- a fix for Zinitix driver to not fail probing if property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support
for more hardware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZxMk3gAKCRBAj56VGEWX
nHcXAP99ROP6m6hoGUEvCKVtWQuuKPxJTMByLpdpHdTcX15HdQD9GB9HBVnBdIV5
hckmsRPttRfhUIlMyWWR54anNidx4ww=
=yn7x
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Tested-by: Jakob Hauser <jahau@rocketmail.com>
Fixes: 075d9b22c8 ("Input: zinitix - add touchkey support")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20241004-zinitix-no-keycodes-v2-1-876dc9fea4b6@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add MSI Claw A1M controller to xpad_device match table when in xinput mode.
Add MSI VID as XPAD_XBOX360_VENDOR.
Signed-off-by: John Edwards <uejji@uejji.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Christopher Snowhill <kode54@gmail.com>
Link: https://lore.kernel.org/r/20241010232020.3292284-4-uejji@uejji.net
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZv3NAgAKCRBZ7Krx/gZQ
68kbAP0YzQxUgl0/o7Soda8XwKSPZTM9ls6kRk1UHTTG/i4ZigEA/G+i/mBQctL0
AB911kK8mxfXppfOXzstFBjoJSqiigQ=
=IE7D
-----END PGP SIGNATURE-----
Merge tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped temporarily
because its detection routine is too greedy and mis-identifies devices
from other vendors as PixArt devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZv0LRAAKCRBAj56VGEWX
nM7OAP495t23Ay4H7qBnVEv4KHrOkNLwebKudwcokjWQAdnOPgEAu0GfslScWdrO
yYofhsjrph1V2dQOWqoLnd1C4iiHVgA=
=HQCS
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped
temporarily because its detection routine is too greedy and
mis-identifies devices from other vendors as PixArt devices
* tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adp5589-keys - fix adp5589_gpio_get_value()
Input: adp5589-keys - fix NULL pointer dereference
Revert "Input: Add driver for PixArt PS/2 touchpad"
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit 740ff03d72 because
current PixArt detection is too greedy and claims devices that are
not PixArt.
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch IC
registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup functions
to simplify releasing of resources (with more drivers to follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZvGnWgAKCRBAj56VGEWX
nDjGAQCHcRk1icJlyjx3KA85gdILriDB9zMNJnCnbYXrSfGbOQD+LZNjO3po26zB
wloLEYTKRu3E/oWEI8VcfIN2m89vxw4=
=bDsb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce3 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240918032246.9147-1-shenlichuan@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
osS0AQCgIpvey9oW5DMyMw6Bv0hFMRv95gbNQZfHy09iK+NMNAD9GALhb/4cMIVB
7YrZGXEz454lpgcs8AnrOVjVNfctOQg=
=e9s9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u32_array() takes a
minimum and maximum length and returns the actual length (or error
code).
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240913200827.546649-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9ee0a05588 ("Input: PS/2 gpio bit banging driver for serio bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20240912033013.2610949-1-ruanjinjie@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
f_version is removed from struct file. Make input stop abusing f_version
for stashing information for poll. Move the input state counter into
input_seq_state and allocate it via seq_private_open() and free via
seq_release_private().
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-12-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The driver waits for the device to boot, which can be a lengthy
process. Switch it to asynchronous probing to allow more devices
to be probed simultaneously.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop forcing interrupt to be low level triggered and instead rely on the
platform to define proper trigger to allow flexibility in board designs.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not actively manage regulator state past probe() time,
so we can use devm_regulator_get_enable() to simplify the code.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This regulator is not optional from the controller point of view,
so stop treating it as such. For hard-wired designs that omit the
regulator from their device trees regulator subsystem will create
a dummy instance.
This may introduce unnecessary delay of 100us in case of dummy
regulator, but if it is important the driver should be marked as
using asynchronous probing to avoid even longer delays waiting for
the command completions.
Also use usleep_range() instead of udelay() to avoid spinning.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use dev_err_probe() helper to log deferrals in the devices_deferred
debugfs file and avoid extra messages in the logs.
Also rename "ret" variables holding error codes only to "error".
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We should abort probe on any error besides -ENOENT which signifies that
the regulator is not defined in device tree or elsewhere, not only
when we see -EPROBE_DEFER.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Zforce touch data packet consists of a byte representing number of
contacts followed by several chunks with length of 9 bytes representing
each contact. Instead of accounting for the leading byte by increasing
offset of each field in contacts by one introduce a pointer to contact
data and point it appropriately. This avoids awkward constructs like:
point.prblty = payload[9 * i + 9];
which makes it seem like there is off-by-one error, in favor of more
straightforward:
point.prblty = p[8];
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing conversion from little-endian data to CPU endianness
by hand use existing helpers.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation allows for simpler code and ensures that mutexes are
automatically released in all code paths.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a small chance that ts->suspending flag may change while the
interrupt handler is running. To make sure call to pm_relax() is not
skipped on accident use a temporary to hold the original value at the
beginning of interrupt. Use READ_ONCE() so that the value is actually
fetched at the right time.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to have a lock around calls to i2c_master_send() and
i2c_master_recv() as they are not issued concurrently and they are not
sharing any buffers. Also there is no need for command_mutex as all
commands are issued sequentially.
Remove both.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core and various helpers already do that for us, so drop the code
setting these bits explicitly.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-tree users of platform data and any new ones should
either use device tree or static device properties, so let's remove
platform data support.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_mt_report_slot_state() returns true if slot is active, so we can
combine checks for point.state != STATE_UP.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup
function has been already called by the helper if there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that locks are released in all code paths when control
leaves critical section.
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references
to acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Start using __free() and guard() primitives to simplify the code
and error handling. This makes the code more compact and error
handling more robust by ensuring that locks are released in all
code paths when control leaves critical section and all allocated
memory is freed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
