Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
event_number as per the event_list for most blocks and hence seen
as an error. Add a "disable" event with event_number 0 for all blocks.
- The enable bit for each counter need not be checked before
reading the event info, and hence removed.
Fixes: 1a218d312e ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.
Fixes: 1357dfd726 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPIAOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn80gCgybzMp0YnSildFetSC8lUJTnzjQcAn3KWzb75
Zt72jxGl4ZOXHEpozG4O
=FLrK
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
Highlights:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add SEL-3350 platform driver:
- Add SEL-3350 platform driver
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
MAINTAINERS:
- Add entries for Siemens IPC modules
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next:
- Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next
Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans
Move all simatic ipc drivers to the subdirectory siemens:
- Move all simatic ipc drivers to the subdirectory siemens
asus-wmi:
- corrections to egpu safety check
- Fix support for showing middle fan RPM
- expose dGPU and CPU tunables for ROG
- support setting mini-LED mode
- add safety checks to gpu switching
- don't allow eGPU switching if eGPU not connected
- add WMI method to show if egpu connected
- support middle fan custom curves
- add support for showing middle fan RPM
- add support for showing charger mode
dell-sysman:
- Fix reference leak
doc:
- TPMI: Add debugfs documentation
hp-bioscfg:
- Update steps order list elements are evaluated
- Use kmemdup() to replace kmalloc + memcpy
- Remove duplicate use of variable in inner loop
- Change how password encoding size is evaluated
- Change how enum possible values size is evaluated
- Change how order list size is evaluated
- Change how prerequisites size is evaluated
- Replace the word HACK from source code
- Fix uninitialized variable errors
- Fix memory leaks in attribute packages
- fix error reporting in hp_add_other_attributes()
- prevent a small buffer overflow
- fix a signedness bug in hp_wmi_perform_query()
- MAINTAINERS
- Makefile
- surestart-attributes
- string-attributes
- spmobj-attributes
- passwdobj-attributes
- order-list-attributes
- int-attributes
- enum-attributes
- biosattr-interface
- bioscfg
- bioscfg-h
- Documentation
ideapad-laptop:
- Add support for keyboard backlights using KBLC ACPI symbol
leds:
- simatic-ipc-leds: default config switch to platform switch
mlx-platform:
- Add dependency on PCI to Kconfig
mlxbf-bootctl:
- Support sysfs entries for MFG fields
- Support setting the ARM boot state to "OS up"
- Support the large icmc write/read
p2sb:
- Make the Kconfig symbol hidden
platform:
- mellanox: nvsw-sn2201: change fans i2c busses.
- mellanox: mlxreg-hotplug: Extend condition for notification callback processing
- mellanox: Add initial support for PCIe based programming logic device
- mellanox: mlx-platform: Get interrupt line through ACPI
- mellanox: mlx-platform: Introduce ACPI init flow
- mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
- mellanox: mlx-platform: Add reset callback
- mellanox: Cosmetic changes
- mellanox: mlx-platform: Modify power off callback
- mellanox: mlx-platform: add support for additional CPLD
- mellanox: mlx-platform: Add reset cause attribute
- mellanox: mlx-platform: Modify health and power hotplug action
- mellanox: Modify reset causes description
- mellanox: Add field upgrade capability register
- mellanox: Add new attributes
- Explicitly include correct DT includes
platform/x86/amd/pmc:
- Fix build error with randconfig
- Move PMC driver to separate directory
platform/x86/amd/pmf:
- Fix a missing cleanup path
- Use str_on_off() helper
platform/x86/intel/tpmi:
- Add debugfs interface
- Read feature control status
platform/x86/siemens:
- simatic-ipc-batt: fix logical error for BX-59A
- simatic-ipc: fix logical error for BX-59A
- simatic-ipc-batt: fix wrong pointer pass to PTR_ERR()
- simatic-ipc-batt: add support for module BX-59A
- simatic-ipc: add new models BX-56A/BX-59A
- Kconfig: adjust help text
- simatic-ipc-batt: fix bat reading in BX_21A
simatic-ipc:
- use extra module loading for watchdog
- add auto-loading of hwmon modules
- add another model
- drop PCI runtime depends and header
- add CMOS battery monitoring
- add another model BX-21A
system76:
- Handle new KBLED ACPI methods
thinkpad_acpi:
- Switch to memdup_user_nul() helper
- use lockdep annotations
- take mutex for hotkey_mask_{set,get}
tools/power/x86/intel-speed-select:
- v1.17 release
- Change mem-frequency display name
- Prevent CPU 0 offline
- Error on CPU count exceed in request
- Support more than 8 sockets.
- Fix CPU count display
watchdog:
- simatic: Use idiomatic selection of P2SB
- simatic: add PCI dependency
- make Siemens Simatic watchdog driver default on platform
- simatic-ipc-wdt: make IO region access of one model muxed
wmi-bmof:
- Update MAINTAINERS entry
- Simplify read_bmof()
- Use device_create_bin_file()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTx720UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wHYggAgPpl4tcbqUK7S/fwVP2SzBKI+eF3
5PjO7PlMEVzyKyjHdkqoV8miMffWAGVPE+LV33Uifs5WTFjHRq2fq/Esvj9mAstG
1fCoHJ442xYkwNCUT1CCP7VsmcvV5eFXBjBantvwmIs8TyknGHwtq1h+d95evp4n
2uyQlRMmrWh/+8fjD8x5V35T0tky+4a4EX2WNLul13LlHCybGT/F2Kq456WdthjJ
zTQSL+qAMWmAiQKSEmhI3bRnFYPdpTetjiNSTlQczch8Y4qV3mJQlnkyDPX7SM9w
M2uZ4W39Ptxihx0ks/MIcuA4yrTfUX8BnhMTD29ZYCKHS7xBqW8YC5HQug==
=GaQL
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
An incorrect if statement was preventing the enablement of the egpu.
Fixes: d49f4d1a30 ("platform/x86: asus-wmi: don't allow eGPU switching if eGPU not connected")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230830022908.36264-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add dependency on PCI to avoid 'mlx-platform' compilation error in case
CONFIG_PCI is not set.
Failed on i386:
CONFIG_ACPI=y
CONFIG_ISA=y
Error In function 'mlxplat_pci_fpga_device_init':
implicit declaration of function 'pci_request_region':
6204 | err = pci_request_region(pci_dev, 0, res_name);
| ^~~~~~~~~~~~~~~~~~
| pci_request_regions
Fixes: 1316e0af2d ("platform: mellanox: mlx-platform: Introduce ACPI init flow")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230829133748.58208-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
* Improvements
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync.
- Support official HID "GOOG0016" for ChromeOS ACPI.
* Fixes
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER.
* Misc
- Update MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZOwPUBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0nSkBAKotxdetlYni+PbaoBjMQgRRLhM9GE7i
JS9UQGmzdR46AP0SGUPrqWJcjtsIYxeemVTMqOkIjihp06xLR3r1USeEBw==
=P8Uo
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Remove shutdown timeout on EC panic for offering the filesystem a
chance to sync
- Support official HID "GOOG0016" for ChromeOS ACPI
Fixes:
- Print hex string instead of using "%s" for ACPI_TYPE_BUFFER
Misc:
- Update MAINTAINERS"
* tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
platform/chrome: chromeos_acpi: support official HID GOOG0016
platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout
MAINTAINERS: update maintainers of chrome-platform
working on. This part makes the loader core code as it is practically
enabled on pretty much every baremetal machine so there's no need to
have the Kconfig items. In addition, there are cleanups which prepare
for future feature enablement.
-----BEGIN PGP SIGNATURE-----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=QXDh
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
"The first, cleanup part of the microcode loader reorg tglx has been
working on. The other part wasn't fully ready in time so it will
follow on later.
This part makes the loader core code as it is practically enabled on
pretty much every baremetal machine so there's no need to have the
Kconfig items.
In addition, there are cleanups which prepare for future feature
enablement"
* tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD
x86/microcode/intel: Remove pointless mutex
x86/microcode/intel: Remove debug code
x86/microcode: Move core specific defines to local header
x86/microcode/intel: Rename get_datasize() since its used externally
x86/microcode: Make reload_early_microcode() static
x86/microcode: Include vendor headers into microcode.h
x86/microcode/intel: Move microcode functions out of cpu/intel.c
x86/microcode: Hide the config knob
x86/mm: Remove unused microcode.h include
x86/microcode: Remove microcode_mutex
x86/microcode/AMD: Rip out static buffers
Newer Lenovo laptops seem to use the KBLC symbol to control the backlight
Add support for handling the keyboard backlight on these devices
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Link: https://lore.kernel.org/r/20230827161940.485200-1-stuart.a.hayhurst@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.
This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.
Add the missing cleanup path.
Fixes: 33c9ab5b49 ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Connector class driver only configure cable type active or passive.
Configure if the cable type is retimer or redriver with this change.
This detail will be provided as a part of cable discover mode VDO.
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Acked-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230718024703.1013367-2-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
* Introduce Time Averaged SAR (TAS) support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmToqosRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv9XQf9HDq9smbuWLvwzNjbbS31hHFLmnfhN8Zp
+Zzn47gpMCle9ahGLQyw8lcfNPWCMyqOu4sGQ6hyyuH+YXoxZryuq9QDwWo9L/b1
5Cpm4IaBYBMm0ZoOkWw2lQSzGyNrXgvCEKRVC+pYQMvr5V2aEWxT/kT4guiou9D5
OXPRFN2iqZP0Q3TKcfKWRnWn3S0Ok3kZCFuXcWkL0sgwjqP/wbAPO1XNI1IImKNM
xUd0zT4vK/layYq7i20y8blglI5kcp/aKCFEwYpQC2WPeZ3Wtl1G9PQ8eze5Gc2Q
NTw3xfr6tENIcAmYoLdBdKbUq6e6pwLwXlojlZ2beR6s7LHM30AinQ==
=2Hja
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
- Introduce Time Averaged SAR (TAS) support
* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
wifi: rtw89: mac: define register address of rx_filter to generalize code
wifi: rtw89: mac: define internal memory address for WiFi 7 chip
wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
wifi: rtw89: initialize multi-channel handling
wifi: rtw89: provide functions to configure NoA for beacon update
wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
wifi: rtw89: sar: let caller decide the center frequency to query
wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
wifi: rtw89: add function prototype for coex request duration
Fix nomenclature for USB and PCI wireless devices
wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
wifi: ath12k: Remove unused declarations
wifi: ath12k: add check max message length while scanning with extraie
...
====================
Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A mouse that uses a USB connection is called a "USB mouse" device (or
"USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi
adapter that connects to the host computer via USB is a "USB wireless"
device, not a "wireless USB" device. (The latter term more properly
refers to a defunct Wireless USB specification, which described a
technology for sending USB protocol messages over an ultra wideband
radio link.)
Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a
"PCIe wireless" device, not a "wireless PCIe" device.
Rephrase the text in the kernel source where the word ordering is
wrong.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
The P2SB is used purely as a library and all users must select it with
depends on PCI
select P2SB if X86
statement. Without this the combination of different configuration
options may lead to build failures.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230822142514.2140897-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Define the exact i2c bus (adapter number) of fans on the SN2201 system.
This will cause fan's EEPROMs be connected already from nvsw-sn2201
platform driver and not from user space after receiving udev events.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-16-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow processing of notification callback in routine
mlxreg_hotplug_device_create() in case hotplug object is configured
with action "MLXREG_HOTPLUG_DEVICE_NO_ACTION" in case no I2C parent bus
is specified.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-15-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend driver to support logic implemented by FPGA device connected
through PCIe bus.
The motivation two support new generation of Nvidia COME module
equipped with Lattice LFD2NX-40 FPGA device.
In order to support new Nvidia COME module FPGA device driver
initialization flow is modified. In case FPGA device is detected,
system resources are to be mapped to this device, otherwise system
resources are to be mapped same as it has been done before for Lattice
LPC based CPLD.
FPGA device is associated with three PCIe devices:
- PCIe-LPC bridge for main register space access.
- PCIe-I2C bridge for I2C controller access.
- PCIe-JTAG bridge for JTAG access.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-14-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for getting system interrupt line from ACPI table.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-13-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Introduce support for ACPI initialization flow - add ACPI match hook.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-12-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently driver is activated through DMI hooks.
Prepare driver to allow activation also through ACPI trigger.
Modify mlxplat_init()/mlxplat_exit() routines.
Add mlxplat_probe()/mlxplat_remove() routines and "mlxplat_driver"
structure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-11-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On L1 switches reset should include special actions against CPLD device
for performing graceful operations.
For that purpose, special PLATFORM_RESET# signal should be indicated.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-10-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix routines and labels names by s/topolgy/topology.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-9-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend platform power off callback with kernel_halt() call.
When powering off, the process involves setting a halt bit in the
register space, which is then activated after a certain delay and
power off auxiliary power. By invoking `kernel_halt()` within this
timeframe, the intention is to facilitate a clean system power-off
sequence.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-8-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend to support 5-th CPLD version, PN and minimal version registers.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-7-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend IO registers description for some system types with reset cause
attribute "reset_swb_dc_dc_pwr_fail" to indicate reset caused by switch
board DC-DC power failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-6-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Set explicitly hotplug event action for health and power signals for
L1 switch as "MLXREG_HOTPLUG_DEVICE_NO_ACTION" in order to allow
processing of notification callback even I2C parent bus is not
specified.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For system of classes VMOD0005, VMOD0010:
- remove "reset_from_comex", since this cause doesn't define specific
reason.
- add more specific reason "reset_sw_reset", which is set along with
removed "reset_from_comex".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add new register to indicate the method of FPGA/CPLD field upgrade
supported on the specific system.
Currently two masks are available:
b00 - field upgrade through LPC gateway (new method introduced to
accelerate field upgrade process).
b11 - field upgrade through CPU GPIO pins (old method).
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add new attribute:
"lid_open" - to indicate system intrusion detection.
"reset_long_pwr_pb" - to indicate that system has been reset due to
long press of power button.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch extends the mlxbf-bootctl driver's sysfs entries
to support read and write access for the manufacturing (MFG)
fields in the board-level EEPROM. The MFG fields are set
once during the board manufacturing phase, and then the MFG
fields are write-protected.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/20230821183939.3229-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
With latest commits having PMC code spread across multiple files, it would
be easier to maintain them in a separate directory under amd/pmc.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230811112116.2279419-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
rshim console does not show all entries of dmesg.
Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <shihyic@nvidia.com>
Reviewed-by: Liming Sung <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230821150627.26075-1-shihyic@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update steps how order list elements data and elements size are
evaluated.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230821144205.13529-1-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After the addition of the mid fan custom curve functionality various
incorrect behaviour was uncovered. This commit fixes these areas.
- Ensure mid fan attributes actually use the correct fan ID
- Correction to a bit mask for selecting the correct fan data
- Refactor the curve show/store functions to be cleaner and
match each others layout
Fixes: 536fce82d7 ("platform/x86: asus-wmi: add support for showing middle fan RPM")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230815014209.44903-1-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We have a common helper to represent a boolean value as "on"/"off"
string. Use it for the sake of the unified style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20230811131330.71263-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230810122012.2110410-1-ruanjinjie@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230819-lenovo_keys-v1-1-9d34eac88e0a@apitzsch.eu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <me@sidevesh.com>
Reviewed-by: Gergő Köteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/18a08a8b173.895ef3b250414.1213194126082324071@sidevesh.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename get_datasize() to intel_microcode_get_datasize() and make it an inline.
[ tglx: Make the argument typed and fix up the IFS code ]
Suggested-by: Boris Petkov <bp@alien8.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230812195727.894165745@linutronix.de
Currently vendor specific headers are included explicitly when used in
common code. Instead, include the vendor specific headers in
microcode.h, and include that in all usages.
No functional change.
Suggested-by: Boris Petkov <bp@alien8.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230812195727.776541545@linutronix.de
