Commit Graph

18919 Commits

Author SHA1 Message Date
Linus Walleij
2fd48f9442 ARM: mach-s5p: get rid of all <mach/gpio.h> headers
This renames all the local <mach/gpio.h> headers in the S5P platforms
to <mach/gpio-samsung.h> indicating a scope local to this platform,
and cuts the implicit inclusion of <mach/gpio.h> from <linux/gpio.h>
by removing the use of NEED_MACH_GPIO_H from all S5P variants.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-30 21:37:21 +02:00
Mengdong Lin
a07187c992 ALSA: hda - restore BCLK M/N values when resuming HSW/BDW display controller
For Intel Haswell/Broadwell display HD-A controller, the 24MHz HD-A link BCLK
is converted from Core Display Clock (CDCLK): BCLK = CDCLK * M / N
And there are two registers EM4 and EM5 to program M, N value respectively.
The EM4/EM5 values will be lost and when the display power well is disabled.

BIOS programs CDCLK selected by OEM and EM4/EM5, but BIOS has no idea about
display power well on/off at runtime. So the M/N can be wrong if non-default
CDCLK is used when the audio controller resumes, which results in an invalid
BCLK and abnormal audio playback rate. So this patch saves and restores valid
M/N values on controller suspend/resume.

And 'struct hda_intel' is defined to contain standard HD-A 'struct azx' and
Intel specific fields, as Takashi suggested.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-26 15:47:42 +02:00
Takashi Iwai
92a586bdc0 ALSA: usb-audio: Fix races at disconnection and PCM closing
When a USB-audio device is disconnected while PCM is still running, we
still see some race: the disconnect callback calls
snd_usb_endpoint_free() that calls release_urbs() and then kfree()
while a PCM stream would be closed at the same time and calls
stop_endpoints() that leads to wait_clear_urbs().  That is, the EP
object might be deallocated while a PCM stream is syncing with
wait_clear_urbs() with the same EP.

Basically calling multiple wait_clear_urbs() would work fine, also
calling wait_clear_urbs() and release_urbs() would work, too, as
wait_clear_urbs() just reads some fields in ep.  The problem is the
succeeding kfree() in snd_pcm_endpoint_free().

This patch moves out the EP deallocation into the later point, the
destructor callback.  At this stage, all PCMs must have been already
closed, so it's safe to free the objects.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-26 10:33:35 +02:00
Takashi Iwai
8b3dfdaf0c ALSA: hda - Adjust speaker HPF and add LED support for HP Spectre 13
HP Spectre 13 has the IDT 92HD95 codec, and BIOS seems to set the
default high-pass filter in some "safer" range, which results in the
very soft tone from the built-in speakers in contrast to Windows.
Also, the mute LED control is missing, since 92HD95 codec still has no
HP-specific fixups for GPIO setups.

This patch adds these missing features: the HPF is adjusted by the
vendor-specific verb, and the LED is set up from a DMI string (but
with the default polarity = 0 assumption due to the incomplete BIOS on
the given machine).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74841
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-25 17:50:24 +02:00
David Henningsson
76c2132ec9 ALSA: hda - Make the pin quirk tables use the SND_HDA_PIN_QUIRK macro
This is cosmetical - it makes the pin quirk table look better.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-24 14:48:34 +02:00
David Henningsson
a2d2fa02b2 ALSA: hda - Make a SND_HDA_PIN_QUIRK macro
This is cosmetical - it makes the new pin quirk table look better.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-24 14:48:31 +02:00
David Henningsson
7a52cd79fa ALSA: hda - Add pin quirk for Dell XPS 15
Two bug reporters with Dell XPS 15 report that they need to use the
dell-headset-multi model to get the headset mic working.

The two bug reporters have different PCI SSID (1028:05fd and 1028:05fe)
but this pin quirk matches both.

BugLink: https://bugs.launchpad.net/bugs/1331915
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-24 14:16:15 +02:00
Pierre Ossman
a283368382 ALSA: hda - hdmi: call overridden init on resume
We need to call the proper init function in case it has been
overridden, as it might restore things that the generic routing
doesn't know anything about. E.g. AMD cards have special verbs
that need resetting.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77901
Fixes: 5a61358433 ('ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support')
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Cc: <stable@vger.kernel.org> [v3.13+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-23 12:38:28 +02:00
David Henningsson
8fffe7d1f0 ALSA: hda - Fix usage of "model" module parameter
A recent refactoring broke the possibility to manually specify
model name as a module parameter. This patch restores the desired
functionality.

Fixes: c21c8cf77f ('ALSA: hda - Add fixup_forced flag')
Reported-by: Kent Baxley <kent.baxley@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-23 12:21:12 +02:00
Takashi Iwai
8d42fda9ea Merge branch 'topic/core-vuln-fixes' into for-linus 2014-06-18 16:38:45 +02:00
Takashi Iwai
6c0c9a3db4 ASoC: Fixes for v3.16
Quite a few build coverage fixes in here among the usual small driver
 fixes includling the sigmadsp change from Lars - moving the driver to
 separate modules per bus (which is basically just code motion) avoids
 issues with some combinations of buses being enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJToCEOAAoJELSic+t+oim9hS8P/jtMAdaR3JO5R1qtg8qj1tO8
 ati7DEhkKHn+9rSv4rBtfjqFk0Tdy4r9ulQAS88D9k3WGWpZgUf8wdfMWdL94s5I
 WRJbvtcss7VGarfOAEreaqd3/PJ0buVLeUm+JNap794WW74BqPlfw6+JveWCAL1V
 UfRlkQ+PwbU4f7ieXKrtpinOpffFY6hB6N19l+nPqyy0aCn5S/rv4SXUkcJ77slG
 jOjM1yxg2/RR25LDRqm6uyi2032KwhQZEyP3OccxcRWIROzltqNa+biPJwjdpUlo
 aVHQ2vICFovOC1WsWSEwjntkLvgYOJGP/50ecC2SqgL6QmvR03isUqSKzkIxigog
 2+fMEeXEn7gtjQNpZFDk2Ku9DDbDR22SaRlrjaMOa/YMCc8ylSY1IXuL51IkEfip
 tSWGOGvg7veYhVQtnxu7wSxtnK/Gb53ugRxFYba1f44bxOKl5KByPfSY22e65e2X
 hVFqVDbikEszcU7AJxMVKvGb1bPF+RGTmlfL20IXnxs/OtGVx0FURZGKLAMagVXr
 3Um0W4HzAipmCBW5NmbQu+gAWoOa17c9rILOc4IaIW5zCvv+V8AURaiwT5sHtUhU
 JAeNIPIVadO7Lps+bgGT/Auisa8loFiYXFGOJecgcXPiMnZ+2jp7Gb3EgG5Gl8YQ
 boxQMUoCp3d+I2+uAqpm
 =oF1h
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.16

Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.
2014-06-18 16:32:14 +02:00
Lars-Peter Clausen
883a1d49f0 ALSA: control: Make sure that id->index does not overflow
The ALSA control code expects that the range of assigned indices to a control is
continuous and does not overflow. Currently there are no checks to enforce this.
If a control with a overflowing index range is created that control becomes
effectively inaccessible and unremovable since snd_ctl_find_id() will not be
able to find it. This patch adds a check that makes sure that controls with a
overflowing index range can not be created.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:13:37 +02:00
Lars-Peter Clausen
ac902c112d ALSA: control: Handle numid overflow
Each control gets automatically assigned its numids when the control is created.
The allocation is done by incrementing the numid by the amount of allocated
numids per allocation. This means that excessive creation and destruction of
controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to
eventually overflow. Currently when this happens for the control that caused the
overflow kctl->id.numid + kctl->count will also over flow causing it to be
smaller than kctl->id.numid. Most of the code assumes that this is something
that can not happen, so we need to make sure that it won't happen

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:13:23 +02:00
Lars-Peter Clausen
fd9f26e4ec ALSA: control: Don't access controls outside of protected regions
A control that is visible on the card->controls list can be freed at any time.
This means we must not access any of its memory while not holding the
controls_rw_lock. Otherwise we risk a use after free access.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:13:07 +02:00
Lars-Peter Clausen
82262a4662 ALSA: control: Fix replacing user controls
There are two issues with the current implementation for replacing user
controls. The first is that the code does not check if the control is actually a
user control and neither does it check if the control is owned by the process
that tries to remove it. That allows userspace applications to remove arbitrary
controls, which can cause a user after free if a for example a driver does not
expect a control to be removed from under its feed.

The second issue is that on one hand when a control is replaced the
user_ctl_count limit is not checked and on the other hand the user_ctl_count is
increased (even though the number of user controls does not change). This allows
userspace, once the user_ctl_count limit as been reached, to repeatedly replace
a control until user_ctl_count overflows. Once that happens new controls can be
added effectively bypassing the user_ctl_count limit.

Both issues can be fixed by instead of open-coding the removal of the control
that is to be replaced to use snd_ctl_remove_user_ctl(). This function does
proper permission checks as well as decrements user_ctl_count after the control
has been removed.

Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at
beginning of the function if the control already exists is removed. This is not
a problem though since the check is quite useless, because the lock that is
protecting the control list is released between the check and before adding the
new control to the list, which means that it is possible that a different
control with the same settings is added to the list after the check. Luckily
there is another check that is done while holding the lock in snd_ctl_add(), so
we'll rely on that to make sure that the same control is not added twice.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:12:49 +02:00
Lars-Peter Clausen
07f4d9d74a ALSA: control: Protect user controls against concurrent access
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:12:33 +02:00
Mark Brown
28e48f0e26 Merge remote-tracking branches 'asoc/fix/fsl-dma', 'asoc/fix/fsl-spdif', 'asoc/fix/pxa', 'asoc/fix/rcar' and 'asoc/fix/sigmadsp' into asoc-linus 2014-06-16 16:05:16 +01:00
Mark Brown
1f84acd2dc Merge remote-tracking branch 'asoc/fix/core' into asoc-linus 2014-06-16 16:05:15 +01:00
Takashi Iwai
74b0c2d75f drm/i915, HD-audio: Don't continue probing when nomodeset is given
When a machine is booted with nomodeset option, i915 driver skips the
whole initialization.  Meanwhile, HD-audio tries to bind wth i915 just
by request_symbol() without knowing that the initialization was
skipped, and eventually it hits WARN_ON() in i915_request_power_well()
and i915_release_power_well() wrongly but still continues probing,
even though it doesn't work at all.

In this patch, both functions are changed to return an error in case
of uninitialized state instead of WARN_ON(), so that HD-audio driver
can give up HDMI controller initialization at the right time.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> [3.15]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-16 10:34:06 +02:00
Linus Torvalds
6391f34e84 sound fixes for 3.16-rc1
Most of changes are small and easy cleanup or fixes.
 
 - a few HD-audio Realtek codec fixes and quirks
 - Intel HDMI audio fixes for Broadwell and Haswell / ValleyView
 - FireWire sound stack cleanups
 - a couple of sequencer core fixes
 - compress ABI fix for 64bit
 - Conversion to modern ktime*() API
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTmumTAAoJEGwxgFQ9KSmk68IQAKZNZ1v+L8y3F7/u6jgFXx8q
 K1AJoQH1ZnIUCoo5TZmeFftgn9B8fQMbX4yHCZNpPm3rcKvnT/kSF7/x6EEfJ8Cm
 rodcmD6C5wgaEQ6d5YKd/R3Wc0uYjakoof/ev5ffVDJ41mOnTNIAODkHAzLxjpNw
 30V2oxH8F/myt4zFPJuUqSJhewH+rtKO6YXePHQ59800EUCb1A8KN0fXki3jytgb
 zbVBsbteEVIFwy4Rsr+EPybU6bmcFc3Zhb6I5r3J6utJJTdzT+eN2g09EY8zavfn
 aH4MbCPRQDqBnFgTzW0fqMpIZ+zZV/q5khuFyv9qouPfNvKflD2u5HswyDSH6Jd3
 N/YiW5wim5pgQ2KNEv3oh/0psUoRyCsjgh/qlXAd+miBqeltjCATCvo0NALe2y9n
 vMdTt0P3eq/Q/BHfsLGYXavSnDotRFvTAk6Stkm46r+YwY8i+yq9GO9sSEJ3Uo2M
 ow80Lj71xbHXcGFA+zQKhW1PLpk3nIbNQhuQ0Mb+QCKT57s3CmCeW3gXNWviJGl6
 3gQuUvNiWEyW+Z+oDacvj3+Ud8pWymfIwXZaMq0/jNBqXolwPVdgeIFzot5cDHxd
 T/OV04kbt34D0yty0hY0Hwrh97mnsCfpV/zlzGcvFeK8XDJthUmZaTQ5Jus485uh
 IRi5YoB6I0opWLKo7jVT
 =HPX8
 -----END PGP SIGNATURE-----

Merge tag 'sound-fix-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Most of changes are small and easy cleanup or fixes:

   - a few HD-audio Realtek codec fixes and quirks
   - Intel HDMI audio fixes for Broadwell and Haswell / ValleyView
   - FireWire sound stack cleanups
   - a couple of sequencer core fixes
   - compress ABI fix for 64bit
   - conversion to modern ktime*() API"

* tag 'sound-fix-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: hda/realtek - Add more entry for enable HP mute led
  ALSA: hda - Add quirk for external mic on Lifebook U904
  ALSA: hda - fix a fixup value for codec alc293 in the pin_quirk table
  ALSA: intel8x0: Use ktime and ktime_get()
  ALSA: core: Use ktime_get_ts()
  ALSA: hda - verify pin:converter connection on unsol event for HSW and VLV
  ALSA: compress: Cancel the optimization of compiler and fix the size of struct for all platform.
  ALSA: hda - Add quirk for ABit AA8XE
  Revert "ALSA: hda - mask buggy stream DMA0 for Broadwell display controller"
  ALSA: hda - using POS_FIX_LPIB on Broadwell HDMI Audio
  ALSA: hda/realtek - Add support of ALC667 codec
  ALSA: hda/realtek - Add more codec rename
  ALSA: hda/realtek - New vendor ID for ALC233
  ALSA: hda - add two new pin tables
  ALSA: hda/realtek - Add support of ALC891 codec
  ALSA: seq: Continue broadcasting events to ports if one of them fails
  ALSA: bebob: Remove unused function prototype
  ALSA: fireworks: Remove meaningless mutex_destroy()
  ALSA: fireworks: Remove a constant over width to which it's applied
  ALSA: fireworks: Improve comments about Fireworks transaction
  ...
2014-06-13 07:42:49 -07:00
Kailang Yang
8a02b164d4 ALSA: hda/realtek - Add more entry for enable HP mute led
More HP machine need mute led support.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13 11:38:35 +02:00
David Henningsson
2041d56464 ALSA: hda - Add quirk for external mic on Lifebook U904
According to the bug reporter (Данило Шеган), the external mic
starts to work and has proper jack detection if only pin 0x19
is marked properly as an external headset mic.

AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1328587
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13 11:21:05 +02:00
Hui Wang
64eb428078 ALSA: hda - fix a fixup value for codec alc293 in the pin_quirk table
The fixup value for codec alc293 was set to
ALC269_FIXUP_DELL1_MIC_NO_PRESENCE by a mistake, if we don't fix it,
the Dock mic will be overwriten by the headset mic, this will make
the Dock mic can't work.

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13 10:48:55 +02:00
Thomas Gleixner
2afe8be85c ALSA: intel8x0: Use ktime and ktime_get()
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts() and returns
the monotonic time in a timespec.

Use ktime based ktime_get() and use the ktime_delta_us() function to
calculate the delta instead of open coding the timespec math.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12 12:58:41 +02:00
Thomas Gleixner
26204e048d ALSA: core: Use ktime_get_ts()
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12 12:58:16 +02:00
Mengdong Lin
b4f75aea55 ALSA: hda - verify pin:converter connection on unsol event for HSW and VLV
This patch will verify the pin's coverter selection for an active stream
when an unsol event reports this pin becomes available again after a display
mode change or hot-plug event.

For Haswell+ and Valleyview: display mode change or hot-plug can change the
transcoder:port connection and make all the involved audio pins share the 1st
converter. So the stream using 1st convertor will flow to multiple pins
but active streams using other converters will fail. This workaround
is to assure the pin selects the right conveter and an assigned converter is
not shared by other unused pins.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12 11:59:43 +02:00
Guenter Roeck
3d5f615f9f ASoC: fsl: Fix build problem
Commit 432481220 (ASoC: fsl-ssi: Use regmap) removed struct ccsr_ssi.
Unfortunately, the structure is still used. This causes
mpc85xx_smp_defconfig and mpc85xx_defconfig builds to fail with

sound/soc/fsl/fsl_dma.c:926:50:
  error: invalid use of undefined type 'struct ccsr_ssi'
  dma->ssi_stx_phys = res.start + offsetof(struct ccsr_ssi, stx0);
ound/soc/fsl/fsl_dma.c:927:50:
  error: invalid use of undefined type 'struct ccsr_ssi'
  dma->ssi_srx_phys = res.start + offsetof(struct ccsr_ssi, srx0);

Fix by using constants, similar to original commit.

Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-12 00:34:16 +01:00
Kuninori Morimoto
4cf612780c ASoC: rsnd: fixup index of src/dst mod when capture
Index of dma name should use -1, not +1 when capture case.
Thank you Dan.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-12 00:33:44 +01:00
David Henningsson
6538de03a9 ALSA: hda - Add quirk for ABit AA8XE
Bios does not set up the pin config default correctly (everything
is set to zero). Reporter claims that 6stack-dig and 6stack-automute
solve the problem.

Alsa-info at http://www.alsa-project.org/db/?f=376c0804cbdde90bcd2cb94799407cb1cacf5d05
BugLink: https://bugs.launchpad.net/bugs/1319291
Reported-by: Stefano Statuti <stefano.statuti@hotmail.it>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-10 16:00:42 +02:00
Anssi Hannula
c89c7e94bb ASoC: fsl_spdif: Fix integer overflow when calculating divisors
The calculation code does
u64 = (u32 - u32) * 100000;

The 64 bits are of no help here as the type is casted only after the
multiplication, and therefore the result may overflow, possibly causing
inoptimal or wrong clock setup in an unfortunate case (the maximum
result value of the first substraction is currently 47999).

Fix the code to cast before multiplication.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-09 21:00:42 +01:00
Nicolin Chen
e9b383dc94 ASoC: fsl_spdif: Fix incorrect usage of regmap_read()
We should not copy the return value into this val since it's supposed to
get the value of the register not the success result of regmap_read().
Thus fix it.

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-09 21:00:23 +01:00
Jarkko Nikula
18626c7ebc ASoC: dapm: Make sure register value is in sync with DAPM kcontrol state
Commit c9e065c27f ("ASoC: dapm: Make sure to always update the DAPM graph
in _put_volsw()") stopped updating register values in those cases where
initial after boot state of kcontrol appears to not change but where
register value still needs update because it is not in sync with the
kcontrol state.

Fix this by doing snd_soc_test_bits() unconditionally as it was before but
by using separate flags for kcontrol and register state changes. This allow
both DAPM graph to be updated when disabling auto-muted control and update
register if it is out-of-sync in respect of kcontrol state.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-09 20:56:53 +01:00
Libin Yang
a49d4d7c6e Revert "ALSA: hda - mask buggy stream DMA0 for Broadwell display controller"
This reverts commit 7189eb9b8f.

It will use LPIB to get the DMA position on Broadwell HDMI Audio.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-09 09:32:19 +02:00
Libin Yang
54a0405dda ALSA: hda - using POS_FIX_LPIB on Broadwell HDMI Audio
Broadwell HDMI can't use position buffer reliably, force to use LPIB

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-09 09:32:08 +02:00
Lars-Peter Clausen
6b10998d74 ASoC: sigmadsp: Split regmap and I2C support into separate modules
When the SigmaDSP module is built-in, but the I2C core is build as a module
we'll get a undefined reference:

	sound/built-in.o: In function `sigma_action_write_i2c':
		:(.text+0x5d8d4): undefined reference to `i2c_master_send'

This can happen if a audio driver that is using the regmap SigmaDSP interface is
built into the kernel, but core I2C support is build as a module. To fix this
split the SigmaDSP module into three modules, one module providing the core
infrastructure and two small modules implementing the regmap and I2C interfaces.
This allows e.g. the core infrastructure and regmap support to be built into the
kernel while I2C support can still be build as a module.

Fixes: dab464b60 ("ASoC: Add ADAU1361/ADAU1761 audio CODEC support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-06 14:09:45 +01:00
Kailang Yang
72009433b2 ALSA: hda/realtek - Add support of ALC667 codec
New codec suooprt of ALC667.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06 14:36:02 +02:00
Kailang Yang
e6e5f7adc9 ALSA: hda/realtek - Add more codec rename
Some vendor has special bonding options.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06 14:35:59 +02:00
Kailang Yang
92f974df34 ALSA: hda/realtek - New vendor ID for ALC233
This is compatible with ALC255.
It is use for Lenovo.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06 14:35:53 +02:00
Hui Wang
560b92779c ALSA: hda - add two new pin tables
These two new pin tables can fix headset mic problems for several
new Dell machines.

And also delete some machines from old quirk table since the existing
pin talbes already cover them.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06 07:56:41 +02:00
Arnd Bergmann
5ab0862e5d ASoC: MMP audio needs sram support
From e7a94bb7fb871c73cc85712d89c1f48d0271c1be Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 5 Jun 2014 12:31:28 +0200
Subject: [PATCH] ASoC: MMP audio needs sram support

Building the pxa/mmp audio driver without support for the mmp
sram driver enabled results in this link error:

sound/built-in.o: In function `mmp_pcm_free_dma_buffers':
:(.text+0x3e734): undefined reference to `sram_get_gpool'
sound/built-in.o: In function `mmp_pcm_new':
:(.text+0x3e7c0): undefined reference to `sram_get_gpool'

The sram driver is cannot be manually enabled and needs to
be turned on by selecting MMP_SRAM from each module that
needs it, which is what this patch does.

Ideally, MMP should move over to the generic SRAM support, but
for the moment, we can avoid the build error.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-05 12:35:13 +01:00
Kailang Yang
b6c5fbad16 ALSA: hda/realtek - Add support of ALC891 codec
New codec support for ALC891.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-05 08:52:36 +02:00
Linus Torvalds
b77279bc2e sound updates for 3.16-rc1
At this time, majority of changes come from ASoC world while we got a
 few new drivers in other places for FireWire and USB.  There have been
 lots of ASoC core cleanups / refactoring, but very little visible to
 external users.
 
 ASoC
 - Support for specifying aux CODECs in DT
 - Removal of the deprecated mux and enum macros
 - More moves towards full componentisation
 - Removal of some unused I/O code
 - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
   Haswell and Realtek drivers
 - Several drivers exposed directly in Kconfig for use with simple-card
 - GPIO descriptor support for jacks
 - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
 - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
   ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781,
   and Realtek RT5677
 
 HD-audio:
 - Clean up Dell headset quirks
 - Noise fixes for Dell and Sony laptops
 - Thinkpad T440 dock fix
 - Realtek codec updates (ALC293,ALC233,ALC3235)
 - Tegra HD-audio HDMI support
 
 FireWire-audio:
 - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming
   isochronous stream and duplex streams with timestamp synchronization
 - BeBoB-based devices support
 - Fireworks-based device support
 
 USB-audio:
 - Behringer BCD2000 USB device support
 
 Misc:
 - Clean up of a few old drivers, atmel, fm801, etc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjzW4AAoJEGwxgFQ9KSmkUrMP/1z43Kp+F9Y0v0VBH6oR/d4N
 l9IyxBno/ABxfWloGFnRLEyzZyj2yG8A7inT0alVXJifHJN4iPOKBb5dPE9LMRvc
 qLhJjMwznAirkuE8Wsk+IAoKuyXEI4m+KKEIXt5WJ3UyAo/j1lySZVMChzcTFFk/
 oc2C6CciYrQLziaaL/K5zD9v9XdDr9koOaSHK/xjUOCbDlEBJu6T2IvRI/tkqJmy
 8oRRhRteXZ9D959+ftntKrFVf10APQ4ZQbsX/pHboduaoozYAJSJGFhQNbh/UZnb
 zwwwanNZvLwzn+rRXJJuzHF4jra34CuQFL2awsDP9Wck9E3YLmt4audNQ6LM6J8z
 IVZs5IjMIL1ey1T2oRczLnv7EoDp0xdP38GqXnQ88j3zd+Ifi77idNw1ssU1aZ5B
 LzEFEytT1UbEUkqom9qtIG+GId9hSmVmHQuLsc6Ayg7md0oBeJnBC05Xt5FATdrp
 HseHYfSrNNDBFKyj8+j0TVtHc9Xf4SKziSVWz/PT0gaROzOsR2e46HC2Hvut+OFZ
 rLLPXn9up5viQFxOTbO7sdYGCYa/iVH7IwB2oCP6Z5/I8+fhsU7aA4Hl+0wBikin
 PDSwuchmRlNpHJ18YDonjzFtWA51wG4IlcNbQY4ywO/jFae06KYxQPTwvmJI0+oV
 GXyKtjdBnQg8nnWJlS8J
 =nxFA
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next

Pull sound updates from Takashi Iwai:
 "At this time, majority of changes come from ASoC world while we got a
  few new drivers in other places for FireWire and USB.  There have been
  lots of ASoC core cleanups / refactoring, but very little visible to
  external users.

  ASoC:
   - Support for specifying aux CODECs in DT
   - Removal of the deprecated mux and enum macros
   - More moves towards full componentisation
   - Removal of some unused I/O code
   - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
     Haswell and Realtek drivers
   - Several drivers exposed directly in Kconfig for use with
     simple-card
   - GPIO descriptor support for jacks
   - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
   - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651
     and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and
     ADAU1781, and Realtek RT5677

  HD-audio:
   - Clean up Dell headset quirks
   - Noise fixes for Dell and Sony laptops
   - Thinkpad T440 dock fix
   - Realtek codec updates (ALC293,ALC233,ALC3235)
   - Tegra HD-audio HDMI support

  FireWire-audio:
   - FireWire audio stack enhancement (AMDTP, MIDI), support for
     incoming isochronous stream and duplex streams with timestamp
     synchronization
   - BeBoB-based devices support
   - Fireworks-based device support

  USB-audio:
   - Behringer BCD2000 USB device support

  Misc:
   - Clean up of a few old drivers, atmel, fm801, etc"

* tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits)
  ASoC: Fix wrong argument for card remove callbacks
  ASoC: free jack GPIOs before the sound card is freed
  ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation
  ASoC: cache: Fix error code when not using ASoC level cache
  ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
  ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
  ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
  ASoC: add RT5677 CODEC driver
  ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
  ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support
  ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support
  ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
  ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  ASoC: Add helper functions to cast from DAPM context to CODEC/platform
  ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
  ASoC: wm9713: correct mono out PGA sources
  ALSA: synth: emux: soundfont.c: Cleaning up memory leak
  ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320
  ASoC: fsl-ssi: Use regmap
  ASoC: fsl-ssi: reorder and document fsl_ssi_private
  ...
2014-06-04 09:08:25 -07:00
Adam Goode
27423257b7 ALSA: seq: Continue broadcasting events to ports if one of them fails
Sometimes PORT_EXIT messages are lost when a process is exiting.
This happens if you subscribe to the announce port with client A,
then subscribe to the announce port with client B, then kill client A.
Client B will not see the PORT_EXIT message because client A's port is
closing and is earlier in the announce port subscription list. The
for each loop will try to send the announcement to client A and fail,
then will stop trying to broadcast to other ports. Killing B works fine
since the announcement will already have gone to A. The CLIENT_EXIT
message does not get lost.

How to reproduce problem:

*** termA
$ aseqdump -p 0:1
  0:1   Port subscribed            0:1 -> 128:0

*** termB
$ aseqdump -p 0:1

*** termA
  0:1   Client start               client 129
  0:1   Port start                 129:0
  0:1   Port subscribed            0:1 -> 129:0

*** termB
  0:1   Port subscribed            0:1 -> 129:0

*** termA
^C

*** termB
  0:1   Client exit                client 128
   <--- expected Port exit as well (before client exit)

Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 17:30:58 +02:00
Takashi Sakamoto
1c9b8f5125 ALSA: bebob: Remove unused function prototype
snd_bebob_stream_map() is not defined.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 14:38:16 +02:00
Takashi Sakamoto
021fb6f275 ALSA: fireworks: Remove meaningless mutex_destroy()
Currently mutex_destroy() is called in module's cleanup function. But after
cleaned up, this mutex is automatically released. So this function call
is meaningless.

[fixed a typo in changelog by tiwai]

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 14:37:59 +02:00
Takashi Sakamoto
f347915092 ALSA: fireworks: Remove a constant over width to which it's applied
The constants of enum snd_efw_grp_type is for struct snd_efw_phys_grp.type.
But this member is 1 byte. Although the value is between 0x00-0xff, a constant
has 0x10000. This constant is meaningless.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 14:36:40 +02:00
Takashi Sakamoto
72f784f7d0 ALSA: fireworks: Improve comments about Fireworks transaction
It includes descriptions to cause misreading.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 14:36:21 +02:00
Takashi Sakamoto
cf44a136c0 ALSA: fireworks: Use safer way to arrange ring buffer pointer
To reverse a pointer for the ring buffer, subtraction by buffer
size is better than assignment to the beginning of the buffer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 14:35:40 +02:00
Takashi Sakamoto
c6e5e741c6 ALSA: fireworks/bebob: Shorten critical section for stream_stop_duplex()
All assignment for local variables in these functions are not related to
critical section.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 14:35:24 +02:00
Adam Goode
21fd3e956e ALSA: seq: correctly detect input buffer overflow
snd_seq_event_dup returns -ENOMEM in some buffer-full conditions,
but usually returns -EAGAIN. Make -EAGAIN trigger the overflow
condition in snd_seq_fifo_event_in so that the fifo is cleared
and -ENOSPC is returned to userspace as stated in the alsa-lib docs.

Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 07:12:12 +02:00