mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 06:31:52 +00:00
3b2d0bb5ef
693493 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Lorenzo Bianconi
|
8b35a5f87a |
iio: magnetometer: st_magn: remove ihl property for LSM303AGR
Remove IRQ active low support for LSM303AGR since the sensor does not
support that capability for data-ready line
Fixes:
|
||
|
Lorenzo Bianconi
|
541ee9b24f |
iio: magnetometer: st_magn: fix status register address for LSM303AGR
Fixes:
|
||
Srinivas Pandruvada
|
f1664eaace |
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Fabrice Gasnier
|
a359bb2a55 |
iio: trigger: stm32-timer: fix get trigger mode
Fix reading trigger mode, when other bit-fields are set. SMCR register
value must be masked to read SMS (slave mode selection) only.
Fixes:
|
||
Dragos Bogdan
|
fdd0d32eb9 |
iio: imu: adis16480: Fix acceleration scale factor for adis16480
According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Jonathan Corbet
|
f00fd7ae4f |
PATCH] iio: Fix some documentation warnings
The kerneldoc description for the trig_readonly field of struct iio_dev lacked a colon, leading to this doc build warning: ./include/linux/iio/iio.h:603: warning: No description found for parameter 'trig_readonly' A similar issue for iio_trigger_set_immutable() in trigger.h yielded: ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'indio_dev' ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'trig' Fix the formatting and silence the warnings. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Alexey Dobriyan
|
8fbbe2d7cc |
genirq/ipi: Fixup checks against nr_cpu_ids
Valid CPU ids are [0, nr_cpu_ids-1] inclusive. Fixes: |
||
Takashi Sakamoto
|
dbd7396b4f |
ALSA: firewire-motu: destroy stream data surely at failure of card initialization
When failing sound card registration after initializing stream data, this
module leaves allocated data in stream data. This commit fixes the bug.
Fixes:
|
||
|
Takashi Sakamoto
|
0c264af7be |
ALSA: firewire: fix NULL pointer dereference when releasing uninitialized data of iso-resource
When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: |
||
Aaron Ma
|
ec667683c5 |
Input: trackpoint - add new trackpoint firmware ID
Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
KT Liao
|
1d2226e450 |
Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN touchpads found in Lenovo Yoga310. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
Xin Long
|
4f8a881acc |
net: sched: fix NULL pointer dereference when action calls some targets
As we know in some target's checkentry it may dereference par.entryinfo
to check entry stuff inside. But when sched action calls xt_check_target,
par.entryinfo is set with NULL. It would cause kernel panic when calling
some targets.
It can be reproduce with:
# tc qd add dev eth1 ingress handle ffff:
# tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \
-j ECN --ecn-tcp-remove
It could also crash kernel when using target CLUSTERIP or TPROXY.
By now there's no proper value for par.entryinfo in ipt_init_target,
but it can not be set with NULL. This patch is to void all these
panics by setting it with an ipt_entry obj with all members = 0.
Note that this issue has been there since the very beginning.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
David Howells
|
9a19bad70c |
rxrpc: Fix oops when discarding a preallocated service call
rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call
it preallocates, but does add it to the rxrpc net namespace call list.
This, however, causes rxrpc_put_call() to oops when the call is discarded
when the socket is closed. rxrpc_put_call() needs the socket to be able to
reach the namespace so that it can use a lock held therein.
Fix this by setting a call's socket pointer immediately before discarding
it.
This can be triggered by unloading the kafs module, resulting in an oops
like the following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
IP: rxrpc_put_call+0x1e2/0x32d
PGD 0
P4D 0
Oops: 0000 [#1] SMP
Modules linked in: kafs(E-)
CPU: 3 PID: 3037 Comm: rmmod Tainted: G E 4.12.0-fscache+ #213
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8803fc92e2c0 task.stack: ffff8803fef74000
RIP: 0010:rxrpc_put_call+0x1e2/0x32d
RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f
RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88
RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20
R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005
R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee
FS: 00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0
Call Trace:
rxrpc_discard_prealloc+0x325/0x341
rxrpc_listen+0xf9/0x146
kernel_listen+0xb/0xd
afs_close_socket+0x3e/0x173 [kafs]
afs_exit+0x1f/0x57 [kafs]
SyS_delete_module+0x10f/0x19a
do_syscall_64+0x8a/0x149
entry_SYSCALL64_slow_path+0x25/0x25
Fixes:
|
||
Colin Ian King
|
b024d949a3 |
irda: do not leak initialized list.dev to userspace
list.dev has not been initialized and so the copy_to_user is copying
data from the stack back to user space which is a potential
information leak. Fix this ensuring all of list is initialized to
zero.
Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Huy Nguyen
|
ca3d89a3eb |
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
enable_4k_uar module parameter was added in patch cited below to
address the backward compatibility issue in SRIOV when the VM has
system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar
implementation.
The above compatibility issue does not exist in the non SRIOV case.
In this patch, we always enable 4k uar implementation if SRIOV
is not enabled on mlx4's supported cards.
Fixes:
|
||
Thierry Reding
|
b6f6d56c91 |
PCI: Allow PCI express root ports to find themselves
If the pci_find_pcie_root_port() function is called on a root port itself, return the root port rather than NULL. This effectively reverts commit |
||
Neal Cardwell
|
cdbeb633ca |
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
In some situations tcp_send_loss_probe() can realize that it's unable
to send a loss probe (TLP), and falls back to calling tcp_rearm_rto()
to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto()
realizes that the RTO was eligible to fire immediately or at some
point in the past (delta_us <= 0). Previously in such cases
tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now +
icsk_rto, which caused needless delays of hundreds of milliseconds
(and non-linear behavior that made reproducible testing
difficult). This commit changes the logic to schedule "overdue" RTOs
ASAP, rather than at now + icsk_rto.
Fixes:
|
||
Linus Torvalds
|
58d4e450a4 |
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes mm/vmalloc.c: don't unconditonally use __GFP_HIGHMEM mm/mempolicy: fix use after free when calling get_mempolicy mm/cma_debug.c: fix stack corruption due to sprintf usage signal: don't remove SIGNAL_UNKILLABLE for traced tasks. mm, oom: fix potential data corruption when oom_reaper races with writer mm: fix double mmap_sem unlock on MMF_UNSTABLE enforced SIGBUS slub: fix per memcg cache leak on css offline mm: discard memblock data later test_kmod: fix description for -s -and -c parameters kmod: fix wait on recursive loop wait: add wait_event_killable_timeout() kernel/watchdog: fix Kconfig constraints for perf hardlockup watchdog mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() |
||
Roopa Prabhu
|
bc3aae2bba |
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
Syzkaller hit 'general protection fault in fib_dump_info' bug on
commit 4.13-rc5..
Guilty file: net/ipv4/fib_semantics.c
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff880078562700 task.stack: ffff880078110000
RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314
RSP: 0018:ffff880078117010 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002
RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030
RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8
R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000
R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4
FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0
Call Trace:
inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766
rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217
netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397
rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
___sys_sendmsg+0x779/0x8d0 net/socket.c:2035
__sys_sendmsg+0xd1/0x170 net/socket.c:2069
SYSC_sendmsg net/socket.c:2080 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2076
entry_SYSCALL_64_fastpath+0x1a/0xa5
RIP: 0033:0x4512e9
RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX:
000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9
RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003
RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe
R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000
Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45
28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03
<0f>
b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44
RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP:
ffff880078117010
---[ end trace 254a7af28348f88b ]---
This patch adds a res->fi NULL check.
example run:
$ip route get 0.0.0.0 iif virt1-0
broadcast 0.0.0.0 dev lo
cache <local,brd> iif virt1-0
$ip route get 0.0.0.0 iif virt1-0 fibmatch
RTNETLINK answers: No route to host
Reported-by: idaifish <idaifish@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes:
|
||
Wei Wang
|
383143f31d |
ipv6: reset fn->rr_ptr when replacing route
syzcaller reported the following use-after-free issue in rt6_select():
BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8
BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8
Read of size 4 by task syz-executor1/439628
CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00
ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0
ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380
Call Trace:
[<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51
sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option.
Use struct sctp_sack_info instead
[<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158
[<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline]
[<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285
[<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline]
[<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325
[<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline]
[<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084
[<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203
[<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95
[<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223
[<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41
[<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224
[<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943
[<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079
[<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91
[<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline]
[<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272
[<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284
[<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564
[<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582
[<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563
[<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17
Object at ffff8800bc699380, in cache ip6_dst_cache size: 384
The root cause of it is that in fib6_add_rt2node(), when it replaces an
existing route with the new one, it does not update fn->rr_ptr.
This commit resets fn->rr_ptr to NULL when it points to a route which is
replaced in fib6_add_rt2node().
Fixes:
|
||
Charles Milette
|
f299aec6eb |
staging: rtl8188eu: add RNX-N150NUB support
Add support for USB Device Rosewill RNX-N150NUB. VendorID: 0x0bda, ProductID: 0xffef Signed-off-by: Charles Milette <charles.milette@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Alexander Potapenko
|
15339e441e |
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Eric Dumazet
|
5bfd37b4de |
tipc: fix use-after-free
syszkaller reported use-after-free in tipc [1] When msg->rep skb is freed, set the pointer to NULL, so that caller does not free it again. [1] ================================================================== BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466 Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115 CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 skb_push+0xd4/0xe0 net/core/skbuff.c:1466 tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9 RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76 R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651 __alloc_skb+0xf1/0x740 net/core/skbuff.c:219 alloc_skb include/linux/skbuff.h:903 [inline] tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148 tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:682 [inline] kfree_skb+0x165/0x4c0 net/core/skbuff.c:699 tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801c6e71dc0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 208 bytes inside of 224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0) The buggy address belongs to the page: page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Eric Dumazet
|
ff244c6b29 |
tun: handle register_netdevice() failures properly
syzkaller reported a double free [1], caused by the fact
that tun driver was not updated properly when priv_destructor
was added.
When/if register_netdevice() fails, priv_destructor() must have been
called already.
[1]
BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
CPU: 0 PID: 2919 Comm: syzkaller227220 Not tainted 4.13.0-rc4+ #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x7f/0x260 mm/kasan/report.c:252
kasan_report_double_free+0x55/0x80 mm/kasan/report.c:333
kasan_slab_free+0xa0/0xc0 mm/kasan/kasan.c:514
__cache_free mm/slab.c:3503 [inline]
kfree+0xd3/0x260 mm/slab.c:3820
selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
security_tun_dev_free_security+0x48/0x80 security/security.c:1512
tun_set_iff drivers/net/tun.c:1884 [inline]
__tun_chr_ioctl+0x2ce6/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x443ff9
RSP: 002b:00007ffc34271f68 EFLAGS: 00000217 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000443ff9
RDX: 0000000020533000 RSI: 00000000400454ca RDI: 0000000000000003
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401ce0
R13: 0000000000401d70 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 2919:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xaa/0xd0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x101/0x6f0 mm/slab.c:3627
kmalloc include/linux/slab.h:493 [inline]
kzalloc include/linux/slab.h:666 [inline]
selinux_tun_dev_alloc_security+0x49/0x170 security/selinux/hooks.c:5012
security_tun_dev_alloc_security+0x6d/0xa0 security/security.c:1506
tun_set_iff drivers/net/tun.c:1839 [inline]
__tun_chr_ioctl+0x1730/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 2919:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x6e/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kfree+0xd3/0x260 mm/slab.c:3820
selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
security_tun_dev_free_security+0x48/0x80 security/security.c:1512
tun_free_netdev+0x13b/0x1b0 drivers/net/tun.c:1563
register_netdevice+0x8d0/0xee0 net/core/dev.c:7605
tun_set_iff drivers/net/tun.c:1859 [inline]
__tun_chr_ioctl+0x1caf/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
The buggy address belongs to the object at ffff8801d2843b40
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 0 bytes inside of
32-byte region [ffff8801d2843b40, ffff8801d2843b60)
The buggy address belongs to the page:
page:ffffea000660cea8 count:1 mapcount:0 mapping:ffff8801d2843000 index:0xffff8801d2843fc1
flags: 0x200000000000100(slab)
raw: 0200000000000100 ffff8801d2843000 ffff8801d2843fc1 000000010000003f
raw: ffffea0006626a40 ffffea00066141a0 ffff8801dbc00100
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801d2843a00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
ffff8801d2843a80: 00 00 00 fc fc fc fc fc fb fb fb fb fc fc fc fc
>ffff8801d2843b00: 00 00 00 00 fc fc fc fc fb fb fb fb fc fc fc fc
^
ffff8801d2843b80: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
ffff8801d2843c00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
==================================================================
Fixes:
|
||
Kees Cook
|
c715b72c1b |
mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes
Moving the x86_64 and arm64 PIE base from 0x555555554000 to 0x000100000000 broke AddressSanitizer. This is a partial revert of: |
||
Laura Abbott
|
704b862f9e |
mm/vmalloc.c: don't unconditonally use __GFP_HIGHMEM
Commit |
||
zhong jiang
|
73223e4e2e |
mm/mempolicy: fix use after free when calling get_mempolicy
I hit a use after free issue when executing trinity and repoduced it
with KASAN enabled. The related call trace is as follows.
BUG: KASan: use after free in SyS_get_mempolicy+0x3c8/0x960 at addr ffff8801f582d766
Read of size 2 by task syz-executor1/798
INFO: Allocated in mpol_new.part.2+0x74/0x160 age=3 cpu=1 pid=799
__slab_alloc+0x768/0x970
kmem_cache_alloc+0x2e7/0x450
mpol_new.part.2+0x74/0x160
mpol_new+0x66/0x80
SyS_mbind+0x267/0x9f0
system_call_fastpath+0x16/0x1b
INFO: Freed in __mpol_put+0x2b/0x40 age=4 cpu=1 pid=799
__slab_free+0x495/0x8e0
kmem_cache_free+0x2f3/0x4c0
__mpol_put+0x2b/0x40
SyS_mbind+0x383/0x9f0
system_call_fastpath+0x16/0x1b
INFO: Slab 0xffffea0009cb8dc0 objects=23 used=8 fp=0xffff8801f582de40 flags=0x200000000004080
INFO: Object 0xffff8801f582d760 @offset=5984 fp=0xffff8801f582d600
Bytes b4 ffff8801f582d750: ae 01 ff ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
Object ffff8801f582d760: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8801f582d770: 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkk.
Redzone ffff8801f582d778: bb bb bb bb bb bb bb bb ........
Padding ffff8801f582d8b8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
Memory state around the buggy address:
ffff8801f582d600: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801f582d680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8801f582d700: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fc
!shared memory policy is not protected against parallel removal by other
thread which is normally protected by the mmap_sem. do_get_mempolicy,
however, drops the lock midway while we can still access it later.
Early premature up_read is a historical artifact from times when
put_user was called in this path see https://lwn.net/Articles/124754/
but that is gone since
|
||
Prakash Gupta
|
da094e4284 |
mm/cma_debug.c: fix stack corruption due to sprintf usage
name[] in cma_debugfs_add_one() can only accommodate 16 chars including
NULL to store sprintf output. It's common for cma device name to be
larger than 15 chars. This can cause stack corrpution. If the gcc
stack protector is turned on, this can cause a panic due to stack
corruption.
Below is one example trace:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in:
ffffff8e69a75730
Call trace:
dump_backtrace+0x0/0x2c4
show_stack+0x20/0x28
dump_stack+0xb8/0xf4
panic+0x154/0x2b0
print_tainted+0x0/0xc0
cma_debugfs_init+0x274/0x290
do_one_initcall+0x5c/0x168
kernel_init_freeable+0x1c8/0x280
Fix the short sprintf buffer in cma_debugfs_add_one() by using
scnprintf() instead of sprintf().
Link: http://lkml.kernel.org/r/1502446217-21840-1-git-send-email-guptap@codeaurora.org
Fixes:
|
||
Jamie Iles
|
eb61b5911b |
signal: don't remove SIGNAL_UNKILLABLE for traced tasks.
When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive faults, but this is undesirable when tracing. For example, debugging an init process (whether global or namespace), hitting a breakpoint and SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE. Everything continues fine, but then once debugging has finished, the init process is left killable which is unlikely what the user expects, resulting in either an accidentally killed init or an init that stops reaping zombies. Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
6b31d5955c |
mm, oom: fix potential data corruption when oom_reaper races with writer
Wenwei Tao has noticed that our current assumption that the oom victim
is dying and never doing any visible changes after it dies, and so the
oom_reaper can tear it down, is not entirely true.
__task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set
but do_group_exit sends SIGKILL to all threads _after_ the flag is set.
So there is a race window when some threads won't have
fatal_signal_pending while the oom_reaper could start unmapping the
address space. Moreover some paths might not check for fatal signals
before each PF/g-u-p/copy_from_user.
We already have a protection for oom_reaper vs. PF races by checking
MMF_UNSTABLE. This has been, however, checked only for kernel threads
(use_mm users) which can outlive the oom victim. A simple fix would be
to extend the current check in handle_mm_fault for all tasks but that
wouldn't be sufficient because the current check assumes that a kernel
thread would bail out after EFAULT from get_user*/copy_from_user and
never re-read the same address which would succeed because the PF path
has established page tables already. This seems to be the case for the
only existing use_mm user currently (virtio driver) but it is rather
fragile in general.
This is even more fragile in general for more complex paths such as
generic_perform_write which can re-read the same address more times
(e.g. iov_iter_copy_from_user_atomic to fail and then
iov_iter_fault_in_readable on retry).
Therefore we have to implement MMF_UNSTABLE protection in a robust way
and never make a potentially corrupted content visible. That requires
to hook deeper into the PF path and check for the flag _every time_
before a pte for anonymous memory is established (that means all
!VM_SHARED mappings).
The corruption can be triggered artificially
(http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp)
but there doesn't seem to be any real life bug report. The race window
should be quite tight to trigger most of the time.
Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org
Fixes:
|
||
|
Michal Hocko
|
5b53a6ea88 |
mm: fix double mmap_sem unlock on MMF_UNSTABLE enforced SIGBUS
Tetsuo Handa has noticed that MMF_UNSTABLE SIGBUS path in
handle_mm_fault causes a lockdep splat
Out of memory: Kill process 1056 (a.out) score 603 or sacrifice child
Killed process 1056 (a.out) total-vm:4268108kB, anon-rss:2246048kB, file-rss:0kB, shmem-rss:0kB
a.out (1169) used greatest stack depth: 11664 bytes left
DEBUG_LOCKS_WARN_ON(depth <= 0)
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1339 at kernel/locking/lockdep.c:3617 lock_release+0x172/0x1e0
CPU: 6 PID: 1339 Comm: a.out Not tainted 4.13.0-rc3-next-20170803+ #142
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
RIP: 0010:lock_release+0x172/0x1e0
Call Trace:
up_read+0x1a/0x40
__do_page_fault+0x28e/0x4c0
do_page_fault+0x30/0x80
page_fault+0x28/0x30
The reason is that the page fault path might have dropped the mmap_sem
and returned with VM_FAULT_RETRY. MMF_UNSTABLE check however rewrites
the error path to VM_FAULT_SIGBUS and we always expect mmap_sem taken in
that path. Fix this by taking mmap_sem when VM_FAULT_RETRY is held in
the MMF_UNSTABLE path.
We cannot simply add VM_FAULT_SIGBUS to the existing error code because
all arch specific page fault handlers and g-u-p would have to learn a
new error code combination.
Link: http://lkml.kernel.org/r/20170807113839.16695-2-mhocko@kernel.org
Fixes:
|
||
Vladimir Davydov
|
f6ba488073 |
slub: fix per memcg cache leak on css offline
To avoid a possible deadlock, sysfs_slab_remove() schedules an
asynchronous work to delete sysfs entries corresponding to the kmem
cache. To ensure the cache isn't freed before the work function is
called, it takes a reference to the cache kobject. The reference is
supposed to be released by the work function.
However, the work function (sysfs_slab_remove_workfn()) does nothing in
case the cache sysfs entry has already been deleted, leaking the kobject
and the corresponding cache.
This may happen on a per memcg cache destruction, because sysfs entries
of a per memcg cache are deleted on memcg offline if the cache is empty
(see __kmemcg_cache_deactivate()).
The kmemleak report looks like this:
unreferenced object 0xffff9f798a79f540 (size 32):
comm "kworker/1:4", pid 15416, jiffies 4307432429 (age 28687.554s)
hex dump (first 32 bytes):
6b 6d 61 6c 6c 6f 63 2d 31 36 28 31 35 39 39 3a kmalloc-16(1599:
6e 65 77 72 6f 6f 74 29 00 23 6b c0 ff ff ff ff newroot).#k.....
backtrace:
kmemleak_alloc+0x4a/0xa0
__kmalloc_track_caller+0x148/0x2c0
kvasprintf+0x66/0xd0
kasprintf+0x49/0x70
memcg_create_kmem_cache+0xe6/0x160
memcg_kmem_cache_create_func+0x20/0x110
process_one_work+0x205/0x5d0
worker_thread+0x4e/0x3a0
kthread+0x109/0x140
ret_from_fork+0x2a/0x40
unreferenced object 0xffff9f79b6136840 (size 416):
comm "kworker/1:4", pid 15416, jiffies 4307432429 (age 28687.573s)
hex dump (first 32 bytes):
40 fb 80 c2 3e 33 00 00 00 00 00 40 00 00 00 00 @...>3.....@....
00 00 00 00 00 00 00 00 10 00 00 00 10 00 00 00 ................
backtrace:
kmemleak_alloc+0x4a/0xa0
kmem_cache_alloc+0x128/0x280
create_cache+0x3b/0x1e0
memcg_create_kmem_cache+0x118/0x160
memcg_kmem_cache_create_func+0x20/0x110
process_one_work+0x205/0x5d0
worker_thread+0x4e/0x3a0
kthread+0x109/0x140
ret_from_fork+0x2a/0x40
Fix the leak by adding the missing call to kobject_put() to
sysfs_slab_remove_workfn().
Link: http://lkml.kernel.org/r/20170812181134.25027-1-vdavydov.dev@gmail.com
Fixes:
|
||
Pavel Tatashin
|
3010f87650 |
mm: discard memblock data later
There is existing use after free bug when deferred struct pages are
enabled:
The memblock_add() allocates memory for the memory array if more than
128 entries are needed. See comment in e820__memblock_setup():
* The bootstrap memblock region count maximum is 128 entries
* (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries
* than that - so allow memblock resizing.
This memblock memory is freed here:
free_low_memory_core_early()
We access the freed memblock.memory later in boot when deferred pages
are initialized in this path:
deferred_init_memmap()
for_each_mem_pfn_range()
__next_mem_pfn_range()
type = &memblock.memory;
One possible explanation for why this use-after-free hasn't been hit
before is that the limit of INIT_MEMBLOCK_REGIONS has never been
exceeded at least on systems where deferred struct pages were enabled.
Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128,
and verifying in qemu that this code is getting excuted and that the
freed pages are sane.
Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com
Fixes:
|
||
Luis R. Rodriguez
|
768dc4e484 |
test_kmod: fix description for -s -and -c parameters
The descriptions were reversed, correct this.
Link: http://lkml.kernel.org/r/20170809234635.13443-4-mcgrof@kernel.org
Fixes:
|
||
|
Luis R. Rodriguez
|
2ba293c9e7 |
kmod: fix wait on recursive loop
Recursive loops with module loading were previously handled in kmod by restricting the number of modprobe calls to 50 and if that limit was breached request_module() would return an error and a user would see the following on their kernel dmesg: request_module: runaway loop modprobe binfmt-464c Starting init:/sbin/init exists but couldn't execute it (error -8) This issue could happen for instance when a 64-bit kernel boots a 32-bit userspace on some architectures and has no 32-bit binary format hanlders. This is visible, for instance, when a CONFIG_MODULES enabled 64-bit MIPS kernel boots a into o32 root filesystem and the binfmt handler for o32 binaries is not built-in. After commit |
||
|
Luis R. Rodriguez
|
8ada92799e |
wait: add wait_event_killable_timeout()
These are the few pending fixes I have queued up for v4.13-final. One is a a generic regression fix for recursive loops on kmod and the other one is a trivial print out correction. During the v4.13 development we assumed that recursive kmod loops were no longer possible. Clearly that is not true. The regression fix makes use of a new killable wait. We use a killable wait to be paranoid in how signals might be sent to modprobe and only accept a proper SIGKILL. The signal will only be available to userspace to issue *iff* a thread has already entered a wait state, and that happens only if we've already throttled after 50 kmod threads have been hit. Note that although it may seem excessive to trigger a failure afer 5 seconds if all kmod thread remain busy, prior to the series of changes that went into v4.13 we would actually *always* fatally fail any request which came in if the limit was already reached. The new waiting implemented in v4.13 actually gives us *more* breathing room -- the wait for 5 seconds is a wait for *any* kmod thread to finish. We give up and fail *iff* no kmod thread has finished and they're *all* running straight for 5 consecutive seconds. If 50 kmod threads are running consecutively for 5 seconds something else must be really bad. Recursive loops with kmod are bad but they're also hard to implement properly as a selftest without currently fooling current userspace tools like kmod [1]. For instance kmod will complain when you run depmod if it finds a recursive loop with symbol dependency between modules as such this type of recursive loop cannot go upstream as the modules_install target will fail after running depmod. These tests already exist on userspace kmod upstream though (refer to the testsuite/module-playground/mod-loop-*.c files). The same is not true if request_module() is used though, or worst if aliases are used. Likewise the issue with 64-bit kernels booting 32-bit userspace without a binfmt handler built-in is also currently not detected and proactively avoided by userspace kmod tools, or kconfig for all architectures. Although we could complain in the kernel when some of these individual recursive issues creep up, proactively avoiding these situations in userspace at build time is what we should keep striving for. Lastly, since recursive loops could happen with kmod it may mean recursive loops may also be possible with other kernel usermode helpers, this should be investigated and long term if we can come up with a more sensible generic solution even better! [0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=20170809-kmod-for-v4.13-final [1] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git This patch (of 3): This wait is similar to wait_event_interruptible_timeout() but only accepts SIGKILL interrupt signal. Other signals are ignored. Link: http://lkml.kernel.org/r/20170809234635.13443-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Matt Redfearn <matt.redfearn@imgetc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nicholas Piggin
|
92e5aae457 |
kernel/watchdog: fix Kconfig constraints for perf hardlockup watchdog
Commit |
||
Johannes Weiner
|
739f79fc9d |
mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback()
Jaegeuk and Brad report a NULL pointer crash when writeback ending tries
to update the memcg stats:
BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0
IP: test_clear_page_writeback+0x12e/0x2c0
[...]
RIP: 0010:test_clear_page_writeback+0x12e/0x2c0
Call Trace:
<IRQ>
end_page_writeback+0x47/0x70
f2fs_write_end_io+0x76/0x180 [f2fs]
bio_endio+0x9f/0x120
blk_update_request+0xa8/0x2f0
scsi_end_request+0x39/0x1d0
scsi_io_completion+0x211/0x690
scsi_finish_command+0xd9/0x120
scsi_softirq_done+0x127/0x150
__blk_mq_complete_request_remote+0x13/0x20
flush_smp_call_function_queue+0x56/0x110
generic_smp_call_function_single_interrupt+0x13/0x30
smp_call_function_single_interrupt+0x27/0x40
call_function_single_interrupt+0x89/0x90
RIP: 0010:native_safe_halt+0x6/0x10
(gdb) l *(test_clear_page_writeback+0x12e)
0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619).
614 mod_node_page_state(page_pgdat(page), idx, val);
615 if (mem_cgroup_disabled() || !page->mem_cgroup)
616 return;
617 mod_memcg_state(page->mem_cgroup, idx, val);
618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)];
619 this_cpu_add(pn->lruvec_stat->count[idx], val);
620 }
621
622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
623 gfp_t gfp_mask,
The issue is that writeback doesn't hold a page reference and the page
might get freed after PG_writeback is cleared (and the mapping is
unlocked) in test_clear_page_writeback(). The stat functions looking up
the page's node or zone are safe, as those attributes are static across
allocation and free cycles. But page->mem_cgroup is not, and it will
get cleared if we race with truncation or migration.
It appears this race window has been around for a while, but less likely
to trigger when the memcg stats were updated first thing after
PG_writeback is cleared. Recent changes reshuffled this code to update
the global node stats before the memcg ones, though, stretching the race
window out to an extent where people can reproduce the problem.
Update test_clear_page_writeback() to look up and pin page->mem_cgroup
before clearing PG_writeback, then not use that pointer afterward. It
is a partial revert of
|
||
Matthew Dawson
|
a0917e0bc6 |
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
Due to commit
|
||
|
Linus Torvalds
|
cc28fcdc01 |
Changes since last time:
- Don't leak resources when mount fails - Don't accidentally clobber variables when looking for free inodes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJZlfFsAAoJEPh/dxk0SrTrTmQP/1Yga+FXQ1vjsyi0SyPRupwd 6beHGDEyLSmYaZKqye8v/nJlNVT8nmJofM20Hyu04f41K4oShQrzrI7jOOscOaYY jGEpgbx9fpLPD7AupgDvEDcrZyzZD/j3XxoSsOEGe5D6m3t2X0B4RtHz3jtj2s3e wkaBTE7GpzwrhC+9L+3AAtlpNlwkbjcCz0Wfrqlo8DjvRHTlutbYF51fthLJACtz U5XgNlxrjQlxGxn4IRHEqxmxWKz2iF4aQHGIX8OEGyt8J3YEO2t3K+nSalWduiBc mynExqVFIdGddNWoW4au6IKkPEahytsPVAiyt1TQMNvgkOMCO6DfUz+WmyQbd483 2r/xUbMdP78RQsUDXdrIEcTiHs/GEfQmIxUongf/0au3r2wmpQfbqzQuBxhuVbzW 1tQQsDKrO3r+GeEEoBPehtWVF/QPlQvlpT6pfft69kcgp5ukPDvOyOoM0ZEbKy72 zBWEs5O/kHUOBBXXdV2cqazplq3LyLuBMok1y+gUXXOyXfEd2w9LPqmoK3RmqSQ2 FnZc2A6tjko1NDLrSkq/uYRXIGi7ZAfxzqhP0L6XLUnu+kjN/A2Xb6pdfB9Wngl2 8nLVbBL/d28lMVPLJ5M3yxoVcQbIfcNqNA5QmWVCmPUqEwgMQFCsbBdYMKILI0ok B76xb0VyZBP5l9QJ514S =vJe/ -----END PGP SIGNATURE----- Merge tag 'xfs-4.13-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: "A handful more bug fixes for you today. Changes since last time: - Don't leak resources when mount fails - Don't accidentally clobber variables when looking for free inodes" * tag 'xfs-4.13-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: don't leak quotacheck dquots when cow recovery xfs: clear MS_ACTIVE after finishing log recovery iomap: fix integer truncation issues in the zeroing and dirtying helpers xfs: fix inobt inode allocation search optimization |
||
|
Linus Torvalds
|
70bfc741f8 |
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A small set of fixes that should go into this release. This contains:
- An NVMe pull request from Christoph, with a few select fixes.
One of them fix a polling regression in this series, in which it's
trivial to cause the kernel to disable most of the hardware queue
interrupts.
- Fixup for a blk-mq queue usage imbalance on request allocation,
from Keith.
- A xen block pull request from Konrad, fixing two issues with
xen/xen-blkfront"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-pci: add a fallback when pci_irq_get_affinity returns NULL
nvme-pci: set cqe_seen on polled completions
nvme-fabrics: fix reporting of unrecognized options
nvmet-fc: eliminate incorrect static markers on local variables
nvmet-fc: correct use after free on list teardown
nvmet: don't overwrite identify sn/fr with 0-bytes
xen-blkfront: use a right index when checking requests
xen: fix bio vec merging
blk-mq: Fix queue usage on failed request allocation
|
||
|
Linus Torvalds
|
edb20a1b4a |
Fourth set of -rc fixes for 4.13 cycle
- Set of 5 i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by creating
a new function and using it where needed instead of just patching up a
few lines...a smaller fix could probably be done, but the larger fix
is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't actually
happen, I expect a patch to remove this from all drivers that share
this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes
-----BEGIN PGP SIGNATURE-----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=84Ve
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Fourth set of -rc fixes for 4.13 cycle. This is all of the -rc fixes
that we know of. I suspect this will be the last rc pull request, but
you never know, I could be wrong.
Nothing major here. There are the i40iw patches I mentioned in my last
pull request minus one that I pulled out because it wasn't a fix and
not appropriate for the rc cycle. Then a few other items trickled in
and were added to the pull request. It's fairly small aside from those
five i40iw patches
- Set of five i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by
creating a new function and using it where needed instead of just
patching up a few lines...a smaller fix could probably be done, but
the larger fix is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't
actually happen, I expect a patch to remove this from all drivers
that share this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/uverbs: Fix NULL pointer dereference during device removal
IB/core: Protect sysfs entry on ib_unregister_device
iw_cxgb4: fix misuse of integer variable
IB/hns: fix memory leak on ah on error return path
i40iw: Fix potential fcn_id_array out of bounds
i40iw: Use correct alignment for CQ0 memory
i40iw: Fix typecast of tcp_seq_num
i40iw: Correct variable names
i40iw: Fix parsing of query/commit FPM buffers
RDMA/vmw_pvrdma: Report CQ missed events
|
||
|
Linus Torvalds
|
039a8e3847 |
powerpc fixes for 4.13 #7
A bug in the VSX register saving that could cause userspace FP/VMX register corruption. Never seen to happen (that we know of), was found by code inspection, but still tagged for stable given the consequences. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZlt/PAAoJEFHr6jzI4aWAHW8P/iKMN08HDpvG49xRlhzxlVxA blHw5HPBcnBO4wiVO5Imi5uryj59erPmD49fbvnoS8iYeJjLw6VitRV4UCOm0Ssx 1oprF4xkaahtd4TJmbdf8WIz5H5NlYhpw5CXV1PRdP0X9r64MLIgZihYCdCWqGzN GLVTHtbIuNewJTN8IbLkmEdhAThtriBwFVUxrNOQ3JLqUPWAWO5qKeKgaPeeBLlw LJ4Q7TbdHgXZa/QEW2RmB+IfFcew4WVf/7+4ZgHjMhtSsIGrgqEE2680SGNY/rNY kXqR/g0l/GbQUjWFDDlveeJY5W0RenD/L4VodjS0ODMop9ZB+0LcRV0qUR7vDvmU 7xi571hBPpskVsPH1sUahwJtaWAYkf5JqROLVryAYDBNcqnlohk4HdWltigT7asi GyHvJ32MWzmCDc0obEskQtqNlbIyRDy2qoTtl8O4YnWWf5nASKGyiRJlvLyLlADK 2g64jP7vppfRM5cskZ3JkQ1NH3ORzVgwfGUNWaAZW4jCE8XeqXQnPtGsWvqqQJOd 1UmxNHjtjc0TlMmxNp0EjGjpRXj8eerzDXv0ecRH/xqo376Ies99uGo/vs+htjrp HQ+wjOZxRk/jB0KBOoNbTkM6FY04I/ZIvIwJWboyEHzqctwj1pA63I+bzRbzBxww TLP2TDPIKiwTVbHcb6XP =jIDJ -----END PGP SIGNATURE----- Merge tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A bug in the VSX register saving that could cause userspace FP/VMX register corruption. Never seen to happen (that we know of), was found by code inspection, but still tagged for stable given the consequences" * tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC |
||
|
Linus Torvalds
|
4283346802 |
ARM: SoC fixes for 4.13
A small number of bugfixes, nothing serious this time.
Here is a full list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for device
repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAWZbAq2CrR//JCVInAQLM6xAAg6Z061j2pQn9J8+AJH6NlhNvZg6dhGmp
mtIWs77lXgghqQU7LZrxGXNpqxpY+p3XD5F4EWl1LLZ+USIXjYZdPPnZobTClmeX
9+z3PbiHTqmSVfxh+hwE/6Cwg1poqYhFn0tAmOstPBJ8+H3cZONwqGMeCrc2WguX
v9AFnayisBZOnKz7zgpszthSGqovASSPpw/4VY7TwRO1fIFd9/2H0ZW3pd7alD7+
yD0XO04OEqKKAmd1DT6kAX3E+E+oqqTvMgBUOYiYVIveokk1ONpJMeumjEqZng9w
NAgDfT0in5hDWfl3eQ83CawgT4hUxOXqcC3nY6tEcrFO/qcMIW5TDM0YD7zqDKGN
o0fELOdsW0hew7ceNNd/zjJVD4WXlxqcIAS0A/buhIvpFWr3ruA4DhycKw5L5wlw
3XEQwxDGnBsEF6ZGeqIrLc6LpOLH3i6TWTskyig1AZxymjP5coo4mR36vKh3zKfS
E0O/zLdkKpnaV8V5N9Ln26PGpL4JKSuAxy59mlEZ4VSR/FfCZTm+R6/w6NeY2noU
DVMzso6WeOMLBkGFATSZ/D0MuRimBYoBGdC1wlinHGXmPqMBjkbwASmJakIRQdBV
ifBw3pBQMEiLygyIV16KY/zAtI0waEwn61h0jGDoHA1FX3nHkSmpEjqSvG7nXJpF
0wqpFPu93H0=
=9Xbk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, nothing serious this time. Here is a full
list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete
patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for
device repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: ti: ti_sci_pm_domains: Populate name for genpd
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
|
||
|
Linus Torvalds
|
cb247857f3 |
sound fixes for 4.13-rc6
A collection of small fixes, mostly for regression fixes (sequencer kconfig and emu10k1 probe) and device-specific quirks (three for USB and one for HD-audio). One significant change is a fix for races in ALSA sequencer core, which covers over the previous incomplete fix. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlmWrtUOHHRpd2FpQHN1 c2UuZGUACgkQbDGAVD0pKaT0qhAAteVfBfb18wm4HCq6yYZtiD62bB62+/6uaNXA iCt7YK3FTkZHkzPvtyPprAq0N6+2H6/278nwf93EGdnNVWHjPn6BdRSFX7NHqNHh uqKt0/qIuwL0r+caUuRPH8vOcasMnRMg1g95hLtfOpQGXbiNVn7CmV7jeaLZDizh BUvHeuxwS5OxUPo8bxz/4DzxeXNa24qFVErYrJb6w5AJ4g5wc4vWULrqbSOB4Pn7 BuxaAl0dc2IfqDOFb+hlXM2YCDp2Ob3CwClX4vYUIkvAP2TDYeCIqtPHJvSpYJU9 Cxlf2bxDwAoOXh26k4twD4u+ryRxXft4bxzhL3XGQRm93pGyYHnPT6tqxkuMlf5f xS6i2p822aE69FszDQTWWqNWx+LZOFkXdpX4YJKRRM3wIRw/sl+OYNGxEPG74XUE sEfFM9A+8e2uds2JZCRpUS++agFpamei1L8y9Ao1COcCtfrlQzHCSlkptP08QBff ULaIWwcV4SRp2Dl2ewIgiJLroZHBDX/t93fnewnlnqdbNWoqK6t6foMe8xfPqA32 ejnvMtXQPRGMJYEiQdzHtwNiHGohs3ibDfKJmAx7Me6gDZzm3JEEmcZ9Hw48Pe0c HYfMXweZ8tRQF2uL96Qf6kcTwy0SSyXZfyYcrU5MedZSld44Y4xeR6mcdpXzKY8N TdAgyR0= =9p9K -----END PGP SIGNATURE----- Merge tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly for regression fixes (sequencer kconfig and emu10k1 probe) and device-specific quirks (three for USB and one for HD-audio). One significant change is a fix for races in ALSA sequencer core, which covers over the previous incomplete fix" * tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: emu10k1: Fix forgotten user-copy conversion in init code ALSA: usb-audio: add DSD support for new Amanero PID ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset ALSA: seq: 2nd attempt at fixing race creating a queue ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370 ALSA: seq: Fix CONFIG_SND_SEQ_MIDI dependency |
||
Daniel Borkmann
|
2110ba5830 |
bpf, doc: improve sysctl knob description
Current context speaking of tcpdump filters is out of date these days, so lets improve the sysctl description for the BPF knobs a bit. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Colin Ian King
|
a120d9ab65 |
netxen: fix incorrect loop counter decrement
The loop counter k is currently being decremented from zero which
is incorrect. Fix this by incrementing k instead
Detected by CoverityScan, CID#401847 ("Infinite loop")
Fixes:
|
||
|
Linus Torvalds
|
4478976a43 |
Another dma-mapping regression fix.
-----BEGIN PGP SIGNATURE----- iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlmWl+sLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYM8hA/8DBrMtqyMF6RqwUz7Nsk2sfdvykkniL3MqFm2hBpy wjoBRs3RwclpH3SJyBJjf0ktyhsxYHB2TXnnbdQU8G/MTNm28GQTOv37o5/JxJgJ XQwlJu3c5HdtaKyuCO7vNG8wXR8ZQ2qmjhWPHWaqfi6wfCfBJbpX30btZEKU7SXS 3kmuqpRzmdkJFm6yKFckiGexsdUvEWMbFGhFobyyaAZOa7/+vK0+5jv+cGvxqhTT pUlZjkenF8uYm9tw7QXDaN6wKmKmhHG50dK6oXwaXxaDKlzFShsfogekQjvdEtvJ 7CRLxqRzUY2QXYKgxDVA/bQwS9WkJhPXGRf837R+H4Swfz/XBE4TqMgvvldModnU w9kol0TRkx35val8wF02kvYuhCgxN8r1PSf/4m5JMIJKzk3toNV9uEKxggKC0Q5s Kgq6AXP2rdTzUXcENlX0apXYTs2EkEB9V/MOFrxz+IQWgTD+WQzyw9WV/QNQxcMO cELtaogDvg7h/jyrfatZYySj0zU08KF6Sy7lMPhn2rlGrNGhSgEsKC6oHkC+SAuW J6BcqIG/bvs+/09ksBj1iG0JGvzq93WF6M45mc52bP/Rma+2CmQgbBFI02WKbJhW idXZRciEtaIJZaEkE/aoVbcwcMMvtewdz+qqfAdOvNt61m1Gdc7J52zkMMvRFFly 3kY= =HO0/ -----END PGP SIGNATURE----- Merge tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: "Another dma-mapping regression fix" * tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping: of: fix DMA mask generation |
||
|
Colin Ian King
|
eac2c68d66 |
nfp: fix infinite loop on umapping cleanup
The while loop that performs the dma page unmapping never decrements
index counter f and hence loops forever. Fix this with a pre-decrement
on f.
Detected by CoverityScan, CID#1357309 ("Infinite loop")
Fixes:
|
||
Jiri Pirko
|
acc8b31665 |
net: sched: fix p_filter_chain check in tcf_chain_flush
The dereference before check is wrong and leads to an oops when
p_filter_chain is NULL. The check needs to be done on the pointer to
prevent NULL dereference.
Fixes:
|