Commit Graph

3811 Commits

Author SHA1 Message Date
Sachin Kamat
2f2ff14c27 mtd: denali_dt: Change return value to fix smatch warning
platform_get_irq() also returns -ENXIO upon failure.
Use it instead of hardcoded return type.

Fixes the following smatch warning:
drivers/mtd/nand/denali_dt.c:93 denali_dt_probe() info:
why not propagate 'denali->irq' from platform_get_irq() instead of (-6)?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 14:04:20 +01:00
Sachin Kamat
82fc812ca4 mtd: denali_dt: Use module_platform_driver()
module_platform_driver() removes some boilerplate and makes the code
simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 14:04:06 +01:00
Sachin Kamat
6c67050ab1 mtd: denali_dt: Fix incorrect error check
The return value of devm_ioremap_nocache should be checked here instead
of res.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 14:03:53 +01:00
Gupta, Pekon
837a6ba4f3 mtd: nand: subpage write support for hardware based ECC schemes
This patch adds support for subpage (partial-page) writes when using
hardware based ECC schemes.
Advantages:
(1) reduces storage overhead when using file-systems like UBIFS, which
store LEB header at page-size granularity.
(2) allows independent subpage writes, thereby increasing NAND storage
efficiency for non-page aligned data.
+ updated cafe_nand and lpc32xx_mlc NAND drivers for change in
chip->write_page interface.

Signed-off-by: Gupta, Pekon <pekon@ti.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:22:59 +01:00
Toan Pham
4ff6772b5b mtd: omap2: use msecs_to_jiffies()
Fix mtd-utils from returning -EIO. Formatting jffs2 filesystem was impossible
when CONFIG_HZ was set to a low value.

Signed-off-by: Toan Pham <tpham3783@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:22:30 +01:00
Artem Bityutskiy
0c4a235cb3 mtd: nand_ids: use size macros
Use the convenient 'SZ_8K' and 'SZ_16K' macros for the eraseblock size in the
NAND IDs table. This is a little more readable.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:22:06 +01:00
Artem Bityutskiy
5bfa9b71a2 mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
Notice that all the flashes belonging to the "legacy ID" class have 512 bytes
NAND page. This means we may simplify the 'LEGACY_ID_NAND()' macro as well as
the NAND ID table a little.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:21:41 +01:00
Huang Shijie
92a2645820 mtd: add 4 Toshiba nand chips for the full-id case
I have 4 Toshiba nand chips which can not be parsed out by the
id data. We can not get the oob size from the id data. So add them
as the full-id nand chips in the first of nand_flash_ids.

The comment for the full-id items is from Brian.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:21:21 +01:00
Huang Shijie
ec6e87e378 mtd: add the support to parse out the full-id nand type
When we meet a full-id nand type whose @id_len is not zero, we can use
the find_full_id_nand() to parse out the necessary information for a
nand chip.

If we meet a non full-id nand type, we can handle it in the legacy way.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:20:42 +01:00
Sachin Kamat
bd247acb77 mtd: sh_flctl: Use of_match_ptr() macro
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:20:14 +01:00
Sachin Kamat
b57d43ff64 mtd: gpio: Use of_match_ptr() macro
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:20:09 +01:00
Sachin Kamat
b60c724386 mtd: gpio: Use devm_kzalloc()
devm_kzalloc() is device managed and makes cleanup simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:20:05 +01:00
Sachin Kamat
c4f8cde834 mtd: davinci_nand: Use of_match_ptr()
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:19:56 +01:00
Sachin Kamat
19d69b8600 mtd: dataflash: Use of_match_ptr() macro
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:19:51 +01:00
Arnd Bergmann
dcf8abfcb0 mtd: remove h720x flash support
The h720x platform support is going away in linux-3.10, so the
MTD driver will also not be needed any more.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:19:36 +01:00
Artem Bityutskiy
75d0c37419 mtd: onenand: remove OneNAND simulator
This commit remove OneNAND simulator on the basis that it is useless.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:19:26 +01:00
Artem Bityutskiy
660685d9d1 mtd: merge mtdchar module with mtdcore
The MTD subsystem has historically tried to be as configurable as possible. The
side-effect of this is that its configuration menu is rather large, and we are
gradually shrinking it. For example, we recently merged partitions support with
the mtdcore.

This patch does the next step - it merges the mtdchar module to mtdcore. And in
this case this is not only about eliminating too fine-grained separation and
simplifying the configuration menu. This is also about eliminating seemingly
useless kernel module.

Indeed, mtdchar is a module that allows user-space making use of MTD devices
via /dev/mtd* character devices. If users do not enable it, they simply cannot
use MTD devices at all. They cannot read or write the flash contents. Is it a
sane and useful setup? I believe not. And everyone just enables mtdchar.

Having mtdchar separate is also a little bit harmful. People sometimes miss the
fact that they need to enable an additional configuration option to have
user-space MTD interfaces, and then they wonder why on earth the kernel does
not allow using the flash? They spend time asking around.

Thus, let's just get rid of this module and make it part of mtd core.

Note, mtdchar had additional configuration option to enable OTP interfaces,
which are present on some flashes. I removed that option as well - it saves a
really tiny amount space.

[dwmw2: Strictly speaking, you can mount file systems on MTD devices just
        fine without the mtdchar (or mtdblock) devices; you just can't do
        other manipulations directly on the underlying device. But still I
        agree that it makes sense to make this unconditional. And Yay! we
        get to kill off an instance of checking CONFIG_foo_MODULE, which is
        an abomination that should never happen.]

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:16:54 +01:00
Artem Bityutskiy
cb70783c65 mtd: mtdcore: cleanup mtdcore.h a little
Remove useless extern qualifiers. Not that this is a problem, but we more often
declare function prototypes without 'extern', so this is just about being more
consistent. And I am going to add a couple more prototypes here.

Additionally, remove a useless comment.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:15:53 +01:00
Artem Bityutskiy
57ae2b609f mtd: mtdchar: use proper kernel print level
We normally use 'pr_err()' for error messages, not 'pr_notice()'.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:15:38 +01:00
Artem Bityutskiy
93e562141a mtd: mtdcore: remove few useless #ifdef's
Remove a couple of useles '#ifdef CONFIG_PROC_FS's around procfs functions
which anyway turn into empty function in 'proc_fs.h' file when CONFIG_PROC_FS
is not defined.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:15:31 +01:00
Artem Bityutskiy
c188a14167 mtd: remove the h1910 NAND driver
This driver is marked as broken for 2 years, and no one cares to make it
compile and work. Now it is time to zap it.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:15:17 +01:00
Artem Bityutskiy
3e6f9aff77 mtd: remove the ppchameleonevb NAND driver
This driver has been marked as broken for long time and it depends on a
non-existing PPCHAMELEONEVB Kconfig symbol.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:15:12 +01:00
Jingoo Han
97135118bd mtd: davinci_nand: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:42 +01:00
Jingoo Han
3a2a13fa90 mtd: txx9ndfmc: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:40 +01:00
Jingoo Han
14ec6dae5b mtd: sh_flctl: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:37 +01:00
Jingoo Han
307d2a5156 mtd: fsmc_nand: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:34 +01:00
Jingoo Han
c5345edf7b mtd: atmel_nand: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:31 +01:00
Jingoo Han
d9ba31092c mtd: orion_nand: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:29 +01:00
Jingoo Han
725a2277f8 mtd: doc: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:24 +01:00
Rafał Miłecki
a6fb35d379 mtd: bcm47xxsflash: define opcodes
We need them to add erase/write support. This may duplicate some defines
with bcma and/or ssb code, but it makes more sense to keep that in
bcm47xxsflash which is supposed to work with both buses.
Duplicated defines will be removed from ssb/bcma.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:17 +01:00
Rafał Miłecki
1f816bc729 mtd: bcm47xxsflash: store info about flash type
It's going to be needed for erase and write operations, they differ
between Atmel and ST flashes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:14 +01:00
Rafał Miłecki
41c81536ea mtd: bcm47xxsflash: keep a reference to the BCMA
To implement erase and write support we need to "talk" with ChipCommon
BCMA core which serial flash it attached to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:14:05 +01:00
Artem Bityutskiy
ccef4dcc5a mtd: mtdcore: use const qualifier
Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:04:27 +01:00
Artem Bityutskiy
afffeec9e0 mtd: devices: add const qualifiers
Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:04:22 +01:00
Artem Bityutskiy
0984c89104 mtd: maps: add const qualifiers
Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:04:20 +01:00
Artem Bityutskiy
cce2a026b5 mtd: physmap_of: add const qualifiers
Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:04:13 +01:00
Artem Bityutskiy
f39cf6c7d4 mtd: physmap: add const qualifiers
Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:02:40 +01:00
Artem Bityutskiy
d50dcb1d0e mtd: plat-ram: add const quilifiers
Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:02:33 +01:00
Artem Bityutskiy
26a4734623 mtd: add 'const' qualifier to a couple of register functions
'mtd_device_parse_register()' and 'parse_mtd_partitions()' functions accept a
an array of character pointers. These functions modify neither the pointers nor
the characters they point to. The characters are actually names of the MTD
parsers.

At the moment, the argument type is 'const char **', which means that only the
names of the parsers are constant. Let's turn the argument type into 'const
char * const *', which means that both names and the pointers which point to
them are constant.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:02:16 +01:00
Artem Bityutskiy
b08a25ade2 mtd: remove the ixp2000 map driver
This driver depends on CONFIG_IXP2000 which is not defined anywhere, which
means this driver is dead.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:01:55 +01:00
Artem Bityutskiy
bece641c96 mtd: remove the dilnetpc map driver support
This driver is marked as broken for very long time. Most probably this board is
just something ancient no one cares about anyway.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:01:43 +01:00
Artem Bityutskiy
a312c87ab0 mtd: remove the tqm8xxl map driver
This driver depends on the CONFIG_TQM8xxL symbol, which is not defined
anywhere, which means that this driver is dead.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 13:01:34 +01:00
Artem Bityutskiy
83bfc0d1a7 mtd: maps: kill the rpxlite map driver
This driver depends on the CONFIG_RPXCLASSIC and CONFIG_RPXLITE symbols, which
are not defined anywhere, and this means that this driver is dead.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:59:42 +01:00
Artem Bityutskiy
2c31904136 mtd: remove the mbx860 map driver
This driver depends on CONFIG_MBX which is not defined anywhere, which means
this driver is dead.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:57:37 +01:00
Artem Bityutskiy
f708364b67 mtd: remove the dmv182 map driver
This driver depends on the CONFIG_DMV182 symbol which is not defined anywhere,
and this means that this driver is dead.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:57:32 +01:00
Artem Bityutskiy
e6828b1b7a mtd: remove the dbox2-flash map driver
This driver depends on the CONFIG_DBOX2 symbol which does not exist in
the kernel, which means the driver is dead.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:57:24 +01:00
Daniel Mack
ad2457894c mtd: devices: elm: check for device's presence before configuration
In case the driver is not probed - due to config mismatches or errors
in the DTS files - dev_get_drvdata() returns NULL, leading to an Ooops
during boot.

Make elm_config() return an error in such cases to propagate the error
up to the user, so it can fall back to software mode.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:57:18 +01:00
Alexander Shiyan
0cca9fbf5d mtd: nand_base: Removed unnecessary cleaning "onfi_version" variable
Variable "onfi_version" is already set to zero before nand_flash_detect_onfi()
call, so additional cleaning is not necessary.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:56:53 +01:00
Alexander Shiyan
fb066adadd mtd: nand_base: Removed unnecessary command masking
NAND command, passed to cmd_ctrl(), is masked with 0xff. This patch
removes this since masking is not necessary and masking is not performed
in other places for same call.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:56:44 +01:00
Rafał Miłecki
001c33ab4c mtd: m25p80: add entry for w25q128
This device was reported over a year ago on OpenWrt mailing list in the
thread [OpenWrt-Devel] RedBoot partition table with winbond m25q128vb
(unfortunately, I can't find message id). Macpaul seemed to have
problems with partition driver, but it seems the device was working OK.

Reported-by: Macpaul Lin <macpaul@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:55:36 +01:00