Commit Graph

1002 Commits

Author SHA1 Message Date
Chris Mason
3b30c22f64 Btrfs: Add mount -o nossd
This allows you to turn off the ssd mode via remount.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:50 -04:00
Chris Mason
d644d8a1e3 Btrfs: avoid IO stalls behind congested devices in a multi-device FS
The btrfs IO submission threads try to service a bunch of devices with a small
number of threads.  They do a congestion check to try and avoid waiting
on requests for a busy device.

The checks make sure we've sent a few requests down to a given device just so
that we aren't bouncing between busy devices without actually sending down
any IO.  The counter used to decide if we can switch to the next device
is somewhat overloaded.  It is also being used to decide if we've done
a good batch of requests between the WRITE_SYNC or regular priority lists.
It may get reset to zero often, leaving us hammering on a busy device
instead of moving on to another disk.

This commit adds a new counter for the number of bios sent while
servicing a device.  It doesn't get reset or fiddled with.  On
multi-device filesystems, this fixes IO stalls in streaming
write workloads.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:49 -04:00
Chris Mason
d84275c938 Btrfs: don't allow WRITE_SYNC bios to starve out regular writes
Btrfs uses dedicated threads to submit bios when checksumming is on,
which allows us to make sure the threads dedicated to checksumming don't get
stuck waiting for requests.  For each btrfs device, there are
two lists of bios.  One list is for WRITE_SYNC bios and the other
is for regular priority bios.

The IO submission threads used to process all of the WRITE_SYNC bios first and
then switch to the regular bios.  This commit makes sure we don't completely
starve the regular bios by rotating between the two lists.

WRITE_SYNC bios are still favored 2:1 over the regular bios, and this tries
to run in batches to avoid seeking.  Benchmarking shows this eliminates
stalls during streaming buffered writes on both multi-device and
single device filesystems.

If the regular bios starve, the system can end up with a large amount of ram
pinned down in writeback pages.  If we are a little more fair between the two
classes, we're able to keep throughput up and make progress on the bulk of
our dirty ram.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:49 -04:00
Chris Mason
585ad2c379 Btrfs: fix metadata dirty throttling limits
Once a metadata block has been written, it must be recowed, so the
btrfs dirty balancing call has a check to make sure a fair amount of metadata
was actually dirty before it started writing it back to disk.

A previous commit had changed the dirty tracking for metadata without
updating the btrfs dirty balancing checks.  This commit switches it
to use the correct counter.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:48 -04:00
Chris Mason
2c943de6ad Btrfs: reduce mount -o ssd CPU usage
The block allocator in SSD mode will try to find groups of free blocks
that are close together.  This commit makes it loop less on a given
group size before bumping it.

The end result is that we are less likely to fill small holes in the
available free space, but we don't waste as much CPU building the
large cluster used by ssd mode.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:48 -04:00
Chris Mason
cfbb930846 Btrfs: balance btree more often
With the new back reference code, the cost of a balance has gone down
in terms of the number of back reference updates done.  This commit
makes us more aggressively balance leaves and nodes as they become
less full.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:47 -04:00
Chris Mason
b361242102 Btrfs: stop avoiding balancing at the end of the transaction.
When the delayed reference code was added, some checks were added
to avoid extra balancing while the delayed references were being flushed.
This made for less efficient btrees, but it reduced the chances of
loops where no forward progress was made because the balances made
more delayed ref updates.

With the new dead root removal code and the mixed back references,
the extent allocation tree is no longer using precise back refs, and
the delayed reference updates don't carry the risk of looping forever
anymore.  So, the balance avoidance is no longer required.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:47 -04:00
Yan Zheng
5d4f98a28c Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.

When a tree block in subvolume tree is cow'd, the reference counts of all
extents it points to are increased by one.  At transaction commit time,
the old root of the subvolume is recorded in a "dead root" data structure,
and the btree it points to is later walked, dropping reference counts
and freeing any blocks where the reference count goes to 0.

The increments done during cow and decrements done after commit cancel out,
and the walk is a very expensive way to go about freeing the blocks that
are no longer referenced by the new btree root.  This commit reduces the
transaction overhead by avoiding the need for dead root records.

When a non-shared tree block is cow'd, we free the old block at once, and the
new block inherits old block's references. When a tree block with reference
count > 1 is cow'd, we increase the reference counts of all extents
the new block points to by one, and decrease the old block's reference count by
one.

This dead tree avoidance code removes the need to modify the reference
counts of lower level extents when a non-shared tree block is cow'd.
But we still need to update back ref for all pointers in the block.
This is because the location of the block is recorded in the back ref
item.

We can solve this by introducing a new type of back ref. The new
back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer
by searching the tree. The shortcoming of the new back ref is that it
only works for pointers in tree blocks referenced by their owner trees.

This is mostly a problem for snapshots, where resolving one of these
fuzzy back references would be O(number_of_snapshots) and quite slow.
The solution used here is to use the fuzzy back references in the common
case where a given tree block is only referenced by one root,
and use the full back references when multiple roots have a reference
on a given block.

This commit adds per subvolume red-black tree to keep trace of cached
inodes. The red-black tree helps the balancing code to find cached
inodes whose inode numbers within a given range.

This commit improves the balancing code by introducing several data
structures to keep the state of balancing. The most important one
is the back ref cache. It caches how the upper level tree blocks are
referenced. This greatly reduce the overhead of checking back ref.

The improved balancing code scales significantly better with a large
number of snapshots.

This is a very large commit and was written in a number of
pieces.  But, they depend heavily on the disk format change and were
squashed together to make sure git bisect didn't end up in a
bad state wrt space balancing or the format change.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:46 -04:00
Yan Zheng
5c939df56c btrfs: Fix set/clear_extent_bit for 'end == (u64)-1'
There are some 'start = state->end + 1;' like code in set_extent_bit
and clear_extent_bit. They overflow when end == (u64)-1.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:46 -04:00
Linus Torvalds
064e38aade Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: Fix oops and use after free during space balancing
  Btrfs: set device->total_disk_bytes when adding new device
2009-06-05 11:54:28 -07:00
Chris Mason
44fb551163 Btrfs: Fix oops and use after free during space balancing
The btrfs allocator uses list_for_each to walk the available block
groups when searching for free blocks.  It starts off with a hint
to help find the best block group for a given allocation.

The hint is resolved into a block group, but we don't properly check
to make sure the block group we find isn't in the middle of being
freed due to filesystem shrinking or balancing.  If it is being
freed, the list pointers in it are bogus and can't be trusted.  But,
the code happily goes along and uses them in the list_for_each loop,
leading to all kinds of fun.

The fix used here is to check to make sure the block group we find really
is on the list before we use it.  list_del_init is used when removing
it from the list, so we can do a proper check.

The allocation clustering code has a similar bug where it will trust
the block group in the current free space cluster.  If our allocation
flags have changed (going from single spindle dup to raid1 for example)
because the drives in the FS have changed, we're not allowed to use
the old block group any more.

The fix used here is to check the current cluster against the
current allocation flags.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-04 15:41:27 -04:00
Yan Zheng
2cc3c559fb Btrfs: set device->total_disk_bytes when adding new device
It was not being properly initialized, and so the size saved to
disk was not correct.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-04 09:23:57 -04:00
Linus Torvalds
5732c46849 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: Spelling fix in btrfs_lookup_first_block_group comments
  Btrfs: make show_options result match actual option names
  Btrfs: remove outdated comment in btrfs_ioctl_resize()
  Btrfs: remove some WARN_ONs in the IO failure path
  Btrfs: Don't loop forever on metadata IO failures
  Btrfs: init inode ordered_data_close flag properly
2009-05-14 19:18:44 -07:00
Sankar P
9f55684c2d Btrfs: Spelling fix in btrfs_lookup_first_block_group comments
Signed-off-by: Sankar P <sankar.curiosity@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14 14:00:34 -04:00
Sage Weil
6b65c5c61b Btrfs: make show_options result match actual option names
The notreelog and flushoncommit mount options were being printed slightly
differently.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14 14:00:34 -04:00
Li Hong
5d847a8ed9 Btrfs: remove outdated comment in btrfs_ioctl_resize()
In Li Zefan's commit dae7b665cf,
a combination call of kmalloc() and copy_from_user() is replaced by
memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14 14:00:33 -04:00
Chris Mason
cc7b0c9b70 Btrfs: remove some WARN_ONs in the IO failure path
These debugging WARN_ONs make too much console noise during regular
IO failures.  An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14 14:00:33 -04:00
Chris Mason
76a05b35a3 Btrfs: Don't loop forever on metadata IO failures
When a btrfs metadata read fails, the first thing we try to do is find
a good copy on another mirror of the block.  If this fails, read_tree_block()
ends up returning a buffer that isn't up to date.

The btrfs btree reading code was reworked to drop locks and repeat
the search when IO was done, but the changes didn't add a check for failed
reads.  The end result was looping forever on buffers that were never
going to become up to date.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14 14:00:32 -04:00
Chris Mason
2757495c90 Btrfs: init inode ordered_data_close flag properly
This flag is used to decide when we need to send a given file through
the ordered code to make sure it is fully written before a transaction
commits.  It was not being properly set to zero when the inode was
being setup.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14 14:00:31 -04:00
Al Viro
6f5bbff9a1 Convert obvious places to deactivate_locked_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09 10:49:40 -04:00
Linus Torvalds
4ebf662337 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: look for acls during btrfs_read_locked_inode
  Btrfs: fix acl caching
  Btrfs: Fix a bunch of printk() warnings.
  Btrfs: Fix a trivial warning using max() of u64 vs ULL.
  Btrfs: remove unused btrfs_bit_radix slab
  Btrfs: ratelimit IO error printks
  Btrfs: remove #if 0 code
  Btrfs: When shrinking, only update disk size on success
  Btrfs: fix deadlocks and stalls on dead root removal
  Btrfs: fix fallocate deadlock on inode extent lock
  Btrfs: kill btrfs_cache_create
  Btrfs: don't export symbols
  Btrfs: simplify makefile
  Btrfs: try to keep a healthy ratio of metadata vs data block groups
2009-04-27 11:16:33 -07:00
Chris Mason
46a53cca82 Btrfs: look for acls during btrfs_read_locked_inode
This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items.
If it is certain a given inode has no acls, it will set the in memory acl
fields to null to avoid acl lookups completely.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 13:18:35 -04:00
Chris Mason
7b1a14bbb0 Btrfs: fix acl caching
Linus noticed the btrfs code to cache acls wasn't properly caching
a NULL acl when the inode didn't have any acls.  This meant the common
case of no acls resulted in expensive btree searches every time the
kernel checked permissions (which is quite often).

This is a modified version of Linus' original patch:

Properly set initial acl fields to BTRFS_ACL_NOT_CACHED in the inode.
This forces an acl lookup when permission checks are done.

Fix btrfs_get_acl to avoid lookups and locking when the inode acls fields
are set to null.

Fix btrfs_get_acl to use the right return value from __btrfs_getxattr
when deciding to cache a NULL acl.  It was storing a NULL acl when
__btrfs_getxattr return -ENOENT, but __btrfs_getxattr was actually returning
-ENODATA for this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 13:18:26 -04:00
Joel Becker
21380931eb Btrfs: Fix a bunch of printk() warnings.
Just happened to notice a bunch of %llu vs u64 warnings.  Here's a patch
to cast them all.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 08:37:49 -04:00
Joel Becker
e63b6a6c0f Btrfs: Fix a trivial warning using max() of u64 vs ULL.
A small warning popped up on ia64 because inode-map.c was comparing a
u64 object id with the ULL FIRST_FREE_OBJECTID.  My first thought was
that all the OBJECTID constants should contain the u64 cast because
btrfs code deals entirely in u64s.  But then I saw how large that was,
and figured I'd just fix the max() call.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 08:37:49 -04:00
Chris Mason
45c06543af Btrfs: remove unused btrfs_bit_radix slab
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 08:37:48 -04:00
Chris Mason
193f284d49 Btrfs: ratelimit IO error printks
Btrfs has printks for various IO errors, including bad checksums and
mismatches between what we expect the block headers to contain and what
we actually find on the disk.

Longer term we need a real reporting mechanism for this, but for now
printk is going to have to do.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 07:41:47 -04:00
Chris Mason
b7967db75a Btrfs: remove #if 0 code
Btrfs had some old code sitting around under #if 0, this drops it.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 07:40:52 -04:00
Chris Ball
d6397baee4 Btrfs: When shrinking, only update disk size on success
Previously, we updated a device's size prior to attempting a shrink
operation.  This patch moves the device resizing logic to only happen if
the shrink completes successfully.  In the process, it introduces a new
field to btrfs_device -- disk_total_bytes -- to track the on-disk size.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 07:40:51 -04:00
Chris Mason
59bc5c758e Btrfs: fix deadlocks and stalls on dead root removal
After a transaction commit, the old root of the subvol btrees are sent through
snapshot removal.  This is what actually frees up any blocks replaced by
COW, and anything the old blocks pointed to.

Snapshot deletion will pause when a transaction commit has started, which
helps to avoid a huge amount of delayed reference count updates piling up
as the transaction is trying to close.

But, this pause happens after the snapshot deletion process has asked other
procs on the system to throttle back a bit so that it can make progress.

We don't want to throttle everyone while we're waiting for the transaction
commit, it leads to deadlocks in the user transaction ioctls used by Ceph
and makes things slower in general.

This patch changes things to avoid the throttling while we sleep.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:05 -04:00
Chris Mason
e980b50cda Btrfs: fix fallocate deadlock on inode extent lock
The btrfs fallocate call takes an extent lock on the entire range
being fallocated, and then runs through insert_reserved_extent on each
extent as they are allocated.

The problem with this is that btrfs_drop_extents may decide to try
and take the same extent lock fallocate was already holding.  The solution
used here is to push down knowledge of the range that is already locked
going into btrfs_drop_extents.

It turns out that at least one other caller had the same bug.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:05 -04:00
Christoph Hellwig
9601e3f633 Btrfs: kill btrfs_cache_create
Just use kmem_cache_create directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:04 -04:00
Christoph Hellwig
0d4bf11e53 Btrfs: don't export symbols
Currently the extent_map code is only for btrfs so don't export it's
symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:04 -04:00
Christoph Hellwig
2ea2544ef5 Btrfs: simplify makefile
Get rid of the hacks for building out of tree, and always use += for
assigning to the object lists.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:03 -04:00
Josef Bacik
97e728d435 Btrfs: try to keep a healthy ratio of metadata vs data block groups
This patch makes the chunk allocator keep a good ratio of metadata vs data
block groups.  By default for every 8 data block groups, we'll allocate 1
metadata chunk, or about 12% of the disk will be allocated for metadata.  This
can be changed by specifying the metadata_ratio mount option.

This is simply the number of data block groups that have to be allocated to
force a metadata chunk allocation.  By making sure we allocate metadata chunks
more often, we are less likely to get into situations where the whole disk
has been allocated as data block groups.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:02 -04:00
Linus Torvalds
ccc5ff94c6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix btrfs fallocate oops and deadlock
  Btrfs: use the right node in reada_for_balance
  Btrfs: fix oops on page->mapping->host during writepage
  Btrfs: add a priority queue to the async thread helpers
  Btrfs: use WRITE_SYNC for synchronous writes
2009-04-21 14:12:58 -07:00
Chris Mason
546888da82 Btrfs: fix btrfs fallocate oops and deadlock
Btrfs fallocate was incorrectly starting a transaction with a lock held
on the extent_io tree for the file, which could deadlock.  Strictly
speaking it was using join_transaction which would be safe, but it is better
to move the transaction outside of the lock.

When preallocated extents are overwritten, btrfs_mark_buffer_dirty was
being called on an unlocked buffer.  This was triggering an assertion and
oops because the lock is supposed to be held.

The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had
been run.  btrfs_del_item takes care of dirtying things, so the solution is a
to skip the btrfs_mark_buffer_dirty call in this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-21 12:45:12 -04:00
Li Zefan
dae7b665cf btrfs: use memdup_user()
Remove open-coded memdup_user().

Note this changes some GFP_NOFS to GFP_KERNEL, since copy_from_user() may
cause pagefault, it's pointless to pass GFP_NOFS to kmalloc().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-20 23:02:50 -04:00
Chris Mason
8c594ea81d Btrfs: use the right node in reada_for_balance
reada_for_balance was using the wrong index into the path node array,
so it wasn't reading the right blocks.  We never directly used the
results of the read done by this function because the btree search is
started over at the end.

This fixes reada_for_balance to reada in the correct node and to
avoid searching past the last slot in the node.  It also makes sure to
hold the parent lock while we are finding the nodes to read.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:09 -04:00
Chris Mason
11c8349b4e Btrfs: fix oops on page->mapping->host during writepage
The extent_io writepage call updates the writepage index in the inode
as it makes progress.  But, it was doing the update after unlocking the page,
which isn't legal because page->mapping can't be trusted once the page
is unlocked.

This lead to an oops, especially common with compression turned on.  The
fix here is to update the writeback index before unlocking the page.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:09 -04:00
Chris Mason
d313d7a31a Btrfs: add a priority queue to the async thread helpers
Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a
higher priority.  But, the checksumming helper threads prevent it
from being fully effective.

There are two problems.  First, a big queue of pending checksumming
will delay the synchronous IO behind other lower priority writes.  Second,
the checksumming uses an ordered async work queue.  The ordering makes sure
that IOs are sent to the block layer in the same order they are sent
to the checksumming threads.  Usually this gives us less seeky IO.

But, when we start mixing IO priorities, the lower priority IO can delay
the higher priority IO.

This patch solves both problems by adding a high priority list to the async
helper threads, and a new btrfs_set_work_high_prio(), which is used
to make put a new async work item onto the higher priority list.

The ordering is still done on high priority IO, but all of the high
priority bios are ordered separately from the low priority bios.  This
ordering is purely an IO optimization, it is not involved in data
or metadata integrity.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:08 -04:00
Chris Mason
ffbd517d5a Btrfs: use WRITE_SYNC for synchronous writes
Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for
writes we plan on waiting on in the near future.  This patch
mirrors recent changes in other filesystems and the generic code to
use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for
other latency critical writes.

Btrfs uses async worker threads for checksumming before the write is done,
and then again to actually submit the bios.  The bio submission code just
runs a per-device list of bios that need to be sent down the pipe.

This list is split into low priority and high priority lists so the
WRITE_SYNC IO happens first.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:08 -04:00
Linus Torvalds
b983471794 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: BUG to BUG_ON changes
  Btrfs: remove dead code
  Btrfs: remove dead code
  Btrfs: fix typos in comments
  Btrfs: remove unused ftrace include
  Btrfs: fix __ucmpdi2 compile bug on 32 bit builds
  Btrfs: free inode struct when btrfs_new_inode fails
  Btrfs: fix race in worker_loop
  Btrfs: add flushoncommit mount option
  Btrfs: notreelog mount option
  Btrfs: introduce btrfs_show_options
  Btrfs: rework allocation clustering
  Btrfs: Optimize locking in btrfs_next_leaf()
  Btrfs: break up btrfs_search_slot into smaller pieces
  Btrfs: kill the pinned_mutex
  Btrfs: kill the block group alloc mutex
  Btrfs: clean up find_free_extent
  Btrfs: free space cache cleanups
  Btrfs: unplug in the async bio submission threads
  Btrfs: keep processing bios for a given bdev if our proc is batching
2009-04-03 15:14:44 -07:00
Linus Torvalds
8fe74cf053 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Remove two unneeded exports and make two symbols static in fs/mpage.c
  Cleanup after commit 585d3bc06f
  Trim includes of fdtable.h
  Don't crap into descriptor table in binfmt_som
  Trim includes in binfmt_elf
  Don't mess with descriptor table in load_elf_binary()
  Get rid of indirect include of fs_struct.h
  New helper - current_umask()
  check_unsafe_exec() doesn't care about signal handlers sharing
  New locking/refcounting for fs_struct
  Take fs_struct handling to new file (fs/fs_struct.c)
  Get rid of bumping fs_struct refcount in pivot_root(2)
  Kill unsharing fs_struct in __set_personality()
2009-04-02 21:09:10 -07:00
Stoyan Gaydarov
c293498be6 Btrfs: BUG to BUG_ON changes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 17:05:11 -04:00
Dan Carpenter
3e7ad38d20 Btrfs: remove dead code
Remove an unneeded return statement and conditional

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 16:46:06 -04:00
Dan Carpenter
ff0a5836ac Btrfs: remove dead code
merge is always NULL at this point.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 16:46:06 -04:00
Wu Fengguang
d4a789474a Btrfs: fix typos in comments
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 16:46:06 -04:00
Jim Owens
2e966ed22c Btrfs: remove unused ftrace include
Signed-off-by: jim owens <jowens@hp.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 17:02:55 -04:00
Heiko Carstens
93dbfad7ac Btrfs: fix __ucmpdi2 compile bug on 32 bit builds
We get this on 32 builds:

fs/built-in.o: In function `extent_fiemap':
(.text+0x1019f2): undefined reference to `__ucmpdi2'

Happens because of a switch statement with a 64 bit argument.
Convert this to an if statement to fix this.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03 10:33:45 -04:00