Add the new GP1 PLL for the Amlogic SM1 SoC, used to feed the new
DynamIQ Shared Unit of the ARM Cores Complex.
This also adds a dedicated set of clock and compatible for SM1.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
On the g12a, the register space dedicated to the audio clock also
provides some resets. Let the clock controller register a reset
provider as well for this SoC family.
the axg SoC family does not appear to provide this feature.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Expose the CPUB clock id to add DVFS to the second CPU cluster of
the Amlogic G12B SoC.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
In order to implement clock switching for the CLKID_CPU_CLK and
CLKID_CPUB_CLK, notifiers are added on specific points of the
clock tree :
cpu_clk / cpub_clk
| \- cpu_clk_dyn
| | \- cpu_clk_premux0
| | |- cpu_clk_postmux0
| | | |- cpu_clk_dyn0_div
| | | \- xtal/fclk_div2/fclk_div3
| | \- xtal/fclk_div2/fclk_div3
| \- cpu_clk_premux1
| |- cpu_clk_postmux1
| | |- cpu_clk_dyn1_div
| | \- xtal/fclk_div2/fclk_div3
| \- xtal/fclk_div2/fclk_div3
\ sys_pll / sys1_pll
This for each cluster, a single one for G12A, two for G12B.
Each cpu_clk_premux1 tree is marked as read-only and CLK_SET_RATE_NO_REPARENT,
to be used as "parking" clock in a safe clock frequency.
A notifier is added on each cpu_clk_premux0 to detech when CCF want to
change the frequency of the cpu_clk_dyn tree.
In this notifier, the cpu_clk_premux1 tree is configured to use the xtal
clock and then the cpu_clk_dyn is switch to cpu_clk_premux1 while CCF
updates the cpu_clk_premux0 tree.
A notifier is added on each sys_pll/sys1_pll to detect when CCF wants to
change the PLL clock source of the cpu_clk.
In this notifier, the cpu_clk is switched to cpu_clk_dyn while CCF
updates the sys_pll/sys1_pll frequency.
A third small notifier is added on each cpu_clk / cpub_clk and cpu_clk_dyn,
add a small delay at PRE_RATE_CHANGE/POST_RATE_CHANGE to let the other
notofiers change propagate before changing the cpu_clk_premux0 and sys_pll
clock trees.
This notifier set permits switching the cpu_clk / cpub_clk without any
glitches and using a safe parking clock while switching between sub-GHz
clocks using the cpu_clk_dyn tree.
This setup has been tested and validated on the Amlogic G12A and G12B
SoCs running the arm64 cpuburn at [1] and cycling between all the possible
cpufreq translations of each cluster and checking the final frequency using
the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add a clock driver for the cpu dynamic divider, this divider needs
to have a flag set before setting the divider value then removed
while writing the new value to the register.
This drivers implements this behavior and will be used essentially
on the Amlogic G12A and G12B SoCs for cpu clock trees.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The clk input function which allows clock controllers to register a bypass
clock from a clock producer is no longer needed anymore since meson clock
controllers have migrated to a new parent allocation method.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
During probe, bypass clocks (i.e. ee-in-xtal) are made from device-tree
inputs to provide input clocks which can be access through global name.
The cons of this method are the duplicated clocks, means more string
comparison.
Specify parent directly with device-tree clock name.
Remove the bypass clock registration from the ee probe function.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (ie. when
all clocks are local to the controller) and use .parent_data otherwise.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
During probe, bypass clocks (i.e. ao-in-xtal) are made from device-tree
inputs to provide input clocks which can be access through global name.
The cons of this method are the duplicated clocks, means more string
comparison.
Specify parent directly with device-tree clock name.
Function to regiter bypass clocks is removed.
Input parameters from meson aoclk data structure are deprecated and then
deleted since all aoclk files are migrated.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized. A recent patch [0]
allows parents to be specified without string names or with device-tree
clock name by using a new assignment structure.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
[0] commit fc0c209c14 ("clk: Allow parents to be specified without string names")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
[jbrunet@baylibre.com: remove CLK_SET_RATE_PARENT from mst muxes]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Replace hihi by hifi in the mali parent_names of the g12a SoC family.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
side. The two main highlights in the core framework are the addition of an bulk
clk_get API that handles optional clks and an extra debugfs file that tells the
developer about the current parent of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is mostly
because that SoC has started converting to the clk_hw style of clk
registration. The next big update is in the Amlogic meson clk driver that
gained some support for audio, cpu, and temperature clks while fixing some PLL
issues. Finally, the biggest thing that stands out is the conversion of a large
part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
less strings and more pointer comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks here and
there to clk data along with the normal addition of a handful of new drivers
and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1
-----BEGIN PGP SIGNATURE-----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=mK0C
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio
-----BEGIN PGP SIGNATURE-----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=3QYB
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is
a nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix divider entry for the emac clocks
clk: Do a DT parent lookup even when index < 0
clk: tegra210: Fix default rates for HDA clocks
clk: ti: clkctrl: Fix returning uninitialized data
clk: meson: meson8b: fix a typo in the VPU parent names array variable
clk: meson: fix MPLL 50M binding id typo
On Amlogic Meson G12b platform, the fclk_div3 seems to be necessary for
the system to operate correctly.
Disabling it cause the entire system to freeze, including peripherals.
Let's mark this clock as critical, fixing boot on G12b platforms.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Update the Meson G12A Clock driver to support the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Here only the cpu clock tree is handled.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the TS clocks used by two temperature sensors
Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [fixed commit description]
Add the cts_i958 clock to control the clock source of the spdif output
block. It is used to select whether the clock source of the spdif output
is cts_amclk (when data are taken from i2s buffer) or the cts_mclk_i958
(when data are taken from the spdif buffer). The setup for this clock is
identical to GXBB, so this ports commit 7eaa44f620 ("clk: meson:
gxbb: add cts_i958 clock") to the Meson8/Meson8b/Meson8m2 clock driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the SPDIF master clock also referred as cts_mclk_i958. The setup for
this clock is identical to GXBB, so this ports commit 3c277c247e
("clk: meson: gxbb: add cts_mclk_i958") to the Meson8/Meson8b/Meson8m2
clock driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add the I2S master clock also referred as cts_amclk. The setup for this
clock is identical to GXBB, so this ports commit 4087bd4b21 ("clk:
meson: gxbb: add cts_amclk") to the Meson8/Meson8b/Meson8m2 clock
driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like the PLL and MPLL, the controller may require some magic setting to
be applied on startup.
This is needed when the initial setting is not applied by the boot ROM.
The controller need to do it when the setting applies to several clock,
like all the MPLLs in the case of g12a.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Until now (gx and axg), the mpll setting on boot (whatever the
bootloader) was good enough to generate a clean fractional division.
It is not the case on the g12a. While moving away from the vendor u-boot,
it was noticed the fractional part of the divider was no longer applied.
Like on the pll, some magic settings need to applied on the mpll
register.
This change adds the ability to do that on the mpll driver.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
After testing, it appears that the SSEN bit controls the spread
spectrum function on MPLL2, not MPLL0.
Fixes: 78b4af312f ("clk: meson-axg: add clock controller drivers")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The documentation says there is an SSEN bit on mpll0 but, after testing
it, no spread spectrum function appears to be enabled by this bit on any
of the MPLLs.
Let's remove it until we know more
Fixes: 1f737ffa13 ("clk: meson: mpll: fix mpll0 fractional part ignored")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The bit 'SSEN' available on some MPLL DSS outputs is not related to the
fractional part of the divider but to the function called
'Spread Spectrum'.
This function might be used to solve EM issues by adding a jitter on
clock signal. This widens the signal spectrum and weakens the peaks in it.
While spread spectrum might be useful for some application, it is
problematic for others, such as audio.
This patch introduce a new flag to the MPLL driver to enable (or not) the
spread spectrum function.
Fixes: 1f737ffa13 ("clk: meson: mpll: fix mpll0 fractional part ignored")
Tested-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The variable which holds the parent names for the VPU clocks has a typo
in it. Fix this typo to make the variable naming in the driver
consistent. No functional changes.
Fixes: 41785ce562 ("clk: meson: meson8b: add the VPU clock trees")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
MPLL_5OM (the capital letter o) should indeed be MPLL_50M (the number)
Fix this before it gets used.
Fixes: 25db146aa7 ("dt-bindings: clk: meson: add g12a periph clock controller bindings")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
- Remove clk_readl() and introduce BE versions of basic clk types
* clk-doc:
clk: Drop duplicate clk_register() documentation
clk: Document and simplify clk_core_get_rate_nolock()
clk: Remove 'flags' member of struct clk_fixed_rate
clk: nxp: Drop 'flags' on fixed_rate clk macro
clk: Document __clk_mux_determine_rate()
clk: Document CLK_MUX_READ_ONLY mux flag
clk: Document deprecated things
clk: Collapse gpio clk kerneldoc
* clk-more-critical:
clk: highbank: Convert to CLK_IS_CRITICAL
* clk-meson: (21 commits)
clk: meson: axg-audio: add g12a support
clk: meson: axg-audio: don't register inputs in the onecell data
clk: meson: axg_audio: replace prefix axg by aud
dt-bindings: clk: axg-audio: add g12a support
clk: meson: meson8b: add the video decoder clock trees
clk: meson: meson8b: add the VPU clock trees
clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
clk: meson: meson8b: use a separate clock table for Meson8m2
dt-bindings: clock: meson8b: export the video decoder clocks
clk: meson-g12a: add video decoder clocks
dt-bindings: clock: meson8b: export the VPU clock
clk: meson-g12a: add PCIE PLL clocks
dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL
dt-bindings: clock: meson8b: drop the "ABP" clock definition
clk: meson: g12a: add cpu clocks
dt-bindings: clk: g12a-clkc: add VDEC clock IDs
dt-bindings: clock: axg-audio: unexpose controller inputs
dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID
clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id
...
* clk-basic-be:
clk: core: replace clk_{readl,writel} with {readl,writel}
clk: core: remove powerpc special handling
powerpc/512x: mark clocks as big endian
clk: mux: add explicit big endian support
clk: multiplier: add explicit big endian support
clk: gate: add explicit big endian support
clk: fractional-divider: add explicit big endian support
clk: divider: add explicit big endian support
The g12a audio clock controller is largely similar to the existing axg
controller, with the addition of the spdif output B and TDM pad clocks.
This commit extends the existing axg audio clock controller driver
to work with multiple compatibles and add the g12a specific clocks
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190329160649.31603-5-jbrunet@baylibre.com
Clock inputs should not be exported outside the controller. It is a hack
to have a stable global clock name within the clock controller, even for
clocks external to the controller.
There is an ongoing effort to replace this hack with something better.
The first step is to not register those clocks in the provider anymore,
so we can completely remove them later on.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190329160649.31603-4-jbrunet@baylibre.com
The audio clock controller is compatible with axg and g12a SoC family.
Having each clock name prefixed with "axg_" looks weird on the g12a.
This change replace the "axg_" by "aud_" in fron the clock names.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190329160649.31603-3-jbrunet@baylibre.com
This adds the four video decoder clock trees.
VDEC_1 is split into two paths on Meson8b and Meson8m2:
- input mux called "vdec_1_sel"
- two dividers ("vdec_1_1_div" and "vdec_1_2_div") and gates ("vdec_1_1"
and "vdec_1_2")
- and an output mux (probably glitch-free) called "vdec_1"
On Meson8 the VDEC_1 tree is simpler because there's only one path:
- input mux called "vdec_1_sel"
- divider ("vdec_1_1_div") and gate ("vdec_1_1")
- (the gate is used as output directly, there's no mux)
The VDEC_HCODEC and VDEC_2 clocks are simple composite clocks each
consisting of an input mux, divider and a gate.
The VDEC_HEVC clock seems to have two paths similar to the VDEC_1 clock.
However, the register offsets of the second clock path is not known.
Amlogic's 3.10 kernel (which is used as reference) sets
HHI_VDEC2_CLK_CNTL[31] to 1 before changing the VDEC_HEVC clock and back
to 0 afterwards. For now, leave a TODO comment and only add the first
path.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151423.19063-3-martin.blumenstingl@googlemail.com
The VPU clock tree is slightly different on all three supported SoCs:
Meson8 only has an input mux (which chooses between "fclk_div4",
"fclk_div3", "fclk_div5" and "fclk_div7"), a divider and a gate.
Meson8b has two VPU clock trees, each with an input mux (using the same
parents as the input mux on Meson8), divider and a gates. The final VPU
clock is a glitch-free mux which chooses between VPU_1 and VPU_2.
Meson8m2 uses a similar clock tree as Meson8b but the last input clock
is different: instead of using "fclk_div7" as input Meson8m2 uses
"gp_pll". This was probably done in hardware to improve the accuracy of
the clock because fclk_div7 gives us 2550MHz / 7 = 364.286MHz while
GP_PLL can achieve 364.0MHz.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-5-martin.blumenstingl@googlemail.com
Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which
is used as input for the VPU clocks.
The only supported frequency (based on Amlogic's vendor kernel sources)
is 364MHz which is achieved using the following parameters:
- input: XTAL (24MHz)
- M = 182
- N = 3
- OD = 2 ^ 2
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-4-martin.blumenstingl@googlemail.com
Meson8, Meson8b and Meson8m2 implement a similar clock controller.
However, there are a few differences between the three actual IP blocks.
One example where Meson8m2 differs from Meson8b is the VPU clock setup:
- the VPU input mux can choose between "fclk_div4", "fclk_div3",
"fclk_div5" and "fclk_div7" on Meson8b
- however, on Meson8m2 it can choose between "fclk_div4", "fclk_div3",
"fclk_div5" and "gp_pll" (GP_PLL only exists on Meson8m2, it's the
predecessor of the GP0_PLL clock on GXBB/GXL/GXM))
Add a separate clk_hw_onecell_data table for Meson8m2 so these
differences can be implemented in our clock controller driver. For now
meson8m2_hw_onecell_data is a clone of our existing
meson8b_hw_onecell_data.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-3-martin.blumenstingl@googlemail.com
Add the necessary clock parts for:
- VDEC_1: used to feed VDEC_1
- VDEC_HEVC: the "back" part of the VDEC_HEVC block
- VDEC_HEVCF: the "front" part of the VDEC_HEVC block
In previous SoC generations (GXL, GXBB), there was only one VDEC_HEVC
clock, which got split in two parts for G12A.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319101138.27520-2-mjourdan@baylibre.com
Add the PCIe reference clock feeding the USB3 + PCIE combo PHY.
This PLL needs a very precise register sequence to permit to be locked,
thus using the specific clk-pll pcie ops.
The PLL is then followed by :
- a fixed /2 divider
- a 5-bit 1-based divider
- a final /2 divider
This reference clock is fixed to 100MHz, thus only a single PLL setup
is added.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190307141455.23879-4-narmstrong@baylibre.com
The Meson G12A PCIE PLL is fined tuned to deliver a very precise
100MHz reference clock for the PCIe Analog PHY, and thus requires
a strict register sequence to enable the PLL.
To simplify, use the _init() op to enable the PLL and keep
the other ops except set_rate since the rate is fixed.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190307141455.23879-2-narmstrong@baylibre.com
Add the Amlogic G12A Family CPU Clock tree in read/only for now.
The CPU clock can either use the SYS_PLL for > 1GHz frequencies or
use a couple of div+mux from 1GHz/667MHz/24MHz source with 2 non-glitch
muxes.
Proper DVFS support will come in a second time.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: fixed cpu clocks namings]
Link: https://lkml.kernel.org/r/20190304131129.7762-3-narmstrong@baylibre.com
When submitted v2 of the G12A AO-CLK IDs, the CLKID_AO_CTS_OSCIN was moved
to the internal non-exported bindings, but this clock is necessary for
the second AO-CEC-B module since it embeds the 32768Hz dual-divider
clock generator unlike the AO-CEC-A module.
Export it back to the public bindings.
Fixes: be3d960b0a ("dt-bindings: clk: add G12A AO Clock and Reset Bindings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20190321092010.14382-1-narmstrong@baylibre.com
