There are a few issues in this code. If *ppos is non-zero then the
first part of the buffer is not initialized. We never initialize the
last character of the buffer. The return is not checked so it's
possible that none of the buffer is initialized.
This is debugfs code which is root only and the impact of these bugs is
very small. However, it's still worth fixing. To fix this:
1) Check that *ppos is zero.
2) Use copy_from_user() instead of simple_write_to_buffer().
3) Explicitly add a NUL terminator.
Fixes: e2b67859ab ("crypto: qat - add heartbeat error simulator")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Errors can potentially occur in the "processing" of PSP commands or
commands can be processed successfully but still return an error code in
the header.
This second case was being discarded because PSP communication worked but
the command returned an error code in the payload header.
Capture both cases and return them to the caller as -EIO for the caller
to investigate. The caller can detect the latter by looking at
`req->header->status`.
Reported-and-tested-by: Tim Van Patten <timvp@google.com>
Fixes: 7ccc4f4e2e ("crypto: ccp - Add support for an interface for platform features")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During the PCI AER system's error recovery process, the kernel driver
may encounter a race condition with freeing the reset_data structure's
memory. If the device restart will take more than 10 seconds the function
scheduling that restart will exit due to a timeout, and the reset_data
structure will be freed. However, this data structure is used for
completion notification after the restart is completed, which leads
to a UAF bug.
This results in a KFENCE bug notice.
BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat]
Use-after-free read at 0x00000000bc56fddf (in kfence-#142):
adf_device_reset_worker+0x38/0xa0 [intel_qat]
process_one_work+0x173/0x340
To resolve this race condition, the memory associated to the container
of the work_struct is freed on the worker if the timeout expired,
otherwise on the function that schedules the worker.
The timeout detection can be done by checking if the caller is
still waiting for completion or not by using completion_done() function.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The implementation of the Rate Limiting (RL) feature includes the cleanup
of all SLAs during device shutdown. For each SLA, the firmware is notified
of the removal through an admin message, the data structures that take
into account the budgets are updated and the memory is freed.
However, this explicit cleanup is not necessary as (1) the device is
reset, and the firmware state is lost and (2) all RL data structures
are freed anyway.
In addition, if the device is unresponsive, for example after a PCI
AER error is detected, the admin interface might not be available.
This might slow down the shutdown sequence and cause a timeout in
the recovery flows which in turn makes the driver believe that the
device is not recoverable.
Fix by replacing the explicit SLAs removal with just a free of the
SLA data structures.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function qm_stop_qp_nolock() always return zero, so
function type is changed to void.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs files 'dev_state' and 'dev_timeout' are added.
Users can query the current queue stop status through these two
files. And set the waiting timeout when the queue is released.
dev_state: if dev_timeout is set, dev_state indicates the status
of stopping the queue. 0 indicates that the queue is stopped
successfully. Other values indicate that the queue stops fail.
If dev_timeout is not set, the value of dev_state is 0;
dev_timeout: if the queue fails to stop, the queue is released
after waiting dev_timeout * 20ms.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware V3 could be able to drain function by sending mailbox
to hardware which will trigger tasks in device to be flushed out.
When the function is reset, the function can be stopped by this way.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the case when only TSME is enabled, it is useful to state that fact
too, so that users are aware that memory encryption is still enabled
even when the corresponding software variant of memory encryption is not
enabled.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sev-dev.c calls code in the AMD IOMMU now but that can't really work if
latter is not enabled in Kconfig:
ld: vmlinux.o: in function `__sev_firmware_shutdown.isra.0':
sev-dev.c:(.text+0x2501f0e): undefined reference to `amd_iommu_snp_disable'
ld: vmlinux.o: in function `snp_rmptable_init':
sev.c:(.init.text+0x26260): undefined reference to `amd_iommu_snp_en'
make[2]: *** [scripts/Makefile.vmlinux:37: vmlinux] Error 1
make: *** [Makefile:240: __sub-make] Error 2
Fix those deps.
Fixes: f366a8dac1 ("iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240207204721.6189-1-bp@alien8.de
Rework the AER reset and recovery flow to take into account root port
integrated devices that gets reset between the error detected and the
slot reset callbacks.
In adf_error_detected() the devices is gracefully shut down. The worker
threads are disabled, the error conditions are notified to listeners and
through PFVF comms and finally the device is reset as part of
adf_dev_down().
In adf_slot_reset(), the device is brought up again. If SRIOV VFs were
enabled before reset, these are re-enabled and VFs are notified of
restarting through PFVF comms.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the driver detects an heartbeat failure, it starts the recovery
flow. Set a limit so that the number of events is limited in case the
heartbeat status is read too frequently.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the `auto_reset` sysfs attribute to configure the driver to reset
the device when a fatal error is detected.
When auto reset is enabled, the driver resets the device when it detects
either an heartbeat failure or a fatal error through an interrupt.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Notify a fatal error condition and optionally reset the device in
the following cases:
* if the device reports an uncorrectable fatal error through an
interrupt
* if the heartbeat feature detects that the device is not
responding
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a Physical Function (PF) is reset, SR-IOV gets disabled, making the
associated Virtual Functions (VFs) unavailable. Even after reset and
using pci_restore_state, VFs remain uncreated because the numvfs still
at 0. Therefore, it's necessary to reconfigure SR-IOV to re-enable VFs.
This commit introduces the ADF_SRIOV_ENABLED configuration flag to cache
the SR-IOV enablement state. SR-IOV is only re-enabled if it was
previously configured.
This commit also introduces a dedicated workqueue without
`WQ_MEM_RECLAIM` flag for enabling SR-IOV during Heartbeat and CPM error
resets, preventing workqueue flushing warning.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the PFVF logic to handle restart and recovery. This adds the
following functions:
* adf_pf2vf_notify_fatal_error(): allows the PF to notify VFs that the
device detected a fatal error and requires a reset. This sends to
VF the event `ADF_PF2VF_MSGTYPE_FATAL_ERROR`.
* adf_pf2vf_wait_for_restarting_complete(): allows the PF to wait for
`ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE` events from active VFs
before proceeding with a reset.
* adf_pf2vf_notify_restarted(): enables the PF to notify VFs with
an `ADF_PF2VF_MSGTYPE_RESTARTED` event after recovery, indicating that
the device is back to normal. This prompts VF drivers switch back to
use the accelerator for workload processing.
These changes improve the communication and synchronization between PF
and VF drivers during system restart and recovery processes.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disable arbitration to avoid new requests to be processed before
resetting a device.
This is needed so that new requests are not fetched when an error is
detected.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add error notify method to report a fatal error event to all the
subsystems registered. In addition expose an API,
adf_notify_fatal_error(), that allows to trigger a fatal error
notification asynchronously in the context of a workqueue.
This will be invoked when a fatal error is detected by the ISR or
through Heartbeat.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a mechanism that allows to inject a heartbeat error for testing
purposes.
A new attribute `inject_error` is added to debugfs for each QAT device.
Upon a write on this attribute, the driver will inject an error on the
device which can then be detected by the heartbeat feature.
Errors are breaking the device functionality thus they require a
device reset in order to be recovered.
This functionality is not compiled by default, to enable it
CRYPTO_DEV_QAT_ERROR_INJECTION must be set.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sizeof(struct virtio_crypto_akcipher_session_para) is less than
sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from
stack variable leads stack overflow. Clang reports this issue by
commands:
make -j CC=clang-14 mrproper >/dev/null 2>&1
make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1
make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/
virtio_crypto_akcipher_algs.o
Fixes: 59ca6c9338 ("virtio-crypto: implement RSA algorithm")
Link: https://lore.kernel.org/all/0a194a79-e3a3-45e7-be98-83abd3e1cb7e@roeck-us.net/
Cc: <stable@vger.kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unused parameter of static functions should be removed.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes following cleanup issues:
- The return value of the function is
inconsistent with the actual return type.
- After the pointer type is directly converted
to the `__le64` type, the program may crash
or produce unexpected results.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nested macros are integrated into a single macro,
making the code simpler.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As the sec DFX function is enhanced, some RAS registers are added
to the original DFX registers to enhance the DFX positioning function.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEV-SNP firmware provides the SNP_CONFIG command used to set various
system-wide configuration values for SNP guests, such as the reported
TCB version used when signing guest attestation reports. Add an
interface to set this via userspace.
[ mdr: Squash in doc patch from Dionna, drop extended request/
certificate handling and simplify this to a simple wrapper around
SNP_CONFIG fw cmd. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-26-michael.roth@amd.com
The SNP_COMMIT command is used to commit the currently installed version
of the SEV firmware. Once committed, the firmware cannot be replaced
with a previous firmware version (cannot be rolled back). This command
will also update the reported TCB to match that of the currently
installed firmware.
[ mdr: Note the reported TCB update in the documentation/commit. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-25-michael.roth@amd.com
This command is used to query the SNP platform status. See the SEV-SNP
spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-24-michael.roth@amd.com
Add a kdump safe version of sev_firmware_shutdown() and register it as a
crash_kexec_post_notifier so it will be invoked during panic/crash to do
SEV/SNP shutdown. This is required for transitioning all IOMMU pages to
reclaim/hypervisor state, otherwise re-init of IOMMU pages during
crashdump kernel boot fails and panics the crashdump kernel.
This panic notifier runs in atomic context, hence it ensures not to
acquire any locks/mutexes and polls for PSP command completion instead
of depending on PSP command completion interrupt.
[ mdr: Remove use of "we" in comments. ]
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-21-michael.roth@amd.com
Add a new IOMMU API interface amd_iommu_snp_disable() to transition
IOMMU pages to Hypervisor state from Reclaim state after SNP_SHUTDOWN_EX
command. Invoke this API from the CCP driver after SNP_SHUTDOWN_EX
command.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-20-michael.roth@amd.com
The behavior of legacy SEV commands is altered when the firmware is
initialized for SNP support. In that case, all command buffer memory
that may get written to by legacy SEV commands must be marked as
firmware-owned in the RMP table prior to issuing the command.
Additionally, when a command buffer contains a system physical address
that points to additional buffers that firmware may write to, special
handling is needed depending on whether:
1) the system physical address points to guest memory
2) the system physical address points to host memory
To handle case #1, the pages of these buffers are changed to
firmware-owned in the RMP table before issuing the command, and restored
to hypervisor-owned after the command completes.
For case #2, a bounce buffer is used instead of the original address.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-19-michael.roth@amd.com
For SEV/SEV-ES, a buffer can be used to access non-volatile data so it
can be initialized from a file specified by the init_ex_path CCP module
parameter instead of relying on the SPI bus for NV storage, and
afterward the buffer can be read from to sync new data back to the file.
When SNP is enabled, the pages comprising this buffer need to be set to
firmware-owned in the RMP table before they can be accessed by firmware
for subsequent updates to the initial contents.
Implement that handling here.
[ bp: Carve out allocation into a helper. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-18-michael.roth@amd.com
The behavior and requirement for the SEV-legacy command is altered when
the SNP firmware is in the INIT state. See SEV-SNP firmware ABI
specification for more details.
Allocate the Trusted Memory Region (TMR) as a 2MB-sized/aligned region
when SNP is enabled to satisfy new requirements for SNP. Continue
allocating a 1MB-sized region for !SNP configuration.
[ bp: Carve out TMR allocation into a helper. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-17-michael.roth@amd.com
Export sev_do_cmd() as a generic API for the hypervisor to issue
commands to manage an SEV or an SNP guest. The commands for SEV and SNP
are defined in the SEV and SEV-SNP firmware specifications.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-15-michael.roth@amd.com
Before SNP VMs can be launched, the platform must be appropriately
configured and initialized via the SNP_INIT command.
During the execution of SNP_INIT command, the firmware configures
and enables SNP security policy enforcement in many system components.
Some system components write to regions of memory reserved by early
x86 firmware (e.g. UEFI). Other system components write to regions
provided by the operation system, hypervisor, or x86 firmware.
Such system components can only write to HV-fixed pages or Default
pages. They will error when attempting to write to pages in other page
states after SNP_INIT enables their SNP enforcement.
Starting in SNP firmware v1.52, the SNP_INIT_EX command takes a list of
system physical address ranges to convert into the HV-fixed page states
during the RMP initialization. If INIT_RMP is 1, hypervisors should
provide all system physical address ranges that the hypervisor will
never assign to a guest until the next RMP re-initialization.
For instance, the memory that UEFI reserves should be included in the
range list. This allows system components that occasionally write to
memory (e.g. logging to UEFI reserved regions) to not fail due to
RMP initialization and SNP enablement.
Note that SNP_INIT(_EX) must not be executed while non-SEV guests are
executing, otherwise it is possible that the system could reset or hang.
The psp_init_on_probe module parameter was added for SEV/SEV-ES support
and the init_ex_path module parameter to allow for time for the
necessary file system to be mounted/available.
SNP_INIT(_EX) does not use the file associated with init_ex_path. So, to
avoid running into issues where SNP_INIT(_EX) is called while there are
other running guests, issue it during module probe regardless of the
psp_init_on_probe setting, but maintain the previous deferrable handling
for SEV/SEV-ES initialization.
[ mdr: Squash in psp_init_on_probe changes from Tom, reduce
proliferation of 'probe' function parameter where possible.
bp: Fix 32-bit allmodconfig build. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-14-michael.roth@amd.com
AMD introduced the next generation of SEV called SEV-SNP (Secure Nested
Paging). SEV-SNP builds upon existing SEV and SEV-ES functionality while
adding new hardware security protection.
Define the commands and structures used to communicate with the AMD-SP
when creating and managing the SEV-SNP guests. The SEV-SNP firmware spec
is available at developer.amd.com/sev.
[ mdr: update SNP command list and SNP status struct based on current
spec, use C99 flexible arrays, fix kernel-doc issues. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-13-michael.roth@amd.com
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc_node() function instead of the
argument count * size in the kzalloc_node() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to raw_smp_processor_id() to prevent a number of
warnings from kernel debugging. We do not care about
preemption here, as the CPU number is only used as a
poor mans load balancing or device selection. If preemption
happens during an encrypt/decrypt operation a small performance
hit will occur but everything will continue to work, so just
ignore it. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").
[ 7538.874350] BUG: using smp_processor_id() in preemptible [00000000] code: af_alg06/8438
[ 7538.874368] caller is debug_smp_processor_id+0x1c/0x28
[ 7538.874373] CPU: 50 PID: 8438 Comm: af_alg06 Kdump: loaded Not tainted 5.10.0.pc+ #18
[ 7538.874377] Call trace:
[ 7538.874387] dump_backtrace+0x0/0x210
[ 7538.874389] show_stack+0x2c/0x38
[ 7538.874392] dump_stack+0x110/0x164
[ 7538.874394] check_preemption_disabled+0xf4/0x108
[ 7538.874396] debug_smp_processor_id+0x1c/0x28
[ 7538.874406] sec_create_qps+0x24/0xe8 [hisi_sec2]
[ 7538.874408] sec_ctx_base_init+0x20/0x4d8 [hisi_sec2]
[ 7538.874411] sec_aead_ctx_init+0x68/0x180 [hisi_sec2]
[ 7538.874413] sec_aead_sha256_ctx_init+0x28/0x38 [hisi_sec2]
[ 7538.874421] crypto_aead_init_tfm+0x54/0x68
[ 7538.874423] crypto_create_tfm_node+0x6c/0x110
[ 7538.874424] crypto_alloc_tfm_node+0x74/0x288
[ 7538.874426] crypto_alloc_aead+0x40/0x50
[ 7538.874431] aead_bind+0x50/0xd0
[ 7538.874433] alg_bind+0x94/0x148
[ 7538.874439] __sys_bind+0x98/0x118
[ 7538.874441] __arm64_sys_bind+0x28/0x38
[ 7538.874445] do_el0_svc+0x88/0x258
[ 7538.874447] el0_svc+0x1c/0x28
[ 7538.874449] el0_sync_handler+0x8c/0xb8
[ 7538.874452] el0_sync+0x148/0x180
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Read the values of some device registers before the device
is reset, these values help analyze the cause of the device exception.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Support get device current state. The value 0 indicates that
the device is busy, and the value 1 indicates that the
device is idle. When the device is in suspended, 1 is returned.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the debugfs_create_dir() error checking in
iaa_crypto_debugfs_init(). Because the debugfs_create_dir() is developed
in a way that the caller can safely handle the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header table and related code is currently unused - it was
included and used for canned mode, but canned mode has been removed,
so this code can be safely removed as well.
This indirectly fixes a bug reported by Dan Carpenter.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-crypto/b2e0bd974981291e16882686a2b9b1db3986abe4.camel@linux.intel.com/T/#m4403253d6a4347a925fab4fc1cdb4ef7c095fb86
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The use of array_size() leads gcc to assume the memcpy() can have a larger
limit than actually possible, which triggers a string fortification warning:
In file included from include/linux/string.h:296,
from include/linux/bitmap.h:12,
from include/linux/cpumask.h:12,
from include/linux/sched.h:16,
from include/linux/delay.h:23,
from include/linux/iopoll.h:12,
from drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:3:
In function 'fortify_memcpy_chk',
inlined from 'adf_gen4_init_thd2arb_map' at drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:401:3:
include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
579 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fortify-string.h:588:4: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit range check to avoid this.
Fixes: 5da6a2d535 ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.
drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c
deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl
This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kfree() function was called in up to two cases by the
__virtio_crypto_akcipher_do_req() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
* Adjust jump targets.
* Delete two initialisations which became unnecessary
with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ahash_alg->setkey is updated to ahash_nosetkey in ahash.c
so checking setkey() function to determine hmac algorithm is not valid.
to fix this added is_hmac variable in structure caam_hash_alg to determine
whether the algorithm is hmac or not.
Fixes: 2f1f34c1bf ("crypto: ahash - optimize performance when wrapping shash")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit "crypto: qat - generate dynamically arbiter mappings"
introduced a regression on qat_402xx devices.
This is reported when the driver probes the device, as indicated by
the following error messages:
4xxx 0000:0b:00.0: enabling device (0140 -> 0142)
4xxx 0000:0b:00.0: Generate of the thread to arbiter map failed
4xxx 0000:0b:00.0: Direct firmware load for qat_402xx_mmp.bin failed with error -2
The root cause of this issue was the omission of a necessary function
pointer required by the mapping algorithm during the implementation.
Fix it by adding the missing function pointer.
Fixes: 5da6a2d535 ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In some configurations e.g. systems with CXL, a numa node can have 0
cpus and cpumask_nth() will return a cpu value that doesn't exist,
which will result in an attempt to add an entry to the wq table at a
bad index.
To fix this, when iterating the cpus for a node, skip any node that
doesn't have cpus.
Also, as a precaution, add a warning and bail if cpumask_nth() returns
a nonexistent cpu.
Reported-by: Zhang, Rex <rex.zhang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert sahara driver to use crypto_engine, rather than doing manual queue
management.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not spam the kernel log with unnecessary error messages when processing
requests that aren't a multiple of AES block size.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'active' flag is only used to indirectly set the 'first' flag.
Drop the 'active' flag and set 'first' directly in sahara_sha_init().
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to use dev_err_probe() to simplify the error paths and unify
message template. While at it, also remove explicit error messages
from every potential -ENOMEM.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_enabled() helper to simplify probe/remove code. Also, use
dev_err_probe() for error reporting.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Where applicable, use BIT() macro instead of shift operation to improve
readability. No functional change.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the same indentation style for all macros.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing sahara sha256 speed performance with tcrypt (mode=404) on
imx53-qsrb board, multiple "Invalid numbers of src SG." errors are
reported. This was traced to sahara_walk_and_recalc() resizing req->src
and causing the subsequent dma_map_sg() call to fail.
Now that the previous commit fixed sahara_sha_hw_links_create() to take
into account the actual request size, rather than relying on sg->length
values, the resize operation is no longer necessary.
Therefore, remove sahara_walk_and_recalc() and simplify associated logic.
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's not always the case that the entire sg entry needs to be processed.
Currently, when nbytes is less than sg->length, "Descriptor length" errors
are encountered.
To fix this, take the actual request size into account when populating the
hw links.
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sahara_sha_hw_data_descriptor_create() returns negative error codes on
failure, so make sure the errors are correctly handled / propagated.
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg lists are not unmapped in case of timeout errors. Fix this.
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set the reqsize for sha algorithms to sizeof(struct sahara_sha_reqctx), the
extra space is not needed.
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of a zero-length input, exit gracefully from sahara_aes_crypt().
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The thread-to-arbiter mapping describes which arbiter can assign jobs
to an acceleration engine thread.
The existing mappings are functionally correct, but hardcoded and not
optimized.
Replace the static mappings with an algorithm that generates optimal
mappings, based on the loaded configuration.
The logic has been made common so that it can be shared between all
QAT GEN4 devices.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose through debugfs ring pair telemetry data for QAT GEN4 devices.
This allows to gather metrics about the PCIe channel and device TLB for
a selected ring pair. It is possible to monitor maximum 4 ring pairs at
the time per device.
For details, refer to debugfs-driver-qat_telemetry in Documentation/ABI.
This patch is based on earlier work done by Wojciech Ziemba.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose through debugfs device telemetry data for QAT GEN4 devices.
This allows to gather metrics about the performance and the utilization
of a device. In particular, statistics on (1) the utilization of the
PCIe channel, (2) address translation, when SVA is enabled and (3) the
internal engines for crypto and data compression.
If telemetry is supported by the firmware, the driver allocates a DMA
region and a circular buffer. When telemetry is enabled, through the
`control` attribute in debugfs, the driver sends to the firmware, via
the admin interface, the `TL_START` command. This triggers the device to
periodically gather telemetry data from hardware registers and write it
into the DMA memory region. The device writes into the shared region
every second.
The driver, every 500ms, snapshots the DMA shared region into the
circular buffer. This is then used to compute basic metric
(min/max/average) on each counter, every time the `device_data` attribute
is queried.
Telemetry counters are exposed through debugfs in the folder
/sys/kernel/debug/qat_<device>_<BDF>/telemetry.
For details, refer to debugfs-driver-qat_telemetry in Documentation/ABI.
This patch is based on earlier work done by Wojciech Ziemba.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the admin interface with two new public APIs to enable
and disable the telemetry feature: adf_send_admin_tl_start() and
adf_send_admin_tl_stop().
The first, sends to the firmware, through the ICP_QAT_FW_TL_START
message, the IO address where the firmware will write telemetry
metrics and a list of ring pairs (maximum 4) to be monitored.
It returns the number of accelerators of each type supported by
this hardware. After this message is sent, the firmware starts
periodically reporting telemetry data using by writing into the
dma buffer specified as input.
The second, sends the admin message ICP_QAT_FW_TL_STOP
which stops the reporting of telemetry data.
This patch is based on earlier work done by Wojciech Ziemba.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GET_DEV() macro expansion relies on struct pci_dev being defined.
Include <linux/pci.h> at adf_accel_devices.h.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order for shared workqeues to work properly, desc->priv should be
set to 0 rather than 1. The need for this is described in commit
f5ccf55e10 (dmaengine/idxd: Re-enable kernel workqueue under DMA
API), so we need to make IAA consistent with IOMMU settings, otherwise
we get:
[ 141.948389] IOMMU: dmar15: Page request in Privilege Mode
[ 141.948394] dmar15: Invalid page request: 2000026a100101 ffffb167
Dedicated workqueues ignore this field and are unaffected.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an option in Inline IPsec configure mailbox to configure the
CPT_AF_LFX_CTL:CTX_ILEN for inline CPT LF attached to CPT RVU PF.
This is needed to set the ctx ilen to size of inbound SA for
HW errata IPBUCPT-38756. Not setting this would lead to new context's
not being fetched.
Also set FLR_FLUSH in CPT_LF_CTX_CTL for CPT LF's as workaround
for same errata.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register errors interrupts for inline cptlf attached to PF driver
so that SMMU faults and other errors can be reported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HW has a errata that CPT HW may hit an issue, while processing CPT
instructions with CTX_VAL set and CTX_VAL not set. So, this patch
adds the code to always set the CTX_VAL as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updates CPT inbound inline IPsec configure mailbox to take
CPT credit threshold and bpid, which are introduced
in CN10KB.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT LF must be reset and follow CPT LF disable sequence
suggested by HW team, when driver exits.
This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds code to not execute CPT errata "when CPT_AF_DIAG[FLT_DIS] = 0 and a
CPT engine access to LLC/DRAM encounters a fault/poison, a rare case
may result in unpredictable data being delivered to a CPT engine"
workaround on CN10KA B0/CN10KB HW as it is fixed on these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On CN10KA B0/CN10KB, CPT scatter gather format has modified
to support multi-seg in inline IPsec. Due to this CPT requires
new firmware and doesn't work with CN10KA0/A1 firmware. To make
HW works in backward compatibility mode or works with CN10KA0/A1
firmware, a bit(T106_MODE) is introduced in HW CSR.
This patch adds devlink parameter for configuring T106_MODE.
This patch also documents the devlink parameter under
Documentation/crypto/device_drivers.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Scatter Gather input format for CPT has changed on CN10KB/CN10KA B0 HW
to make it compatible with NIX Scatter Gather format to support SG mode
for inline IPsec. This patch modifies the code to make the driver works
for the same. This patch also enables CPT firmware load for these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT block reset in CPT PF erase all the CPT configuration which is
done in AF driver init. So, remove CPT block reset from CPT PF as
it is also being done in AF init and not required in PF.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
smatch warnings:
drivers/crypto/stm32/stm32-crc32.c:108 stm32_crc_get_next_crc() warn:
can 'crc' even be NULL?
Use list_first_entry_or_null instead of list_first_entry to retrieve
the first device registered.
The function list_first_entry always return a non NULL pointer even if
the list is empty. Hence checking if the pointer returned is NULL does
not tell if the list is empty or not.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for 420xx devices by including a new device driver that
supports such devices, updates to the firmware loader and capabilities.
Compared to 4xxx devices, 420xx devices have more acceleration engines
(16 service engines and 1 admin) and support the wireless cipher
algorithms ZUC and Snow 3G.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Co-developed-by: Dong Xie <dong.xie@intel.com>
Signed-off-by: Dong Xie <dong.xie@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Relocate the structures adf_fw_objs and adf_fw_config from the file
adf_4xxx_hw_data.c to the newly created adf_fw_config.h.
These structures will be used by new device drivers.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move logic that is common between QAT GEN4 accelerators to the
qat_common folder. This includes addresses of CSRs, setters and
configuration logic.
When moved, functions and defines have been renamed from 4XXX to GEN4.
Code specific to the device is moved to the file adf_gen4_hw_data.c.
Code related to configuration is moved to the newly created
adf_gen4_config.c.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add accel_dev as parameter of the function uof_get_num_objs().
This is in preparation for the introduction of the QAT 420xx driver as
it will allow to reconfigure the ae_mask when a configuration that does
not require all AEs is loaded on the device.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the function get_service_enabled() from adf_4xxx_hw_data.c to
adf_cfg_services.c and rename it as adf_get_service_enabled().
This function is not specific to the 4xxx and will be used by
other QAT drivers.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The scheduled tasklet needs to be executed on device remove.
Fixes: fed93fb62e ("crypto: virtio - Handle dataq logic with tasklet")
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes following cleanup issues:
- Missing instruction queue free on cleanup. This
will lead to memory leak.
- lfs->lfs_num is set to zero before cleanup, which
will lead to improper cleanup.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the printf of an error message and optimized the handling
process of ret.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Deleted a dbg function because this function has the risk of
address leakage. In addition, this function is only used for
debugging in the early stage and is not required in the future.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for optional debugfs statistics support for the IAA
Compression Accelerator. This is enabled by the kernel config item:
CRYPTO_DEV_IAA_CRYPTO_STATS
When enabled, the IAA crypto driver will generate statistics which can
be accessed at /sys/kernel/debug/iaa-crypto/.
See Documentation/driver-api/crypto/iax/iax-crypto.rst for details.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing iaa crypto async support provides an implementation that
satisfies the interface but does so in a synchronous manner - it fills
and submits the IDXD descriptor and then waits for it to complete
before returning. This isn't a problem at the moment, since all
existing callers (e.g. zswap) wrap any asynchronous callees in a
synchronous wrapper anyway.
This change makes the iaa crypto async implementation truly
asynchronous: it fills and submits the IDXD descriptor, then returns
immediately with -EINPROGRESS. It also sets the descriptor's 'request
completion irq' bit and sets up a callback with the IDXD driver which
is called when the operation completes and the irq fires. The
existing callers such as zswap use synchronous wrappers to deal with
-EINPROGRESS and so work as expected without any changes.
This mode can be enabled by writing 'async_irq' to the sync_mode
iaa_crypto driver attribute:
echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
Async mode without interrupts (caller must poll) can be enabled by
writing 'async' to it:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
The default sync mode can be enabled by writing 'sync' to it:
echo sync > /sys/bus/dsa/drivers/crypto/sync_mode
The sync_mode value setting at the time the IAA algorithms are
registered is captured in each algorithm's crypto_ctx and used for all
compresses and decompresses when using a given algorithm.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch registers the deflate-iaa deflate compression algorithm and
hooks it up to the IAA hardware using the 'fixed' compression mode
introduced in the previous patch.
Because the IAA hardware has a 4k history-window limitation, only
buffers <= 4k, or that have been compressed using a <= 4k history
window, are technically compliant with the deflate spec, which allows
for a window of up to 32k. Because of this limitation, the IAA fixed
mode deflate algorithm is given its own algorithm name, 'deflate-iaa'.
With this change, the deflate-iaa crypto algorithm is registered and
operational, and compression and decompression operations are fully
enabled following the successful binding of the first IAA workqueue
to the iaa_crypto sub-driver.
when there are no IAA workqueues bound to the driver, the IAA crypto
algorithm can be unregistered by removing the module.
A new iaa_crypto 'verify_compress' driver attribute is also added,
allowing the user to toggle compression verification. If set, each
compress will be internally decompressed and the contents verified,
returning error codes if unsuccessful. This can be toggled with 0/1:
echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress
The default setting is '1' - verify all compresses.
The verify_compress value setting at the time the algorithm is
registered is captured in the algorithm's crypto_ctx and used for all
compresses when using the algorithm.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Define an in-kernel API for adding and removing compression modes,
which can be used by kernel modules or other kernel code that
implements IAA compression modes.
Also add a separate file, iaa_crypto_comp_fixed.c, containing huffman
tables generated for the IAA 'fixed' compression mode. Future
compression modes can be added in a similar fashion.
One or more crypto compression algorithms will be created for each
compression mode, each of which can be selected as the compression
algorithm to be used by a particular facility.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The iaa compression/decompression algorithms in later patches need a
way to retrieve an appropriate IAA workqueue depending on how close
the associated IAA device is to the current cpu.
For this purpose, add a per-cpu array of workqueues such that an
appropriate workqueue can be retrieved by simply accessing the per-cpu
array.
Whenever a new workqueue is bound to or unbound from the iaa_crypto
driver, the available workqueues are 'rebalanced' such that work
submitted from a particular CPU is given to the most appropriate
workqueue available. There currently isn't any way for the user to
tweak the way this is done internally - if necessary, knobs can be
added later for that purpose. Current best practice is to configure
and bind at least one workqueue for each IAA device, but as long as
there is at least one workqueue configured and bound to any IAA device
in the system, the iaa_crypto driver will work, albeit most likely not
as efficiently.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Intel Analytics Accelerator (IAA) is a hardware accelerator that
provides very high thoughput compression/decompression compatible with
the DEFLATE compression standard described in RFC 1951, which is the
compression/decompression algorithm exported by this module.
Users can select IAA compress/decompress acceleration by specifying
one of the deflate-iaa* algorithms as the compression algorithm to use
by whatever facility allows asynchronous compression algorithms to be
selected.
For example, zswap can select the IAA fixed deflate algorithm
'deflate-iaa' via:
# echo deflate-iaa > /sys/module/zswap/parameters/compressor
This patch adds iaa_crypto as an idxd sub-driver and tracks iaa
devices and workqueues as they are probed or removed.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current dev_err_probe will return 0 instead of proper error code if
driver failed to get irq number. Fix the return code.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
NULL check before kfree_sensitive function is not needed.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311301702.LxswfETY-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the zip alg support related capability
register in hisi_zip_qm_init(), which will be called by hisi_zip_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset failed
and the memory space disabled.
Fixes: db700974b6 ("crypto: hisilicon/zip - support zip capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the sec alg support related capability
register in sec_qm_init(), which will be called by probe process.
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: 921715b6b7 ("crypto: hisilicon/sec - get algorithm bitmap from registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of hpre alg support related capability
register in hpre_qm_init(), which will be called by hpre_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: f214d59a06 ("crypto: hisilicon/hpre - support hpre capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:
| Call trace:
| pci_irq_vector+0xfc/0x140
| hisi_qm_uninit+0x278/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| device_release_driver+0x3c/0x60
| pci_stop_bus_device+0xfc/0x22c
| pci_stop_and_remove_bus_device+0x38/0x70
| pci_iov_remove_virtfn+0x108/0x1c0
| sriov_disable+0x7c/0x1e4
| pci_disable_sriov+0x4c/0x6c
| hisi_qm_sriov_disable+0x90/0x160 [hisi_qm]
| hpre_remove+0x1a8/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| driver_detach+0x168/0x2d0
| bus_remove_driver+0xc0/0x230
| driver_unregister+0x58/0xdc
| pci_unregister_driver+0x40/0x220
| hpre_exit+0x34/0x64 [hisi_hpre]
| __arm64_sys_delete_module+0x374/0x620
[...]
| Call trace:
| free_msi_irqs+0x25c/0x300
| pci_disable_msi+0x19c/0x264
| pci_free_irq_vectors+0x4c/0x70
| hisi_qm_pci_uninit+0x44/0x90 [hisi_qm]
| hisi_qm_uninit+0x28c/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
[...]
The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().
So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.
Fixes: 3536cc55ca ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extract a public function to set qm algs and remove
the similar code for setting qm algs in each module.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Factor out duplicated skcipher fallback handling code to a helper function
sahara_aes_fallback(). Also, keep a single check if fallback is required in
sahara_aes_crypt().
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "error" field in sahara_dev struct hasn't been needed/used since commit
c0c3c89ae3 ("crypto: sahara - replace tasklets with kthread"), so remove
the remaining references.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not call dma_unmap_sg() for scatterlists that were not mapped
successfully.
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's not always the case that the entire sg entry needs to be processed.
Currently, when cryptlen is less than sg->legth, "Descriptor length" errors
are encountered.
The error was noticed when testing xts(sahara-ecb-aes) with arbitrary sized
input data. To fix this, take the actual request size into account when
populating the hw links.
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
update() calls should not modify the result buffer, so add an additional
check for "rctx->last" to make sure that only the final hash value is
copied into the buffer.
Fixes the following selftest failure:
alg: ahash: sahara-sha256 update() used result buffer on test vector 3,
cfg="init+update+final aligned buffer"
Fixes: 5a2bb93f59 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kernel crypto API requires that all CBC implementations update the IV
buffer to contain the last ciphertext block.
This fixes the following cbc selftest error:
alg: skcipher: sahara-cbc-aes encryption test failed (wrong output IV) on
test vector 0, cfg="in-place (one sglist)"
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the FLAGS_NEW_KEY logic as it has the following issues:
- the wrong key may end up being used when there are multiple data streams:
t1 t2
setkey()
encrypt()
setkey()
encrypt()
encrypt() <--- key from t2 is used
- switching between encryption and decryption with the same key is not
possible, as the hdr flags are only updated when a new setkey() is
performed
With this change, the key is always sent along with the cryptdata when
performing encryption/decryption operations.
Fixes: 5de8875281 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Macro dma_map_sg() may return 0 on error. This patch enables
checks in case of the macro failure and ensures unmapping of
previously mapped buffers with dma_unmap_sg().
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 49186a7d9e ("crypto: inside_secure - Avoid dma map if size is zero")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are limited number CPT LFs (example 64 LFs on cn10k) and
these LFs are allocated/attached to CPT VF on its creation.
cptpf sysfs parameter "kvf_limits" defines number of CPT LFs
per CPT VF. Default "kvf_limits" is initialized to zero and if
kvf_limits is zero then number of LF allocated are equal to
online cpus in system.
For example on 24 core system, 24 CPT LFs will be attached per VF.
That means no CPT LF available when creating more than 2 CPT VFs
on system which have total 64 LFs. Although VFs gets created but
no LF attached to it.
There seems no reason to default allocate as many LFs as many
online cpus in system. This patch initializes "kvf_limits" to
one to limit one LF allocated per CPT VF. "kvf_limits" can
be changed in range of 1 to number-of-online-cpus via sysfs.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a possibility that the function adf_devmgr_pci_to_accel_dev()
might return a NULL pointer.
Add a NULL pointer check in the function rp2srv_show().
Fixes: dbc8876dd8 ("crypto: qat - add rp2svc sysfs attribute")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: David Guckian <david.guckian@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the function validate_user_input() returns an error, the error path
attempts to unlock an unacquired mutex.
Acquire the mutex before calling validate_user_input(). This is not
strictly necessary but simplifies the code.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The input argument `sla_in` is a pointer to a structure that contains
the parameters of the SLA which is being added or updated.
If this pointer is NULL, the function should return an error as
the data required for the algorithm is not available.
By mistake, the logic jumps to the error path which dereferences
the pointer.
This results in a warnings reported by the static analyzer Smatch when
executed without a database:
drivers/crypto/intel/qat/qat_common/adf_rl.c:871 add_update_sla()
error: we previously assumed 'sla_in' could be null (see line 812)
This issue was not found in internal testing as the pointer cannot be
NULL. The function add_update_sla() is only called (indirectly) by
the rate limiting sysfs interface implementation in adf_sysfs_rl.c
which ensures that the data structure is allocated and valid. This is
also proven by the fact that Smatch executed with a database does not
report such error.
Fix it by returning with error if the pointer `sla_in` is NULL.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When dma_map_single() fails, wa->address is supposed to be freed
by the callers of ccp_init_dm_workarea() through ccp_dm_free().
However, many of the call spots don't expect to have to call
ccp_dm_free() on failure of ccp_init_dm_workarea(), which may
lead to a memleak. Let's free wa->address in ccp_init_dm_workarea()
when dma_map_single() fails.
Fixes: 63b945091a ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return crypto_aead_setkey() in order to transfer the error if
it fails.
Fixes: d2c8ac187f ("crypto: sa2ul - Add AEAD algorithm support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Remove redundant array element, prevent the size obtained by
ARRAY_SIZE() from qm_log_hw_error is greater than actual size.
2. Add comments in function qm_set_vf_mse() and qm_cq_ctx_cfg()
to make it easier to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'QM_INIT' and 'QM_CLOSE' status of qm and 'QP_INIT'
and 'QP_CLOSE' status of queue are not actually used. Currently,
driver only needs to switch status when the device or queue
is enabled or stopped, Therefore, remove unneeded status to
simplify driver. In addition, rename'QM_START to'QM_WORK' for
ease to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Remove unnecessary brackets in function hisi_acc_create_sgl_pool().
2. Modify local variable type, ensure that the variable type is
consistent with the variable type to be compared.
3. Because the function clear_hw_sgl_sge() is in the task process,
obtain the value of le16_to_cpu(hw_sgl->entry_sum_in_sgl) before
loop execting to shorten the loop execution time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To meet specific application scenarios, the function of switching between
the high performance mode and the high compression mode is added.
Use the perf_mode=0/1 configuration to set the compression high perf mode,
0(default, high compression mode), 1(high performance mode). These two
modes only apply to the compression direction and are compatible with
software algorithm in both directions.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qat_rl sysfs attribute group is registered within the adf_dev_start()
function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_rl attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_rl' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x2d/0x50
adf_sysfs_rl_rm+0x44/0x70 [intel_qat]
adf_rl_stop+0x2d/0xb0 [intel_qat]
adf_dev_stop+0x33/0x1d0 [intel_qat]
adf_dev_down+0xf1/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
Fixes: d9fb840837 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qat_ras sysfs attribute group is registered within the
adf_dev_start() function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_ras attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_ras' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x29/0x50
adf_sysfs_stop_ras+0x4b/0x80 [intel_qat]
adf_dev_stop+0x43/0x1d0 [intel_qat]
adf_dev_down+0x4b/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
Fixes: 532d7f6bc4 ("crypto: qat - add error counters")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Doing ipsec produces a spinlock recursion warning.
This is due to crypto_finalize_request() being called in the upper half.
Move virtual data queue processing of virtio-crypto driver to tasklet.
Fixes: dbaf0624ff ("crypto: add virtio-crypto driver")
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Aad requires padding with zeroes up to 15 bytes in some cases. This
patch increases the allocated buffer size for aad and prevents the
driver accessing uninitialized memory region.
v1->v2: Specify reason for alloc size change in descriptions.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware could not clear irq status without resetting the entire module.
Driver receives irq immediately when mask bit is cleared causing
intermittent errors in RSA calculations. Switch to use csr polling for
done status instead.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change AMBA_PL08X to required dependency as the hash ops depends on it
for data transfer.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes list_add corruption error when the driver is returned
with -EPROBE_DEFER. It is also required to roll back the previous
probe sequences in case of deferred_probe. So, this removes
'err_probe_defer" goto label and just use err_dma_init instead.
Fixes: 42ef0e944b ("crypto: starfive - Add crypto engine support")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "ring" variable has an upper bounds check but nothing checks for
negatives. This code uses kstrtouint() already and it was obviously
intended to be declared as unsigned int. Make it so.
Fixes: dbc8876dd8 ("crypto: qat - add rp2svc sysfs attribute")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify sun8i_ss_hashkey() by using crypto_shash_tfm_digest() instead
of an alloc+init+update+final sequence. This should also improve
performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'offset' type is unsigned long in 'struct debugfs_reg32',
so type of values casts to unsigned long long is incorrect, and the
values do not require type cast, remove them.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When device is abnormal and reports abnormal interrupt event to driver,
the driver can print device information for error analysis. This patch
adds some device error-related information output after the device reports
an abnormal interrupt.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc.
Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc. The warnings are false positives
because nengines is at most 2.
Make the buffer bigger and change the snprintf to use unsigned
integers to eliminate these warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc. The warning triggered by the strings
here are clearly false positives (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95755).
Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function pointer crypto_ahash::init is an internal implementation
detail of the ahash API that exists to help it support both ahash and
shash algorithms. With an upcoming refactoring of how the ahash API
supports shash algorithms, this field will be removed.
Some drivers are invoking crypto_ahash::init to call into their own
code, which is unnecessary and inefficient. The talitos driver is one
of those drivers. Make it just call its own code directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function pointer crypto_ahash::init is an internal implementation
detail of the ahash API that exists to help it support both ahash and
shash algorithms. With an upcoming refactoring of how the ahash API
supports shash algorithms, this field will be removed.
Some drivers are invoking crypto_ahash::init to call into their own
code, which is unnecessary and inefficient. The chelsio driver is one
of those drivers. Make it just call its own code directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the stm32 driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in stm32_hash_finish(),
simply using memcpy(). And stm32_hash_setkey() does not assume any
alignment for the key buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the starfive driver no longer use it. This driver did actually
rely on it, but only for storing to the result buffer using int stores
in starfive_hash_copy_hash(). This patch makes
starfive_hash_copy_hash() use put_unaligned() instead. (It really
should use a specific endianness, but that's an existing bug.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the rockchip driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in rk_hash_run(),
already using put_unaligned_le32(). And this driver only supports
unkeyed hash algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the omap-sham driver no longer use it. This driver did actually
rely on it, but only for storing to the result buffer using __u32 stores
in omap_sham_copy_ready_hash(). This patch makes
omap_sham_copy_ready_hash() use put_unaligned() instead. (It really
should use a specific endianness, but that's an existing bug.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the talitos driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in
common_nonsnoop_hash_unmap(), simply using memcpy(). And this driver's
"ahash_setkey()" function does not assume any alignment for the key
buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the s5p-sss driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in
s5p_hash_copy_result(), simply using memcpy(). And this driver only
supports unkeyed hash algorithms, so the key buffer need not be
considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the mxs-dcp driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in dcp_sha_req_to_buf(),
using a bytewise copy. And this driver only supports unkeyed hash
algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the artpec6 driver no longer use it. This driver is unusual in
that it DMAs the digest directly to the result buffer. This is broken
because the crypto API provides the result buffer as an arbitrary
virtual address, which might not be valid for DMA, even after the crypto
API applies the alignmask. Maybe the alignmask (which this driver set
only to 3) made this code work in a few more cases than it otherwise
would have. But even if so, it doesn't make sense for this single
driver that is broken anyway to block removal of the alignmask support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the atmel driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in
atmel_sha_copy_ready_hash(), simply using memcpy(). And this driver
didn't set an alignmask for any keyed hash algorithms, so the key buffer
need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the sun8i-ss driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in sun8i_ss_hash_run(),
simply using memcpy(). And sun8i_ss_hmac_setkey() does not assume any
alignment for the key buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the sun8i-ce driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in sun8i_ce_hash_run(),
simply using memcpy(). And this driver only supports unkeyed hash
algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API's support for alignmasks for ahash algorithms is nearly
useless, as its only effect is to cause the API to align the key and
result buffers. The drivers that happen to be specifying an alignmask
for ahash rarely actually need it. When they do, it's easily fixable,
especially considering that these buffers cannot be used for DMA.
In preparation for removing alignmask support from ahash, this patch
makes the sun4i-ss driver no longer use it. This driver didn't actually
rely on it; it only writes to the result buffer in sun4i_hash(), already
using the unaligned access helpers. And this driver only supports
unkeyed hash algorithms, so the key buffer need not be considered.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a request has the flag CRYPTO_TFM_REQ_MAY_BACKLOG set, the function
qat_alg_send_message_maybacklog(), enqueues it in a backlog list if
either (1) there is already at least one request in the backlog list, or
(2) the HW ring is nearly full or (3) the enqueue to the HW ring fails.
If an interrupt occurs right before the lock in qat_alg_backlog_req() is
taken and the backlog queue is being emptied, then there is no request
in the HW queues that can trigger a subsequent interrupt that can clear
the backlog queue. In addition subsequent requests are enqueued to the
backlog list and not sent to the hardware.
Fix it by holding the lock while taking the decision if the request
needs to be included in the backlog queue or not. This synchronizes the
flow with the interrupt handler that drains the backlog queue.
For performance reasons, the logic has been changed to try to enqueue
first without holding the lock.
Fixes: 3868238397 ("crypto: qat - add backlog mechanism")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/af9581e2-58f9-cc19-428f-6f18f1f83d54@redhat.com/T/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The file adf_cfg_services.h cannot be included in header files since it
instantiates the structure adf_cfg_services. Move that structure to its
own file and export the symbol.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `num_rps` to the `qat` attribute group. This returns
the number of ring pairs that a single device has. This allows to know
the maximum value that can be set to the attribute `rp2svc`.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the attribute `rp2svc` to the `qat` attribute group. This provides a
way for a user to query a specific ring pair for the type of service
that is currently configured for.
When read, the service will be returned for the defined ring pair.
When written to this value will be stored as the ring pair to return
the service of.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an interface for the rate limiting feature which allows to add,
remove and modify a QAT SLA (Service Level Agreement).
This adds a new sysfs attribute group, `qat_rl`, which can be accessed
from /sys/bus/pci/devices/<BUS:DEV:FUNCTION> with the following
hierarchy:
|-+ qat_rl
|---- id (RW) # SLA identifier
|---- cir (RW) # Committed Information Rate
|---- pir (RW) # Peak Information Rate
|---- srv (RW) # Service to be rate limited
|---- rp (RW) (HEX) # Ring pairs to be rate limited
|---- cap_rem (RW) # Remaining capability for a service
|---- sla_op (WO) # Allows to perform an operation on an SLA
The API works by setting the appropriate RW attributes and then
issuing a command through the `sla_op`. For example, to create an SLA, a
user needs to input the necessary data into the attributes cir, pir, srv
and rp and then write into `sla_op` the command `add` to execute the
operation.
The API also provides `cap_rem` attribute to get information about
the remaining device capability within a certain service which is
required when setting an SLA.
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Rate Limiting (RL) feature allows to control the rate of requests
that can be submitted on a ring pair (RP). This allows sharing a QAT
device among multiple users while ensuring a guaranteed throughput.
The driver provides a mechanism that allows users to set policies, that
are programmed to the device. The device is then enforcing those policies.
Configuration of RL is accomplished through entities called SLAs
(Service Level Agreement). Each SLA object gets a unique identifier
and defines the limitations for a single service across up to four
ring pairs (RPs count allocated to a single VF).
The rate is determined using two fields:
* CIR (Committed Information Rate), i.e., the guaranteed rate.
* PIR (Peak Information Rate), i.e., the maximum rate achievable
when the device has available resources.
The rate values are expressed in permille scale i.e. 0-1000.
Ring pair selection is achieved by providing a 64-bit mask, where
each bit corresponds to one of the ring pairs.
This adds an interface and logic that allow to add, update, retrieve
and remove an SLA.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT firmware provides a mechanism to retrieve its capabilities
through the init admin interface.
Add logic to retrieve the firmware capability mask from the firmware
through the init/admin channel. This mask reports if the
power management, telemetry and rate limiting features are supported.
The fw capabilities are stored in the accel_dev structure and are used
to detect if a certain feature is supported by the firmware loaded
in the device.
This is supported only by devices which have an admin AE.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some enums use the macro BIT. Include bits.h as it is missing.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The admin API is growing and deserves its own include.
Move it from adf_common_drv.h to adf_admin.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 4xxx drivers hardcode the ring to service mapping. However, when
additional configurations where added to the driver, the mappings were
not updated. This implies that an incorrect mapping might be reported
through pfvf for certain configurations.
Add an algorithm that computes the correct ring to service mapping based
on the firmware loaded on the device.
Fixes: 0cec19c761 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The adf_fw_config structures hardcode a bit mask that represents the
acceleration engines (AEs) where a certain firmware image will have to
be loaded to. Remove the hardcoded masks and replace them with defines.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The logic that selects the correct adf_fw_config structure based on the
configured service is replicated twice in the uof_get_name() and
uof_get_ae_mask() functions. Refactor the code so that there is no
replication.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to count correctable, non fatal and fatal error for QAT GEN4
devices.
These counters are reported through sysfs attributes in the group
qat_ras.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce ras counters interface for counting QAT specific device
errors and expose them through the newly created qat_ras sysfs
group attribute.
This adds the following attributes:
- errors_correctable: number of correctable errors
- errors_nonfatal: number of uncorrectable non fatal errors
- errors_fatal: number of uncorrectable fatal errors
- reset_error_counters: resets all counters
These counters are initialized during device bring up and cleared
during device shutdown and are applicable only to QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect, report and handle uncorrectable errors reported
through the ERRSOU3 register in QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the function adf_get_aram_base() which allows to return the
base address of the aram bar.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect, report and handle correctable and uncorrectable
errors related to the compression hardware.
These are detected through the EXPRPSSMXLT, EXPRPSSMCPR and EXPRPSSMDCPR
registers.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect, report and handle uncorrectable errors reported
through the ERRSOU2 register in QAT GEN4 devices.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect and report uncorrectable errors reported through
the ERRSOU1 register in QAT GEN4 devices.
This also introduces the adf_dev_err_mask structure as part of
adf_hw_device_data which will allow to provide different error masks
per device generation.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect and report correctable errors in QAT GEN4
devices.
This includes (1) enabling, disabling and handling error reported
through the ERRSOU0 register and (2) logic to log the errors
in the system log.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add infrastructure for enabling, disabling and reporting errors in the QAT
driver. This adds a new structure, adf_ras_ops, to adf_hw_device_data that
contains the following methods:
- enable_ras_errors(): allows to enable RAS errors at device
initialization.
- disable_ras_errors(): allows to disable RAS errors at device shutdown.
- handle_interrupt(): allows to detect if there is an error and report if
a reset is required. This is executed immediately after the error is
reported, in the context of an ISR.
An initial, empty, implementation of the methods above is provided
for QAT GEN4.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.
The error logs:
watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407]
[ 1461.978428][ C23] Call trace:
[ 1461.981890][ C23] complete+0x8c/0xf0
[ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt]
[ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2]
[ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2]
[ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm]
[ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm]
[ 1462.015101][ C23] process_one_work+0x1c4/0x470
[ 1462.020052][ C23] worker_thread+0x150/0x3c4
[ 1462.024735][ C23] kthread+0x108/0x13c
[ 1462.028889][ C23] ret_from_fork+0x10/0x18
Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The driver adapted here suffered from this wrong assumption and had
several error paths resulting in resource leaks.
The check for cryp being non-NULL is harmless. This can never happen as
.remove() is only called after .probe() completed successfully and in
that case drvdata was set to a non-NULL value. So this check can just be
dropped.
If pm_runtime_get() fails, the other resources held by the device must
still be freed. Only clk_disable_unprepare() should be skipped as the
pm_runtime_get() failed to call clk_prepare_enable().
After these changes the remove function returns zero unconditionally and
can trivially be converted to the prototype required for .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The driver adapted here suffered from this wrong assumption and had an
error paths resulting in resource leaks.
If pm_runtime_get() fails, the other resources held by the device must
still be freed. Only clk_disable() should be skipped as the
pm_runtime_get() failed to call clk_enable().
After this change the remove function returns zero unconditionally and
can trivially be converted to the prototype required for .remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The driver adapted here suffers from this wrong assumption. Returning
-EBUSY if there are still users results in resource leaks and probably a
crash. Also further down passing the error code of caam_jr_shutdown() to
the caller only results in another error message and has no further
consequences compared to returning zero.
Still convert the driver to return no value in the remove callback. This
also allows to drop caam_jr_platform_shutdown() as the only function
called by it now has the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zynqmp-sha3-384 algorithm sets a nonzero alignmask, but it doesn't
appear to actually need it. Therefore, stop setting it. This will
allow this algorithm to keep being registered after alignmask support is
removed from shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The stm32 crc32 algorithms set a nonzero alignmask, but they don't seem
to actually need it. Their ->update function already has code that
handles aligning the data to the same alignment that the alignmask
specifies, their ->setkey function already uses get_unaligned_le32(),
and their ->final function already uses put_unaligned_le32().
Therefore, stop setting the alignmask. This will allow these algorithms
to keep being registered after alignmask support is removed from shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During hisilicon accelerator live migration operation. In order to
prevent the problem of EQ/AEQ interrupt loss. Migration driver will
trigger an EQ/AEQ doorbell at the end of the migration.
This operation may cause double interruption of EQ/AEQ events.
To ensure that the EQ/AEQ interrupt processing function is normal.
The interrupt handling functionality of EQ/AEQ needs to be updated.
Used to handle repeated interrupts event.
Fixes: b0eed08590 ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc. The warning triggered by the strings
here are clearly false positives (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95755).
Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PSP firmware may report additional error information in the SEV command
buffer registers in situations where an error occurs as the result of an
SEV command. In this case, check if the command buffer registers have been
modified and if so, dump the contents.
Signed-off-by: John Allen <john.allen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to free the reset_data structure if the recovery is
unsuccessful and the reset is synchronous. The function
adf_dev_aer_schedule_reset() handles the cleanup properly. Only
asynchronous resets require such structure to be freed inside the reset
worker.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.
Handle config changed by work queue instead.
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the temporarily applied memory is used to set or get the xqc
information, the driver releases the memory immediately after the
hardware mailbox operation time exceeds the driver waiting time.
However, the hardware does not cancel the operation, so the hardware
may write data to released memory.
Therefore, when the driver is bound to a device, the driver reserves
memory for the xqc configuration. The subsequent xqc configuration
uses the reserved memory to prevent hardware from accessing the
released memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Compress and Verify (CnV) feature check and ensures data integrity
in the compression operation. The implementation of CnV keeps a record
of the CnV errors that have occurred since the driver was loaded.
Expose CnV error stats by providing the "cnv_errors" file under
debugfs. This includes the number of errors detected up to now and
the type of the last error. The error count is provided on a per
Acceleration Engine basis and it is reset every time the driver is loaded.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT devices implement a mechanism that allows them to go autonomously
to a low power state depending on the load.
Expose power management info by providing the "pm_status" file under
debugfs. This includes PM state, PM event log, PM event counters, PM HW
CSRs, per-resource type constrain counters and per-domain power gating
status specific to the QAT device.
This information is retrieved from (1) the FW by means of
ICP_QAT_FW_PM_INFO command, (2) CSRs and (3) counters collected by the
device driver.
In addition, add logic to keep track and report power management event
interrupts and acks/nacks sent to FW to allow/prevent state transitions.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
