Rather than determining whether we're using a MD5 hash by looking at
the digest size, switch to a cleaner solution using a per-request flag
initialised by the method type.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, we read/write the state in CPU endian, but on the final
request, we convert its endian according to the requested algorithm.
(md5 is little endian, SHA are big endian.)
Always keep creq->state in CPU native endian format, and perform the
necessary conversion when copying the hash to the result.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's an easier way to get at the hash transform - rather than
using crypto_ahash_tfm(ahash), we can get it directly from
req->base.tfm.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
qat_crypto_get_instance_node function needs to handle situation when the
first dev in the list is not started.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some array of const char are not set as const.
This patch fix that.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some array of const char are not set as const.
This patch fix that.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/highmem.h> is the placace the get the kmap type flags, asm-generic
files are generic implementations only to be used by architecture code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Using the devm_xxx() managed function to stripdown the error
and remove code.
In the same time, we replace request_mem_region/ioremap by the unified
devm_ioremap_resource() function.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using the devm_xxx() managed function to stripdown the error and remove
code.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mxs-dcp driver relies on the stmp_reset_block() helper function, which
is provided by CONFIG_STMP_DEVICE. This symbol is always set on MXS,
but the driver can now also be built for MXC (i.MX6), which results
in a built error if no other driver selects STMP_DEVICE:
drivers/built-in.o: In function `mxs_dcp_probe':
vf610-ocotp.c:(.text+0x3df302): undefined reference to `stmp_reset_block'
This adds the 'select', like all other stmp drivers have it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a2712e6c75 ("crypto: mxs-dcp - Allow MXS_DCP to be used on MX6SL")
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As all the import functions and export functions are virtually
identical, factor out their common parts into a generic
mv_cesa_ahash_import() and mv_cesa_ahash_export() respectively. This
performs the actual import or export, and we pass the data pointers and
length into these functions.
We have to switch a % const operation to do_div() in the common import
function to avoid provoking gcc to use the expensive 64-bit by 64-bit
modulus operation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Attempting to use the sha1 digest for openssh via openssl reveals that
the result from the hash is wrong: this happens when we export the
state from one socket and import it into another via calling accept().
The reason for this is because the operation is reset to "initial block"
state, whereas we may be past the first fragment of data to be hashed.
Arrange for the operation code to avoid the initialisation of the state,
thereby preserving the imported state.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a AF_ALG fd is accepted a second time (hence hash_accept() is
used), hash_accept_parent() allocates a new private context using
sock_kmalloc(). This context is uninitialised. After use of the new
fd, we eventually end up with the kernel complaining:
marvell-cesa f1090000.crypto: dma_pool_free cesa_padding, c0627770/0 (bad dma)
where c0627770 is a random address. Poisoning the memory allocated by
the above sock_kmalloc() produces kernel oopses within the marvell hash
code, particularly the interrupt handling.
The following simplfied call sequence occurs:
hash_accept()
crypto_ahash_export()
marvell hash export function
af_alg_accept()
hash_accept_parent() <== allocates uninitialised struct hash_ctx
crypto_ahash_import()
marvell hash import function
hash_ctx contains the struct mv_cesa_ahash_req in its req.__ctx member,
and, as the marvell hash import function only partially initialises
this structure, we end up with a lot of members which are left with
whatever data was in memory prior to sock_kmalloc().
Add zero-initialisation of this structure.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electronc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Several of the algorithms in marvell/hash.c have a statesize of zero.
When an AF_ALG accept() on an already-accepted file descriptor to
calls into hash_accept(), this causes:
char state[crypto_ahash_statesize(crypto_ahash_reqtfm(req))];
to be zero-sized, but we still pass this to:
err = crypto_ahash_export(req, state);
which proceeds to write to 'state' as if it was a "struct md5_state",
"struct sha1_state" etc. Add the necessary initialisers for the
.statesize member.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds CRC generation and validation support for nx-842.
Add CRC flag so that nx842 coprocessor includes CRC during compression
and validates during decompression.
Also changes in 842 SW compression to append CRC value at the end
of template and checks during decompression.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Setkey function has been split into set_priv_key and set_pub_key.
Akcipher requests takes sgl for src and dst instead of void *.
Users of the API i.e. two existing RSA implementation and
test mgr code have been updated accordingly.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clk_prepare_enable() can fail so add a check for this and
return the error code if it fails.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for AES working in XEX-based Tweaked-codebook mode with
ciphertext Stealing (XTS)
sector index - HW limitation: CAAM device supports sector index of only
8 bytes to be used for sector index inside IV, instead of whole 16 bytes
received on request. This represents 2 ^ 64 = 16,777,216 Tera of possible
values for sector index.
Signed-off-by: Cristian Hristea <cristi.hristea@gmail.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Catalin Vasile <catalin.vasile@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qce driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing qce_mapsg, qce_unmapsg and qce_countsg functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The convention is to use the name of the module in the driver structures
that are used for registering the device. The CCP module is currently
using a descriptive name. Replace the descriptive name with module name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CCP is meant to be more of an offload engine than an accelerator
engine. To avoid any confusion, change references to accelerator to
offload.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the creation of the device_dma_is_coherent API the "use_acpi" field
is no longer needed, so remove it.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the usage of BUG_ON with WARN_ON and return an error.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove unneeded variable val_indx.
Issue found by a static analyzer.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for ctr and xts encryption modes.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sahara driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing the sahara_sha_unmap_sg function.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The caam driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing dma_map_sg_chained, dma_unmap_sg_chained
and __sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The talitos driver use two dma_map_sg path
according to SG are chained or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing talitos_map_sg, talitos_unmap_sg_chain
and sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some code cleanups after crypto API changes:
- Change qat_algs_unregister to a void function to keep it consistent
with qat_asym_algs_unregister.
- Remove empty functions qat_algs_init & qat_algs_exit.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- check the return value of platform_get_irq as signed int in xgene.
- skip adf_dev_restore on virtual functions in qat.
- fix double-free with backlogged requests in marvell_cesa"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: xgene - fix handling platform_get_irq
crypto: qat - VF should never trigger SBR on PH
crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests
The sahara_sg_length function of the sahara driver is the same
as sg_nents_for_len from lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The get_sg_count function of amcc is the same as sg_nents_for_len from
lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg_count function in bfin_crc.c is the same function as sg_nents.
Remove the duplicate code and use sg_nents() instead.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't allow to trigger SBR from a VF running in VMM context.
Cc: stable@vger.kernel.org
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa_queue_req() function calls crypto_enqueue_request() to
enqueue a request. In the normal case (i.e the queue isn't full), this
function returns -EINPROGRESS. The current Marvell CESA crypto driver
takes this into account and cleans up the request only if an error
occured, i.e if the return value is not -EINPROGRESS.
Unfortunately this causes problems with
CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests. When such a request is
passed to crypto_enqueue_request() and the queue is full,
crypto_enqueue_request() will return -EBUSY, but will keep the request
enqueued nonetheless. This situation was not properly handled by the
Marvell CESA driver, which was anyway cleaning up the request in such
a situation. When later on the request was taken out of the backlog
and actually processed, a kernel crash occured due to the internal
driver data structures for this structure having been cleaned up.
To avoid this situation, this commit adds a
mv_cesa_req_needs_cleanup() helper function which indicates if the
request needs to be cleaned up or not after a call to
crypto_enqueue_request(). This helper allows to do the cleanup only in
the appropriate cases, and all call sites of mv_cesa_queue_req() are
fixed to use this new helper function.
Reported-by: Vincent Donnefort <vdonnefort@gmail.com>
Fixes: db509a4533 ("crypto: marvell/cesa - add TDMA support")
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Load balancing of crypto instances only used a single device.
There was no problem with that on PF, but since there is only
one or two instance per VF we need to loadbalance across devices.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit a1efb01fec ("jump_label, locking/static_keys: Rename
JUMP_LABEL_TYPE_* and related helpers to the static_key* pattern")
introduced the definition of JUMP_TYPE_MASK in
include/linux/jump_label.h causing the following name collision:
In file included from drivers/crypto/caam/desc_constr.h:7:0,
from drivers/crypto/caam/ctrl.c:15:
drivers/crypto/caam/desc.h:1495:0: warning: "JUMP_TYPE_MASK" redefined
#define JUMP_TYPE_MASK (0x03 << JUMP_TYPE_SHIFT)
^
In file included from include/linux/module.h:19:0,
from drivers/crypto/caam/compat.h:9,
from drivers/crypto/caam/ctrl.c:11:
include/linux/jump_label.h:131:0: note: this is the location of the previous definition
#define JUMP_TYPE_MASK 1UL
As JUMP_TYPE_MASK definition in desc.h is never used, we can safely remove
it to avoid the name collision.
Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases we don't want iommu to be enabled but still we want to enable VFs.
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MX6SL has the same DCP crypto block as in MX23/MX28, so allow it to be
built for ARCH_MXC.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- The selftest overreads the IV test vector.
- Fix potential infinite loop in sunxi-ss driver.
- Fix powerpc build failure when VMX is set without VSX"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - don't copy from source IV too much
crypto: sunxi-ss - Fix a possible driver hang with ciphers
crypto: vmx - VMX crypto should depend on CONFIG_VSX
The sun4i_ss_opti_poll function cipher data until the output miter have
a length of 0.
If the crypto API client, give more SGs than necessary this could result
in an infinite loop.
Fix it by checking for remaining bytes, just like sun4i_ss_cipher_poll().
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This code uses FP (floating point), Altivec and VSX (Vector-Scalar
Extension). It can just depend on CONFIG_VSX though, because that
already depends on FP and Altivec.
Otherwise we get lots of link errors such as:
drivers/built-in.o: In function `.p8_aes_setkey':
aes.c:(.text+0x2d325c): undefined reference to `.enable_kernel_altivec'
aes.c:(.text+0x2d326c): undefined reference to `.enable_kernel_vsx'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull SG updates from Jens Axboe:
"This contains a set of scatter-gather related changes/fixes for 4.3:
- Add support for limited chaining of sg tables even for
architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph.
- Add sg chain support to target_rd. From Christoph.
- Fixup open coded sg->page_link in crypto/omap-sham. From
Christoph.
- Fixup open coded crypto ->page_link manipulation. From Dan.
- Also from Dan, automated fixup of manual sg_unmark_end()
manipulations.
- Also from Dan, automated fixup of open coded sg_phys()
implementations.
- From Robert Jarzmik, addition of an sg table splitting helper that
drivers can use"
* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
lib: scatterlist: add sg splitting function
scatterlist: use sg_phys()
crypto/omap-sham: remove an open coded access to ->page_link
scatterlist: remove open coded sg_unmark_end instances
crypto: replace scatterwalk_sg_chain with sg_chain
target/rd: always chain S/G list
scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
We need to support legacy VFs as well as VFs running on different OSes.
To do so the compatibility check need needs to be relaxed.
This patch moves the logic responsible for VF to PF version and
compatibility checking from adfsriov.c to adf_pf2vf_msg.c,
where it belongs, and changes the logic enable legacy VFs.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add range check for ring number.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In build time vadduqm opcode is not being mapped
correctly.
Adding a new map in ppc-xlate to do this.
Signed-off-by: Leonidas S Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"The preferred form for passing a size of a struct is the following:
p = kmalloc(sizeof(*p), ...);
....
The preferred form for allocating a zeroed array is the following:
p = kcalloc(n, sizeof(...), ...); "
,so do as suggested.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of propagating a 'fake' error code, just propagate the real
one in the case of caam_drv_identify_clk() failure.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the error path we should disable the resources that were previously
acquired, so fix the error handling accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most significant part of JQCR (Job Queue Control Register) contains
bits that control endianness: ILE - Immediate Little Endian,
DWS - Double Word Swap.
The bits are automatically set by the Job Queue Controller HW.
Unfortunately these bits are cleared in SW when submitting descriptors
via the register-based service interface.
>From LS1021A:
JQCR_MS = 08080100 - before writing: ILE | DWS | SRC (JR0)
JQCR_MS = 30000100 - after writing: WHL | FOUR | SRC (JR0)
This would cause problems on little endian caam for descriptors
containing immediata data or double-word pointers.
Currently there is no problem since the only descriptors ran through
this interface are the ones that (un)instantiate RNG.
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the data allocated using dma_alloc_coherent to the
corresponding managed interface. To be compatible with the change,
various gotos are replaced with direct returns and unneeded labels
are dropped.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
LS1021A is a QorIQ SoC having little endian CAAM.
There are a few differences b/w QorIQ and i.MX from CAAM perspective:
1. i.MX platforms are somewhat special wrt. 64-bit registers:
-big endian format at 64-bit level: MSW at address+0 and LSW at address+4
-little endian format at 32-bit level (within MSW and LSW)
and thus need special handling.
2. No CCM (clock controller module) for QorIQ.
No CAAM clocks to enable / disable.
A new Kconfig option - CRYPTO_DEV_FSL_CAAM_LE - is added to indicate
CAAM is little endian (*). It is hidden from the user (to avoid
misconfiguration); when adding support for a new platform with LE CAAM,
either the Kconfig needs to be updated or the corresponding defconfig
needs to indicate that CAAM is LE.
(*) Using a DT property to provide CAAM endianness would not allow
for the ifdeffery.
In order to keep changes to a minimum, the following changes
are postponed:
-endianness fix of the last word in the S/G (rsvd2, bpid, offset),
fields are always 0 anyway;
-S/G format fix for i.MX7 (yes, i.MX7 support was not added yet,
but still...)
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change memcpy to memmove because the copy is done within the same buffer.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GHASH table algorithm is using a big endian key.
In little endian machines key will be LE ordered.
After a lxvd2x instruction key is loaded as it is,
LE/BE order, in first case it'll generate a wrong
table resulting in wrong hashes from the algorithm.
Bug affects only LE machines.
In order to fix it we do a swap for loaded key.
Cc: stable@vger.kernel.org
Signed-off-by: Leonidas S Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AES-CTR is using a counter 8bytes-8bytes what miss match with
kernel specs.
In the previous code a vadduwm was done to increment counter.
Replacing this for a vadduqm now considering both cases counter
8-8 bytes and full 16bytes.
Cc: stable@vger.kernel.org
Signed-off-by: Leonidas S Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[hch: split from a larger patch by Dan]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[hch: split from a larger patch by Dan]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
The file nx.h has function prototypes that use struct crypto_aead.
However, as crypto/aead.h is not included we don't have a definition
for it. This patch adds a forward declaration to fix this.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compare pointer-typed values to NULL rather than 0.
The semantic patch that makes this change is available
in scripts/coccinelle/null/badzero.cocci
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qat driver uses crypto_aead_crt in order to get the authsize.
This patch replaces it with the crypto_aead_authsize helper instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Variable 'ret' is only used for returning the value 0.
We can make it simpler and just return 0 instead.
The semantic patch that makes this change is available
in scripts/coccinelle/misc/returnvar.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the error paths we should free the resources that were
previously acquired, so fix it accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/qat/qat_common/adf_sriov.c:258:1-4: WARNING: end returns can be simpified and declaration on line 212 can be dropped
Simplify a trivial if-return sequence. Possibly combine with a
preceding function call.
Generated by: scripts/coccinelle/misc/simple_return.cocci
CC: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On sun6i and later platforms, the reset control is split out of the
clock gates. Add support for an optional reset control.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When doing pointer operation for accessing the HW S/G table,
a value representing number of entries (and not number of bytes)
must be used.
Cc: <stable@vger.kernel.org> # 3.6+
Fixes: 045e36780f ("crypto: caam - ahash hmac support")
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When both PF and VF drivers are build in linker complains about multiple
definition of adf_isr_resource_[alloc/free] functions.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 000851119e changed sha256/512 update functions to
pass more data to nx_build_sg_list(), which ends with
sg list overflows and usually with update functions failing
for data larger than max_sg_len * NX_PAGE_SIZE.
This happens because:
- both "total" and "to_process" are updated, which leads to
"to_process" getting overflowed for some data lengths
For example:
In first iteration "total" is 50, and let's assume "to_process"
is 30 due to sg limits. At the end of first iteration "total" is
set to 20. At start of 2nd iteration "to_process" overflows on:
to_process = total - to_process;
- "in_sg" is not reset to nx_ctx->in_sg after each iteration
- nx_build_sg_list() is hitting overflow because the amount of data
passed to it would require more than sgmax elements
- as consequence of previous item, data stored in overflowed sg list
may no longer be aligned to SHA*_BLOCK_SIZE
This patch changes sha256/512 update functions so that "to_process"
respects sg limits and never tries to pass more data to
nx_build_sg_list() to avoid overflows. "to_process" is calculated
as minimum of "total" and sg limits at start of every iteration.
Fixes: 000851119e ("crypto: nx - Fix SHA concurrence issue and sg
limit bounds")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org
Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
Cc: Marcelo Henrique Cerri <mhcerri@linux.vnet.ibm.com>
Cc: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CTR hardware implementation does not match with kernel spec causing a counter bug
where just low 8 bytes are used for counter, when should be all 16bytes.
Since we already have other counter modes working according with specs
not worth to keep CTR itself on NX.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some VF drivers need FW const table, so the PF driver needs to load it.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add code specific for the dh895xcc virtual function.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add code that enables SRIOV on dh895xcc devices.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adf admin and HW arbiter function can be used by dh895xcc specific code
well as the new dh895xccvf and future devices so moving them to
qat_common so that they can be shared.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The probe error path for this driver, for all intents and purposes,
is the talitos_remove() function due to the common "goto err_out".
Without this patch applied, talitos_remove() will panic under these
two conditions:
1. If the RNG device hasn't been registered via
talitos_register_rng() prior to entry into talitos_remove(),
then the attempt to unregister the RNG "device" will cause a panic.
2. If the priv->chan array has not been allocated prior to entry
into talitos_remove(), then the per-channel FIFO cleanup will panic
because of the dereference of that NULL "array".
Both of the above scenarios occur if talitos_probe_irq() fails.
This patch resolves issue #1 by introducing a boolean to mask the
hwrng_unregister() call in talitos_unregister_rng() if RNG device
registration was unsuccessful.
It resolves issue #2 by checking that priv->chan is not NULL in the
per-channel FIFO cleanup for loop.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register only algorithms supported by CAAM hardware, using the CHA
version and instantiation registers to identify hardware capabilities.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow CAAM to be selected in the kernel for Freescale i.MX devices if
ARCH_MXC is enabled.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid moving the head of the scatterlist entry by using temporary
pointers to walk the scatterlist.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since fields must be ORed in to operate correctly using any order of
operations, changed allocations of the combination of extended
descriptor structs + hardware scatterlists to use kzalloc() instead
of kmalloc(), so as to ensure that residue data would not be ORed in
with the correct data.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the Scatter-Gather entry definitions for the Freescale
CAAM driver to include support for both 64- and 32-bit DMA pointers.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ARM-based systems may disable clocking to the CAAM device on the
Freescale i.MX platform for power management purposes. This patch
enables the required clocks when the CAAM module is initialized and
disables the required clocks when the CAAM module is shut down.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add set/clear 32-bit primitives for compatibility with ARM devices since
the primitives were previously only defined for the Power architecture.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Freescale i.MX6 ARM platforms do not support hardware cache coherency.
This patch adds cache coherency support to the CAAM driver.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts talitos to the new AEAD interface. IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts qat to the new AEAD interface. IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Tadeusz Struk <tadeusz.struk@intel.com>
This patch converts picoxcell to the new AEAD interface. IV
generation has been removed since it's equivalent to a software
implementation.
As picoxcell cannot handle SG lists longer than 16 elements,
this patch has made the software fallback mandatory. If an SG
list comes in that exceeds the limit, we will simply use the
fallback.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts ixp4xx to the new AEAD interface. IV generation
has been removed since it's a purely software implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the authenc implementations in caam to the
new AEAD interface. The biggest change is that seqiv no longer
generates a random IV. Instead the IPsec sequence number is used
as the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler
resulted in a failed build due to the anonymous union/structures
introduced in this commit:
crypto: talitos - enhanced talitos_desc struct for SEC1
The build error was:
drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer
drivers/crypto/talitos.h:56: warning: missing braces around initializer
drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>')
drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer
drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer
drivers/crypto/talitos.h:58: warning: excess elements in struct initializer
drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry')
make[2]: *** [drivers/crypto/talitos.o] Error 1
make[1]: *** [drivers/crypto] Error 2
make: *** [drivers] Error 2
This patch eliminates the errors by relying on the C standard's
implicit assignment of zero to static variables.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trival change, fix spelling mistake 'aquire' -> 'acquire' in
dev_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The encap shared descriptor was changed to use the new IV convention.
In the process some commands were shifted, making the output length
zero, caam effectively writing garbage in dst.
While here, update the decap descriptor to execute the "write" commands
before the "read"s (as it previously was).
This makes sure the input fifo is drained before becoming full.
Fixes: 46218750d5 ("crypto: caam - Use new IV convention")
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
One of the debug messages in the NX 842 PowerNV driver is missing
the required be32_to_cpu() wrapper when accessing the __be32 field
csb->count. Add the wrapper so the message will show the correct count.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return success instead of error if compression succeeds but the output is
larger than the input.
It's unlikely that the caller will use the compressed data since it's
larger than the original uncompressed data, but there was no error and
returning an error code is incorrect. Further, for testing small input
buffers, the output is likely to be larger than the input and success
needs to be returned to verify the test.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no need to iterate through the list for instances in the
accel_table since the number of devices is already known in this file.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The subject macro mistakenly compares the passed-in ring size in bytes
with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB)
rather than comparing with the intended value of 4096.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The element pci_dev_id in the struct adf_hw_device_data is redundant since
the PCI device id can be retrieved from the struct pci_dev.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the common 'platform' registration module, and move the crypto
compression driver registration into each of the pSeries and PowerNV
platform NX 842 drivers. Change the nx-842.c code into simple common
functions that each platform driver uses to perform constraints-based
buffer changes, i.e. realigning and/or resizing buffers to match the
driver's hardware requirements.
The common 'platform' module was my mistake to create - since each
platform driver will only load/operate when running on its own
platform (i.e. a pSeries platform or a PowerNV platform), they can
directly register with the crypto subsystem, using the same alg and
driver name. This removes unneeded complexity.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The last commit merged nx-842.c's code into nx-842-crypto.c. It
did not rename nx-842-crypto.c to nx-842.c, in order to let the
patch more clearly show what was merged. This just renames
nx-842-crypto.c to nx-842.c, with no changes to its code.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge the nx-842.c code into nx-842-crypto.c.
This allows later patches to remove the 'platform' driver, and instead
allow each platform driver to directly register with the crypto
compression api.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the duplicated finishing code (set destination buffer length and
set return code to 0) in the case of decompressing a buffer with no header
with a goto to the success case of decompressing a buffer with a header.
This is a trivial change that allows both success cases to use common code,
and includes the pr_debug() msg in both cases as well.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't register the pSeries driver when parsing the device tree returns
ENODEV.
The nx842_probe() function in the pSeries driver returns error instead
of registering as a crypto compression driver, when it receives an
error return value from the nx842_OF_upd() function that probes the
device tree nodes, except when ENODEV is returned. However ENODEV
should not be a special case and the driver should not register when
there is no hw device, or the hw device is disabled.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the kzalloc() calls in nx842_probe() and nx842_OF_upd() to the top
of the functions, before taking the devdata spinlock.
Since kzalloc() without GFP_ATOMIC can sleep, it can't be called while
holding a spinlock. Move the calls to before taking the lock.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the 'status' field from the pSeries NX driver data.
The 'status' field isn't used by the driver at all; it simply checks the
devicetree status node at initialization, and returns success if 'okay'
and failure otherwise.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the __init and __exit modifiers from the VIO driver probe and
remove functions.
The driver functions should not be marked __init/__exit because they
can/will be called during runtime, not only at module init and exit.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When multiple devices are present in the system the driver attempts
to register the same algorithm many times.
Changes in v2:
- use proper synchronization mechanizm between register and unregister
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes a bogus BUG_ON in the ablkcipher path that
triggers when the destination buffer is different from the source
buffer and is scattered.
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The synchronization method used atomic was bogus.
Use a proper synchronization with mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The condition checking allowed key length was invalid.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
An implicit truncation is done when using a variable of 64 bits
in MATH command:
warning: large integer implicitly truncated to unsigned type [-Woverflow]
Silence the compiler by feeding it with an explicit truncated value.
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When successful, the descriptor that performs RNG initialization
is allowed to return a status code of 7000_0000h, since last command
in the descriptor is a JUMP HALT.
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HW coherency won't work properly for CAAM write transactions
if AWCACHE is left to default (POR) value - 4'b0001.
It has to be programmed to 4'b0010, i.e. AXI3 Cacheable bit set.
For platforms that have HW coherency support:
-PPC-based: the update has no effect; CAAM coherency already works
due to the IOMMU (PAMU) driver setting the correct memory coherency
attributes
-ARM-based: the update fixes cache coherency issues,
since IOMMU (SMMU) driver is not programmed to behave similar to PAMU
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to ensure that the ERA property is properly read from DT
on all platforms, of_property_read* function needs to be used.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add RSA support to QAT driver.
Removed unused RNG rings.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Load Modular Math Processor(MMP) firmware into QAT devices to support
public key algorithm acceleration.
Signed-off-by: Pingchao Yang <pingchao.yang@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
vmx-crypto driver make use of some VSX instructions which are
only available if VSX is enabled. Running in cases where VSX
are not enabled vmx-crypto fails in a VSX exception.
In order to fix this enable_kernel_vsx() was added to turn on
VSX instructions for vmx-crypto.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts rfc4106 to the new calling convention where
the IV is now part of the AD and needs to be skipped.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts rfc4106 to the new calling convention where
the IV is now part of the AD and needs to be skipped. This patch
also makes use of type-safe AEAD functions where possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The transform context is shared memory and must not be written
to without locking. This patch adds locking to nx-842 to prevent
context corruption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use BIT()/GENMASK() macros for all register definitions instead of
hand-writing bit masks.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AES_CTRL_REG is used to configure AES mode. Before configuring
any mode we need to make sure all other modes are reset or else
driver will misbehave. So mask all modes before configuring
any AES mode.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increasing the priority of omap-aes hw algos, in order to take
precedence over sw algos.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Algo self tests are failing for CTR mode with omap-aes driver,
giving the following error:
[ 150.053644] omap_aes_crypt: request size is not exact amount of AES blocks
[ 150.061262] alg: skcipher: encryption failed on test 5 for ctr-aes-omap: ret=22
This is because the input length is not aligned with AES_BLOCK_SIZE.
Adding support for omap-aes driver for inputs with length not aligned
with AES_BLOCK_SIZE.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a host of reentrancy bugs in the nx driver. The
following algorithms are affected:
* CCM
* GCM
* CTR
* XCBC
* SHA256
* SHA512
The crypto API allows a single transform to be used by multiple
threads simultaneously. For example, IPsec will use a single tfm
to process packets for a given SA. As packets may arrive on
multiple CPUs that tfm must be reentrant.
The nx driver does try to deal with this by using a spin lock.
Unfortunately only the basic AES/CBC/ECB algorithms do this in
the correct way.
The symptom of these bugs may range from the generation of incorrect
output to memory corruption.
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While we never would successfully load on the wrong machine type, there
is extra output by default regardless of machine type.
For instance, on a PowerVM LPAR, we see the following:
nx_compress_powernv: loading
nx_compress_powernv: no coprocessors found
even though those coprocessors could never be found.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Dan Streetman <ddstreet@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the device-tree indicates the nx-842 device's status is 'disabled',
we emit two messages:
nx_compress_pseries ibm,compression-v1: nx842_OF_upd_status: status 'disabled' is not 'okay'.
nx_compress_pseries ibm,compression-v1: nx842_OF_upd: device disabled
Given that 'disabled' is a valid state, and we are going to emit that
the device is disabled, only print out a non-'okay' status if it is not
'disabled'.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While there is no technical reason that both nx-842.c and
nx-842-pseries.c can have the same name for the init/exit functions, it
is a bit confusing with initcall_debug. Rename the pseries specific
functions appropriately
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current documention mentions explicitly that EINVAL should be
returned if the device is not available, but nx842_OF_upd_status()
always returns 0. However, nx842_probe() specifically checks for
non-ENODEV returns from nx842_of_upd() (which in turn calls
nx842_OF_upd_status()) and emits an extra error in that case. It seems
like the proper return code of a disabled device is ENODEV.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the necessary module device tables to the platform support to allow
for autoloading of the CCP driver. This will allow for the CCP's hwrng
support to be available without having to manually load the driver. The
module device table entry for the pci support is already present.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_unmap_sg() is being called twice after completing the
task. Looks like this is a copy paste error when creating
des driver.
With this the following warn appears during boot:
[ 4.210457] ------------[ cut here ]------------
[ 4.215114] WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1080 check_unmap+0x710/0x9a0()
[ 4.222899] omap-des 480a5000.des: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000ab2ce000] [size=8 bytes]
[ 4.236785] Modules linked in:
[ 4.239860] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.39-02999-g1bc045a-dirty #182
[ 4.247918] [<c001678c>] (unwind_backtrace) from [<c0012574>] (show_stack+0x10/0x14)
[ 4.255710] [<c0012574>] (show_stack) from [<c05a37e8>] (dump_stack+0x84/0xb8)
[ 4.262977] [<c05a37e8>] (dump_stack) from [<c0046464>] (warn_slowpath_common+0x68/0x8c)
[ 4.271107] [<c0046464>] (warn_slowpath_common) from [<c004651c>] (warn_slowpath_fmt+0x30/0x40)
[ 4.279854] [<c004651c>] (warn_slowpath_fmt) from [<c02d50a4>] (check_unmap+0x710/0x9a0)
[ 4.287991] [<c02d50a4>] (check_unmap) from [<c02d5478>] (debug_dma_unmap_sg+0x90/0x19c)
[ 4.296128] [<c02d5478>] (debug_dma_unmap_sg) from [<c04a77d8>] (omap_des_done_task+0x1cc/0x3e4)
[ 4.304963] [<c04a77d8>] (omap_des_done_task) from [<c004a090>] (tasklet_action+0x84/0x124)
[ 4.313370] [<c004a090>] (tasklet_action) from [<c004a4ac>] (__do_softirq+0xf0/0x20c)
[ 4.321235] [<c004a4ac>] (__do_softirq) from [<c004a840>] (irq_exit+0x98/0xec)
[ 4.328500] [<c004a840>] (irq_exit) from [<c000f9ac>] (handle_IRQ+0x50/0xb0)
[ 4.335589] [<c000f9ac>] (handle_IRQ) from [<c0008688>] (gic_handle_irq+0x28/0x5c)
Removing the duplicate call to dma_unmap_sg().
Cc: stable@vger.kernel.org
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge third patchbomb from Andrew Morton:
- the rest of MM
- scripts/gdb updates
- ipc/ updates
- lib/ updates
- MAINTAINERS updates
- various other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
genalloc: rename of_get_named_gen_pool() to of_gen_pool_get()
genalloc: rename dev_get_gen_pool() to gen_pool_get()
x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit
MAINTAINERS: add zpool
MAINTAINERS: BCACHE: Kent Overstreet has changed email address
MAINTAINERS: move Jens Osterkamp to CREDITS
MAINTAINERS: remove unused nbd.h pattern
MAINTAINERS: update brcm gpio filename pattern
MAINTAINERS: update brcm dts pattern
MAINTAINERS: update sound soc intel patterns
MAINTAINERS: remove website for paride
MAINTAINERS: update Emulex ocrdma email addresses
bcache: use kvfree() in various places
libcxgbi: use kvfree() in cxgbi_free_big_mem()
target: use kvfree() in session alloc and free
IB/ehca: use kvfree() in ipz_queue_{cd}tor()
drm/nouveau/gem: use kvfree() in u_free()
drm: use kvfree() in drm_free_large()
cxgb4: use kvfree() in t4_free_mem()
cxgb3: use kvfree() in cxgb_free_mem()
...
To be consistent with other kernel interface namings, rename
of_get_named_gen_pool() to of_gen_pool_get(). In the original function
name "_named" suffix references to a device tree property, which contains
a phandle to a device and the corresponding device driver is assumed to
register a gen_pool object.
Due to a weak relation and to avoid any confusion (e.g. in future
possible scenario if gen_pool objects are named) the suffix is removed.
[sfr@canb.auug.org.au: crypto/marvell/cesa - fix up for of_get_named_gen_pool() rename]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately.
Thus the test around the calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- ACPICA update to upstream revision 20150515 including basic
support for ACPI 6 features: new ACPI tables introduced by
ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
other tables (DTRM, FADT, LPIT, MADT), new predefined names
(_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
fixes and cleanups (Bob Moore, Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation
in Windows (Rafael J Wysocki).
- Rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling
of DMI quirks that may be involved in that and to make the
code generally more straightforward (Hans de Goede).
- Fixes for the ACPI Embedded Controller (EC) driver related to
the handling of EC transactions (Lv Zheng).
- Fix for a regression related to the ACPI resources management
and resulting from a recent change of ACPI initialization code
ordering (Rafael J Wysocki).
- Fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the
code that switches the platform over to the ACPI mode too
early in the initialization sequence (Rafael J Wysocki).
- Support for the ACPI _CCA device configuration object related
to DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- Cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- Fix for a long-standing issue causing General Protection Faults
to be generated occasionally on return to user space after resume
from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- Fix to make the suspend core code return -EBUSY consistently in
all cases when system suspend is aborted due to wakeup detection
(Ruchi Kandoi).
- Support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- New tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- Wakeup sources framework enhancements (Jin Qian).
- New macro for noirq system PM callbacks (Grygorii Strashko).
- Assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should
reduce the overhead of these operations quite a bit, unless the
CPU in question is physically going away (Viresh Kumar, Saravana
Kannan).
- Serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- New Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- Updates for the common clock operations support code in the PM
core (Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- Fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- Runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=7jTj
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.2:
API:
- Convert RNG interface to new style.
- New AEAD interface with one SG list for AD and plain/cipher text.
All external AEAD users have been converted.
- New asymmetric key interface (akcipher).
Algorithms:
- Chacha20, Poly1305 and RFC7539 support.
- New RSA implementation.
- Jitter RNG.
- DRBG is now seeded with both /dev/random and Jitter RNG. If kernel
pool isn't ready then DRBG will be reseeded when it is.
- DRBG is now the default crypto API RNG, replacing krng.
- 842 compression (previously part of powerpc nx driver).
Drivers:
- Accelerated SHA-512 for arm64.
- New Marvell CESA driver that supports DMA and more algorithms.
- Updated powerpc nx 842 support.
- Added support for SEC1 hardware to talitos"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits)
crypto: marvell/cesa - remove COMPILE_TEST dependency
crypto: algif_aead - Temporarily disable all AEAD algorithms
crypto: af_alg - Forbid the use internal algorithms
crypto: echainiv - Only hold RNG during initialisation
crypto: seqiv - Add compatibility support without RNG
crypto: eseqiv - Offer normal cipher functionality without RNG
crypto: chainiv - Offer normal cipher functionality without RNG
crypto: user - Add CRYPTO_MSG_DELRNG
crypto: user - Move cryptouser.h to uapi
crypto: rng - Do not free default RNG when it becomes unused
crypto: skcipher - Allow givencrypt to be NULL
crypto: sahara - propagate the error on clk_disable_unprepare() failure
crypto: rsa - fix invalid select for AKCIPHER
crypto: picoxcell - Update to the current clk API
crypto: nx - Check for bogus firmware properties
crypto: marvell/cesa - add DT bindings documentation
crypto: marvell/cesa - add support for Kirkwood and Dove SoCs
crypto: marvell/cesa - add support for Orion SoCs
crypto: marvell/cesa - add allhwsupport module parameter
crypto: marvell/cesa - add support for all armada SoCs
...
Pull x86 FPU updates from Ingo Molnar:
"This tree contains two main changes:
- The big FPU code rewrite: wide reaching cleanups and reorganization
that pulls all the FPU code together into a clean base in
arch/x86/fpu/.
The resulting code is leaner and faster, and much easier to
understand. This enables future work to further simplify the FPU
code (such as removing lazy FPU restores).
By its nature these changes have a substantial regression risk: FPU
code related bugs are long lived, because races are often subtle
and bugs mask as user-space failures that are difficult to track
back to kernel side backs. I'm aware of no unfixed (or even
suspected) FPU related regression so far.
- MPX support rework/fixes. As this is still not a released CPU
feature, there were some buglets in the code - should be much more
robust now (Dave Hansen)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits)
x86/fpu: Fix double-increment in setup_xstate_features()
x86/mpx: Allow 32-bit binaries on 64-bit kernels again
x86/mpx: Do not count MPX VMAs as neighbors when unmapping
x86/mpx: Rewrite the unmap code
x86/mpx: Support 32-bit binaries on 64-bit kernels
x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps
x86/mpx: Introduce new 'directory entry' to 'addr' helper function
x86/mpx: Add temporary variable to reduce masking
x86: Make is_64bit_mm() widely available
x86/mpx: Trace allocation of new bounds tables
x86/mpx: Trace the attempts to find bounds tables
x86/mpx: Trace entry to bounds exception paths
x86/mpx: Trace #BR exceptions
x86/mpx: Introduce a boot-time disable flag
x86/mpx: Restrict the mmap() size check to bounds tables
x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK
x86/mpx: Clean up the code by not passing a task pointer around when unnecessary
x86/mpx: Use the new get_xsave_field_ptr()API
x86/fpu/xstate: Wrap get_xsave_addr() to make it safer
x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions
...
Pull scheduler updates from Ingo Molnar:
"The main changes are:
- lockless wakeup support for futexes and IPC message queues
(Davidlohr Bueso, Peter Zijlstra)
- Replace spinlocks with atomics in thread_group_cputimer(), to
improve scalability (Jason Low)
- NUMA balancing improvements (Rik van Riel)
- SCHED_DEADLINE improvements (Wanpeng Li)
- clean up and reorganize preemption helpers (Frederic Weisbecker)
- decouple page fault disabling machinery from the preemption
counter, to improve debuggability and robustness (David
Hildenbrand)
- SCHED_DEADLINE documentation updates (Luca Abeni)
- topology CPU masks cleanups (Bartosz Golaszewski)
- /proc/sched_debug improvements (Srikar Dronamraju)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
sched: Remove superfluous resetting of the p->dl_throttled flag
sched/deadline: Drop duplicate init_sched_dl_class() declaration
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
sched/deadline: Make init_sched_dl_class() __init
sched/deadline: Optimize pull_dl_task()
sched/preempt: Add static_key() to preempt_notifiers
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
sched/debug: Properly format runnable tasks in /proc/sched_debug
sched/numa: Only consider less busy nodes as numa balancing destinations
Revert 095bebf61a ("sched/numa: Do not move past the balance point if unbalanced")
sched/fair: Prevent throttling in early pick_next_task_fair()
preempt: Reorganize the notrace definitions a bit
preempt: Use preempt_schedule_context() as the official tracing preemption point
sched: Make preempt_schedule_context() function-tracing safe
x86: Remove cpu_sibling_mask() and cpu_core_mask()
x86: Replace cpu_**_mask() with topology_**_cpumask()
...
The CESA driver calls phys_to_virt() which is not available on all
architectures.
Remove the depency on COMPILE_TEST to prevent building this driver on
non ARM architectures.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The picoXcell hardware crypto accelerator driver was using an
older version of the clk framework, and not (un)preparing the
clock before enabling/disabling it. This change uses the handy
clk_prepare_enable function to interact with the current clk
framework correctly.
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nx driver reads two crucial paramters from the firmware for
each crypto algorithm, the maximum SG list length and byte limit.
Unfortunately those two parameters may be bogus, or worse they
may be absent altogether. When this happens the algorithms will
still register successfully but will fail when used or tested.
This patch adds checks to report any firmware entries which are
found to be bogus, and avoid registering algorithms which have
bogus parameters. A warning is also printed when an algorithm
is not registered because of this as there may have been no firmware
entries for it at all.
Reported-by: Ondrej Moriš <omoris@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the Kirkwood and Dove SoC descriptions, and control the allhwsupport
module parameter to avoid probing the CESA IP when the old CESA driver is
enabled (unless it is explicitly requested to do so).
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the Orion SoC description, and select this implementation by default
to support non-DT probing: Orion is the only platform where non-DT boards
are declaring the CESA block.
Control the allhwsupport module parameter to avoid probing the CESA IP when
the old CESA driver is enabled (unless it is explicitly requested to do
so).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The old and new marvell CESA drivers both support Orion and Kirkwood SoCs.
Add a module parameter to choose whether these SoCs should be attached to
the new or the old driver.
The default policy is to keep attaching those IPs to the old driver if it
is enabled, until we decide the new CESA driver is stable/secure enough.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CESA IP description for all the missing armada SoCs (XP, 375 and 38x).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for SHA256 operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for MD5 operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Triple-DES operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for DES operations.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CESA IP supports CPU offload through a dedicated DMA engine (TDMA)
which can control the crypto block.
When you use this mode, all the required data (operation metadata and
payload data) are transferred using DMA, and the results are retrieved
through DMA when possible (hash results are not retrieved through DMA yet),
thus reducing the involvement of the CPU and providing better performances
in most cases (for small requests, the cost of DMA preparation might
exceed the performance gain).
Note that some CESA IPs do not embed this dedicated DMA, hence the
activation of this feature on a per platform basis.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing mv_cesa driver supports some features of the CESA IP but is
quite limited, and reworking it to support new features (like involving the
TDMA engine to offload the CPU) is almost impossible.
This driver has been rewritten from scratch to take those new features into
account.
This commit introduce the base infrastructure allowing us to add support
for DMA optimization.
It also includes support for one hash (SHA1) and one cipher (AES)
algorithm, and enable those features on the Armada 370 SoC.
Other algorithms and platforms will be added later on.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We are about to add a new driver to support new features like using the
TDMA engine to offload the CPU.
Orion, Dove and Kirkwood platforms are already using the mv_cesa driver,
but Orion SoCs do not embed the TDMA engine, which means we will have to
differentiate them if we want to get TDMA support on Dove and Kirkwood.
In the other hand, the migration from the old driver to the new one is not
something all people are willing to do without first auditing the new
driver.
Hence we have to support the new compatible in the mv_cesa driver so that
new platforms with updated DTs can still attach their crypto engine device
to this driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa driver currently expects the SRAM memory region to be passed
as a platform device resource.
This approach implies two drawbacks:
- the DT representation is wrong
- the only one that can access the SRAM is the crypto engine
The last point is particularly annoying in some cases: for example on
armada 370, a small region of the crypto SRAM is used to implement the
cpuidle, which means you would not be able to enable both cpuidle and the
CESA driver.
To address that problem, we explicitly define the SRAM device in the DT
and then reference the sram node from the crypto engine node.
Also note that the old way of retrieving the SRAM memory region is still
supported, or in other words, backward compatibility is preserved.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f38 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.
Add support to the nx-842-pseries.c driver for running in little endian
mode.
The pSeries platform NX 842 driver currently only works as big endian.
This adds cpu_to_be*() and be*_to_cpu() in the appropriate places to
work in LE mode also.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The new aead_edesc_alloc left out the bit indicating the last
entry on the source SG list. This patch fixes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I incorrectly removed DESC_MAX_USED_BYTES when enlarging the size
of the shared descriptor buffers, thus making it four times larger
than what is necessary. This patch restores the division by four
calculation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Crash in caam hash due to uninitialised buffer lengths.
- Alignment issue in caam RNG that may lead to non-random output"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix RNG buffer cache alignment
crypto: caam - improve initalization for context state saves
This patch fixes a number of problems in crypto driver Kconfig
entries:
1. Select BLKCIPHER instead of BLKCIPHER2. The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch
crypto: caam - Add definition of rd/wr_reg64 for little endian platform
added support for little endian platforms to the CAAM driver. Namely a
write and read function for 64 bit registers.
The only user of this functions is the Job Ring driver (drivers/crypto/caam/jr.c).
It uses the functions to set the DMA addresses for the input/output rings.
However, at least in the default configuration, the least significant 32 bits are
always in the base+0x0004 address; independent of the endianness of the bytes itself.
That means the addresses do not change with the system endianness.
DMA addresses are only 32 bits wide on non-64-bit systems, writing the upper 32 bits
of this value to the register for the least significant bits results in the DMA address
being set to 0.
Fix this by always writing the registers in the same way.
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the caam GCM implementations to the new AEAD
interface. This is compile-tested only.
Note that all IV generation for GCM algorithms have been removed.
The reason is that the current generation uses purely random IVs
which is not appropriate for counter-based algorithms where we
first and foremost require uniqueness.
Of course there is no reason why you couldn't implement seqiv or
seqniv within caam since all they do is xor the sequence number
with a salt, but since I can't test this on actual hardware I'll
leave it alone for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently dma_map_sg_chained does not handle errors from the
underlying dma_map_sg calls. This patch adds rollback in case
of an error by simply calling dma_unmap_sg_chained for the ones
that we've already mapped.
All current callers ignore the return value so this should have
no impact on them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the nx GCM implementations to the new AEAD
interface. This is compile-tested only.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a "Trying to vfree() nonexistent vm area" error when unloading the CAAM
controller module by providing the correct pointer value to iounmap().
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver uses two data buffers to store data for a hashing operation,
with one buffer defined as active. This change forces switching of the
active buffer when executing a hashing operation to avoid a later DMA unmap
using the length of the opposite buffer.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The top-level CRYPTO_DEV_VMX option already depends on PPC64 so
there is no need to depend on it again at CRYPTO_DEV_VMX_ENCRYPT.
This patch also removes a redundant "default n".
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx)
allocated in one DMA-tagged region. While the kernel's heap allocator
should place the overall struct on a cacheline aligned boundary, the 2
buffers contained within may not necessarily align. Consenquently, the ends
of unaligned buffers may not fully flush, and if so, stale data will be left
behind, resulting in small repeating patterns.
This fix aligns the buffers inside the struct.
Note that not all of the data inside caam_rng_ctx necessarily needs to be
DMA-tagged, only the buffers themselves require this. However, a fix would
incur the expense of error-handling bloat in the case of allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the driver has separate logic to determine device coherency
for DT vs ACPI. This patch simplifies the code with a call to
device_dma_is_coherent().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the NX842_MEM_COMPRESS define with a function that returns the
specific platform driver's required working memory size.
The common nx-842.c driver refuses to load if there is no platform
driver present, so instead of defining an approximate working memory
size that's the maximum approximate size of both platform driver's
size requirements, the platform driver can directly provide its
specific, i.e. sizeof(struct nx842_workmem), size requirements which
the 842-nx crypto compression driver will use.
This saves memory by both reducing the required size of each driver
to the specific sizeof() amount, as well as using the specific loaded
platform driver's required amount, instead of the maximum of both.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the contents of the include/linux/nx842.h header file into the
drivers/crypto/nx/nx-842.h header file. Remove the nx842.h header
file and its entry in the MAINTAINERS file.
The include/linux/nx842.h header originally was there because the
crypto/842.c driver needed it to communicate with the nx-842 hw
driver. However, that crypto compression driver was moved into
the drivers/crypto/nx/ directory, and now can directly include the
nx-842.h header. Nothing else needs the public include/linux/nx842.h
header file, as all use of the nx-842 hardware driver will be through
the "842-nx" crypto compression driver, since the direct nx-842 api is
very limited in the buffer alignments and sizes that it will accept,
and the crypto compression interface handles those limitations and
allows any alignment and size buffers.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the driver assumes that the SG list contains exactly
the number of bytes required. This assumption is incorrect.
Up until now this has been harmless. However with the new AEAD
interface this now breaks as the AD SG list contains more bytes
than just the AD.
This patch fixes this by always clamping the AD SG list by the
specified AD length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes use of the new sg_nents_for_len helper to replace
the custom sg_count function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver uses SZ_64K so it should include linux/sizes.h rather
than relying on others to pull it in for it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently caam assumes that the SG list contains exactly the number
of bytes required. This assumption is incorrect.
Up until now this has been harmless. However with the new AEAD
interface this now breaks as the AD SG list contains more bytes
than just the AD.
This patch fixes this by always clamping the AD SG list by the
specified AD length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes an issue when building an internal AD representation.
We need to check assoclen and not only blindly loop over assoc sgl.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device doensn't support the default value and will change it to 256, which
will cause performace degradation for biger packets.
Add an explicit write to set it to 1024.
Reported-by: Tianliang Wang <tianliang.wang@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reduce the nx-842 pSeries driver minimum buffer size from 128 to 8.
Also replace the single use of IO_BUFFER_ALIGN macro with the standard
and correct DDE_BUFFER_ALIGN.
The hw sometimes rejects buffers that contain padding past the end of the
8-byte aligned section where it sees the "end" marker. With the minimum
buffer size set too high, some highly compressed buffers were being padded
and the hw was incorrectly rejecting them; this sets the minimum correctly
so there will be no incorrect padding.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Scatter gather lists can be created with more available entries than are
actually used (e.g. using sg_init_table() to reserve a specific number
of sg entries, but in actuality using something less than that based on
the data length). The caller sometimes fails to mark the last entry
with sg_mark_end(). In these cases, sg_nents() will return the original
size of the sg list as opposed to the actual number of sg entries that
contain valid data.
On arm64, if the sg_nents() value is used in a call to dma_map_sg() in
this situation, then it causes a BUG_ON in lib/swiotlb.c because an
"empty" sg list entry results in dma_capable() returning false and
swiotlb trying to create a bounce buffer of size 0. This occurred in
the userspace crypto interface before being fixed by
0f477b655a ("crypto: algif - Mark sgl end at the end of data")
Protect against this by using the new sg_nents_for_len() function which
returns only the number of sg entries required to meet the desired
length and supplying that value to dma_map_sg().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the nx-842 common driver to wait for loading of both platform
drivers, and fail loading if the platform driver pointer is not set.
Add an independent platform driver pointer, that the platform drivers
set if they find they are able to load (i.e. if they find their platform
devicetree node(s)).
The problem is currently, the main nx-842 driver will stay loaded even
if there is no platform driver and thus no possible way it can do any
compression or decompression. This allows the crypto 842-nx driver
to load even if it won't actually work. For crypto compression users
(e.g. zswap) that expect an available crypto compression driver to
actually work, this is bad. This patch fixes that, so the 842-nx crypto
compression driver won't load if it doesn't have the driver and hardware
available to perform the compression.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the length field from the ccp_sg_workarea since it is unused.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The underlying device support will set the device dma_mask pointer
if DMA is set up properly for the device. Remove the check for and
assignment of dma_mask when it is null. Instead, just error out if
the dma_set_mask_and_coherent function fails because dma_mask is null.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa driver does not request the CESA registers memory region.
Since we're about to add a new CESA driver, we need to make sure only one
of these drivers probe the CESA device, and requesting the registers memory
region is a good way to achieve that.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto layer already checks maxauthsize when setauthsize is
called. So there is no need to check it again within setauthsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We already have fpu/types.h, move i387.h to fpu/api.h.
The file name has become a misnomer anyway: it offers generic FPU APIs,
but is not limited to i387 functionality.
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
omap3 support is same as omap2, just with different IO address (specified in DT)
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the null checks for tfm, src, slen, dst, dlen; tfm will never
be null and the other fields are always expected to be set correctly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
One mistyped description and another mistyped target were corrected.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function pm_runtime_get_sync could fail and we need to check return
value to prevent kernel crash.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-change req_ctx->nbuf from u64 to unsigned int to silence checker
warnings; this is safe since nbuf value is <= HASH_MAX_BLOCK_SIZE
-remove unused value read from TALITOS_CCPSR; there is no requirement
to read upper 32b before reading lower 32b of a 64b register;
SEC RM mentions: "reads can always be done by byte, word, or dword"
-remove unused return value of sg_to_link_tbl()
-change "len" parameter of map_single_talitos_ptr() and
to_talitos_ptr_len() to unsigned int; later, cpu_to_be16 will __force
downcast the value to unsigned short without any checker warning
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check return value of scatterlist_sg_next(), i.e. don't rely solely
on number of bytes to be processed or number of scatterlist entries.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 7291a932c6.
The conversion to be16_add_cpu() is incorrect in case cryptlen is
negative due to premature (i.e. before addition / subtraction)
implicit conversion of cryptlen (int -> u16) leading to sign loss.
Cc: <stable@vger.kernel.org> # 3.10+
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: <stable@vger.kernel.org> # 3.2+
Fixes: 1d11911a8c ("crypto: talitos - fix warning: 'alg' may be used uninitialized in this function")
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The + operation has higher precedence than ?: so we need parentheses
here. Otherwise we may end up allocating a max of only one "cryptlen"
instead of two.
Fixes: 6f65f6ac5f ('crypto: talitos - implement scatter/gather copy for SEC1')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crt_aead is an internal implementation detail and must not be
used outside of the crypto API itself. This patch replaces the
unnecessary uses of crt_aead with crypto_aead_ivsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto compression alg for 842 hardware compression and decompression,
using the alg name "842" and driver_name "842-nx".
This uses only the PowerPC coprocessor hardware for 842 compression. It
also uses the hardware for decompression, but if the hardware fails it will
fall back to the 842 software decompression library, so that decompression
never fails (for valid 842 compressed buffers). A header must be used in
most cases, due to the hardware's restrictions on the buffers being
specifically aligned and sized.
Due to the header this driver adds, compressed buffers it creates cannot be
directly passed to the 842 software library for decompression. However,
compressed buffers created by the software 842 library can be passed to
this driver for hardware 842 decompression (with the exception of buffers
containing the "short data" template, as lib/842/842.h explains).
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the pSeries NX-842 driver: do not expect incoming buffers to be
exactly page-sized; do not break up input buffers to compress smaller
blocks; do not use any internal headers in the compressed data blocks;
remove the software decompression implementation; implement the pSeries
nx842_constraints.
This changes the pSeries NX-842 driver to perform constraints-based
compression so that it only needs to compress one entire input block at a
time. This removes the need for it to split input data blocks into
multiple compressed data sections in the output buffer, and removes the
need for any extra header info in the compressed data; all that is moved
(in a later patch) into the main crypto 842 driver. Additionally, the
842 software decompression implementation is no longer needed here, as
the crypto 842 driver will use the generic software 842 decompression
function as a fallback if any hardware 842 driver fails.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add driver for NX-842 hardware on the PowerNV platform.
This allows the use of the 842 compression hardware coprocessor on
the PowerNV platform.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add "constraints" for the NX-842 driver. The constraints are used to
indicate what the current NX-842 platform driver is capable of. The
constraints tell the NX-842 user what alignment, min and max length, and
length multiple each provided buffers should conform to. These are
required because the 842 hardware requires buffers to meet specific
constraints that vary based on platform - for example, the pSeries
max length is much lower than the PowerNV max length.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add NX-842 frontend that allows using either the pSeries platform or
PowerNV platform driver (to be added by later patch) for the NX-842
hardware. Update the MAINTAINERS file to include the new filenames.
Update Kconfig files to clarify titles and descriptions, and correct
dependencies.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the entire NX-842 driver for the pSeries platform from the file
nx-842.c to nx-842-pseries.c. This is required by later patches that
add NX-842 support for the PowerNV platform.
This patch does not alter the content of the pSeries NX-842 driver at
all, it only changes the filename.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use ADF_DH895XCC_FW instead of duplicating the string "qat_895xcc.bin"
when referring to the DH895xCC firmware.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This push fixes a build problem with img-hash under non-standard
configurations and a serious regression with sha512_ssse3 which can
lead to boot failures"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA
crypto: x86/sha512_ssse3 - fixup for asm function prototype change
Bug happens when a data size less than SHA block size is passed.
Since first attempt will be saved in buffer, second round attempt
get into two step to calculate op.inlen and op.outlen. The issue
resides in this step. A wrong value of op.inlen and outlen was being
calculated.
This patch fix this eliminate the nx_sha_build_sg_list, that is
useless in SHA's algorithm context. Instead we call nx_build_sg_list
directly and pass a previous calculated max_sg_len to it.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In NX we need to pass always a 16 multiple size nx_sg_list to
co processor. Trim function handle with this assuring all nx_sg_lists
are 16 multiple size, although data was not being considerated when
crop was done. It was causing an unalignment between size of the list
and data, corrupting csbcpb fields returning a -23 H_ST_PARM error, or
invalid operation.
This patch fix this recalculating how much data should be put back
in to_process variable what assures the size of sg_list will be
correct with size of the data.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If NO_DMA=y:
drivers/built-in.o: In function `img_hash_write_via_dma_stop':
img-hash.c:(.text+0xa2b822): undefined reference to `dma_unmap_sg'
drivers/built-in.o: In function `img_hash_xmit_dma':
img-hash.c:(.text+0xa2b8d8): undefined reference to `dma_map_sg'
img-hash.c:(.text+0xa2b948): undefined reference to `dma_unmap_sg'
Also move the "depends" section below the "tristate" line while we're at
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The caam driver includes algorithm types that it doesn't even
use, such as struct rng_alg which has recently been moved to an
internal header file and consequently broke the build of caam.
This patch removes these bogus references.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We add a specific compatible for SEC1, to handle the differences
between SEC1 and SEC2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 bugs on 0 data hash, so we submit an already padded block representing 0 data
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 doesn't support scatter/gather, SEC1 doesn't handle link tables.
Therefore, for SEC1 we have to do it by SW. For that, we reserve
space at the end of the extended descriptor, in lieu of the space
reserved for the link tables on SEC2, and we perform sg_copy() when
preparing the descriptors
We also adapt the max buffer size which is only 32k on SEC1 while it
is 64k on SEC2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adapts the interrupts handling and reset function for
SEC1. On SEC1, registers are almost similar to SEC2+, but bits
are sometimes located at different places. So we need to define
TALITOS1 and TALITOS2 versions of some fields, and manage according
to whether it is SEC1 or SEC2.
On SEC1, only one interrupt vector is dedicated to the SEC, so only
interrupt_4ch is needed.
On SEC1, interrupts are enabled by clearing related bits in IMR,
while on SEC2, interrupts are enabled by seting the bits in IMR.
SEC1 also performs parity verification in the DES Unit. We have
to disable this feature because the test vectors provided in
the kernel have parity errors.
In reset functions, only SEC2 supports continuation after error.
For SEC1, we have to reset in all cases.
For errors handling, SEC2+ names have been kept, but displayed
text have been amended to reflect exact meaning on SEC1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC 1.0, 1.2 and 2.x+ have different EU base addresses, so we need to
define pointers for each EU in the driver private data structure.
The proper address is set by the probe function depending on the
SEC type, in order to provide access to the proper address.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 descriptor is a bit different to SEC2+ descriptor.
talitos_submit() will have to copy hdr field into hdr1 field and
send the descriptor starting at hdr1 up to next_desc.
For SEC2, it remains unchanged and next_desc is just ignored.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
talitos descriptor is slightly different for SEC1 and SEC2+, so
lets the helper function that fills the descriptor take into account
the type of SEC.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We add a new feature in the features field, to mark compatible
"fsl,sec1.0"
We also define a helper function called has_ftr_sec1() to help
functions quickly determine if they are running on SEC1 or SEC2+.
When only SEC1 or SEC2 is compiled in, has_ftr_sec1() return
trivial corresponding value. If both are compiled in, feature
field is checked.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a CONFIG option to select SEC1, SEC2+ or both.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enhances the talitos_desc struct with fields for SEC1.
SEC1 has only one header field, and has a 'next_desc' field in
addition.
This mixed descriptor will continue to fit SEC2, and for SEC1
we will recopy hdr value into hdr1 value in talitos_submit()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a helper function for reads and writes of the len
param of the talitos descriptor. This will help implement
SEC1 later.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
map_single_talitos_ptr() is always called with extent == 0, so lets remove this unused parameter
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
j_extent field is specific to SEC2 so we add a helper function to clear it
so that SEC1 can redefine that function as nop
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linux CodyingStyle recommends to use short variables for local
variables. ptr is just good enough for those 3 lines functions.
It helps keep single lines shorter than 80 characters.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch refactors the handling of the input and output data that is quite
similar in several functions
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do use zero_entry value to init the descriptors ptrs to zero instead of
writing 0 in each field
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
backlog is not initialised so in the case where
cpg->eng_st != ENGINE_IDLE it is never initialised and
hence which could lead to an illegal memory dereference
in the statement:
backlog->complete(backlog, -EINPROGRESS);
Discovered with cppcheck static analsys:
[drivers/crypto/mv_cesa.c:616]:
(error) Uninitialized variable: backlog
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
functions, prompted by their mis-use in staging.
With these function removed, all cpu functions should only iterate to
nr_cpu_ids, so we finally only allocate that many bits when cpumasks
are allocated offstack.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VAgA
-----END PGP SIGNATURE-----
Merge tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell:
"This is the final removal (after several years!) of the obsolete
cpus_* functions, prompted by their mis-use in staging.
With these function removed, all cpu functions should only iterate to
nr_cpu_ids, so we finally only allocate that many bits when cpumasks
are allocated offstack"
* tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
cpumask: remove __first_cpu / __next_cpu
cpumask: resurrect CPU_MASK_CPU0
linux/cpumask.h: add typechecking to cpumask_test_cpu
cpumask: only allocate nr_cpumask_bits.
Fix weird uses of num_online_cpus().
cpumask: remove deprecated functions.
mips: fix obsolete cpumask_of_cpu usage.
x86: fix more deprecated cpu function usage.
ia64: remove deprecated cpus_ usage.
powerpc: fix deprecated CPU_MASK_CPU0 usage.
CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region.
staging/lustre/o2iblnd: Don't use cpus_weight
staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
blackfin: fix up obsolete cpu function usage.
parisc: fix up obsolete cpu function usage.
tile: fix up obsolete cpu function usage.
arm64: fix up obsolete cpu function usage.
mips: fix up obsolete cpu function usage.
x86: fix up obsolete cpu function usage.
...
The AES implementation still assumes, that the hw_desc[0] has a valid
key as long as no new key needs to be set; consequentialy it always
sets the AES key header for the first descriptor and puts data into
the second one (hw_desc[1]).
Change this to only update the key in the hardware, when a new key is
to be set and use the first descriptor for data otherwise.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With commit
7e77bdebff crypto: af_alg - fix backlog handling
in place, the backlog works under all circumstances where it previously failed, atleast
for the sahara driver. Use it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The output buffer is used for CPU access, so
the API should be dma_sync_single_for_cpu which
makes the cache line invalid in order to reload
the value in memory.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The input buffer and output buffer are mapped for DMA transfer
in Atmel AES driver. But they are also be used by CPU when
the requested crypt length is not bigger than the threshold
value 16. The buffers will be cached in cache line when CPU
accessed them. When DMA uses the buffers again, the memory
can happened to be flushed by cache while DMA starts transfer.
So using API dma_sync_single_for_device and dma_sync_single_for_cpu
in DMA to ensure DMA coherence and CPU always access the correct
value. This fix the issue that the encrypted result periodically goes
wrong when doing performance test with OpenSSH.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel will report "BUG: spinlock lockup suspected on CPU#0"
when CONFIG_DEBUG_SPINLOCK is enabled in kernel config and the
spinlock is used at the first time. It's caused by uninitialized
spinlock, so just initialize it in probe.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel will report "BUG: spinlock lockup suspected on CPU#0"
when CONFIG_DEBUG_SPINLOCK is enabled in kernel config and the
spinlock is used at the first time. It's caused by uninitialized
spinlock, so just initialize it in probe.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The maximum source and destination burst size is 16
according to the datasheet of Atmel DMA. And the value
is also checked in function at_xdmac_csize of Atmel
DMA driver. With the restrict, the value beyond maximum
value will not be processed in DMA driver, so SHA384 and
SHA512 will not work and the program will wait forever.
So here change the max burst size of all the cases to 16
in order to make SHA384 and SHA512 work and keep consistent
with DMA driver and datasheet.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel will report "BUG: spinlock lockup suspected on CPU#0"
when CONFIG_DEBUG_SPINLOCK is enabled in kernel config and the
spinlock is used at the first time. It's caused by uninitialized
spinlock, so just initialize it in probe.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Having a zero length sg doesn't mean it is the end of the sg list. This
case happens when calculating HMAC of IPSec packet.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a hash is requested on data bigger than the buffer allocated by the
SHA driver, the way DMA transfers are performed is quite strange:
The buffer is filled at each update request. When full, a DMA transfer
is done. On next update request, another DMA transfer is done. Then we
wait to have a full buffer (or the end of the data) to perform the dma
transfer. Such a situation lead sometimes, on SAMA5D4, to a case where
dma transfer is finished but the data ready irq never comes. Moreover
hash was incorrect in this case.
With this patch, dma transfers are only performed when the buffer is
full or when there is no more data. So it removes the transfer whose size
is equal the update size after the full buffer transmission.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new version of atmel-sha available with SAMA5D4 devices.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new version of atmel-aes available with SAMA5D4 devices.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
release_firmware was called twice on error path causing an Oops.
Reported-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ring name was allocated but never refenenced.
It was supposed to be printed out in debug output.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kmap_atomic() gives only the page address of the input page.
Driver should take care of adding the offset of the scatterlist
within the page to the returned page address.
omap-sham driver is not adding the offset to page and directly operates
on the return vale of kmap_atomic(), because of which the following
error comes when running crypto tests:
00000000: d9 a1 1b 7c aa 90 3b aa 11 ab cb 25 00 b8 ac bf
[ 2.338169] 00000010: c1 39 cd ff 48 d0 a8 e2 2b fa 33 a1
[ 2.344008] alg: hash: Chunking test 1 failed for omap-sha256
So adding the scatterlist offset to vaddr.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ERROR:CODE_INDENT: code indent should use tabs where possible
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written
"!device_reset_wq"
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CHECK:BIT_MACRO: Prefer using the BIT macro
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CHECK:CONCATENATED_STRING: Concatenated strings should use spaces between
elements
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cleanup code to fix the subject checkpatch warnings
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For cases where total length of an input SGs is not same as
length of the input data for encryption, omap-aes driver
crashes. This happens in the case when IPsec is trying to use
omap-aes driver.
To avoid this, we copy all the pages from the input SG list
into a contiguous buffer and prepare a single element SG list
for this buffer with length as the total bytes to crypt, which is
similar thing that is done in case of unaligned lengths.
Fixes: 6242332ff2 ("crypto: omap-aes - Add support for cases of unaligned lengths")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
omap_sham_handle_queue() can be called as part of done_task tasklet.
During this its atomic and any calls to pm functions cannot sleep.
But there is a call to pm_runtime_get_sync() (which can sleep) in
omap_sham_handle_queue(), because of which the following appears:
" [ 116.169969] BUG: scheduling while atomic: kworker/0:2/2676/0x00000100"
Add pm_runtime_irq_safe() to avoid this.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"hdev->req->nbytes" is an unsigned int so we so we lose the upper 3 bits
to the shift wrap bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GCC complains about that %u is the wrong format string for size_t and
also that "ret" is unused.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert pr_info() and pr_err() log messages to dev_info() and dev_err(),
respectively, where able. This adds the module name and PCI B:D:F to
indicate which QAT device generated the log message. The "QAT:" is removed
from these log messages as that is now unnecessary. A few of these log
messages have additional spelling/contextual fixes.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This define is a duplicate of the one in ./include/linux/pci_ids.h
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig entry for CRYPTO_DEV_IMGTEC_HASH incorrectly selects
CRYPTO_SHA224, which does not exist (and is covered by CRYPTO_SHA256
which covers both 224 and 256). Remove it.
Also correct typo CRYPTO_ALG_API to be CRYPTO_ALGPI.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: img-hash - Add missing semicolon to fix build error
There is a missing semicolon after MODULE_DEVICE_TABLE.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds support for the Imagination Technologies hash accelerator which
provides hardware acceleration for SHA1 SHA224 SHA256 and MD5 hashes.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: vmx - Fix assembler perl to use _GLOBAL
Rather than doing things by hand for global symbols to deal with
different calling conventions we already have a macro _GLOBAL in
Linux to handle this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Even if bus is not hot-pluggable, the devices can be bound and unbound
from the driver via sysfs, so we should not be using __init/__exit
annotations on probe() and remove() methods. The only exception is
drivers registered with platform_driver_probe() which specifically
disables sysfs bind/unbind attributes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PCI bus is hot-pluggable, and even if it wasn't one can still unbind the
device from driver via sysfs, so we should not make driver's remove
method as __exit.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7e933d3b1e ("crypto: ux500: use dmaengine_prep_slave_sg
API") changed the code to use the new API, but forgot to update an error
message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is properly defined in the md5 header file.
Signed-off-by: Martin Hicks <mort@bork.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There were multiple loops in a row, for each separate step of the
initialization of the channels. Simplify to a single loop.
Signed-off-by: Martin Hicks <mort@bork.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks to spatch, plus manual removal of "&*". Then a sweep for
for_each_cpu_mask => for_each_cpu.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: netdev@vger.kernel.org
Fix typo, "intialization" -> "initialization"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All possible code-paths will assign ret to suitable values so this
default value is not needed.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A failure of sahara_hw_descriptor_create() with -EINVAL due to scatter list
out of bounds/invalid would not be reported back. This patch just passes on
the -EINVAL so it is visible in sahara_queue_manage().
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
return type of wait_for_completion_timeout is unsigned long not int, this
patch adds appropriate variables of type unsigned long.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
return type of wait_for_completion_timeout is unsigned long not int, this
patch changes the type of ret from int to unsigned long.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enables VMX module in PPC64.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OpenSSL implements optimized ASM algorithms which support
VMX instructions on Power 8 CPU.
These scripts generate an endian-agnostic ASM implementation
in order to support both big and little-endian.
- aesp8-ppc.pl: implements suport for AES instructions
implemented by POWER8 processor.
- ghashp8-ppc.pl: implements support for GHASH for Power8.
- ppc-xlate.pl: ppc assembler distiller.
These code has been adopted from OpenSSL project in collaboration
with the original author (Andy Polyakov <appro@openssl.org>).
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds GHASH routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds AES CTR routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds AES CBC routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds AES routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds routines supporting VMX instructions on the
Power 8.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for ACPI to the CCP platform driver.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Where applicable, convert calls to their devm_ counterparts, e.g. kzalloc
to devm_kzalloc.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the setting of the DMA masks with the dma_set_mask_and_coherent
function call.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add HAS_IOMEM as a Kconfig dependency. Always include ccp-platform.c
in the CCP build and conditionally include ccp-pci.c.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Changes to address warnings and errors reported by the checkpatch
script.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull dmaengine updates from Vinod Koul:
"This update brings:
- the big cleanup up by Maxime for device control and slave
capabilities. This makes the API much cleaner.
- new IMG MDC driver by Andrew
- new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
bunch of fixes on rcar drivers
- odd fixes and updates spread over driver"
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
dmaengine: pl330: add DMA_PAUSE feature
dmaengine: pl330: improve pl330_tx_status() function
dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
dmaengine: rcar-dmac: Fix spinlock issues in interrupt
dmaenegine: edma: fix sparse warnings
dmaengine: rcar-dmac: Fix uninitialized variable usage
dmaengine: shdmac: extend PM methods
dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
dmaengine: pl330: fix bug that cause start the same descs in cyclic
dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
dmaengine: at_xdmac: simplify channel configuration stuff
dmaengine: at_xdmac: introduce save_cc field
dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
ioat: fail self-test if wait_for_completion times out
dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
dmaengine: dw: amend description of dma_dev field
dmatest: move src_off, dst_off, len inside loop
...
irq_dispose_mapping is not called on all error paths from caam_jr_init.
This takes care of several clean-up issues by performing resource
clean-up and allocation at the same level.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- assoc_nents and src_nents are never zero when all_contig is false
- iv_contig is zero on the else branch
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ICV check failures are part of normal operation;
leave user notification up to the higher levels,
as is done in s/w algorithm implementations.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Tested-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify crypto drivers to use the generic SG helper since
both of them are equivalent and the one from crypto is redundant.
See also:
468577abe3 reverted in
b2ab4a57b0
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If only one of the 2 __get_free_pages fails, then there is a memory leak.
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We don't need the qat_auth_state structure anymore.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch ad511e260a (crypto: qat -
Fix incorrect uses of memzero_explicit) broke hashing because the
code was in fact overwriting the qat_auth_state variable.
In fact there is no reason for the variable to exist anyway since
all we are using it for is to store ipad and opad. So we could
simply create ipad and opad directly and avoid this whole mess.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prior to resetting the hardware, use pci_wait_for_pending_transaction()
instead of open coding similar functionality.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In adf_dev_stop(), adf_ae_stop() is never called because adf_dev_started()
will always return false since the ADF_STATUS_STARTED bit is cleared
earlier in the function.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the device needs a reset, e.g. when an uncorrectable PCIe AER event
occurs, various services/data structures need to be cleaned up, the
hardware reset and the services/data structures initialized and started.
The code to perform the cleanup and initialization was not performed when
a device reset was done.
This patch moves some of the initialization code out of the .probe entry-
point into a separate function that is now called during probe as well as
after the hardware has been reset. Similarly, a new function is added for
first cleaning up these services/data structures prior to resetting. The
new functions are adf_dev_init() and adf_dev_shutdown(), respectively, for
which there are already prototypes but no actual functions just yet and are
now called when the device is reset and during probe/cleanup of the driver.
The down and up flows via ioctl calls has similarly been updated.
In addition, there are two other bugs in the reset flow - one in the logic
for determining whether to schedule a device reset upon receiving an
uncorrectable AER event which prevents the reset flow from being initiated,
and another with clearing the status bit indicating a device is configured
(when resetting the device the configuration remains across the reset so
the bit should not be cleared, otherwise, the necessary services will not
be re-started in adf_dev_start() after the reset - clear the bit only when
actually deleting the configuration).
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
memzero_explicit should only be used on stack variables that get
zapped just before they go out of scope.
This patch replaces all unnecessary uses of memzero_explicit with
memset, removes two memzero_explicit calls altogether as the tfm
context comes pre-zeroed, and adds a missing memzero_explicit of
the stack variable buff in qat_alg_do_precomputes. The memzeros
on ipad/opad + digest_size/auth_keylen are also removed as the
entire auth_state is already zeroed on entry.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Tadeusz Struk <tadeusz.struk@intel.com>
dd->total is unsigned so it won't do any good to check for negative
value after subtracting instead of that we should check if the
subtracted value is bigger than him
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes unnecessary KERN_ERR from bfin_crypto_crc_mod_init().
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the function get_dynamic_sa_offset_iv_field() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed a coding style error, code indent should use tabs where possible
Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for cbc(aes) ablkcipher.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Bruce W. Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixed invalid assumpion that the sgl in and sgl out will always have the same
number of entries.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fallback is never used, so there is no point in having it.
The cra_exit routine can also be removed, since all it did was releasing
the fallback, along with the stub around cra_init, which just added an
unused NULL argument.
Signed-off-by: Svenning Soerensen <sss@secomea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We are removing the dmaengine_device_control API, that shouldn't even have been
exposed in the first place. Change the callers to use the proper API.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
Pull crypto update from Herbert Xu:
- The crypto API is now documented :)
- Disallow arbitrary module loading through crypto API.
- Allow get request with empty driver name through crypto_user.
- Allow speed testing of arbitrary hash functions.
- Add caam support for ctr(aes), gcm(aes) and their derivatives.
- nx now supports concurrent hashing properly.
- Add sahara support for SHA1/256.
- Add ARM64 version of CRC32.
- Misc fixes.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
crypto: tcrypt - Allow speed testing of arbitrary hash functions
crypto: af_alg - add user space interface for AEAD
crypto: qat - fix problem with coalescing enable logic
crypto: sahara - add support for SHA1/256
crypto: sahara - replace tasklets with kthread
crypto: sahara - add support for i.MX53
crypto: sahara - fix spinlock initialization
crypto: arm - replace memset by memzero_explicit
crypto: powerpc - replace memset by memzero_explicit
crypto: sha - replace memset by memzero_explicit
crypto: sparc - replace memset by memzero_explicit
crypto: algif_skcipher - initialize upon init request
crypto: algif_skcipher - removed unneeded code
crypto: algif_skcipher - Fixed blocking recvmsg
crypto: drbg - use memzero_explicit() for clearing sensitive data
crypto: drbg - use MODULE_ALIAS_CRYPTO
crypto: include crypto- module prefix in template
crypto: user - add MODULE_ALIAS
crypto: sha-mb - remove a bogus NULL check
crytpo: qat - Fix 64 bytes requests
...
Fixed issue reported by Dan Carpenter
410 if (adf_get_cfg_int(accel_dev, "Accelerator0",
411 ADF_ETRMGR_COALESCING_ENABLED_FORMAT,
412 bank_num, &coalesc_enabled) && coalesc_enabled)
This condition is reversed, so it only enables coalescing on error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the MDHA unit in the SAHARA core.
The MDHA can generate hash digests for MD5 and SHA1 in version 3 and
additionally SHA224 and SHA256 in version 4.
Add the SHA1 and SHA256 algorithms to the driver.
The implementation was tested with the in-kernel testmgr and a userspace
testprogram using AF_ALG with+without upto 128 pthreads on each AES and
SHA256 on i.MX53.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for SHA support, replace the tasklets with a kthread that
manages one crypto_queue for the core.
As the Sahara can only process one AES or SHA request at a time, we make
sure that the queue serializes all requests from userspace. Instead of a
watchdog timer we now use a completion mechanism in the queue manager
thread.
This makes the control flow more obvious and guarantees, that only one
request is dequeued until the completion is completed.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Sahara on the i.MX53 is of version 4. Add support for probing the
device.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver uses a spinlock, but never initializes it.
Fix this.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The OF_RECONFIG notifier callback uses a different structure depending
on whether it is a node change or a property change. This is silly, and
not very safe. Rework the code to use the same data structure regardless
of the type of notifier.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: <linuxppc-dev@lists.ozlabs.org>
This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:
https://lkml.org/lkml/2013/3/4/70
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a specific implementation, <asm/unaligned.h> is the
multiplexer that has the arch-specific knowledge of which
of the implementations needs to be used, so include that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
