Commit Graph

10821 Commits

Author SHA1 Message Date
James Morse
0247f3f4d7 mm/memcontrol.c: make the walk_page_range() limit obvious
mem_cgroup_count_precharge() and mem_cgroup_move_charge() both call
walk_page_range() on the range 0 to ~0UL, neither provide a pte_hole
callback, which causes the current implementation to skip non-vma
regions.  This is all fine but follow up changes would like to make
walk_page_range more generic so it is better to be explicit about which
range to traverse so let's use highest_vm_end to explicitly traverse
only user mmaped memory.

[mhocko@kernel.org: rewrote changelog]
Link: http://lkml.kernel.org/r/1472655897-22532-1-git-send-email-james.morse@arm.com
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Aaron Lu
6fcb52a56f thp: reduce usage of huge zero page's atomic counter
The global zero page is used to satisfy an anonymous read fault.  If
THP(Transparent HugePage) is enabled then the global huge zero page is
used.  The global huge zero page uses an atomic counter for reference
counting and is allocated/freed dynamically according to its counter
value.

CPU time spent on that counter will greatly increase if there are a lot
of processes doing anonymous read faults.  This patch proposes a way to
reduce the access to the global counter so that the CPU load can be
reduced accordingly.

To do this, a new flag of the mm_struct is introduced:
MMF_USED_HUGE_ZERO_PAGE.  With this flag, the process only need to touch
the global counter in two cases:

 1 The first time it uses the global huge zero page;
 2 The time when mm_user of its mm_struct reaches zero.

Note that right now, the huge zero page is eligible to be freed as soon
as its last use goes away.  With this patch, the page will not be
eligible to be freed until the exit of the last process from which it
was ever used.

And with the use of mm_user, the kthread is not eligible to use huge
zero page either.  Since no kthread is using huge zero page today, there
is no difference after applying this patch.  But if that is not desired,
I can change it to when mm_count reaches zero.

Case used for test on Haswell EP:

  usemem -n 72 --readonly -j 0x200000 100G

Which spawns 72 processes and each will mmap 100G anonymous space and
then do read only access to that space sequentially with a step of 2MB.

  CPU cycles from perf report for base commit:
      54.03%  usemem   [kernel.kallsyms]   [k] get_huge_zero_page
  CPU cycles from perf report for this commit:
       0.11%  usemem   [kernel.kallsyms]   [k] mm_get_huge_zero_page

Performance(throughput) of the workload for base commit: 1784430792
Performance(throughput) of the workload for this commit: 4726928591
164% increase.

Runtime of the workload for base commit: 707592 us
Runtime of the workload for this commit: 303970 us
50% drop.

Link: http://lkml.kernel.org/r/fe51a88f-446a-4622-1363-ad1282d71385@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Tim Chen
03e86dba5b cpu: fix node state for whether it contains CPU
In current kernel code, we only call node_set_state(cpu_to_node(cpu),
N_CPU) when a cpu is hot plugged.  But we do not set the node state for
N_CPU when the cpus are brought online during boot.

So this could lead to failure when we check to see if a node contains
cpu with node_state(node_id, N_CPU).

One use case is in the node_reclaime function:

        /*
         * Only run node reclaim on the local node or on nodes that do
         * not
         * have associated processors. This will favor the local
         * processor
         * over remote processors and spread off node memory allocations
         * as wide as possible.
         */
        if (node_state(pgdat->node_id, N_CPU) && pgdat->node_id !=
                numa_node_id())
                return NODE_RECLAIM_NOSCAN;

I instrumented the kernel to call this function after boot and it always
returns 0 on a x86 desktop machine until I apply the attached patch.

   int num_cpu_node(void)
   {
       int i, nr_cpu_nodes = 0;

       for_each_node(i) {
               if (node_state(i, N_CPU))
                       ++ nr_cpu_nodes;
       }

       return nr_cpu_nodes;
   }

Fix this by checking each node for online CPU when we initialize
vmstat that's responsible for maintaining node state.

Link: http://lkml.kernel.org/r/20160829175922.GA21775@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: <Huang@linux.intel.com>
Cc: Ying <ying.huang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Toshi Kani
74d2fad133 thp, dax: add thp_get_unmapped_area for pmd mappings
When CONFIG_FS_DAX_PMD is set, DAX supports mmap() using pmd page size.
This feature relies on both mmap virtual address and FS block (i.e.
physical address) to be aligned by the pmd page size.  Users can use
mkfs options to specify FS to align block allocations.  However,
aligning mmap address requires code changes to existing applications for
providing a pmd-aligned address to mmap().

For instance, fio with "ioengine=mmap" performs I/Os with mmap() [1].
It calls mmap() with a NULL address, which needs to be changed to
provide a pmd-aligned address for testing with DAX pmd mappings.
Changing all applications that call mmap() with NULL is undesirable.

Add thp_get_unmapped_area(), which can be called by filesystem's
get_unmapped_area to align an mmap address by the pmd size for a DAX
file.  It calls the default handler, mm->get_unmapped_area(), to find a
range and then aligns it for a DAX file.

The patch is based on Matthew Wilcox's change that allows adding support
of the pud page size easily.

[1]: https://github.com/axboe/fio/blob/master/engines/mmap.c
Link: http://lkml.kernel.org/r/1472497881-9323-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Simon Guo
b155b4fde5 mm: mlock: avoid increase mm->locked_vm on mlock() when already mlock2(,MLOCK_ONFAULT)
When one vma was with flag VM_LOCKED|VM_LOCKONFAULT (by invoking
mlock2(,MLOCK_ONFAULT)), it can again be populated with mlock() with
VM_LOCKED flag only.

There is a hole in mlock_fixup() which increase mm->locked_vm twice even
the two operations are on the same vma and both with VM_LOCKED flags.

The issue can be reproduced by following code:

  mlock2(p, 1024 * 64, MLOCK_ONFAULT); //VM_LOCKED|VM_LOCKONFAULT
  mlock(p, 1024 * 64);  //VM_LOCKED

Then check the increase VmLck field in /proc/pid/status(to 128k).

When vma is set with different vm_flags, and the new vm_flags is with
VM_LOCKED, it is not necessarily be a "new locked" vma.  This patch
corrects this bug by prevent mm->locked_vm from increment when old
vm_flags is already VM_LOCKED.

Link: http://lkml.kernel.org/r/1472554781-9835-3-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Simon Guo
0cf2f6f6dc mm: mlock: check against vma for actual mlock() size
In do_mlock(), the check against locked memory limitation has a hole
which will fail following cases at step 3):

 1) User has a memory chunk from addressA with 50k, and user mem lock
    rlimit is 64k.
 2) mlock(addressA, 30k)
 3) mlock(addressA, 40k)

The 3rd step should have been allowed since the 40k request is
intersected with the previous 30k at step 2), and the 3rd step is
actually for mlock on the extra 10k memory.

This patch checks vma to caculate the actual "new" mlock size, if
necessary, and ajust the logic to fix this issue.

[akpm@linux-foundation.org: clean up comment layout]
[wei.guo.simon@gmail.com: correct a typo in count_mm_mlocked_page_nr()]
 Link: http://lkml.kernel.org/r/1473325970-11393-2-git-send-email-wei.guo.simon@gmail.com
Link: http://lkml.kernel.org/r/1472554781-9835-2-git-send-email-wei.guo.simon@gmail.com
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Cc: Alexey Klimov <klimov.linux@gmail.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Guo <wei.guo.simon@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko
9254990fb9 oom: warn if we go OOM for higher order and compaction is disabled
Since the lumpy reclaim is gone there is no source of higher order pages
if CONFIG_COMPACTION=n except for the order-0 pages reclaim which is
unreliable for that purpose to say the least.  Hitting an OOM for
!costly higher order requests is therefore all not that hard to imagine.
We are trying hard to not invoke OOM killer as much as possible but
there is simply no reliable way to detect whether more reclaim retries
make sense.

Disabling COMPACTION is not widespread but it seems that some users
might have disable the feature without realizing full consequences
(mostly along with disabling THP because compaction used to be THP
mainly thing).  This patch just adds a note if the OOM killer was
triggered by higher order request with compaction disabled.  This will
help us identifying possible misconfiguration right from the oom report
which is easier than to always keep in mind that somebody might have
disabled COMPACTION without a good reason.

Link: http://lkml.kernel.org/r/20160830111632.GD23963@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Huang Ying
371a096edf mm: don't use radix tree writeback tags for pages in swap cache
File pages use a set of radix tree tags (DIRTY, TOWRITE, WRITEBACK,
etc.) to accelerate finding the pages with a specific tag in the radix
tree during inode writeback.  But for anonymous pages in the swap cache,
there is no inode writeback.  So there is no need to find the pages with
some writeback tags in the radix tree.  It is not necessary to touch
radix tree writeback tags for pages in the swap cache.

Per Rik van Riel's suggestion, a new flag AS_NO_WRITEBACK_TAGS is
introduced for address spaces which don't need to update the writeback
tags.  The flag is set for swap caches.  It may be used for DAX file
systems, etc.

With this patch, the swap out bandwidth improved 22.3% (from ~1.2GB/s to
~1.48GBps) in the vm-scalability swap-w-seq test case with 8 processes.
The test is done on a Xeon E5 v3 system.  The swap device used is a RAM
simulated PMEM (persistent memory) device.  The improvement comes from
the reduced contention on the swap cache radix tree lock.  To test
sequential swapping out, the test case uses 8 processes, which
sequentially allocate and write to the anonymous pages until RAM and
part of the swap device is used up.

Details of comparison is as follow,

base             base+patch
---------------- --------------------------
         %stddev     %change         %stddev
             \          |                \
   2506952 ±  2%     +28.1%    3212076 ±  7%  vm-scalability.throughput
   1207402 ±  7%     +22.3%    1476578 ±  6%  vmstat.swap.so
     10.86 ± 12%     -23.4%       8.31 ± 16%  perf-profile.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list
     10.82 ± 13%     -33.1%       7.24 ± 14%  perf-profile.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_zone_memcg
     10.36 ± 11%    -100.0%       0.00 ± -1%  perf-profile.cycles-pp._raw_spin_lock_irqsave.__test_set_page_writeback.bdev_write_page.__swap_writepage.swap_writepage
     10.52 ± 12%    -100.0%       0.00 ± -1%  perf-profile.cycles-pp._raw_spin_lock_irqsave.test_clear_page_writeback.end_page_writeback.page_endio.pmem_rw_page

Link: http://lkml.kernel.org/r/1472578089-5560-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
zijun_hu
1d8bf926f8 mm/bootmem.c: replace kzalloc() by kzalloc_node()
In ___alloc_bootmem_node_nopanic(), replace kzalloc() by kzalloc_node()
in order to allocate memory within given node preferentially when slab
is available

Link: http://lkml.kernel.org/r/1f487f12-6af4-5e4f-a28c-1de2361cdcd8@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
zijun_hu
2382705f22 mm/nobootmem.c: remove duplicate macro ARCH_LOW_ADDRESS_LIMIT statements
Fix the following bugs:

 - the same ARCH_LOW_ADDRESS_LIMIT statements are duplicated between
   header and relevant source

 - don't ensure ARCH_LOW_ADDRESS_LIMIT perhaps defined by ARCH in
   asm/processor.h is preferred over default in linux/bootmem.h
   completely since the former header isn't included by the latter

Link: http://lkml.kernel.org/r/e046aeaa-e160-6d9e-dc1b-e084c2fd999f@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Srikar Dronamraju
8907de5dc6 mm/memblock.c: expose total reserved memory
The total reserved memory in a system is accounted but not available for
use use outside mm/memblock.c.  By exposing the total reserved memory,
systems can better calculate the size of large hashes.

Link: http://lkml.kernel.org/r/1472476010-4709-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Srikar Dronamraju
f6f34b4387 mm: introduce arch_reserved_kernel_pages()
Currently arch specific code can reserve memory blocks but
alloc_large_system_hash() may not take it into consideration when sizing
the hashes.  This can lead to bigger hash than required and lead to no
available memory for other purposes.  This is specifically true for
systems with CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled.

One approach to solve this problem would be to walk through the memblock
regions and calculate the available memory and base the size of hash
system on the available memory.

The other approach would be to depend on the architecture to provide the
number of pages that are reserved.  This change provides hooks to allow
the architecture to provide the required info.

Link: http://lkml.kernel.org/r/1472476010-4709-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Aneesh Kumar K.V
c9634cf012 mm: use zonelist name instead of using hardcoded index
Use the existing enums instead of hardcoded index when looking at the
zonelist.  This makes it more readable.  No functionality change by this
patch.

Link: http://lkml.kernel.org/r/1472227078-24852-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko
1b51e65eab oom, oom_reaper: allow to reap mm shared by the kthreads
oom reaper was skipped for an mm which is shared with the kernel thread
(aka use_mm()).  The primary concern was that such a kthread might want
to read from the userspace memory and see zero page as a result of the
oom reaper action.  This is no longer a problem after "mm: make sure
that kthreads will not refault oom reaped memory" because any attempt to
fault in when the MMF_UNSTABLE is set will result in SIGBUS and so the
target user should see an error.  This means that we can finally allow
oom reaper also to tasks which share their mm with kthreads.

Link: http://lkml.kernel.org/r/1472119394-11342-10-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko
3f70dc38ce mm: make sure that kthreads will not refault oom reaped memory
There are only few use_mm() users in the kernel right now.  Most of them
write to the target memory but vhost driver relies on
copy_from_user/get_user from a kernel thread context.  This makes it
impossible to reap the memory of an oom victim which shares the mm with
the vhost kernel thread because it could see a zero page unexpectedly
and theoretically make an incorrect decision visible outside of the
killed task context.

To quote Michael S. Tsirkin:
: Getting an error from __get_user and friends is handled gracefully.
: Getting zero instead of a real value will cause userspace
: memory corruption.

The vhost kernel thread is bound to an open fd of the vhost device which
is not tight to the mm owner life cycle in general.  The device fd can
be inherited or passed over to another process which means that we
really have to be careful about unexpected memory corruption because
unlike for normal oom victims the result will be visible outside of the
oom victim context.

Make sure that no kthread context (users of use_mm) can ever see
corrupted data because of the oom reaper and hook into the page fault
path by checking MMF_UNSTABLE mm flag.  __oom_reap_task_mm will set the
flag before it starts unmapping the address space while the flag is
checked after the page fault has been handled.  If the flag is set then
SIGBUS is triggered so any g-u-p user will get a error code.

Regular tasks do not need this protection because all which share the mm
are killed when the mm is reaped and so the corruption will not outlive
them.

This patch shouldn't have any visible effect at this moment because the
OOM killer doesn't invoke oom reaper for tasks with mm shared with
kthreads yet.

Link: http://lkml.kernel.org/r/1472119394-11342-9-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Tetsuo Handa
38531201c1 mm, oom: enforce exit_oom_victim on current task
There are no users of exit_oom_victim on !current task anymore so enforce
the API to always work on the current.

Link: http://lkml.kernel.org/r/1472119394-11342-8-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko
7d2e7a22cf oom, suspend: fix oom_killer_disable vs. pm suspend properly
Commit 7407054209 ("oom, suspend: fix oom_reaper vs.
oom_killer_disable race") has workaround an existing race between
oom_killer_disable and oom_reaper by adding another round of
try_to_freeze_tasks after the oom killer was disabled.  This was the
easiest thing to do for a late 4.7 fix.  Let's fix it properly now.

After "oom: keep mm of the killed task available" we no longer have to
call exit_oom_victim from the oom reaper because we have stable mm
available and hide the oom_reaped mm by MMF_OOM_SKIP flag.  So let's
remove exit_oom_victim and the race described in the above commit
doesn't exist anymore if.

Unfortunately this alone is not sufficient for the oom_killer_disable
usecase because now we do not have any reliable way to reach
exit_oom_victim (the victim might get stuck on a way to exit for an
unbounded amount of time).  OOM killer can cope with that by checking mm
flags and move on to another victim but we cannot do the same for
oom_killer_disable as we would lose the guarantee of no further
interference of the victim with the rest of the system.  What we can do
instead is to cap the maximum time the oom_killer_disable waits for
victims.  The only current user of this function (pm suspend) already
has a concept of timeout for back off so we can reuse the same value
there.

Let's drop set_freezable for the oom_reaper kthread because it is no
longer needed as the reaper doesn't wake or thaw any processes.

Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko
862e3073b3 mm, oom: get rid of signal_struct::oom_victims
After "oom: keep mm of the killed task available" we can safely detect
an oom victim by checking task->signal->oom_mm so we do not need the
signal_struct counter anymore so let's get rid of it.

This alone wouldn't be sufficient for nommu archs because
exit_oom_victim doesn't hide the process from the oom killer anymore.
We can, however, mark the mm with a MMF flag in __mmput.  We can reuse
MMF_OOM_REAPED and rename it to a more generic MMF_OOM_SKIP.

Link: http://lkml.kernel.org/r/1472119394-11342-6-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko
26db62f179 oom: keep mm of the killed task available
oom_reap_task has to call exit_oom_victim in order to make sure that the
oom vicim will not block the oom killer for ever.  This is, however,
opening new problems (e.g oom_killer_disable exclusion - see commit
7407054209 ("oom, suspend: fix oom_reaper vs.  oom_killer_disable
race")).  exit_oom_victim should be only called from the victim's
context ideally.

One way to achieve this would be to rely on per mm_struct flags.  We
already have MMF_OOM_REAPED to hide a task from the oom killer since
"mm, oom: hide mm which is shared with kthread or global init". The
problem is that the exit path:

  do_exit
    exit_mm
      tsk->mm = NULL;
      mmput
        __mmput
      exit_oom_victim

doesn't guarantee that exit_oom_victim will get called in a bounded
amount of time.  At least exit_aio depends on IO which might get blocked
due to lack of memory and who knows what else is lurking there.

This patch takes a different approach.  We remember tsk->mm into the
signal_struct and bind it to the signal struct life time for all oom
victims.  __oom_reap_task_mm as well as oom_scan_process_thread do not
have to rely on find_lock_task_mm anymore and they will have a reliable
reference to the mm struct.  As a result all the oom specific
communication inside the OOM killer can be done via tsk->signal->oom_mm.

Increasing the signal_struct for something as unlikely as the oom killer
is far from ideal but this approach will make the code much more
reasonable and long term we even might want to move task->mm into the
signal_struct anyway.  In the next step we might want to make the oom
killer exclusion and access to memory reserves completely independent
which would be also nice.

Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Tetsuo Handa
8496afaba9 mm,oom_reaper: do not attempt to reap a task twice
"mm, oom_reaper: do not attempt to reap a task twice" tried to give the
OOM reaper one more chance to retry using MMF_OOM_NOT_REAPABLE flag.
But the usefulness of the flag is rather limited and actually never
shown in practice.  If the flag is set, it means that the holder of
mm->mmap_sem cannot call up_write() due to presumably being blocked at
unkillable wait waiting for other thread's memory allocation.  But since
one of threads sharing that mm will queue that mm immediately via
task_will_free_mem() shortcut (otherwise, oom_badness() will select the
same mm again due to oom_score_adj value unchanged), retrying
MMF_OOM_NOT_REAPABLE mm is unlikely helpful.

Let's always set MMF_OOM_REAPED.

Link: http://lkml.kernel.org/r/1472119394-11342-3-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Tetsuo Handa
7ebffa4555 mm,oom_reaper: reduce find_lock_task_mm() usage
Patch series "fortify oom killer even more", v2.

This patch (of 9):

__oom_reap_task() can be simplified a bit if it receives a valid mm from
oom_reap_task() which also uses that mm when __oom_reap_task() failed.
We can drop one find_lock_task_mm() call and also make the
__oom_reap_task() code flow easier to follow.  Moreover, this will make
later patch in the series easier to review.  Pinning mm's mm_count for
longer time is not really harmful because this will not pin much memory.

This patch doesn't introduce any functional change.

Link: http://lkml.kernel.org/r/1472119394-11342-2-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Huang Ying
6b53491598 mm, swap: add swap_cluster_list
This is a code clean up patch without functionality changes.  The
swap_cluster_list data structure and its operations are introduced to
provide some better encapsulation for the free cluster and discard
cluster list operations.  This avoid some code duplication, improved the
code readability, and reduced the total line number.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1472067356-16004-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Alexey Dobriyan
131ddc5c7d mm: unrig VMA cache hit ratio
Current code doesn't count first FIND operation after VMA cache flush
(which happen surprisingly often) artificially increasing cache hit ratio.

On my regular setup the difference is:

		Before				After
	==========================================================

	* boot, login into KDE

	vmacache_find_calls 446216	vmacache_find_calls 492741
	vmacache_find_hits 277596	vmacache_find_hits 276096

		~62.2%				~56.0%

	* rebuild kernel (no changes to code, usual config)

	vmacache_find_calls 1943007	vmacache_find_calls 2083718
	vmacache_find_hits 1246123	vmacache_find_hits 1244146

		~64.1%				~59.7%

	* rebuild kernel (full rebuild, usual config)

	vmacache_find_calls 32163155	vmacache_find_calls 33677183
	vmacache_find_hits 27889956	vmacache_find_hits 27877591

		~88.2%				~84.3%

Total: ~4% cache hit ratio.

If someone is counting _relative_ cache _miss_ ratio, misreporting is much
higher.

Link: http://lkml.kernel.org/r/20160822225009.GA3934@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Bart Van Assche
c4b209a426 do_generic_file_read(): fail immediately if killed
If a fatal signal has been received, fail immediately instead of trying
to read more data.

If wait_on_page_locked_killable() was interrupted then this page is most
likely is not PageUptodate() and in this case do_generic_file_read()
will fail after lock_page_killable().

See also commit ebded02788 ("mm: filemap: avoid unnecessary calls to
lock_page when waiting for IO to complete during a read")

[oleg@redhat.com: changelog addition]
Link: http://lkml.kernel.org/r/63068e8e-8bee-b208-8441-a3c39a9d9eb6@sandisk.com
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim
9300d8dfd2 mm/page_owner: don't define fields on struct page_ext by hard-coding
There is a memory waste problem if we define field on struct page_ext by
hard-coding.  Entry size of struct page_ext includes the size of those
fields even if it is disabled at runtime.  Now, extra memory request at
runtime is possible so page_owner don't need to define it's own fields
by hard-coding.

This patch removes hard-coded define and uses extra memory for storing
page_owner information in page_owner.  Most of code are just mechanical
changes.

Link: http://lkml.kernel.org/r/1471315879-32294-7-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim
980ac1672e mm/page_ext: support extra space allocation by page_ext user
Until now, if some page_ext users want to use it's own field on
page_ext, it should be defined in struct page_ext by hard-coding.  It
has a problem that wastes memory in following situation.

  struct page_ext {
   #ifdef CONFIG_A
  	int a;
   #endif
   #ifdef CONFIG_B
  	int b;
   #endif
  };

Assume that kernel is built with both CONFIG_A and CONFIG_B.  Even if we
enable feature A and doesn't enable feature B at runtime, each entry of
struct page_ext takes two int rather than one int.  It's undesirable
result so this patch tries to fix it.

To solve above problem, this patch implements to support extra space
allocation at runtime.  When need() callback returns true, it's extra
memory requirement is summed to entry size of page_ext.  Also, offset
for each user's extra memory space is returned.  With this offset, user
can use this extra space and there is no need to define needed field on
page_ext by hard-coding.

This patch only implements an infrastructure.  Following patch will use
it for page_owner which is only user having it's own fields on page_ext.

Link: http://lkml.kernel.org/r/1471315879-32294-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim
0b06bb3f60 mm/page_ext: rename offset to index
Here, 'offset' means entry index in page_ext array.  Following patch
will use 'offset' for field offset in each entry so rename current
'offset' to prevent confusion.

Link: http://lkml.kernel.org/r/1471315879-32294-5-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim
e2f612e673 mm/page_owner: move page_owner specific function to page_owner.c
There is no reason that page_owner specific function resides on
vmstat.c.

Link: http://lkml.kernel.org/r/1471315879-32294-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim
f1c1e9f7b5 mm/debug_pagealloc.c: don't allocate page_ext if we don't use guard page
What debug_pagealloc does is just mapping/unmapping page table.
Basically, it doesn't need additional memory space to memorize
something.  But, with guard page feature, it requires additional memory
to distinguish if the page is for guard or not.  Guard page is only used
when debug_guardpage_minorder is non-zero so this patch removes
additional memory allocation (page_ext) if debug_guardpage_minorder is
zero.

It saves memory if we just use debug_pagealloc and not guard page.

Link: http://lkml.kernel.org/r/1471315879-32294-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim
acbc15a4b3 mm/debug_pagealloc.c: clean-up guard page handling code
Patch series "Reduce memory waste by page extension user".

This patchset tries to reduce memory waste by page extension user.

First case is architecture supported debug_pagealloc.  It doesn't
requires additional memory if guard page isn't used.  8 bytes per page
will be saved in this case.

Second case is related to page owner feature.  Until now, if page_ext
users want to use it's own fields on page_ext, fields should be defined
in struct page_ext by hard-coding.  It has a following problem.

  struct page_ext {
   #ifdef CONFIG_A
  	int a;
   #endif
   #ifdef CONFIG_B
	int b;
   #endif
  };

Assume that kernel is built with both CONFIG_A and CONFIG_B.  Even if we
enable feature A and doesn't enable feature B at runtime, each entry of
struct page_ext takes two int rather than one int.  It's undesirable
waste so this patch tries to reduce it.  By this patchset, we can save
20 bytes per page dedicated for page owner feature in some
configurations.

This patch (of 6):

We can make code clean by moving decision condition for set_page_guard()
into set_page_guard() itself.  It will help code readability.  There is
no functional change.

Link: http://lkml.kernel.org/r/1471315879-32294-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko
bf48438354 mm, vmscan: get rid of throttle_vm_writeout
throttle_vm_writeout() was introduced back in 2005 to fix OOMs caused by
excessive pageout activity during the reclaim.  Too many pages could be
put under writeback therefore LRUs would be full of unreclaimable pages
until the IO completes and in turn the OOM killer could be invoked.

There have been some important changes introduced since then in the
reclaim path though.  Writers are throttled by balance_dirty_pages when
initiating the buffered IO and later during the memory pressure, the
direct reclaim is throttled by wait_iff_congested if the node is
considered congested by dirty pages on LRUs and the underlying bdi is
congested by the queued IO.  The kswapd is throttled as well if it
encounters pages marked for immediate reclaim or under writeback which
signals that that there are too many pages under writeback already.
Finally should_reclaim_retry does congestion_wait if the reclaim cannot
make any progress and there are too many dirty/writeback pages.

Another important aspect is that we do not issue any IO from the direct
reclaim context anymore.  In a heavy parallel load this could queue a
lot of IO which would be very scattered and thus unefficient which would
just make the problem worse.

This three mechanisms should throttle and keep the amount of IO in a
steady state even under heavy IO and memory pressure so yet another
throttling point doesn't really seem helpful.  Quite contrary, Mikulas
Patocka has reported that swap backed by dm-crypt doesn't work properly
because the swapout IO cannot make sufficient progress as the writeout
path depends on dm_crypt worker which has to allocate memory to perform
the encryption.  In order to guarantee a forward progress it relies on
the mempool allocator.  mempool_alloc(), however, prefers to use the
underlying (usually page) allocator before it grabs objects from the
pool.  Such an allocation can dive into the memory reclaim and
consequently to throttle_vm_writeout.  If there are too many dirty or
pages under writeback it will get throttled even though it is in fact a
flusher to clear pending pages.

  kworker/u4:0    D ffff88003df7f438 10488     6      2	0x00000000
  Workqueue: kcryptd kcryptd_crypt [dm_crypt]
  Call Trace:
    schedule+0x3c/0x90
    schedule_timeout+0x1d8/0x360
    io_schedule_timeout+0xa4/0x110
    congestion_wait+0x86/0x1f0
    throttle_vm_writeout+0x44/0xd0
    shrink_zone_memcg+0x613/0x720
    shrink_zone+0xe0/0x300
    do_try_to_free_pages+0x1ad/0x450
    try_to_free_pages+0xef/0x300
    __alloc_pages_nodemask+0x879/0x1210
    alloc_pages_current+0xa1/0x1f0
    new_slab+0x2d7/0x6a0
    ___slab_alloc+0x3fb/0x5c0
    __slab_alloc+0x51/0x90
    kmem_cache_alloc+0x27b/0x310
    mempool_alloc_slab+0x1d/0x30
    mempool_alloc+0x91/0x230
    bio_alloc_bioset+0xbd/0x260
    kcryptd_crypt+0x114/0x3b0 [dm_crypt]

Let's just drop throttle_vm_writeout altogether.  It is not very much
helpful anymore.

I have tried to test a potential writeback IO runaway similar to the one
described in the original patch which has introduced that [1].  Small
virtual machine (512MB RAM, 4 CPUs, 2G of swap space and disk image on a
rather slow NFS in a sync mode on the host) with 8 parallel writers each
writing 1G worth of data.  As soon as the pagecache fills up and the
direct reclaim hits then I start anon memory consumer in a loop
(allocating 300M and exiting after populating it) in the background to
make the memory pressure even stronger as well as to disrupt the steady
state for the IO.  The direct reclaim is throttled because of the
congestion as well as kswapd hitting congestion_wait due to nr_immediate
but throttle_vm_writeout doesn't ever trigger the sleep throughout the
test.  Dirty+writeback are close to nr_dirty_threshold with some
fluctuations caused by the anon consumer.

[1] https://www2.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc1/2.6.9-rc1-mm3/broken-out/vm-pageout-throttling.patch
Link: http://lkml.kernel.org/r/1471171473-21418-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Xishi Qiu
e780149bcd mm: fix set pageblock migratetype in deferred struct page init
On x86_64 MAX_ORDER_NR_PAGES is usually 4M, and a pageblock is usually
2M, so we only set one pageblock's migratetype in deferred_free_range()
if pfn is aligned to MAX_ORDER_NR_PAGES.  That means it causes
uninitialized migratetype blocks, you can see from "cat
/proc/pagetypeinfo", almost half blocks are Unmovable.

Also we missed freeing the last block in deferred_init_memmap(), it
causes memory leak.

Fixes: ac5d2539b2 ("mm: meminit: reduce number of times pageblocks are set during struct page init")
Link: http://lkml.kernel.org/r/57A3260F.4050709@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Xishi Qiu
e506b99696 mem-hotplug: fix node spanned pages when we have a movable node
Commit 342332e6a9 ("mm/page_alloc.c: introduce kernelcore=mirror
option") rewrote the calculation of node spanned pages.  But when we
have a movable node, the size of node spanned pages is double added.
That's because we have an empty normal zone, the present pages is zero,
but its spanned pages is not zero.

e.g.
    Zone ranges:
      DMA      [mem 0x0000000000001000-0x0000000000ffffff]
      DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
      Normal   [mem 0x0000000100000000-0x0000007c7fffffff]
    Movable zone start for each node
      Node 1: 0x0000001080000000
      Node 2: 0x0000002080000000
      Node 3: 0x0000003080000000
      Node 4: 0x0000003c80000000
      Node 5: 0x0000004c80000000
      Node 6: 0x0000005c80000000
    Early memory node ranges
      node   0: [mem 0x0000000000001000-0x000000000009ffff]
      node   0: [mem 0x0000000000100000-0x000000007552afff]
      node   0: [mem 0x000000007bd46000-0x000000007bd46fff]
      node   0: [mem 0x000000007bdcd000-0x000000007bffffff]
      node   0: [mem 0x0000000100000000-0x000000107fffffff]
      node   1: [mem 0x0000001080000000-0x000000207fffffff]
      node   2: [mem 0x0000002080000000-0x000000307fffffff]
      node   3: [mem 0x0000003080000000-0x0000003c7fffffff]
      node   4: [mem 0x0000003c80000000-0x0000004c7fffffff]
      node   5: [mem 0x0000004c80000000-0x0000005c7fffffff]
      node   6: [mem 0x0000005c80000000-0x0000006c7fffffff]
      node   7: [mem 0x0000006c80000000-0x0000007c7fffffff]

  node1:
    Normal, start=0x1080000, present=0x0, spanned=0x1000000
    Movable, start=0x1080000, present=0x1000000, spanned=0x1000000
    pgdat, start=0x1080000, present=0x1000000, spanned=0x2000000

After this patch, the problem is fixed.

  node1:
    Normal, start=0x0, present=0x0, spanned=0x0
    Movable, start=0x1080000, present=0x1000000, spanned=0x1000000
    pgdat, start=0x1080000, present=0x1000000, spanned=0x1000000

Link: http://lkml.kernel.org/r/57A325E8.6070100@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
fdd4c6149a mm, vmscan: make compaction_ready() more accurate and readable
The compaction_ready() is used during direct reclaim for costly order
allocations to skip reclaim for zones where compaction should be
attempted instead.  It's combining the standard compaction_suitable()
check with its own watermark check based on high watermark with extra
gap, and the result is confusing at best.

This patch attempts to better structure and document the checks
involved.  First, compaction_suitable() can determine that the
allocation should either succeed already, or that compaction doesn't
have enough free pages to proceed.  The third possibility is that
compaction has enough free pages, but we still decide to reclaim first -
unless we are already above the high watermark with gap.  This does not
mean that the reclaim will actually reach this watermark during single
attempt, this is rather an over-reclaim protection.  So document the
code as such.  The check for compaction_deferred() is removed
completely, as it in fact had no proper role here.

The result after this patch is mainly a less confusing code.  We also
skip some over-reclaim in cases where the allocation should already
succed.

Link: http://lkml.kernel.org/r/20160810091226.6709-12-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
8348faf91f mm, compaction: require only min watermarks for non-costly orders
The __compaction_suitable() function checks the low watermark plus a
compact_gap() gap to decide if there's enough free memory to perform
compaction.  Then __isolate_free_page uses low watermark check to decide
if particular free page can be isolated.  In the latter case, using low
watermark is needlessly pessimistic, as the free page isolations are
only temporary.  For __compaction_suitable() the higher watermark makes
sense for high-order allocations where more freepages increase the
chance of success, and we can typically fail with some order-0 fallback
when the system is struggling to reach that watermark.  But for
low-order allocation, forming the page should not be that hard.  So
using low watermark here might just prevent compaction from even trying,
and eventually lead to OOM killer even if we are above min watermarks.

So after this patch, we use min watermark for non-costly orders in
__compaction_suitable(), and for all orders in __isolate_free_page().

[vbabka@suse.cz: clarify __isolate_free_page() comment]
 Link: http://lkml.kernel.org/r/7ae4baec-4eca-e70b-2a69-94bea4fb19fa@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-11-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
984fdba6a3 mm, compaction: use proper alloc_flags in __compaction_suitable()
The __compaction_suitable() function checks the low watermark plus a
compact_gap() gap to decide if there's enough free memory to perform
compaction.  This check uses direct compactor's alloc_flags, but that's
wrong, since these flags are not applicable for freepage isolation.

For example, alloc_flags may indicate access to memory reserves, making
compaction proceed, and then fail watermark check during the isolation.

A similar problem exists for ALLOC_CMA, which may be part of
alloc_flags, but not during freepage isolation.  In this case however it
makes sense to use ALLOC_CMA both in __compaction_suitable() and
__isolate_free_page(), since there's actually nothing preventing the
freepage scanner to isolate from CMA pageblocks, with the assumption
that a page that could be migrated once by compaction can be migrated
also later by CMA allocation.  Thus we should count pages in CMA
pageblocks when considering compaction suitability and when isolating
freepages.

To sum up, this patch should remove some false positives from
__compaction_suitable(), and allow compaction to proceed when free pages
required for compaction reside in the CMA pageblocks.

Link: http://lkml.kernel.org/r/20160810091226.6709-10-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
9861a62c33 mm, compaction: create compact_gap wrapper
Compaction uses a watermark gap of (2UL << order) pages at various
places and it's not immediately obvious why.  Abstract it through a
compact_gap() wrapper to create a single place with a thorough
explanation.

[vbabka@suse.cz: clarify the comment of compact_gap()]
 Link: http://lkml.kernel.org/r/7b6aed1f-fdf8-2063-9ff4-bbe4de712d37@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-9-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
f2b8228c5f mm, compaction: use correct watermark when checking compaction success
The __compact_finished() function uses low watermark in a check that has
to pass if the direct compaction is to finish and allocation should
succeed.  This is too pessimistic, as the allocation will typically use
min watermark.  It may happen that during compaction, we drop below the
low watermark (due to parallel activity), but still form the target
high-order page.  By checking against low watermark, we might needlessly
continue compaction.

Similarly, __compaction_suitable() uses low watermark in a check whether
allocation can succeed without compaction.  Again, this is unnecessarily
pessimistic.

After this patch, these check will use direct compactor's alloc_flags to
determine the watermark, which is effectively the min watermark.

Link: http://lkml.kernel.org/r/20160810091226.6709-8-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
a8e025e55b mm, compaction: add the ultimate direct compaction priority
During reclaim/compaction loop, it's desirable to get a final answer
from unsuccessful compaction so we can either fail the allocation or
invoke the OOM killer.  However, heuristics such as deferred compaction
or pageblock skip bits can cause compaction to skip parts or whole zones
and lead to premature OOM's, failures or excessive reclaim/compaction
retries.

To remedy this, we introduce a new direct compaction priority called
COMPACT_PRIO_SYNC_FULL, which instructs direct compaction to:

 - ignore deferred compaction status for a zone
 - ignore pageblock skip hints
 - ignore cached scanner positions and scan the whole zone

The new priority should get eventually picked up by
should_compact_retry() and this should improve success rates for costly
allocations using __GFP_REPEAT, such as hugetlbfs allocations, and
reduce some corner-case OOM's for non-costly allocations.

Link: http://lkml.kernel.org/r/20160810091226.6709-6-vbabka@suse.cz
[vbabka@suse.cz: use the MIN_COMPACT_PRIORITY alias]
  Link: http://lkml.kernel.org/r/d443b884-87e7-1c93-8684-3a3a35759fb1@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
7ceb009a22 mm, compaction: don't recheck watermarks after COMPACT_SUCCESS
Joonsoo has reminded me that in a later patch changing watermark checks
throughout compaction I forgot to update checks in
try_to_compact_pages() and compactd_do_work().  Closer inspection
however shows that they are redundant now in the success case, because
compact_zone() now reliably reports this with COMPACT_SUCCESS.  So
effectively the checks just repeat (a subset) of checks that have just
passed.  So instead of checking watermarks again, just test the return
value.

Note it's also possible that compaction would declare failure e.g.
because its find_suitable_fallback() is more strict than simple
watermark check, and then the watermark check we are removing would then
still succeed.  After this patch this is not possible and it's arguably
better, because for long-term fragmentation avoidance we should rather
try a different zone than allocate with the unsuitable fallback.  If
compaction of all zones fail and the allocation is important enough, it
will retry and succeed anyway.

Also remove the stray "bool success" variable from kcompactd_do_work().

Link: http://lkml.kernel.org/r/20160810091226.6709-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
cf378319d3 mm, compaction: rename COMPACT_PARTIAL to COMPACT_SUCCESS
COMPACT_PARTIAL has historically meant that compaction returned after
doing some work without fully compacting a zone.  It however didn't
distinguish if compaction terminated because it succeeded in creating
the requested high-order page.  This has changed recently and now we
only return COMPACT_PARTIAL when compaction thinks it succeeded, or the
high-order watermark check in compaction_suitable() passes and no
compaction needs to be done.

So at this point we can make the return value clearer by renaming it to
COMPACT_SUCCESS.  The next patch will remove some redundant tests for
success where compaction just returned COMPACT_SUCCESS.

Link: http://lkml.kernel.org/r/20160810091226.6709-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
791cae9620 mm, compaction: cleanup unused functions
Since kswapd compaction moved to kcompactd, compact_pgdat() is not
called anymore, so we remove it.  The only caller of __compact_pgdat()
is compact_node(), so we merge them and remove code that was only
reachable from kswapd.

Link: http://lkml.kernel.org/r/20160810091226.6709-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka
06ed29989f mm, compaction: make whole_zone flag ignore cached scanner positions
Patch series "make direct compaction more deterministic")

This is mostly a followup to Michal's oom detection rework, which
highlighted the need for direct compaction to provide better feedback in
reclaim/compaction loop, so that it can reliably recognize when
compaction cannot make further progress, and allocation should invoke
OOM killer or fail.  We've discussed this at LSF/MM [1] where I proposed
expanding the async/sync migration mode used in compaction to more
general "priorities".  This patchset adds one new priority that just
overrides all the heuristics and makes compaction fully scan all zones.
I don't currently think that we need more fine-grained priorities, but
we'll see.  Other than that there's some smaller fixes and cleanups,
mainly related to the THP-specific hacks.

I've tested this with stress-highalloc in GFP_KERNEL order-4 and
THP-like order-9 scenarios.  There's some improvement for compaction
stats for the order-4, which is likely due to the better watermarks
handling.  In the previous version I reported mostly noise wrt
compaction stats, and decreased direct reclaim - now the reclaim is
without difference.  I believe this is due to the less aggressive
compaction priority increase in patch 6.

"before" is a mmotm tree prior to 4.7 release plus the first part of the
series that was sent and merged separately

                                    before        after
order-4:

Compaction stalls                    27216       30759
Compaction success                   19598       25475
Compaction failures                   7617        5283
Page migrate success                370510      464919
Page migrate failure                 25712       27987
Compaction pages isolated           849601     1041581
Compaction migrate scanned       143146541   101084990
Compaction free scanned          208355124   144863510
Compaction cost                       1403        1210

order-9:

Compaction stalls                     7311        7401
Compaction success                    1634        1683
Compaction failures                   5677        5718
Page migrate success                194657      183988
Page migrate failure                  4753        4170
Compaction pages isolated           498790      456130
Compaction migrate scanned          565371      524174
Compaction free scanned            4230296     4250744
Compaction cost                        215         203

[1] https://lwn.net/Articles/684611/

This patch (of 11):

A recent patch has added whole_zone flag that compaction sets when
scanning starts from the zone boundary, in order to report that zone has
been fully scanned in one attempt.  For allocations that want to try
really hard or cannot fail, we will want to introduce a mode where
scanning whole zone is guaranteed regardless of the cached positions.

This patch reuses the whole_zone flag in a way that if it's already
passed true to compaction, the cached scanner positions are ignored.
Employing this flag during reclaim/compaction loop will be done in the
next patch.  This patch however converts compaction invoked from
userspace via procfs to use this flag.  Before this patch, the cached
positions were first reset to zone boundaries and then read back from
struct zone, so there was a window where a parallel compaction could
replace the reset values, making the manual compaction less effective.
Using the flag instead of performing reset is more robust.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160810091226.6709-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko
5870c2e1d7 mm/oom_kill.c: fix task_will_free_mem() comment
Attempt to demystify the task_will_free_mem() loop.

Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Vladimir Davydov
58fa2a5512 mm: memcontrol: add sanity checks for memcg->id.ref on get/put
Link: http://lkml.kernel.org/r/1c5ddb1c171dbdfc3262252769d6138a29b35b70.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
zijun_hu
252e5c6e2e mm/vmalloc.c: fix align value calculation error
It causes double align requirement for __get_vm_area_node() if parameter
size is power of 2 and VM_IOREMAP is set in parameter flags, for example
size=0x10000 -> fls_long(0x10000)=17 -> align=0x20000

get_count_order_long() is implemented and can be used instead of
fls_long() for fixing the bug, for example size=0x10000 ->
get_count_order_long(0x10000)=16 -> align=0x10000

[akpm@linux-foundation.org: s/get_order_long()/get_count_order_long()/]
[zijun_hu@zoho.com: fixes]
 Link: http://lkml.kernel.org/r/57AABC8B.1040409@zoho.com
[akpm@linux-foundation.org: locate get_count_order_long() next to get_count_order()]
[akpm@linux-foundation.org: move get_count_order[_long] definitions to pick up fls_long()]
[zijun_hu@htc.com: move out get_count_order[_long]() from __KERNEL__ scope]
 Link: http://lkml.kernel.org/r/57B2C4CE.80303@zoho.com
Link: http://lkml.kernel.org/r/fc045ecf-20fa-0722-b3ac-9a6140488fad@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Vladimir Davydov
7c5f64f844 mm: oom: deduplicate victim selection code for memcg and global oom
When selecting an oom victim, we use the same heuristic for both memory
cgroup and global oom.  The only difference is the scope of tasks to
select the victim from.  So we could just export an iterator over all
memcg tasks and keep all oom related logic in oom_kill.c, but instead we
duplicate pieces of it in memcontrol.c reusing some initially private
functions of oom_kill.c in order to not duplicate all of it.  That looks
ugly and error prone, because any modification of select_bad_process
should also be propagated to mem_cgroup_out_of_memory.

Let's rework this as follows: keep all oom heuristic related code private
to oom_kill.c and make oom_kill.c use exported memcg functions when it's
really necessary (like in case of iterating over memcg tasks).

Link: http://lkml.kernel.org/r/1470056933-7505-1-git-send-email-vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Linus Torvalds
d1f5323370 Merge branch 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS splice updates from Al Viro:
 "There's a bunch of branches this cycle, both mine and from other folks
  and I'd rather send pull requests separately.

  This one is the conversion of ->splice_read() to ITER_PIPE iov_iter
  (and introduction of such). Gets rid of a lot of code in fs/splice.c
  and elsewhere; there will be followups, but these are for the next
  cycle...  Some pipe/splice-related cleanups from Miklos in the same
  branch as well"

* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  pipe: fix comment in pipe_buf_operations
  pipe: add pipe_buf_steal() helper
  pipe: add pipe_buf_confirm() helper
  pipe: add pipe_buf_release() helper
  pipe: add pipe_buf_get() helper
  relay: simplify relay_file_read()
  switch default_file_splice_read() to use of pipe-backed iov_iter
  switch generic_file_splice_read() to use of ->read_iter()
  new iov_iter flavour: pipe-backed
  fuse_dev_splice_read(): switch to add_to_pipe()
  skb_splice_bits(): get rid of callback
  new helper: add_to_pipe()
  splice: lift pipe_lock out of splice_to_pipe()
  splice: switch get_iovec_page_array() to iov_iter
  splice_to_pipe(): don't open-code wakeup_pipe_readers()
  consistent treatment of EFAULT on O_DIRECT read/write
2016-10-07 15:36:58 -07:00
Linus Torvalds
8d37059581 xfs: updates for 4.9-rc1
Included in this update:
 - change of XFS mailing list to linux-xfs@vger.kernel.org
 - iomap-based DAX infrastructure w/ XFS and ext2 support
 - small iomap fixes and additions
 - more efficient XFS delayed allocation infrastructure based on iomap
 - a rework of log recovery writeback scheduling to ensure we don't
   fail recovery when trying to replay items that are already on disk
 - some preparation patches for upcoming reflink support
 - configurable error handling fixes and documentation
 - aio access time update race fixes for XFS and generic_file_read_iter
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9WvjAAoJEK3oKUf0dfodrl8P/R1cS8tEHnrmNlKeENNWFTlN
 q8HEfP3tX43QLHXpeHd9F9qXs5/esrOFfWYFjeoAaB1cWiRXDJsUNOEH3PuQf0Go
 NKHgrL8GiU6XY9keZI6KJYphr2a5//qWJywxOeBuJh3446MDSYwOmI3eEIY8ac3/
 k0e8bMnLhfryWOvyZE6v2w75lMi+SL1LH/W6OSJqGFKS3N+GqdqRKkMfYGQToHkM
 ZgIX1vDSq4xgJzkR1Q+AACCaSTGE2wEG/bnqZ1R3l19/bERB17LaOyEegBDXbrTT
 vI31EQnrN92O/Q2eYJlap8nFIm4lVaCFTU1R7KEVEXvUBRXXfxllu1sOSBpn1PSQ
 OrC5bbcCodcG8b1SlwRrcstqc42weojqwyl65eJxOa17valghaYEcLkqEZrrrssv
 Y+C0okfL3UB2JAxG4O1nFQ3py1cYlkYURf6CuhxNQfktXZxSpAMTLy9wYCRylBiO
 Eu6Say4zfnfKiVaSg0xlMhIaAyugVH+uVro62hZYxCU2mJ/biZHeQAUC6Krl6NsY
 NsAk0T7eUgMd7lLW+C9/rL2AQaXYwR72cl/1jAWBE2piBM2Gu1lcGHGwWHvOcYjO
 K2Yg4RMnR9TDbUX2jl1r4bZoQD3IZ3HpUjgVInmbTPtKY4q89kfC40haSpBQykm7
 QzGLPvFz2sMrkmKPLbV2
 =R9uL
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs and iomap updates from Dave Chinner:
 "The main things in this update are the iomap-based DAX infrastructure,
  an XFS delalloc rework, and a chunk of fixes to how log recovery
  schedules writeback to prevent spurious corruption detections when
  recovery of certain items was not required.

  The other main chunk of code is some preparation for the upcoming
  reflink functionality. Most of it is generic and cleanups that stand
  alone, but they were ready and reviewed so are in this pull request.

  Speaking of reflink, I'm currently planning to send you another pull
  request next week containing all the new reflink functionality. I'm
  working through a similar process to the last cycle, where I sent the
  reverse mapping code in a separate request because of how large it
  was. The reflink code merge is even bigger than reverse mapping, so
  I'll be doing the same thing again....

  Summary for this update:

   - change of XFS mailing list to linux-xfs@vger.kernel.org

   - iomap-based DAX infrastructure w/ XFS and ext2 support

   - small iomap fixes and additions

   - more efficient XFS delayed allocation infrastructure based on iomap

   - a rework of log recovery writeback scheduling to ensure we don't
     fail recovery when trying to replay items that are already on disk

   - some preparation patches for upcoming reflink support

   - configurable error handling fixes and documentation

   - aio access time update race fixes for XFS and
     generic_file_read_iter"

* tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits)
  fs: update atime before I/O in generic_file_read_iter
  xfs: update atime before I/O in xfs_file_dio_aio_read
  ext2: fix possible integer truncation in ext2_iomap_begin
  xfs: log recovery tracepoints to track current lsn and buffer submission
  xfs: update metadata LSN in buffers during log recovery
  xfs: don't warn on buffers not being recovered due to LSN
  xfs: pass current lsn to log recovery buffer validation
  xfs: rework log recovery to submit buffers on LSN boundaries
  xfs: quiesce the filesystem after recovery on readonly mount
  xfs: remote attribute blocks aren't really userdata
  ext2: use iomap to implement DAX
  ext2: stop passing buffer_head to ext2_get_blocks
  xfs: use iomap to implement DAX
  xfs: refactor xfs_setfilesize
  xfs: take the ilock shared if possible in xfs_file_iomap_begin
  xfs: fix locking for DAX writes
  dax: provide an iomap based fault handler
  dax: provide an iomap based dax read/write path
  dax: don't pass buffer_head to copy_user_dax
  dax: don't pass buffer_head to dax_insert_mapping
  ...
2016-10-06 08:18:10 -07:00
Al Viro
82c156f853 switch generic_file_splice_read() to use of ->read_iter()
... and kill the ->splice_read() instances that can be switched to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-05 18:23:56 -04:00
Johannes Weiner
3ddf40e8c3 mm: filemap: fix mapping->nrpages double accounting in fuse
Commit 22f2ac51b6 ("mm: workingset: fix crash in shadow node shrinker
caused by replace_page_cache_page()") switched replace_page_cache() from
raw radix tree operations to page_cache_tree_insert() but didn't take
into account that the latter function, unlike the raw radix tree op,
handles mapping->nrpages.  As a result, that counter is bumped for each
page replacement rather than balanced out even.

The mapping->nrpages counter is used to skip needless radix tree walks
when invalidating, truncating, syncing inodes without pages, as well as
statistics for userspace.  Since the error is positive, we'll do more
page cache tree walks than necessary; we won't miss a necessary one.
And we'll report more buffer pages to userspace than there are.  The
error is limited to fuse inodes.

Fixes: 22f2ac51b6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05 09:17:56 -07:00
Johannes Weiner
d3798ae8c6 mm: filemap: don't plant shadow entries without radix tree node
When the underflow checks were added to workingset_node_shadow_dec(),
they triggered immediately:

  kernel BUG at ./include/linux/swap.h:276!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6
   soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt
  CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1
  Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
  task: ffff8faa93ecd940 task.stack: ffff8faa7f478000
  RIP: page_cache_tree_insert+0xf1/0x100
  Call Trace:
    __add_to_page_cache_locked+0x12e/0x270
    add_to_page_cache_lru+0x4e/0xe0
    mpage_readpages+0x112/0x1d0
    blkdev_readpages+0x1d/0x20
    __do_page_cache_readahead+0x1ad/0x290
    force_page_cache_readahead+0xaa/0x100
    page_cache_sync_readahead+0x3f/0x50
    generic_file_read_iter+0x5af/0x740
    blkdev_read_iter+0x35/0x40
    __vfs_read+0xe1/0x130
    vfs_read+0x96/0x130
    SyS_read+0x55/0xc0
    entry_SYSCALL_64_fastpath+0x13/0x8f
  Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00
  RIP  page_cache_tree_insert+0xf1/0x100

This is a long-standing bug in the way shadow entries are accounted in
the radix tree nodes. The shrinker needs to know when radix tree nodes
contain only shadow entries, no pages, so node->count is split in half
to count shadows in the upper bits and pages in the lower bits.

Unfortunately, the radix tree implementation doesn't know of this and
assumes all entries are in node->count. When there is a shadow entry
directly in root->rnode and the tree is later extended, the radix tree
implementation will copy that entry into the new node and and bump its
node->count, i.e. increases the page count bits. Once the shadow gets
removed and we subtract from the upper counter, node->count underflows
and triggers the warning. Afterwards, without node->count reaching 0
again, the radix tree node is leaked.

Limit shadow entries to when we have actual radix tree nodes and can
count them properly. That means we lose the ability to detect refaults
from files that had only the first page faulted in at eviction time.

Fixes: 449dd6984d ("mm: keep page cache radix tree nodes in check")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05 09:17:56 -07:00
zijun_hu
9b7396624a mm/percpu.c: fix potential memory leakage for pcpu_embed_first_chunk()
in order to ensure the percpu group areas within a chunk aren't
distributed too sparsely, pcpu_embed_first_chunk() goes to error handling
path when a chunk spans over 3/4 VMALLOC area, however, during the error
handling, it forget to free the memory allocated for all percpu groups by
going to label @out_free other than @out_free_areas.

it will cause memory leakage issue if the rare scene really happens, in
order to fix the issue, we check chunk spanned area immediately after
completing memory allocation for all percpu groups, we go to label
@out_free_areas to free the memory then return if the checking is failed.

in order to verify the approach, we dump all memory allocated then
enforce the jump then dump all memory freed, the result is okay after
checking whether we free all memory we allocate in this function.

BTW, The approach is chosen after thinking over the below scenes
 - we don't go to label @out_free directly to fix this issue since we
   maybe free several allocated memory blocks twice
 - the aim of jumping after pcpu_setup_first_chunk() is bypassing free
   usable memory other than handling error, moreover, the function does
   not return error code in any case, it either panics due to BUG_ON()
   or return 0.

Signed-off-by: zijun_hu <zijun_hu@htc.com>
Tested-by: zijun_hu <zijun_hu@htc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-05 11:52:55 -04:00
zijun_hu
93c76b6b2f mm/percpu.c: correct max_distance calculation for pcpu_embed_first_chunk()
pcpu_embed_first_chunk() calculates the range a percpu chunk spans into
@max_distance and uses it to ensure that a chunk is not too big compared
to the total vmalloc area. However, during calculation, it used incorrect
top address by adding a unit size to the highest group's base address.

This can make the calculated max_distance slightly smaller than the actual
distance although given the scale of values involved the error is very
unlikely to have an actual impact.

Fix this issue by adding the group's size instead of a unit size.

BTW, The type of variable max_distance is changed from size_t to unsigned
long too based on below consideration:
 - type unsigned long usually have same width with IP core registers and
   can be applied at here very well
 - make @max_distance type consistent with the operand calculated against
   it such as @ai->groups[i].base_offset and macro VMALLOC_TOTAL
 - type unsigned long is more universal then size_t, size_t is type defined
   to unsigned int or unsigned long among various ARCHs usually

Signed-off-by: zijun_hu <zijun_hu@htc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-05 11:52:54 -04:00
Linus Torvalds
597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Linus Torvalds
8e4ef63867 Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
 "The main changes in this cycle centered around adding support for
  32-bit compatible C/R of the vDSO on 64-bit kernels, by Dmitry
  Safonov"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Use CONFIG_X86_X32_ABI to enable vdso prctl
  x86/vdso: Only define map_vdso_randomized() if CONFIG_X86_64
  x86/vdso: Only define prctl_map_vdso() if CONFIG_CHECKPOINT_RESTORE
  x86/signal: Add SA_{X32,IA32}_ABI sa_flags
  x86/ptrace: Down with test_thread_flag(TIF_IA32)
  x86/coredump: Use pr_reg size, rather that TIF_IA32 flag
  x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
  x86/vdso: Replace calculate_addr in map_vdso() with addr
  x86/vdso: Unmap vdso blob on vvar mapping failure
2016-10-03 17:29:01 -07:00
Linus Torvalds
af79ad2b1f Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes are:

   - irqtime accounting cleanups and enhancements. (Frederic Weisbecker)

   - schedstat debugging enhancements, make it more broadly runtime
     available. (Josh Poimboeuf)

   - More work on asymmetric topology/capacity scheduling. (Morten
     Rasmussen)

   - sched/wait fixes and cleanups. (Oleg Nesterov)

   - PELT (per entity load tracking) improvements. (Peter Zijlstra)

   - Rewrite and enhance select_idle_siblings(). (Peter Zijlstra)

   - sched/numa enhancements/fixes (Rik van Riel)

   - sched/cputime scalability improvements (Stanislaw Gruszka)

   - Load calculation arithmetics fixes. (Dietmar Eggemann)

   - sched/deadline enhancements (Tommaso Cucinotta)

   - Fix utilization accounting when switching to the SCHED_NORMAL
     policy. (Vincent Guittot)

   - ... plus misc cleanups and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  sched/irqtime: Consolidate irqtime flushing code
  sched/irqtime: Consolidate accounting synchronization with u64_stats API
  u64_stats: Introduce IRQs disabled helpers
  sched/irqtime: Remove needless IRQs disablement on kcpustat update
  sched/irqtime: No need for preempt-safe accessors
  sched/fair: Fix min_vruntime tracking
  sched/debug: Add SCHED_WARN_ON()
  sched/core: Fix set_user_nice()
  sched/fair: Introduce set_curr_task() helper
  sched/core, ia64: Rename set_curr_task()
  sched/core: Fix incorrect utilization accounting when switching to fair class
  sched/core: Optimize SCHED_SMT
  sched/core: Rewrite and improve select_idle_siblings()
  sched/core: Replace sd_busy/nr_busy_cpus with sched_domain_shared
  sched/core: Introduce 'struct sched_domain_shared'
  sched/core: Restructure destroy_sched_domain()
  sched/core: Remove unused @cpu argument from destroy_sched_domain*()
  sched/wait: Introduce init_wait_entry()
  sched/wait: Avoid abort_exclusive_wait() in __wait_on_bit_lock()
  sched/wait: Avoid abort_exclusive_wait() in ___wait_event()
  ...
2016-10-03 13:39:00 -07:00
Linus Torvalds
72ec94560d Power management material for v4.9-rc1
- Add a mechanism for passing hints from the scheduler to cpufreq governors
    via their utilization update callbacks and use it to introduce "IOwait
    boosting" into the schedutil governor and intel_pstate that will make them
    boost performance if the enqueued task was previously waiting on I/O
    (Rafael Wysocki).
 
  - Fix a schedutil governor problem that causes it to overestimate utilization
    if SMT is in use (Steve Muckle).
 
  - Update defconfigs trying to use the schedutil governor as a module which is
    not possible any more (Javier Martinez Canillas).
 
  - Update the intel_pstate's pstate_sample tracepoint to take "IOwait boosting"
    into account (Srinivas Pandruvada).
 
  - Fix a problem in the cpufreq core causing it to mishandle the initialization
    of CPUs registered after the cpufreq driver (Viresh Kumar, Rafael Wysocki).
 
  - Make the cpufreq-dt driver support per-policy governor tunables, clean it
    up and update its Kconfig description (Viresh Kumar).
 
  - Add support for more ARM platforms to the cpufreq-dt driver (Chanwoo Choi,
    Dave Gerlach, Geert Uytterhoeven).
 
  - Make the cpufreq CPPC driver report frequencies in KHz to avoid user space
    compatiblility issues (Al Stone, Hoan Tran).
 
  - Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin Ian King,
    Markus Elfring).
 
  - Constify some local structures in the intel_pstate driver (Julia Lawall).
 
  - Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).
 
  - Add support for PM domain removal to the generic power domains (genpd)
    framework, add new DT helper functions to it and make it always enable
    debugfs support if available (Jon Hunter, Tomeu Vizoso).
 
  - Clean up the generic power domains (genpd) framework and make it avoid
    measuring power-on and power-off latencies during system-wide PM transitions
    (Ulf Hansson).
 
  - Add support for the RockChip DFI controller and the rk3399 DMC to the
    devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).
 
  - Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski, Stephen
    Rothwell).
 
  - Fix a minor issue in the exynos-ppmu devfreq driver and fix up devfreq
    Kconfig indentation style (Wei Yongjun, Jisheng Zhang).
 
  - Fix the system suspend interface to make suspend-to-idle work if platform
    suspend operations have not been registered (Sudeep Holla).
 
  - Make it possible to use hibernation with PAGE_POISONING_ZERO enabled
    (Anisse Astier).
 
  - Increas the default timeout of the system suspend/resume watchdog and make it
    depend on EXPERT (Chen Yu).
 
  - Make the operating performance points (OPP) framework avoid using OPPs that
    aren't supported by the platform and fix a build warning in it (Dave Gerlach,
    Arnd Bergmann).
 
  - Fix the ARM cpuidle driver's return value (Christophe Jaillet).
 
  - Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more common
    logging style (Joe Perches).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJX8Y32AAoJEILEb/54YlRx8e0P/27zu8Lb6Aks1S2Zx9GEW0qr
 DvrO4kklCHqi3DgHlyFOYetf9cxMrUluojVJofnoSDvgAayWyg7VAd4gtOrMGCXG
 pJVJM73itcOUK+DsAVvoWJY3hk15nX77n2aiXPN2GqaMqennlQusdfzTmjCasqpm
 M84j+JwFYlJcfyMCcF5kGWqS7QBjzxhA0CjytUX1i3pL3NqRALZUEpaHwBD1W+4r
 tcF/jYTy3RsghCbuC6HoPxEF9NMOFGxeAXogmu6NvGu8gy0GqtywRSRrs5wA1a0z
 ZDAJ8krrFbzuFPMdjNIE8wtTeziofS5i9piQx3JlIMH3HpNGN86BRXVfzuHzJj11
 6ZMUI/FJy+fYukIXOEeVLtsLHUnMcMux8Jq1UF6N0InahaR9nbsjmGOmXh72+Scx
 7VJ+29l0oVwX6wkw/DjPP3rb1Swd1i3yY0/3uRoJ174mYTjhRGbrbDkIjPiDeuM5
 2Cx7QunscOjFmaNtPyr8niQ+7YhMEpn8VIbGNaX5ABz0fGftfi8nDHqliSNa391Z
 nK6YoKD0O6R0JHE6GavvJTcuMS9qE+HHHOwymWKxEdE9KYk0JUqen3gj1sSTaAZT
 BIPBsn6XlorqNy3dnqtWTHV7Nf0al9huolWvrL90s6g4Bh2BzTzDVydSgNWTMDUi
 G64nP0q1sJTqdoe30uvk
 =NYkv
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "Traditionally, cpufreq is the area with the greatest number of
  changes, but there are fewer of them than last time. There also is
  some activity in the generic power domains and the devfreq frameworks,
  a couple of system suspend and hibernation fixes and some assorted
  changes in other places.

  One new feature is the cpufreq change to allow the scheduler to pass
  hints to the governors' utilization update callbacks and some code
  rework based on that. Another one is the support for domain removal in
  the generic power domains framework. Also it is now possible to use
  hibernation with PAGE_POISONING_ZERO enabled and devfreq supports the
  RockChip DFI controller and the rk3399 DMC.

  The rest of the changes is mostly fixes and cleanups in a number of
  places.

  Specifics:

   - Add a mechanism for passing hints from the scheduler to cpufreq
     governors via their utilization update callbacks and use it to
     introduce "IOwait boosting" into the schedutil governor and
     intel_pstate that will make them boost performance if the enqueued
     task was previously waiting on I/O (Rafael Wysocki).

   - Fix a schedutil governor problem that causes it to overestimate
     utilization if SMT is in use (Steve Muckle).

   - Update defconfigs trying to use the schedutil governor as a module
     which is not possible any more (Javier Martinez Canillas).

   - Update the intel_pstate's pstate_sample tracepoint to take "IOwait
     boosting" into account (Srinivas Pandruvada).

   - Fix a problem in the cpufreq core causing it to mishandle the
     initialization of CPUs registered after the cpufreq driver (Viresh
     Kumar, Rafael Wysocki).

   - Make the cpufreq-dt driver support per-policy governor tunables,
     clean it up and update its Kconfig description (Viresh Kumar).

   - Add support for more ARM platforms to the cpufreq-dt driver
     (Chanwoo Choi, Dave Gerlach, Geert Uytterhoeven).

   - Make the cpufreq CPPC driver report frequencies in KHz to avoid
     user space compatiblility issues (Al Stone, Hoan Tran).

   - Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin
     Ian King, Markus Elfring).

   - Constify some local structures in the intel_pstate driver (Julia
     Lawall).

   - Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).

   - Add support for PM domain removal to the generic power domains
     (genpd) framework, add new DT helper functions to it and make it
     always enable debugfs support if available (Jon Hunter, Tomeu
     Vizoso).

   - Clean up the generic power domains (genpd) framework and make it
     avoid measuring power-on and power-off latencies during system-wide
     PM transitions (Ulf Hansson).

   - Add support for the RockChip DFI controller and the rk3399 DMC to
     the devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).

   - Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski,
     Stephen Rothwell).

   - Fix a minor issue in the exynos-ppmu devfreq driver and fix up
     devfreq Kconfig indentation style (Wei Yongjun, Jisheng Zhang).

   - Fix the system suspend interface to make suspend-to-idle work if
     platform suspend operations have not been registered (Sudeep
     Holla).

   - Make it possible to use hibernation with PAGE_POISONING_ZERO
     enabled (Anisse Astier).

   - Increas the default timeout of the system suspend/resume watchdog
     and make it depend on EXPERT (Chen Yu).

   - Make the operating performance points (OPP) framework avoid using
     OPPs that aren't supported by the platform and fix a build warning
     in it (Dave Gerlach, Arnd Bergmann).

   - Fix the ARM cpuidle driver's return value (Christophe Jaillet).

   - Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more
     common logging style (Joe Perches)"

* tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
  PM / OPP: Don't support OPP if it provides supported-hw but platform does not
  cpufreq: st: add missing \n to end of dev_err message
  cpufreq: kirkwood: add missing \n to end of dev_err messages
  PM / Domains: Rename pm_genpd_sync_poweron|poweroff()
  PM / Domains: Don't measure latency of ->power_on|off() during system PM
  PM / Domains: Remove redundant system PM callbacks
  PM / Domains: Simplify detaching a device from its genpd
  PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
  PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
  PM / OPP: avoid maybe-uninitialized warning
  PM / Domains: Allow holes in genpd_data.domains array
  cpufreq: CPPC: Avoid overflow when calculating desired_perf
  cpufreq: ti: Use generic platdev driver
  cpufreq: intel_pstate: Add io_boost trace
  partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
  cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
  cpufreq: schedutil: Add iowait boosting
  cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
  PM / Domains: Add support for removing nested PM domains by provider
  PM / Domains: Add support for removing PM domains
  ...
2016-10-03 09:33:40 -07:00
Linus Torvalds
7af8a0f808 arm64 updates for 4.9:
- Support for execute-only page permissions
 - Support for hibernate and DEBUG_PAGEALLOC
 - Support for heterogeneous systems with mismatches cache line sizes
 - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
 - arm64 PMU perf updates, including cpumasks for heterogeneous systems
 - Set UTS_MACHINE for building rpm packages
 - Yet another head.S tidy-up
 - Some cleanups and refactoring, particularly in the NUMA code
 - Lots of random, non-critical fixes across the board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJX7k31AAoJELescNyEwWM0XX0H/iOaWCfKlWOhvBsStGUCsLrK
 XryTzQT2KjdnLKf3jwP+1ateCuBR5ROurYxoDCX5/7mD63c5KiI338Vbv61a1lE1
 AAwjt1stmQVUg/j+kqnuQwB/0DYg+2C8se3D3q5Iyn7zc19cDZJEGcBHNrvLMufc
 XgHrgHgl/rzBDDlHJXleknDFge/MfhU5/Q1vJMRRb4JYrpAtmIokzCO75CYMRcCT
 ND2QbmppKtsyuFPGUTVbAFzJlP6dGKb3eruYta7/ct5d0pJQxav3u98D2yWGfjdM
 YaYq1EmX5Pol7rWumqLtk0+mA9yCFcKLLc+PrJu20Vx0UkvOq8G8Xt70sHNvZU8=
 =gdPM
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "It's a bit all over the place this time with no "killer feature" to
  speak of.  Support for mismatched cache line sizes should help people
  seeing whacky JIT failures on some SoCs, and the big.LITTLE perf
  updates have been a long time coming, but a lot of the changes here
  are cleanups.

  We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer
  workaround is acked by Russell, the DT/OF bits are acked by Rob, the
  arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and
  jump_label by Peter (all CC'd).

  Summary:

   - Support for execute-only page permissions
   - Support for hibernate and DEBUG_PAGEALLOC
   - Support for heterogeneous systems with mismatches cache line sizes
   - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
   - arm64 PMU perf updates, including cpumasks for heterogeneous systems
   - Set UTS_MACHINE for building rpm packages
   - Yet another head.S tidy-up
   - Some cleanups and refactoring, particularly in the NUMA code
   - Lots of random, non-critical fixes across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits)
  arm64: tlbflush.h: add __tlbi() macro
  arm64: Kconfig: remove SMP dependence for NUMA
  arm64: Kconfig: select OF/ACPI_NUMA under NUMA config
  arm64: fix dump_backtrace/unwind_frame with NULL tsk
  arm/arm64: arch_timer: Use archdata to indicate vdso suitability
  arm64: arch_timer: Work around QorIQ Erratum A-008585
  arm64: arch_timer: Add device tree binding for A-008585 erratum
  arm64: Correctly bounds check virt_addr_valid
  arm64: migrate exception table users off module.h and onto extable.h
  arm64: pmu: Hoist pmu platform device name
  arm64: pmu: Probe default hw/cache counters
  arm64: pmu: add fallback probe table
  MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry
  arm64: Improve kprobes test for atomic sequence
  arm64/kvm: use alternative auto-nop
  arm64: use alternative auto-nop
  arm64: alternative: add auto-nop infrastructure
  arm64: lse: convert lse alternatives NOP padding to use __nops
  arm64: barriers: introduce nops and __nops macros for NOP sequences
  arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s
  ...
2016-10-03 08:58:35 -07:00
Christoph Hellwig
0d5b0cf246 fs: update atime before I/O in generic_file_read_iter
After the call to ->direct_IO the final reference to the file might have
been dropped by aio_complete already, and the call to file_accessed might
cause a use after free.

Instead update the access time before the I/O, similar to how we
update the time stamps before writes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-03 09:48:08 +11:00
Rafael J. Wysocki
993eb0aeae Merge branches 'pm-devfreq' and 'pm-sleep'
* pm-devfreq:
  PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
  PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
  partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
  PM / devfreq: rockchip: add devfreq driver for rk3399 dmc
  Documentation: bindings: add dt documentation for rk3399 dmc
  PM / devfreq: event: support rockchip dfi controller
  Documentation: bindings: add dt documentation for dfi controller
  PM / devfreq: event: remove duplicate devfreq_event_get_drvdata()
  PM / devfreq: fix Kconfig indent style
  PM / devfreq: Add COMPILE_TEST for build coverage
  PM / devfreq: exynos-ppmu: remove unneeded of_node_put()

* pm-sleep:
  PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO
  PM / sleep: enable suspend-to-idle even without registered suspend_ops
  PM / sleep: Increase default DPM watchdog timeout to 120
2016-10-02 01:43:45 +02:00
Johannes Weiner
22f2ac51b6 mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
Antonio reports the following crash when using fuse under memory pressure:

  kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: all of them
  CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu
  Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013
  task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000
  RIP: shadow_lru_isolate+0x181/0x190
  Call Trace:
    __list_lru_walk_one.isra.3+0x8f/0x130
    list_lru_walk_one+0x23/0x30
    scan_shadow_nodes+0x34/0x50
    shrink_slab.part.40+0x1ed/0x3d0
    shrink_zone+0x2ca/0x2e0
    kswapd+0x51e/0x990
    kthread+0xd8/0xf0
    ret_from_fork+0x3f/0x70

which corresponds to the following sanity check in the shadow node
tracking:

  BUG_ON(node->count & RADIX_TREE_COUNT_MASK);

The workingset code tracks radix tree nodes that exclusively contain
shadow entries of evicted pages in them, and this (somewhat obscure)
line checks whether there are real pages left that would interfere with
reclaim of the radix tree node under memory pressure.

While discussing ways how fuse might sneak pages into the radix tree
past the workingset code, Miklos pointed to replace_page_cache_page(),
and indeed there is a problem there: it properly accounts for the old
page being removed - __delete_from_page_cache() does that - but then
does a raw raw radix_tree_insert(), not accounting for the replacement
page.  Eventually the page count bits in node->count underflow while
leaving the node incorrectly linked to the shadow node LRU.

To address this, make sure replace_page_cache_page() uses the tracked
page insertion code, page_cache_tree_insert().  This fixes the page
accounting and makes sure page-containing nodes are properly unlinked
from the shadow node LRU again.

Also, make the sanity checks a bit less obscure by using the helpers for
checking the number of pages and shadows in a radix tree node.

Fixes: 449dd6984d ("mm: keep page cache radix tree nodes in check")
Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Debugged-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>	[3.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30 15:26:52 -07:00
Ingo Molnar
536e0e81e0 Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30 10:44:27 +02:00
Li Zhong
231e97e2b8 mem-hotplug: use nodes that contain memory as mask in new_node_page()
9bb627be47 ("mem-hotplug: don't clear the only node in new_node_page()")
prevents allocating from an empty nodemask, but as David points out, it is
still wrong.  As node_online_map may include memoryless nodes, only
allocating from these nodes is meaningless.

This patch uses node_states[N_MEMORY] mask to prevent the above case.

Fixes: 9bb627be47 ("mem-hotplug: don't clear the only node in new_node_page()")
Fixes: 394e31d2ce ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline")
Link: http://lkml.kernel.org/r/1474447117.28370.6.camel@TP420
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28 16:19:02 -07:00
zhong jiang
5b398e416e mm,ksm: fix endless looping in allocating memory when ksm enable
I hit the following hung task when runing a OOM LTP test case with 4.1
kernel.

Call trace:
[<ffffffc000086a88>] __switch_to+0x74/0x8c
[<ffffffc000a1bae0>] __schedule+0x23c/0x7bc
[<ffffffc000a1c09c>] schedule+0x3c/0x94
[<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350
[<ffffffc000a1e32c>] down_write+0x64/0x80
[<ffffffc00021f794>] __ksm_exit+0x90/0x19c
[<ffffffc0000be650>] mmput+0x118/0x11c
[<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74
[<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4
[<ffffffc0000d0f34>] get_signal+0x444/0x5e0
[<ffffffc000089fcc>] do_signal+0x1d8/0x450
[<ffffffc00008a35c>] do_notify_resume+0x70/0x78

The oom victim cannot terminate because it needs to take mmap_sem for
write while the lock is held by ksmd for read which loops in the page
allocator

ksm_do_scan
	scan_get_next_rmap_item
		down_read
		get_next_rmap_item
			alloc_rmap_item   #ksmd will loop permanently.

There is no way forward because the oom victim cannot release any memory
in 4.1 based kernel.  Since 4.6 we have the oom reaper which would solve
this problem because it would release the memory asynchronously.
Nevertheless we can relax alloc_rmap_item requirements and use
__GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan
would just retry later after the lock got dropped.

Such a patch would be also easy to backport to older stable kernels which
do not have oom_reaper.

While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed
by the allocation failure.

Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Suggested-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28 16:19:01 -07:00
Deepa Dinamani
078cd8279e fs: Replace CURRENT_TIME with current_time() for inode timestamps
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.

CURRENT_TIME is also not y2038 safe.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.

Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:21 -04:00
Miklos Szeredi
2773bf00ae fs: rename "rename2" i_op to "rename"
Generated patch:

sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2`
sed -i "s/\brename2\b/rename/g" `git grep -wl rename2`

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27 11:03:58 +02:00
Lorenzo Stoakes
38e0885465 mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
The NUMA balancing logic uses an arch-specific PROT_NONE page table flag
defined by pte_protnone() or pmd_protnone() to mark PTEs or huge page
PMDs respectively as requiring balancing upon a subsequent page fault.
User-defined PROT_NONE memory regions which also have this flag set will
not normally invoke the NUMA balancing code as do_page_fault() will send
a segfault to the process before handle_mm_fault() is even called.

However if access_remote_vm() is invoked to access a PROT_NONE region of
memory, handle_mm_fault() is called via faultin_page() and
__get_user_pages() without any access checks being performed, meaning
the NUMA balancing logic is incorrectly invoked on a non-NUMA memory
region.

A simple means of triggering this problem is to access PROT_NONE mmap'd
memory using /proc/self/mem which reliably results in the NUMA handling
functions being invoked when CONFIG_NUMA_BALANCING is set.

This issue was reported in bugzilla (issue 99101) which includes some
simple repro code.

There are BUG_ON() checks in do_numa_page() and do_huge_pmd_numa_page()
added at commit c0e7cad to avoid accidentally provoking strange
behaviour by attempting to apply NUMA balancing to pages that are in
fact PROT_NONE.  The BUG_ON()'s are consistently triggered by the repro.

This patch moves the PROT_NONE check into mm/memory.c rather than
invoking BUG_ON() as faulting in these pages via faultin_page() is a
valid reason for reaching the NUMA check with the PROT_NONE page table
flag set and is therefore not always a bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=99101
Reported-by: Trevor Saunders <tbsaunde@tbsaunde.org>
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25 15:43:42 -07:00
Linus Torvalds
0f26574178 Merge branch 'hughd-fixes' (patches from Hugh Dickins)
Merge VM fixes from High Dickins:
 "I get the impression that Andrew is away or busy at the moment, so I'm
  going to send you three independent uncontroversial little mm fixes
  directly - though none is strictly a 4.8 regression fix.

   - shmem: fix tmpfs to handle the huge= option properly from Toshi
     Kani is a one-liner to fix a major embarrassment in 4.8's hugepages
     on tmpfs feature: although Hillf pointed it out in June, somehow
     both Kirill and I repeatedly dropped the ball on this one.  You
     might wonder if the feature got tested at all with that bug in:
     yes, it did, but for wider testing coverage, Kirill and I had each
     relied too much on an override which bypasses that condition.

   - huge tmpfs: fix Committed_AS leak just a run-of-the-mill accounting
     fix in the same feature.

   - mm: delete unnecessary and unsafe init_tlb_ubc() is an unrelated
     fix to 4.3's TLB flush batching in reclaim: the bug would be rare,
     and none of us will be shamed if this one misses 4.8; but it got
     such a quick ack from Mel today that I'm inclined to offer it along
     with the first two"

* emailed patches from Hugh Dickins <hughd@google.com>:
  mm: delete unnecessary and unsafe init_tlb_ubc()
  huge tmpfs: fix Committed_AS leak
  shmem: fix tmpfs to handle the huge= option properly
2016-09-24 11:31:45 -07:00
Hugh Dickins
b385d21f27 mm: delete unnecessary and unsafe init_tlb_ubc()
init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically
initialized with zeroes in the init_task, and copied from parent to
child while it is quiescent in arch_dup_task_struct(); so I went to
delete it.

But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to
check that it was always empty at that point, and found them firing:
because memcg reclaim can recurse into global reclaim (when allocating
biosets for swapout in my case), and arrive back at the init_tlb_ubc()
in shrink_node_memcg().

Resetting tlb_ubc.flush_required at that point is wrong: if the upper
level needs a deferred TLB flush, but the lower level turns out not to,
we miss a TLB flush.  But fortunately, that's the only part of the
protocol that does not nest: with the initialization removed, cpumask
collects bits from upper and lower levels, and flushes TLB when needed.

Fixes: 72b252aed5 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-24 11:20:01 -07:00
Hugh Dickins
71664665c3 huge tmpfs: fix Committed_AS leak
Under swapping load on huge tmpfs, /proc/meminfo's Committed_AS grows
bigger and bigger: just a cosmetic issue for most users, but disabling
for those who run without overcommit (/proc/sys/vm/overcommit_memory 2).

shmem_uncharge() was forgetting to unaccount __vm_enough_memory's
charge, and shmem_charge() was forgetting it on the filesystem-full
error path.

Fixes: 800d8c63b2 ("shmem: add huge pages support")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-24 11:20:01 -07:00
Toshi Kani
3089bf614c shmem: fix tmpfs to handle the huge= option properly
shmem_get_unmapped_area() checks SHMEM_SB(sb)->huge incorrectly, which
leads to a reversed effect of "huge=" mount option.

Fix the check in shmem_get_unmapped_area().

Note, the default value of SHMEM_SB(sb)->huge remains as
SHMEM_HUGE_NEVER.  User will need to specify "huge=" option to enable
huge page mappings.

Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-24 11:20:01 -07:00
Ingo Molnar
50797851b4 Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-22 14:49:40 +02:00
Jan Kara
31051c85b5 fs: Give dentry to inode_change_ok() instead of inode
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2016-09-22 10:56:19 +02:00
Laura Abbott
aa4f060111 mm: usercopy: Check for module addresses
While running a compile on arm64, I hit a memory exposure

usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes)
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:75!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in: ip6t_rpfilter ip6t_REJECT
nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp
llc ebtable_nat ip6table_security ip6table_raw ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle
iptable_security iptable_raw iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle
ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac
xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma
mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd
auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan
sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys
CPU: 0 PID: 19744 Comm: updatedb Tainted: G        W 4.8.0-rc3-threadinfo+ #1
Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016
task: fffffe03df944c00 task.stack: fffffe00d128c000
PC is at __check_object_size+0x70/0x3f0
LR is at __check_object_size+0x70/0x3f0
...
[<fffffc00082b4280>] __check_object_size+0x70/0x3f0
[<fffffc00082cdc30>] filldir64+0x158/0x1a0
[<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat]
[<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat]
[<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0
[<fffffc00082cde58>] SyS_getdents64+0x88/0x120
[<fffffc0008082c70>] el0_svc_naked+0x24/0x28

fffffc0000f3b1a8 is a module address. Modules may have compiled in
strings which could get copied to userspace. In this instance, it
looks like "." which matches with a size of 1 byte. Extend the
is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover
all possible cases.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-20 16:07:39 -07:00
Johannes Weiner
db2ba40c27 mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting
During cgroup2 rollout into production, we started encountering css
refcount underflows and css access crashes in the memory controller.
Splitting the heavily shared css reference counter into logical users
narrowed the imbalance down to the cgroup2 socket memory accounting.

The problem turns out to be the per-cpu charge cache.  Cgroup1 had a
separate socket counter, but the new cgroup2 socket accounting goes
through the common charge path that uses a shared per-cpu cache for all
memory that is being tracked.  Those caches are safe against scheduling
preemption, but not against interrupts - such as the newly added packet
receive path.  When cache draining is interrupted by network RX taking
pages out of the cache, the resuming drain operation will put references
of in-use pages, thus causing the imbalance.

Disable IRQs during all per-cpu charge cache operations.

Fixes: f7e1cb6ec5 ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:17 -07:00
Santosh Shilimkar
c8de641b1e mm: fix the page_swap_info() BUG_ON check
Commit 62c230bc17 ("mm: add support for a filesystem to activate
swap files and use direct_IO for writing swap pages") replaced the
swap_aops dirty hook from __set_page_dirty_no_writeback() with
swap_set_page_dirty().

For normal cases without these special SWP flags code path falls back to
__set_page_dirty_no_writeback() so the behaviour is expected to be the
same as before.

But swap_set_page_dirty() makes use of the page_swap_info() helper to
get the swap_info_struct to check for the flags like SWP_FILE,
SWP_BLKDEV etc as desired for those features.  This helper has
BUG_ON(!PageSwapCache(page)) which is racy and safe only for the
set_page_dirty_lock() path.

For the set_page_dirty() path which is often needed for cases to be
called from irq context, kswapd() can toggle the flag behind the back
while the call is getting executed when system is low on memory and
heavy swapping is ongoing.

This ends up with undesired kernel panic.

This patch just moves the check outside the helper to its users
appropriately to fix kernel panic for the described path.  Couple of
users of helpers already take care of SwapCache condition so I skipped
them.

Link: http://lkml.kernel.org/r/1473460718-31013-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rik van Riel <riel@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jens Axboe <axboe@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>	[4.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:17 -07:00
Kirill A. Shutemov
4d35427ad7 mm: avoid endless recursion in dump_page()
dump_page() uses page_mapcount() to get mapcount of the page.
page_mapcount() has VM_BUG_ON_PAGE(PageSlab(page)) as mapcount doesn't
make sense for slab pages and the field in struct page used for other
information.

It leads to recursion if dump_page() called for slub page and DEBUG_VM
is enabled:

dump_page() -> page_mapcount() -> VM_BUG_ON_PAGE() -> dump_page -> ...

Let's avoid calling page_mapcount() for slab pages in dump_page().

Link: http://lkml.kernel.org/r/20160908082137.131076-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:16 -07:00
Ebru Akagunduz
982785c6b0 mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin()
Currently, khugepaged does not permit swapin if there are enough young
pages in a THP.  The problem is when a THP does not have enough young
pages, khugepaged leaks mapped ptes.

This patch prohibits leaking mapped ptes.

Link: http://lkml.kernel.org/r/1472820276-7831-1-git-send-email-ebru.akagunduz@gmail.com
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:16 -07:00
Kirill A. Shutemov
c131f751ab khugepaged: fix use-after-free in collapse_huge_page()
hugepage_vma_revalidate() tries to re-check if we still should try to
collapse small pages into huge one after the re-acquiring mmap_sem.

The problem Dmitry Vyukov reported[1] is that the vma found by
hugepage_vma_revalidate() can be suitable for huge pages, but not the
same vma we had before dropping mmap_sem.  And dereferencing original
vma can lead to fun results..

Let's use vma hugepage_vma_revalidate() found instead of assuming it's the
same as what we had before the lock was dropped.

[1] http://lkml.kernel.org/r/CACT4Y+Z3gigBvhca9kRJFcjX0G70V_nRhbwKBU+yGoESBDKi9Q@mail.gmail.com

Link: http://lkml.kernel.org/r/20160907122559.GA6542@black.fi.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:16 -07:00
Li Zhong
9bb627be47 mem-hotplug: don't clear the only node in new_node_page()
Commit 394e31d2ce ("mem-hotplug: alloc new page from a nearest
neighbor node when mem-offline") introduced new_node_page() for memory
hotplug.

In new_node_page(), the nid is cleared before calling
__alloc_pages_nodemask().  But if it is the only node of the system, and
the first round allocation fails, it will not be able to get memory from
an empty nodemask, and will trigger oom.

The patch checks whether it is the last node on the system, and if it
is, then don't clear the nid in the nodemask.

Fixes: 394e31d2ce ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline")
Link: http://lkml.kernel.org/r/1473044391.4250.19.camel@TP420
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Reported-by: John Allen <jallen@linux.vnet.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19 15:36:16 -07:00
Dmitry Safonov
2eefd87896 x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
Add API to change vdso blob type with arch_prctl.
As this is usefull only by needs of CRIU, expose
this interface under CONFIG_CHECKPOINT_RESTORE.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: oleg@redhat.com
Cc: linux-mm@kvack.org
Cc: gorcunov@openvz.org
Cc: xemul@virtuozzo.com
Link: http://lkml.kernel.org/r/20160905133308.28234-4-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 21:28:09 +02:00
Rik van Riel
d59dc7bcfa sched/numa, mm: Revert to checking pmd/pte_write instead of VMA flags
Commit:

  4d94246699 ("mm: convert p[te|md]_mknonnuma and remaining page table manipulations")

changed NUMA balancing from _PAGE_NUMA to using PROT_NONE, and was quickly
found to introduce a regression with NUMA grouping.

It was followed up by these commits:

 53da3bc2ba ("mm: fix up numa read-only thread grouping logic")
 bea66fbd11 ("mm: numa: group related processes based on VMA flags instead of page table flags")
 b191f9b106 ("mm: numa: preserve PTE write permissions across a NUMA hinting fault")

The first of those two commits try alternate approaches to NUMA
grouping, which apparently do not work as well as looking at the PTE
write permissions.

The latter patch preserves the PTE write permissions across a NUMA
protection fault. However, it forgets to revert the condition for
whether or not to group tasks together back to what it was before
v3.19, even though the information is now preserved in the page tables
once again.

This patch brings the NUMA grouping heuristic back to what it was
before commit 4d94246699, which the changelogs of subsequent
commits suggest worked best.

We have all the information again. We should probably use it.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aarcange@redhat.com
Cc: linux-mm@kvack.org
Cc: mgorman@suse.de
Link: http://lkml.kernel.org/r/20160908213053.07c992a9@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-13 20:31:33 +02:00
Anisse Astier
1ad1410f63 PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO
PAGE_POISONING_ZERO disables zeroing new pages on alloc, they are
poisoned (zeroed) as they become available.
In the hibernate use case, free pages will appear in the system without
being cleared, left there by the loading kernel.

This patch will make sure free pages are cleared on resume when
PAGE_POISONING_ZERO is enabled. We free the pages just after resume
because we can't do it later: going through any device resume code might
allocate some memory and invalidate the free pages bitmap.

Thus we don't need to disable hibernation when PAGE_POISONING_ZERO is
enabled.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13 02:35:27 +02:00
Linus Torvalds
98ac9a608d Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
 "nvdimm fixes for v4.8, two of them are tagged for -stable:

   - Fix devm_memremap_pages() to use track_pfn_insert().  Otherwise,
     DAX pmd mappings end up with an uncached pgprot, and unusable
     performance for the device-dax interface.  The device-dax interface
     appeared in 4.7 so this is tagged for -stable.

   - Fix a couple VM_BUG_ON() checks in the show_smaps() path to
     understand DAX pmd entries.  This fix is tagged for -stable.

   - Fix a mis-merge of the nfit machine-check handler to flip the
     polarity of an if() to match the final version of the patch that
     Vishal sent for 4.8-rc1.  Without this the nfit machine check
     handler never detects / inserts new 'badblocks' entries which
     applications use to identify lost portions of files.

   - For test purposes, fix the nvdimm_clear_poison() path to operate on
     legacy / simulated nvdimm memory ranges.  Without this fix a test
     can set badblocks, but never clear them on these ranges.

   - Fix the range checking done by dax_dev_pmd_fault().  This is not
     tagged for -stable since this problem is mitigated by specifying
     aligned resources at device-dax setup time.

  These patches have appeared in a next release over the past week.  The
  recent rebase you can see in the timestamps was to drop an invalid fix
  as identified by the updated device-dax unit tests [1].  The -mm
  touches have an ack from Andrew"

[1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs"
   https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm: allow legacy (e820) pmem region to clear bad blocks
  nfit, mce: Fix SPA matching logic in MCE handler
  mm: fix cache mode of dax pmd mappings
  mm: fix show_smap() for zone_device-pmd ranges
  dax: fix mapping size check
2016-09-10 09:58:52 -07:00
Dan Williams
ca120cf688 mm: fix show_smap() for zone_device-pmd ranges
Attempting to dump /proc/<pid>/smaps for a process with pmd dax mappings
currently results in the following VM_BUG_ONs:

 kernel BUG at mm/huge_memory.c:1105!
 task: ffff88045f16b140 task.stack: ffff88045be14000
 RIP: 0010:[<ffffffff81268f9b>]  [<ffffffff81268f9b>] follow_trans_huge_pmd+0x2cb/0x340
 [..]
 Call Trace:
  [<ffffffff81306030>] smaps_pte_range+0xa0/0x4b0
  [<ffffffff814c2755>] ? vsnprintf+0x255/0x4c0
  [<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0
  [<ffffffff8123c8a2>] walk_page_vma+0x62/0x80
  [<ffffffff81307656>] show_smap+0xa6/0x2b0

 kernel BUG at fs/proc/task_mmu.c:585!
 RIP: 0010:[<ffffffff81306469>]  [<ffffffff81306469>] smaps_pte_range+0x499/0x4b0
 Call Trace:
  [<ffffffff814c2795>] ? vsnprintf+0x255/0x4c0
  [<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0
  [<ffffffff8123c8a2>] walk_page_vma+0x62/0x80
  [<ffffffff81307696>] show_smap+0xa6/0x2b0

These locations are sanity checking page flags that must be set for an
anonymous transparent huge page, but are not set for the zone_device
pages associated with dax mappings.

Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-09 17:34:45 -07:00
Dave Hansen
e8c24d3a23 x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:

	int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
	int pkey_free(int pkey);

These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors.  The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid.  A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().

These system calls are also very important given the kernel's use
of pkeys to implement execute-only support.  These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel.  The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.

The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey.  For
instance:

	pkey = pkey_alloc(flags, PKEY_DENY_WRITE);

will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.

The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()).  It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.

Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail.  Why?  pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this.  Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.

This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings).  Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.

Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.

1. PKRU is the Protection Key Rights User register.  It is a
   usermode-accessible register that controls whether writes
   and/or access to each individual pkey is allowed or denied.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-09 13:02:27 +02:00
Dave Hansen
a8502b67d7 x86/pkeys: Make mprotect_key() mask off additional vm_flags
Today, mprotect() takes 4 bits of data: PROT_READ/WRITE/EXEC/NONE.
Three of those bits: READ/WRITE/EXEC get translated directly in to
vma->vm_flags by calc_vm_prot_bits().  If a bit is unset in
mprotect()'s 'prot' argument then it must be cleared in vma->vm_flags
during the mprotect() call.

We do this clearing today by first calculating the VMA flags we
want set, then clearing the ones we do not want to inherit from
the original VMA:

	vm_flags = calc_vm_prot_bits(prot, key);
	...
	newflags = vm_flags;
	newflags |= (vma->vm_flags & ~(VM_READ | VM_WRITE | VM_EXEC));

However, we *also* want to mask off the original VMA's vm_flags in
which we store the protection key.

To do that, this patch adds a new macro:

	ARCH_VM_PKEY_FLAGS

which allows the architecture to specify additional bits that it would
like cleared.  We use that to ensure that the VM_PKEY_BIT* bits get
cleared.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163013.E48D6981@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-09 13:02:26 +02:00
Dave Hansen
7d06d9c9bd mm: Implement new pkey_mprotect() system call
pkey_mprotect() is just like mprotect, except it also takes a
protection key as an argument.  On systems that do not support
protection keys, it still works, but requires that key=0.
Otherwise it does exactly what mprotect does.

I expect it to get used like this, if you want to guarantee that
any mapping you create can *never* be accessed without the right
protection keys set up.

	int real_prot = PROT_READ|PROT_WRITE;
	pkey = pkey_alloc(0, PKEY_DENY_ACCESS);
	ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
	ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey);

This way, there is *no* window where the mapping is accessible
since it was always either PROT_NONE or had a protection key set
that denied all access.

We settled on 'unsigned long' for the type of the key here.  We
only need 4 bits on x86 today, but I figured that other
architectures might need some more space.

Semantically, we have a bit of a problem if we combine this
syscall with our previously-introduced execute-only support:
What do we do when we mix execute-only pkey use with
pkey_mprotect() use?  For instance:

	pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6
	mprotect(ptr, PAGE_SIZE, PROT_EXEC);  // set pkey=X_ONLY_PKEY?
	mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again?

To solve that, we make the plain-mprotect()-initiated execute-only
support only apply to VMAs that have the default protection key (0)
set on them.

Proposed semantics:
1. protection key 0 is special and represents the default,
   "unassigned" protection key.  It is always allocated.
2. mprotect() never affects a mapping's pkey_mprotect()-assigned
   protection key. A protection key of 0 (even if set explicitly)
   represents an unassigned protection key.
   2a. mprotect(PROT_EXEC) on a mapping with an assigned protection
       key may or may not result in a mapping with execute-only
       properties.  pkey_mprotect() plus pkey_set() on all threads
       should be used to _guarantee_ execute-only semantics if this
       is not a strong enough semantic.
3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The
   kernel will internally attempt to allocate and dedicate a
   protection key for the purpose of execute-only mappings.  This
   may not be possible in cases where there are no free protection
   keys available.  It can also happen, of course, in situations
   where there is no hardware support for protection keys.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-09 13:02:26 +02:00
Kees Cook
8e1f74ea02 usercopy: remove page-spanning test for now
A custom allocator without __GFP_COMP that copies to userspace has been
found in vmw_execbuf_process[1], so this disables the page-span checker
by placing it behind a CONFIG for future work where such things can be
tracked down later.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326

Reported-by: Vinson Lee <vlee@freedesktop.org>
Fixes: f5509cc18d ("mm: Hardened usercopy")
Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07 11:33:26 -07:00
Sebastian Andrzej Siewior
1d7ac6aec9 mm/writeback: Convert to hotplug state machine
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20160818125731.27256-6-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:20 +02:00
Sebastian Andrzej Siewior
a96a87bf94 slub: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20160818125731.27256-5-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:20 +02:00
Sebastian Andrzej Siewior
6731d4f123 slab: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/20160823125319.abeapfjapf2kfezp@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:20 +02:00
David Rientjes
c11600e4fe mm, mempolicy: task->mempolicy must be NULL before dropping final reference
KASAN allocates memory from the page allocator as part of
kmem_cache_free(), and that can reference current->mempolicy through any
number of allocation functions.  It needs to be NULL'd out before the
final reference is dropped to prevent a use-after-free bug:

	BUG: KASAN: use-after-free in alloc_pages_current+0x363/0x370 at addr ffff88010b48102c
	CPU: 0 PID: 15425 Comm: trinity-c2 Not tainted 4.8.0-rc2+ #140
	...
	Call Trace:
		dump_stack
		kasan_object_err
		kasan_report_error
		__asan_report_load2_noabort
		alloc_pages_current	<-- use after free
		depot_save_stack
		save_stack
		kasan_slab_free
		kmem_cache_free
		__mpol_put		<-- free
		do_exit

This patch sets current->mempolicy to NULL before dropping the final
reference.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1608301442180.63329@chino.kir.corp.google.com
Fixes: cd11016e5f ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01 17:52:01 -07:00
Mel Gorman
6aa303defb mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator
Firmware Assisted Dump (FA_DUMP) on ppc64 reserves substantial amounts
of memory when booting a secondary kernel.  Srikar Dronamraju reported
that multiple nodes may have no memory managed by the buddy allocator
but still return true for populated_zone().

Commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") was reported to cause kswapd to spin at 100% CPU usage when
fadump was enabled.  The old code happened to deal with the situation of
a populated node with zero free pages by co-incidence but the current
code tries to reclaim populated zones without realising that is
impossible.

We cannot just convert populated_zone() as many existing users really
need to check for present_pages.  This patch introduces a managed_zone()
helper and uses it in the few cases where it is critical that the check
is made for managed pages -- zonelist construction and page reclaim.

Link: http://lkml.kernel.org/r/20160831195104.GB8119@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01 17:52:01 -07:00
Michal Hocko
6b4e3181d7 mm, oom: prevent premature OOM killer invocation for high order request
There have been several reports about pre-mature OOM killer invocation
in 4.7 kernel when order-2 allocation request (for the kernel stack)
invoked OOM killer even during basic workloads (light IO or even kernel
compile on some filesystems).  In all reported cases the memory is
fragmented and there are no order-2+ pages available.  There is usually
a large amount of slab memory (usually dentries/inodes) and further
debugging has shown that there are way too many unmovable blocks which
are skipped during the compaction.  Multiple reporters have confirmed
that the current linux-next which includes [1] and [2] helped and OOMs
are not reproducible anymore.

A simpler fix for the late rc and stable is to simply ignore the
compaction feedback and retry as long as there is a reclaim progress and
we are not getting OOM for order-0 pages.  We already do that for
CONFING_COMPACTION=n so let's reuse the same code when compaction is
enabled as well.

[1] http://lkml.kernel.org/r/20160810091226.6709-1-vbabka@suse.cz
[2] http://lkml.kernel.org/r/f7a9ea9d-bb88-bfd6-e340-3a933559305a@suse.cz

Fixes: 0a0337e0d1 ("mm, oom: rework oom detection")
Link: http://lkml.kernel.org/r/20160823074339.GB23577@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Tested-by: Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Cc: Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[4.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01 17:52:01 -07:00
Ross Zwisler
11bd969fde mm: silently skip readahead for DAX inodes
For DAX inodes we need to be careful to never have page cache pages in
the mapping->page_tree.  This radix tree should be composed only of DAX
exceptional entries and zero pages.

ltp's readahead02 test was triggering a warning because we were trying
to insert a DAX exceptional entry but found that a page cache page had
already been inserted into the tree.  This page was being inserted into
the radix tree in response to a readahead(2) call.

Readahead doesn't make sense for DAX inodes, but we don't want it to
report a failure either.  Instead, we just return success and don't do
any work.

Link: http://lkml.kernel.org/r/20160824221429.21158-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26 17:39:35 -07:00
Arnd Bergmann
358c07fcc3 mm: memcontrol: avoid unused function warning
A bugfix in v4.8-rc2 introduced a harmless warning when
CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled:

  mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function]
   static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)

This moves the function inside of the #ifdef block that hides the
calling function, to avoid the warning.

Fixes: 1f47b61fb4 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup")
Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26 17:39:35 -07:00
Michal Hocko
b32eaf71db mm: clarify COMPACTION Kconfig text
The current wording of the COMPACTION Kconfig help text doesn't
emphasise that disabling COMPACTION might cripple the page allocator
which relies on the compaction quite heavily for high order requests and
an unexpected OOM can happen with the lack of compaction.  Make sure we
are vocal about that.

Link: http://lkml.kernel.org/r/20160823091726.GK23577@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26 17:39:35 -07:00
Andrea Arcangeli
804dd15046 soft_dirty: fix soft_dirty during THP split
While adding proper userfaultfd_wp support with bits in pagetable and
swap entry to avoid false positives WP userfaults through swap/fork/
KSM/etc, I've been adding a framework that mostly mirrors soft dirty.

So I noticed in one place I had to add uffd_wp support to the pagetables
that wasn't covered by soft_dirty and I think it should have.

Example: in the THP migration code migrate_misplaced_transhuge_page()
pmd_mkdirty is called unconditionally after mk_huge_pmd.

	entry = mk_huge_pmd(new_page, vma->vm_page_prot);
	entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);

That sets soft dirty too (it's a false positive for soft dirty, the soft
dirty bit could be more finegrained and transfer the bit like uffd_wp
will do..  pmd/pte_uffd_wp() enforces the invariant that when it's set
pmd/pte_write is not set).

However in the THP split there's no unconditional pmd_mkdirty after
mk_huge_pmd and pte_swp_mksoft_dirty isn't called after the migration
entry is created.  The code sets the dirty bit in the struct page
instead of setting it in the pagetable (which is fully equivalent as far
as the real dirty bit is concerned, as the whole point of pagetable bits
is to be eventually flushed out of to the page, but that is not
equivalent for the soft-dirty bit that gets lost in translation).

This was found by code review only and totally untested as I'm working
to actually replace soft dirty and I don't have time to test potential
soft dirty bugfixes as well :).

Transfer the soft_dirty from pmd to pte during THP splits.

This fix avoids losing the soft_dirty bit and avoids userland memory
corruption in the checkpoint.

Fixes: eef1b3ba05 ("thp: implement split_huge_pmd()")
Link: http://lkml.kernel.org/r/1471610515-30229-2-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26 17:39:35 -07:00