragmentation)
- fix potential use after free after freeing btrfs device structures"
* tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix defrag not merging contiguous extents due to merged extent maps
btrfs: fix extent map merging not happening for adjacent extents
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
btrfs: fix error propagation of split bios
MIPS: export __cmpxchg_small()
Various syzbot fixes, and the more notable ones:
- Fix for pointers in an extent overflowing the max (16) on a filesystem
with many devices: we were creating too many cached copies when moving
data around. Now, we only create at most one cached copy if there's a
promote target set.
Caching will be a bit broken for reflinked data until 6.13: I have
larger series queued up which significantly improves the plumbing for
data options down into the extent (bch_extent_rebalance) to fix this.
- Fix for deadlock on -ENOSPC on tiny filesystems
Allocation from the partial open_bucket list wasn't correctly
accounting partial open_buckets as free: this fixes the main cause of
tests timing out in the automated tests.
-----BEGIN PGP SIGNATURE-----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=hzm/
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-10-31' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Various syzbot fixes, and the more notable ones:
- Fix for pointers in an extent overflowing the max (16) on a
filesystem with many devices: we were creating too many cached
copies when moving data around. Now, we only create at most one
cached copy if there's a promote target set.
Caching will be a bit broken for reflinked data until 6.13: I have
larger series queued up which significantly improves the plumbing
for data options down into the extent (bch_extent_rebalance) to fix
this.
- Fix for deadlock on -ENOSPC on tiny filesystems
Allocation from the partial open_bucket list wasn't correctly
accounting partial open_buckets as free: this fixes the main cause
of tests timing out in the automated tests"
* tag 'bcachefs-2024-10-31' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix NULL ptr dereference in btree_node_iter_and_journal_peek
bcachefs: fix possible null-ptr-deref in __bch2_ec_stripe_head_get()
bcachefs: Fix deadlock on -ENOSPC w.r.t. partial open buckets
bcachefs: Don't filter partial list buckets in open_buckets_to_text()
bcachefs: Don't keep tons of cached pointers around
bcachefs: init freespace inited bits to 0 in bch2_fs_initialize
bcachefs: Fix unhandled transaction restart in fallocate
bcachefs: Fix UAF in bch2_reconstruct_alloc()
bcachefs: fix null-ptr-deref in have_stripes()
bcachefs: fix shift oob in alloc_lru_idx_fragmentation
bcachefs: Fix invalid shift in validate_sb_layout()
generic_permission() turned out to be costlier than expected. The reason
is that acl_permission_check() performs owner checks that involve costly
pointer dereferences.
There's already code that skips expensive group checks if the group and
other permission bits are the same wrt to the mask that is checked. This
logic can be extended to also shortcut permission checking in
acl_permission_check().
If the inode doesn't have POSIX ACLs than ownership doesn't matter. If
there are no missing UGO permissions the permission check can be
shortcut.
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/CAHk-=wgXEoAOFRkDg+grxs+p1U+QjWXLixRGmYEfd=vG+OBuFw@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
converted tracefs to use the new mount APIs caused mount options
(e.g. gid=<gid>) to not take effect.
The tracefs superblock can be updated from multiple paths:
- on fs_initcall() to init_trace_printk_function_export()
- from a work queue to initialize eventfs
tracer_init_tracefs_work_func()
- fsconfig() syscall to mount or remount of tracefs
The tracefs superblock root inode gets created early on in
init_trace_printk_function_export().
With the new mount API, tracefs effectively uses get_tree_single() instead
of the old API mount_single().
Previously, mount_single() ensured that the options are always applied to
the superblock root inode:
(1) If the root inode didn't exist, call fill_super() to create it
and apply the options.
(2) If the root inode exists, call reconfigure_single() which
effectively calls tracefs_apply_options() to parse and apply
options to the subperblock's fs_info and inode and remount
eventfs (if necessary)
On the other hand, get_tree_single() effectively calls vfs_get_super()
which:
(3) If the root inode doesn't exists, calls fill_super() to create it
and apply the options.
(4) If the root inode already exists, updates the fs_context root
with the superblock's root inode.
(4) above is always the case for tracefs mounts, since the super block's
root inode will already be created by init_trace_printk_function_export().
This means that the mount options get ignored:
- Since it isn't applied to the superblock's root inode, it doesn't
get inherited by the children.
- Since eventfs is initialized from a separate work queue and
before call to mount with the options, and it doesn't get remounted
for mount.
Ensure that the mount options are applied to the super block and eventfs
is remounted to respect the mount options.
To understand this better, if fstab has the following:
tracefs /sys/kernel/tracing tracefs nosuid,nodev,noexec,gid=tracing 0 0
On boot up, permissions look like:
# ls -l /sys/kernel/tracing/trace
-rw-r----- 1 root root 0 Nov 1 08:37 /sys/kernel/tracing/trace
When it should look like:
# ls -l /sys/kernel/tracing/trace
-rw-r----- 1 root tracing 0 Nov 1 08:37 /sys/kernel/tracing/trace
Link: https://lore.kernel.org/r/536e99d3-345c-448b-adee-a21389d7ab4b@redhat.com/
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ali Zahraee <ahzahraee@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 78ff640819 ("vfs: Convert tracefs to use the new mount API")
Link: https://lore.kernel.org/20241030171928.4168869-2-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When running defrag (manual defrag) against a file that has extents that
are contiguous and we already have the respective extent maps loaded and
merged, we end up not defragging the range covered by those contiguous
extents. This happens when we have an extent map that was the result of
merging multiple extent maps for contiguous extents and the length of the
merged extent map is greater than or equals to the defrag threshold
length.
The script below reproduces this scenario:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a 256K file with 4 extents of 64K each.
xfs_io -f -c "falloc 0 64K" \
-c "pwrite 0 64K" \
-c "falloc 64K 64K" \
-c "pwrite 64K 64K" \
-c "falloc 128K 64K" \
-c "pwrite 128K 64K" \
-c "falloc 192K 64K" \
-c "pwrite 192K 64K" \
$MNT/foo
umount $MNT
echo -n "Initial number of file extent items: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 128K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 128K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 256K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 256K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
Running it:
$ ./test.sh
Initial number of file extent items: 4
Number of file extent items after defrag with 128K threshold: 4
Number of file extent items after defrag with 256K threshold: 4
The 4 extents don't get merged because we have an extent map with a size
of 256K that is the result of merging the individual extent maps for each
of the four 64K extents and at defrag_lookup_extent() we have a value of
zero for the generation threshold ('newer_than' argument) since this is a
manual defrag. As a consequence we don't call defrag_get_extent() to get
an extent map representing a single file extent item in the inode's
subvolume tree, so we end up using the merged extent map at
defrag_collect_targets() and decide not to defrag.
Fix this by updating defrag_lookup_extent() to always discard extent maps
that were merged and call defrag_get_extent() regardless of the minimum
generation threshold ('newer_than' argument).
A test case for fstests will be sent along soon.
CC: stable@vger.kernel.org # 6.1+
Fixes: 199257a78b ("btrfs: defrag: don't use merged extent map for their generation check")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -d -c "pwrite -b 64K 0 64K" \
-c "pwrite -b 64K 64K 64K" \
-c "pwrite -b 64K 128K 64K" \
-c "pwrite -b 64K 192K 64K" \
/mnt/sdc/foo
After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:
1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;
2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.
The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;
3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.
We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.
At this moment we have 3 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;
4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.
So we end up with 2 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.
Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.
Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).
Fixes: 199257a78b ("btrfs: defrag: don't use merged extent map for their generation check")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints.
Link: https://lkml.kernel.org/r/20241020050003.4308-1-konishi.ryusuke@gmail.com
Fixes: 21fc61c73c ("don't put symlink bodies in pagecache into highmem")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9ef37ac20608f4836256
Tested-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reports a slab out of bounds access in squashfs_readpage_block().
This is caused by an attempt to read page index 0x2000000000. This value
(start_index) is stored in an integer loop variable which overflows
producing a value of 0. This causes a loop which iterates over pages
start_index -> end_index to iterate over 0 -> end_index, which ultimately
causes an out of bounds page array access.
Fix by changing variable to a loff_t, and rename to index to make it
clearer it is a page index, and not a loop count.
Link: https://lkml.kernel.org/r/20241020232200.837231-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZwzcnCAosIPqQ9Ie@ly-workstation/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we remount filesystem with 'abort' mount option while changing
other mount options as well (as is LTP test doing), we can return error
from the system call after commit d3476f3dad ("ext4: don't set
SB_RDONLY after filesystem errors") because the application of mount
option changes detects shutdown filesystem and refuses to do anything.
The behavior of application of other mount options in presence of
'abort' mount option is currently rather arbitary as some mount option
changes are handled before 'abort' and some after it.
Move aborting of the filesystem to the end of remount handling so all
requested changes are properly applied before the filesystem is shutdown
to have a reasonably consistent behavior.
Fixes: d3476f3dad ("ext4: don't set SB_RDONLY after filesystem errors")
Reported-by: Jan Stancek <jstancek@redhat.com>
Link: https://lore.kernel.org/all/Zvp6L+oFnfASaoHl@t14s
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Jan Stancek <jstancek@redhat.com>
Link: https://patch.msgid.link/20241004221556.19222-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
An ext4_journal_stop(handle) call was immediately used after a return value
check for a ext4_orphan_add() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/cf895072-43cf-412c-bced-8268498ad13e@web.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea1 ("NFSD: Limit the number of concurrent async COPY operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Directly return the error from xfs_bmap_longest_free_extent instead
of breaking from the loop and handling it there, and use a done
label to directly jump to the exist when we found a suitable perag
structure to reduce the indentation level and pag/max_pag check
complexity in the tail of the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory.
Reported-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Fixes: f8f1ed1ab3 ("xfs: return a referenced perag from filestreams allocator")
Cc: <stable@vger.kernel.org> # v6.3
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Recently, we found that the CPU spent a lot of time in
xfs_alloc_ag_vextent_size when the filesystem has millions of fragmented
spaces.
The reason is that we conducted much extra searching for extents that
could not yield a better result, and these searches would cost a lot of
time when there were millions of extents to search through. Even if we
get the same result length, we don't switch our choice to the new one,
so we can definitely terminate the search early.
Since the result length cannot exceed the found length, when the found
length equals the best result length we already have, we can conclude
the search.
We did a test in that filesystem:
[root@localhost ~]# xfs_db -c freesp /dev/vdb
from to extents blocks pct
1 1 215 215 0.01
2 3 994476 1988952 99.99
Before this patch:
0) | xfs_alloc_ag_vextent_size [xfs]() {
0) * 15597.94 us | }
After this patch:
0) | xfs_alloc_ag_vextent_size [xfs]() {
0) 19.176 us | }
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Extsize should only be allowed to be set on files with no data in it.
For this, we check if the files have extents but miss to check if
delayed extents are present. This patch adds that check.
While we are at it, also refactor this check into a helper since
it's used in some other places as well like xfs_inactive() or
xfs_ioctl_setattr_xflags()
**Without the patch (SUCCEEDS)**
$ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536'
wrote 1024/1024 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec)
**With the patch (FAILS as expected)**
$ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536'
wrote 1024/1024 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec)
xfs_io: FS_IOC_FSSETXATTR testfile: Invalid argument
Fixes: e94af02a9c ("[XFS] fix old xfs_setattr mis-merge from irix; mostly harmless esp if not using xfs rt")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Port files to rely on file_ref reference to improve scaling and gain
overflow protection.
- We continue to WARN during get_file() in case a file that is already
marked dead is revived as get_file() is only valid if the caller
already holds a reference to the file. This hasn't changed just the
check changes.
- The semantics for epoll and ttm's dmabuf usage have changed. Both
epoll and ttm synchronize with __fput() to prevent the underlying file
from beeing freed.
(1) epoll
Explaining epoll is straightforward using a simple diagram.
Essentially, the mutex of the epoll instance needs to be taken in both
__fput() and around epi_fget() preventing the file from being freed
while it is polled or preventing the file from being resurrected.
CPU1 CPU2
fput(file)
-> __fput(file)
-> eventpoll_release(file)
-> eventpoll_release_file(file)
mutex_lock(&ep->mtx)
epi_item_poll()
-> epi_fget()
-> file_ref_get(file)
mutex_unlock(&ep->mtx)
mutex_lock(&ep->mtx);
__ep_remove()
mutex_unlock(&ep->mtx);
-> kmem_cache_free(file)
(2) ttm dmabuf
This explanation is a bit more involved. A regular dmabuf file stashed
the dmabuf in file->private_data and the file in dmabuf->file:
file->private_data = dmabuf;
dmabuf->file = file;
The generic release method of a dmabuf file handles file specific
things:
f_op->release::dma_buf_file_release()
while the generic dentry release method of a dmabuf handles dmabuf
freeing including driver specific things:
dentry->d_release::dma_buf_release()
During ttm dmabuf initialization in ttm_object_device_init() the ttm
driver copies the provided struct dma_buf_ops into a private location:
struct ttm_object_device {
spinlock_t object_lock;
struct dma_buf_ops ops;
void (*dmabuf_release)(struct dma_buf *dma_buf);
struct idr idr;
};
ttm_object_device_init(const struct dma_buf_ops *ops)
{
// copy original dma_buf_ops in private location
tdev->ops = *ops;
// stash the release method of the original struct dma_buf_ops
tdev->dmabuf_release = tdev->ops.release;
// override the release method in the copy of the struct dma_buf_ops
// with ttm's own dmabuf release method
tdev->ops.release = ttm_prime_dmabuf_release;
}
When a new dmabuf is created the struct dma_buf_ops with the overriden
release method set to ttm_prime_dmabuf_release is passed in exp_info.ops:
DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
exp_info.ops = &tdev->ops;
exp_info.size = prime->size;
exp_info.flags = flags;
exp_info.priv = prime;
The call to dma_buf_export() then sets
mutex_lock_interruptible(&prime->mutex);
dma_buf = dma_buf_export(&exp_info)
{
dmabuf->ops = exp_info->ops;
}
mutex_unlock(&prime->mutex);
which creates a new dmabuf file and then install a file descriptor to
it in the callers file descriptor table:
ret = dma_buf_fd(dma_buf, flags);
When that dmabuf file is closed we now get:
fput(file)
-> __fput(file)
-> f_op->release::dma_buf_file_release()
-> dput()
-> d_op->d_release::dma_buf_release()
-> dmabuf->ops->release::ttm_prime_dmabuf_release()
mutex_lock(&prime->mutex);
if (prime->dma_buf == dma_buf)
prime->dma_buf = NULL;
mutex_unlock(&prime->mutex);
Where we can see that prime->dma_buf is set to NULL. So when we have
the following diagram:
CPU1 CPU2
fput(file)
-> __fput(file)
-> f_op->release::dma_buf_file_release()
-> dput()
-> d_op->d_release::dma_buf_release()
-> dmabuf->ops->release::ttm_prime_dmabuf_release()
ttm_prime_handle_to_fd()
mutex_lock_interruptible(&prime->mutex)
dma_buf = prime->dma_buf
dma_buf && get_dma_buf_unless_doomed(dma_buf)
-> file_ref_get(dma_buf->file)
mutex_unlock(&prime->mutex);
mutex_lock(&prime->mutex);
if (prime->dma_buf == dma_buf)
prime->dma_buf = NULL;
mutex_unlock(&prime->mutex);
-> kmem_cache_free(file)
The logic of the mechanism is the same as for epoll: sync with
__fput() preventing the file from being freed. Here the
synchronization happens through the ttm instance's prime->mutex.
Basically, the lifetime of the dma_buf and the file are tighly
coupled.
Both (1) and (2) used to call atomic_inc_not_zero() to check whether
the file has already been marked dead and then refuse to revive it.
This is only safe because both (1) and (2) sync with __fput() and thus
prevent kmem_cache_free() on the file being called and thus prevent
the file from being immediately recycled due to SLAB_TYPESAFE_BY_RCU.
Both (1) and (2) have been ported from atomic_inc_not_zero() to
file_ref_get(). That means a file that is already in the process of
being marked as FILE_REF_DEAD:
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
can be revived again:
CPU1 CPU2
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
file_ref_get()
// Brings reference back to FILE_REF_ONEREF
atomic_long_add_negative()
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
This is fine and inherent to the file_ref_get()/file_ref_put()
semantics. For both (1) and (2) this is safe because __fput() is
prevented from making progress if file_ref_get() fails due to the
aforementioned synchronization mechanisms.
Two cases need to be considered that affect both (1) epoll and (2) ttm
dmabuf:
(i) fput()'s file_ref_put() and marks the file as FILE_REF_NOREF but
before that fput() can mark the file as FILE_REF_DEAD someone
manages to sneak in a file_ref_get() and brings the refcount back
from FILE_REF_NOREF to FILE_REF_ONEREF. In that case the original
fput() doesn't call __fput(). For epoll the poll will finish and
for ttm dmabuf the file can be used again. For ttm dambuf this is
actually an advantage because it avoids immediately allocating
a new dmabuf object.
CPU1 CPU2
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
file_ref_get()
// Brings reference back to FILE_REF_ONEREF
atomic_long_add_negative()
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
(ii) fput()'s file_ref_put() marks the file FILE_REF_NOREF and
also suceeds in actually marking it FILE_REF_DEAD and then calls
into __fput() to free the file.
When either (1) or (2) call file_ref_get() they fail as
atomic_long_add_negative() will return true.
At the same time, both (1) and (2) all file_ref_get() under
mutexes that __fput() must also acquire preventing
kmem_cache_free() from freeing the file.
So while this might be treated as a change in semantics for (1) and
(2) it really isn't. It if should end up causing issues this can be
fixed by adding a helper that does something like:
long cnt = atomic_long_read(&ref->refcnt);
do {
if (cnt < 0)
return false;
} while (!atomic_long_try_cmpxchg(&ref->refcnt, &cnt, cnt + 1));
return true;
which would block FILE_REF_NOREF to FILE_REF_ONEREF transitions.
- Jann correctly pointed out that kmem_cache_zalloc() cannot be used
anymore once files have been ported to file_ref_t.
The kmem_cache_zalloc() call will memset() the whole struct file to
zero when it is reallocated. This will also set file->f_ref to zero
which mens that a concurrent file_ref_get() can return true:
CPU1 CPU2
__get_file_rcu()
rcu_dereference_raw()
close()
[frees file]
alloc_empty_file()
kmem_cache_zalloc()
[reallocates same file]
memset(..., 0, ...)
file_ref_get()
[increments 0->1, returns true]
init_file()
file_ref_init(..., 1)
[sets to 0]
rcu_dereference_raw()
fput()
file_ref_put()
[decrements 0->FILE_REF_NOREF, frees file]
[UAF]
causing a concurrent __get_file_rcu() call to acquire a reference to
the file that is about to be reallocated and immediately freeing it
on realizing that it has been recycled. This causes a UAF for the
task that reallocated/recycled the file.
This is prevented by switching from kmem_cache_zalloc() to
kmem_cache_alloc() and initializing the fields manually. With
file->f_ref initialized last.
Note that a memset() also isn't guaranteed to atomically update an
unsigned long so it's theoretically possible to see torn and
therefore bogus counter values.
Link: https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-3-387e24dc9163@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
/ btrfs_device_1 → loop0
fs_device
\ btrfs_device_2 → loop1
2. mount /dev/loop0 /mnt
btrfs_open_devices
btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0)
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
fail: btrfs_close_devices // -ENOMEM
btrfs_close_bdev(btrfs_device_1)
fput(btrfs_device_1->bdev_file)
// btrfs_device_1->bdev_file is freed
btrfs_close_bdev(btrfs_device_2)
fput(btrfs_device_2->bdev_file)
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing the
btrfs_device in btrfs_close_one_device().
Fixes: 1423881941 ("btrfs: do not background blkdev_put()")
CC: stable@vger.kernel.org # 4.19+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219408
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Ensure the refcount and async_copies fields are initialized early.
cleanup_async_copy() will reference these fields if an error occurs
in nfsd4_copy(). If they are not correctly initialized, at the very
least, a refcount underflow occurs.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea1 ("NFSD: Limit the number of concurrent async COPY operations")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add NULL check for key returned from bch2_btree_and_journal_iter_peek in
btree_node_iter_and_journal_peek to avoid NULL ptr dereference in
bch2_bkey_buf_reassemble.
When key returned from bch2_btree_and_journal_iter_peek is NULL it means
that btree topology needs repair. Print topology error message with
position at which node wasn't found, its parent node information and
btree_id with level.
Return error code returned by bch2_topology_error to ensure that topology
error is handled properly by recovery.
Reported-by: syzbot+005ef9aa519f30d97657@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=005ef9aa519f30d97657
Fixes: 5222a4607c ("bcachefs: BTREE_ITER_WITH_JOURNAL")
Suggested-by: Alan Huang <mmpgouride@gmail.com>
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The function ec_new_stripe_head_alloc() returns nullptr if kzalloc()
fails. It is crucial to verify its return value before dereferencing
it to avoid a potential nullptr dereference.
Fixes: 035d72f72c ("bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Open buckets on the partial list should not count as allocated when
we're trying to allocate from the partial list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug report where the data update path was creating an extent
that failed to validate because it had too many pointers; almost all of
them were cached.
To fix this, we have:
- want_cached_ptr(), a new helper that checks if we even want a cached
pointer (is on appropriate target, device is readable).
- bch2_extent_set_ptr_cached() now only sets a pointer cached if we want
it.
- bch2_extent_normalize_by_opts() now ensures that we only have a single
cached pointer that we want.
While working on this, it was noticed that this doesn't work well with
reflinked data and per-file options. Another patch series is coming that
plumbs through additional io path options through bch_extent_rebalance,
with improved option handling.
Reported-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initialize freespace_initialized bits to 0 in member's flags and update
member's cached version for each device in bch2_fs_initialize.
It's possible for the bits to be set to 1 before fs is initialized and if
call to bch2_trans_mark_dev_sbs (just before bch2_fs_freespace_init) fails
bits remain to be 1 which can later indirectly trigger BUG condition in
bch2_bucket_alloc_freelist during shutdown.
Reported-by: syzbot+2b6a17991a6af64f9489@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2b6a17991a6af64f9489
Fixes: bbe682c767 ("bcachefs: Ensure devices are always correctly initialized")
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Syzbot reported that in directory operations after nilfs2 detects
filesystem corruption and degrades to read-only,
__block_write_begin_int(), which is called to prepare block writes, may
fail the BUG_ON check for accesses exceeding the folio/page size,
triggering a kernel bug.
This was found to be because the "checked" flag of a page/folio was not
cleared when it was discarded by nilfs2's own routine, which causes the
sanity check of directory entries to be skipped when the directory
page/folio is reloaded. So, fix that.
This was necessary when the use of nilfs2's own page discard routine was
applied to more than just metadata files.
Link: https://lkml.kernel.org/r/20241017193359.5051-1-konishi.ryusuke@gmail.com
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d6ca2daf692c7a82f959@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d6ca2daf692c7a82f959
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two
reasons for this: first, the parameter value passed is greater than
ocfs2_max_inline_data_with_xattr, second, the start and end parameters of
ocfs2_truncate_inline are "unsigned int".
So, we need to add a sanity check for byte_start and byte_len right before
ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater
than ocfs2_max_inline_data_with_xattr return -EINVAL.
Link: https://lkml.kernel.org/r/tencent_D48DB5122ADDAEDDD11918CFB68D93258C07@qq.com
Fixes: 1afc32b952 ("ocfs2: Write support for inline data")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+81092778aac03460d6b7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=81092778aac03460d6b7
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "fork: do not expose incomplete mm on fork".
During fork we may place the virtual memory address space into an
inconsistent state before the fork operation is complete.
In addition, we may encounter an error during the fork operation that
indicates that the virtual memory address space is invalidated.
As a result, we should not be exposing it in any way to external machinery
that might interact with the mm or VMAs, machinery that is not designed to
deal with incomplete state.
We specifically update the fork logic to defer khugepaged and ksm to the
end of the operation and only to be invoked if no error arose, and
disallow uffd from observing fork events should an error have occurred.
This patch (of 2):
Currently on fork we expose the virtual address space of a process to
userland unconditionally if uffd is registered in VMAs, regardless of
whether an error arose in the fork.
This is performed in dup_userfaultfd_complete() which is invoked
unconditionally, and performs two duties - invoking registered handlers
for the UFFD_EVENT_FORK event via dup_fctx(), and clearing down
userfaultfd_fork_ctx objects established in dup_userfaultfd().
This is problematic, because the virtual address space may not yet be
correctly initialised if an error arose.
The change in commit d240629148 ("fork: use __mt_dup() to duplicate
maple tree in dup_mmap()") makes this more pertinent as we may be in a
state where entries in the maple tree are not yet consistent.
We address this by, on fork error, ensuring that we roll back state that
we would otherwise expect to clean up through the event being handled by
userland and perform the memory freeing duty otherwise performed by
dup_userfaultfd_complete().
We do this by implementing a new function, dup_userfaultfd_fail(), which
performs the same loop, only decrementing reference counts.
Note that we perform mmgrab() on the parent and child mm's, however
userfaultfd_ctx_put() will mmdrop() this once the reference count drops to
zero, so we will avoid memory leaks correctly here.
Link: https://lkml.kernel.org/r/cover.1729014377.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d3691d58bb58712b6fb3df2be441d175bd3cdf07.1729014377.git.lorenzo.stoakes@oracle.com
Fixes: d240629148 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable casefold lookup in tmpfs, based on the encoding defined by
userspace. That means that instead of comparing byte per byte a file
name, it compares to a case-insensitive equivalent of the Unicode
string.
* Dcache handling
There's a special need when dealing with case-insensitive dentries.
First of all, we currently invalidated every negative casefold dentries.
That happens because currently VFS code has no proper support to deal
with that, giving that it could incorrectly reuse a previous filename
for a new file that has a casefold match. For instance, this could
happen:
$ mkdir DIR
$ rm -r DIR
$ mkdir dir
$ ls
DIR/
And would be perceived as inconsistency from userspace point of view,
because even that we match files in a case-insensitive manner, we still
honor whatever is the initial filename.
Along with that, tmpfs stores only the first equivalent name dentry used
in the dcache, preventing duplications of dentries in the dcache. The
d_compare() version for casefold files uses a normalized string, so the
filename under lookup will be compared to another normalized string for
the existing file, achieving a casefolded lookup.
* Enabling casefold via mount options
Most filesystems have their data stored in disk, so casefold option need
to be enabled when building a filesystem on a device (via mkfs).
However, as tmpfs is a RAM backed filesystem, there's no disk
information and thus no mkfs to store information about casefold.
For tmpfs, create casefold options for mounting. Userspace can then
enable casefold support for a mount point using:
$ mount -t tmpfs -o casefold=utf8-12.1.0 fs_name mount_dir/
Userspace must set what Unicode standard is aiming to. The available
options depends on what the kernel Unicode subsystem supports.
And for strict encoding:
$ mount -t tmpfs -o casefold=utf8-12.1.0,strict_encoding fs_name mount_dir/
Strict encoding means that tmpfs will refuse to create invalid UTF-8
sequences. When this option is not enabled, any invalid sequence will be
treated as an opaque byte sequence, ignoring the encoding thus not being
able to be looked up in a case-insensitive way.
* Check for casefold dirs on simple_lookup()
On simple_lookup(), do not create dentries for casefold directories.
Currently, VFS does not support case-insensitive negative dentries and
can create inconsistencies in the filesystem. Prevent such dentries to
being created in the first place.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-6-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Export generic_ci_ dentry functions so they can be used by
case-insensitive filesystems that need something more custom than the
default one set by `struct generic_ci_dentry_ops`.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-5-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
All filesystems that currently support UTF-8 casefold can fetch the
UTF-8 version from the filesystem metadata stored on disk. They can get
the data stored and directly match it to a integer, so they can skip the
string parsing step, which motivated the removal of this function in the
first place.
However, for tmpfs, the only way to tell the kernel which UTF-8 version
we are about to use is via mount options, using a string. Re-introduce
utf8_parse_version() to be used by tmpfs.
This version differs from the original by skipping the intermediate step
of copying the version string to an auxiliary string before calling
match_token(). This versions calls match_token() in the argument string.
The paramenters are simpler now as well.
utf8_parse_version() was created by 9d53690f0d ("unicode: implement
higher level API for string handling") and later removed by 49bd03cc7e
("unicode: pass a UNICODE_AGE() tripple to utf8_load").
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-4-f443d5814194@igalia.com
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Export latest available UTF-8 version number so filesystems can easily
load the newest one.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-3-f443d5814194@igalia.com
Acked-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use the helper function to check the requirements for casefold
directories using strict encoding.
Suggested-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-2-f443d5814194@igalia.com
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Most of the callers of wbc_account_cgroup_owner() are converting a folio
to page before calling the function. wbc_account_cgroup_owner() is
converting the page back to a folio to call mem_cgroup_css_from_folio().
Convert wbc_account_cgroup_owner() to take a folio instead of a page,
and convert all callers to pass a folio directly except f2fs.
Convert the page to folio for all the callers from f2fs as they were the
only callers calling wbc_account_cgroup_owner() with a page. As f2fs is
already in the process of converting to folios, these call sites might
also soon be calling wbc_account_cgroup_owner() with a folio directly in
the future.
No functional changes. Only compile tested.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240926140121.203821-1-kernel@pankajraghav.com
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I was so sure the per-dentry expire timeout patch worked ok but my
testing was flawed.
In validate_dev_ioctl() the check for ioctl AUTOFS_DEV_IOCTL_TIMEOUT_CMD
should use the ioctl number not the passed in ioctl command.
Fixes: 433f9d76a0 ("autofs: add per dentry expire timeout")
Cc: <stable@vger.kernel.org> # mainline only
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20241027224732.5507-1-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot
be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed,
so check error for xa_store() to fix it.
Cc: stable@vger.kernel.org
Fixes: b685757c7b ("ksmbd: Implements sess->rpc_handle_list as xarray")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
* fix recovery of allocator ops after a growfs
* Do not fail repairs on metadata files with no attr fork
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZxjo7gAKCRBGdaER5Qtf
pr26AYCUc9+Vlg5iReesrghYHJgeCaMYZm2i4WdNdI+BO8d+5+AA1oUO55ib3xWd
fX8A0MEBf32eeMR0E+K0NeKsmHnbGHXyWRg/27IlNRniL4/yldssEFB8X3b7Gkw5
/geUVdz99A==
=+NGs
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Fix recovery of allocator ops after a growfs
- Do not fail repairs on metadata files with no attr fork
* tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: update the pag for the last AG at recovery time
xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag
xfs: error out when a superblock buffer update reduces the agcount
xfs: update the file system geometry after recoverying superblock buffers
xfs: merge the perag freeing helpers
xfs: pass the exact range to initialize to xfs_initialize_perag
xfs: don't fail repairs on metadata files with no attr fork
-----BEGIN PGP SIGNATURE-----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=O6o1
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux
Pull more 9p reverts from Dominique Martinet:
"Revert patches causing inode collision problems.
The code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes. See the top-most revert (commit
be2ca38253) for details.
This problem had been ignored for too long and the reverts will also
head to stable (6.9+).
I'm confident this set of patches gets us back to previous behaviour
(another related patch had already been reverted back in April and
we're almost back to square 1, and the rest didn't touch inode
lifecycle)"
* tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux:
Revert "fs/9p: simplify iget to remove unnecessary paths"
Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl"
Revert "fs/9p: remove redundant pointer v9ses"
Revert " fs/9p: mitigate inode collisions"
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZxu02AAKCRDh3BK/laaZ
PLDHAPwMzz4c+wbqz8Qo2IEo3lxvgPjgzMNXQetCgZFKvxKRlwD+PaIeRixGwwmB
ON3IsScZjROphzb+ofroUpj7lLEM7Ag=
=9rYN
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
- Fix a couple of use-after-free bugs
-----BEGIN PGP SIGNATURE-----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=1YOr
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
c->btree_roots_known[i].b can be NULL. In this case, a NULL pointer dereference
occurs, so you need to add code to check the variable.
Reported-by: syzbot+b468b9fef56949c3b528@syzkaller.appspotmail.com
Fixes: 7773df19c3 ("bcachefs: metadata version bucket_stripe_sectors")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The size of a.data_type is set abnormally large, causing shift-out-of-bounds.
To fix this, we need to add validation on a.data_type in
alloc_lru_idx_fragmentation().
Reported-by: syzbot+7f45fa9805c40db3f108@syzkaller.appspotmail.com
Fixes: 260af1562e ("bcachefs: Kill alloc_v4.fragmentation_lru")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This reverts commit 724a08450f.
This code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes, as can be illustrated with simple
tmpfs exports in qemu with remapping disabled:
```
# host side
cd /tmp/linux-test
mkdir m1 m2
mount -t tmpfs tmpfs m1
mount -t tmpfs tmpfs m2
mkdir m1/dir m2/dir
echo foo > m1/dir/foo
echo bar > m2/dir/bar
# guest side
# started with -virtfs local,path=/tmp/linux-test,mount_tag=tmp,security_model=mapped-file
mount -t 9p -o trans=virtio,debug=1 tmp /mnt/t
ls /mnt/t/m1/dir
# foo
ls /mnt/t/m2/dir
# bar (works ok if directry isn't open)
# cd to keep first dir's inode alive
cd /mnt/t/m1/dir
ls /mnt/t/m2/dir
# foo (should be bar)
```
Other examples can be crafted with regular files with fscache enabled,
in which case I/Os just happen to the wrong file leading to
corruptions, or guest failing to boot with:
| VFS: Lookup of 'com.android.runtime' in 9p 9p would have caused loop
In theory, we'd want the servers to be smart enough and ensure they
never send us two different files with the same 'qid.path', but while
qemu has an option to remap that is recommended (and qemu prints a
warning if this case happens), there are many other servers which do
not (kvmtool, nfs-ganesha, probably diod...), we should at least ensure
we don't cause regressions on this:
- assume servers can't be trusted and operations that should get a 'new'
inode properly do so. commit d05dcfdf5e (" fs/9p: mitigate inode
collisions") attempted to do this, but v9fs_fid_iget_dotl() was not
called so some higher level of caching got in the way; this needs to be
fixed properly before we can re-apply the patches.
- if we ever want to really simplify this code, we will need to add some
negotiation with the server at mount time where the server could claim
they handle this properly, at which point we could optimize this out.
(but that might not be needed at all if we properly handle the 'new'
check?)
Fixes: 724a08450f ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20240408141436.GA17022@redhat.com/
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-4-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This reverts commit 11763a8598.
This is a requirement to revert commit 724a08450f ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-3-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This reverts commit 10211b4a23.
This is a requirement to revert commit 724a08450f ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-2-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This reverts commit d05dcfdf5e.
This is a requirement to revert commit 724a08450f ("fs/9p: simplify
iget to remove unnecessary paths"), see that revert for details.
Fixes: 724a08450f ("fs/9p: simplify iget to remove unnecessary paths")
Reported-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20240923100508.GA32066@willie-the-truck
Cc: stable@vger.kernel.org # v6.9+
Message-ID: <20241024-revert_iget-v1-1-4cac63d25f72@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
-----BEGIN PGP SIGNATURE-----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=sYxX
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found by
xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but not
the type, and a user contributed a filesystem where the hash type on
one inode had somehow been flipped; these fixes allow his filesystem
to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash check
code now checks for duplicate non dangling dirents, and renames one of
them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations, causing
an -ENOMEM when allocating the sorted array of journal keys: this
allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount.
-----BEGIN PGP SIGNATURE-----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=OpYN
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found
by xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but
not the type, and a user contributed a filesystem where the hash
type on one inode had somehow been flipped; these fixes allow his
filesystem to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash
check code now checks for duplicate non dangling dirents, and
renames one of them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations,
causing an -ENOMEM when allocating the sorted array of journal
keys: this allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount"
* tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs: (26 commits)
bcachefs: Set bch_inode_unpacked.bi_snapshot in old inode path
bcachefs: Mark more errors as AUTOFIX
bcachefs: Workaround for kvmalloc() not supporting > INT_MAX allocations
bcachefs: Don't use wait_event_interruptible() in recovery
bcachefs: Fix __bch2_fsck_err() warning
bcachefs: fsck: Improve hash_check_key()
bcachefs: bch2_hash_set_or_get_in_snapshot()
bcachefs: Repair mismatches in inode hash seed, type
bcachefs: Add hash seed, type to inode_to_text()
bcachefs: INODE_STR_HASH() for bch_inode_unpacked
bcachefs: Run in-kernel offline fsck without ratelimit errors
bcachefs: skip mount option handle for empty string.
bcachefs: fix incorrect show_options results
bcachefs: Fix data corruption on -ENOSPC in buffered write path
bcachefs: bch2_folio_reservation_get_partial() is now better behaved
bcachefs: fix disk reservation accounting in bch2_folio_reservation_get()
bcachefS: ec: fix data type on stripe deletion
bcachefs: Don't use commit_do() unnecessarily
bcachefs: handle restarts in bch2_bucket_io_time_reset()
bcachefs: fix restart handling in __bch2_resume_logged_op_finsert()
...
This reverts commit 1325e4a91a.
using multipage folios apparently break some madvise operations like
MADV_PAGEOUT which do not reliably unload the specified page anymore,
Revert the patch until that is figured out.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: 1325e4a91a ("9p: Enable multipage folios")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A common pattern when using pid fds is having to get information
about the process, which currently requires /proc being mounted,
resolving the fd to a pid, and then do manual string parsing of
/proc/N/status and friends. This needs to be reimplemented over
and over in all userspace projects (e.g.: I have reimplemented
resolving in systemd, dbus, dbus-daemon, polkit so far), and
requires additional care in checking that the fd is still valid
after having parsed the data, to avoid races.
Having a programmatic API that can be used directly removes all
these requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct
so that more parameters can be added later if needed. Start with
returning pid/tgid/ppid and creds unconditionally, and cgroupid
optionally.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Link: https://lore.kernel.org/r/20241010155401.2268522-1-luca.boccassi@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The purpose of btrfs_bbio_propagate_error() shall be propagating an error
of split bio to its original btrfs_bio, and tell the error to the upper
layer. However, it's not working well on some cases.
* Case 1. Immediate (or quick) end_bio with an error
When btrfs sends btrfs_bio to mirrored devices, btrfs calls
btrfs_bio_end_io() when all the mirroring bios are completed. If that
btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function
is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error()
accesses the orig_bbio's bio context to increase the error count.
That works well in most cases. However, if the end_io is called enough
fast, orig_bbio's (remaining part after split) bio context may not be
properly set at that time. Since the bio context is set when the orig_bbio
(the last btrfs_bio) is sent to devices, that might be too late for earlier
split btrfs_bio's completion. That will result in NULL pointer
dereference.
That bug is easily reproducible by running btrfs/146 on zoned devices [1]
and it shows the following trace.
[1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-5)
RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs]
BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
RSP: 0018:ffffc9000006f248 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080
RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58
R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158
FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body.cold+0x19/0x26
? page_fault_oops+0x13e/0x2b0
? _printk+0x58/0x73
? do_user_addr_fault+0x5f/0x750
? exc_page_fault+0x76/0x240
? asm_exc_page_fault+0x22/0x30
? btrfs_bio_end_io+0xae/0xc0 [btrfs]
? btrfs_log_dev_io_error+0x7f/0x90 [btrfs]
btrfs_orig_write_end_io+0x51/0x90 [btrfs]
dm_submit_bio+0x5c2/0xa50 [dm_mod]
? find_held_lock+0x2b/0x80
? blk_try_enter_queue+0x90/0x1e0
__submit_bio+0xe0/0x130
? ktime_get+0x10a/0x160
? lockdep_hardirqs_on+0x74/0x100
submit_bio_noacct_nocheck+0x199/0x410
btrfs_submit_bio+0x7d/0x150 [btrfs]
btrfs_submit_chunk+0x1a1/0x6d0 [btrfs]
? lockdep_hardirqs_on+0x74/0x100
? __folio_start_writeback+0x10/0x2c0
btrfs_submit_bbio+0x1c/0x40 [btrfs]
submit_one_bio+0x44/0x60 [btrfs]
submit_extent_folio+0x13f/0x330 [btrfs]
? btrfs_set_range_writeback+0xa3/0xd0 [btrfs]
extent_writepage_io+0x18b/0x360 [btrfs]
extent_write_locked_range+0x17c/0x340 [btrfs]
? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
run_delalloc_cow+0x71/0xd0 [btrfs]
btrfs_run_delalloc_range+0x176/0x500 [btrfs]
? find_lock_delalloc_range+0x119/0x260 [btrfs]
writepage_delalloc+0x2ab/0x480 [btrfs]
extent_write_cache_pages+0x236/0x7d0 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xd4/0x240
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode+0x12c/0x290
? wbc_attach_and_unlock_inode+0x12c/0x290
__writeback_single_inode+0x5c/0x4c0
? do_raw_spin_unlock+0x49/0xb0
writeback_sb_inodes+0x22c/0x560
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x1d6/0x3f0
wb_workfn+0x334/0x520
process_one_work+0x1ee/0x570
? lock_is_held_type+0xc6/0x130
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xee/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: dm_mod btrfs blake2b_generic xor raid6_pq rapl
CR2: 0000000000000020
* Case 2. Earlier completion of orig_bbio for mirrored btrfs_bios
btrfs_bbio_propagate_error() assumes the end_io function for orig_bbio is
called last among split bios. In that case, btrfs_orig_write_end_io() sets
the bio->bi_status to BLK_STS_IOERR by seeing the bioc->error [2].
Otherwise, the increased orig_bio's bioc->error is not checked by anyone
and return BLK_STS_OK to the upper layer.
[2] Actually, this is not true. Because we only increases orig_bioc->errors
by max_errors, the condition "atomic_read(&bioc->error) > bioc->max_errors"
is still not met if only one split btrfs_bio fails.
* Case 3. Later completion of orig_bbio for un-mirrored btrfs_bios
In contrast to the above case, btrfs_bbio_propagate_error() is not working
well if un-mirrored orig_bbio is completed last. It sets
orig_bbio->bio.bi_status to the btrfs_bio's error. But, that is easily
over-written by orig_bbio's completion status. If the status is BLK_STS_OK,
the upper layer would not know the failure.
* Solution
Considering the above cases, we can only save the error status in the
orig_bbio (remaining part after split) itself as it is always
available. Also, the saved error status should be propagated when all the
split btrfs_bios are finished (i.e, bbio->pending_ios == 0).
This commit introduces "status" to btrfs_bbio and saves the first error of
split bios to original btrfs_bio's "status" variable. When all the split
bios are finished, the saved status is loaded into original btrfs_bio's
status.
With this commit, btrfs/146 on zoned devices does not hit the NULL pointer
dereference anymore.
Fixes: 852eee62d3 ("btrfs: allow btrfs_submit_bio to split bios")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'.
Fixes: edea94a697 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb3_reconfigure(), after duplicating ctx->password and
ctx->password2 with kstrdup(), we need to check for allocation
failures.
If ses->password allocation fails, return -ENOMEM.
If ses->password2 allocation fails, free ses->password, set it
to NULL, and return -ENOMEM.
Fixes: c1eb537bf4 ("cifs: allow changing password during remount")
Reviewed-by: David Howells <dhowells@redhat.com
Signed-off-by: Haoxiang Li <make24@iscas.ac.cn>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MAXAG is a legitimate value for bmp->db_numag
Fixes: e63866a475 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fcc ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration.
Reported-by: syzbot+56360f93efa90ff15870@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000008c5d090621cb2770@google.com/
Fixes: f044b31867 ("btrfs: handle the ro->rw transition for mounting different subvolumes")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
investigation revealed that the exact symptom was a correct page
followed by an incorrect, duplicate, page. This got us thinking about
extent maps.
commit ac05ca913e ("Btrfs: fix race between using extent maps and merging them")
enforces a reference count on the primary `em` extent_map being merged,
as that one gets modified.
However, since,
commit 3d2ac99224 ("btrfs: introduce new members for extent_map")
both 'em' and 'merge' get modified, which started modifying 'merge'
and thus introduced the same race.
We were able to reproduce this by looping the affected squashfs workload
in parallel on a bunch of separate btrfs-es while also dropping caches.
We are still working on a simple enough reproducer to make into an fstest.
The simplest fix is to stop modifying 'merge', which is not essential,
as it is dropped immediately after the merge. This behavior is simply
a consequence of the order of the two extent maps being important in
computing the new values. Modify merge_ondisk_extents to take prev and
next by const* and also take a third merged parameter that it puts the
results in. Note that this introduces the rather odd behavior of passing
'em' to merge_ondisk_extents as a const * and as a regular ptr.
Fixes: 3d2ac99224 ("btrfs: introduce new members for extent_map")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside lock_delalloc_folios(), there are several problems related to
sector size < page size handling:
- Set the writer locks without checking if the folio is still valid
We call btrfs_folio_start_writer_lock() just like it's folio_lock().
But since the folio may not even be the folio of the current mapping,
we can easily screw up the folio->private.
- The range is not clamped inside the page
This means we can over write other bitmaps if the start/len is not
properly handled, and trigger the btrfs_subpage_assert().
- @processed_end is always rounded up to page end
If the delalloc range is not page aligned, and we need to retry
(returning -EAGAIN), then we will unlock to the page end.
Thankfully this is not a huge problem, as now
btrfs_folio_end_writer_lock() can handle range larger than the locked
range, and only unlock what is already locked.
Fix all these problems by:
- Lock and check the folio first, then call
btrfs_folio_set_writer_lock()
So that if we got a folio not belonging to the inode, we won't
touch folio->private.
- Properly truncate the range inside the page
- Update @processed_end to the locked range end
Fixes: 1e1de38792 ("btrfs: make process_one_page() to handle subpage locking")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 011b46c304 ("btrfs: skip subtree scan if it's too high to
avoid low stall in btrfs_commit_transaction()"), btrfs qgroup can
automatically skip large subtree scan at the cost of marking qgroup
inconsistent.
It's designed to address the final performance problem of snapshot drop
with qgroup enabled, but to be safe the default value is
BTRFS_MAX_LEVEL, requiring a user space daemon to set a different value
to make it work.
I'd say it's not a good idea to rely on user space tool to set this
default value, especially when some operations (snapshot dropping) can
be triggered immediately after mount, leaving a very small window to
that that sysfs interface.
So instead of disabling this new feature by default, enable it with a
low threshold (3), so that large subvolume tree drop at mount time won't
cause huge qgroup workload.
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the migration to use fs context for processing mount options we had
a slight change in the semantics for remounting a filesystem that was
mounted with compress-force. Before we could clear compress-force by
passing only "-o compress[=algo]" during a remount, but after that change
that does not work anymore, force-compress is still present and one needs
to pass "-o compress-force=no,compress[=algo]" to the mount command.
Example, when running on a kernel 6.8+:
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
On a 6.7 kernel (or older):
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
So update btrfs_parse_param() to clear "compress-force" when "compress" is
given, providing the same semantics as kernel 6.7 and older.
Reported-by: Roman Mamedov <rm@romanrm.net>
Link: https://lore.kernel.org/linux-btrfs/20241014182416.13d0f8b0@nvm/
CC: stable@vger.kernel.org # 6.8+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently log recovery never updates the in-core perag values for the
last allocation group when they were grown by growfs. This leads to
btree record validation failures for the alloc, ialloc or finotbt
trees if a transaction references this new space.
Found by Brian's new growfs recovery stress test.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
__GFP_RETRY_MAYFAIL increases the likelyhood of allocations to fail,
which isn't really helpful during log recovery. Remove the flag and
stick to the default GFP_KERNEL policies.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS currently does not support reducing the agcount, so error out if
a logged sb buffer tries to shrink the agcount.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Primary superblock buffers that change the file system geometry after a
growfs operation can affect the operation of later CIL checkpoints that
make use of the newly added space and allocation groups.
Apply the changes to the in-memory structures as part of recovery pass 2,
to ensure recovery works fine for such cases.
In the future we should apply the logic to other updates such as features
bits as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is no good reason to have two different routines for freeing perag
structures for the unmount and error cases. Add two arguments to specify
the range of AGs to free to xfs_free_perag, and use that to replace
xfs_free_unused_perag_range.
The addition RCU grace period for the error case is harmless, and the
extra check for the AG to actually exist is not required now that the
callers pass the exact known allocated range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently only the new agcount is passed to xfs_initialize_perag, which
requires lookups of existing AGs to skip them and complicates error
handling. Also pass the previous agcount so that the range that
xfs_initialize_perag operates on is exactly defined. That way the
extra lookups can be avoided, and error handling can clean up the
exact range from the old count to the last added perag structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Fix a minor bug where we fail repairs on metadata files that do not have
attr forks because xrep_metadata_inode_subtype doesn't filter ENOENT.
Cc: stable@vger.kernel.org # v6.8
Fixes: 5a8e07e799 ("xfs: repair the inode core and forks of a metadata inode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add the __counted_by compiler attribute to the flexible array member
a_entries to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Use struct_size() to calculate the number of bytes to allocate for new
and cloned acls and remove the local size variables.
Change the posix_acl_alloc() function parameter count from int to
unsigned int to match posix_acl's a_count data type. Add identifier
names to the function definition to silence two checkpatch warnings.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20241018121426.155247-2-thorsten.blum@linux.dev
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now, the epoll only use wake_up() interface to wake up task.
However, sometimes, there are epoll users which want to use
the synchronous wakeup flag to hint the scheduler, such as
Android binder driver.
So add a wake_up_sync() define, and use the wake_up_sync()
when the sync is true in ep_poll_callback().
Co-developed-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Link: https://lore.kernel.org/r/20240426080548.8203-1-xuewen.yan@unisoc.com
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Reported-by: Benoit Lize <lizeb@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The loop between elf_core_dump() and dump_user_range() can run for
so long that the system shows softlockup messages, with side effects
like workqueues and RCU getting stuck on the core dumping CPU.
Add a cond_resched() in dump_user_range() to avoid that softlockup.
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20241010113651.50cb0366@imladris.surriel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently when passing a closed file descriptor to
fcntl(fd, F_DUPFD_QUERY, fd_dup) the order matters:
fd = open("/dev/null");
fd_dup = dup(fd);
When we now close one of the file descriptors we get:
(1) fcntl(fd, fd_dup) // -EBADF
(2) fcntl(fd_dup, fd) // 0 aka not equal
depending on which file descriptor is passed first. That's not a huge
deal but it gives the api I slightly weird feel. Make it so that the
order doesn't matter by requiring that both file descriptors are valid:
(1') fcntl(fd, fd_dup) // -EBADF
(2') fcntl(fd_dup, fd) // -EBADF
Link: https://lore.kernel.org/r/20241008-duften-formel-251f967602d5@brauner
Fixes: c62b758bae ("fcntl: add F_DUPFD_QUERY fcntl()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-By: Lennart Poettering <lennart@poettering.net>
Cc: stable@vger.kernel.org
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
