Need to translate uid and gid in case of chown(2).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If idmap == NULL *and* filesystem daemon declared idmapped mounts
support, then uid/gid values in a fuse header will be -1.
No functional changes intended.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Virtiofs has its own queuing mechanism, but still requests are first queued
on fiq->pending to be immediately dequeued and queued onto the virtio
queue.
The queuing on fiq->pending is unnecessary and might even have some
performance impact due to being a contention point.
Forget requests are handled similarly.
Move the queuing of requests and forgets into the fiq->ops->*.
fuse_iqueue_ops are renamed to reflect the new semantics.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Tested-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d8026 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZfLjeQAKCRDh3BK/laaZ
PBYQAQDqYZzq91Kn5jdvjaSd+6I/+x7MDLOIP5hPX0HJLuBxWAEAqENoo4Of0GTC
ltW7DKrQy9E3CMp6VKSLVJPN4BYP9gk=
=GvOE
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add passthrough mode for regular file I/O.
This allows performing read and write (also via memory maps) on a
backing file without incurring the overhead of roundtrips to
userspace. For now this is only allowed to privileged servers, but
this limitation will go away in the future (Amir Goldstein)
- Fix interaction of direct I/O mode with memory maps (Bernd Schubert)
- Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)
- Allow resending queued requests for server crash recovery (Zhao Chen)
- Misc fixes and cleanups
* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
fuse: get rid of ff->readdir.lock
fuse: remove unneeded lock which protecting update of congestion_threshold
fuse: Fix missing FOLL_PIN for direct-io
fuse: remove an unnecessary if statement
fuse: Track process write operations in both direct and writethrough modes
fuse: Use the high bit of request ID for indicating resend requests
fuse: Introduce a new notification type for resend pending requests
fuse: add support for explicit export disabling
fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
fuse: fix typo for fuse_permission comment
fuse: Convert fuse_writepage_locked to take a folio
fuse: Remove fuse_writepage
virtio_fs: remove duplicate check if queue is broken
fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
fuse: don't unhash root
fuse: fix root lookup with nonzero generation
fuse: replace remaining make_bad_inode() with fuse_make_bad()
virtiofs: drop __exit from virtio_fs_sysfs_exit()
fuse: implement passthrough for mmap
fuse: implement splice read/write passthrough
...
The same protection is provided by file->f_pos_lock.
Note, this relies on the fact that file->f_mode has FMODE_ATOMIC_POS.
This flag is cleared by stream_open(), which would prevent locking of
f_pos_lock.
Prior to commit 7de64d521b ("fuse: break up fuse_open_common()")
FOPEN_STREAM on a directory would cause stream_open() to be called.
After this commit this is not done anymore, so f_pos_lock will always
be locked.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Our user space filesystem relies on fuse to provide POSIX interface.
In our test, a known string is written into a file and the content
is read back later to verify correct data returned. We observed wrong
data returned in read buffer in rare cases although correct data are
stored in our filesystem.
Fuse kernel module calls iov_iter_get_pages2() to get the physical
pages of the user-space read buffer passed in read(). The pages are
not pinned to avoid page migration. When page migration occurs, the
consequence are two-folds.
1) Applications do not receive correct data in read buffer.
2) fuse kernel writes data into a wrong place.
Using iov_iter_extract_pages() to pin pages fixes the issue in our
test.
An auxiliary variable "struct page **pt_pages" is used in the patch
to prepare the 2nd parameter for iov_iter_extract_pages() since
iov_iter_get_pages2() uses a different type for the 2nd parameter.
[SzM] add iov_iter_extract_will_pin(ii) and unpin only if true.
Signed-off-by: Lei Huang <lei.huang@linux.intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The root inode is assumed to be always hashed. Do not unhash the root
inode even if it is marked BAD.
Fixes: 5d069dbe8a ("fuse: fix bad inode")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An mmap request for a file open in passthrough mode, maps the memory
directly to the backing file.
An mmap of a file in direct io mode, usually uses cached mmap and puts
the inode in caching io mode, which denies new passthrough opens of that
inode, because caching io mode is conflicting with passthrough io mode.
For the same reason, trying to mmap a direct io file, while there is
a passthrough file open on the same inode will fail with -ENODEV.
An mmap of a file in direct io mode, also needs to wait for parallel
dio writes in-progress to complete.
If a passthrough file is opened, while an mmap of another direct io
file is waiting for parallel dio writes to complete, the wait is aborted
and mmap fails with -ENODEV.
A FUSE server that uses passthrough and direct io opens on the same inode
that may also be mmaped, is advised to provide a backing fd also for the
files that are open in direct io mode (i.e. use the flags combination
FOPEN_DIRECT_IO | FOPEN_PASSTHROUGH), so that mmap will always use the
backing file, even if read/write do not passthrough.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This allows passing fstests generic/249 and generic/591.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the backing file read/write helpers to implement read/write
passthrough to a backing file.
After read/write, we invalidate a/c/mtime/size attributes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
After getting a backing file id with FUSE_DEV_IOC_BACKING_OPEN ioctl,
a FUSE server can reply to an OPEN request with flag FOPEN_PASSTHROUGH
and the backing file id.
The FUSE server should reuse the same backing file id for all the open
replies of the same FUSE inode and open will fail (with -EIO) if a the
server attempts to open the same inode with conflicting io modes or to
setup passthrough to two different backing files for the same FUSE inode.
Using the same backing file id for several different inodes is allowed.
Opening a new file with FOPEN_DIRECT_IO for an inode that is already
open for passthrough is allowed, but only if the FOPEN_PASSTHROUGH flag
and correct backing file id are specified as well.
The read/write IO of such files will not use passthrough operations to
the backing file, but mmap, which does not support direct_io, will use
the backing file insead of using the page cache as it always did.
Even though all FUSE passthrough files of the same inode use the same
backing file as a backing inode reference, each FUSE file opens a unique
instance of a backing_file object to store the FUSE path that was used
to open the inode and the open flags of the specific open file.
The per-file, backing_file object is released along with the FUSE file.
The inode associated fuse_backing object is released when the last FUSE
passthrough file of that inode is released AND when the backing file id
is closed by the server using the FUSE_DEV_IOC_BACKING_CLOSE ioctl.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In preparation for opening file in passthrough mode, store the
fuse_open_out argument in ff->args to be passed into fuse_file_io_open()
with the optional backing_id member.
This will be used for setting up passthrough to backing file on open
reply with FOPEN_PASSTHROUGH flag and a valid backing_id.
Opening a file in passthrough mode may fail for several reasons, such as
missing capability, conflicting open flags or inode in caching mode.
Return EIO from fuse_file_io_open() in those cases.
The combination of FOPEN_PASSTHROUGH and FOPEN_DIRECT_IO is allowed -
it mean that read/write operations will go directly to the server,
but mmap will be done to the backing file.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE server calls the FUSE_DEV_IOC_BACKING_OPEN ioctl with a backing file
descriptor. If the call succeeds, a backing file identifier is returned.
A later change will be using this backing file id in a reply to OPEN
request with the flag FOPEN_PASSTHROUGH to setup passthrough of file
operations on the open FUSE file to the backing file.
The FUSE server should call FUSE_DEV_IOC_BACKING_CLOSE ioctl to close the
backing file by its id.
This can be done at any time, but if an open reply with FOPEN_PASSTHROUGH
flag is still in progress, the open may fail if the backing file is
closed before the fuse file was opened.
Setting up backing files requires a server with CAP_SYS_ADMIN privileges.
For the backing file to be successfully setup, the backing file must
implement both read_iter and write_iter file operations.
The limitation on the level of filesystem stacking allowed for the
backing file is enforced before setting up the backing file.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
FUSE_PASSTHROUGH capability to passthrough FUSE operations to backing
files will be made available with kernel config CONFIG_FUSE_PASSTHROUGH.
When requesting FUSE_PASSTHROUGH, userspace needs to specify the
max_stack_depth that is allowed for FUSE on top of backing files.
Introduce the flag FOPEN_PASSTHROUGH and backing_id to fuse_open_out
argument that can be used when replying to OPEN request, to setup
passthrough of io operations on the fuse inode to a backing file.
Introduce a refcounted fuse_backing object that will be used to
associate an open backing file with a fuse inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of denying caching mode on parallel dio open, deny caching
open only while parallel dio are in-progress and wait for in-progress
parallel dio writes before entering inode caching io mode.
This allows executing parallel dio when inode is not in caching mode
even if shared mmap is allowed, but no mmaps have been performed on
the inode in question.
An mmap on direct_io file now waits for all in-progress parallel dio
writes to complete, so parallel dio writes together with
FUSE_DIRECT_IO_ALLOW_MMAP is enabled by this commit.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The fuse inode io mode is determined by the mode of its open files/mmaps
and parallel dio opens and expressed in the value of fi->iocachectr:
> 0 - caching io: files open in caching mode or mmap on direct_io file
< 0 - parallel dio: direct io mode with parallel dio writes enabled
== 0 - direct io: no files open in caching mode and no files mmaped
Note that iocachectr value of 0 might become positive or negative,
while non-parallel dio is getting processed.
direct_io mmap uses page cache, so first mmap will mark the file as
ff->io_opened and increment fi->iocachectr to enter the caching io mode.
If the server opens the file in caching mode while it is already open
for parallel dio or vice versa the open fails.
This allows executing parallel dio when inode is not in caching mode
and no mmaps have been performed on the inode in question.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In preparation for inode io modes, a server open response could fail due to
conflicting inode io modes.
Allow returning an error from fuse_finish_open() and handle the error in
the callers.
fuse_finish_open() is used as the callback of finish_open(), so that
FMODE_OPENED will not be set if fuse_finish_open() fails.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_open_common() has a lot of code relevant only for regular files and
O_TRUNC in particular.
Copy the little bit of remaining code into fuse_dir_open() and stop using
this common helper for directory open.
Also split out fuse_dir_finish_open() from fuse_finish_open() before we add
inode io modes to fuse_finish_open().
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This removed the need to pass isdir argument to fuse_put_file().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent. Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.
Trouble arises when the submount's parent is evicted despite the
submount itself being in use. In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation. When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.
Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount. When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 1866d779d5 ("fuse: Allow fuse_fill_super_common() for submounts")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.
Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.
[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.
Signed-off-by: Tyler Fanelli <tfanelli@redhat.com>
Fixes: e78662e818 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Not all inode attributes are supported by all filesystems, but for the
basic stats (which are returned by stat(2) and friends) all of them will
have some value, even if that doesn't reflect a real attribute of the file.
Btime is different, in that filesystems are free to report or not report a
value in statx. If the value is available, then STATX_BTIME bit is set in
stx_mask.
When caching the value of btime, remember the availability of the attribute
as well as the value (if available). This is done by using the
FUSE_I_BTIME bit in fuse_inode->state to indicate availability, while using
fuse_inode->inval_mask & STATX_BTIME to indicate the state of the cache
itself (i.e. set if cache is invalid, and cleared if cache is valid).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow querying btime. When btime is requested in mask, then FUSE_STATX
request is sent. Otherwise keep using FUSE_GETATTR.
The userspace interface for statx matches that of the statx(2) API.
However there are limitations on how this interface is used:
- returned basic stats and btime are used, stx_attributes, etc. are
ignored
- always query basic stats and btime, regardless of what was requested
- requested sync type is ignored, the default is passed to the server
- if server returns with some attributes missing from the result_mask,
then no attributes will be cached
- btime is not cached yet (next patch will fix that)
For new inodes initialize fi->inval_mask to "all invalid", instead of "all
valid" as previously. Also only clear basic stats from inval_mask when
caching attributes. This will result in the caching logic not thinking
that btime is cached.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Next patch will introduce yet another type attribute reply. Add a macro
that can handle attribute timeouts for all of the structs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FOPEN_DIRECT_IO is usually set by fuse daemon to indicate need of strong
coherency, e.g. network filesystems. Thus shared mmap is disabled since it
leverages page cache and may write to it, which may cause inconsistence.
But FOPEN_DIRECT_IO can be used not for coherency but to reduce memory
footprint as well, e.g. reduce guest memory usage with virtiofs.
Therefore, add a new fuse init flag FUSE_DIRECT_IO_RELAX to relax
restrictions in that mode, currently, it allows shared mmap. One thing to
note is to make sure it doesn't break coherency in your use case.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY/ysqAAKCRDh3BK/laaZ
PLSfAP9c4z/KOZj/Am8nQ0mqI8Ss0Ei+hyu8Vow6NoyJkR4NvwD/SxEeI2+rpXj7
TGOA+6k4chLc7QIFBsIwGvQgeXld1gA=
=s4b/
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix regression in fileattr permission checking
- Fix possible hang during PID namespace destruction
- Add generic support for request extensions
- Add supplementary group list extension
- Add limited support for supplying supplementary groups in create
requests
- Documentation fixes
* tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add inode/permission checks to fileattr_get/fileattr_set
fuse: fix all W=1 kernel-doc warnings
fuse: in fuse_flush only wait if someone wants the return code
fuse: optional supplementary group in create requests
fuse: add request extension
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
Permission to create an object (create, mkdir, symlink, mknod) needs to
take supplementary groups into account.
Add a supplementary group request extension. This can contain an arbitrary
number of group IDs and can be added to any request. This extension is not
added to any request by default.
Add FUSE_CREATE_SUPP_GROUP init flag to enable supplementary group info in
creation requests. This adds just a single supplementary group that
matches the parent group in the case described above. In other cases the
extension is not added.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main request. It has a header indicating the size and type
of the extension.
The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.
Add the total extension length to the request header. The offset of the
extension block within the request can be calculated by:
inh->len - inh->total_extlen * 8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This cycle we ported all filesystems to the new posix acl api. While
looking at further simplifications in this area to remove the last
remnants of the generic dummy posix acl handlers we realized that we
regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use
of posix acls.
With the change to a dedicated posix acl api interacting with posix acls
doesn't go through the old xattr codepaths anymore and instead only
relies the get acl and set acl inode operations.
Before this change fuse daemons that don't set FUSE_POSIX_ACL were able
to get and set posix acl albeit with two caveats. First, that posix acls
aren't cached. And second, that they aren't used for permission checking
in the vfs.
We regressed that use-case as we currently refuse to retrieve any posix
acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons
would see a change in behavior.
We can restore the old behavior in multiple ways. We could change the
new posix acl api and look for a dedicated xattr handler and if we find
one prefer that over the dedicated posix acl api. That would break the
consistency of the new posix acl api so we would very much prefer not to
do that.
We could introduce a new ACL_*_CACHE sentinel that would instruct the
vfs permission checking codepath to not call into the filesystem and
ignore acls.
But a more straightforward fix for v6.2 is to do the same thing that
Overlayfs does and give fuse a separate get acl method for permission
checking. Overlayfs uses this to express different needs for vfs
permission lookup and acl based retrieval via the regular system call
path as well. Let fuse do the same for now. This way fuse can continue
to refuse to retrieve posix acls for daemons that don't set
FUSE_POSXI_ACL for permission checking while allowing a fuse server to
retrieve it via the usual system calls.
In the future, we could extend the get acl inode operation to not just
pass a simple boolean to indicate rcu lookup but instead make it a flag
argument. Then in addition to passing the information that this is an
rcu lookup to the filesystem we could also introduce a flag that tells
the filesystem that this is a request from the vfs to use these acls for
permission checking. Then fuse could refuse the get acl request for
permission checking when the daemon doesn't have FUSE_POSIX_ACL set in
the same get acl method. This would also help Overlayfs and allow us to
remove the second method for it as well.
But since that change is more invasive as we need to update the get acl
inode operation for multiple filesystems we should not do this as a fix
for v6.2. Instead we will do this for the v6.3 merge window.
Fwiw, since posix acls are now always correctly translated in the new
posix acl api we could also allow them to be used for daemons without
FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral
change and again if dones should be done for v6.3. For now, let's just
restore the original behavior.
A nice side-effect of this change is that for fuse daemons with and
without FUSE_POSIX_ACL the same code is used for posix acls in a
backwards compatible way. This also means we can remove the legacy xattr
handlers completely. We've also added comments to explain the expected
behavior for daemons without FUSE_POSIX_ACL into the code.
Fixes: 318e66856d ("xattr: use posix acl api")
Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY5cH0wAKCRDh3BK/laaZ
PAIJAQC658ZaXRgWBZ/XmCqbb+c8g/InrccE+PXhtVGYTiWTiwD/ZEy7r/X/uJaO
gb5anxJT5jVJ9Qfk1VbyZqdwqUqydAo=
=If6t
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
- Allow some write requests to proceed in parallel
- Fix a performance problem with allow_sys_admin_access
- Add a special kind of invalidation that doesn't immediately purge
submounts
- On revalidation treat the target of rename(RENAME_NOREPLACE) the same
as open(O_EXCL)
- Use type safe helpers for some mnt_userns transformations
* tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Rearrange fuse_allow_current_process checks
fuse: allow non-extending parallel direct writes on the same file
fuse: remove the unneeded result variable
fuse: port to vfs{g,u}id_t and associated helpers
fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE
fuse: always revalidate rename target dentry
fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY
fs/fuse: Replace kmap() with kmap_local_page()
This is a followup to a previous commit of mine [0], which added the
allow_sys_admin_access && capable(CAP_SYS_ADMIN) check. This patch
rearranges the order of checks in fuse_allow_current_process without
changing functionality.
Commit 9ccf47b26b ("fuse: Add module param for CAP_SYS_ADMIN access
bypassing allow_other") added allow_sys_admin_access &&
capable(CAP_SYS_ADMIN) check to the beginning of the function, with the
reasoning that allow_sys_admin_access should be an 'escape hatch' for users
with CAP_SYS_ADMIN, allowing them to skip any subsequent checks.
However, placing this new check first results in many capable() calls when
allow_sys_admin_access is set, where another check would've also returned
1. This can be problematic when a BPF program is tracing capable() calls.
At Meta we ran into such a scenario recently. On a host where
allow_sys_admin_access is set but most of the FUSE access is from processes
which would pass other checks - i.e. they don't need CAP_SYS_ADMIN 'escape
hatch' - this results in an unnecessary capable() call for each fs op. We
also have a daemon tracing capable() with BPF and doing some data
collection, so tracing these extraneous capable() calls has the potential
to regress performance for an application doing many FUSE ops.
So rearrange the order of these checks such that CAP_SYS_ADMIN 'escape
hatch' is checked last. Add a small helper, fuse_permissible_uidgid, to
make the logic easier to understand. Previously, if allow_other is set on
the fuse_conn, uid/git checking doesn't happen as current_in_userns result
is returned. These semantics are maintained here: fuse_permissible_uidgid
check only happens if allow_other is not set.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a flag to entry expiration that lets the filesystem expire a dentry
without kicking it out from the cache immediately.
This makes a difference for overmounted dentries, where plain invalidation
would detach all submounts before dropping the dentry from the cache. If
only expiry is set on the dentry, then any overmounts are left alone and
until ->d_revalidate() is called.
Note: ->d_revalidate() is not called for the case of following a submount,
so invalidation will only be triggered for the non-overmounted case. The
dentry could also be mounted in a different mount instance, in which case
any submounts will still be detached.
Suggested-by: Jakob Blomer <jblomer@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.
Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().
As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This is basically equivalent to the FUSE_CREATE operation which creates and
opens a regular file.
Add a new FUSE_TMPFILE operation, otherwise just reuse the protocol and the
code for FUSE_CREATE.
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.
On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.
This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.
Fix by copying pages coming from the user address space to new pipe
buffers.
Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the per inode DAX hint changes while the file is still *opened*, it
is quite complicated and maybe fragile to dynamically change the DAX
state.
Hence mark the inode and corresponding dentries as DONE_CACHE once the
per inode DAX hint changes, so that the inode instance will be evicted
and freed as soon as possible once the file is closed and the last
reference to the inode is put. And then when the file gets reopened next
time, the new instantiated inode will reflect the new DAX state.
In summary, when the per inode DAX hint changes for an *opened* file, the
DAX state of the file won't be updated until this file is closed and
reopened later.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Among the FUSE_INIT phase, client shall advertise per inode DAX if it's
mounted with "dax=inode". Then server is aware that client is in per
inode DAX mode, and will construct per-inode DAX attribute accordingly.
Server shall also advertise support for per inode DAX. If server doesn't
support it while client is mounted with "dax=inode", client will
silently fallback to "dax=never" since "dax=inode" is advisory only.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
DAX may be limited in some specific situation. When the number of usable
DAX windows is under watermark, the recalim routine will be triggered to
reclaim some DAX windows. It may have a negative impact on the
performance, since some processes may need to wait for DAX windows to be
recalimed and reused then. To mitigate the performance degradation, the
overall DAX window need to be expanded larger.
However, simply expanding the DAX window may not be a good deal in some
scenario. To maintain one DAX window chunk (i.e., 2MB in size), 32KB
(512 * 64 bytes) memory footprint will be consumed for page descriptors
inside guest, which is greater than the memory footprint if it uses
guest page cache when DAX disabled. Thus it'd better disable DAX for
those files smaller than 32KB, to reduce the demand for DAX window and
thus avoid the unworthy memory overhead.
Per inode DAX feature is introduced to address this issue, by offering a
finer grained control for dax to users, trying to achieve a balance
between performance and memory overhead.
The FUSE_ATTR_DAX flag in FUSE_LOOKUP reply is used to indicate whether
DAX should be enabled or not for corresponding file. Currently the state
whether DAX is enabled or not for the file is initialized only when
inode is instantiated.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We add 'always', 'never', and 'inode' (default). '-o dax' continues to
operate the same which is equivalent to 'always'.
The following behavior is consistent with that on ext4/xfs:
- The default behavior (when neither '-o dax' nor
'-o dax=always|never|inode' option is specified) is equal to 'inode'
mode, while 'dax=inode' won't be printed among the mount option list.
- The 'inode' mode is only advisory. It will silently fallback to 'never'
mode if fuse server doesn't support that.
Also noted that by the time of this commit, 'inode' mode is actually equal
to 'always' mode, before the per inode DAX flag is introduced in the
following patch.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When a new inode is created, send its security context to server along with
creation request (FUSE_CREAT, FUSE_MKNOD, FUSE_MKDIR and FUSE_SYMLINK).
This gives server an opportunity to create new file and set security
context (possibly atomically). In all the configurations it might not be
possible to set context atomically.
Like nfs and ceph, use security_dentry_init_security() to dermine security
context of inode and send it with create, mkdir, mknod, and symlink
requests.
Following is the information sent to server.
fuse_sectx_header, fuse_secctx, xattr_name, security_context
- struct fuse_secctx_header
This contains total number of security contexts being sent and total
size of all the security contexts (including size of
fuse_secctx_header).
- struct fuse_secctx
This contains size of security context which follows this structure.
There is one fuse_secctx instance per security context.
- xattr name string
This string represents name of xattr which should be used while setting
security context.
- security context
This is the actual security context whose size is specified in
fuse_secctx struct.
Also add the FUSE_SECURITY_CTX flag for the `flags` field of the
fuse_init_out struct. When this flag is set the kernel will append the
security context for a newly created inode to the request (create, mkdir,
mknod, and symlink). The server is responsible for ensuring that the inode
appears atomically (preferrably) with the requested security context.
For example, If the server is using SELinux and backed by a "real" linux
file system that supports extended attributes it can write the security
context value to /proc/thread-self/attr/fscreate before making the syscall
to create the inode.
This patch is based on patch from Chirantan Ekbote <chirantan@chromium.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_update_attributes() refreshes metadata for internal use.
Each use needs a particular set of attributes to be refreshed, but
currently that cannot be expressed and all but atime are refreshed.
Add a mask argument, which lets fuse_update_get_attr() to decide based on
the cache_mask and the inval_mask whether a GETATTR call is needed or not.
Reported-by: Yongji Xie <xieyongji@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If writeback_cache is enabled, then the size, mtime and ctime attributes of
regular files are always valid in the kernel's cache. They are retrieved
from userspace only when the inode is freshly looked up.
Add a more generic "cache_mask", that indicates which attributes are
currently valid in cache.
This patch doesn't change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
