Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find
the App_Settings and App_Upgrade flash segment numbers, and store them
in the scarlett2_data struct. These will be used later to implement
reset to factory defaults and firmware upgrade functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/70f0108a9cf99b69f7aa920c4bcdb0cf4bf3da98.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The *_ctl_get() functions which call scarlett2_update_*() were not
checking the return value. Fix to check the return value and pass to
the caller.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e15fae6c5 ("ALSA: usb-audio: scarlett2: Allow bit-level access to config")
Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing conversion from little-endian data to CPU-endian in
scarlett2_usb_get_meter_levels().
Fixes: 3473185f31 ("ALSA: scarlett2: Remap Level Meter values")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZYsBIE3DSKdi4YC/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Signed-off-by: Jeremie Knuesel <knuesel@gmail.com>
Suggested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211975
Link: https://lore.kernel.org/r/20231217112243.33409-1-knuesel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_add_firmware_version_ctl() may return an error, but the
return value was not being checked. Add the missing check.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 701949cc01 ("ALSA: scarlett2: Add support for reading firmware version")
Link: https://lore.kernel.org/r/ZTuKcXajVnuelBEb@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The values previously returned by the Level Meter control were passed
through from the interface without interpretation, but it has been
discovered that the order of the values matches the mux assignment
order (which is not presented to userspace). In addition, the values
for disabled mux outputs, and mux outputs which share a source are
invalid.
This patch adds a per-device meter_map[], and a dynamic
meter_level_map[] which is updated on routing changes. The meter level
map gets used by scarlett2_meter_ctl_get() to both present the values
in a standard order, and to fix up the invalid values by zeroing them
(for disabled outputs) and copying them (for mux outputs which share a
source).
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/d437ace603eff685d2e0c3d0960589d7a09dd647.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and
8 outputs, and this renumbering is hidden from the user by
line_out_remap(). By allowing higher values (representing non-analogue
outputs) to be passed to line_out_remap(), repeated code from
scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put()
can be removed.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3b70267931f5994628ab27306c73cddd17b93c8f.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 84 bytes read during initialisation step 2 were previously
ignored. This patch retrieves the firmware version from bytes 8-11,
stores it in the scarlett2_data struct, and makes it available
through a new control "Firmware Version".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e76cd80c3445769e60c95df12c4635fc8abfe5c7.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The config sets are named NO_MIXER, GEN_2, GEN_3, and CLARETT
currently. Rename NO_MIXER and GEN_3 to GEN_3A and GEN_3B respectively
as NO_MIXER is only for the smaller Gen 3 devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/19ae5eea7fc499945efa8eeda7fcd8afe73f62d9.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver was originally developed for the Focusrite Scarlett Gen 2
series. Since then Focusrite have used a similar protocol for their
Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series.
Let's call this common protocol the "Scarlett 2 Protocol" and rename
the driver to scarlett2 to not imply that it is restricted to Gen 2
series devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e1ad7f69a1e20cdb39094164504389160c1a0a0b.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
McIntosh devices supporting native DSD require the feature to be
explicitly exposed. Add a flag that fixes an issue where DSD audio was
defaulting to DSD over PCM instead of delivering raw DSD data.
Signed-off-by: Max McCarthy <mmccarthy@mcintoshlabs.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR13MB4433226005162D186A8DFF4AD6DFA@BL0PR13MB4433.namprd13.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I own an external usb Webcam, model NexiGo N930AF, which had low mic volume and
inconsistent sound quality. Video works as expected.
(snip)
[ +0.047857] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ +0.003406] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[ +0.000007] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[ +0.000004] usb 5-1: SerialNumber: 20201217011
[ +0.003900] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
[ +0.025726] usb 5-1: 3:1: cannot get usb sound sample rate freq at ep 0x86
[ +0.071482] usb 5-1: 3:2: cannot get usb sound sample rate freq at ep 0x86
[ +0.004679] usb 5-1: 3:3: cannot get usb sound sample rate freq at ep 0x86
[ +0.051607] usb 5-1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[ +0.000005] usb 5-1: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
Set up quirk cval->res to 16 for 256 levels,
Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate.
Confirmed that happened anyway later due to the backoff mechanism, after 3 failures
All audio stream on device interfaces share the same values,
apart from wMaxPacketSize and tSamFreq :
(snip)
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 8
bDelay 1 frames
wFormatTag 0x0001 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 44100
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x005c 1x 92 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioStreaming Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0x0000
(snip)
Based on the usb data about manufacturer, SPCA2281B3 is the most likely controller IC
Manufacturer does not provide link for datasheet nor detailed specs.
No way to confirm if the firmware supports any other way of getting the sample rate.
Testing patch provides consistent good sound recording quality and volume range.
(snip)
[ +0.045764] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ +0.106290] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[ +0.000006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[ +0.000004] usb 5-1: SerialNumber: 20201217011
[ +0.043700] usb 5-1: set resolution quirk: cval->res = 16
[ +0.002585] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
Signed-off-by: Christos Skevis <xristos.thes@gmail.com>
Link: https://lore.kernel.org/r/20231006155330.399393-1-xristos.thes@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It has been confirmed that all devices in the Focusrite Clarett USB
series work the same as the devices in the Clarett+ series. Add the
missing PIDs to enable support for the Clarett 2Pre and 4Pre USB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZSFB8EVTG1PK1eq/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Focusrite Clarett+ series uses the same protocol as the Scarlett
Gen 2 and Gen 3 series. This patch adds support for the Clarett+ 2Pre
and Clarett+ 4Pre similarly to the existing 8Pre support by adding
appropriate entries to the scarlett2 driver.
The Clarett 2Pre USB and 4Pre USB presumably use the same protocol as
well, so support for them can easily be added if someone can test.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZRL7qjC3tYQllT3H@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a Opencomm2 Headset is connected to a Bluetooth USB dongle,
the audio playback functions properly, but the microphone does not work.
In the dmesg logs, there are messages indicating that the init_pitch
function fails when the capture process begins.
The microphone only functions when the ep pitch control is not set.
Toggling the pitch control off bypasses the init_piatch function
and allows the microphone to work.
Signed-off-by: WhaleChang <whalechang@google.com>
Link: https://lore.kernel.org/r/20231006044852.4181022-1-whalechang@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct snd_usx2y_urb_seq.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175046.work.766-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent enablement of -Wformat-truncation leads to a false-positive
warning for mixer_scarlett_gen2.c.
For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.
Fixes: 78bd8f5126 ("ALSA: usb-audio: scarlett_gen2: Fix -Wformat-truncation warning")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919071205.10684-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver was originally developed for the Focusrite Scarlett Gen 2
series, but now also supports the Scarlett Gen 3 series, the
Clarett 8Pre USB, and the Clarett+ 8Pre. The messages output by the
driver on initialisation and error include the identifying text
"Scarlett Gen 2/3", but this is no longer accurate, and writing
"Scarlett Gen 2/3/Clarett USB/Clarett+" would be unwieldy.
Add series_name field to the scarlett2_device_entry struct so that
concise and accurate messages can be output.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3774b9d35bf1fbdd6fdad9f3f4f97e9b82ac76bf.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By moving the USB IDs from the device_info struct into
scarlett2_devices[], that will allow for devices with different
USB IDs to share the same device_info.
Tested-by: Philippe Perrot <philippe@perrot-net.fr>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/8263368e8d49e6fcebc709817bd82ab79b404468.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Early versions of this mixer driver did not work on all hardware, so
out of caution the driver was disabled by default and had to be
explicitly enabled with device_setup=1.
Since commit 764fa6e686 ("ALSA: usb-audio: scarlett2: Fix device
hang with ehci-pci") no more problems of this nature have been
reported. Therefore, enable the driver by default but provide a new
device_setup option to disable the driver in case that is needed.
- device_setup value of 0 now means "enable" rather than "disable".
- device_setup value of 1 is now ignored.
- device_setup value of 4 now means "disable".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/89600a35b40307f2766578ad1ca2f21801286b58.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The filling of card->longname can be gracefully truncated, as it's
only informative. Use scnprintf() and suppress the superfluous
compile warning with -Wformat-truncation.
Link: https://lore.kernel.org/r/20230915082802.28684-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent enablement of -Wformat-truncation leads to a false-positive
warning for mixer_scarlett_gen2.c.
For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.
Link: https://lore.kernel.org/r/20230915082802.28684-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kctl->id.name can be directly passed to snd_usb_copy_string_desc() and
if the string has been fetched the suffix can be appended with the
append_ctl_name() call.
The temporary name string becomes redundant and can be removed.
This change will also fixes the following compiler warning/error (W=1):
sound/usb/mixer.c: In function ‘parse_audio_unit’:
sound/usb/mixer.c:1972:29: error: ‘ Validity’ directive output may be truncated writing 9 bytes into a region of size between 1 and 44 [-Werror=format-truncation=]
1972 | "%s Validity", name);
| ^~~~~~~~~
In function ‘parse_clock_source_unit’,
inlined from ‘parse_audio_unit’ at sound/usb/mixer.c:2892:10:
sound/usb/mixer.c:1971:17: note: ‘snprintf’ output between 10 and 53 bytes into a destination of size 44
1971 | snprintf(kctl->id.name, sizeof(kctl->id.name),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1972 | "%s Validity", name);
| ~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow warnings in W=1")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230913093933.24564-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The allocation and initialization errors at alloc_midi_urbs() that is
called at MIDI 2.0 / UMP device are supposed to be handled at the
caller side by invoking free_midi_urbs(). However, free_midi_urbs()
loops only for ep->num_urbs entries, and since ep->num_entries wasn't
updated yet at the allocation / init error in alloc_midi_urbs(), this
entry won't be released.
The intention of free_midi_urbs() is to release the whole elements, so
change the loop size to NUM_URBS to scan over all elements for fixing
the missed releases.
Also, the call of free_midi_urbs() is missing at
snd_usb_midi_v2_open(). Although it'll be released later at
reopen/close or disconnection, it's better to release immediately at
the error path.
Fixes: ff49d1df79 ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/r/fc275ed315b9157952dcf2744ee7bdb78defdb5f.1693746347.git.christophe.jaillet@wanadoo.fr
Link: https://lore.kernel.org/r/20230905054511.20502-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB-audio driver can still submit URBs while the device is being
disconnected, and it may result in spurious error messages like:
usb 1-2: cannot submit urb (err = -19)
usb 1-2: Unable to submit urb #0: -19 at snd_usb_queue_pending_output_urbs
usb 1-2: cannot submit urb 0, error -19: no device
Although those are harmless, they are just ugly.
This patch tries to avoid spewing such error messages when the device
is already at the disconnected state. It also skips the superfluous
xfer notification, too.
Link: https://lore.kernel.org/r/20230828101924.27107-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The legacy rawmidi devices are the shadows of the main UMP devices,
hence it's better to initialize them after all UMP Endpoints are
parsed. Then, at the moment the legacy rawmidi is created, we already
know the static flag or the proper EP name string, and we can fill
those information at UMP core side instead of fiddling the attributes
at a later point.
Fixes: ec362b63c4 ("ALSA: usb-audio: Enable the legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There have been reports of USB-audio driver spewing errors at the
probe time on a few devices like Jabra and Logitech. The suggested
fix there couldn't be applied as is, unfortunately, because it'll
likely break other devices.
But, the patch suggested an interesting point: looking at the current
init code in stream.c, one may notice that it does initialize
differently from the device setup in endpoint.c. Namely, for UAC1, we
should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after
setting the interface, while the init sequence at parsing calls them
before setting the interface blindly.
This patch changes the init sequence at parsing for UAC1 (and other
devices that need a similar behavior) to be aligned with the rest of
the code, setting the interface at first. And, this fixes the
long-standing problems on a few UAC1 devices like Jabra / Logitech,
as reported, too.
Reported-and-tested-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@infinera.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230821111857.28926-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we use the embedded struct device for each PCM substreams in
struct snd_pcm. This may result in UAF when the delayed kobj release
is used; each corresponding struct device is still accessed at the
(delayed) device release, while the snd_pcm object may be already
gone.
As a workaround, detach the struct device from the snd_pcm object by
allocating via the new snd_device_alloc() helper.
A caveat is that we store the PCM substream pointer to drvdata since
the device resume and others require the access to it.
This patch is based on the fix Curtis posted initially. In this
patch, the changes are split and use the new helper function instead.
Link: https://lore.kernel.org/r/20230801171928.1460120-1-cujomalainey@chromium.org
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Embedding the ctl_dev in the snd_card object may result in UAF when
the delayed kobj release is used; at the delayed kobj release, it
still accesses the struct device itself while the card memory (that
embeds the struct device) may be already gone.
As a workaround, detach the struct device from the card object by
allocating via the new snd_device_alloc() helper. The rest are just
replacing ctl_dev access to the pointer.
This is based on the fix Curtis posted initially. In this patch, the
changes are split and use the new helper function instead.
Link: https://lore.kernel.org/r/20230801171928.1460120-1-cujomalainey@chromium.org
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ always the case for `strncpy`!
It should be noted that, in this case, the destination buffer has a
length strictly greater than the source string. Moreover, the source
string is NUL-terminated (and so is the destination) which means there
was no real bug happening here. Nonetheless, this patch would get us one
step closer to eliminating the `strncpy` API in the kernel, as its use
is too ambiguous. We need to favor less ambiguous replacements such as:
strscpy, strscpy_pad, strtomem and strtomem_pad (amongst others).
Technically, my patch yields subtly different behavior. The original
implementation with `strncpy` would fill the entire destination buffer
with null bytes [3] while `strscpy` will leave the junk, uninitialized
bytes trailing after the _mandatory_ NUL-termination. So, if somehow
`card->driver` or `card->shortname` require this NUL-padding behavior
then `strscpy_pad` should be used. My interpretation, though, is that
the aforementioned fields are just fine as NUL-terminated strings.
Please correct my assumptions if needed and I'll send in a v2.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
[3]: https://linux.die.net/man/3/strncpy
Link: https://github.com/KSPP/linux/issues/90
Link: https://lore.kernel.org/r/20230727-sound-xen-v1-1-89dd161351f1@google.com (related ALSA patch)
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230727-sound-usb-bcd2000-v1-1-0dc73684b2f0@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Maintenance patch for native DSD support.
Remove incorrect T+A device quirks. Move set of device quirks to vendor
quirks. Add set of missing device and vendor quirks.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Link: https://lore.kernel.org/r/20230726165645.404311-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Microsoft Modern Wireless Headset (appearing on the host as "Microsoft
USB Link") has a playback and a capture mixer volume/switch, but they
are fairly broken. The descriptor reports wrong dB ranges for
playback, and the capture volume/switch don't influence on the actual
recording at all. Moreover, there seem instabilities in the
connection, and at best, we should disable the runtime PM.
So this ended up with a quirk entry for:
- Correct the playback dB range;
I picked up some reasonable values but it's a guess work
- Disable the capture mixer;
it's completely useless and confuses PA/PW
- Suppress get-sample-rate, apply the delay for message handling,
and suppress the auto-suspend
The behavior of the wheel control on the headset is somehow flaky,
too, but it's an issue of HID.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1207129
Link: https://lore.kernel.org/r/20230725092057.15115-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for
HEM devices which supports native DSD. Prior to this change Linux kernel
was not enabling native DSD playback for HEM devices, and as a result,
DSD audio was being converted to PCM "on the fly". HEM devices,
when connected to the system, would only play audio in PCM format,
even if the source material was in DSD format. With the addition of new
VENDOR_FLG in the quircks.c file, the devices are now correctly
recognized, and raw DSD data is transmitted to the device,
allowing for native DSD playback.
Signed-off-by: Lukasz Tyl <ltyl@hem-e.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230614122524.30271-1-ltyl@hem-e.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As reported in the bugzilla below, the PM resume of a UAC3 device may
fail due to the incomplete power state change, stuck at D1. The
reason is that the driver expects the full D0 power state change only
at hw_params, while the normal PCM resume procedure doesn't call
hw_params.
For fixing the bug, we add the same power state update to D0 at the
prepare callback, which is certainly called by the resume procedure.
Note that, with this change, the power state change in the hw_params
becomes almost redundant, since snd_usb_hw_params() doesn't touch the
parameters (at least it tires so). But dropping it is still a bit
risky (e.g. we have the media-driver binding), so I leave the D0 power
state change in snd_usb_hw_params() as is for now.
Fixes: a0a4959eb4 ("ALSA: usb-audio: Operate UAC3 Power Domains in PCM callbacks")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217539
Link: https://lore.kernel.org/r/20230612132818.29486-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
