mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
3474d1b93f
9882 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Alexander Gordeev
|
693d41f7c9 |
s390/mm: Restore mapping of kernel image using large pages
Since physical and virtual kernel address spaces are uncoupled
the kernel image is not mapped using large segment pages anymore,
which is a regression.
Put the kernel image at the same large segment page offset in
physical memory as in virtual memory. Such approach preserves
the existing number of bits of entropy used for randomization
of the kernel location in virtual memory when KASLR is on.
As result, the kernel is mapped using large segment pages.
Fixes:
|
||
|
Alexander Gordeev
|
d8073dc6bc |
s390/mm: Allow large pages only for aligned physical addresses
Do not allow creation of large pages against physical addresses,
which itself are not aligned on the correct boundary. Failure to
do so might lead to referencing wrong memory as result of the way
DAT works.
Fixes:
|
||
Heiko Carstens
|
b01b8151ef |
s390: Update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Alexander Gordeev
|
d38e48563c |
s390/crash: Do not use VM info if os_info does not have it
The virtual memory information stored in os_info area is
required for creation of the kernel image PT_LOAD program
header for kernels since commit a2ec5bec56dd ("s390/mm:
uncouple physical vs virtual address spaces").
By contrast, if such information in os_info is absent the
PT_LOAD program header should not be created.
Currently the proper PT_LOAD program header is created for
kernels that contain the virtual memory information, but
for kernels without one an invalid header of zero size is
created. That in turn leads to stand-alone dump failures.
Use OS_INFO_KASLR_OFFSET variable to check whether os_info
is present or not (same as crash and makedumpfile tools do)
and based on that create or do not create the kernel image
PT_LOAD program header.
Fixes:
|
||
Jeff Xu
|
ff388fe5c4 |
mseal: wire up mseal syscall
Patch series "Introduce mseal", v10.
This patchset proposes a new mseal() syscall for the Linux kernel.
In a nutshell, mseal() protects the VMAs of a given virtual memory range
against modifications, such as changes to their permission bits.
Modern CPUs support memory permissions, such as the read/write (RW) and
no-execute (NX) bits. Linux has supported NX since the release of kernel
version 2.6.8 in August 2004 [1]. The memory permission feature improves
the security stance on memory corruption bugs, as an attacker cannot
simply write to arbitrary memory and point the code to it. The memory
must be marked with the X bit, or else an exception will occur.
Internally, the kernel maintains the memory permissions in a data
structure called VMA (vm_area_struct). mseal() additionally protects the
VMA itself against modifications of the selected seal type.
Memory sealing is useful to mitigate memory corruption issues where a
corrupted pointer is passed to a memory management system. For example,
such an attacker primitive can break control-flow integrity guarantees
since read-only memory that is supposed to be trusted can become writable
or .text pages can get remapped. Memory sealing can automatically be
applied by the runtime loader to seal .text and .rodata pages and
applications can additionally seal security critical data at runtime. A
similar feature already exists in the XNU kernel with the
VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall
[4]. Also, Chrome wants to adopt this feature for their CFI work [2] and
this patchset has been designed to be compatible with the Chrome use case.
Two system calls are involved in sealing the map: mmap() and mseal().
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
The idea that inspired this patch comes from Stephen Röttger’s work in
V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this
API.
Indeed, the Chrome browser has very specific requirements for sealing,
which are distinct from those of most applications. For example, in the
case of libc, sealing is only applied to read-only (RO) or read-execute
(RX) memory segments (such as .text and .RELRO) to prevent them from
becoming writable, the lifetime of those mappings are tied to the lifetime
of the process.
Chrome wants to seal two large address space reservations that are managed
by different allocators. The memory is mapped RW- and RWX respectively
but write access to it is restricted using pkeys (or in the future ARM
permission overlay extensions). The lifetime of those mappings are not
tied to the lifetime of the process, therefore, while the memory is
sealed, the allocators still need to free or discard the unused memory.
For example, with madvise(DONTNEED).
However, always allowing madvise(DONTNEED) on this range poses a security
risk. For example if a jump instruction crosses a page boundary and the
second page gets discarded, it will overwrite the target bytes with zeros
and change the control flow. Checking write-permission before the discard
operation allows us to control when the operation is valid. In this case,
the madvise will only succeed if the executing thread has PKEY write
permissions and PKRU changes are protected in software by control-flow
integrity.
Although the initial version of this patch series is targeting the Chrome
browser as its first user, it became evident during upstream discussions
that we would also want to ensure that the patch set eventually is a
complete solution for memory sealing and compatible with other use cases.
The specific scenario currently in mind is glibc's use case of loading and
sealing ELF executables. To this end, Stephen is working on a change to
glibc to add sealing support to the dynamic linker, which will seal all
non-writable segments at startup. Once this work is completed, all
applications will be able to automatically benefit from these new
protections.
In closing, I would like to formally acknowledge the valuable
contributions received during the RFC process, which were instrumental in
shaping this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Liam R. Howlett: perf optimization.
Linus Torvalds: assisting in defining system call signature and scope.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
MM perf benchmarks
==================
This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to
check the VMAs’ sealing flag, so that no partial update can be made,
when any segment within the given memory range is sealed.
To measure the performance impact of this loop, two tests are developed.
[8]
The first is measuring the time taken for a particular system call,
by using clock_gettime(CLOCK_MONOTONIC). The second is using
PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have
similar results.
The tests have roughly below sequence:
for (i = 0; i < 1000, i++)
create 1000 mappings (1 page per VMA)
start the sampling
for (j = 0; j < 1000, j++)
mprotect one mapping
stop and save the sample
delete 1000 mappings
calculates all samples.
Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz,
4G memory, Chromebook.
Based on the latest upstream code:
The first test (measuring time)
syscall__ vmas t t_mseal delta_ns per_vma %
munmap__ 1 909 944 35 35 104%
munmap__ 2 1398 1502 104 52 107%
munmap__ 4 2444 2594 149 37 106%
munmap__ 8 4029 4323 293 37 107%
munmap__ 16 6647 6935 288 18 104%
munmap__ 32 11811 12398 587 18 105%
mprotect 1 439 465 26 26 106%
mprotect 2 1659 1745 86 43 105%
mprotect 4 3747 3889 142 36 104%
mprotect 8 6755 6969 215 27 103%
mprotect 16 13748 14144 396 25 103%
mprotect 32 27827 28969 1142 36 104%
madvise_ 1 240 262 22 22 109%
madvise_ 2 366 442 76 38 121%
madvise_ 4 623 751 128 32 121%
madvise_ 8 1110 1324 215 27 119%
madvise_ 16 2127 2451 324 20 115%
madvise_ 32 4109 4642 534 17 113%
The second test (measuring cpu cycle)
syscall__ vmas cpu cmseal delta_cpu per_vma %
munmap__ 1 1790 1890 100 100 106%
munmap__ 2 2819 3033 214 107 108%
munmap__ 4 4959 5271 312 78 106%
munmap__ 8 8262 8745 483 60 106%
munmap__ 16 13099 14116 1017 64 108%
munmap__ 32 23221 24785 1565 49 107%
mprotect 1 906 967 62 62 107%
mprotect 2 3019 3203 184 92 106%
mprotect 4 6149 6569 420 105 107%
mprotect 8 9978 10524 545 68 105%
mprotect 16 20448 21427 979 61 105%
mprotect 32 40972 42935 1963 61 105%
madvise_ 1 434 497 63 63 115%
madvise_ 2 752 899 147 74 120%
madvise_ 4 1313 1513 200 50 115%
madvise_ 8 2271 2627 356 44 116%
madvise_ 16 4312 4883 571 36 113%
madvise_ 32 8376 9319 943 29 111%
Based on the result, for 6.8 kernel, sealing check adds
20-40 nano seconds, or around 50-100 CPU cycles, per VMA.
In addition, I applied the sealing to 5.10 kernel:
The first test (measuring time)
syscall__ vmas t tmseal delta_ns per_vma %
munmap__ 1 357 390 33 33 109%
munmap__ 2 442 463 21 11 105%
munmap__ 4 614 634 20 5 103%
munmap__ 8 1017 1137 120 15 112%
munmap__ 16 1889 2153 263 16 114%
munmap__ 32 4109 4088 -21 -1 99%
mprotect 1 235 227 -7 -7 97%
mprotect 2 495 464 -30 -15 94%
mprotect 4 741 764 24 6 103%
mprotect 8 1434 1437 2 0 100%
mprotect 16 2958 2991 33 2 101%
mprotect 32 6431 6608 177 6 103%
madvise_ 1 191 208 16 16 109%
madvise_ 2 300 324 24 12 108%
madvise_ 4 450 473 23 6 105%
madvise_ 8 753 806 53 7 107%
madvise_ 16 1467 1592 125 8 108%
madvise_ 32 2795 3405 610 19 122%
The second test (measuring cpu cycle)
syscall__ nbr_vma cpu cmseal delta_cpu per_vma %
munmap__ 1 684 715 31 31 105%
munmap__ 2 861 898 38 19 104%
munmap__ 4 1183 1235 51 13 104%
munmap__ 8 1999 2045 46 6 102%
munmap__ 16 3839 3816 -23 -1 99%
munmap__ 32 7672 7887 216 7 103%
mprotect 1 397 443 46 46 112%
mprotect 2 738 788 50 25 107%
mprotect 4 1221 1256 35 9 103%
mprotect 8 2356 2429 72 9 103%
mprotect 16 4961 4935 -26 -2 99%
mprotect 32 9882 10172 291 9 103%
madvise_ 1 351 380 29 29 108%
madvise_ 2 565 615 49 25 109%
madvise_ 4 872 933 61 15 107%
madvise_ 8 1508 1640 132 16 109%
madvise_ 16 3078 3323 245 15 108%
madvise_ 32 5893 6704 811 25 114%
For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30
CPU cycles, there is even decrease in some cases.
It might be interesting to compare 5.10 and 6.8 kernel
The first test (measuring time)
syscall__ vmas t_5_10 t_6_8 delta_ns per_vma %
munmap__ 1 357 909 552 552 254%
munmap__ 2 442 1398 956 478 316%
munmap__ 4 614 2444 1830 458 398%
munmap__ 8 1017 4029 3012 377 396%
munmap__ 16 1889 6647 4758 297 352%
munmap__ 32 4109 11811 7702 241 287%
mprotect 1 235 439 204 204 187%
mprotect 2 495 1659 1164 582 335%
mprotect 4 741 3747 3006 752 506%
mprotect 8 1434 6755 5320 665 471%
mprotect 16 2958 13748 10790 674 465%
mprotect 32 6431 27827 21397 669 433%
madvise_ 1 191 240 49 49 125%
madvise_ 2 300 366 67 33 122%
madvise_ 4 450 623 173 43 138%
madvise_ 8 753 1110 357 45 147%
madvise_ 16 1467 2127 660 41 145%
madvise_ 32 2795 4109 1314 41 147%
The second test (measuring cpu cycle)
syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma %
munmap__ 1 684 1790 1106 1106 262%
munmap__ 2 861 2819 1958 979 327%
munmap__ 4 1183 4959 3776 944 419%
munmap__ 8 1999 8262 6263 783 413%
munmap__ 16 3839 13099 9260 579 341%
munmap__ 32 7672 23221 15549 486 303%
mprotect 1 397 906 509 509 228%
mprotect 2 738 3019 2281 1140 409%
mprotect 4 1221 6149 4929 1232 504%
mprotect 8 2356 9978 7622 953 423%
mprotect 16 4961 20448 15487 968 412%
mprotect 32 9882 40972 31091 972 415%
madvise_ 1 351 434 82 82 123%
madvise_ 2 565 752 186 93 133%
madvise_ 4 872 1313 442 110 151%
madvise_ 8 1508 2271 763 95 151%
madvise_ 16 3078 4312 1234 77 140%
madvise_ 32 5893 8376 2483 78 142%
From 5.10 to 6.8
munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma.
mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma.
madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma.
In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the
increase from 5.10 to 6.8 is significantly larger, approximately ten times
greater for munmap and mprotect.
When I discuss the mm performance with Brian Makin, an engineer who worked
on performance, it was brought to my attention that such performance
benchmarks, which measuring millions of mm syscall in a tight loop, may
not accurately reflect real-world scenarios, such as that of a database
service. Also this is tested using a single HW and ChromeOS, the data
from another HW or distribution might be different. It might be best to
take this data with a grain of salt.
This patch (of 5):
Wire up mseal syscall for all architectures.
Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com> [Bug #2]
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Linus Torvalds
|
2a8120d7b4 |
more s390 updates for 6.10 merge window
- Switch read and write software bits for PUDs - Add missing hardware bits for PUDs and PMDs - Generate unwind information for C modules to fix GDB unwind error for vDSO functions - Create .build-id links for unstripped vDSO files to enable vDSO debugging with symbols - Use standard stack frame layout for vDSO generated stack frames to manually walk stack frames without DWARF information - Rework perf_callchain_user() and arch_stack_walk_user() functions to reduce code duplication - Skip first stack frame when walking user stack - Add basic checks to identify invalid instruction pointers when walking stack frames - Introduce and use struct stack_frame_vdso_wrapper within vDSO user wrapper code to automatically generate an asm-offset define. Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document that the code works with user space stack - Clear the backchain of the extra stack frame added by the vDSO user wrapper code. This allows the user stack walker to detect and skip the non-standard stack frame. Without this an incorrect instruction pointer would be added to stack traces. - Rewrite psw_idle() function in C to ease maintenance and further enhancements - Remove get_vtimer() function and use get_cpu_timer() instead - Mark psw variable in __load_psw_mask() as __unitialized to avoid superfluous clearing of PSW - Remove obsolete and superfluous comment about removed TIF_FPU flag - Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle - Wipe sensitive data and all copies of protected- or secure-keys from stack when an IOCTL fails - Both do_airq_interrupt() and do_io_interrupt() functions set CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code - Provide iucv_alloc_device() and iucv_release_device() helpers, which can be used to deduplicate more or less identical IUCV device allocation and release code in four different drivers - Make use of iucv_alloc_device() and iucv_release_device() helpers to get rid of quite some code and also remove a cast to an incompatible function (clang W=1) - There is no user of iucv_root outside of the core IUCV code left. Therefore remove the EXPORT_SYMBOL - __apply_alternatives() contains a runtime check which verifies that the size of the to be patched code area is even. Convert this to a compile time check - Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands from 128 to 240 - Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally allowed - Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL block on 'scp_data' sysfs attribute update - Initialize the correct fields of the NVMe dump block, which were confused with FCP fields - Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce code duplication - Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such as dumpconf passing additional kernel command line parameters to a stand-alone dumper - Rework the CPACF query functions to use the correct RRE or RRF instruction formats and set instruction register fields correctly - Instead of calling BUG() at runtime force a link error during compile when a unsupported opcode is used with __cpacf_query() or __cpacf_check_opcode() functions - Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask or /sys/bus/ap/aqmask sysfs file update with a relative mask value - Fix "bindings complete" udev event which should be sent once all AP devices have been bound to device drivers and again when unbind/bind actions take place and all AP devices are bound again - Facility list alt_stfle_fac_list is nowhere used in the decompressor, therefore remove it there - Remove custom kprobes insn slot allocator in favour of the standard module_alloc() one, since kernel image and module areas are located within 4GB - Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid calling memset() with a large byte count and get rid of the sparse warning as result -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZkyx2BccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8PYZAP9KxEfTyUmIh61Gx8+m3BW5dy7p E2Q8yotlUpGj49ul+AD8CEAyTiWR95AlMOVZZLV/0J7XIjhALvpKAGfiJWkvXgc= =pife -----END PGP SIGNATURE----- Merge tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - Switch read and write software bits for PUDs - Add missing hardware bits for PUDs and PMDs - Generate unwind information for C modules to fix GDB unwind error for vDSO functions - Create .build-id links for unstripped vDSO files to enable vDSO debugging with symbols - Use standard stack frame layout for vDSO generated stack frames to manually walk stack frames without DWARF information - Rework perf_callchain_user() and arch_stack_walk_user() functions to reduce code duplication - Skip first stack frame when walking user stack - Add basic checks to identify invalid instruction pointers when walking stack frames - Introduce and use struct stack_frame_vdso_wrapper within vDSO user wrapper code to automatically generate an asm-offset define. Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document that the code works with user space stack - Clear the backchain of the extra stack frame added by the vDSO user wrapper code. This allows the user stack walker to detect and skip the non-standard stack frame. Without this an incorrect instruction pointer would be added to stack traces. - Rewrite psw_idle() function in C to ease maintenance and further enhancements - Remove get_vtimer() function and use get_cpu_timer() instead - Mark psw variable in __load_psw_mask() as __unitialized to avoid superfluous clearing of PSW - Remove obsolete and superfluous comment about removed TIF_FPU flag - Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle - Wipe sensitive data and all copies of protected- or secure-keys from stack when an IOCTL fails - Both do_airq_interrupt() and do_io_interrupt() functions set CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code - Provide iucv_alloc_device() and iucv_release_device() helpers, which can be used to deduplicate more or less identical IUCV device allocation and release code in four different drivers - Make use of iucv_alloc_device() and iucv_release_device() helpers to get rid of quite some code and also remove a cast to an incompatible function (clang W=1) - There is no user of iucv_root outside of the core IUCV code left. Therefore remove the EXPORT_SYMBOL - __apply_alternatives() contains a runtime check which verifies that the size of the to be patched code area is even. Convert this to a compile time check - Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands from 128 to 240 - Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally allowed - Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL block on 'scp_data' sysfs attribute update - Initialize the correct fields of the NVMe dump block, which were confused with FCP fields - Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce code duplication - Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such as dumpconf passing additional kernel command line parameters to a stand-alone dumper - Rework the CPACF query functions to use the correct RRE or RRF instruction formats and set instruction register fields correctly - Instead of calling BUG() at runtime force a link error during compile when a unsupported opcode is used with __cpacf_query() or __cpacf_check_opcode() functions - Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask or /sys/bus/ap/aqmask sysfs file update with a relative mask value - Fix "bindings complete" udev event which should be sent once all AP devices have been bound to device drivers and again when unbind/bind actions take place and all AP devices are bound again - Facility list alt_stfle_fac_list is nowhere used in the decompressor, therefore remove it there - Remove custom kprobes insn slot allocator in favour of the standard module_alloc() one, since kernel image and module areas are located within 4GB - Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid calling memset() with a large byte count and get rid of the sparse warning as result * tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/zcrypt: Use kvcalloc() instead of kvmalloc_array() s390/kprobes: Remove custom insn slot allocator s390/boot: Remove alt_stfle_fac_list from decompressor s390/ap: Fix bind complete udev event sent after each AP bus scan s390/ap: Fix crash in AP internal function modify_bitmap() s390/cpacf: Make use of invalid opcode produce a link error s390/cpacf: Split and rework cpacf query functions s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data' s390/ipl: Fix incorrect initialization of nvme dump block s390/ipl: Fix incorrect initialization of len fields in nvme reipl block s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds s390/alternatives: Convert runtime sanity check into compile time check s390/iucv: Unexport iucv_root tty: hvc-iucv: Make use of iucv_alloc_device() s390/smsgiucv_app: Make use of iucv_alloc_device() s390/netiucv: Make use of iucv_alloc_device() s390/vmlogrdr: Make use of iucv_alloc_device() s390/iucv: Provide iucv_alloc_device() / iucv_release_device() ... |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Linus Torvalds
|
25f4874662 |
RDMA v6.10 merge window
Normal set of driver updates and small fixes:
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs, GID's
and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZkeo2gAKCRCFwuHvBreF
YbuNAQChzGmS4F0JAn5Wj0CDvkZghELqtvzEb92SzqcgdyQafAD/fC7f23LJ4OsO
1ZIaQEZu7j9DVg5PKFZ7WfdXjGTKqwA=
=QRXg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Aside from the usual things this has an arch update for
__iowrite64_copy() used by the RDMA drivers.
This API was intended to generate large 64 byte MemWr TLPs on PCI.
These days most processors had done this by just repeating writel() in
a loop. S390 and some new ARM64 designs require a special helper to
get this to generate.
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs,
GID's and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits)
RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
RDMA/IPoIB: Fix format truncation compilation errors
bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
RDMA/efa: Support QP with unsolicited write w/ imm. receive
IB/hfi1: Remove generic .ndo_get_stats64
IB/hfi1: Do not use custom stat allocator
RDMA/hfi1: Use RMW accessors for changing LNKCTL2
RDMA/mana_ib: implement uapi for creation of rnic cq
RDMA/mana_ib: boundary check before installing cq callbacks
RDMA/mana_ib: introduce a helper to remove cq callbacks
RDMA/mana_ib: create and destroy RNIC cqs
RDMA/mana_ib: create EQs for RNIC CQs
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/ipoib: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.
RDMA/core: Add an option to display driver-specific QPs in the rdmatool
RDMA/efa: Add shutdown notifier
RDMA/mana_ib: Fix missing ret value
IB/mlx5: Use __iowrite64_copy() for write combining stores
...
|
||
|
Linus Torvalds
|
ff9a79307f |
Kbuild updates for v6.10
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
||
|
Linus Torvalds
|
70a663205d |
Probes updates for v6.10:
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'.
- uprobes: Some performance optimizations have been done.
. Speed up the BPF uprobe event by delaying the fetching of the uprobe
event arguments that are not used in BPF.
. Avoid locking by speculatively checking whether uprobe event is valid.
. Reduce lock contention by using read/write_lock instead of spinlock for
uprobe list operation. This improved BPF uprobe benchmark result 43% on
average.
- rethook: Removes non-fatal warning messages when tracing stack from BPF
and skip rcu_is_watching() validation in rethook if possible.
- objpool: Optimizing objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching nr_cpu_ids
because it is a const value.
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM
IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm
IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/
qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN
y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a
KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG
VqM=
=n/mW
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
|
||
|
Heiko Carstens
|
d890e6af50 |
s390/kprobes: Remove custom insn slot allocator
Since commit
|
||
Sven Schnelle
|
e7dec0b792 |
s390/boot: Remove alt_stfle_fac_list from decompressor
It is nowhere used in the decompressor, therefore remove it.
Fixes:
|
||
Harald Freudenberger
|
32e8bd6423 |
s390/cpacf: Make use of invalid opcode produce a link error
Instead of calling BUG() at runtime introduce and use a prototype for a non-existing function to produce a link error during compile when a not supported opcode is used with the __cpacf_query() or __cpacf_check_opcode() inline functions. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Harald Freudenberger
|
830999bd7e |
s390/cpacf: Split and rework cpacf query functions
Rework the cpacf query functions to use the correct RRE
or RRF instruction formats and set register fields within
instructions correctly.
Fixes:
|
||
Stephen Brennan
|
1a7d0890dd |
kprobe/ftrace: bail out if ftrace was killed
If an error happens in ftrace, ftrace_kill() will prevent disarming kprobes. Eventually, the ftrace_ops associated with the kprobes will be freed, yet the kprobes will still be active, and when triggered, they will use the freed memory, likely resulting in a page fault and panic. This behavior can be reproduced quite easily, by creating a kprobe and then triggering a ftrace_kill(). For simplicity, we can simulate an ftrace error with a kernel module like [1]: [1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer sudo perf probe --add commit_creds sudo perf trace -e probe:commit_creds # In another terminal make sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug # Back to perf terminal # ctrl-c sudo perf probe --del commit_creds After a short period, a page fault and panic would occur as the kprobe continues to execute and uses the freed ftrace_ops. While ftrace_kill() is supposed to be used only in extreme circumstances, it is invoked in FTRACE_WARN_ON() and so there are many places where an unexpected bug could be triggered, yet the system may continue operating, possibly without the administrator noticing. If ftrace_kill() does not panic the system, then we should do everything we can to continue operating, rather than leave a ticking time bomb. Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/ Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Linus Torvalds
|
a49468240e |
Modules changes for v6.10-rc1
Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded execmem_alloc()
and execmem_free() so to make emphasis these helpers are actually used outside
of modules. It starts with a no-functional changes API rename / placeholders
to then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges. Archs
now can intitialize this execmem_info as the last part of mm_core_init() if
they have to diverge from the norm. Each range is a known type clearly
articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future enhancements an
immediate clear gain is we get to enable KPROBES without MODULES now. That is
ultimately what motiviated to pick this work up again, now with smaller goal as
concrete stepping stone.
This has been sitting on linux-next for a little less than a month, a few issues
were found already and fixed, in particular an odd mips boot issue. Arch folks
reviewed the code too. This is ready for wider exposure and testing.
-----BEGIN PGP SIGNATURE-----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=Nsg4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
|
||
|
Linus Torvalds
|
1b294a1f35 |
Networking changes for 6.10.
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
||
Alexander Egorenkov
|
24bf80f78e |
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
This is analogous to the reipl's sysfs attribute named equally and enables tools such as s390-tools' dumpconf to pass additional kernel cmdline parameters to a stand-alone dumper such as zfcpdump (e.g. to enable debug output with 'dump_debug' parameter) or ngdump. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Alexander Egorenkov
|
005ca01333 |
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
This is a refactoring change to reduce code duplication and improve code reuse. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Alexander Egorenkov
|
7faacaeaf6 |
s390/ipl: Fix incorrect initialization of nvme dump block
Initialize the correct fields of the nvme dump block.
This bug had not been detected before because first, the fcp and nvme fields
of struct ipl_parameter_block are part of the same union and, therefore,
overlap in memory and second, they are identical in structure and size.
Fixes:
|
||
|
Alexander Egorenkov
|
9c922b73ac |
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
Use correct symbolic constants IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN
to initialize nvme reipl block when 'scp_data' sysfs attribute is
being updated. This bug had not been detected before because
the corresponding fcp and nvme symbolic constants are equal.
Fixes:
|
||
|
Alexander Egorenkov
|
247576bf62 |
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
The old implementation of vmcmd sysfs string attributes truncated passed z/VM CP diagnose X'008' commands which were longer than the max allowed number of characters but the reported number of written characters was still equal to the entire length of a given string. This can result in silent failures of some s390-tools (e.g. dumpconf) which can be very hard to detect. Therefore, this commit makes a write attempt to a vmcmd sysfs attribute * fail with E2BIG error if a given string is longer than the maximum allowed one * never destroy the old data in the vmcmd sysfs attribute if the new data doesn't fit into it entirely * return the actual number of written characters if it succeeds Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Alexander Egorenkov
|
72935e3ada |
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
z/VM CP diagnose X'008' accepts commands of max 240 characters. Using a smaller value as a buffer size makes kernel send truncated CP commands which are longer than the old buffer size. This can result in invalid CP commands passed to z/VM. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
207ddb9189 |
s390/alternatives: Convert runtime sanity check into compile time check
__apply_alternatives() contains a runtime check which verifies that the size of the to be patched code area is even. Convert this to a compile time check using a similar ".org" trick, which is already used to verify that old and new code areas have the same size. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Sven Schnelle
|
1084562ec8 |
s390/irq: Set CIF_NOHZ_DELAY in do_io_irq()
Both do_airq_interrupt() and do_io_interrupt() set CIF_NOHZ_DELAY. Move it to do_io_irq() to simplify the code. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Linus Torvalds
|
2d9db778dd |
Timers and timekeeping updates:
- Core code:
- Make timekeeping and VDSO time readouts resilent against math overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle the
multiplication overflow.
This functionality is enabled unconditionally in the kernel, but made
conditional in the VDSO code. The latter is conditional because it
allows architectures to optimize the check so it is not causing
performance regressions.
On X86 this is achieved by reworking the existing check for negative
TSC deltas as a negative delta obviously exceeds the maximum
deferrement when it is evaluated as an unsigned value. That avoids two
conditionals in the hotpath and allows to hide both the negative delta
and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
- Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers.
-----BEGIN PGP SIGNATURE-----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=pL+S
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core code:
- Make timekeeping and VDSO time readouts resilent against math
overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle
the multiplication overflow.
This functionality is enabled unconditionally in the kernel, but
made conditional in the VDSO code. The latter is conditional
because it allows architectures to optimize the check so it is not
causing performance regressions.
On X86 this is achieved by reworking the existing check for
negative TSC deltas as a negative delta obviously exceeds the
maximum deferrement when it is evaluated as an unsigned value. That
avoids two conditionals in the hotpath and allows to hide both the
negative delta and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers"
* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
rust: time: doc: Add missing C header links
clocksource: Make the int help prompt unit readable in ncurses
hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
timerqueue: Remove never used function timerqueue_node_expires()
rust: time: Add Ktime
vdso: Fix powerpc build U64_MAX undeclared error
clockevents: Convert s[n]printf() to sysfs_emit()
clocksource: Convert s[n]printf() to sysfs_emit()
clocksource: Make watchdog and suspend-timing multiplication overflow safe
timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
timekeeping: Make delta calculation overflow safe
timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
timekeeping: Fold in timekeeping_delta_to_ns()
timekeeping: Consolidate timekeeping helpers
timekeeping: Refactor timekeeping helpers
...
|
||
Masahiro Yamada
|
7f7f6f7ad6 |
Makefile: remove redundant tool coverage variables
Now Kbuild provides reasonable defaults for objtool, sanitizers, and profilers. Remove redundant variables. Note: This commit changes the coverage for some objects: - include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV - include arch/sparc/vdso/vdso-image-*.o into UBSAN - include arch/sparc/vdso/vma.o into UBSAN - include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vma.o into GCOV, KCOV - include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV I believe these are positive effects because all of them are kernel space objects. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Roberto Sassu <roberto.sassu@huawei.com> |
||
Thomas Huth
|
980fffff14 |
s390/fpu: Remove comment about TIF_FPU
It has been removed in commit
|
||
|
Sven Schnelle
|
7278a8fb8d |
s390: Mark psw in __load_psw_mask() as __unitialized
Without __unitialized, the following code is generated when INIT_STACK_ALL_ZERO is enabled: 86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15) 8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15) 92: c0 10 00 00 00 08 larl %r1, 0xa2 98: e3 10 f0 a8 00 24 stg %r1, 168(%r15) 9e: b2 b2 f0 a0 lpswe 160(%r15) The xc is not adding any security because psw is fully initialized with the following instructions. Add __unitialized to the psw definitiation to avoid the superfluous clearing of psw. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Sven Schnelle
|
095c89e99b |
s390/vtime: Use get_cpu_timer()
Instead of implementing get_vtimer() use get_cpu_timer() which does the same. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Sven Schnelle
|
fa2ae4a377 |
s390/idle: Rewrite psw_idle() in C
To ease maintenance and further enhancements, convert the psw_idle() function to C. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
|
Heiko Carstens
|
62b672c4ba |
s390/stackstrace: Detect vdso stack frames
Clear the backchain of the extra stack frame added by the vdso user wrapper
code. This allows the user stack walker to detect and skip the non-standard
stack frame. Without this an incorrect instruction pointer would be added
to stack traces, and stack frame walking would be continued with a more or
less random back chain.
Fixes:
|
||
|
Heiko Carstens
|
be72ea09c1 |
s390/vdso: Introduce and use struct stack_frame_vdso_wrapper
Introduce and use struct stack_frame_vdso_wrapper within vdso user wrapper
code. With this structure it is possible to automatically generate an
asm-offset define which can be used to save and restore the return address
of the calling function.
Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to
document that the code works with user space stack frames with the standard
stack frame layout.
Fixes:
|
||
|
Heiko Carstens
|
cd58109283 |
s390/stacktrace: Improve detection of invalid instruction pointers
Add basic checks to identify invalid instruction pointers when walking
stack frames:
Instruction pointers must
- have even addresses
- be larger than mmap_min_addr
- lower than the asce_limit of the process
Alternatively it would also be possible to walk page tables similar to fast
GUP and verify that the mapping of the corresponding page is executable,
however that seems to be overkill.
Fixes:
|
||
|
Heiko Carstens
|
87eceb17a9 |
s390/stacktrace: Skip first user stack frame
When walking user stack frames the first stack frame (where the stack
pointer points to) should be skipped: the return address of the current
function is saved in the previous stack frame, not the current stack frame,
which is allocated for to be called functions.
Fixes:
|
||
|
Heiko Carstens
|
ebd912ff99 |
s390/stacktrace: Merge perf_callchain_user() and arch_stack_walk_user()
The two functions perf_callchain_user() and arch_stack_walk_user() are
nearly identical. Reduce code duplication and add a common helper which can
be called by both functions.
Fixes:
|
||
|
Heiko Carstens
|
185445c7c1 |
s390/vdso: Use standard stack frame layout
By default user space is compiled with standard stack frame layout and not
with the packed stack layout. The vdso code however inherited the
-mpacked-stack compiler option from the kernel. Remove this option to make
sure the vdso is compiled with standard stack frame layout.
This makes sure that the stack frame backchain location for vdso generated
stack frames is the same like for calling code (if compiled with default
options). This allows to manually walk stack frames without DWARF
information, like the kernel is doing it e.g. with arch_stack_walk_user().
Fixes:
|
||
Jens Remus
|
10f7052536 |
s390/vdso: Generate unwind information for C modules
GDB fails to unwind vDSO functions with error message "PC not saved",
for instance when stepping through gettimeofday().
Add -fasynchronous-unwind-tables to CFLAGS to generate .eh_frame
DWARF unwind information for the vDSO C modules.
Fixes:
|
||
Claudio Imbrenda
|
712c5d5f62 |
s390/pgtable: Add missing hardware bits for puds, pmds
Add the table type and ACCF validity bits to _SEGMENT_ENTRY_BITS and
_SEGMENT_ENTRY_HARDWARE_BITS{,_LARGE}.
For completeness, introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE and
_REGION3_ENTRY_HARDWARE_BITS, containing the hardware bits used for
large puds and normal puds.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240429143409.49892-3-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
||
|
Claudio Imbrenda
|
3e93d49175 |
s390/pgtable: Switch read and write softbits for puds
There is no reason for the read and write softbits to be swapped in the puds compared to pmds. They are different only because the softbits for puds were introduced at the same time when the softbits for pmds were swapped. The current implementation is not wrong per se, since the macros are defined correctly; only the documentation does not reflect reality. With this patch, the read and write softbits for large pmd and large puds will have the same layout, and will match the existing documentation. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20240429143409.49892-2-imbrenda@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> |
||
Mike Rapoport (IBM)
|
0cc2dc4902 |
arch: make execmem setup available regardless of CONFIG_MODULES
execmem does not depend on modules, on the contrary modules use execmem. To make execmem available when CONFIG_MODULES=n, for instance for kprobes, split execmem_params initialization out from arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Mike Rapoport (IBM)
|
223b5e57d0 |
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
Extend execmem parameters to accommodate more complex overrides of module_alloc() by architectures. This includes specification of a fallback range required by arm, arm64 and powerpc, EXECMEM_MODULE_DATA type required by powerpc, support for allocation of KASAN shadow required by s390 and x86 and support for late initialization of execmem required by arm64. The core implementation of execmem_alloc() takes care of suppressing warnings when the initial allocation fails but there is a fallback range defined. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Song Liu <song@kernel.org> Tested-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Mike Rapoport (IBM)
|
12af2b83d0 |
mm: introduce execmem_alloc() and execmem_free()
module_alloc() is used everywhere as a mean to allocate memory for code. Beside being semantically wrong, this unnecessarily ties all subsystems that need to allocate code, such as ftrace, kprobes and BPF to modules and puts the burden of code allocation to the modules code. Several architectures override module_alloc() because of various constraints where the executable memory can be located and this causes additional obstacles for improvements of code allocation. Start splitting code allocation from modules by introducing execmem_alloc() and execmem_free() APIs. Initially, execmem_alloc() is a wrapper for module_alloc() and execmem_free() is a replacement of module_memfree() to allow updating all call sites to use the new APIs. Since architectures define different restrictions on placement, permissions, alignment and other parameters for memory that can be used by different subsystems that allocate executable memory, execmem_alloc() takes a type argument, that will be used to identify the calling subsystem and to allow architectures define parameters for ranges suitable for that subsystem. No functional changes. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Song Liu <song@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
6e5a0c30b6 |
Scheduler changes for v6.10:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt. affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt. arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix.
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=obph
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
|
||
Jakub Kicinski
|
6e62702feb |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGcZAAKCRDbK58LschI g6o6APwLsqhrM2w71VUN5ciCxu4H5VDtZp6wkdqtVbxxU4qNxQEApKgYgKt8ZLF3 Kily5c7m+S4ZXhMX21rb8JhSAz0dfQk= =5Dk7 -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-05-13 We've added 119 non-merge commits during the last 14 day(s) which contain a total of 134 files changed, 9462 insertions(+), 4742 deletions(-). The main changes are: 1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi. 2) Add BPF range computation improvements to the verifier in particular around XOR and OR operators, refactoring of checks for range computation and relaxing MUL range computation so that src_reg can also be an unknown scalar, from Cupertino Miranda. 3) Add support to attach kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. Session mode is a common use-case for tetragon and bpftrace, from Jiri Olsa. 4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf as well as BPF selftest's struct_ops handling, from Andrii Nakryiko. 5) Improvements to BPF selftests in context of BPF gcc backend, from Jose E. Marchesi & David Faust. 6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test- -style in order to retire the old test, run it in BPF CI and additionally expand test coverage, from Jordan Rife. 7) Big batch for BPF selftest refactoring in order to remove duplicate code around common network helpers, from Geliang Tang. 8) Another batch of improvements to BPF selftests to retire obsolete bpf_tcp_helpers.h as everything is available vmlinux.h, from Martin KaFai Lau. 9) Fix BPF map tear-down to not walk the map twice on free when both timer and wq is used, from Benjamin Tissoires. 10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL, from Alexei Starovoitov. 11) Change BTF build scripts to using --btf_features for pahole v1.26+, from Alan Maguire. 12) Small improvements to BPF reusing struct_size() and krealloc_array(), from Andy Shevchenko. 13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions, from Ilya Leoshkevich. 14) Extend TCP ->cong_control() callback in order to feed in ack and flag parameters and allow write-access to tp->snd_cwnd_stamp from BPF program, from Miao Xu. 15) Add support for internal-only per-CPU instructions to inline bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs, from Puranjay Mohan. 16) Follow-up to remove the redundant ethtool.h from tooling infrastructure, from Tushar Vyavahare. 17) Extend libbpf to support "module:<function>" syntax for tracing programs, from Viktor Malik. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits) bpf: make list_for_each_entry portable bpf: ignore expected GCC warning in test_global_func10.c bpf: disable strict aliasing in test_global_func9.c selftests/bpf: Free strdup memory in xdp_hw_metadata selftests/bpf: Fix a few tests for GCC related warnings. bpf: avoid gcc overflow warning in test_xdp_vlan.c tools: remove redundant ethtool.h from tooling infra selftests/bpf: Expand ATTACH_REJECT tests selftests/bpf: Expand getsockname and getpeername tests sefltests/bpf: Expand sockaddr hook deny tests selftests/bpf: Expand sockaddr program return value tests selftests/bpf: Retire test_sock_addr.(c|sh) selftests/bpf: Remove redundant sendmsg test cases selftests/bpf: Migrate ATTACH_REJECT test cases selftests/bpf: Migrate expected_attach_type tests selftests/bpf: Migrate wildcard destination rewrite test selftests/bpf: Migrate sendmsg6 v4 mapped address tests selftests/bpf: Migrate sendmsg deny test cases selftests/bpf: Migrate WILDCARD_IP test selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases ... ==================== Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
84c7d76b5a |
This update includes the following changes:
API: - Remove crypto stats interface. Algorithms: - Add faster AES-XTS on modern x86_64 CPUs. - Forbid curves with order less than 224 bits in ecc (FIPS 186-5). - Add ECDSA NIST P521. Drivers: - Expose otp zone in atmel. - Add dh fallback for primes > 4K in qat. - Add interface for live migration in qat. - Use dma for aes requests in starfive. - Add full DMA support for stm32mpx in stm32. - Add Tegra Security Engine driver. Others: - Introduce scope-based x509_certificate allocation. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmZBjXMACgkQxycdCkmx i6cQ7g/+JPKnzQedhpJSK5AnkAkqO9kJ16JdeB7AtdSeZZA/EIFxuXZ3Fv1fH44y 1CCibowc5zdss8F/1iOqPc57u5vy2Mjyw8qlhs7JlmcYf/lo7CBGfT8Uxo7BK/S9 n+/+y47Xu5p3yt/c6ldrwqjOaWaYuaCKICZtS91XVvrxM80iVnmDSQCNkcch4KQ4 nsdcVJhS4lOStBNjKtkhWlgufqdp8RPzKYH2B6GbW9z6en8WeTbnoMhgqjqQ3UID /DHtixyee0MDUDReQrixyCM3XMV5er/qBMoDrCxipBuVrr4GMd2GlCEaZbXfTUW0 3K8Nle4KMMqi81lBAQKiD/hRjrC68FHOvVRGHtZntR0+NZ/nlinXCVWv4iHwRzAB 7BOqRTC3mfv+uMhTvgwQAkXCHAhivMokSzTaDCIrzPLjKIx2BOfVZKmPBt98LxeW 8/JfgEK4gX6wxe4GRftueEApCfWQrwYK60j5bIkescaJ/mI7M5bEByvTTob1lAka Fw5kGDy8dVnrG9HagLwnXoI1pIGmca8hV1t24Vf1OCdWLgOW+GTCIuyutL2c9AWv 0vEbytGZl69XJlIgQGVcv9RM6NlIXxHwfSHU59N/SHTXhlHjm1XWi3HCiJaZ1b6+ pcILMJ29FMs8LobiN7PT+rNu6fboaH0/o+R7OK9mKRut864xFTk= =NDS0 -----END PGP SIGNATURE----- Merge tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove crypto stats interface Algorithms: - Add faster AES-XTS on modern x86_64 CPUs - Forbid curves with order less than 224 bits in ecc (FIPS 186-5) - Add ECDSA NIST P521 Drivers: - Expose otp zone in atmel - Add dh fallback for primes > 4K in qat - Add interface for live migration in qat - Use dma for aes requests in starfive - Add full DMA support for stm32mpx in stm32 - Add Tegra Security Engine driver Others: - Introduce scope-based x509_certificate allocation" * tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits) crypto: atmel-sha204a - provide the otp content crypto: atmel-sha204a - add reading from otp zone crypto: atmel-i2c - rename read function crypto: atmel-i2c - add missing arg description crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy() crypto: sahara - use 'time_left' variable with wait_for_completion_timeout() crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout() crypto: caam - i.MX8ULP donot have CAAM page0 access crypto: caam - init-clk based on caam-page0-access crypto: starfive - Use fallback for unaligned dma access crypto: starfive - Do not free stack buffer crypto: starfive - Skip unneeded fallback allocation crypto: starfive - Skip dma setup for zeroed message crypto: hisilicon/sec2 - fix for register offset crypto: hisilicon/debugfs - mask the unnecessary info from the dump crypto: qat - specify firmware files for 402xx crypto: x86/aes-gcm - simplify GCM hash subkey derivation crypto: x86/aes-gcm - delete unused GCM assembly code crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath() hwrng: stm32 - repair clock handling ... |
||
|
Linus Torvalds
|
d65e1a0f30 |
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error path - Swap IRQ and AP bus/device registration to avoid race conditions - Export prot_virt_guest symbol - Introduce AP configuration changes notifier interface to facilitate modularization of the AP bus - Add CONFIG_AP kernel configuration option to allow modularization of the AP bus - Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description and dependency and rename it to CONFIG_AP_DEBUG - Convert sprintf() and snprintf() to sysfs_emit() in CIO code - Adjust indentation of RELOCS command build step - Make crypto performance counters upward compatible - Convert make_page_secure() and gmap_make_secure() to use folio - Rework channel-utilization-block (CUB) handling in preparation of introducing additional CUBs - Use attribute groups to simplify registration, removal and extension of measurement-related channel-path sysfs attributes - Add a per-channel-path binary "ext_measurement" sysfs attribute that provides access to extended channel-path measurement data - Export measurement data for all channel-measurement-groups (CMG), not only for a specific ones. This enables support of new CMG data formats in userspace without the need for kernel changes - Add a per-channel-path sysfs attribute "speed_bps" that provides the operating speed in bits per second or 0 if the operating speed is not available - The CIO tracepoint subchannel-type field "st" is incorrectly set to the value of subchannel-enabled SCHIB "ena" field. Fix that - Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS - Consider the maximum physical address available to a DCSS segment (512GB) when memory layout is set up - Simplify the virtual memory layout setup by reducing the size of identity mapping vs vmemmap overlap - Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory. This will allow to place the kernel image next to kernel modules - Move everyting KASLR related from <asm/setup.h> to <asm/page.h> - Put virtual memory layout information into a structure to improve code generation - Currently __kaslr_offset is the kernel offset in both physical and virtual memory spaces. Uncouple these offsets to allow uncoupling of the addresses spaces - Currently the identity mapping base address is implicit and is always set to zero. Make it explicit by putting into __identity_base persistent boot variable and use it in proper context - Introduce .amode31 section start and end macros AMODE31_START and AMODE31_END - Introduce OS_INFO entries that do not reference any data in memory, but rather provide only values - Store virtual memory layout in OS_INFO. It is read out by makedumpfile, crash and other tools - Store virtual memory layout in VMCORE_INFO. It is read out by crash and other tools when /proc/kcore device is used - Create additional PT_LOAD ELF program header that covers kernel image only, so that vmcore tools could locate kernel text and data when virtual and physical memory spaces are uncoupled - Uncouple physical and virtual address spaces - Map kernel at fixed location when KASLR mode is disabled. The location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration value. - Rework deployment of kernel image for both compressed and uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel configuration value - Move .vmlinux.relocs section in front of the compressed kernel. The interim section rescue step is avoided as result - Correct modules thunk offset calculation when branch target is more than 2GB away - Kernel modules contain their own set of expoline thunks. Now that the kernel modules area is less than 4GB away from kernel expoline thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN the default if the compiler supports it - userfaultfd can insert shared zeropages into processes running VMs, but that is not allowed for s390. Fallback to allocating a fresh zeroed anonymous folio and insert that instead - Re-enable shared zeropages for non-PV and non-skeys KVM guests - Rename hex2bitmap() to ap_hex2bitmap() and export it for external use - Add ap_config sysfs attribute to provide the means for setting or displaying adapters, domains and control domains assigned to a vfio-ap mediated device in a single operation - Make vfio_ap_mdev_link_queue() ignore duplicate link requests - Add write support to ap_config sysfs attribute to allow atomic update a vfio-ap mediated device state - Document ap_config sysfs attribute - Function os_info_old_init() is expected to be called only from a regular kdump kernel. Enable it to be called from a stand-alone dump kernel - Address gcc -Warray-bounds warning and fix array size in struct os_info - s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks - Use unwinder instead of __builtin_return_address() with ftrace to prevent returning of undefined values - Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is disabled - Compile kernel with -fPIC and link with -no-pie to allow kpatch feature always succeed and drop the whole CONFIG_PIE_BUILD option-enabled code - Add missing virt_to_phys() converter for VSIE facility and crypto control blocks -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZjkp5xccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8D99AQCEby+KHssuZe9m0NvvikWREYBC myqob4EmdU3KdTEbNAEAt2OB7mzSQc90yjawI+Je7vwVyh3uc2Nb4Qg05yO6owI= =eOYN -----END PGP SIGNATURE----- Merge tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Store AP Query Configuration Information in a static buffer - Rework the AP initialization and add missing cleanups to the error path - Swap IRQ and AP bus/device registration to avoid race conditions - Export prot_virt_guest symbol - Introduce AP configuration changes notifier interface to facilitate modularization of the AP bus - Add CONFIG_AP kernel configuration option to allow modularization of the AP bus - Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description and dependency and rename it to CONFIG_AP_DEBUG - Convert sprintf() and snprintf() to sysfs_emit() in CIO code - Adjust indentation of RELOCS command build step - Make crypto performance counters upward compatible - Convert make_page_secure() and gmap_make_secure() to use folio - Rework channel-utilization-block (CUB) handling in preparation of introducing additional CUBs - Use attribute groups to simplify registration, removal and extension of measurement-related channel-path sysfs attributes - Add a per-channel-path binary "ext_measurement" sysfs attribute that provides access to extended channel-path measurement data - Export measurement data for all channel-measurement-groups (CMG), not only for a specific ones. This enables support of new CMG data formats in userspace without the need for kernel changes - Add a per-channel-path sysfs attribute "speed_bps" that provides the operating speed in bits per second or 0 if the operating speed is not available - The CIO tracepoint subchannel-type field "st" is incorrectly set to the value of subchannel-enabled SCHIB "ena" field. Fix that - Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS - Consider the maximum physical address available to a DCSS segment (512GB) when memory layout is set up - Simplify the virtual memory layout setup by reducing the size of identity mapping vs vmemmap overlap - Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory. This will allow to place the kernel image next to kernel modules - Move everyting KASLR related from <asm/setup.h> to <asm/page.h> - Put virtual memory layout information into a structure to improve code generation - Currently __kaslr_offset is the kernel offset in both physical and virtual memory spaces. Uncouple these offsets to allow uncoupling of the addresses spaces - Currently the identity mapping base address is implicit and is always set to zero. Make it explicit by putting into __identity_base persistent boot variable and use it in proper context - Introduce .amode31 section start and end macros AMODE31_START and AMODE31_END - Introduce OS_INFO entries that do not reference any data in memory, but rather provide only values - Store virtual memory layout in OS_INFO. It is read out by makedumpfile, crash and other tools - Store virtual memory layout in VMCORE_INFO. It is read out by crash and other tools when /proc/kcore device is used - Create additional PT_LOAD ELF program header that covers kernel image only, so that vmcore tools could locate kernel text and data when virtual and physical memory spaces are uncoupled - Uncouple physical and virtual address spaces - Map kernel at fixed location when KASLR mode is disabled. The location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration value. - Rework deployment of kernel image for both compressed and uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel configuration value - Move .vmlinux.relocs section in front of the compressed kernel. The interim section rescue step is avoided as result - Correct modules thunk offset calculation when branch target is more than 2GB away - Kernel modules contain their own set of expoline thunks. Now that the kernel modules area is less than 4GB away from kernel expoline thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN the default if the compiler supports it - userfaultfd can insert shared zeropages into processes running VMs, but that is not allowed for s390. Fallback to allocating a fresh zeroed anonymous folio and insert that instead - Re-enable shared zeropages for non-PV and non-skeys KVM guests - Rename hex2bitmap() to ap_hex2bitmap() and export it for external use - Add ap_config sysfs attribute to provide the means for setting or displaying adapters, domains and control domains assigned to a vfio-ap mediated device in a single operation - Make vfio_ap_mdev_link_queue() ignore duplicate link requests - Add write support to ap_config sysfs attribute to allow atomic update a vfio-ap mediated device state - Document ap_config sysfs attribute - Function os_info_old_init() is expected to be called only from a regular kdump kernel. Enable it to be called from a stand-alone dump kernel - Address gcc -Warray-bounds warning and fix array size in struct os_info - s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks - Use unwinder instead of __builtin_return_address() with ftrace to prevent returning of undefined values - Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is disabled - Compile kernel with -fPIC and link with -no-pie to allow kpatch feature always succeed and drop the whole CONFIG_PIE_BUILD option-enabled code - Add missing virt_to_phys() converter for VSIE facility and crypto control blocks * tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390: Relocate vmlinux ELF data to virtual address space" KVM: s390: vsie: Use virt_to_phys for crypto control block s390: Relocate vmlinux ELF data to virtual address space s390: Compile kernel with -fPIC and link with -no-pie s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD s390/ftrace: Use unwinder instead of __builtin_return_address() s390/pci: Drop unneeded reference to CONFIG_DMI s390/os_info: Fix array size in struct os_info s390/os_info: Initialize old os_info in standalone dump kernel docs: Update s390 vfio-ap doc for ap_config sysfs attribute s390/vfio-ap: Add write support to sysfs attr ap_config s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state s390/ap: Externalize AP bus specific bitmap reading function s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests mm/userfaultfd: Do not place zeropages when zeropages are disallowed s390/expoline: Make modules use kernel expolines s390/nospec: Correct modules thunk offset calculation s390/boot: Do not rescue .vmlinux.relocs section s390/boot: Rework deployment of the kernel image ... |
||
Ilya Leoshkevich
|
68378982f0 |
s390/bpf: Emit a barrier for BPF_FETCH instructions
BPF_ATOMIC_OP() macro documentation states that "BPF_ADD | BPF_FETCH"
should be the same as atomic_fetch_add(), which is currently not the
case on s390x: the serialization instruction "bcr 14,0" is missing.
This applies to "and", "or" and "xor" variants too.
s390x is allowed to reorder stores with subsequent fetches from
different addresses, so code relying on BPF_FETCH acting as a barrier,
for example:
stw [%r0], 1
afadd [%r1], %r2
ldxw %r3, [%r4]
may be broken. Fix it by emitting "bcr 14,0".
Note that a separate serialization instruction is not needed for
BPF_XCHG and BPF_CMPXCHG, because COMPARE AND SWAP performs
serialization itself.
Fixes:
|
||
|
Linus Torvalds
|
2842076beb |
s390:
* Fix NULL pointer read on ioctl(KVM_CHECK_EXTENSION) for /dev/kvm. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZAei4UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPXEQf+I/nn4VcOA/vGVSaXYrdr5ouWkat4 bfnBc46gOcaVvHCq7rgkmxgmLCsyG5aDpSy66qoCY6pC/IKdTYHxQrqcy8xickrP vn7I80iQ4SkjFoLitgTU7+xXCMhF28F1bNhjZAxgxxfGbQvJzZYBeiDrAoS9vVUJ Hu3Jw6Qtz9gYL5BM6x8MhzjqOpGz93qT5hyH//sP977cYyNgiQgeC5nzgZy91mbu d1sRLmKcIrqw+p6CfuqVGpXqVhpk2jc7va3l9QAiUJPq5JkScQyohHeE271hCxMT R9srmlroKi2dBl/IVPPnxEtGwCYgv/J4XZ6At/BgH2ZWVnu13O6Eob+JTQ== =hdJ5 -----END PGP SIGNATURE----- Merge tag 'for-linus-6.9' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fix from Paolo Bonzini: - Fix NULL pointer read on s390 in ioctl(KVM_CHECK_EXTENSION) for /dev/kvm * tag 'for-linus-6.9' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: Check kvm pointer when testing KVM_CAP_S390_HPAGE_1M |
||
|
Masahiro Yamada
|
b1992c3772 |
kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|