Commit Graph

1032 Commits

Author SHA1 Message Date
Alex Deucher
3e5f8ff3a9 drm/radeon/kms: add quirk for Acer laptop
DVI-I port is actually DVI-D

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:44 +10:00
Alex Deucher
80297e87bc drm/radeon/kms: rework scaler handling
Keep requested scaler type in radeon_encoder
and the actual scaler type used in radeon_crtc.
This prevents us from enabling the scaler when it's
not required (i.e., the requested mode is the native
mode).  Also, always set the adjusted mode equal
to the native mode for lvds.

Should fix:
https://bugzilla.redhat.com/show_bug.cgi?id=522271

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:43 +10:00
Alex Deucher
fe6890c3e8 drm/radeon/kms: fix typo in legacy internal tmds mode fixup
Call to set active device was missing.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:42 +10:00
Dave Airlie
17e15b0c71 drm/radeon/kms: AGP systems need PCI bus mastering enabled
We might not hit this yet, but when if we do any sort of writeback
we really need to enable PCI bus mastering on these systems from
what I can see.

This enables PCI BM on all radeons that require it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:41 +10:00
Alex Deucher
fcec570b27 drm/radeon/kms: add support for external tmds on legacy boards
This enables initialization of external tmds chips on pre-atom
and mac systems.  Macs are untested.  Also, some macs have single
link tmds chips while others have dual link tmds chips.  We need
to figure out which ones have which.

This gets external TMDS working on my RS485 and RV380.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:40 +10:00
Alex Deucher
9b9fe72488 drm/radeon/kms: clean up i2c
- Change reg/mask names to match what we use internally
and in the bios
- Clarify how i2c over gpio on radeon actually works

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:39 +10:00
Alex Deucher
ab1e9ea08f drm/radeon/kms: dont't pass a radeon_connector to radeon_i2c_do_lock()
We need this for supporting things other than ddc on i2c.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:36:38 +10:00
Linus Torvalds
9709652703 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Select CONFIG_SHMEM
  drm/i915: Fix CRT hotplug detect by checking really no channels attached
  agp/intel: new host bridge support
  drm/i915: Add more registers save/restore for Ironlake suspend
  drm/i915: Fix IRQ stall issue on Ironlake
  drm/i915: HDMI hardware workaround for Ironlake
  drm/i915: Fix and cleanup DPLL calculation for Ironlake
  drm/i915: Avoid potential sleep whilst holding spinlock
2009-11-30 13:57:19 -08:00
Chris Wilson
ca9ab10033 drm/i915: Select CONFIG_SHMEM
The driver requires shmfs as the backing filesystem to handle the buffer
objects, so ensure it is selected if the user chooses to build our
driver.

Fixes: Bug 14662 - Dell E5500 kernel panic with KMS
http://bugzilla.kernel.org/show_bug.cgi?id=14662

The revealing nature of the panic is the NULL function pointer
dereference in read_cache_page_async().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: stable@kernel.org
2009-11-25 12:27:42 -08:00
Zhenyu Wang
8e9e0eea99 drm/i915: Fix CRT hotplug detect by checking really no channels attached
For CRT hotplug detect status, we have four test results as blue
channel only, green channel only, both blue and green channel, and
no channel attached. Origin code only marks both blue and green channel
case as connected, but ignore other possible connected states. This one
trys to detect CRT by checking no channel attached case instead.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 12:10:18 -08:00
Clemens Ladisch
5349ef3127 drm/fb: fix FBIOGET/PUT_VSCREENINFO pixel clock handling
When the framebuffer driver does not publish detailed timing information
for the current video mode, the correct value for the pixclock field is
zero, not -1.

Since pixclock is actually unsigned, the value -1 would be interpreted
as 4294967295 picoseconds (i.e., about 4 milliseconds) by
register_framebuffer() and userspace programs.

This patch allows X.org's fbdev driver to work.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:04:49 +10:00
Jeremy Fitzhardinge
79cc304f3e drm: make sure page protections are updated after changing vm_flags
Some architectures compute ->vm_page_prot depending on ->vm_flags, so we
need to update the protections after adjusting the flags.

AFAIK this only affects running X under Xen; without this patch you get
lots of coloured blobs on the screen, or maybe a complete lockup.  Or
anything really.

But that still depends on lots of out-of-tree stuff, so I don't think
there are any consequences for anyone else.  But it is wrong in principle.

Reported-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:02:30 +10:00
Jerome Glisse
f82f5f3ac4 drm/radeon/kms: Report vga connector is connected according to ddc_probe
On broken EDID we were reporting vga connector to be disconnected
even if ddc probe did found a monitor. This patch report that the
connector is connected on such case. This allow drm to add a fail
safe mode (800x600 at the time of this patch) thus user can boot
and later add a mode which match its monitor capabilities.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:02:25 +10:00
Jerome Glisse
a698cf34ea drm: mm always protect change to unused_nodes with unused_lock spinlock
unused_nodes modification needs to be protected by unused_lock spinlock.
Here is an example of an usage where there is no such protection without
this patch.

  Process 1: 1-drm_mm_pre_get(this function modify unused_nodes list)
             2-spin_lock(spinlock protecting mm struct)
             3-drm_mm_put_block(this function might modify unused_nodes
               list but doesn't protect modification with unused_lock)
             4-spin_unlock(spinlock protecting mm struct)
  Process2:  1-drm_mm_pre_get(this function modify unused_nodes list)
At this point Process1 & Process2 might both be doing modification to
unused_nodes list. This patch add unused_lock protection into
drm_mm_put_block to avoid such issue.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:02:18 +10:00
Jerome Glisse
0beb81ab45 drm/radeon/kms: Disable TV load detect on RS400,RC410,RS480
RS400,RC410,RS480 chipset seems to report a lot of false positive
with load detect on TV output. We haven't yet found a way to make
load detect reliable on those chipset, thus just disable it for TV
output. Would avoid user to experience phantom screen because X
believe there is a monitor connected to the TV output.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:02:12 +10:00
Dave Airlie
23115b0592 drm/radeon/kms: read back register before writing in IIO.
This fixes RH bugzilla #527874.

On resume the atom posting wasn't working, however vbe posting was
going fine, after 2 weeks over irc, and 8 hrs with the hardware,
I tracked it down to the memory device table and it access the MC
registers via IIO, it appears the rv515 atom iio table might not
be fully functional, so adding a readback before doing a write
either provides enough delay to make things resume correctly.

Thanks to Peng Huang at Red Hat for coming to Brisbane.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:02:07 +10:00
Dave Airlie
ef63062716 drm/radeon/kms: fix handling of d1/d2 vga
An rv515 laptop I got wouldn't startup with a montior plugged in,
found the proper bug hopefully with us not turning off D2VGA
here when we should.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:02:01 +10:00
Jesse Barnes
7064fef563 drm: work around EDIDs with bad htotal/vtotal values
We did this on the userspace side, but we need a similar fix for the
kernel.

Fixes LP #460664.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:01:53 +10:00
Dave Airlie
0ebf17174b drm/radeon/kms: resume AGP by calling init.
AGP resume was broken since we moved to the new init path,
because we never re-enabled AGP on these systems at resume time.

This patch just calls the AGP resume call which just does the reinit
at resume time like the old path did.

Since AGP is pretty much gpu independant I did it outside
the gpu specific code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:01:47 +10:00
Linus Torvalds
cb20c28a9c Merge branch 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc
* 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc:
  Makefile: Add -Wmising-prototypes to HOSTCFLAGS
  oss: Mark loadhex static in hex2hex.c
  dtc: Mark various internal functions static
  dtc: Set "noinput" in the lexer to avoid an unused function
  drm: radeon: Mark several functions static in mkregtable
  arch/sparc/boot/*.c: Mark various internal functions static
  arch/powerpc/boot/addRamDisk.c: Mark several internal functions static
  arch/alpha/boot/tools/objstrip.c: Mark "usage" static
  Documentation/vm/page-types.c: Declare checked_open static
  genksyms: Mark is_reserved_word static
  kconfig: Mark various internal functions static
  kconfig: Make zconf.y work with current bison
2009-11-17 09:14:49 -08:00
Josh Triplett
0592e4c49e drm: radeon: Mark several functions static in mkregtable
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-11-15 15:01:40 -08:00
Zhenyu Wang
5586c8bc93 drm/i915: Add more registers save/restore for Ironlake suspend
Add more display registers save/restore to fix unstable issues
during S4 testing on Ironlake. And DPLL_B_MD should not be restored
on Ironlake.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-12 11:21:14 -08:00
Zou, Nanhai
2d109a845d drm/i915: Fix IRQ stall issue on Ironlake
The master irq control in DE must be disabled before irq handling,
and enable after the process. This fixes the irq stall issue on
Ironlake.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Zou, Nanhai <nanhai.zou@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-12 11:16:33 -08:00
Linus Torvalds
6b46362c0e Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (52 commits)
  drm/kms: Init the CRTC info fields for modes forced from the command line.
  drm/radeon/r600: CS parser updates
  drm/radeon/kms: add debugfs for power management for AtomBIOS devices
  drm/radeon/kms: initial mode validation support
  drm/radeon/kms/atom/dce3: call transmitter init on mode set
  drm/radeon/kms: store detailed connector info
  drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables
  drm/radeon/kms/r600: fix rs880 support v2
  drm/radeon/kms/r700: fix some typos in chip init
  drm/radeon/kms: remove some misleading debugging output
  drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.
  drm/radeon/kms: disable D1VGA and D2VGA if enabled
  drm/radeon/kms: Don't RMW CP_RB_CNTL
  drm/radeon/kms: fix coherency issues on AGP cards.
  drm/radeon/kms: fix rc410 suspend/resume.
  drm/radeon/kms: add quirk for hp dc5750
  drm/radeon/kms/atom: fix potential oops in spread spectrum code
  drm/kms: typo fix
  drm/radeon/kms/atom: Make card_info per device
  drm/radeon/kms/atom: Fix DVO support
  ...
2009-11-11 11:32:04 -08:00
Francisco Jerez
eeba57518c drm/kms: Init the CRTC info fields for modes forced from the command line.
Fixes fdo bug 24710.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-10 13:41:40 +10:00
Alex Deucher
a39533b4dd drm/radeon/r600: CS parser updates
Add some additional regs that require relocs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-10 13:41:07 +10:00
Rafał Miłecki
7433874e31 drm/radeon/kms: add debugfs for power management for AtomBIOS devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-06 14:13:25 +10:00
Alex Deucher
a3fa6320ce drm/radeon/kms: initial mode validation support
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-06 11:35:42 +10:00
Alex Deucher
f95a9f0b05 drm/radeon/kms/atom/dce3: call transmitter init on mode set
Generally this is done at post, but might not always be done
with softboot or for connectors on docking stations.

Could probably be done once when the driver loads/resumes
rather than on each mode set.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-06 11:35:36 +10:00
Alex Deucher
b75fad0682 drm/radeon/kms: store detailed connector info
This will be useful for mode validation and certain
atom tables.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-06 11:35:30 +10:00
Alex Deucher
4170a6c1bc drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-06 11:35:24 +10:00
Alex Deucher
ee59f2b462 drm/radeon/kms/r600: fix rs880 support v2
Lots of cases were wrong or missing.

v2: rebased against drm-next

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-06 11:35:18 +10:00
Zhenyu Wang
d8a2d0e00c drm/i915: HDMI hardware workaround for Ironlake
This brings some hardware workaround for HDMI port on PCH (Ibex Peak),
which fixes unstable issues like during rotation.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:03:28 -08:00
Zhenyu Wang
4bfe6b6876 drm/i915: Fix and cleanup DPLL calculation for Ironlake
When the ideal error range can't be reached, this will safely use
a most closed one. Clean up some dumb codes in DPLL function too.

This fixes DPLL clock issue against one monitor at 1680x1050@60hz.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:00:32 -08:00
Chris Wilson
ba86bf8bfc drm/i915: Avoid potential sleep whilst holding spinlock
Miles Lane reported the following error:
2 locks held by cat/4179:
  #0:  (&p->lock){+.+.+.}, at: [<c10a3884>] seq_read+0x25/0x315
  #1:  (&dev_priv->mm.active_list_lock){+.+...}, at: [<c119a854>]
i915_batchbuffer_info+0x2b/0x124
Pid: 4179, comm: cat Not tainted 2.6.32-rc5-git1 #2
Call Trace:
  [<c104874f>] ? __debug_show_held_locks+0x1e/0x20
  [<c1023fb0>] __might_sleep+0xf0/0xf7
  [<c101c393>] kmap+0x17/0x58
  [<c119a8d6>] i915_batchbuffer_info+0xad/0x124
  [<c10a39bf>] seq_read+0x160/0x315
  [<c108fb8c>] ? rw_verify_area+0x98/0xbb
  [<c10a385f>] ? seq_read+0x0/0x315
  [<c1090331>] vfs_read+0x75/0xa9
  [<c10903f9>] sys_read+0x3b/0x5d
  [<c1002a8f>] sysenter_do_call+0x12/0x36

The fix is relatively simple, use the atomic variants of kmap() that
avoid the potential sleep.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 13:33:22 -08:00
Linus Torvalds
91d3f9bacd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Ironlake suspend/resume support
  drm/i915: kill warning in intel_find_pll_g4x_dp
  drm/i915: update watermarks before enabling PLLs
  drm/i915: add FIFO watermark support for G4x
  drm/i915: quiet DP i2c init
  drm/i915: fix panel fitting filter coefficient select for Ironlake
  drm/i915: fix to setup display reference clock control on Ironlake
  drm/i915: Install a fence register for fbc on g4x
  drm/i915: save/restore BLC histogram control reg across suspend/resume
  drm/i915: Fix FDI M/N setting according with correct color depth
  drm/i915: disable powersave feature for Ironlake currently
  drm/i915: Fix render reclock availability detection.
  drm/i915: Save and restore the GM45 FBC regs on suspend and resume.
  drm/i915: Set the LVDS_BORDER when using LVDS scaling mode
  drm/i915: disable FBC for Pineview, fixing a boot hang.
2009-11-04 07:05:43 -08:00
Alex Deucher
e29649db3b drm/radeon/kms/r700: fix some typos in chip init
Noticed by Andre on IRC.

Also fix up some minor whitespace issues.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-04 13:39:17 +10:00
Alex Deucher
6fa8d66af8 drm/radeon/kms: remove some misleading debugging output
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-04 13:38:02 +10:00
Dave Airlie
4d357abb89 drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.
The Lenovo W500 laptop hangs inside an SMI on brightness changes,
I thought it just needed the VGA disable but it turned out to require
slightly more work, setting the MC locations up just like the IGP
chip requirements seems to make it all happy again and I can boot
and play with brightness.

We should probably just do this for all chips and give up the VRAM
at 0x0 idea, it never seems to buy us anything but pain.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-04 12:12:44 +10:00
Dave Airlie
8a9832e89f drm/radeon/kms: disable D1VGA and D2VGA if enabled
Once kms is enabled we don't need these, and it causes a problem
with the Lenovo W500 ACPI brightness implementation, it hangs
in a loop inside an SMI.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-04 09:53:42 +10:00
Alex Deucher
d6f28938d9 drm/radeon/kms: Don't RMW CP_RB_CNTL
Immediate readback seems faulty on some chips.  I
suspect it takes a while to get through the fifo
to the actual register backbone.  There's no need
to read it back, so, just write the driver's copy
of the register's value directly.

Should fix bug 24535 and possibly 24218

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-04 09:53:25 +10:00
Dave Airlie
df67bed92f drm/radeon/kms: fix coherency issues on AGP cards.
When we are evicting from VRAM->RAM we allocate the ttm object,
but we don't set the caching policy on it before blitting into it.
This means on AGP we end up blitting into cached pages, and
the CPU later flushes out on top of them. This was mostly seen as
font corruption.

The other question is why we don't evict VRAM->GTT in a lot of cases,
this would save us some cache transitions since a lot of objects
that are evicted from VRAM will probably end up being pulled back in
a few operations later, and evicting them to system memory involves
2 unnecessary cache transitions.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-04 09:53:14 +10:00
Linus Torvalds
c9354c85c1 i915: fix intel graphics suspend breakage due to resume/lid event confusion
In commit c1c7af6089 ("drm/i915: force
mode set at lid open time") the intel graphics driver was taught to
restore the LVDS mode on lid open.

That caused problems with interaction with the suspend/resume code,
which commonly runs at the same time (suspend is often caused by the lid
close event, while lid open is commonly a resume event), which was
worked around with in commit 06891e27a9
("drm/i915: fix suspend/resume breakage in lid notifier").

However, in the meantime the lid event code had also grown a user event
notifier (commit 06324194ee: "drm/i915:
generate a KMS uevent at lid open/close time"), and now _that_ causes
problems with suspend/resume and some versions of Xorg reacting to those
uevents by setting the mode.

So this effectively reverts that commit 06324194ee, and makes the lid
open protection logic against suspend/resume more explicit.  This fixes
at least one laptop. See

	http://bugzilla.kernel.org/show_bug.cgi?id=14484

for more details.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-02 09:29:55 -08:00
Dave Airlie
ea1495a627 drm/radeon/kms: fix rc410 suspend/resume.
This fixes suspend/resume on my rc410 motherboard, it restores
the memory controller setup before posting the GPU, since it seems
to need the MC_FB_LOCATION setup correctly.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 16:01:58 +10:00
Alex Deucher
fc7f7119d2 drm/radeon/kms: add quirk for hp dc5750
Doesn't have a tv-out port

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 15:52:17 +10:00
Alex Deucher
d11aa88b33 drm/radeon/kms/atom: fix potential oops in spread spectrum code
Make sure we have an LVDS encoder before casting enc_priv.

[airlied: also fix two missing cpu_to_le16 casts we noticed on irc]

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 15:30:03 +10:00
James Simmons
a2d49ae7df drm/kms: typo fix
I believe this is a typo.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 15:26:56 +10:00
Mathias Fröhlich
61c4b24b3e drm/radeon/kms/atom: Make card_info per device
Make the struct card_info, which is a per struct radeon_device dataset, a
struct member of the radeon device instead of a static per kernel module
value. This should avoid potential problems with two radeon cards installed in
one system.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 13:34:21 +10:00
Alex Deucher
d56ef9c8fd drm/radeon/kms/atom: Fix DVO support
DVO in 12 bit mode (which seems to be the most common
config) requires 2x ppll.

Fixes fdo bug 21857.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 13:34:19 +10:00
Alex Deucher
8f552a66a4 drm/radeon/kms/atom: loosen pll min output limits
Limiting the pll output range is a good thing generally as
it limits the number of possible pll combinations for a given
frequency presumably to the ones that work best on each card.
That's why the limits are in the bios tables. However, certain
duallink DVI monitors seem to like pll combinations that would
be limited by this at least on pre-DCE 3.0 r6xx hardware.  This
might need to be adjusted per family or per clock range in the
future.

See fdo bug 24727.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 13:34:18 +10:00