APM X-Gene SoC AHCI SATA Host controller driver requires
some correction of Phy Control OOB timing for the
COMINIT/COMWAKE parameters to correctly interoperate with
different kinds of disks.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As per SATA IO specification, when Host sends HOLD, the device takes
about 20DW latency to reply to HOLDA. In some case, device doesn't
response to HOLDA over 20DW and causes FIFO goes into over flow
condition. Due to this condition, device enumerations fails with
those devices. This patch adjust the watermark FIFO by increasing
the FIFO depth from 0x16(default) to 0x30 to address this issue.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
On LPAE, each level 1 (pgd) page table entry maps 1GiB, and the level 2
(pmd) entries map 2MiB.
When the identity mapping is created on LPAE, the pgd pointers are copied
from the swapper_pg_dir. If we find that we need to modify the contents
of a pmd, we allocate a new empty pmd table and insert it into the
appropriate 1GB slot, before then filling it with the identity mapping.
However, if the 1GB slot covers the kernel lowmem mappings, we obliterate
those mappings.
When replacing a PMD, first copy the old PMD contents to the new PMD, so
that we preserve the existing mappings, particularly the mappings of the
kernel itself.
[rewrote commit message and added code comment -- rmk]
Fixes: ae2de10173 ("ARM: LPAE: Add identity mapping support for the 3-level page table format")
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
enabling of twl4030 PM features. Turns out more work is needed
before we can enable twl4030 PM on n900.
I did not notice this earlier as I have my n900 in a rack
and the display did not get enabled for device tree based booting
until for v3.16.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5XAH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.16/n900-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap n900 regression fix for v3.16 rc series" from Tony Lindgren:
Minimal regression fix for n900 display that got broken with
enabling of twl4030 PM features. Turns out more work is needed
before we can enable twl4030 PM on n900.
I did not notice this earlier as I have my n900 in a rack
and the display did not get enabled for device tree based booting
until for v3.16.
* tag 'omap-for-v3.16/n900-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Revert enabling of twl configuration for n900
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If init_mm.brk is not section aligned, the LPAE fixup code will miss
updating the final PMD. Fix this by aligning map_end.
Fixes: a77e0c7b27 ("ARM: mm: Recreate kernel mappings in early_paging_init()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 9188883fd6 (ARM: dts: Enable twl4030 off-idle configuration
for selected omaps) allowed n900 to cut off core voltages during
off-idle. This however caused a regression where twl regulator
vaux1 was not getting enabled for the LCD panel as we are not
requesting it for the panel.
Turns out quite a few devices on n900 are using vaux1, and we need
to either stop idling it, or add proper regulator_get calls for all
users. But until we have a proper solution implemented and tested,
let's just disable the twl off-idle configuration for now for n900.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Fixes: 9188883fd6 (ARM: dts: Enable twl4030 off-idle configuration for selected omaps)
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds the clock driver for Cirrus Logic CLPS711X series SoCs
using common clock infrastructure.
Designed primarily for migration CLPS711X subarch for multiplatform & DT,
for this as the "OF" and "non-OF" calls implemented.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify
the divider has to round to closest div.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch extend the range of possible frequencies of the fs432c65
and fs660c32 Quad frequency synthesizers.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The patch added support for DT registration of ClockGenA9
It includes c32 type PLL.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The patch added support for ClockGenD0/D2/D3
It includes one 660 Quadfs.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The patch added support for DT registration of ClockGenC0
It includes 2 c32 type PLL and a 660 Quadfs.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch adds the support of quadfs reset handling.
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch introduces polarity indication for pll power up bit
and for standby bit in order to have same code between stih416
and stih407 boards.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The patch added support for DT registration of ClockGenA0
It includes c32 type PLL.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The patch supports the A9-mux clocks used by ClockGenA9
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch is the Flexgen implementation reusing as much as possible
of Common Clock Framework functions.
The idea is to have an instance of "struct flexgen" per output clock.
It represents the clock cross bar (by a mux element), and the pre and final dividers
(using dividers and gates elements).
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
A Flexgen structure is composed by:
- a clock cross bar (represented by a mux element)
- a pre and final dividers (represented by a divider and gate elements)
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
converts clkgen_pll_data tables into static const
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
converts stm_fs tables into static const
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Naming convention was changed in dts file but the
clock binding documentation hasn't been updated.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and
Jedidiah describe ways exploiting linux IP identifier generation to
infer whether two machines are exchanging packets.
With commit 73f156a6e8 ("inetpeer: get rid of ip_id_count"), we
changed IP id generation, but this does not really prevent this
side-channel technique.
This patch adds a random amount of perturbation so that IP identifiers
for a given destination [1] are no longer monotonically increasing after
an idle period.
Note that prandom_u32_max(1) returns 0, so if generator is used at most
once per jiffy, this patch inserts no hole in the ID suite and do not
increase collision probability.
This is jiffies based, so in the worst case (HZ=1000), the id can
rollover after ~65 seconds of idle time, which should be fine.
We also change the hash used in __ip_select_ident() to not only hash
on daddr, but also saddr and protocol, so that ICMP probes can not be
used to infer information for other protocols.
For IPv6, adds saddr into the hash as well, but not nexthdr.
If I ping the patched target, we can see ID are now hard to predict.
21:57:11.008086 IP (...)
A > target: ICMP echo request, seq 1, length 64
21:57:11.010752 IP (... id 2081 ...)
target > A: ICMP echo reply, seq 1, length 64
21:57:12.013133 IP (...)
A > target: ICMP echo request, seq 2, length 64
21:57:12.015737 IP (... id 3039 ...)
target > A: ICMP echo reply, seq 2, length 64
21:57:13.016580 IP (...)
A > target: ICMP echo request, seq 3, length 64
21:57:13.019251 IP (... id 3437 ...)
target > A: ICMP echo reply, seq 3, length 64
[1] TCP sessions uses a per flow ID generator not changed by this patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu>
Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ndm_type means L3 address type, in neighbour proxy and vxlan, it's RTN_UNICAST.
NDA_DST is for netlink TLV type, hence it's not right value in this context.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sunvnet driver doesn't check whether or not a port is connected when
transmitting packets, which results in failures if a port fails to connect
(e.g., due to a version mismatch). The original code also assumes
unnecessarily that the first port is up and a switch, even though there is
a flag for switch ports.
This patch only matches a port if it is connected, and otherwise uses the
switch_port flag to send the packet to a switch port that is up.
Signed-off-by: David L Stevens <david.stevens@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlPSBz0ACgkQjTAFq1RaXHPuwACfRPsgJi0EfpHAzPBkTlAR8Agw
MREAn3eKn1vdj5q55Y43mMkTZErHPr43
=jmRy
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-3.16-20140725' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2014-07-25
this is a pull request of one patch for the net tree, hoping to get into the
3.16 release.
The patch by George Cherian fixes a regression in the c_can platform driver.
When using two interfaces the regression leads to a non function second
interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some structs and arrays on the driver that are not used
anywhere else. Let's mark them as static.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This commit adds __iomem thoughout the sunxi clock driver, in places
where it was ommited. This cleans most of the sparse warnings we
are getting here.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This moves the espfix64 logic into native_iret. To make this work,
it gets rid of the native patch for INTERRUPT_RETURN:
INTERRUPT_RETURN on native kernels is now 'jmp native_iret'.
This changes the 16-bit SS behavior on Xen from OOPSing to leaking
some bits of the Xen hypervisor's RSP (I think).
[ hpa: this is a nonzero cost on native, but probably not enough to
measure. Xen needs to fix this in their own code, probably doing
something equivalent to espfix64. ]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Pull ARM AES crypto fixes from Herbert Xu:
"This push fixes a regression on ARM where odd-sized blocks supplied to
AES may cause crashes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm-aes - fix encryption of unaligned data
crypto: arm64-aes - fix encryption of unaligned data
Pull powerpc fixes from Ben Herrenschmidt:
"Here are 3 more small powerpc fixes that should still go into .16.
One is a recent regression (MMCR2 business), the other is a trivial
endian fix without which FW updates won't work on LE in IBM machines,
and the 3rd one turns a BUG_ON into a WARN_ON which is definitely a
LOT more friendly especially when the whole thing is about retrieving
error logs ..."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix endianness of flash_block_list in rtas_flash
powerpc/powernv: Change BUG_ON to WARN_ON in elog code
powerpc/perf: Fix MMCR2 handling for EBB
The wait_queue_head_t kthread_work->done is unused since
flush_kthread_work() has been re-implemented. Let's remove it
including the initialization code. This makes
DEFINE_KTHREAD_WORK_ONSTACK() unnecessary, removed.
tj: Updated description. Removed DEFINE_KTHREAD_WORK_ONSTACK().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If the worker is already executing a work item when another is queued,
we can safely skip wakeup without worrying about stalling queue thus
avoiding waking up the busy worker spuriously. Spurious wakeups
should be fine but still isn't nice and avoiding it is trivial here.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit deaff8b659.
This commit makes CLOEXEC feature undetected for normal users,
because per-cpu events are priviledged.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140728065844.GK6758@twins.programming.kicks-ass.net
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Fix the same alignment bug as in arm64 - we need to pass residue
unprocessed bytes as the last argument to blkcipher_walk_done.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 3.13+
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cryptsetup fails on arm64 when using kernel encryption via AF_ALG socket.
See https://bugzilla.redhat.com/show_bug.cgi?id=1122937
The bug is caused by incorrect handling of unaligned data in
arch/arm64/crypto/aes-glue.c. Cryptsetup creates a buffer that is aligned
on 8 bytes, but not on 16 bytes. It opens AF_ALG socket and uses the
socket to encrypt data in the buffer. The arm64 crypto accelerator causes
data corruption or crashes in the scatterwalk_pagedone.
This patch fixes the bug by passing the residue bytes that were not
processed as the last parameter to blkcipher_walk_done.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Developer stuff:
o More prep work to support Intel PT: (Adrian Hunter)
- Polishing 'script' BTS output
- 'inject' can specify --kallsym
- VDSO is per machine, not a global var
- Expose data addr lookup functions previously private to 'script'
- Large mmap fixes in events processing
o Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)
o Event ordering fixes (Jiri Olsa)
o Include standard stringify macros in power pc code (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W4Hp
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Infrastructure changes:
o More prep work to support Intel PT: (Adrian Hunter)
- Polishing 'script' BTS output
- 'inject' can specify --kallsym
- VDSO is per machine, not a global var
- Expose data addr lookup functions previously private to 'script'
- Large mmap fixes in events processing
o Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)
o Event ordering fixes (Jiri Olsa)
o Include standard stringify macros in power pc code (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fix following warning caused by missing description
"overload" in kernel/sched/fair.c
Warning(.//kernel/sched/fair.c:5906): No description found for
parameter 'overload'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1406518686-7274-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of passing around a magic number -1 for the sched_setparam()
policy, use a more descriptive macro name like SETPARAM_POLICY.
[ based on top of Daniel's sched_setparam() fix ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Daniel Bristot de Oliveira<bristot@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140723112826.6ed6cbce@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We hard assume that higher topology levels are supersets of lower
levels.
Detect, warn and try to fixup when we encounter this violated.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Bruno Wolff III <bruno@wolff.to>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140722094740.GJ12054@laptop.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no need to check cloned event's permission once the
parent was already checked.
Also the code is checking 'current' process permissions, which
is not owner process for cloned events, thus could end up with
wrong permission check result.
Reported-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1405079782-8139-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT1VYNAAoJEHm+PkMAQRiGQJwIAKSYp1Uqz5O/e5r0V1TlZKT4
1B4Njopl57PwSrJQWcGEuH2yHyM896vfPO4L6BJIOfyWzh8kwpQqclDt6uhXoF/v
OsO1zb/7/j+n/pDZsePqP9AyIgErsHEBgUbhecDqzjN++ITPcZjQ6TIMPglZaumN
jFAdAZuAaEwqAk8jqN2wlm689Fh9MuUEarHXbXLCqu5RgLrWhFGhp/cTWY62aqnZ
XfEeQ9KtpRZmlR/IYjerbb1eRH7ZdJsZ88WngLX9dj/JdNxHWBkWQBXGAusXk5Fk
y6LsIV3TjyBdrRKJ1Ifyg/2EIXHNBs8HxTFGXpjtp2HPuMLDxZOWOWikb9URtNg=
=Fjf4
-----END PGP SIGNATURE-----
Merge tag 'v3.16-rc7' into perf/core, to merge in the latest fixes before applying new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The scheduler uses policy == -1 to preserve the current policy state to
implement sched_setparam(). But, as (int) -1 is equals to 0xffffffff,
it's matching the if (policy & SCHED_RESET_ON_FORK) on
_sched_setscheduler(). This match changes the policy value to an
invalid value, breaking the sched_setparam() syscall.
This patch checks policy == -1 before check the SCHED_RESET_ON_FORK flag.
The following program shows the bug:
int main(void)
{
struct sched_param param = {
.sched_priority = 5,
};
sched_setscheduler(0, SCHED_FIFO, ¶m);
param.sched_priority = 1;
sched_setparam(0, ¶m);
param.sched_priority = 0;
sched_getparam(0, ¶m);
if (param.sched_priority != 1)
printf("failed priority setting (found %d instead of 1)\n",
param.sched_priority);
else
printf("priority setting fine\n");
}
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> # 3.14+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Fixes: 7479f3c9cf "sched: Move SCHED_RESET_ON_FORK into attr::sched_flags"
Link: http://lkml.kernel.org/r/9ebe0566a08dbbb3999759d3f20d6004bb2dbcfa.1406079891.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The function rtas_flash_firmware passes the address of a data structure,
flash_block_list, when making the update-flash-64-and-reboot rtas call.
While the endianness of the address is handled correctly, the endianness
of the data is not. This patch ensures that the data in flash_block_list
is big endian when passed to rtas on little endian hosts.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We can continue to read the error log (up to MAX size) even if
we get the elog size more than MAX size. Hence change BUG_ON to
WARN_ON.
Also updated error message.
Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull perf fixes from Thomas Gleixner:
"A bunch of fixes for perf and kprobes:
- revert a commit that caused a perf group regression
- silence dmesg spam
- fix kprobe probing errors on ia64 and ppc64
- filter kprobe faults from userspace
- lockdep fix for perf exit path
- prevent perf #GP in KVM guest
- correct perf event and filters"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64
kprobes/x86: Don't try to resolve kprobe faults from userspace
perf/x86/intel: Avoid spamming kernel log for BTS buffer failure
perf/x86/intel: Protect LBR and extra_regs against KVM lying
perf: Fix lockdep warning on process exit
perf/x86/intel/uncore: Fix SNB-EP/IVT Cbox filter mappings
perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge
perf: Revert ("perf: Always destroy groups on exit")
