Xiaomi Book Pro 14 2022 (MIA2210-AD) requires a quirk entry for its
internal microphone to be enabled.
This is likely due to similar reasons as seen previously on Redmi Book
14/15 Pro 2022 models (since they likely came with similar firmware):
- commit dcff8b7ca9 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022
into DMI table")
- commit c1dd6bf619 ("ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022
into DMI table")
A quirk would likely be needed for Xiaomi Book Pro 15 2022 models, too.
However, I do not have such device on hand so I will leave it for now.
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20241106024052.15748-1-jeffbai@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Fixes: cccb78ce89 ("arm64/sve: Rework SVE access trap to convert state in registers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Fix for Thinkpad's with ECFW showing incorrect fan speed. Some models use
decimal instead of hexadecimal for the speed stored in the EC registers.
For example the rpm register will have 0x4200 instead of 0x1068, here
the actual RPM is "4200" in decimal.
Add a quirk to handle this.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241105235505.8493-1-vishnuocv@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
pending interrupts results in that L2 vCPU getting an infinite flood of
spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
LPCR_MER bit if there are pending interrupts.
The spurious flood problem can be observed in 2 cases:
1. Crashing the guest while interrupt heavy workload is running
a. Start a L2 guest and run an interrupt heavy workload (eg: ipistorm)
b. While the workload is running, crash the guest (make sure kdump
is configured)
c. Any one of the vCPUs of the guest will start getting an infinite
flood of spurious interrupts.
2. Running LTP stress tests in multiple guests at the same time
a. Start 4 L2 guests.
b. Start running LTP stress tests on all 4 guests at same time.
c. In some time, any one/more of the vCPUs of any of the guests will
start getting an infinite flood of spurious interrupts.
The root cause of both the above issues is the same:
1. A NMI is sent to a running vCPU that has LPCR_MER bit set.
2. In the NMI path, all registers are refreshed, i.e, H_GUEST_GET_STATE
is called for all the registers.
3. When H_GUEST_GET_STATE is called for LPCR, the vcpu->arch.vcore->lpcr
of that vCPU at L1 level gets updated with LPCR_MER set to 1, and this
new value is always used whenever that vCPU runs, regardless of whether
there was a pending interrupt.
4. Since LPCR_MER is set, the vCPU in L2 always jumps to the external
interrupt handler, and this cycle never ends.
Fix the spurious flood by masking off the LPCR_MER bit before running a
L2 vCPU to ensure that it is not set if there are no pending interrupts.
[1] Terminology:
1. L0 : PAPR hypervisor running in HV mode
2. L1 : Linux guest (logical partition) running on top of L0
3. L2 : KVM guest running on top of L1
Fixes: ec0f6639fa ("KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-04 (ice, idpf, i40e, e1000e)
For ice:
Marcin adjusts ordering of calls in ice_eswitch_detach() to resolve a
use after free issue.
Mateusz corrects variable type for Flow Director queue to fix issues
related to drop actions.
For idpf:
Pavan resolves issues related to reset on idpf; avoiding use of freed
vport and correctly unrolling the mailbox task.
For i40e:
Aleksandr fixes a race condition involving addition and deletion of VF
MAC filters.
For e1000e:
Vitaly reverts workaround for Meteor Lake causing regressions in power
management flows.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Remove Meteor Lake SMBUS workarounds
i40e: fix race condition by adding filter's intermediate sync state
idpf: fix idpf_vc_core_init error path
idpf: avoid vport access in idpf_get_link_ksettings
ice: change q_index variable type to s16 to store -1 value
ice: Fix use after free during unload with ports in bridge
====================
Link: https://patch.msgid.link/20241104223639.2801097-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: fix wrong perm and sock kfree
Two small fixes related to the MPTCP path-manager:
- Patch 1: remove an accidental restriction to admin users to list MPTCP
endpoints. A regression from v6.7.
- Patch 2: correctly use sock_kfree_s() instead of kfree() in the
userspace PM. A fix for another fix introduced in v6.4 and
backportable up to v5.19.
====================
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-0-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The local address entries on userspace_pm_local_addr_list are allocated
by sock_kmalloc().
It's then required to use sock_kfree_s() instead of kfree() to free
these entries in order to adjust the allocated size on the sk side.
Fixes: 24430f8bf5 ("mptcp: add address into userspace pm list")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-2-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.
It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.
mptcp_pm_gen.c has been modified using ynl-gen-c.py:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
The header file doesn't need to be regenerated.
Fixes: 1d0507f468 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DP83848 datasheet (section 4.7.2) indicates that the reset pin should be
toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to
make sure that this indication is respected.
In my experience not having this flag enabled would lead to, on some
boots, the wrong MII mode being selected if the PHY was initialized on
the bootloader and was receiving data during Linux boot.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 34e45ad937 ("net: phy: dp83848: Add TI DP83848 Ethernet PHY")
Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().
Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.
We move a number of things here:
1. We preallocate memory for the iterator before we call the file-backed
memory hook, allowing us to exit early and avoid having to perform
complicated and error-prone close/free logic. We carefully free
iterator state on both success and error paths.
2. The enclosing mmap_region() function handles the mapping_map_writable()
logic early. Previously the logic had the mapping_map_writable() at the
point of mapping a newly allocated file-backed VMA, and a matching
mapping_unmap_writable() on success and error paths.
We now do this unconditionally if this is a file-backed, shared writable
mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
doing so does not invalidate the seal check we just performed, and we in
any case always decrement the counter in the wrapper.
We perform a debug assert to ensure a driver does not attempt to do the
opposite.
3. We also move arch_validate_flags() up into the mmap_region()
function. This is only relevant on arm64 and sparc64, and the check is
only meaningful for SPARC with ADI enabled. We explicitly add a warning
for this arch if a driver invalidates this check, though the code ought
eventually to be fixed to eliminate the need for this.
With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.
This eliminates an entire class of errors, makes the code easier to reason
about and more robust.
Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor the map_deny_write_exec() to not unnecessarily require a VMA
parameter but rather to accept VMA flags parameters, which allows us to
use this function early in mmap_region() in a subsequent commit.
While we're here, we refactor the function to be more readable and add
some additional documentation.
Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Incorrect invocation of VMA callbacks when the VMA is no longer in a
consistent state is bug prone and risky to perform.
With regards to the important vm_ops->close() callback We have gone to
great lengths to try to track whether or not we ought to close VMAs.
Rather than doing so and risking making a mistake somewhere, instead
unconditionally close and reset vma->vm_ops to an empty dummy operations
set with a NULL .close operator.
We introduce a new function to do so - vma_close() - and simplify existing
vms logic which tracked whether we needed to close or not.
This simplifies the logic, avoids incorrect double-calling of the .close()
callback and allows us to update error paths to simply call vma_close()
unconditionally - making VMA closure idempotent.
Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/cover.1730224667.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3fa ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c8 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3fa commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b55 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.
Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com
Fixes: 87eaceb3fa ("mm: thp: make deferred split shrinker memcg aware")
Fixes: dafff3f4c8 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
The new unlocked list_del_init() in deferred_split_scan() is buggy. I
gave bad advice, it looks plausible since that's a local on-stack list,
but the fact is that it can race with a third party freeing or migrating
the preceding folio (properly unqueueing it with refcount 0 while holding
split_queue_lock), thereby corrupting the list linkage.
The obvious answer would be to take split_queue_lock there: but it has a
long history of contention, so I'm reluctant to add to that. Instead,
make sure that there is always one safe (raised refcount) folio before, by
delaying its folio_put(). (And of course I was wrong to suggest updating
split_queue_len without the lock: leave that until the splice.)
And remove two over-eager partially_mapped checks, restoring those tests
to how they were before: if uncharge_folio() or free_tail_page_prepare()
finds _deferred_list non-empty, it's in trouble whether or not that folio
is partially_mapped (and the flag was already cleared in the latter case).
Link: https://lkml.kernel.org/r/81e34a8b-113a-0701-740e-2135c97eb1d7@google.com
Fixes: dafff3f4c8 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The exec queue timestamp is only really useful when it's being queried
through the fdinfo. There's no need to update it so often, on every
job_free. Tracing a simple app like vkcube running shows an update
rate of ~ 120Hz. In case of discrete, the BO is on vram, creating a lot
of pcie transactions.
The update on job_free() is used to cover a gap: if exec
queue is created and destroyed rapidly, before a new query, the
timestamp still needs to be accumulated and accounted for in the xef.
Initial implementation in commit 6109f24f87 ("drm/xe: Add helper to
accumulate exec queue runtime") couldn't do it on the exec_queue_fini
since the xef could be gone at that point. However since commit
ce8c161cba ("drm/xe: Add ref counting for xe_file") the xef is
refcounted and the exec queue always holds a reference, making this safe
now.
Improve the fix in commit 2149ded630 ("drm/xe: Fix use after free when
client stats are captured") by reducing the frequency in which the
update is needed.
Fixes: 2149ded630 ("drm/xe: Fix use after free when client stats are captured")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 83db047d9425d9a649f01573797558eff0f632e1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In unlikely event that we fail during sending the new VF GGTT
configuration to the GuC, we will free only the GGTT node data
struct but will miss to release the actual GGTT allocation.
This will later lead to list corruption, GGTT space leak and
finally risking crash when unloading the driver:
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-EIO)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] list_add corruption. next->prev should be prev (ffff88813cfcd628), but was 0000000000000000. (next=ffff88813cfe2028).
[ ] RIP: 0010:__list_add_valid_or_report+0x6b/0xb0
[ ] Call Trace:
[ ] drm_mm_insert_node_in_range+0x2c0/0x4e0
[ ] xe_ggtt_node_insert+0x46/0x70 [xe]
[ ] pf_provision_vf_ggtt+0x7f5/0xa70 [xe]
[ ] xe_gt_sriov_pf_config_set_ggtt+0x5e/0x770 [xe]
[ ] ggtt_set+0x4b/0x70 [xe]
[ ] simple_attr_write_xsigned.constprop.0.isra.0+0xb0/0x110
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-ENOSPC)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP NOPTI
[ ] RIP: 0010:drm_mm_remove_node+0x1b7/0x390
[ ] Call Trace:
[ ] <TASK>
[ ] ? die_addr+0x2e/0x80
[ ] ? exc_general_protection+0x1a1/0x3e0
[ ] ? asm_exc_general_protection+0x22/0x30
[ ] ? drm_mm_remove_node+0x1b7/0x390
[ ] ggtt_node_remove+0xa5/0xf0 [xe]
[ ] xe_ggtt_node_remove+0x35/0x70 [xe]
[ ] xe_ttm_bo_destroy+0x123/0x220 [xe]
[ ] intel_user_framebuffer_destroy+0x44/0x70 [xe]
[ ] intel_plane_destroy_state+0x3b/0xc0 [xe]
[ ] drm_atomic_state_default_clear+0x1cd/0x2f0
[ ] intel_atomic_state_clear+0x9/0x20 [xe]
[ ] __drm_atomic_state_free+0x1d/0xb0
Fix that by using pf_release_ggtt() on the error path, which now
works regardless if the node has GGTT allocation or not.
Fixes: 34e804220f ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104144901.1903-1-michal.wajdeczko@intel.com
(cherry picked from commit 43b1dd2b550f0861ce80fbfffd5881b1b26272b1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Upon failure all locks need to be dropped before returning to the user.
Fixes: 58480c1c91 ("drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-3-matthew.brost@intel.com
(cherry picked from commit 7d1a4258e602ffdce529f56686925034c1b3b095)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In a couple of places after an exec queue is looked up the exec IOCTL
returns on input errors without dropping the exec queue ref. Fix this
ensuring the exec queue ref is dropped on input error.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-2-matthew.brost@intel.com
(cherry picked from commit 07064a200b40ac2195cb6b7b779897d9377e5e6f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks. Fix
alpha PLL post_div mask for the cases where width is not specified.
Enable the use of the recently introduced HW_CTRL trigger feature for
SM8350 video clocks, to avoid hangs in the venus driver.
-----BEGIN PGP SIGNATURE-----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=y0zK
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes
Pull Qualcomm clk driver fixes from Bjorn Andersson:
- Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks
- Fix alpha PLL post_div mask for the cases where width is not
specified
- Avoid hangs in the SM8350 video driver (venus) by setting HW_CTRL
trigger feature on the video clocks
* tag 'qcom-clk-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags
clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set
clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not
null. So the release of the dma channel leads to the following issue:
[ 4.879000] st,stm32-spdifrx 500d0000.audio-controller:
dma_request_slave_channel error -19
[ 4.888975] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000003d
[...]
[ 5.096577] Call trace:
[ 5.099099] dma_release_channel+0x24/0x100
[ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx]
[ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx]
To avoid this issue, release channel only if the pointer is valid.
Fixes: 794df9448e ("ASoC: stm32: spdifrx: manage rebind issue")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241105140242.527279-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid a possible buffer overflow if size is larger than 4K.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5d873f582)
Cc: stable@vger.kernel.org
Users should not be able to run these.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ba9395430)
Cc: stable@vger.kernel.org
Regular users shouldn't have read access.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c0cfd2e652)
Cc: stable@vger.kernel.org
For DPX mode, the number of memory partitions supported should be less
than or equal to 2.
Fixes: 1589c82a10 ("drm/amdgpu: Check memory ranges for valid xcp mode")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 990c4f5807)
Cc: stable@vger.kernel.org
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Fixes to multi queue RX feature
On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows. Patch 1 fixes this.
The second patch fixes a warning if there was any error in
am65_cpsw_nuss_init_rx_chns() and am65_cpsw_nuss_cleanup_rx_chns()
was called after that.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
====================
Link: https://patch.msgid.link/20241101-am65-cpsw-multi-rx-j7-fix-v3-0-338fdd6a55da@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
flow->irq is initialized to 0 which is a valid IRQ. Set it to -EINVAL
in error path of am65_cpsw_nuss_init_rx_chns() so we do not try
to free an unallocated IRQ in am65_cpsw_nuss_remove_rx_chns().
If user tried to change number of RX queues and am65_cpsw_nuss_init_rx_chns()
failed due to any reason, the warning will happen if user tries to change
the number of RX queues after the error condition.
root@am62xx-evm:~# ethtool -L eth0 rx 3
[ 40.385293] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 40.393211] am65-cpsw-nuss 8000000.ethernet: Failed to init rx flow2
netlink error: Invalid argument
root@am62xx-evm:~# ethtool -L eth0 rx 2
[ 82.306427] ------------[ cut here ]------------
[ 82.311075] WARNING: CPU: 0 PID: 378 at kernel/irq/devres.c:144 devm_free_irq+0x84/0x90
[ 82.469770] Call trace:
[ 82.472208] devm_free_irq+0x84/0x90
[ 82.475777] am65_cpsw_nuss_remove_rx_chns+0x6c/0xac [ti_am65_cpsw_nuss]
[ 82.482487] am65_cpsw_nuss_update_tx_rx_chns+0x2c/0x9c [ti_am65_cpsw_nuss]
[ 82.489442] am65_cpsw_set_channels+0x30/0x4c [ti_am65_cpsw_nuss]
[ 82.495531] ethnl_set_channels+0x224/0x2dc
[ 82.499713] ethnl_default_set_doit+0xb8/0x1b8
[ 82.504149] genl_family_rcv_msg_doit+0xc0/0x124
[ 82.508757] genl_rcv_msg+0x1f0/0x284
[ 82.512409] netlink_rcv_skb+0x58/0x130
[ 82.516239] genl_rcv+0x38/0x50
[ 82.519374] netlink_unicast+0x1d0/0x2b0
[ 82.523289] netlink_sendmsg+0x180/0x3c4
[ 82.527205] __sys_sendto+0xe4/0x158
[ 82.530779] __arm64_sys_sendto+0x28/0x38
[ 82.534782] invoke_syscall+0x44/0x100
[ 82.538526] el0_svc_common.constprop.0+0xc0/0xe0
[ 82.543221] do_el0_svc+0x1c/0x28
[ 82.546528] el0_svc+0x28/0x98
[ 82.549578] el0t_64_sync_handler+0xc0/0xc4
[ 82.553752] el0t_64_sync+0x190/0x194
[ 82.557407] ---[ end trace 0000000000000000 ]---
Fixes: da70d184a8 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows.
This issue is not present on AM62 as separate pair of
rings are used for free and completion rings for each flow.
Fix this by allocating enough elements for RX free descriptor
ring 0.
However, we can no longer rely on desc_idx (descriptor based
offsets) to identify the pages in the respective flows as
free descriptor ring includes elements for all flows.
To solve this, introduce a new swdata data structure to store
flow_id and page. This can be used to identify which flow (page_pool)
and page the descriptor belonged to when popped out of the
RX rings.
Fixes: da70d184a8 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rick reported that his Pluggable USB4 dock does not work anymore after
upgrading to v6.10 kernel.
It looks like commit c6ca1ac9f4 ("thunderbolt: Increase sideband
access polling delay") makes the device router enumeration happen later
than what might be expected by the dock (although there is no such limit
in the USB4 spec) which probably makes it assume there is something
wrong with the high-speed link and reset it. After the link is reset the
same issue happens again and again.
For this reason lower the sideband access delay from 5ms to 1ms. This
seems to work fine according to Rick's testing.
Reported-by: Rick Lahaye <rick@581238.xyz>
Closes: https://lore.kernel.org/linux-usb/000f01db247b$d10e1520$732a3f60$@581238.xyz/
Tested-by: Rick Lahaye <rick@581238.xyz>
Fixes: c6ca1ac9f4 ("thunderbolt: Increase sideband access polling delay")
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If dev_get_regmap() fails, it returns NULL pointer not ERR_PTR(),
replace IS_ERR() with NULL pointer check, and return -ENODEV.
Fixes: d0f8e97866 ("i2c: muxes: add support for tsd,mule-i2c multiplexer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control()
Fixes: 170a6726d0 ("usb: typec: ucsi: add support for separate DP altmode devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.
Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: William McVicker <willmcvicker@google.com>
Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@google.com
Fixes: 705e3ce37b ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241104-am62-lpm-usb-fix-v1-1-e93df73a4f0d@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are uninitialized. This commit stops to print uninitialized
value and misleading/false data.
Cc: stable@vger.kernel.org
Fixes: a4422ff221 (" usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241030133632.2116-1-rex.nie@jaguarmicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:
[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670] klist_put+0x28/0x12c
[15278.138682][T50670] klist_del+0x14/0x20
[15278.142592][T50670] device_del+0xbc/0x3c0
[15278.146676][T50670] pci_remove_bus_device+0x84/0x120
[15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670] sriov_disable+0x50/0x11c
[15278.166829][T50670] pci_disable_sriov+0x24/0x30
[15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670] invoke_syscall+0x50/0x11c
[15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670] do_el0_svc+0x34/0xcc
[15278.207834][T50670] el0_svc+0x20/0x30
For details, see the following figure.
rmmod hclge disable VFs
----------------------------------------------------
hclge_exit() sriov_numvfs_store()
... device_lock()
pci_disable_sriov() hns3_pci_sriov_configure()
pci_disable_sriov()
sriov_disable()
sriov_disable() if !num_VFs :
if !num_VFs : return;
return; sriov_del_vfs()
sriov_del_vfs() ...
... klist_put()
klist_put() ...
... num_VFs = 0;
num_VFs = 0; device_unlock();
In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store().
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101091507.3644584-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 6ed05c68cb ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit().
Fixes: 6ed05c68cb ("usb: musb: sunxi: Explicitly release USB PHY on exit")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d80a309130, reversing
changes made to 637f414763:
2cf2461435 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices")
3e22b7de34 ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue")
d1c2e2961a ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()")
5f62009ff1 ("net: hns3: don't auto enable misc vector")
2758f18a83 ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.")
662ecfc466 ("net: hns3: fix missing features due to dev->features configuration too early")
3e0f7cc887 ("net: hns3: fixed reset failure issues caused by the incorrect reset type")
f2c14899ca ("net: hns3: add sync command to sync io-pgtable")
e6ab19443b ("net: hns3: default enable tx bounce buffer when smmu enabled")
The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds.
Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTC update work involves runtime resuming the UFS controller. Hence,
only start the RTC update work after runtime power management in the UFS
driver has been fully initialized. This patch fixes the following kernel
crash:
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Workqueue: events ufshcd_rtc_work
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
pm_runtime_get_if_active+0x24/0x9c (L)
pm_runtime_get_if_active+0x24/0x9c
ufshcd_rtc_work+0x138/0x1b4
process_one_work+0x148/0x288
worker_thread+0x2cc/0x3d4
kthread+0x110/0x114
ret_from_fork+0x10/0x20
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/
Fixes: 6bf999e0eb ("scsi: ufs: core: Add UFS RTC support")
Cc: Bean Huo <beanhuo@micron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241031212632.2799127-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmcpJbATHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b7NTCACdt8guPlyrootWDkKzkzIVGNgphauG
NcL5Ok45hCwz7NfDc5rRN12HsR0qveAabRHIReCNhDcdSU8H4MK+wUa/FONFh548
mEcH9iDJs6ALbPC4uWIwTcehznFl/tGgD4oLlP34U8aCfLaihMaFsbywUQnI0LCb
LejkKD0Q+8uac3RPj63DO5FmWz300fRqo8az+bXDHG2Oa270Dtzz0gYKV9UyG/xs
4rLWVM5iAPETq9wkWetIdR2RXQzkJwI6OuuxLHV0YQlNQITLDSMBPfomrUjeee5b
NPYtLy8mO6rddCqDFAMTP+CES7Dh66OGssD6NEGJQTh+OIlPAxKVWFcm
=hX2j
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.12-20241104' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-11-04
Alexander Hölzl contributes a patch to fix an error in the CAN j1939
documentation.
Thomas Mühlbacher's patch allows building of the {cc770,sja1000}_isa
drivers on x86_64 again.
A patch by me targets the m_can driver and limits the call to
free_irq() to devices with IRQs.
Dario Binacchi's patch fixes the RX and TX error counters in the c_can
driver.
The next 2 patches target the rockchip_canfd driver. Geert
Uytterhoeven's patch lets the driver depend on ARCH_ROCKCHIP. Jean
Delvare's patch drops the obsolete dependency on COMPILE_TEST.
The last 2 patches are by me and fix 2 regressions in the mcp251xfd
driver: fix broken coalescing configuration when switching CAN modes
and fix the length calculation of the Transmit Event FIFO (TEF) on
full TEF.
* tag 'linux-can-fixes-for-6.12-20241104' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration when switching CAN modes
can: rockchip_canfd: Drop obsolete dependency on COMPILE_TEST
can: rockchip_canfd: CAN_ROCKCHIP_CANFD should depend on ARCH_ROCKCHIP
can: c_can: fix {rx,tx}_errors statistics
can: m_can: m_can_close(): don't call free_irq() for IRQ-less devices
can: {cc770,sja1000}_isa: allow building on x86_64
can: j1939: fix error in J1939 documentation.
====================
Link: https://patch.msgid.link/20241104200120.393312-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Where the last set of fixes was mostly drivers, this time the devicetree
changes all come at once, targeting mostly the Rockchips, Qualcomm and
NXP platforms.
The Qualcomm bugfixes target the Snapdragon X Elite laptops, specifically
problems with PCIe and NVMe support to improve reliability, and a boot
regresion on msm8939. Also for Snapdragon platforms, there are a number
of correctness changes in the several platform specific device drivers,
but none of these are as impactful.
On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
correcting individual entries in the devicetree that were incorrect and
causing the media, video, mmc and spi drivers to misbehave in minor
ways.
The Arm SCMI firmware driver gets fixes for a use-after-free bug and
for correctly parsing firmware information.
On the RISC-V side, there are three minor devicetree fixes for starfive
and sophgo, again addressing only minor mistakes. One device driver
patch fixes a problem with spurious interrupt handling.
-----BEGIN PGP SIGNATURE-----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=9YYG
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Where the last set of fixes was mostly drivers, this time the
devicetree changes all come at once, targeting mostly the Rockchips,
Qualcomm and NXP platforms.
The Qualcomm bugfixes target the Snapdragon X Elite laptops,
specifically problems with PCIe and NVMe support to improve
reliability, and a boot regresion on msm8939.
Also for Snapdragon platforms, there are a number of correctness
changes in the several platform specific device drivers, but none of
these are as impactful.
On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
correcting individual entries in the devicetree that were incorrect
and causing the media, video, mmc and spi drivers to misbehave in
minor ways.
The Arm SCMI firmware driver gets fixes for a use-after-free bug and
for correctly parsing firmware information.
On the RISC-V side, there are three minor devicetree fixes for
starfive and sophgo, again addressing only minor mistakes. One device
driver patch fixes a problem with spurious interrupt handling"
* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
MAINTAINERS: invert Misc RISC-V SoC Support's pattern
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
...
If Client send simultaneous SMB operations to ksmbd, It exhausts too much
memory through the "ksmbd_work_cache”. It will cause OOM issue.
ksmbd has a credit mechanism but it can't handle this problem. This patch
add the check if it exceeds max credits to prevent this problem by assuming
that one smb request consumes at least one credit.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_user_session_put should be called under smb3_preauth_hash_rsp().
It will avoid freeing session before calling smb3_preauth_hash_rsp().
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race condition between ksmbd_smb2_session_create and
ksmbd_expire_session. This patch add missing sessions_table_lock
while adding/deleting session from global session table.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU
capacity on hybrid systems") overlooked a corner case in which some
CPUs may be offline to start with and brought back online later,
after the intel_pstate driver has been registered, so their asymmetric
capacity will not be set.
Address this by calling hybrid_update_capacity() in the CPU
initialization path that is executed instead of the online path
for those CPUs.
Note that this asymmetric capacity update will be skipped during
driver initialization and mode switches because hybrid_max_perf_cpu
is NULL in those cases.
Fixes: 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1913414.tdWV9SEqCh@rjwysocki.net
