Currently, the RCU Tasks Trace grace-period kthread IPIs each online CPU
using smp_call_function_single() in order to track any tasks currently in
RCU Tasks Trace read-side critical sections during which the corresponding
task has neither blocked nor been preempted. These IPIs are annoying
and are also not strictly necessary because any task that blocks or is
preempted within its current RCU Tasks Trace read-side critical section
will be tracked on one of the per-CPU rcu_tasks_percpu structure's
->rtp_blkd_tasks list. So the only time that this is a problem is if
one of the CPUs runs through a long-duration RCU Tasks Trace read-side
critical section without a context switch.
Note that the task_call_func() function cannot help here because there is
no safe way to identify the target task. Of course, the task_call_func()
function will be very useful later, when processing the list of tasks,
but it needs to know the task.
This commit therefore creates a cpu_curr_snapshot() function that returns
a pointer the task_struct structure of some task that happened to be
running on the specified CPU more or less during the time that the
cpu_curr_snapshot() function was executing. If there was no context
switch during this time, this function will return a pointer to the
task_struct structure of the task that was running throughout. If there
was a context switch, then the outgoing task will be taken care of by
RCU's context-switch hook, and the incoming task was either already taken
care during some previous context switch, or it is not currently within an
RCU Tasks Trace read-side critical section. And in this latter case, the
grace period already started, so there is no need to wait on this task.
This new cpu_curr_snapshot() function is invoked on each CPU early in
the RCU Tasks Trace grace-period processing, and the resulting tasks
are queued for later quiescent-state inspection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit maintains a new n_trc_holdouts counter that tracks the number
of tasks blocking the RCU Tasks grace period. This counter is useful
for debugging, and its value has been added to a diagostic message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit takes off the training wheels and relies only on scanning
currently running tasks and tasks that have blocked or been preempted
within their current RCU Tasks Trace read-side critical section.
Before this commit, the time complexity of an RCU Tasks Trace grace
period is O(T), where T is the number of tasks. After this commit,
this time complexity is O(C+B), where C is the number of CPUs and B
is the number of tasks that have blocked (or been preempted) at least
once during their current RCU Tasks Trace read-side critical sections.
Of course, if all tasks have blocked (or been preempted) at least once
during their current RCU Tasks Trace read-side critical sections, this is
still O(T), but current expectations are that RCU Tasks Trace read-side
critical section will be short and that there will normally not be large
numbers of tasks blocked within such a critical section.
Dave Marchevsky kindly measured the effects of this commit on the RCU
Tasks Trace grace-period latency and the rcu_tasks_trace_kthread task's
CPU consumption per RCU Tasks Trace grace period over the course of a
fixed test, all in milliseconds:
Before After
GP latency 22.3 ms stddev > 0.1 17.0 ms stddev < 0.1
GP CPU 2.3 ms stddev 0.3 1.1 ms stddev 0.2
This was on a system with 15,000 tasks, so it is reasonable to expect
much larger savings on the systems on which this issue was first noted,
given that they sport well in excess of 100,000 tasks. CPU consumption
was measured using profiling techniques.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Tested-by: Dave Marchevsky <davemarchevsky@fb.com>
This commit updates the rcutorture.fwd_progress help text to say that
it is the number of forward-progress kthreads to spawn rather than the
old enable/disable functionality. While in the area, make the list of
torture-test parameters easier to read by taking advantage of 100 columns.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
This commit applies the "noinstr" tag to the rcu_idle_enter() and
rcu_idle_exit() functions, which are invoked from portions of the idle
loop that cannot be instrumented. These tags require reworking the
rcu_eqs_enter() and rcu_eqs_exit() functions that these two functions
invoke in order to cause them to use normal assertions rather than
lockdep. In addition, within rcu_idle_exit(), the raw versions of
local_irq_save() and local_irq_restore() are used, again to avoid issues
with lockdep in uninstrumented code.
This patch is based in part on an earlier patch by Jiri Olsa, discussions
with Peter Zijlstra and Frederic Weisbecker, earlier changes by Thomas
Gleixner, and off-list discussions with Yonghong Song.
Link: https://lore.kernel.org/lkml/20220515203653.4039075-1-jolsa@kernel.org/
Reported-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Yonghong Song <yhs@fb.com>
If the rcutree.use_softirq kernel boot parameter is disabled, then it is
possible that a RCU CPU stall is due to the rcuc kthreads being starved of
CPU time. There is currently no easy way to infer this from the RCU CPU
stall warning output. This commit therefore adds a string of the form "
rcuc=%ld jiffies(starved)" to a given CPU's output if the corresponding
rcuc kthread has been starved for more than two seconds.
[ paulmck: Eliminate extraneous space characters. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that RCU scans both running tasks and tasks that have blocked within
their current RCU Tasks Trace read-side critical section, there is no
need for it to scan the idle tasks. After all, an idle loop should not
be remain within an RCU Tasks Trace read-side critical section across
exit from idle, and from a BPF viewpoint, functions invoked from the
idle loop should not sleep. So only running idle tasks can be within
RCU Tasks Trace read-side critical sections.
This commit therefore removes the scan of the idle tasks from the
rcu_tasks_trace_postscan() function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit scans each CPU's ->rtp_blkd_tasks list, adding them to
the list of holdout tasks. This will cause the current RCU Tasks Trace
grace period to wait until these tasks exit their RCU Tasks Trace
read-side critical sections. This commit will enable later work
omitting the scan of the full task list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
A running task might be within an RCU Tasks Trace read-side critical
section for any length of time, but will not be placed on any of the
per-CPU rcu_tasks_percpu structure's ->rtp_blkd_tasks lists. Therefore
any RCU Tasks Trace grace-period processing that does not scan the full
task list must interact with the running tasks.
This commit therefore causes the rcu_tasks_trace_pregp_step() function
to IPI each CPU in order to place the corresponding task on the holdouts
list and to record whether or not it was in an RCU Tasks Trace read-side
critical section. Yes, it is possible to avoid adding it to that list
if it is not a reader, but that would prevent the system from remembering
that this task was in a quiescent state. Which is why the running tasks
are unconditionally added to the holdout list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds checks within rcu_tasks_trace_pertask() to avoid
duplicate (and destructive) additions to the holdouts list. These checks
will be required later due to the possibility of a given task having
blocked while in an RCU Tasks Trace read-side critical section, but now
running on a CPU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This is a code-motion-only commit that moves rcu_tasks_trace_pertask()
to precede rcu_tasks_trace_pregp_step(), so that the latter will be
able to invoke the other without forward references.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds a "B" indicator to the RCU Tasks Trace CPU stall warning
when the task has blocked within its current read-side critical section.
This serves as a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes rcu_read_unlock_trace() to check for the current
task being on a per-CPU list within the rcu_tasks_percpu structure,
and removes it from that list if so. This has the effect of curtailing
tracking of a task that blocked within an RCU Tasks Trace read-side
critical section once it exits that critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit places any task that has ever blocked within its current
RCU Tasks Trace read-side critical section on a per-CPU list within the
rcu_tasks_percpu structure. Tasks are removed from this list when they
exit by the exit_tasks_rcu_finish_trace() function. The purpose of this
commit is to provide the information needed to eliminate the current
scan of the full task list.
This commit offsets the INT_MIN value for ->trc_reader_nesting with the
new nesting level in order to avoid queueing tasks that are exiting
their read-side critical sections.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from syzbot+9bb26e7c5e8e4fa7e641@syzkaller.appspotmail.com ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: syzbot <syzbot+9bb26e7c5e8e4fa7e641@syzkaller.appspotmail.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds fields to task_struct and to rcu_tasks_percpu that will
be used to avoid the task-list scan for RCU Tasks Trace grace periods,
and also initializes these fields.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
When a CPU is offline, its idle task can appear to be running, but it
cannot be doing anything while CPU-hotplug operations are excluded.
This commit takes advantage of that fact by making trc_check_slow_task()
check for task_curr(t) && cpu_online(task_cpu(t)), and recording
full information in that case.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, the RCU Tasks Trace CPU stall warning simply indicates
whether or not the .b.need_qs field is zero. This commit shows the
three permitted values and flags other values with either "!" or "?".
This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit tags offline CPUs with "(offline)" in RCU Tasks Trace CPU
stall warnings. This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds a "I" indicator to the RCU Tasks Trace CPU stall
warning when an IPI directed to a task has thus far failed to arrive.
This serves as a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, trc_inspect_reader() does one check for nesting less than
or equal to zero, then sorts out the distinctions within this single
"if" statement. This commit simplifies the logic by providing one
"if" statement for quiescent states (nesting of zero) and another "if"
statement for transitioning from one nesting level to another or the
outermost rcu_read_unlock_trace() (negative nesting).
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit makes rcu_note_context_switch() unconditionally invoke the
rcu_tasks_qs() function, as opposed to doing so only when RCU (as opposed
to RCU Tasks Trace) urgently needs a grace period to end.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Because the task driving the grace-period kthread is in quiescent state
throughout, this commit excludes it from the list of tasks from which
a quiescent state is needed.
This does mean that attaching a sleepable BPF program to function in
kernel/rcu/tasks.h is a bad idea, by the way.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit identifies idle tasks for recently offlined CPUs as residing
in a quiescent state. This is safe only because CPU-hotplug operations
are excluded during these checks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Any idle task corresponding to an offline CPU is in an RCU Tasks Trace
quiescent state. This commit causes rcu_tasks_trace_postscan() to ignore
idle tasks for offline CPUs, which it can do safely due to CPU-hotplug
operations being disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit replaces the pair of READ_ONCE(t->trc_reader_nesting) calls
with a single such call and a local variable. This makes the code's
intent more clear.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Now that tasks are not removed from the list until they have responded to
any needed request for a quiescent state, it is no longer necessary to
wait for the trc_n_readers_need_end counter to go to zero. This commit
therefore removes that waiting code.
It is therefore also no longer necessary for rcu_tasks_trace_postgp() to
do the final decrement of this counter, so that code is also removed.
This in turn means that trc_n_readers_need_end counter itself can
be removed, as can the rcu_tasks_trace_iw irq_work structure and the
rcu_read_unlock_iw() function.
[ paulmck: Apply feedback from Zqiang. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit gets rid of the task_struct structure's ->trc_reader_checked
field, making it instead be a bit within the task_struct structure's
existing ->trc_reader_special.b.need_qs field. This commit also
atomically loads, stores, and checks the resulting combination of the
reader-checked and need-quiescent state flags. This will in turn allow
significant simplification of the rcu_tasks_trace_postgp() function
as well as elimination of the trc_n_readers_need_end counter in later
commits. These changes will in turn simplify later elimination of the
RCU Tasks Trace scan of the task list, which will make RCU Tasks Trace
grace periods less CPU-intensive.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes synchronous grace periods to be driven from the task
invoking synchronize_rcu_*(), allowing these functions to be invoked from
the mid-boot dead zone extending from when the scheduler was initialized
to to point that the various RCU tasks grace-period kthreads are spawned.
This change will allow the self-tests to run in a consistent manner.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is strictly a code-motion commit that moves the
synchronize_rcu_tasks_generic() down to where it can invoke
rcu_tasks_one_gp() without the need for a forward declaration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts most of the rcu_tasks_kthread() function's loop
body into a new rcu_tasks_one_gp() function. It also introduces
a new ->tasks_gp_mutex to synchronize concurrent calls to this new
rcu_tasks_one_gp() function. This commit is preparation for allowing
RCU tasks grace periods to be driven by the calling task during the
mid-boot dead zone.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a debugging scan for callbacks that got lost during a
callback-queueing transition.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is currently up to the caller to handle stale return values from
get_state_synchronize_rcu(). If poll_state_synchronize_rcu() returned
true once, a grace period has elapsed, regardless of the fact that counter
wrap might cause some future poll_state_synchronize_rcu() invocation to
return false. For example, the caller might store a separate flag that
indicates whether some previous call to poll_state_synchronize_rcu()
determined that the relevant grace period had already ended.
This approach works, but it requires extra storage and is easy to get
wrong. This commit therefore introduces a get_completed_synchronize_rcu()
that returns a cookie that causes poll_state_synchronize_rcu() to always
return true. This already-completed cookie can be stored in place of the
cookie that previously caused poll_state_synchronize_rcu() to return true.
It can also be used to flag a given structure as not having been exposed
to readers, and thus not requiring a grace period to elapse.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, poll_state_synchronize_rcu() uses rcu_seq_done() to check
whether the specified grace period has completed. However, rcu_seq_done()
does a simple comparison that reserves have of the sequence-number space
for uncompleted grace periods. This has the unfortunate side-effect
of not handling sequence-number wrap gracefully. Of course, one can
argue that if someone has already waited for half of the full range of
grace periods, they can wait for the other half, but why wait at all in
this case?
This commit therefore creates a rcu_seq_done_exact() that counts as
uncompleted only the two grace periods during which the sequence number
might have been handed out, while still being uncompleted. This way,
if sequence-number wrap happens to hit that range, at most two additional
grace periods need be waited for.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
all this caused merge conflicts with one susbystem or another.
This tree was put together to help try to avoid conflicts with these cleanups
going on different trees at time. So nothing exciting on this pull request,
just cleanups.
I actually had this sysctl-next tree up since v5.18 but I missed sending a
pull request for it on time during the last merge window. And so these changes
have been being soaking up on sysctl-next and so linux-next for a while.
The last change was merged May 4th.
Most of the compile issues were reported by 0day and fixed.
To help avoid a conflict with bpf folks at Daniel Borkmann's request
I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
moves the BPF sysctls from kernel/sysctl.c to BPF core.
Possible merge conflicts and known resolutions as per linux-next:
bfp:
https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
rcu:
https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
powerpc:
https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=btwh
-----END PGP SIGNATURE-----
Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
-----BEGIN PGP SIGNATURE-----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=pN3o
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Offload writing printk() messages on consoles to per-console
kthreads.
It prevents soft-lockups when an extensive amount of messages is
printed. It was observed, for example, during boot of large systems
with a lot of peripherals like disks or network interfaces.
It prevents live-lockups that were observed, for example, when
messages about allocation failures were reported and a CPU handled
consoles instead of reclaiming the memory. It was hard to solve even
with rate limiting because it would need to take into account the
amount of messages and the speed of all consoles.
It is a must to have for real time. Otherwise, any printk() might
break latency guarantees.
The per-console kthreads allow to handle each console on its own
speed. Slow consoles do not longer slow down faster ones. And
printk() does not longer unpredictably slows down various code paths.
There are situations when the kthreads are either not available or
not reliable, for example, early boot, suspend, or panic. In these
situations, printk() uses the legacy mode and tries to handle
consoles immediately.
- Add documentation for the printk index.
* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk, tracing: fix console tracepoint
printk: remove @console_locked
printk: extend console_lock for per-console locking
printk: add kthread console printers
printk: add functions to prefer direct printing
printk: add pr_flush()
printk: move buffer definitions into console_emit_next_record() caller
printk: refactor and rework printing logic
printk: add con_printk() macro for console details
printk: call boot_delay_msec() in printk_delay()
printk: get caller_id/timestamp after migration disable
printk: wake waiters for safe and NMI contexts
printk: wake up all waiters
printk: add missing memory barrier to wake_up_klogd()
printk: cpu sync always disable interrupts
printk: rename cpulock functions
printk/index: Printk index feature documentation
MAINTAINERS: Add printk indexing maintainers on mention of printk_index
Currently both expedited and regular grace period stall warnings use
a single timeout value that with units of seconds. However, recent
Android use cases problem require a sub-100-millisecond expedited RCU CPU
stall warning. Given that expedited RCU grace periods normally complete
in far less than a single millisecond, especially for small systems,
this is not unreasonable.
Therefore introduce the CONFIG_RCU_EXP_CPU_STALL_TIMEOUT kernel
configuration that defaults to 20 msec on Android and remains the same
as that of the non-expedited stall warnings otherwise. It also can be
changed in run-time via: /sys/.../parameters/rcu_exp_cpu_stall_timeout.
[ paulmck: Default of zero to use CONFIG_RCU_STALL_TIMEOUT. ]
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 9c7ef4c30f12 ("srcu: Make Tree SRCU able to operate without
snp_node array") initializes the local variable sdp differently depending
on the srcu's state in srcu_gp_start(). Either way, this initialization
overwrites the value used when sdp is defined.
This commit therefore drops this pointless definition-time initialization.
Although there is no functional change, compiler code generation may
be affected.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an SRCU reader blocks while a synchronize_srcu_expedited() waits for
that same reader, then that grace period will spawn an endless series of
workqueue handlers, consuming a full CPU. This quickly gets pointless
because consuming more CPU isn't going to make that reader get done
faster, especially if it is blocked waiting for an external event.
This commit therefore spawns at most one pair of back-to-back workqueue
handlers per expedited grace period phase, instead inserting increasing
delays as that grace period phase grows older, but capped at 10 jiffies.
In any case, if there have been at least 100 back-to-back workqueue
handlers within a single jiffy, regardless of grace period or grace-period
phase, then a one-jiffy delay is inserted.
[ paulmck: Apply feedback from kernel test robot. ]
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Song Liu <song@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit increases the sensitivity of contention detection by adding
checks to the acquisition of the srcu_data structure's lock on the
call_srcu() code path.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a srcutree.convert_to_big option of zero that causes
SRCU to decide at boot whether to wait for contention (small systems) or
immediately expand to large (large systems). A new srcutree.big_cpu_lim
(defaulting to 128) defines how many CPUs constitute a large system.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.
Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.
This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).
When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:
- emergency reboot/shutdown
- cpu and rcu stalls
- hard and soft lockups
- hung tasks
- warn
- sysrq
Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When booting kernels built with both CONFIG_RCU_STRICT_GRACE_PERIOD=y
and CONFIG_PREEMPT_RT=y, the rcu_read_unlock_special() function's
invocation of irq_work_queue_on() the init_irq_work() causes the
rcu_preempt_deferred_qs_handler() function to work execute in SCHED_FIFO
irq_work kthreads. Because rcu_read_unlock_special() is invoked on each
rcu_read_unlock() in such kernels, the amount of work just keeps piling
up, resulting in a boot-time hang.
This commit therefore avoids this hang by using IRQ_WORK_INIT_HARD()
instead of init_irq_work(), but only in kernels built with both
CONFIG_PREEMPT_RT=y and CONFIG_RCU_STRICT_GRACE_PERIOD=y.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_sync_enter() function is used by updaters to force RCU readers
(e.g. percpu-rwsem) to use their slow paths during an update. This is
accomplished by setting the ->gp_state of the rcu_sync structure to
GP_ENTER. In the case of percpu-rwsem, the readers' slow path waits on
a semaphore instead of just incrementing a reader count. Each updater
invokes the rcu_sync_exit() function to signal to readers that they
may again take their fastpaths. The rcu_sync_exit() function sets the
->gp_state of the rcu_sync structure to GP_EXIT, and if all goes well,
after a grace period the ->gp_state reverts back to GP_IDLE.
Unfortunately, the rcu_sync_enter() function currently has a comment
incorrectly stating that rcu_sync_exit() (by an updater) will re-enable
reader "slowpaths". This patch changes the comment to state that this
function re-enables reader fastpaths.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For the spawning of the priority-boost kthreads can fail, improbable
though this might seem. This commit therefore refrains from attemoting
to initiate RCU priority boosting when The ->boost_kthread_task pointer
is NULL.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An early check on synchronize_rcu[_expedited]() tries to determine if
the current CPU is in UP mode on an SMP no-preempt kernel, in which case
there is no need to start a grace period since the current assumed
quiescent state is all we need.
However the preemption mode doesn't take into account the boot selected
preemption mode under CONFIG_PREEMPT_DYNAMIC=y, missing a possible
early return if the running flavour is "none" or "voluntary".
Use the shiny new preempt mode accessors to fix this. However,
avoid invoking them during early boot because doing so triggers a
WARN_ON_ONCE().
[ paulmck: Update for mainlined API. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's synchronous grace periods act quite differently when there is
only one online CPU, especially in the no-op case in kernels built with
CONFIG_PREEMPTION=n. This change in behavior can be important debugging
information, so this commit adds the number of online CPUs to the RCU
CPU stall warning messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The final "if" statement in rcu_gp_cleanup() has proven to be rather
confusing, straightforward though it might have seemed when initially
written. This commit therefore adds comments to its "then" and "else"
clauses to at least provide a more elevated form of confusion.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A report of a 12-jiffy normal RCU CPU stall warning raises interesting
questions about the nature of time on the offending system. This commit
instruments rcu_sched_clock_irq(), which is RCU's hook into the
scheduling-clock interrupt, checking for the jiffies counter going
backwards.
Reported-by: Saravanan D <sarvanand@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Suppose we have a kernel built with both CONFIG_RCU_STRICT_GRACE_PERIOD=y
and CONFIG_PREEMPT=y. Suppose further that an RCU reader from which RCU
core needs a quiescent state ends in rcu_preempt_deferred_qs_irqrestore().
This function will then invoke rcu_report_qs_rdp() in order to immediately
report that quiescent state. Unfortunately, it will not have cleared
that reader's CPU's rcu_data structure's ->cpu_no_qs.b.norm field.
As a result, rcu_report_qs_rdp() will take an early exit because it
will believe that this CPU has not yet encountered a quiescent state,
and there will be no reporting of the current quiescent state.
This commit therefore causes rcu_preempt_deferred_qs_irqrestore() to
clear the ->cpu_no_qs.b.norm field before invoking rcu_report_qs_rdp().
Kudos to Boqun Feng and Neeraj Upadhyay for helping with analysis of
this issue!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The TASKS_RUDE_RCU does not select IRQ_WORK, which can result in build
failures for kernels that do not otherwise select IRQ_WORK. This commit
therefore causes the TASKS_RUDE_RCU Kconfig option to select IRQ_WORK.
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture module has an rcu_torture_writer task that repeatedly
performs writes, synchronizations, and deletes. There is a corner-case
check in rcu_torture_writer() wherein if nsynctypes is 0, a warning is
issued and the task waits to be stopped via a call to
torture_kthread_stopping() rather than performing any work.
There should be a return statement following this call to
torture_kthread_stopping(), as the intention with issuing the call to
torture_kthread_stopping() in the first place is to avoid the
rcu_torture_writer task from performing any work. Some of the work may even
be dangerous to perform, such as potentially causing a #DE due to
nsynctypes being used in a modulo operator when querying for sync updates
to issue.
This patch adds the missing return call. As a bonus, it also fixes a
checkpatch warning that was emitted due to the WARN_ONCE() call using the
name of the function rather than __func__.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture module is used to run torture tests that validate RCU.
rcutorture takes a variety of module parameters that configure the
functionality of the test. Amongst these parameters are the types of
synchronization mechanisms that the rcu_torture_writer and
rcu_torture_fakewriter tasks may use, and the torture_type of the run which
determines what read and sync operations are used by the various writer and
reader tasks that run throughout the test.
When the module is configured to only use sync types for which the
specified torture_type does not implement the necessary operations, we can
end up in a state where nsynctypes is 0. This is not an erroneous state,
but it currently crashes the kernel with a #DE due to nsynctypes being used
with a modulo operator in rcu_torture_fakewriter().
Here is an example of such a #DE:
$ insmod ./rcutorture.ko gp_cond=1 gp_cond_exp=0 gp_exp=0 gp_poll_exp=0
gp_normal=0 gp_poll=0 gp_poll_exp=0 verbose=9999 torture_type=trivial
...
[ 8536.525096] divide error: 0000 [#1] PREEMPT SMP PTI
[ 8536.525101] CPU: 30 PID: 392138 Comm: rcu_torture_fak Kdump: loaded Tainted: G S 5.17.0-rc1-00179-gc8c42c80febd #24
[ 8536.525105] Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
[ 8536.525106] RIP: 0010:rcu_torture_fakewriter+0xf1/0x2d0 [rcutorture]
[ 8536.525121] Code: 00 31 d2 8d 0c f5 00 00 00 00 48 63 c9 48 f7 f1 48 85 d2 0f 84 79 ff ff ff 48 89 e7 e8 78 78 01 00 48 63 0d 29 ca 00 00 31 d2 <48> f7 f1 8b 04 95 00 05 4e a0 83 f8 06 0f 84 ad 00 00 00 7f 1f 83
[ 8536.525124] RSP: 0018:ffffc9000777fef0 EFLAGS: 00010246
[ 8536.525127] RAX: 00000000223d006e RBX: cccccccccccccccd RCX: 0000000000000000
[ 8536.525130] RDX: 0000000000000000 RSI: ffffffff824315b9 RDI: ffffc9000777fef0
[ 8536.525132] RBP: ffffc9000487bb30 R08: 0000000000000002 R09: 000000000002a580
[ 8536.525134] R10: ffffffff82c5f920 R11: 0000000000000000 R12: ffff8881a2c35d00
[ 8536.525136] R13: ffff8881540c8d00 R14: ffffffffa04d39d0 R15: 0000000000000000
[ 8536.525137] FS: 0000000000000000(0000) GS:ffff88903ff80000(0000) knlGS:0000000000000000
[ 8536.525140] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8536.525142] CR2: 00007f839f022000 CR3: 0000000002c0a006 CR4: 00000000007706e0
[ 8536.525144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8536.525145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8536.525147] PKRU: 55555554
[ 8536.525148] Call Trace:
[ 8536.525150] <TASK>
[ 8536.525153] kthread+0xe8/0x110
[ 8536.525161] ? kthread_complete_and_exit+0x20/0x20
[ 8536.525167] ret_from_fork+0x22/0x30
[ 8536.525174] </TASK>
The solution is to gracefully handle the case of nsynctypes being 0 in
rcu_torture_fakewriter() by not performing any work. This is already being
done in rcu_torture_writer(), though there is a missing return on that path
which will be fixed in a subsequent patch.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tree RCU supports grace-period delays using the rcutree.gp_cleanup_delay,
rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot
parameters. These delays are strictly for debugging purposes, and have
proven quite effective at exposing bugs involving race with CPU-hotplug
operations. However, these delays can result in false positives when
used in conjunction with callback flooding, for example, those generated
by the rcutorture.fwd_progress kernel boot parameter.
This commit therefore suppresses grace-period delays while callback
flooding is in progress.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the cpu_possible_mask is sparse (for example, if bits are set only for
CPUs 0, 4, 8, ...), then rcu_tasks_invoke_cbs() will access per-CPU data
for a CPU not in cpu_possible_mask. It makes these accesses while doing
a workqueue-based binary search for non-empty callback lists. Although
this search must pass through CPUs not represented in cpu_possible_mask,
it has no need to check the callback list for such CPUs.
This commit therefore changes the rcu_tasks_invoke_cbs() function's
binary search so as to only check callback lists for CPUs present in
cpu_possible_mask.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the rcupdate.rcu_task_enqueue_lim kernel boot parameter is set to
something greater than 1 and less than nr_cpu_ids, the code attempts to
use a subset of the CPU's RCU Tasks callback lists. This works, but only
if the cpu_possible_mask is contiguous. If there are "holes" in this
mask, the callback-enqueue code might attempt to access a non-existent
per-CPU ->rtcpu variable for a non-existent CPU. For example, if only
CPUs 0, 4, 8, 12, 16 and so on are in cpu_possible_mask, specifying
rcupdate.rcu_task_enqueue_lim=4 would cause the code to attempt to
use callback queues for non-existent CPUs 1, 2, and 3. Because such
systems have existed in the past and might still exist, the code needs
to gracefully handle this situation.
This commit therefore checks to see whether the desired CPU is present
in cpu_possible_mask, and, if not, searches for the next CPU. This means
that the systems administrator of a system with a sparse cpu_possible_mask
will need to account for this sparsity when specifying the value of
the rcupdate.rcu_task_enqueue_lim kernel boot parameter. For example,
setting this parameter to the value 4 will use only CPUs 0 and 4, which
CPU 4 getting three times the callback load of CPU 0.
This commit assumes that bit (nr_cpu_ids - 1) is always set in
cpu_possible_mask.
Link: https://lore.kernel.org/lkml/CANn89iKaNEwyNZ=L_PQnkH0LP_XjLYrr_dpyRKNNoDJaWKdrmg@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the show_rcu_tasks_generic_gp_kthread() function only looks
at CPU 0's callback lists. Although this is not fatal, it can confuse
debugging efforts in cases where any of the Tasks RCU flavors are in
per-CPU queueing mode. This commit therefore causes this function to
scan all CPUs' callback queues.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The use of hrtimers for RCU-tasks grace-period delays works well in
general, but can result in excessive grace-period delays for some
corner-case workloads. This commit therefore reverts to the use of
timers for non-RT kernels to mitigate those grace-period delays.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronous RCU-tasks grace-period-wait primitives invoke
schedule_timeout_idle() to give readers a chance to exit their
read-side critical sections. Unfortunately, this fails during early
boot on PREEMPT_RT because PREEMPT_RT relies solely on ksoftirqd to run
timer handlers. Because ksoftirqd cannot operate until its kthreads
are spawned, there is a brief period of time following scheduler
initialization where PREEMPT_RT cannot run the timer handlers that
schedule_timeout_idle() relies on, resulting in a hang.
To avoid this boot-time hang, this commit replaces schedule_timeout_idle()
with schedule_hrtimeout(), so that the timer expires in hardirq context.
This is ensures that the timer fires even on PREEMPT_RT throughout the
irqs-enabled portions of boot as well as during runtime.
The timer is set to expire between fract and fract + HZ / 2 jiffies in
order to align with any other timers that might expire during that time,
thus reducing the number of wakeups.
Note that RCU-tasks grace periods are infrequent, so the use of hrtimer
should be fine. In contrast, in common-case code, user of hrtimer
could result in performance issues.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The main Tasks RCU quiescent state is voluntary context switch. However,
userspace execution is also a valid quiescent state, and is a valuable one
for userspace applications that spin repeatedly executing light-weight
non-sleeping system calls. Currently, such an application can delay a
Tasks RCU grace period for many tens of seconds.
This commit therefore enlists the aid of the scheduler-clock interrupt to
provide a Tasks RCU quiescent state when it interrupted a task executing
in userspace.
[ paulmck: Apply feedback from kernel test robot. ]
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Neil Spring <ntspring@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The waitqueue used by rcu_tasks_kthread() has always only one waiter.
With a guaranteed only one waiter, this can be replaced with rcuwait
which is smaller and simpler. With rcuwait based wake counterpart, the
irqwork function (call_rcu_tasks_iw_wakeup()) can be invoked hardirq
context because it is only a wake up and no sleeping locks are involved
(unlike the wait_queue_head).
As a side effect, this is also one piece of the puzzle to pass the RCU
selftest at early boot on PREEMPT_RT.
Replace wait_queue_head with rcuwait and let the irqwork run in hardirq
context on PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU-tasks stall-warning messages are printed after the grace period is ten
minutes old. Unfortunately, most of us will have rebooted the system in
response to an apparently-hung command long before the ten minutes is up,
and will thus see what looks to be a silent hang.
This commit therefore adds pr_info() messages that are printed earlier.
These should avoid being classified as errors, but should give impatient
users a hint. These are controlled by new rcupdate.rcu_task_stall_info
and rcupdate.rcu_task_stall_info_mult kernel-boot parameters. The former
defines the initial delay in jiffies (defaulting to 10 seconds) and the
latter defines the multiplier (defaulting to 3). Thus, by default, the
first message will appear 10 seconds into the RCU-tasks grace period,
the second 40 seconds in, and the third 160 seconds in. There would be
a fourth at 640 seconds in, but the stall warning message appears 600
seconds in, and once a stall warning is printed for a given grace period,
no further informational messages are printed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.
[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.346652] Detected PIPT I-cache on CPU2
[ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.377255] Detected PIPT I-cache on CPU3
[ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.379040] ------------[ cut here ]------------
[ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[ 0.384850] Modules linked in:
[ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.388308] pc : __flush_work+0x12c/0x138
[ 0.388970] lr : __flush_work+0x80/0x138
[ 0.389620] sp : ffffffc00aaf3c60
[ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[ 0.401886] Call trace:
[ 0.402309] __flush_work+0x12c/0x138
[ 0.402941] schedule_on_each_cpu+0x228/0x278
[ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144
[ 0.404502] rcu_tasks_kthread+0x220/0x254
[ 0.405264] kthread+0x174/0x1ac
[ 0.405837] ret_from_fork+0x10/0x20
[ 0.406456] irq event stamp: 102
[ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[ 0.411890] ---[ end trace 0000000000000000 ]---
[ 0.413000] smp: Brought up 1 node, 4 CPUs
[ 0.413762] SMP: Total of 4 processors activated.
[ 0.414566] CPU features: detected: 32-bit EL0 Support
[ 0.415414] CPU features: detected: 32-bit EL1 Support
[ 0.416278] CPU features: detected: CRC32 instructions
[ 0.447021] Callback from call_rcu_tasks_rude() invoked.
[ 0.506693] Callback from call_rcu_tasks() invoked.
This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process. The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event. But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.
It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot. During that
time, there is only one online CPU, namely the boot CPU. Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem.
Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com/T/
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_spawn_gp_kthread() function is called as an early initcall, which
means that SMP initialization hasn't happened yet and only the boot CPU is
online. Therefore, create only the NOCB kthreads related to the boot CPU.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_spawn_gp_kthread() function is called as an early initcall,
which means that SMP initialization hasn't happened yet and only the
boot CPU is online. Therefore, create only the boost kthread for the
leaf node of the boot CPU.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_init() function is called way before SMP is initialized and
therefore only the boot CPU should be online at this stage.
Simplify the boot per-cpu initialization accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the RCU nocb initialization witness within rcu_state
to consolidate RCU's global state.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_is_nocb_cpu() function is no longer used, so this commmit
removes it.
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit instruments the acquisitions of the srcu_struct structure's
->lock, enabling the initiation of a transition from SRCU_SIZE_SMALL
to SRCU_SIZE_BIG when sufficient contention is experienced. The
instrumentation counts the number of trylock failures within the confines
of a single jiffy. If that number exceeds the value specified by the
srcutree.small_contention_lim kernel boot parameter (which defaults to
100), and if the value specified by the srcutree.convert_to_big kernel
boot parameter has the 0x10 bit set (defaults to 0), then a transition
will be automatically initiated.
By default, there will never be any transitions, so that none of the
srcu_struct structures ever gains an srcu_node array.
The useful values for srcutree.convert_to_big are:
0x00: Never convert.
0x01: Always convert at init_srcu_struct() time.
0x02: Convert when rcutorture prints its first round of statistics.
0x03: Decide conversion approach at boot given system size.
0x10: Convert if contention is encountered.
0x12: Convert if contention is encountered or when rcutorture prints
its first round of statistics, whichever comes first.
The value 0x11 acts the same as 0x01 because the conversion happens
before there is any chance of contention.
[ paulmck: Apply "static" feedback from kernel test robot. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Once there are contention-initiated size transitions, it will be
possible for rcutorture to initiate a transition at the same time
as a contention-initiated transition. This commit therefore creates
a concurrency-safe helper function named srcu_transition_to_big() to
safely initiate size transitions.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a comment explaining why an unprotected call to
list_add() from srcu_funnel_gp_start() can be safe. TL;DR: It is only
called during very early boot when we don't have no steeking concurrency!
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When an srcu_struct structure is created (but not in a kernel module)
by DEFINE_SRCU() and friends, the per-CPU srcu_data structure is
statically allocated. In all other cases, that structure is obtained
from alloc_percpu(), in which case cleanup_srcu_struct() must invoke
free_percpu() on the resulting ->sda pointer in the srcu_struct pointer.
Which it does.
Except that it also invokes free_percpu() on the ->sda pointer
referencing the statically allocated per-CPU srcu_data structures.
Which free_percpu() is surprisingly OK with.
This commit nevertheless stops cleanup_srcu_struct() from freeing
statically allocated per-CPU srcu_data structures.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
You really shouldn't invoke srcu_torture_stats_print() after invoking
cleanup_srcu_struct(), but there is really no reason to get a
compiler-obfuscated per-CPU-variable NULL pointer dereference as the
diagnostic. This commit therefore checks for NULL ->sda and makes a
more polite console-message complaint in that case.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds an srcu_tree.convert_to_big kernel parameter that either
refuses to convert at all (0), converts immediately at init_srcu_struct()
time (1), or lets rcutorture convert it (2). An addition contention-based
dynamic conversion choice will be added, along with documentation.
[ paulmck: Apply callback-scanning feedback from Neeraj Upadhyay. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For configurations where snp node tree is not initialized at
init time (added in subsequent commits), srcu_funnel_gp_start()
and srcu_funnel_exp_start() can potential traverse and observe
the snp nodes' transient (uninitialized) states. This can potentially
happen, when init_srcu_struct_nodes() initialization of sdp->mynode
races with srcu_funnel_gp_start() and srcu_funnel_exp_start()
Consider the case below where srcu_funnel_gp_start() observes
sdp->mynode to be not NULL and uses an uninitialized sdp->grpmask
P1 P2
init_srcu_struct_nodes() void srcu_funnel_gp_start(...)
{
for_each_possible_cpu(cpu) {
...
sdp->mynode = &snp_first[...];
for (snp = sdp->mynode;...) struct srcu_node *snp_leaf =
smp_load_acquire(&sdp->mynode)
... if (snp_leaf) {
for (snp = snp_leaf; ...)
...
if (snp == snp_leaf)
snp->srcu_data_have_cbs[idx] |=
sdp->grpmask;
sdp->grpmask =
1 << (cpu - sdp->mynode->grplo);
}
}
Similarly, init_srcu_struct_nodes() and srcu_funnel_exp_start() can
race, where srcu_funnel_exp_start() could observe state of snp lock
before spin_lock_init().
P1 P2
init_srcu_struct_nodes() void srcu_funnel_exp_start(...)
{
srcu_for_each_node_breadth_first(ssp, snp) { for (; ...) {
spin_lock_...(snp, )
spin_lock_init(&ACCESS_PRIVATE(snp, lock));
...
}
for_each_possible_cpu(cpu) {
...
sdp->mynode = &snp_first[...];
To avoid these issues, ensure that snp node tree initialization is
complete i.e. after SRCU_SIZE_WAIT_BARRIER srcu_size_state is reached,
before traversing the tree. Given that srcu_funnel_gp_start() and
srcu_funnel_exp_start() are called within SRCU read side critical
sections, this check is safe, in the sense that all callbacks are
enqueued on CPU0 srcu_cblist until SRCU_SIZE_WAIT_CALL is entered,
and these read side critical sections (containing srcu_funnel_gp_start()
and srcu_funnel_exp_start()) need to complete, before SRCU_SIZE_WAIT_CALL
is reached.
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, tree SRCU relies on the srcu_node structures being initialized
at the same time that the srcu_struct itself is initialized, and thus
use the initial grace-period sequence number as the initial value for
the srcu_node structure's ->srcu_have_cbs[] and ->srcu_gp_seq_needed_exp
fields. Although this has a high probability of also working when the
srcu_node array is allocated and initialized at some random later time,
it would be better to avoid leaving such things to chance.
This commit therefore initializes these fields with 0x2, which is a
recognizable invalid value. It then adds the required checks for this
invalid value in order to avoid confusion on long-running kernels
(especially those on 32-bit systems) that allocate and initialize
srcu_node arrays late in life.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, srcu_funnel_gp_start() tests snp->srcu_have_cbs[idx] and then
separately assigns it to the snp_seq local variable. This commit does
the assignment earlier to simplify the code a bit. While in the area,
this commit also takes advantage of the 100-character line limit to put
the call to srcu_schedule_cbs_sdp() on a single line.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the numeric and string version of ->srcu_size_state to
the Tree-SRCU-specific portion of the rcutorture output.
[ paulmck: Apply feedback from kernel test robot and Dan Carpenter. ]
[ quic_neeraju: Apply feedback from Jiapeng Chong. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is just dead code at the moment, and will be used once
the state-transition code is activated.
Because srcu_barrier() must be aware of transition before call_srcu(), the
state machine waits for an SRCU grace period before callbacks are queued
to the non-CPU-0 queues. This requres that portions of srcu_barrier()
be enclosed in an SRCU read-side critical section.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit shrinks the srcu_struct structure by converting its ->node
field from a fixed-size compile-time array to a pointer to a dynamically
allocated array. In kernels built with large values of NR_CPUS that boot
on systems with smaller numbers of CPUs, this can save significant memory.
[ paulmck: Apply kernel test robot feedback. ]
Reported-by: A cast of thousands
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes Tree SRCU able to operate without an snp_node
array, that is, when the srcu_data structures' ->mynode pointers
are NULL. This can result in high contention on the srcu_struct
structure's ->lock, but only when there are lots of call_srcu(),
synchronize_srcu(), and synchronize_srcu_expedited() calls.
Note that when there is no snp_node array, all SRCU callbacks use
CPU 0's callback queue. This is optimal in the common case of low
update-side load because it removes the need to search each CPU
for the single callback that made the grace period happen.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the srcu_funnel_gp_start() walks its local variable snp up the
tree and reloads sdp->mynode whenever it is necessary to check whether
it is still at the leaf srcu_node level. This works, but is a bit more
obtuse than absolutely necessary. In addition, upcoming commits will
dynamically size srcu_struct structures, in which case sdp->mynode will
no longer necessarily be a constant, and this commit helps prepare for
that dynamic sizing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, cleanup_srcu_struct() checks for a grace period in progress,
but it does not check for a grace period that has not yet started but
which might start at any time. Such a situation could result in a
use-after-free bug, so this commit adds a check for a grace period that
is needed but not yet started to cleanup_srcu_struct().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
move rt_period/runtime sysctls to rt.c and use the new
register_sysctl_init() to register the sysctl interface.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
This pull request contains the following branches:
exp.2022.02.24a: Contains a fix for idle detection from Neeraj Upadhyay
and missing access marking detected by KCSAN.
fixes.2022.02.14a: Miscellaneous fixes.
rcu_barrier.2022.02.08a: Reduces coupling between rcu_barrier() and
CPU-hotplug operations, so that rcu_barrier() no longer needs
to do cpus_read_lock(). This may also someday allow system
boot to bring CPUs online concurrently.
rcu-tasks.2022.02.08a: Enable more aggressive movement to per-CPU
queueing when reacting to excessive lock contention due
to workloads placing heavy update-side stress on RCU tasks.
rt.2022.02.01b: Improvements to RCU priority boosting, including
changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken.
torture.2022.02.01b: Various fixes improving test robustness and
debug information.
torturescript.2022.02.08a: Add tests for SRCU size transitions, further
compress torture.sh build products, and improve debug output.
-----BEGIN PGP SIGNATURE-----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=ljVY
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Fix idle detection (Neeraj Upadhyay) and missing access marking
detected by KCSAN.
- Reduce coupling between rcu_barrier() and CPU-hotplug operations, so
that rcu_barrier() no longer needs to do cpus_read_lock(). This may
also someday allow system boot to bring CPUs online concurrently.
- Enable more aggressive movement to per-CPU queueing when reacting to
excessive lock contention due to workloads placing heavy update-side
stress on RCU tasks.
- Improvements to RCU priority boosting, including changes from Neeraj
Upadhyay, Zqiang, and Alison Chaiken.
- Various fixes improving test robustness and debug information.
- Add tests for SRCU size transitions, further compress torture.sh
build products, and improve debug output.
- Miscellaneous fixes.
* tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
rcu: Replace cpumask_weight with cpumask_empty where appropriate
rcu: Remove __read_mostly annotations from rcu_scheduler_active externs
rcu: Uninline multi-use function: finish_rcuwait()
rcu: Mark writes to the rcu_segcblist structure's ->flags field
kasan: Record work creation stack trace with interrupts enabled
rcu: Inline __call_rcu() into call_rcu()
rcu: Add mutex for rcu boost kthread spawning and affinity setting
rcu: Fix description of kvfree_rcu()
MAINTAINERS: Add Frederic and Neeraj to their RCU files
rcutorture: Provide non-power-of-two Tasks RCU scenarios
rcutorture: Test SRCU size transitions
torture: Make torture.sh help message match reality
rcu-tasks: Set ->percpu_enqueue_shift to zero upon contention
rcu-tasks: Use order_base_2() instead of ilog2()
rcu: Create and use an rcu_rdp_cpu_online()
rcu: Make rcu_barrier() no longer block CPU-hotplug operations
rcu: Rework rcu_barrier() and callback-migration logic
rcu: Refactor rcu_barrier() empty-list handling
rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion
torture: Change KVM environment variable to RCUTORTURE
...
With the removal of CONFIG_RCU_FAST_NO_HZ, the parameters in
rcu_needs_cpu() are not necessary anymore. Simply remove them.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
