Parse the DT properties present in the OPP table from
_of_init_opp_table(), which is a dedicated routine for DT parsing.
Minor relocation of helpers is required for this.
It is possible now for _managed_opp() to return a partially initialized
OPP table if the OPP table is created via the helpers like
dev_pm_opp_set_supported_hw() and we need another flag to indicate if
the static OPP are already parsed or not to make sure we don't
incorrectly skip initializing the static OPPs.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This is a preparatory patch required for the next commit which will
start using OPP table's node pointer in _of_init_opp_table(), which
requires the index in order to read the OPP table's phandle.
This commit adds the index argument in the call chains in order to get
it delivered to _of_init_opp_table().
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_list needs to be protected with a lock, else we may have
simultaneous access (addition/removal) to it and that would be racy.
Extend scope of the opp_table lock to protect dev_list as well.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
dev_pm_opp_of_cpumask_add_table() creates the OPP table for all CPUs
present in the cpumask and on errors it should revert all changes it has
done.
It actually is doing a bit more than that. On errors, it tries to free
all the OPP tables, even the one it hasn't created yet. This may also
end up freeing the OPP tables which were created from separate path,
like dev_pm_opp_set_supported_hw().
Reported-and-tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table was freed, but not the individual OPPs which is done from
_dev_pm_opp_remove_table(). Fix it by calling _dev_pm_opp_remove_table()
as well.
Cc: 4.18 <stable@vger.kernel.org> # v4.18
Fixes: 3ba98324e8 ("PM / OPP: Get performance state using genpd helper")
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.
At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.
The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.
dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).
Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq || freq > old_freq.
if (freq > old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
if (ret)
It results in, no voltage update while clk rate is updated.
Example:
freq-table = {
1000MHz 1.15V
666MHZ 1.10V
333MHz 1.05V
}
boot-up-freq = 800MHz # not listed in freq-table
freq = target_freq = 1GHz
old_freq = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!)
old_freq = 1GHz
Fixes: 6a0712f6f1 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+ <stable@vger.kernel.org> # v4.6+
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP binding says:
Property: operating-points-v2
...
This can contain more than one phandle for power domain
providers that provide multiple power domains. That is, one
phandle for each power domain. If only one phandle is available,
then the same OPP table will be used for all power domains
provided by the power domain provider.
But the OPP core isn't allowing the same OPP table to be used for
multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow
that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
It should be fine to call dev_pm_opp_register_set_opp_helper() for all
possible CPUs, even if some of them share the OPP table as the caller
may not be aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_register_put_opp_helper()
the same number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_register_set_opp_helper() is called for the same OPP table,
dev_pm_opp_register_put_opp_helper() frees the resources on the very
first call made to it, assuming that the caller would be calling it
sequentially for all the CPUs. We can revisit that if that assumption is
broken in the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_set_regulators() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_regulators() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_regulators() is called for the same OPP table,
dev_pm_opp_put_regulators() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_set_prop_name() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_prop_name() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_prop_name() is called for the same OPP table,
dev_pm_opp_put_prop_name() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_set_supported_hw() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_supported_hw() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_supported_hw() is called for the same OPP table,
dev_pm_opp_put_supported_hw() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Smatch complains that it's possible we print "rate" in the debug output
when it hasn't been initialized. It should be zero on that path.
Fixes: a1e8c13600 ("PM / OPP: "opp-hz" is optional for power domains")
[ Viresh: Added the Fixes tag ]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The genpd core provides an API now to retrieve the performance state
from DT, use that instead of the ->get_pstate() callback.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
This adds a new helper to let the power domain drivers to access
opp->np, so that they can read platform specific properties from the
node.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
A device's DT node or its OPP nodes can contain a phandle to other
device's OPP node, in the "required-opps" property.
This patch implements a routine to find that required OPP from the node
that contains the "required-opps" property.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
The "operating-points-v2" property can contain a list of phandles now,
specifically for the power domain providers that provide multiple
domains.
Add support to parse that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
"opp-hz" property is optional for power domains now and we shouldn't
error out if it is missing for power domains.
This patch creates two new routines, _get_opp_count() and
_opp_is_duplicate(), by separating existing code from their parent
functions. Also skip duplicate OPP check for power domain OPPs as they
may not have any the "opp-hz" field, but a platform specific performance
state binding to uniquely identify OPP nodes.
By default the debugfs OPP nodes are named using the "rate" value, but
that isn't possible for the power domain OPP nodes and hence they use
the index of the OPP node in the OPP node list instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
After checking all possible call chains to
dev_pm_opp_init_cpufreq_table() here,
my tool finds that this function is never called in atomic context,
namely never in an interrupt handler or holding a spinlock.
And dev_pm_opp_init_cpufreq_table() calls dev_pm_opp_get_opp_count(),
which calls mutex_lock that can sleep.
It indicates that atmtcp_v_send() can call functions which may sleep.
Thus GFP_ATOMIC is not necessary, and it can be replaced with GFP_KERNEL.
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes the following sparse warning:
drivers/opp/ti-opp-supply.c:276:5: warning:
symbol 'ti_opp_supply_set_opp' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a ti-opp-supply driver that will use new multiple regulator
support that is part of the OPP core This is needed on TI platforms like
DRA7/AM57 in order to control both CPU regulator and Adaptive Body Bias
(ABB) regulator. These regulators must be scaled in sequence during an
OPP transition depending on whether or not the frequency is being scaled
up or down.
This driver also implements AVS Class0 for these parts by looking up the
required values from registers in the SoC and programming adjusted
optimal voltage values for each OPP.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This adds the dev_pm_opp_{un}register_get_pstate_helper() helper
routines which will be used to set the get_pstate() callback for a
device. This callback will be later called internally by the OPP core to
get performance state corresponding to an OPP.
This is required temporarily until the time we have proper DT bindings
to include the performance state information.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The genpd framework now provides an API to request device's power
domain to update its performance state. Use that interface from the
OPP core for devices whose power domains support performance states.
Note that this commit doesn't add any mechanism by which performance
states are made available to the OPP core. That would be done by a
later commit.
Note that the current implementation is restricted to the case where
the device doesn't have separate regulators for itself. We shouldn't
over engineer the code before we have real use case for them. We can
always come back and add more code to support such cases later on.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 762792913f (PM / OPP: Fix get sharing CPUs when hotplug
is used) moved away from using cpu_dev->of_node because of some
limitations.
However, commit 7467c9d959 (of: return of_get_cpu_node from
of_cpu_device_node_get if CPUs are not registered) added support to
fall back to of_get_cpu_node() if called if CPUs are not registered
yet.
Add the missing of_node_put() for the CPU device nodes. Also go back
to using of_cpu_device_node_get() in dev_pm_opp_of_get_sharing_cpus()
to avoid scanning the device tree again.
Acked-by: Viresh Kumar <vireshk@kernel.org>
Fixes: 762792913f (PM / OPP: Fix get sharing CPUs when hotplug is used)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The routine is named incorrectly since the first attempt as there is
nothing like a put_opp() helper. We wanted to unregister the set_opp()
helper here and so it should rather be named as
dev_pm_opp_unregister_set_opp_helper().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The for_each_available_child_of_node() loop in _of_add_opp_table_v2()
doesn't drop the reference to "np" on errors. Fix that.
Fixes: 274659029c (PM / OPP: Add support to parse "operating-points-v2" bindings)
Cc: 4.3+ <stable@vger.kernel.org> # 4.3+
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
[ VK: Improved commit log. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some i.MX6 platforms which do not have speed grading
check, opp table will not be created in platform code,
so cpufreq driver prints the following error message:
cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
However, this is not really an error in this case because the
imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count()
and if it fails, it means that platform code does not provide
OPP and then dev_pm_opp_of_add_table() will be called.
In order to avoid such confusing error message, move it to
debug level.
It is up to the caller of dev_pm_opp_get_opp_count() to check its
return value and decide if it will print an error or not.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The drivers/base/power/ directory is special and contains code related
to power management core like system suspend/resume, hibernation, etc.
It was fine to keep the OPP code inside it when we had just one file for
it, but it is growing now and already has a directory for itself.
Lets move it directly under drivers/ directory, just like cpufreq and
cpuidle.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
