Commit Graph

744 Commits

Author SHA1 Message Date
Wang Shilong
58d86a50ee ext4: update comments regarding ext4_delete_inode()
ext4_delete_inode() has been renamed for a long time, update
comments for this.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 16:17:29 -05:00
Jan Kara
b0dea4c165 ext4: move handling of list of shrinkable inodes into extent status code
Currently callers adding extents to extent status tree were responsible
for adding the inode to the list of inodes with freeable extents. This
is error prone and puts list handling in unnecessarily many places.

Just add inode to the list automatically when the first non-delay extent
is added to the tree and remove inode from the list when the last
non-delay extent is removed.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:49:25 -05:00
Zheng Liu
edaa53cac8 ext4: change LRU to round-robin in extent status tree shrinker
In this commit we discard the lru algorithm for inodes with extent
status tree because it takes significant effort to maintain a lru list
in extent status tree shrinker and the shrinker can take a long time to
scan this lru list in order to reclaim some objects.

We replace the lru ordering with a simple round-robin.  After that we
never need to keep a lru list.  That means that the list needn't be
sorted if the shrinker can not reclaim any objects in the first round.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:45:37 -05:00
Zheng Liu
2f8e0a7c6c ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
Currently extent status tree doesn't cache extent hole when a write
looks up in extent tree to make sure whether a block has been allocated
or not.  In this case, we don't put extent hole in extent cache because
later this extent might be removed and a new delayed extent might be
added back.  But it will cause a defect when we do a lot of writes.  If
we don't put extent hole in extent cache, the following writes also need
to access extent tree to look at whether or not a block has been
allocated.  It brings a cache miss.  This commit fixes this defect.
Also if the inode doesn't have any extent, this extent hole will be
cached as well.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:44:37 -05:00
Jan Kara
cbd7584e6e ext4: fix block reservation for bigalloc filesystems
For bigalloc filesystems we have to check whether newly requested inode
block isn't already part of a cluster for which we already have delayed
allocation reservation. This check happens in ext4_ext_map_blocks() and
that function sets EXT4_MAP_FROM_CLUSTER if that's the case. However if
ext4_da_map_blocks() finds in extent cache information about the block,
we don't call into ext4_ext_map_blocks() and thus we always end up
getting new reservation even if the space for cluster is already
reserved. This results in overreservation and premature ENOSPC reports.

Fix the problem by checking for existing cluster reservation already in
ext4_da_map_blocks(). That simplifies the logic and actually allows us
to get rid of the EXT4_MAP_FROM_CLUSTER flag completely.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:41:49 -05:00
Jan Kara
4f879ca687 ext4: bail early when clearing inode journal flag fails
When clearing inode journal flag, we call jbd2_journal_flush() to force
all the journalled data to their final locations. Currently we ignore
when this fails and continue clearing inode journal flag. This isn't a
big problem because when jbd2_journal_flush() fails, journal is likely
aborted anyway. But it can still lead to somewhat confusing results so
rather bail out early.

Coverity-id: 989044
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30 10:53:17 -04:00
Dmitry Monakhov
9aa5d32ba2 ext4: Replace open coded mdata csum feature to helper function
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized  csum machinery.

#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum  $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END

# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)

https://bugzilla.kernel.org/show_bug.cgi?id=82201

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-13 03:36:16 -04:00
Eric Sandeen
0ff8947fc5 ext4: fix reservation overflow in ext4_da_write_begin
Delalloc write journal reservations only reserve 1 credit,
to update the inode if necessary.  However, it may happen
once in a filesystem's lifetime that a file will cross
the 2G threshold, and require the LARGE_FILE feature to
be set in the superblock as well, if it was not set already.

This overruns the transaction reservation, and can be
demonstrated simply on any ext4 filesystem without the LARGE_FILE
feature already set:

dd if=/dev/zero of=testfile bs=1 seek=2147483646 count=1 \
	conv=notrunc of=testfile
sync
dd if=/dev/zero of=testfile bs=1 seek=2147483647 count=1 \
	conv=notrunc of=testfile

leads to:

EXT4-fs: ext4_do_update_inode:4296: aborting transaction: error 28 in __ext4_handle_dirty_super
EXT4-fs error (device loop0) in ext4_do_update_inode:4301: error 28
EXT4-fs error (device loop0) in ext4_reserve_inode_write:4757: Readonly filesystem
EXT4-fs error (device loop0) in ext4_dirty_inode:4876: error 28
EXT4-fs error (device loop0) in ext4_da_write_end:2685: error 28

Adjust the number of credits based on whether the flag is
already set, and whether the current write may extend past the
LARGE_FILE limit.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
2014-10-11 19:51:17 -04:00
Theodore Ts'o
f4bb298102 ext4: add ext4_iget_normal() which is to be used for dir tree lookups
If there is a corrupted file system which has directory entries that
point at reserved, metadata inodes, prohibit them from being used by
treating them the same way we treat Boot Loader inodes --- that is,
mark them to be bad inodes.  This prohibits them from being opened,
deleted, or modified via chmod, chown, utimes, etc.

In particular, this prevents a corrupted file system which has a
directory entry which points at the journal inode from being deleted
and its blocks released, after which point Much Hilarity Ensues.

Reported-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-05 22:56:00 -04:00
Theodore Ts'o
e2bfb088fa ext4: don't orphan or truncate the boot loader inode
The boot loader inode (inode #5) should never be visible in the
directory hierarchy, but it's possible if the file system is corrupted
that there will be a directory entry that points at inode #5.  In
order to avoid accidentally trashing it, when such a directory inode
is opened, the inode will be marked as a bad inode, so that it's not
possible to modify (or read) the inode from userspace.

Unfortunately, when we unlink this (invalid/illegal) directory entry,
we will put the bad inode on the ophan list, and then when try to
unlink the directory, we don't actually remove the bad inode from the
orphan list before freeing in-memory inode structure.  This means the
in-memory orphan list is corrupted, leading to a kernel oops.

In addition, avoid truncating a bad inode in ext4_destroy_inode(),
since truncating the boot loader inode is not a smart thing to do.

Reported-by: Sami Liedes <sami.liedes@iki.fi>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-05 22:47:07 -04:00
Li Xi
bce92d566a ext4: fix return value of ext4_do_update_inode
When ext4_do_update_inode() gets error from ext4_inode_blocks_set(),
error number should be returned.

Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-10-01 22:11:06 -04:00
Jan Kara
d6320cbfc9 ext4: fix mmap data corruption when blocksize < pagesize
Use truncate_isize_extended() when hole is being created in a file so that
->page_mkwrite() will get called for the partial tail page if it is
mmaped (see the first patch in the series for details).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-01 21:49:46 -04:00
Theodore Ts'o
754cfed6bb ext4: drop the EXT4_STATE_DELALLOC_RESERVED flag
Having done a full regression test, we can now drop the
DELALLOC_RESERVED state flag.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-09-04 18:08:22 -04:00
Seunghun Lee
d91bd2c1d7 ext4: fix comments about get_blocks
get_blocks is renamed to get_block.

Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 22:15:30 -04:00
Dmitry Monakhov
ee124d2746 ext4: use ext4_update_i_disksize instead of opencoded ones
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-30 23:34:06 -04:00
Theodore Ts'o
1c2150283c ext4: convert ext4_bread() to use the ERR_PTR convention
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-29 20:52:15 -04:00
Theodore Ts'o
1056008226 ext4: convert ext4_getblk() to use the ERR_PTR convention
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-29 20:51:32 -04:00
Dmitry Monakhov
6603120e96 ext4: update i_disksize coherently with block allocation on error path
In case of delalloc block i_disksize may be less than i_size. So we
have to update i_disksize each time we allocated and submitted some
blocks beyond i_disksize.  We weren't doing this on the error paths,
so fix this.

testcase: xfstest generic/019

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-08-28 22:20:41 -04:00
Dmitry Monakhov
4631dbf677 ext4: move i_size,i_disksize update routines to helper function
Cc: stable@vger.kernel.org # needed for bug fix patches
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-23 17:48:28 -04:00
Lukas Czerner
4f579ae7de ext4: fix punch hole on files with indirect mapping
Currently punch hole code on files with direct/indirect mapping has some
problems which may lead to a data loss. For example (from Jan Kara):

fallocate -n -p 10240000 4096

will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096.

Also the code is a bit weird and it's not using infrastructure provided
by indirect.c, but rather creating it's own way.

This patch fixes the issues as well as making the operation to run 4
times faster from my testing (punching out 60GB file). It uses similar
approach used in ext4_ind_truncate() which takes advantage of
ext4_free_branches() function.

Also rename the ext4_free_hole_blocks() to something more sensible, like
the equivalent we have for extent mapped files. Call it
ext4_ind_remove_space().

This has been tested mostly with fsx and some xfstests which are testing
punch hole but does not require unwritten extents which are not
supported with direct/indirect mapping. Not problems showed up even with
1024k block size.

CC: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-07-15 06:03:38 -04:00
Theodore Ts'o
71d4f7d032 ext4: remove metadata reservation checks
Commit 27dd438542 ("ext4: introduce reserved space") reserves 2% of
the file system space to make sure metadata allocations will always
succeed.  Given that, tracking the reservation of metadata blocks is
no longer necessary.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-07-15 06:02:38 -04:00
Linus Torvalds
16b9057804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...
2014-06-12 10:30:18 -07:00
Zheng Liu
bd9db175dd ext4: handle symlink properly with inline_data
This commit tries to fix a bug that we can't read symlink properly with
inline data feature when the length of symlink is greater than 60 bytes
but less than extra space.

The key issue is in ext4_inode_is_fast_symlink() that it doesn't check
whether or not an inode has inline data.  When the user creates a new
symlink, an inode will be allocated with MAY_INLINE_DATA flag.  Then
symlink will be stored in ->i_block and extended attribute space.  In
the mean time, this inode is with inline data flag.  After remounting
it, ext4_inode_is_fast_symlink() function thinks that this inode is a
fast symlink so that the data in ->i_block is copied to the user, and
the data in extra space is trimmed.  In fact this inode should be as a
normal symlink.

The following script can hit this bug.

  #!/bin/bash

  cd ${MNT}
  filename=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789
  rm -rf test
  mkdir test
  cd test
  echo "hello" >$filename
  ln -s $filename symlinkfile
  cd
  sudo umount /mnt/sda1
  sudo mount -t ext4 /dev/sda1 /mnt/sda1
  readlink /mnt/sda1/test/symlinkfile

After applying this patch, it will break the assumption in e2fsck
because the original implementation doesn't want to support symlink
with inline data.

Reported-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Reported-by: Ian Nartowicz <claws@nartowicz.co.uk>
Cc: Ian Nartowicz <claws@nartowicz.co.uk>
Cc: Tao Ma <tm@tao.ma>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-06-02 10:48:22 -04:00
liang xie
5d60125530 ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
Make them more consistently

Signed-off-by: xieliang <xieliang@xiaomi.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
Lukas Czerner
c8b459f492 ext4: remove unnecessary double parentheses
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 12:55:07 -04:00
Stephen Hemminger
c197855ea1 ext4: make local functions static
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 10:50:23 -04:00
Namjae Jeon
1c8349a171 ext4: fix data integrity sync in ordered mode
When we perform a data integrity sync we tag all the dirty pages with
PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages.  Later we check
for this tag in write_cache_pages_da and creates a struct
mpage_da_data containing contiguously indexed pages tagged with this
tag and sync these pages with a call to mpage_da_map_and_submit.  This
process is done in while loop until all the PAGECACHE_TAG_TOWRITE
pages are synced. We also do journal start and stop in each iteration.
journal_stop could initiate journal commit which would call
ext4_writepage which in turn will call ext4_bio_write_page even for
delayed OR unwritten buffers. When ext4_bio_write_page is called for
such buffers, even though it does not sync them but it clears the
PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages
are also not synced by the currently running data integrity sync. We
will end up with dirty pages although sync is completed.

This could cause a potential data loss when the sync call is followed
by a truncate_pagecache call, which is exactly the case in
collapse_range.  (It will cause generic/127 failure in xfstests)

To avoid this issue, we can use set_page_writeback_keepwrite instead of
set_page_writeback, which doesn't clear TOWRITE tag.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-05-12 08:12:25 -04:00
Al Viro
a832475488 Merge ext4 changes in ext4_file_write() into for-next
From ext4.git#dev, needed for switch of ext4 to ->write_iter() ;-/
2014-05-06 17:38:41 -04:00
Al Viro
31b140398c switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:46 -04:00
Al Viro
a6cbcd4a4a get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro
16b1f05d7f ext4: switch the guts of ->direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro
d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Theodore Ts'o
202ee5df38 ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode
To avoid potential data races, use a spinlock which protects the raw
(on-disk) inode.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-04-21 14:37:55 -04:00
Lukas Czerner
556615dcbf ext4: rename uninitialized extents to unwritten
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.

The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.

This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.

This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-20 23:45:47 -04:00
Lukas Czerner
090f32ee4e ext4: get rid of EXT4_MAP_UNINIT flag
Currently EXT4_MAP_UNINIT is used in dioread_nolock case to mark the
cases where we're using dioread_nolock and we're writing into either
unallocated, or unwritten extent, because we need to make sure that
any DIO write into that inode will wait for the extent conversion.

However EXT4_MAP_UNINIT is not only entirely misleading name but also
unnecessary because we can check for EXT4_MAP_UNWRITTEN in the
dioread_nolock case instead.

This commit removes EXT4_MAP_UNINIT flag.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-20 23:44:47 -04:00
Lukas Czerner
ef24f6c234 ext4: discard preallocations after removing space
Currently in ext4_collapse_range() and ext4_punch_hole() we're
discarding preallocation twice. Once before we attempt to do any changes
and second time after we're done with the changes.

While the second call to ext4_discard_preallocations() in
ext4_punch_hole() case is not needed, we need to discard preallocation
right after ext4_ext_remove_space() in collapse range case because in
the case we had to restart a transaction in the middle of removing space
we might have new preallocations created.

Remove unneeded ext4_discard_preallocations() ext4_punch_hole() and move
it to the better place in ext4_collapse_range()

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-18 10:50:23 -04:00
Lukas Czerner
0790b31b69 fs: disallow all fallocate operation on active swapfile
Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-12 10:05:37 -04:00
Lukas Czerner
9ef06cec7c ext4: remove unnecessary check for APPEND and IMMUTABLE
All the checks IS_APPEND and IS_IMMUTABLE for the fallocate operation on
the inode are done in vfs. No need to do this again in ext4. Remove it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-12 09:47:00 -04:00
Theodore Ts'o
622cad1325 ext4: move ext4_update_i_disksize() into mpage_map_and_submit_extent()
The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent().  Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize.  That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:

      CPU #1                                 CPU #2

   down_write(&i_data_sem)
   Modify i_disk_size
   up_write(&i_data_sem)
                                        down_write(&i_data_sem)
                                        Modify i_disk_size
                                        Copy i_disk_size to on-disk inode
                                        up_write(&i_data_sem)
   Copy i_disk_size to on-disk inode

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
2014-04-11 10:35:17 -04:00
Theodore Ts'o
87f7e41636 ext4: update PF_MEMALLOC handling in ext4_write_inode()
The special handling of PF_MEMALLOC callers in ext4_write_inode()
shouldn't be necessary as there shouldn't be any. Warn about it. Also
update comment before the function as it seems somewhat outdated.

(Changes modeled on an ext3 patch posted by Jan Kara to the linux-ext4
mailing list on Februaryt 28, 2014, which apparently never went into
the ext3 tree.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
2014-04-08 11:38:28 -04:00
Kazuya Mio
4adb6ab3e0 ext4: FIBMAP ioctl causes BUG_ON due to handle EXT_MAX_BLOCKS
When we try to get 2^32-1 block of the file which has the extent
(ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON
in ext4_ext_put_gap_in_cache().

To avoid the problem, ext4_map_blocks() needs to check the file logical block
number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot
handle 2^32-1 because the maximum file logical block number is 2^32-2.

Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid.
So ext4_map_blocks() should also return the same errno.

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-04-07 10:53:28 -04:00
Linus Torvalds
24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Johannes Weiner
91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Theodore Ts'o
00a1a053eb ext4: atomically set inode->i_flags in ext4_set_inode_flags()
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.

Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30 17:02:06 -07:00
Matthew Wilcox
e04027e887 ext4: fix comment typo
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-24 15:15:07 -04:00
Matthew Wilcox
94350ab5c3 ext4: make ext4_block_zero_page_range static
It's only called within inode.c, so make it static, remove its prototype
from ext4.h and move it above all of its callers so it doesn't need a
prototype within inode.c.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-24 15:09:16 -04:00
Theodore Ts'o
5f16f3225b ext4: atomically set inode->i_flags in ext4_set_inode_flags()
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.

Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2014-03-24 14:43:12 -04:00
Theodore Ts'o
ed3654eb98 ext4: optimize Hurd tests when reading/writing inodes
Set a in-memory superblock flag to indicate whether the file system is
designed to support the Hurd.

Also, add a sanity check to make sure the 64-bit feature is not set
for Hurd file systems, since i_file_acl_high conflicts with a
Hurd-specific field.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-24 14:09:06 -04:00
Theodore Ts'o
c4f6570605 ext4: kill i_version support for Hurd-castrated file systems
The Hurd file system uses uses the inode field which is now used for
i_version for its translator block.  This means that ext2 file systems
that are formatted for GNU Hurd can't be used to support NFSv4.  Given
that Hurd file systems don't support extents, and a huge number of
modern file system features, this is no great loss.

If we don't do this, the attempt to update the i_version field will
stomp over the translator block field, which will cause file system
corruption for Hurd file systems.  This can be replicated via:

mke2fs -t ext2 -o hurd /dev/vdc
mount -t ext4 /dev/vdc /vdc
touch /vdc/bug0000
umount /dev/vdc
e2fsck -f /dev/vdc

Addresses-Debian-Bug: #738758

Reported-By: Gabriele Giacone <1o5g4r8o@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-20 00:32:57 -04:00
Lukas Czerner
b8a8684502 ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.

It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents

This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.

Also add appropriate tracepoints.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-18 18:05:35 -04:00
Jan Kara
10542c229a ext4: Speedup WB_SYNC_ALL pass called from sync(2)
When doing filesystem wide sync, there's no need to force transaction
commit (or synchronously write inode buffer) separately for each inode
because ext4_sync_fs() takes care of forcing commit at the end (VFS
takes care of flushing buffer cache, respectively). Most of the time
this slowness doesn't manifest because previous WB_SYNC_NONE writeback
doesn't leave much to write but when there are processes aggressively
creating new files and several filesystems to sync, the sync slowness
can be noticeable. In the following test script sync(1) takes around 6
minutes when there are two ext4 filesystems mounted on a standard SATA
drive. After this patch sync takes a couple of seconds so we have about
two orders of magnitude improvement.

      function run_writers
      {
        for (( i = 0; i < 10; i++ )); do
          mkdir $1/dir$i
          for (( j = 0; j < 40000; j++ )); do
            dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
          done &
        done
      }

      for dir in "$@"; do
        run_writers $dir
      done

      sleep 40
      time sync

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-04 10:50:50 -05:00
Maxim Patlasov
e251f9bca9 ext4: avoid exposure of stale data in ext4_punch_hole()
While handling punch-hole fallocate, it's useless to truncate page cache
before removing the range from extent tree (or block map in indirect case)
because page cache can be re-populated (by read-ahead or read(2) or mmap-ed
read) immediately after truncating page cache, but before updating extent
tree (or block map). In that case the user will see stale data even after
fallocate is completed.

Until the problem of data corruption resulting from pages backed by
already freed blocks is fully resolved, the simple thing we can do now
is to add another truncation of pagecache after punch hole is done.

Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-02-20 16:58:05 -05:00
Theodore Ts'o
e861b5e9a4 ext4: avoid possible overflow in ext4_map_blocks()
The ext4_map_blocks() function returns the number of blocks which
satisfying the caller's request.  This number of blocks requested by
the caller is specified by an unsigned integer, but the return value
of ext4_map_blocks() is a signed integer (to accomodate error codes
per the kernel's standard error signalling convention).

Historically, overflows could never happen since mballoc() will refuse
to allocate more than 2048 blocks at a time (which is something we
should fix), and if the blocks were already allocated, the fact that
there would be some number of intervening metadata blocks pretty much
guaranteed that there could never be a contiguous region of data
blocks that was greater than 2**31 blocks.

However, this is now possible if there is a file system which is a bit
bigger than 8TB, and is created using the new mke2fs hugeblock
feature, which can create a perfectly contiguous file.  In that case,
if a userspace program attempted to call fallocate() on this already
fully allocated file, it's possible that ext4_map_blocks() could
return a number large enough that it would overflow a signed integer,
resulting in a ext4 thinking that the ext4_map_blocks() call had
failed with some strange error code.

Since ext4_map_blocks() is always free to return a smaller number of
blocks than what was requested by the caller, fix this by capping the
number of blocks that ext4_map_blocks() will ever try to map to 2**31
- 1.  In practice this should never get hit, except by someone
deliberately trying to provke the above-described bug.

Thanks to the PaX team for asking whethre this could possibly happen
in some off-line discussions about using some static code checking
technology they are developing to find bugs in kernel code.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-20 12:54:05 -05:00
Linus Torvalds
a53b75b37a Bug fixes and cleanups for ext4. We also enable the punch hole
functionality for bigalloc file systems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJS59knAAoJENNvdpvBGATwdPMQAOqi3O7DdDKt6wUkv6LnYSH5
 y5MpvsKlvAL9WmS9Uj/S9VnG0eIakLbdl1DcTrnsqgbCryHPlWC8jOsPn22yanlN
 T+QGfw+1CkPrionsQVzKH17sFImITrcvz9z0vaX9//imSRmhm8JHMgVaboKnMXK2
 pdYdwNUGPlG4sUiaZEgX2lD4q57MUYRmGBracTRA4rC7roxRrZRv4MpRe3vdqC9D
 RNkUfrv6Bv63JsMVYAMzanMCH0IB+96ZhoRAym82H1U7nyAMvDKFWASf8dHbOXDu
 64RQlB55Ehqv4wAJ2JBwkH1vi6NIF/LEysfmksctMRDB+rP6i6HSQMOQ3SsjDUWL
 Llq6J6raeyfHa0sCDh5A4hQhtOFMuhhbqHWFcfoUgGTI3aSnt7zGuh7/afIw++Go
 tLzqJFRzCgGdnmihLRbjIy9d6eUeEj2m40bg/QOg89Y3EhTsq0kwVf0TXAOskvx4
 kBWH4ZFemfUxfDMNIa9uPN99I4/FlBO/9xGneDb6vYtPB/fA3jnaPYu/LIorF6Sc
 Mw1wH4Qy3oX5j9VcJlvZPY5cGmBLNyQqEdbOBgi6zeEFF1g2kTMf1PQQ++9rcLlV
 Cf9qc4IrjAUGbwo59gQtuB8OzhNxkl4mhOTVNZ/PW8G2rpufdqGhndUsjTAPNmKM
 +tf+CjdJuHzPnj7Ig21u
 =ofDv
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 update from Ted Ts'o:
 "Bug fixes and cleanups for ext4.  We also enable the punch hole
  functionality for bigalloc file systems"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: delete "set but not used" variables
  ext4: don't pass freed handle to ext4_walk_page_buffers
  ext4: avoid clearing beyond i_blocks when truncating an inline data file
  ext4: ext4_inode_is_fast_symlink should use EXT4_CLUSTER_SIZE
  ext4: fix a typo in extents.c
  ext4: use %pd printk specificer
  ext4: standardize error handling in ext4_da_write_inline_data_begin()
  ext4: retry allocation when inline->extent conversion failed
  ext4: enable punch hole for bigalloc
2014-01-28 08:54:16 -08:00
Linus Torvalds
bf3d846b78 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Assorted stuff; the biggest pile here is Christoph's ACL series.  Plus
  assorted cleanups and fixes all over the place...

  There will be another pile later this week"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
  __dentry_path() fixes
  vfs: Remove second variable named error in __dentry_path
  vfs: Is mounted should be testing mnt_ns for NULL or error.
  Fix race when checking i_size on direct i/o read
  hfsplus: remove can_set_xattr
  nfsd: use get_acl and ->set_acl
  fs: remove generic_acl
  nfs: use generic posix ACL infrastructure for v3 Posix ACLs
  gfs2: use generic posix ACL infrastructure
  jfs: use generic posix ACL infrastructure
  xfs: use generic posix ACL infrastructure
  reiserfs: use generic posix ACL infrastructure
  ocfs2: use generic posix ACL infrastructure
  jffs2: use generic posix ACL infrastructure
  hfsplus: use generic posix ACL infrastructure
  f2fs: use generic posix ACL infrastructure
  ext2/3/4: use generic posix ACL infrastructure
  btrfs: use generic posix ACL infrastructure
  fs: make posix_acl_create more useful
  fs: make posix_acl_chmod more useful
  ...
2014-01-28 08:38:04 -08:00
Christoph Hellwig
64e178a711 ext2/3/4: use generic posix ACL infrastructure
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25 23:58:19 -05:00
Linus Torvalds
1d32bdafaa xfs: update for v3.14-rc1
For 3.14-rc1 there are fixes in the areas of remote attributes, discard,
 growfs, memory leaks in recovery, directory v2, quotas, the MAINTAINERS
 file, allocation alignment, extent list locking, and in
 xfs_bmapi_allocate.  There are cleanups in xfs_setsize_buftarg, removing
 unused macros, quotas, setattr, and freeing of inode clusters.  The
 in-memory and on-disk log format have been decoupled, a common helper to
 calculate the number of blocks in an inode cluster has been added, and
 handling of i_version has been pulled into the filesystems that use it.
 
 - cleanup in xfs_setsize_buftarg
 - removal of remaining unused flags for vop toss/flush/flushinval
 - fix for memory corruption in xfs_attrlist_by_handle
 - fix for out-of-date comment in xfs_trans_dqlockedjoin
 - fix for discard if range length is less than one block
 - fix for overrun of agfl buffer using growfs on v4 superblock filesystems
 - pull i_version handling out into the filesystems that use it
 - don't leak recovery items on error
 - fix for memory leak in xfs_dir2_node_removename
 - several cleanups for quotas
 - fix bad assertion in xfs_qm_vop_create_dqattach
 - cleanup for xfs_setattr_mode, and add xfs_setattr_time
 - fix quota assert in xfs_setattr_nonsize
 - fix an infinite loop when turning off group/project quota before user
   quota
 - fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
   with large directory block sizes
 - fix Dave's email address in MAINTAINERS
 - cleanup calculation of freed inode cluster blocks
 - fix alignment of initial file allocations to match filesystem geometry
 - decouple in-memory and on-disk log format
 - introduce a common helper to calculate the number of filesystem
   blocks in an inode cluster
 - fixes for extent list locking
 - fix for off-by-one in xfs_attr3_rmt_verify
 - fix for missing destroy_work_on_stack in xfs_bmapi_allocate
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4C2sAAoJENaLyazVq6ZOF/UP/A/FmscsEbgz+KHtsg1UXP+g
 EMkrD8WOOzLnm7/GhkfvmmFLQrWrrNPmiP54MPJ/rxpfDb7rV60HgS0iHm13U+IR
 0uPyk2NIQKG/Sj6FHCrgn4oh19B0tmer6lLE32UPrlNM7w/0NRm32Ms/jKz7WNvc
 9Tqw3qNdtmP7leHG8EyD1ISzqUz6FNSC+qGyOTuBQUqG24LqsmZ1qD2Nw/HEz0ir
 1YCqS+cjj8c3WaWMsdjEFdCvEIKS/sMYM+ZihATIl/5ggwtVobP7PH/4cG8Biby3
 5wvcl3/jM+xjgGDC1YMQQeSADieus6ER4aZTjCvGLn9RajQTOBjP0QZTu2OHntTI
 kD/52DfYErthGijS2qJcqXy11AaYtWQU2yTZXuMpaACIM1DDSD4NyGFP99BzbBaX
 D4BgnC+vmfpbXO37PmophkeZwAvj+9K2BBG7X+g4sLynj/BtmvFCxIyK+SLHE3hN
 kn+Pn03yTw0VGgvj0krXSllbYKE0LyLElaA6h0LejQgcOZM0W6Q8qaj+RODLitbw
 HkQNKYCOMCzbdNu8rKAfup9UPZloiMukyMdMaw1MeCgCQSQLkZVxTegmVW9gzpIh
 QJEARDaOnKB/G/CLCwbPZR09DBpg3yBt/eHjt0VnV+z2x+u9DTInAp6f013g7E/W
 gU+vnBBPY1AYI8iiDraU
 =t8nB
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs

Pull xfs update from Ben Myers:
 "This is primarily bug fixes, many of which you already have.  New
  stuff includes a series to decouple the in-memory and on-disk log
  format, helpers in the area of inode clusters, and i_version handling.

  We decided to try to use more topic branches this release, so there
  are some merge commits in there on account of that.  I'm afraid I
  didn't do a good job of putting meaningful comments in the first
  couple of merges.  Sorry about that.  I think I have the hang of it
  now.

  For 3.14-rc1 there are fixes in the areas of remote attributes,
  discard, growfs, memory leaks in recovery, directory v2, quotas, the
  MAINTAINERS file, allocation alignment, extent list locking, and in
  xfs_bmapi_allocate.  There are cleanups in xfs_setsize_buftarg,
  removing unused macros, quotas, setattr, and freeing of inode
  clusters.  The in-memory and on-disk log format have been decoupled, a
  common helper to calculate the number of blocks in an inode cluster
  has been added, and handling of i_version has been pulled into the
  filesystems that use it.

   - cleanup in xfs_setsize_buftarg
   - removal of remaining unused flags for vop toss/flush/flushinval
   - fix for memory corruption in xfs_attrlist_by_handle
   - fix for out-of-date comment in xfs_trans_dqlockedjoin
   - fix for discard if range length is less than one block
   - fix for overrun of agfl buffer using growfs on v4 superblock
     filesystems
   - pull i_version handling out into the filesystems that use it
   - don't leak recovery items on error
   - fix for memory leak in xfs_dir2_node_removename
   - several cleanups for quotas
   - fix bad assertion in xfs_qm_vop_create_dqattach
   - cleanup for xfs_setattr_mode, and add xfs_setattr_time
   - fix quota assert in xfs_setattr_nonsize
   - fix an infinite loop when turning off group/project quota before
     user quota
   - fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
     with large directory block sizes
   - fix Dave's email address in MAINTAINERS
   - cleanup calculation of freed inode cluster blocks
   - fix alignment of initial file allocations to match filesystem
     geometry
   - decouple in-memory and on-disk log format
   - introduce a common helper to calculate the number of filesystem
     blocks in an inode cluster
   - fixes for extent list locking
   - fix for off-by-one in xfs_attr3_rmt_verify
   - fix for missing destroy_work_on_stack in xfs_bmapi_allocate"

* tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs: (51 commits)
  xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  xfs: fix off-by-one error in xfs_attr3_rmt_verify
  xfs: assert that we hold the ilock for extent map access
  xfs: use xfs_ilock_attr_map_shared in xfs_attr_list_int
  xfs: use xfs_ilock_attr_map_shared in xfs_attr_get
  xfs: use xfs_ilock_data_map_shared in xfs_qm_dqiterate
  xfs: use xfs_ilock_data_map_shared in xfs_qm_dqtobp
  xfs: take the ilock around xfs_bmapi_read in xfs_zero_remaining_bytes
  xfs: reinstate the ilock in xfs_readdir
  xfs: add xfs_ilock_attr_map_shared
  xfs: rename xfs_ilock_map_shared
  xfs: remove xfs_iunlock_map_shared
  xfs: no need to lock the inode in xfs_find_handle
  xfs: use xfs_icluster_size_fsb in xfs_imap
  xfs: use xfs_icluster_size_fsb in xfs_ifree_cluster
  xfs: use xfs_icluster_size_fsb in xfs_ialloc_inode_init
  xfs: use xfs_icluster_size_fsb in xfs_bulkstat
  xfs: introduce a common helper xfs_icluster_size_fsb
  xfs: get rid of XFS_IALLOC_BLOCKS macros
  xfs: get rid of XFS_INODE_CLUSTER_SIZE macros
  ...
2014-01-23 09:16:20 -08:00
Theodore Ts'o
8c9367fd9b ext4: don't pass freed handle to ext4_walk_page_buffers
This is harmless, since ext4_walk_page_buffers only passes the handle
onto the callback function, and in this call site the function in
question, bput_one(), doesn't actually use the handle.  But there's no
point passing in an invalid handle, and it creates a Coverity warning,
so let's just clean it up.

Addresses-Coverity-Id: #1091168

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-07 13:08:03 -05:00
Yongqiang Yang
65eddb56f4 ext4: ext4_inode_is_fast_symlink should use EXT4_CLUSTER_SIZE
Can be reproduced by xfstests 62 with bigalloc and 128bit size inode.

Signed-off-by: Yongqiang Yang <yangyongqiang01@baidu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2014-01-06 14:06:18 -05:00
Zheng Liu
9cb00419fa ext4: enable punch hole for bigalloc
After applied this commit (d23142c6), ext4 has supported punch hole for
a file system with bigalloc feature.  But we forgot to enable it.  This
commit fixes it.

Cc: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-01-06 14:01:23 -05:00
Jan Kara
34cf865d54 ext4: fix deadlock when writing in ENOSPC conditions
Akira-san has been reporting rare deadlocks of his machine when running
xfstests test 269 on ext4 filesystem. The problem turned out to be in
ext4_da_reserve_metadata() and ext4_da_reserve_space() which called
ext4_should_retry_alloc() while holding i_data_sem. Since
ext4_should_retry_alloc() can force a transaction commit, this is a
lock ordering violation and leads to deadlocks.

Fix the problem by just removing the retry loops. These functions should
just report ENOSPC to the caller (e.g. ext4_da_write_begin()) and that
function must take care of retrying after dropping all necessary locks.

Reported-and-tested-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-12-18 00:44:44 -05:00
Christoph Hellwig
dff6efc326 fs: fix iversion handling
Currently notify_change directly updates i_version for size updates,
which not only is counter to how all other fields are updated through
struct iattr, but also breaks XFS, which need inode updates to happen
under its own lock, and synchronized to the structure that gets written
to the log.

Remove the update in the common code, and it to btrfs and ext4,
XFS already does a proper updaste internally and currently gets a
double update with the existing code.

IMHO this is 3.13 and -stable material and should go in through the XFS
tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-12-05 16:36:21 -06:00
Andreas Dilger
9206c56155 ext4: return non-zero st_blocks for inline data
Return a non-zero st_blocks to userspace for statfs() and friends.
Some versions of tar will assume that files with st_blocks == 0
do not contain any data and will skip reading them entirely.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-11-11 22:38:12 -05:00
Ming Lei
bbf023c74d ext4: pair trace_ext4_writepages & trace_ext4_writepages_result
Pair the two trace events to make troubeshooting writepages
easier, and it should be more convinient to write a simple script
to parse the traces.

Cc: linux-ext4@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-10-30 07:27:16 -04:00
Ming Lei
aeac589a74 ext4: fix performance regression in ext4_writepages
Commit 4e7ea81db5(ext4: restructure writeback path) introduces another
performance regression on random write:

- one more page may be added to ext4 extent in
  mpage_prepare_extent_to_map, and will be submitted for I/O so
  nr_to_write will become -1 before 'done' is set

- the worse thing is that dirty pages may still be retrieved from page
  cache after nr_to_write becomes negative, so lots of small chunks
  can be submitted to block device when page writeback is catching up
  with write path, and performance is hurted.

On one arm A15 board with sata 3.0 SSD(CPU: 1.5GHz dura core, RAM:
2GB, SATA controller: 3.0Gbps), this patch can improve below test's
result from 157MB/sec to 174MB/sec(>10%):

	dd if=/dev/zero of=./z.img bs=8K count=512K

The above test is actually prototype of block write in bonnie++
utility.

This patch makes sure no more pages than nr_to_write can be added to
extent for mapping, so that nr_to_write won't become negative.

Cc: linux-ext4@vger.kernel.org
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-10-17 18:56:16 -04:00
Jan Kara
7534e854b9 ext4: fixup kerndoc annotation of mpage_map_and_submit_extent()
Document give_up_on_write argument of mpage_map_and_submit_extent().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-10-16 08:26:08 -04:00
Linus Torvalds
be5090da4a A bug fix and performance regression fix for ext4.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABCAAGBQJSWZeNAAoJENNvdpvBGATwx6kP/2mVlKlNBXVfGUmLVP3Xb68v
 4JhBzlC3ra3TRqVkw6C6kx4fbdq0cW/mDkecmYg2s+aDnswG/94/+yRdU4kQkyne
 iqN22ZYA7CumZgJvR0Z2ptWksDRpv8H5twgdVbPtad6/2cKmjseUraPo7YZhjDCe
 O9eRCXyVII305soAddZzZUgWOWCSWpdTW5zBitKaGq5x/K//rY9UlPVSuAo+9KPZ
 vyBiKJ1R6fDbtyH7JhCdXydMPKzlAPmyqYBQGLyq2GsRsXDp/VljGci6QN0iuZ5k
 lZsxFg8q0P6/R4Pjr3DDtE0tUbPXEyMxuquh/m4b3pAXRoMMCynyLP2zy7Gc7ec0
 ek2ty+sVG06JjseqigHSmS/a+PdZgDY5xEMKhaK4X38lxRPb7apNktolXxxEt6eU
 OPZsuvma1g+lbkkCdRO5FVwMllb7cuPhuZPGyxZvmP+ON59oT5QOVsDC+55WnHNs
 Ib11PCTN93Mwhrm1YPNWVV+gWG50eLZQYJam6H4mE4knaXnba6htEhYrdNczoFH4
 lcHaJzCDJLnYVRRbKXKdLSSnyz1X9cYJBP9g5ks1iNy7/JreF7WoIAOWvZWCp432
 7NC0IOmV4Q4itiCTcSh85rGlsXU8ZA7wK5HILhp9qZmNkw30OMvihNoWoTFiWTJR
 mVCkm+isBbqMP0nhV5km
 =ZwlW
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 bugfixes from Ted Ts'o:
 "A bug fix and performance regression fix for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix memory leak in xattr
  ext4: fix performance regression in writeback of random writes
2013-10-12 12:55:15 -07:00
Jan Kara
9c12a831d7 ext4: fix performance regression in writeback of random writes
The Linux Kernel Performance project guys have reported that commit
4e7ea81db5 introduces a performance regression for the following fio
workload:

[global]
direct=0
ioengine=mmap
size=1500M
bs=4k
pre_read=1
numjobs=1
overwrite=1
loops=5
runtime=300
group_reporting
invalidate=0
directory=/mnt/
file_service_type=random:36
file_service_type=random:36

[job0]
startdelay=0
rw=randrw
filename=data0/f1:data0/f2

[job1]
startdelay=0
rw=randrw
filename=data0/f2:data0/f1
...

[job7]
startdelay=0
rw=randrw
filename=data0/f2:data0/f1

The culprit of the problem is that after the commit ext4_writepages()
are more aggressive in writing back pages. Thus we have less consecutive
dirty pages resulting in more seeking.

This increased aggressivity is caused by a bug in the condition
terminating ext4_writepages(). We start writing from the beginning of
the file even if we should have terminated ext4_writepages() because
wbc->nr_to_write <= 0.

After fixing the condition the throughput of the fio workload is about 20%
better than before writeback reorganization.

Reported-by: "Yan, Zheng" <zheng.z.yan@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-09-16 08:24:26 -04:00
Kirill A. Shutemov
7caef26767 truncate: drop 'oldsize' truncate_pagecache() parameter
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression").  Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:02 -07:00
Linus Torvalds
45d9a2220f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "Unfortunately, this merge window it'll have a be a lot of small piles -
  my fault, actually, for not keeping #for-next in anything that would
  resemble a sane shape ;-/

  This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
  cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
  components) + several long-standing patches from various folks.

  There definitely will be a lot more (starting with Miklos'
  check_submount_and_drop() series)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  direct-io: Handle O_(D)SYNC AIO
  direct-io: Implement generic deferred AIO completions
  add formats for dentry/file pathnames
  kvm eventfd: switch to fdget
  powerpc kvm: use fdget
  switch fchmod() to fdget
  switch epoll_ctl() to fdget
  switch copy_module_from_fd() to fdget
  git simplify nilfs check for busy subtree
  ibmasmfs: don't bother passing superblock when not needed
  don't pass superblock to hypfs_{mkdir,create*}
  don't pass superblock to hypfs_diag_create_files
  don't pass superblock to hypfs_vm_create_files()
  oprofile: get rid of pointless forward declarations of struct super_block
  oprofilefs_create_...() do not need superblock argument
  oprofilefs_mkdir() doesn't need superblock argument
  don't bother with passing superblock to oprofile_create_stats_files()
  oprofile: don't bother with passing superblock to ->create_files()
  don't bother passing sb to oprofile_create_files()
  coh901318: don't open-code simple_read_from_buffer()
  ...
2013-09-05 08:50:26 -07:00
Christoph Hellwig
7b7a8665ed direct-io: Implement generic deferred AIO completions
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue.  This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.

The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.

Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara.  I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.

JK: Fixed ext4 part, dynamic allocation of the workqueue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04 09:23:46 -04:00
Anatol Pomozov
70261f568f ext4: Fix misspellings using 'codespell' tool
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-08-28 14:40:12 -04:00
Dmitry Monakhov
7afe5aa59e ext4: convert write_begin methods to stable_page_writes semantics
Use wait_for_stable_page() instead of wait_on_page_writeback()

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-08-28 14:30:47 -04:00
Jan Kara
90e775b71a ext4: fix lost truncate due to race with writeback
The following race can lead to a loss of i_disksize update from truncate
thus resulting in a wrong inode size if the inode size isn't updated
again before inode is reclaimed:

ext4_setattr()				mpage_map_and_submit_extent()
  EXT4_I(inode)->i_disksize = attr->ia_size;
  ...					  ...
					  disksize = ((loff_t)mpd->first_page) << PAGE_CACHE_SHIFT
					  /* False because i_size isn't
					   * updated yet */
					  if (disksize > i_size_read(inode))
					  /* True, because i_disksize is
					   * already truncated */
					  if (disksize > EXT4_I(inode)->i_disksize)
					    /* Overwrite i_disksize
					     * update from truncate */
					    ext4_update_i_disksize()
  i_size_write(inode, attr->ia_size);

For other places updating i_disksize such race cannot happen because
i_mutex prevents these races. Writeback is the only place where we do
not hold i_mutex and we cannot grab it there because of lock ordering.

We fix the race by doing both i_disksize and i_size update in truncate
atomically under i_data_sem and in mpage_map_and_submit_extent() we move
the check against i_size under i_data_sem as well.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-08-17 10:09:31 -04:00
Jan Kara
5208386c50 ext4: simplify truncation code in ext4_setattr()
Merge conditions in ext4_setattr() handling inode size changes, also
move ext4_begin_ordered_truncate() call somewhat earlier because it
simplifies error recovery in case of failure. Also add error handling in
case i_disksize update fails.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-08-17 10:07:17 -04:00
Jan Kara
5f1132b2ba ext4: fix ext4_writepages() in presence of truncate
Inode size can arbitrarily change while writeback is in progress. When
ext4_writepages() has prepared a long extent for mapping and truncate
then reduces i_size, mpage_map_and_submit_buffers() will always map just
one buffer in a page instead of all of them due to lblk < blocks check.
So we end up not using all blocks we've allocated (thus leaking them)
and also delalloc accounting goes wrong manifesting as a warning like:

ext4_da_release_space:1333: ext4_da_release_space: ino 12, to_free 1
with only 0 reserved data blocks

Note that the problem can happen only when blocksize < pagesize because
otherwise we have only a single buffer in the page.

Fix the problem by removing the size check from the mapping loop. We
have an extent allocated so we have to use it all before checking for
i_size. We also rename add_page_bufs_to_extent() to
mpage_process_page_bufs() and make that function submit the page for IO
if all buffers (upto EOF) in it are mapped.

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-08-17 10:02:33 -04:00
Jan Kara
09930042a2 ext4: move test whether extent to map can be extended to one place
Currently the logic whether the current buffer can be added to an extent
of buffers to map is split between mpage_add_bh_to_extent() and
add_page_bufs_to_extent(). Move the whole logic to
mpage_add_bh_to_extent() which makes things a bit more straightforward
and make following i_size fixes easier.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-08-17 09:57:56 -04:00
Theodore Ts'o
3be78c7317 ext4: use unsigned int for es_status values
Don't use an unsigned long long for the es_status flags; this requires
that we pass 64-bit values around which is painful on 32-bit systems.
Instead pass the extent status flags around using the low 4 bits of an
unsigned int, and shift them into place when we are reading or writing
es_pblk.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-08-16 21:22:41 -04:00
Jan Kara
a361293f5f jbd2: Fix oops in jbd2_journal_file_inode()
Commit 0713ed0cde added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.

We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-08-16 21:19:41 -04:00
Zheng Liu
44fb851dfb ext4: add WARN_ON to check the length of allocated blocks
In commit 921f266b: ext4: add self-testing infrastructure to do a
sanity check, some sanity checks were added in map_blocks to make sure
'retval == map->m_len'.

Enable these checks by default and report any assertion failures using
ext4_warning() and WARN_ON() since they can help us to figure out some
bugs that are otherwise hard to hit.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-29 12:51:42 -04:00
Theodore Ts'o
63b999685c ext4: call ext4_es_lru_add() after handling cache miss
If there are no items in the extent status tree, ext4_es_lru_add() is
a no-op.  So it is not sufficient to call ext4_es_lru_add() before we
try to lookup an entry in the extent status tree.  We also need to
call it at the end of ext4_ext_map_blocks(), after items have been
added to the extent status tree.

This could lead to inodes with that have extent status trees but which
are not in the LRU list, which means they won't get considered for
eviction by the es_shrinker.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
2013-07-16 10:28:47 -04:00
Theodore Ts'o
bdafe42aaf ext4: fix spelling errors and a comment in extent_status tree
Replace "assertation" with "assertion" in lots and lots of debugging
messages.

Correct the comment stating when ext4_es_insert_extent() is used.  It
was no doubt tree at one point, but it is no longer true...

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
2013-07-13 00:40:31 -04:00
Jan Kara
27d7c4ed1f ext4: silence warning in ext4_writepages()
The loop in mpage_map_and_submit_extent() is guaranteed to always run
at least once since the caller of mpage_map_and_submit_extent() makes
sure map->m_len > 0. So make that explicit using do-while instead of
pure while which also silences the compiler warning about
uninitialized 'err' variable.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2013-07-05 21:57:22 -04:00
Theodore Ts'o
cb53054118 ext4: fix up error handling for mpage_map_and_submit_extent()
The function mpage_released_unused_page() must only be called once;
otherwise the kernel will BUG() when the second call to
mpage_released_unused_page() tries to unlock the pages which had been
unlocked by the first call.

Also restructure the error handling so that we only give up on writing
the dirty pages in the case of ENOSPC where retrying the allocation
won't help.  Otherwise, a transient failure, such as a kmalloc()
failure in calling ext4_map_blocks() might cause us to give up on
those pages, leading to a scary message in /var/log/messages plus data
loss.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-07-01 08:12:40 -04:00
Lukas Czerner
e1be3a928e ext4: only zero partial blocks in ext4_zero_partial_blocks()
Currently if we pass range into ext4_zero_partial_blocks() which covers
entire block we would attempt to zero it even though we should only zero
unaligned part of the block.

Fix this by checking whether the range covers the whole block skip
zeroing if so.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-01 08:12:39 -04:00
Theodore Ts'o
42c832debb ext4: check error return from ext4_write_inline_data_end()
The function ext4_write_inline_data_end() can return an error.  So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
2013-07-01 08:12:39 -04:00
jon ernst
353eefd338 ext4: delete unnecessary C statements
Comparing unsigned variable with 0 always returns false.
err = 0 is duplicated and unnecessary.

[ tytso: Also cleaned up error handling in ext4_block_zero_page_range() ]

Signed-off-by: "Jon Ernst" <jonernst07@gmx.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-01 08:12:39 -04:00
Ashish Sangwan
aeb2817a4e ext4: pass inode pointer instead of file pointer to punch hole
No need to pass file pointer when we can directly pass inode pointer.

Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-01 08:12:38 -04:00
Zheng Liu
d3922a777f ext4: improve extent cache shrink mechanism to avoid to burn CPU time
Now we maintain an proper in-order LRU list in ext4 to reclaim entries
from extent status tree when we are under heavy memory pressure.  For
keeping this order, a spin lock is used to protect this list.  But this
lock burns a lot of CPU time.  We can use the following steps to trigger
it.

  % cd /dev/shm
  % dd if=/dev/zero of=ext4-img bs=1M count=2k
  % mkfs.ext4 ext4-img
  % mount -t ext4 -o loop ext4-img /mnt
  % cd /mnt
  % for ((i=0;i<160;i++)); do truncate -s 64g $i; done
  % for ((i=0;i<160;i++)); do cp $i /dev/null &; done
  % perf record -a -g
  % perf report

This commit tries to fix this problem.  Now a new member called
i_touch_when is added into ext4_inode_info to record the last access
time for an inode.  Meanwhile we never need to keep a proper in-order
LRU list.  So this can avoid to burns some CPU time.  When we try to
reclaim some entries from extent status tree, we use list_sort() to get
a proper in-order list.  Then we traverse this list to discard some
entries.  In ext4_sb_info, we use s_es_last_sorted to record the last
time of sorting this list.  When we traverse the list, we skip the inode
that is newer than this time, and move this inode to the tail of LRU
list.  When the head of the list is newer than s_es_last_sorted, we will
sort the LRU list again.

In this commit, we break the loop if s_extent_cache_cnt == 0 because
that means that all extents in extent status tree have been reclaimed.

Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is
changed to save a local variable in these functions.

Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-01 08:12:37 -04:00
Theodore Ts'o
20970ba65d ext4: use ext4_da_writepages() for all modes
Rename ext4_da_writepages() to ext4_writepages() and use it for all
modes.  We still need to iterate over all the pages in the case of
data=journalling, but in the case of nodelalloc/data=ordered (which is
what file systems mounted using ext3 backwards compatibility will use)
this will allow us to use a much more efficient I/O submission path.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-06 14:00:46 -04:00
Jan Kara
5dc23bdd5f ext4: remove ext4_ioend_wait()
Now that we clear PageWriteback after extent conversion, there's no
need to wait for io_end processing in ext4_evict_inode().  Running
AIO/DIO keeps file reference until aio_complete() is called so
ext4_evict_inode() cannot be called.  For io_end structures resulting
from buffered IO waiting is happening because we wait for
PageWriteback in truncate_inode_pages().

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:46:12 -04:00
Jan Kara
c724585b62 ext4: don't wait for extent conversion in ext4_punch_hole()
We don't have to wait for extent conversion in ext4_punch_hole() as
buffered IO for the punched range has been flushed and waited upon
(thus all extent conversions for that range have completed).  Also we
wait for all DIO to finish using inode_dio_wait() so there cannot be
any extent conversions pending due to direct IO.

Also remove ext4_flush_unwritten_io() since it's unused now.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:44:36 -04:00
Jan Kara
a115f749c1 ext4: remove wait for unwritten extent conversion from ext4_truncate()
Since PageWriteback bit is now cleared after extents are converted
from unwritten to written ones, we have full exclusion of writeback
path from truncate (truncate_inode_pages() waits for PageWriteback
bits to get cleared on all invalidated pages).  Exclusion from DIO
path is achieved by inode_dio_wait() call in ext4_setattr().  So
there's no need to wait for extent convertion in ext4_truncate()
anymore.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:30:00 -04:00
Jan Kara
e83403959f ext4: protect extent conversion after DIO with i_dio_count
Make sure extent conversion after DIO happens while i_dio_count is
still elevated so that inode_dio_wait() waits until extent conversion
is done.  This removes the need for explicit waiting for extent
conversion in some cases.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:27:38 -04:00
Jan Kara
6b523df4fb ext4: use transaction reservation for extent conversion in ext4_end_io
Later we would like to clear PageWriteback bit only after extent
conversion from unwritten to written extents is performed.  However it
is not possible to start a transaction after PageWriteback is set
because that violates lock ordering (and is easy to deadlock).  So we
have to reserve a transaction before locking pages and sending them
for IO and later we use the transaction for extent conversion from
ext4_end_io().

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:21:11 -04:00
Jan Kara
3613d22807 ext4: remove buffer_uninit handling
There isn't any need for setting BH_Uninit on buffers anymore.  It was
only used to signal we need to mark io_end as needing extent
conversion in add_bh_to_extent() but now we can mark the io_end
directly when mapping extent.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:19:34 -04:00
Jan Kara
4e7ea81db5 ext4: restructure writeback path
There are two issues with current writeback path in ext4.  For one we
don't necessarily map complete pages when blocksize < pagesize and
thus needn't do any writeback in one iteration.  We always map some
blocks though so we will eventually finish mapping the page.  Just if
writeback races with other operations on the file, forward progress is
not really guaranteed. The second problem is that current code
structure makes it hard to associate all the bios to some range of
pages with one io_end structure so that unwritten extents can be
converted after all the bios are finished.  This will be especially
difficult later when io_end will be associated with reserved
transaction handle.

We restructure the writeback path to a relatively simple loop which
first prepares extent of pages, then maps one or more extents so that
no page is partially mapped, and once page is fully mapped it is
submitted for IO. We keep all the mapping and IO submission
information in mpage_da_data structure to somewhat reduce stack usage.
Resulting code is somewhat shorter than the old one and hopefully also
easier to read.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:17:40 -04:00
Jan Kara
fffb273997 ext4: better estimate credits needed for ext4_da_writepages()
We limit the number of blocks written in a single loop of
ext4_da_writepages() to 64 when inode uses indirect blocks.  That is
unnecessary as credit estimates for mapping logically continguous run
of blocks is rather low even for inode with indirect blocks.  So just
lift this limitation and properly calculate the number of necessary
credits.

This better credit estimate will also later allow us to always write
at least a single page in one iteration.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:01:11 -04:00
Jan Kara
fa55a0ed03 ext4: improve writepage credit estimate for files with indirect blocks
ext4_ind_trans_blocks() wrongly used 'chunk' argument to decide whether
blocks mapped are logically contiguous. That is wrong since the argument
informs whether the blocks are physically contiguous. As the blocks
mapped are always logically contiguous and that's all
ext4_ind_trans_blocks() cares about, just remove the 'chunk' argument.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:56:55 -04:00
Jan Kara
39bba40b7a ext4: stop messing with nr_to_write in ext4_da_writepages()
Writeback code got better in how it submits IO and now the number of
pages requested to be written is usually higher than original 1024.
The number is now dynamically computed based on observed throughput
and is set to be about 0.5 s worth of writeback.  E.g. on ordinary
SATA drive this ends up somewhere around 10000 as my testing shows.
So remove the unnecessary smarts from ext4_da_writepages().

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:50:24 -04:00
Jan Kara
97a851ed71 ext4: use io_end for multiple bios
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.

Bugs in ENOMEM handling found by Linux File System Verification project
(linuxtesting.org) and fixed by Alexey Khoroshilov
<khoroshilov@ispras.ru>.

CC: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 11:58:58 -04:00
Jan Kara
8af8eecc13 ext4: fix overflow when counting used blocks on 32-bit architectures
The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-31 19:39:56 -04:00
Lukas Czerner
c121ffd013 ext4: remove unused discard_partial_page_buffers
The discard_partial_page_buffers is no longer used anywhere so we can
simply remove it including the *_no_lock variant and
EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED define.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner
a87dd18ce2 ext4: use ext4_zero_partial_blocks in punch_hole
We're doing to get rid of ext4_discard_partial_page_buffers() since it is
duplicating some code and also partially duplicating work of
truncate_pagecache_range(), moreover the old implementation was much
clearer.

Now when the truncate_inode_pages_range() can handle truncating non page
aligned regions we can use this to invalidate and zero out block aligned
region of the punched out range and then use ext4_block_truncate_page()
to zero the unaligned blocks on the start and end of the range. This
will greatly simplify the punch hole code. Moreover after this commit we
can get rid of the ext4_discard_partial_page_buffers() completely.

We also introduce function ext4_prepare_punch_hole() to do come common
operations before we attempt to do the actual punch hole on
indirect or extent file which saves us some code duplication.

This has been tested on ppc64 with 1k block size with fsx and xfstests
without any problems.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner
eb3544c6fc Revert "ext4: fix fsx truncate failure"
This reverts commit 189e868fa8.

This commit reintroduces the use of ext4_block_truncate_page() in ext4
truncate operation instead of ext4_discard_partial_page_buffers().

The statement in the commit description that the truncate operation only
zero block unaligned portion of the last page is not exactly right,
since truncate_pagecache_range() also zeroes and invalidate the unaligned
portion of the page. Then there is no need to zero and unmap it once more
and ext4_block_truncate_page() was doing the right job, although we
still need to update the buffer head containing the last block, which is
exactly what ext4_block_truncate_page() is doing.

Moreover the problem described in the commit is fixed more properly with
commit

15291164b2
	jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer

This was tested on ppc64 machine with block size of 1024 bytes without
any problems.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner
0713ed0cde ext4: Call ext4_jbd2_file_inode() after zeroing block
In data=ordered mode we should call ext4_jbd2_file_inode() so that crash
after the truncate transaction has committed does not expose stall data
in the tail of the block.

Thanks Jan Kara for pointing that out.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner
d863dc3614 Revert "ext4: remove no longer used functions in inode.c"
This reverts commit ccb4d7af91.

This commit reintroduces functions ext4_block_truncate_page() and
ext4_block_zero_page_range() which has been previously removed in favour
of ext4_discard_partial_page_buffers().

In future commits we want to reintroduce those function and remove
ext4_discard_partial_page_buffers() since it is duplicating some code
and also partially duplicating work of truncate_pagecache_range(),
moreover the old implementation was much clearer.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner
ca99fdd26b ext4: use ->invalidatepage() length argument
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in all ext4 invalidatepage routines.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-21 23:25:01 -04:00
Lukas Czerner
259709b07d jbd2: change jbd2_journal_invalidatepage to accept length
invalidatepage now accepts range to invalidate and there are two file
system using jbd2 also implementing punch hole feature which can benefit
from this. We need to implement the same thing for jbd2 layer in order to
allow those file system take benefit of this functionality.

This commit adds length argument to the jbd2_journal_invalidatepage()
and updates all instances in ext4 and ocfs2.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-21 23:20:03 -04:00
Lukas Czerner
d47992f86b mm: change invalidatepage prototype to accept length
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.

Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).

This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.

We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.

Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
2013-05-21 23:17:23 -04:00
Linus Torvalds
b973425cbb Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.  Also
 included is a bug fix relating to allocating blocks after resizing an
 ext3 file system when using the ext4 file system driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRkZBlAAoJENNvdpvBGATwLYQP/iWOBs2z93WG23cqkgqvL8o6
 ZyeJdgy9dkFCArVDX5SSnGkJXZ3iqIKi5HoTKTJKfytgMzgiDAZcLsIHVv6NczwR
 UGhjgS3HEdV5tJ46E6JnpB3NLSb+rAdc5kCdlsbzU46CP+JjFiYEhxVpK7ELuM/G
 yctChbIH9FY+1OwxHccacBOaJU2ELhnH6B/8Ry/6gM2H0vfKeTNOdocOHdxvbNqg
 ooGjytMfVopMQEfVG8aXtTfy341NFJH5fAYEahCcXxeO9ta6Unj9yOu5JV2wVrTt
 39+DBsquGX6AVQsc9IxJ6YAN6ldwWN7l3huE9/AI0o/alwGsfVi5M+M/d1MMjDqf
 Fgl2EzzBpZQeKKY9UXNi4LLgYdBiILMgKDOGoRKhRb8ynSSf/JX43+24FvidEi3o
 o//J4aR+oSZfaovGAeikqyF1cumayhoNN8MINRN8igIinBiC4GjBFEl/Kl/1eAY/
 lREGcsmYPXOkVPpM72waRYlP4GwNdOg4QSEY0SGljpwluO+dYtKQjHXcv/s/xL5v
 j3GemzYVyjx4zaq1g3PxGfuD6VKFHr0T6jvzd6cHu17lnPlw9fwznHbEm9BEcXDY
 gbGx9u+a2ZTqDwYVALbeoRpf9Zz6DUCse3ts4N3rbkXUQQiBYo7tybfVopIMAukb
 CexvidDE/ryJrJJFBwoK
 =6cRD
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 update from Ted Ts'o:
 "Fixed regressions (two stability regressions and a performance
  regression) introduced during the 3.10-rc1 merge window.

  Also included is a bug fix relating to allocating blocks after
  resizing an ext3 file system when using the ext4 file system driver"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
  ext4: revert "ext4: use io_end for multiple bios"
  ext4: limit group search loop for non-extent files
  ext4: fix fio regression
2013-05-14 09:30:54 -07:00
Theodore Ts'o
a549984b8c ext4: revert "ext4: use io_end for multiple bios"
This reverts commit 4eec708d26.

Multiple users have reported crashes which is apparently caused by
this commit.  Thanks to Dmitry Monakhov for bisecting it.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
2013-05-11 19:07:42 -04:00
Kent Overstreet
a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Theodore Ts'o
0d606e2c9f ext4: fix type-widening bug in inode table readahead code
Due to a missing cast, the high 32-bits of a 64-bit block number used
when calculating the readahead block for inode tables can get lost.
This means we can end up fetching the wrong blocks for readahead for
file systems > 16TB.

Linus found this when experimenting with an enhacement to the sparse
static code checker which checks for missing widening casts before
binary "not" operators.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-23 08:59:35 -04:00
Theodore Ts'o
13fca323e9 ext4: mark metadata blocks using bh flags
This allows metadata writebacks which are issued via block device
writeback to be sent with the current write request flags.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-21 16:45:54 -04:00
Jan Kara
4eec708d26 ext4: use io_end for multiple bios
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-04-11 23:56:53 -04:00
Dmitry Monakhov
171a7f21a7 ext4: fix big-endian bug in metadata checksum calculations
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-04-09 23:56:48 -04:00
Lukas Czerner
27dd438542 ext4: introduce reserved space
Currently in ENOSPC condition when writing into unwritten space, or
punching a hole, we might need to split the extent and grow extent tree.
However since we can not allocate any new metadata blocks we'll have to
zero out unwritten part of extent or punched out part of extent, or in
the worst case return ENOSPC even though use actually does not allocate
any space.

Also in delalloc path we do reserve metadata and data blocks for the
time we're going to write out, however metadata block reservation is
very tricky especially since we expect that logical connectivity implies
physical connectivity, however that might not be the case and hence we
might end up allocating more metadata blocks than previously reserved.
So in future, metadata reservation checks should be removed since we can
not assure that we do not under reserve.

And this is where reserved space comes into the picture. When mounting
the file system we slice off a little bit of the file system space (2%
or 4096 clusters, whichever is smaller) which can be then used for the
cases mentioned above to prevent costly zeroout, or unexpected ENOSPC.

The number of reserved clusters can be set via sysfs, however it can
never be bigger than number of free clusters in the file system.

Note that this patch fixes the failure of xfstest 274 as expected.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-09 22:11:22 -04:00
Eric Whitney
5c1ff33640 ext4: fix free space estimate in ext4_nonda_switch()
Values stored in s_freeclusters_counter and s_dirtyclusters_counter
are both in cluster units.  Remove the cluster to block conversion
applied to s_freeclusters_counter causing an inflated estimate of
free space because s_dirtyclusters_counter is not similarly
converted.  Rename free_blocks and dirty_blocks to better reflect
the units these variables contain to avoid future confusion.  This
fix corrects ENOSPC failures for xfstests 127 and 231 on bigalloc
file systems.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-09 09:27:31 -04:00
Dr. Tilmann Bubeck
393d1d1d76 ext4: implementation of a new ioctl called EXT4_IOC_SWAP_BOOT
Add a new ioctl, EXT4_IOC_SWAP_BOOT which swaps i_blocks and
associated attributes (like i_blocks, i_size, i_flags, ...) from the
specified inode with inode EXT4_BOOT_LOADER_INO (#5). This is
typically used to store a boot loader in a secure part of the
filesystem, where it can't be changed by a normal user by accident.
The data blocks of the previous boot loader will be associated with
the given inode.

This usercode program is a simple example of the usage:

int main(int argc, char *argv[])
{
  int fd;
  int err;

  if ( argc != 2 ) {
    printf("usage: ext4-swap-boot-inode FILE-TO-SWAP\n");
    exit(1);
  }

  fd = open(argv[1], O_WRONLY);
  if ( fd < 0 ) {
    perror("open");
    exit(1);
  }

  err = ioctl(fd, EXT4_IOC_SWAP_BOOT);
  if ( err < 0 ) {
    perror("ioctl");
    exit(1);
  }

  close(fd);
  exit(0);
}

[ Modified by Theodore Ts'o to fix a number of bugs in the original code.]

Signed-off-by: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-08 12:54:05 -04:00
Lukas Czerner
f78ee70db4 ext4: print more info in ext4_print_free_blocks()
Additionally print i_allocated_meta_blocks information as well.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2013-04-03 23:33:30 -04:00
Theodore Ts'o
d76a3a7711 ext4/jbd2: don't wait (forever) for stale tid caused by wraparound
In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org
2013-04-03 22:02:52 -04:00
Theodore Ts'o
19b5ef6157 ext4: add mutex_is_locked() assertion to ext4_truncate()
[ Added fixup from Lukáš Czerner which only checks the assertion when
  the inode is not new and is not being freed. ]

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 21:58:52 -04:00
Theodore Ts'o
819c4920b7 ext4: refactor truncate code
Move common code in ext4_ind_truncate() and ext4_ext_truncate() into
ext4_truncate().  This saves over 60 lines of code.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 12:47:17 -04:00
Theodore Ts'o
26a4c0c6cc ext4: refactor punch hole code
Move common code in ext4_ind_punch_hole() and ext4_ext_punch_hole()
into ext4_punch_hole().  This saves over 150 lines of code.

This also fixes a potential bug when the punch_hole() code is racing
against indirect-to-extents or extents-to-indirect migation.  We are
currently using i_mutex to protect against changes to the inode flag;
specifically, the append-only, immutable, and extents inode flags.  So
we need to take i_mutex before deciding whether to use the
extents-specific or indirect-specific punch_hole code.

Also, there was a missing call to ext4_inode_block_unlocked_dio() in
the indirect punch codepath.  This was added in commit 02d262dffc
to block DIO readers racing against the punch operation in the
codepath for extent-mapped inodes, but it was missing for
indirect-block mapped inodes.  One of the advantages of refactoring
the code is that it makes such oversights much less likely.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 12:45:17 -04:00
Zheng Liu
eed4333f08 ext4: fold ext4_generic_write_end() into ext4_write_end()
After collapsing the handling of data ordered and data writeback
codepath, ext4_generic_write_end() has only one caller,
ext4_write_end().  So we fold it into ext4_write_end().

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2013-04-03 12:41:17 -04:00
Theodore Ts'o
74d553aad7 ext4: collapse handling of data=ordered and data=writeback codepaths
The only difference between how we handle data=ordered and
data=writeback is a single call to ext4_jbd2_file_inode().  Eliminate
code duplication by factoring out redundant the code paths.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2013-04-03 12:39:17 -04:00
Linus Torvalds
d3c926264a Fix a number of regression and other bugs in ext4, most of which were
relatively obscure cornercases or races that were found using
 regression tests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRSm5lAAoJENNvdpvBGATwZW8QAN7jMn7IaVCTXXblqgqba4uN
 KvLGRgK7R/n1rIhdHoxJHumwRQLTppVzjDCc8ePnWhdypzMZNuzUvs+OoCFdkDsW
 qf3CmL/p/R1oSiSzzFIs/7wGp7xBZ0l0BWZMFWd9EUg9cqoMBDA6KzcMF95fOtas
 KsjRL+BThacVldS7jyKFwE4BrpXd0Z5V9qZ6wjQPPoBx8sXF4iYA+CZVo5FUKBs8
 6I82LS1/PIYCe3IOSpCgyKXQqRzAYJANv1ndken5wW8jWT2R58e360OwZEVcpIN9
 /caov+F5OKfk4iOGq3b+vwRplNhAI2S6C4vhMbmS2GPWE8Fnr8gubyqNAIIs5R/y
 3zYHdqZESfuEF7K3QoAepiJhi3YIoRxXC1FxD7uxx7VBRhW2w8Ij5hlXhuSoh24M
 MUiXgCeIxQb+ZfUx0OHV++LSOHVccU4y7Z0X+LpXQa6tEMBuSgK6yCKsGkyr8APN
 gPMupTptgyUE3tFaCjqc7QKtmoeRAMSvzfqEyV6DlblIOe+3f/RJzRO222Xc4kxq
 D9t2tOuPoXsR+ivtS5pEcrZkE4Y2hkJbJzb7XXvfoETixYsuX6VkiPK/D68S9eRe
 VelqTM2lHPJi/3Wkle0p4pzWpEq70D8qZVp4TKLHMJCTQKpwUfopm5lvln87lc7w
 4JDORIx/ed1u8MMTJlmG
 =X3vc
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of regression and other bugs in ext4, most of which were
  relatively obscure cornercases or races that were found using
  regression tests."

* tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
  ext4: fix data=journal fast mount/umount hang
  ext4: fix ext4_evict_inode() racing against workqueue processing code
  ext4: fix memory leakage in mext_check_coverage
  ext4: use s_extent_max_zeroout_kb value as number of kb
  ext4: use atomic64_t for the per-flexbg free_clusters count
  jbd2: fix use after free in jbd2_journal_dirty_metadata()
  ext4: reserve metadata block for every delayed write
  ext4: update reserved space after the 'correction'
  ext4: do not use yield()
  ext4: remove unused variable in ext4_free_blocks()
  ext4: fix WARN_ON from ext4_releasepage()
  ext4: fix the wrong number of the allocated blocks in ext4_split_extent()
  ext4: update extent status tree after an extent is zeroed out
  ext4: fix wrong m_len value after unwritten extent conversion
  ext4: add self-testing infrastructure to do a sanity check
  ext4: avoid a potential overflow in ext4_es_can_be_merged()
  ext4: invalidate extent status tree during extent migration
  ext4: remove unnecessary wait for extent conversion in ext4_fallocate()
  ext4: add warning to ext4_convert_unwritten_extents_endio
  ext4: disable merging of uninitialized extents
  ...
2013-03-21 17:56:10 -07:00
Theodore Ts'o
2b405bfa84 ext4: fix data=journal fast mount/umount hang
In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into jbd2_log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.

Arguably we should adjust ext4_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext4_evict_inode(), and so to save a bit of CPU time, and to make the
patch much more obviously correct by inspection(tm), we'll fix it by
explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.

This can be easily replicated via: 

     mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb

------------[ cut here ]------------
WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd()
Hardware name: Bochs
JBD2: bad log_start_commit: 3005630206 3005630206 0 0
Modules linked in:
Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020
Call Trace:
 [<c015c0ef>] warn_slowpath_common+0x68/0x7d
 [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd
 [<c015c177>] warn_slowpath_fmt+0x2b/0x2f
 [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd
 [<c02b8075>] jbd2_log_start_commit+0x24/0x34
 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3
 [<c021f0ec>] evict+0x94/0x135
 [<c021f9aa>] iput+0x10a/0x110
 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce
 [<c0175284>] ? bit_waitqueue+0x50/0x50
 [<c028d23f>] ext4_put_super+0x52/0x294
 [<c020efe3>] generic_shutdown_super+0x48/0xb4
 [<c020f071>] kill_block_super+0x22/0x60
 [<c020f3e0>] deactivate_locked_super+0x22/0x49
 [<c020f5d6>] deactivate_super+0x30/0x33
 [<c0222795>] mntput_no_expire+0x107/0x10c
 [<c02233a7>] sys_umount+0x2cf/0x2e0
 [<c02233ca>] sys_oldumount+0x12/0x14
 [<c08096b8>] syscall_call+0x7/0xb
---[ end trace 6a954cc790501c1f ]---
jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
2013-03-20 09:42:11 -04:00
Theodore Ts'o
1ada47d946 ext4: fix ext4_evict_inode() racing against workqueue processing code
Commit 84c17543ab (ext4: move work from io_end to inode) triggered a
regression when running xfstest #270 when the file system is mounted
with dioread_nolock.

The problem is that after ext4_evict_inode() calls ext4_ioend_wait(),
this guarantees that last io_end structure has been freed, but it does
not guarantee that the workqueue structure, which was moved into the
inode by commit 84c17543ab, is actually finished.  Once
ext4_flush_completed_IO() calls ext4_free_io_end() on CPU #1, this
will allow ext4_ioend_wait() to return on CPU #2, at which point the
evict_inode() codepath can race against the workqueue code on CPU #1
accessing EXT4_I(inode)->i_unwritten_work to find the next item of
work to do.

Fix this by calling cancel_work_sync() in ext4_ioend_wait(), which
will be renamed ext4_ioend_shutdown(), since it is only used by
ext4_evict_inode().  Also, move the call to ext4_ioend_shutdown()
until after truncate_inode_pages() and filemap_write_and_wait() are
called, to make sure all dirty pages have been written back and
flushed from the page cache first.

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e
*pdpt = 0000000030bc3001 *pde = 0000000000000000 
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
Pid: 6, comm: kworker/u:0 Not tainted 3.8.0-rc3-00013-g84c1754-dirty #91 Bochs Bochs
EIP: 0060:[<c01dda6a>] EFLAGS: 00010046 CPU: 0
EIP is at cwq_activate_delayed_work+0x3b/0x7e
EAX: 00000000 EBX: 00000000 ECX: f505fe54 EDX: 00000000
ESI: ed5b697c EDI: 00000006 EBP: f64b7e8c ESP: f64b7e84
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 30bc2000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process kworker/u:0 (pid: 6, ti=f64b6000 task=f64b4160 task.ti=f64b6000)
Stack:
 f505fe00 00000006 f64b7e9c c01de3d7 f6435540 00000003 f64b7efc c01def1d
 f6435540 00000002 00000000 0000008a c16d0808 c040a10b c16d07d8 c16d08b0
 f505fe00 c16d0780 00000000 00000000 ee153df4 c1ce4a30 c17d0e30 00000000
Call Trace:
 [<c01de3d7>] cwq_dec_nr_in_flight+0x71/0xfb
 [<c01def1d>] process_one_work+0x5d8/0x637
 [<c040a10b>] ? ext4_end_bio+0x300/0x300
 [<c01e3105>] worker_thread+0x249/0x3ef
 [<c01ea317>] kthread+0xd8/0xeb
 [<c01e2ebc>] ? manage_workers+0x4bb/0x4bb
 [<c023a370>] ? trace_hardirqs_on+0x27/0x37
 [<c0f1b4b7>] ret_from_kernel_thread+0x1b/0x28
 [<c01ea23f>] ? __init_kthread_worker+0x71/0x71
Code: 01 83 15 ac ff 6c c1 00 31 db 89 c6 8b 00 a8 04 74 12 89 c3 30 db 83 05 b0 ff 6c c1 01 83 15 b4 ff 6c c1 00 89 f0 e8 42 ff ff ff <8b> 13 89 f0 83 05 b8 ff 6c c1
 6c c1 00 31 c9 83
EIP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e SS:ESP 0068:f64b7e84
CR2: 0000000000000000
---[ end trace a1923229da53d8a4 ]---

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
2013-03-20 09:39:42 -04:00
Lukas Czerner
386ad67c9a ext4: reserve metadata block for every delayed write
Currently we only reserve space (data+metadata) in delayed allocation if
we're allocating from new cluster (which is always in non-bigalloc file
system) which is ok for data blocks, because we reserve the whole cluster.

However we have to reserve metadata for every delayed block we're going
to write because every block could potentially require metedata block
when we need to grow the extent tree.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2013-03-10 22:50:00 -04:00
Lukas Czerner
bb8b20ed94 ext4: do not use yield()
Using yield() is strongly discouraged (see sched/core.c) especially
since we can just use cond_resched().

Replace all use of yield() with cond_resched().

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-03-10 22:28:09 -04:00
Jan Kara
e1c36595be ext4: fix WARN_ON from ext4_releasepage()
ext4_releasepage() warns when it is passed a page with PageChecked set.
However this can correctly happen when invalidate_inode_pages2_range()
invalidates pages - and we should fail the release in that case. Since
the page was dirty anyway, it won't be discarded and no harm has
happened but it's good to be safe. Also remove bogus page_has_buffers()
check - we are guaranteed page has buffers in this function.

Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Tested-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2013-03-10 22:19:00 -04:00
Zheng Liu
adb2355104 ext4: update extent status tree after an extent is zeroed out
When we try to split an extent, this extent could be zeroed out and mark
as initialized.  But we don't know this in ext4_map_blocks because it
only returns a length of allocated extent.  Meanwhile we will mark this
extent as uninitialized because we only check m_flags.

This commit update extent status tree when we try to split an unwritten
extent.  We don't need to worry about the status of this extent because
we always mark it as initialized.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
2013-03-10 21:13:05 -04:00
Dmitry Monakhov
921f266bc6 ext4: add self-testing infrastructure to do a sanity check
This commit adds a self-testing infrastructure like extent tree does to
do a sanity check for extent status tree.  After status tree is as a
extent cache, we'd better to make sure that it caches right result.

After applied this commit, we will get a lot of messages when we run
xfstests as below.

...
kernel: ES len assertation failed for inode: 230 retval 1 != map->m_len
3 in ext4_map_blocks (allocation)
...
kernel: ES cache assertation failed for inode: 230 es_cached ex
[974/2/4781/20] != found ex [974/1/4781/1000]
...
kernel: ES insert assertation failed for inode: 635 ex_status
[0/45/21388/w] != es_status [44/1/21432/u]
...

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-03-10 21:01:03 -04:00
Linus Torvalds
de1a2262b0 2 writeback fixes
- fix negative (setpoint - dirty) in 32bit archs
 - use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRLrFaAAoJECvKgwp+S8JaV2IP/jo34e3Ht0gvIfxz9rh05dvR
 LqBmSAXXJQYgxUKUjYECuyLahIciniKYZp/fS6s5myOPAayiirB70rC1W85Kz8Sm
 uR1wDvG0g1AyK39kJas+WZw2fJFicthSSp29jhTH0upbEcMX+/tzsHTsJRH1WqI0
 rtV8wHVxDu4+njz44hZIVxmJ9S7XZCuw8D6NfbyobmAqOm35j0VJ7uzQOxrNoJDe
 lvnwEGXfSU9KTfOIxt4K0d+lovXT6IRfN0qfdgcrWwxx9QJ/cU5F5b6cjdN9BsEF
 oq2UKSihbU55PdgUk6DfMJ3t7AXS/u2/P5a8PNfoNL9ovKQMJMHPXXDtxXmwCvcI
 aaYbULbwojMWZyrijViJpkftVKKtM/96X/jyCsof96UhJdah8c9wM44k1LDRBYXi
 WbQbD+doUII+pEmxUxF3Chrk/Yi3T5q2IWiVsixUEGewrSChOSqMIXOcSpgz97lL
 eGmNHgC/rn5TdDx8J3u0V+1+QYCvNxC25GG4E2+9QhU+mecLKt+IG1Dhn35xUjq1
 kjgfrNWJC6zxlIq7owk8pTI7DxiV/iMqogR5mMDz0umrPrid/J/xb6zxuAcnk3WU
 j0clNu7gzIYB8NjxBskO3Fg2AWKJxSohpu+r9wcjmjf0T5uEUmLwpI0i4tdDlYNw
 IvcmOpF1I2Ja5TrW8HWw
 =j9Sn
 -----END PGP SIGNATURE-----

Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux

Pull writeback fixes from Wu Fengguang:
 "Two writeback fixes

   - fix negative (setpoint - dirty) in 32bit archs

   - use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()"

* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  Negative (setpoint-dirty) in bdi_position_ratio()
  vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them
2013-02-28 13:21:44 -08:00
Linus Torvalds
d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Linus Torvalds
6515925b82 The one new feature added in this patch series is the ability to use
the "punch hole" functionality for inodes that are not using extent
 maps.
 
 In the bug fix category, we fixed some races in the AIO and fstrim
 code, and some potential NULL pointer dereferences and memory leaks in
 error handling code paths.
 
 In the optimization category, we fixed a performance regression in the
 jbd2 layer introduced by commit d9b0193 (introduced in v3.0) which
 shows up in the AIM7 benchmark.  We also further optimized jbd2 by
 minimize the amount of time that transaction handles are held active.
 
 This patch series also features some additional enhancement of the
 extent status tree, which is now used to cache extent information in a
 more efficient/compact form than what we use on-disk.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRLRs7AAoJENNvdpvBGATwNb8QAML+TjGtHlJ1coDUzGT2Cq9R
 yREAzI1N/+Phiohy3O0JNx55uPvYEMx6+zi+JCNSs1/gnf/OWruESTXssRbBv3Yd
 WxfOiCIaK8BbOEGZlMwGsFDCzVNKfvHxRrmyeHtcyUONKLFQUmBcE/woVPHcsvlE
 ya/zGnD2e58NaGwS643bqfvTrVt/azH0U0osNCNwfZepZmboEXK8fzT9b3Auh+1Q
 EI28m0GSRp0V0cgwOEN54EhTtocyS30GN8sbC1K5cFHK8tGLhyVwnvIonyFDI5/D
 GOkEPeRb7v2FwGpAilQ/V0jT++E//7zzyMFwvIY1U6b1dzBFCaJUuLMO1R8xoaoa
 c/Qd3AFIt1anS66qZAnW3m5rRyJgU2YA3VrKJj4q0jPKCh+k3+EqVfNTOB8BPLmC
 oCI/4ApUyHeYDdcErFjW4VDJ5N0debPP4yjma3uUtdM7RvQvMdQECnkAjIDCcGKe
 bMc7dtI9jdUYDCPGDeOjdrvk623QpE7J4Pf6iSQ5WxA4f2QmOQ8uIuGe8CPQSVtQ
 bUYjkthtWX2cX2/kHVvSYx6FzAjkgwmxCpAaiCXtGploxJIDjlWkiTXibkRYPLp4
 jBmQPK8ct8bl98k/i3mdybZnJU2TxWLA45hub0zBYs0aSgi8HzFyd+y8DiCKRS0S
 2sANbrsKG6TCzZ6C6ods
 =KSV1
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Theodore Ts'o:
 "The one new feature added in this patch series is the ability to use
  the "punch hole" functionality for inodes that are not using extent
  maps.

  In the bug fix category, we fixed some races in the AIO and fstrim
  code, and some potential NULL pointer dereferences and memory leaks in
  error handling code paths.

  In the optimization category, we fixed a performance regression in the
  jbd2 layer introduced by commit d9b01934d5 ("jbd: fix fsync() tid
  wraparound bug", introduced in v3.0) which shows up in the AIM7
  benchmark.  We also further optimized jbd2 by minimize the amount of
  time that transaction handles are held active.

  This patch series also features some additional enhancement of the
  extent status tree, which is now used to cache extent information in a
  more efficient/compact form than what we use on-disk."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (65 commits)
  ext4: fix free clusters calculation in bigalloc filesystem
  ext4: no need to remove extent if len is 0 in ext4_es_remove_extent()
  ext4: fix xattr block allocation/release with bigalloc
  ext4: reclaim extents from extent status tree
  ext4: adjust some functions for reclaiming extents from extent status tree
  ext4: remove single extent cache
  ext4: lookup block mapping in extent status tree
  ext4: track all extent status in extent status tree
  ext4: let ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
  ext4: rename and improbe ext4_es_find_extent()
  ext4: add physical block and status member into extent status tree
  ext4: refine extent status tree
  ext4: use ERR_PTR() abstraction for ext4_append()
  ext4: refactor code to read directory blocks into ext4_read_dirblock()
  ext4: add debugging context for warning in ext4_da_update_reserve_space()
  ext4: use KERN_WARNING for warning messages
  jbd2: use module parameters instead of debugfs for jbd_debug
  ext4: use module parameters instead of debugfs for mballoc_debug
  ext4: start handle at the last possible moment when creating inodes
  ext4: fix the number of credits needed for acl ops with inline data
  ...
2013-02-26 14:52:45 -08:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Darrick J. Wong
1d1d1a7672 mm: only enforce stable page writes if the backing device requires it
Create a helper function to check if a backing device requires stable
page writes and, if so, performs the necessary wait.  Then, make it so
that all points in the memory manager that handle making pages writable
use the helper function.  This should provide stable page write support
to most filesystems, while eliminating unnecessary waiting for devices
that don't require the feature.

Before this patchset, all filesystems would block, regardless of whether
or not it was necessary.  ext3 would wait, but still generate occasional
checksum errors.  The network filesystems were left to do their own
thing, so they'd wait too.

After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it.  ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait.  Network filesystems haven't been touched, so either they
provide their own stable page guarantees or they don't block at all.
The blocking behavior is back to what it was before 3.0 if you don't
have a disk requiring stable page writes.

Here's the result of using dbench to test latency on ext2:

3.8.0-rc3:
 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 WriteX        109347     0.028    59.817
 ReadX         347180     0.004     3.391
 Flush          15514    29.828   287.283

Throughput 57.429 MB/sec  4 clients  4 procs  max_latency=287.290 ms

3.8.0-rc3 + patches:
 WriteX        105556     0.029     4.273
 ReadX         335004     0.005     4.112
 Flush          14982    30.540   298.634

Throughput 55.4496 MB/sec  4 clients  4 procs  max_latency=298.650 ms

As you can see, the maximum write latency drops considerably with this
patch enabled.  The other filesystems (ext3/ext4/xfs/btrfs) behave
similarly, but see the cover letter for those results.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:19 -08:00
Zheng Liu
d100eef244 ext4: lookup block mapping in extent status tree
After tracking all extent status, we already have a extent cache in
memory.  Every time we want to lookup a block mapping, we can first
try to lookup it in extent status tree to avoid a potential disk I/O.

A new function called ext4_es_lookup_extent is defined to finish this
work.  When we try to lookup a block mapping, we always call
ext4_map_blocks and/or ext4_da_map_blocks.  So in these functions we
first try to lookup a block mapping in extent status tree.

A new flag EXT4_GET_BLOCKS_NO_PUT_HOLE is used in ext4_da_map_blocks
in order not to put a hole into extent status tree because this hole
will be converted to delayed extent in the tree immediately.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
2013-02-18 00:29:59 -05:00
Zheng Liu
f7fec032aa ext4: track all extent status in extent status tree
By recording the phycisal block and status, extent status tree is able
to track the status of every extents.  When we call _map_blocks
functions to lookup an extent or create a new written/unwritten/delayed
extent, this extent will be inserted into extent status tree.

We don't load all extents from disk in alloc_inode() because it costs
too much memory, and if a file is opened and closed frequently it will
takes too much time to load all extent information.  So currently when
we create/lookup an extent, this extent will be inserted into extent
status tree.  Hence, the extent status tree may not comprehensively
contain all of the extents found in the file.

Here a condition we need to take care is that an extent might contains
unwritten and delayed status simultaneously because an extent is delayed
allocated and could be allocated by fallocate.  At this time we need to
keep delayed status because later we need to update delayed reservation
space using it.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
2013-02-18 00:28:47 -05:00
Zheng Liu
a25a4e1a5d ext4: let ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
This commit lets ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
because in later commit ext4_map_blocks needs to use this flag to
determine the extent status.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-02-18 00:28:04 -05:00
Zheng Liu
fdc0212e86 ext4: add physical block and status member into extent status tree
This commit adds two members in extent_status structure to let it record
physical block and extent status.  Here es_pblk is used to record both
of them because physical block only has 48 bits.  So extent status could
be stashed into it so that we can save some memory.  Now written,
unwritten, delayed and hole are defined as status.

Due to new member is added into extent status tree, all interfaces need
to be adjusted.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-02-18 00:26:51 -05:00
Theodore Ts'o
0f70b40613 ext4: use ERR_PTR() abstraction for ext4_append()
Use ERR_PTR()/IS_ERR() abstraction instead of passing in a separate
pointer to an integer for the error code, as a code cleanup.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-15 03:35:57 -05:00
Theodore Ts'o
01a523eb51 ext4: add debugging context for warning in ext4_da_update_reserve_space()
Print some additional debugging context to hopefully help to debug a
warning which is getting triggered by xfstests #74.

Also remove extraneous newlines from when printk's were converted to
ext4_warning() and ext4_msg().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-14 15:51:58 -05:00
Theodore Ts'o
8de5c325b4 ext4: use KERN_WARNING for warning messages
Some messages printed related to a WARN_ON(1) were printed using
KERN_NOTICE.  Use KERN_WARNING or ext4_warning() instead so that
context related to the WARN_ON() is printed at the same printk warning
level (and log files, etc.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-14 15:11:41 -05:00
Theodore Ts'o
47564bfb95 ext4: grab page before starting transaction handle in write_begin()
The grab_cache_page_write_begin() function can potentially sleep for a
long time, since it may need to do memory allocation which can block
if the system is under significant memory pressure, and because it may
be blocked on page writeback.  If it does take a long time to grab the
page, it's better that we not hold an active jbd2 handle.

So grab a handle on the page first, and _then_ start the transaction
handle.

This commit fixes the following long transaction handle hold time:

postmark-2917  [000] ....   196.435786: jbd2_handle_stats: dev 254,32
   tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
   dirtied_blocks 0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-02-09 09:24:14 -05:00
Theodore Ts'o
9924a92a8c ext4: pass context information to jbd2__journal_start()
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.

The recommended way for finding the longer-running handles is:

   T=/sys/kernel/debug/tracing
   EVENT=$T/events/jbd2/jbd2_handle_stats
   echo "interval > 5" > $EVENT/filter
   echo 1 > $EVENT/enable

   ./run-my-fs-benchmark

   cat $T/trace > /tmp/problem-handles

This will list handles that were active for longer than 20ms.  Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation.  Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:

postmark-2917  [000] ....   196.435786: jbd2_handle_stats: dev 254,32 
   tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
   dirtied_blocks 0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
Jan Kara
091e26dfc1 ext4: fix possible use-after-free with AIO
Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

CC: stable@vger.kernel.org
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-29 22:48:17 -05:00