This is an error path so set the error code. Smatch complains about the
current code:
drivers/opp/core.c:2660 dev_pm_opp_set_config()
error: uninitialized symbol 'ret'.
Fixes: e37440e7e2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/3f3660af-4ea0-4a89-b3b7-58de7b16d7a5@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge updates related to system sleep, operating performance points
(OPP) updates, and PM tooling updates for 6.12-rc1:
- Remove unused stub for saveable_highmem_page() and remove deprecated
macros from power management documentation (Andy Shevchenko).
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo).
- Update the maintainers information for the operating-points-v2-ti-cpu DT
binding (Dhruva Gole).
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring).
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin).
- Make cpupower display residency value in idle-info (Aboorva
Devarajan).
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV).
- Add SWIG support to cpupower (John B. Wyatt IV).
* pm-sleep:
PM: hibernate: Remove unused stub for saveable_highmem_page()
Documentation: PM: Discourage use of deprecated macros
PM: sleep: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
* pm-opp:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
* pm-tools:
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
pm-graph: Update directory handling and installation process in Makefile
pm-graph: Make git ignore sleepgraph.py artifacts
tools/cpupower: display residency value in idle-info
of_match_ptr() is not necessary as the driver is always enabled for DT.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It has turned out that having _set_required_opps() to recursively call
dev_pm_opp_set_opp() to set the required OPPs, doesn't really work as well
as we expected.
More precisely, at each recursive call to dev_pm_opp_set_opp() we are
changing an OPP for a required_dev that belongs to a required-OPP table.
The problem with this, is that we may have several devices sharing the same
required-OPP table, which leads to an incorrect behaviour in regards to
aggregating the per device votes.
To fix the problem for a required-OPP table belonging to a PM domain, which
is the only existing usecase for now, let's simply replace the call to
dev_pm_opp_set_opp() in _set_required_opps() by a call to _set_opp_level().
Moving forward we may potentially need to add support for other types of
required-OPP tables. In this case, the aggregation needs to be thought of.
Fixes: e37440e7e2 ("OPP: Call dev_pm_opp_set_opp() for required OPPs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20240822224547.385095-2-ulf.hansson@linaro.org
Merge OPP (operating performance points) and tooling updates for
6.11-rc1:
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar).
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson).
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt).
- Address several assorted issues in the cpupower utility (Roman
Storozhenko).
* pm-opp:
OPP: Introduce an OF helper function to inform if required-opps is used
OPP: Drop a redundant in-parameter to _set_opp_level()
OPP: Fix missing cleanup on error in _opp_attach_genpd()
* pm-tools:
cpupower: fix lib default installation path
cpupower: Disable direct build of the 'bench' subproject
cpupower: Change the var type of the 'monitor' subcommand display mode
cpupower: Remove absent 'v' parameter from monitor man page
cpupower: Improve cpupower build process description
cpupower: Add 'help' target to the main Makefile
cpupower: Replace a dead reference link with working ones
pm-graph: v5.12, code revamp for python3.12
pm-graph: v5.12, fixes
As being shown from a subsequent change to genpd, it's useful to understand
if a device's OF node has an OPP-table described and whether it contains
OPP nodes that makes use of the required-opps DT property.
For this reason, let's introduce an OPP OF helper function called
dev_pm_opp_of_has_required_opp().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The in-parameter "opp_table" isn't needed by _set_opp_level(). Let's
therefore drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Function ti_opp_supply_probe() since commit 6baee034cb ("OPP: ti:
Migrate to dev_pm_opp_set_config_regulators()") returns wrong values
when all goes well and hence driver probing eventually fails.
Fixes: 6baee034cb ("OPP: ti: Migrate to dev_pm_opp_set_config_regulators()")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A recent commit updated the code mistakenly to return directly on
errors, without doing the required cleanups. Fix it.
Fixes: 2a56c462fe ("OPP: Fix required_opp_tables for multiple genpds using same table")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202405180016.4fbn86bm-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Fix required_opp_tables for multiple genpds using same table (Viresh
Kumar).
-----BEGIN PGP SIGNATURE-----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=+eou
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Merge OPP updates for v6.10 from Viresh Kumar:
"- Fix required_opp_tables for multiple genpds using same table (Viresh
Kumar)."
* tag 'opp-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Fix required_opp_tables for multiple genpds using same table
The required_opp_tables parsing is not perfect, as the OPP core does the
parsing solely based on the DT node pointers.
The core sets the required_opp_tables entry to the first OPP table in
the "opp_tables" list, that matches with the node pointer.
If the target DT OPP table is used by multiple devices and they all
create separate instances of 'struct opp_table' from it, then it is
possible that the required_opp_tables entry may be set to the incorrect
sibling device.
Unfortunately, there is no clear way to initialize the right values
during the initial parsing and we need to do this at a later point of
time.
Cross check the OPP table again while the genpds are attached and fix
them if required.
Also add a new API for the genpd core to fetch the device pointer for
the genpd.
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682
Co-developed-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
There are device drivers which can modify voltage values for OPPs. It
could be due to the chip binning and those drivers have specific chip
knowledge about it. This adjustment can happen after Energy Model is
registered, thus EM can have stale data about power.
Export dev_opp_pm_calc_power() which can be used by Energy Model to
calculate new power with the new voltage for OPPs.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the kernel isn't built with interconnect support, icc_get_name()
returns NULL and we get following warning:
drivers/opp/debugfs.c: In function 'bw_name_read':
drivers/opp/debugfs.c:43:42: error: '%.62s' directive argument is null [-Werror=format-overflow=]
i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));
Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Fixes: 0430b1d570 ("opp: Expose bandwidth information via debugfs")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
We currently get the following warning:
debugfs.c:105:54: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
snprintf(name, sizeof(name), "supply-%d", i);
^~
debugfs.c:105:46: note: directive argument in the range [-2147483644, 2147483646]
snprintf(name, sizeof(name), "supply-%d", i);
^~~~~~~~~~~
debugfs.c:105:17: note: 'snprintf' output between 9 and 19 bytes into a destination of size 15
snprintf(name, sizeof(name), "supply-%d", i);
Fix this and other potential issues it by allocating larger arrays.
Use the exact string format to allocate the arrays without getting into
these issues again.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Let's extend the dev_pm_opp_data with a turbo variable, to allow users to
specify if it's a boost frequency for a dynamically added OPP.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core finds the eventual frequency to set with the help of
clk_round_rate() and the same was earlier getting passed to _set_opp()
and that's what would get configured.
The commit 1efae8d2e7 ("OPP: Make dev_pm_opp_set_opp() independent of
frequency") mistakenly changed that. Fix it.
Fixes: 1efae8d2e7 ("OPP: Make dev_pm_opp_set_opp() independent of frequency")
Cc: v5.18+ <stable@vger.kernel.org> # v6.0+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
By mistake, dev_pm_opp_find_level_floor() used the level parameter as
unsigned long instead of unsigned int. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
_find_key_ceil() may return an error and that must be checked before
passing the same to dev_pm_opp_put().
Fixes: 41907aa4ae37 ("OPP: Level zero is valid")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Like other frameworks (clk, regulator, etc.) genpd core too takes care
of propagation to performance state to parent genpds. The OPP core
shouldn't attempt the same, or it may result in undefined behavior.
Add checks at various places to take care of the same.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Configuring the required OPP was never properly implemented, we just
took an exception for genpds and configured them directly, while leaving
out all other required OPP types.
Now that a standard call to dev_pm_opp_set_opp() takes care of
configuring the opp->level too, the special handling for genpds can be
avoided by simply calling dev_pm_opp_set_opp() for the required OPPs,
which shall eventually configure the corresponding level for genpds.
This also makes it possible for us to configure other type of required
OPPs (no concrete users yet though), via the same path. This is how
other frameworks take care of parent nodes, like clock, regulators, etc,
where we recursively call the same helper.
In order to call dev_pm_opp_set_opp() for the virtual genpd devices,
they must share the OPP table of the genpd. Call _add_opp_dev() for them
to get that done.
This commit also extends the struct dev_pm_opp_config to pass required
devices, for non-genpd cases, which can be used to call
dev_pm_opp_set_opp() for the non-genpd required devices.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are two genpd (as required-opp) cases that we need to handle,
devices with a single genpd and ones with multiple genpds.
The multiple genpds case is clear, where the OPP core calls
dev_pm_domain_attach_by_name() for them and uses the virtual devices
returned by this helper to call dev_pm_domain_set_performance_state()
later to change the performance state.
The single genpd case however requires special handling as we need to
use the same `dev` structure (instead of a virtual one provided by genpd
core) for setting the performance state via
dev_pm_domain_set_performance_state().
As we move towards more generic code to take care of the required OPPs,
where we will recursively call dev_pm_opp_set_opp() for all the required
OPPs, the above special case becomes a problem.
It doesn't make sense for a device's DT entry to have both "opp-level"
and single "required-opps" entry pointing to a genpd's OPP, as that
would make the OPP core call dev_pm_domain_set_performance_state() for
two different values for the same device structure. And so we can reuse
the 'opp->level" field in such a case and call _set_opp_level() for the
device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The level zero can be used by some OPPs to drop performance state vote
for the device. It is perfectly fine to allow the same.
_set_opp_level() considers it as an invalid value currently and returns
early.
In order to support this properly, initialize the level field with
U32_MAX, which denotes unused level field.
Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
As this driver only does DT based matching, of_match_device() will never
return NULL if we've gotten to probe(). Therefore, the NULL check and
error return for it can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the new interface for attaching genpd's via the OPP core was added,
it was possible for required_opp_count to be zero, but not anymore.
Remove the unused check.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
All the config operations for OPP tables share common code paths now and
none of the other ones have such protection in place. Either all should
have it or none.
The understanding here is that user won't clear the OPP configs while
still using them and so such a case won't happen. We can always come
back and use a wider lock for all resource types if required.
Also fix the error on failing to allocate memory.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/opp/of.c:1081:28: error: multiple unsequenced modifications to 'val' [-Werror,-Wunsequenced]
1081 | .freq = be32_to_cpup(val++) * 1000,
| ^
1082 | .u_volt = be32_to_cpup(val++),
| ~~
1 error generated.
There is no sequence point in a designated initializer. Move back to
separate variables for the creation of the values, so that there are
sequence points between each evaluation and increment of val.
Fixes: 75bbc92c09d8 ("OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We currently get the following warning:
debugfs.c: In function ‘opp_debug_create_one’:
debugfs.c:63:42: warning: ‘%.1d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(name, sizeof(name), "icc-path-%.1d", i);
^~~~
debugfs.c:63:32: note: directive argument in the range [0, 2147483647]
snprintf(name, sizeof(name), "icc-path-%.1d", i);
^~~~~~~~~~~~~~~
debugfs.c:63:3: note: ‘snprintf’ output between 11 and 20 bytes into a destination of size 11
snprintf(name, sizeof(name), "icc-path-%.1d", i);
Fix it by increasing size of the `name` array.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
These were previously exposed outside of the OPP core and needed doc
style commenting. They aren't public now and don't need the same.
This fixes warnings generated for builds with `W=1`:
core.c:2105: warning: Function parameter or member 'opp_table' not described in '_opp_set_supported_hw'
core.c:2105: warning: Excess function parameter 'dev' description in '_opp_set_supported_hw'
core.c:2148: warning: Function parameter or member 'opp_table' not described in '_opp_set_prop_name'
core.c:2148: warning: Excess function parameter 'dev' description in '_opp_set_prop_name'
core.c:2189: warning: Function parameter or member 'opp_table' not described in '_opp_set_regulators'
core.c:2189: warning: Excess function parameter 'count' description in '_opp_set_regulators'
core.c:2293: warning: Function parameter or member 'opp_table' not described in '_opp_set_clknames'
core.c:2293: warning: Function parameter or member 'config_clks' not described in '_opp_set_clknames'
core.c:2391: warning: Function parameter or member 'opp_table' not described in '_opp_set_config_regulators_helper'
core.c:2455: warning: Function parameter or member 'opp_table' not described in '_opp_attach_genpd'
core.c:2682: warning: Function parameter or member 'token' not described in 'dev_pm_opp_clear_config'
core.c:2682: warning: Excess function parameter 'opp_table' description in 'dev_pm_opp_clear_config'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309091558.x3JJrxFI-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add dev_pm_opp_find_level_floor(), as is done for frequency and
bandwidth.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
[ Viresh: Updated commit log and rearranged code ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
At this point the level (performance state) for an OPP is currently limited
to be requested for a device that is attached to a PM domain. Moreover,
the device needs to have the so called required-opps assigned to it, which
are based upon OPP tables being described in DT.
To extend the support beyond required-opps and DT, let's enable the level
to be set for all OPPs. More precisely, if the requested OPP has a valid
level let's try to request it through the device's optional PM domain, via
calling dev_pm_domain_set_performance_state().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: Handle NULL opp in _set_opp_level() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
To support performance scaling for any kinds of PM domains, let's move away
from using the genpd specific API, dev_pm_genpd_set_performance_state(), to
the common dev_pm_domain_set_performance_state().
No intended functional impact at this point.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Let's extend the dev_pm_opp_data with a level variable, to allow users to
specify a corresponding level (performance state) for a dynamically added
OPP.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency
and a voltage level. To enable more flexibility, let's add a new API,
dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of
a list of in-parameters.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to
PTR_ERR() as reported by the smatch warning below:
drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR'
Fix it by checking for the non-NULL virt_dev pointer before passing it to
PTR_ERR. Otherwise return -ENODEV.
Fixes: 4ea9496cbc ("opp: Fix error check in dev_pm_opp_attach_genpd()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
"opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by
removing the dereference to cache opp_table and dereference it directly
where opp_table is used.
This fixes the following smatch warning:
drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable
dereferenced before IS_ERR check 'opp' (see line 230)
Fixes: 84cb7ff35f ("OPP: pstate is only valid for genpd OPP tables")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that we support finding indexed frequencies, lets update
_read_freq() to return the right one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The indexed version of the API is added for other floor and ceil, add
the same for exact as well for completeness.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the case of devices with multiple clocks, drivers need to specify the
frequency index for the OPP framework to get the specific frequency within
the required OPP. So let's introduce the dev_pm_opp_get_freq_indexed() API
accepting the frequency index as an argument.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Fixed potential access to NULL opp pointer ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the case of devices with multiple clocks, drivers need to specify the
clock index for the OPP framework to find the OPP corresponding to the
floor/ceil of the supplied frequency. So let's introduce the two new APIs
accepting the clock index as an argument.
These APIs use the exising _find_key_ceil() helper by supplying the clock
index to it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Rearranged definitions in pm_opp.h ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
fa155f4f83 ("OPP: Use dev_err_probe() when failing to get icc_path")
failed to actually use the error it was trying to log:
smatch warnings:
drivers/opp/of.c:516 dev_pm_opp_of_find_icc_paths() warn: passing zero to 'dev_err_probe'
Make sure to use the right error and pass it along.
Fixes: fa155f4f83 ("OPP: Use dev_err_probe() when failing to get icc_path")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202306262008.guNLgjt6-lkp@intel.com/
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This, in tandem with dynamic debug, can print useful information about
-EPROBE_DEFFER like below, and keeps similar behavior for other errors:
[ 16.561072] cpu cpu0: error -EPROBE_DEFER: dev_pm_opp_of_find_icc_paths: Unable to get path0
[ 16.575777] platform 18591000.cpufreq: deferred probe pending
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
