There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'.
Fixes: edea94a697 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb3_reconfigure(), after duplicating ctx->password and
ctx->password2 with kstrdup(), we need to check for allocation
failures.
If ses->password allocation fails, return -ENOMEM.
If ses->password2 allocation fails, free ses->password, set it
to NULL, and return -ENOMEM.
Fixes: c1eb537bf4 ("cifs: allow changing password during remount")
Reviewed-by: David Howells <dhowells@redhat.com
Signed-off-by: Haoxiang Li <make24@iscas.ac.cn>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_ses_find_chan() has been unused since commit
f486ef8e20 ("cifs: use the chans_need_reconnect bitmap for reconnect status")
cifs_read_page_from_socket() has been unused since commit
d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
cifs_chan_in_reconnect() has been unused since commit
bc962159e8 ("cifs: avoid race conditions with parallel reconnects")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The if condition in collect_sample: can never be satisfied
because of a logical contradiction. The indicated dead code
may have performed some action; that action will never occur.
Fixes: 94ae8c3fee ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
print_report+0x156/0x4d9
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
? __virt_addr_valid+0x145/0x310
? __phys_addr+0x46/0x90
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_report+0xda/0x110
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_check_range+0x10f/0x1f0
__asan_memcpy+0x3c/0x60
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
smb2_compound_op+0x238c/0x3840 [cifs]
? kasan_save_track+0x14/0x30
? kasan_save_free_info+0x3b/0x70
? vfs_symlink+0x1a1/0x2c0
? do_symlinkat+0x108/0x1c0
? __pfx_smb2_compound_op+0x10/0x10 [cifs]
? kmem_cache_free+0x118/0x3e0
? cifs_get_writable_path+0xeb/0x1a0 [cifs]
smb2_get_reparse_inode+0x423/0x540 [cifs]
? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? __kmalloc_noprof+0x37c/0x480
? smb2_create_reparse_symlink+0x257/0x490 [cifs]
? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
smb2_create_reparse_symlink+0x38f/0x490 [cifs]
? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
cifs_symlink+0x24f/0x960 [cifs]
? __pfx_make_vfsuid+0x10/0x10
? __pfx_cifs_symlink+0x10/0x10 [cifs]
? make_vfsgid+0x6b/0xc0
? generic_permission+0x96/0x2d0
vfs_symlink+0x1a1/0x2c0
do_symlinkat+0x108/0x1c0
? __pfx_do_symlinkat+0x10/0x10
? strncpy_from_user+0xaa/0x160
__x64_sys_symlinkat+0xb9/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08d75c13bb
Reported-by: David Howells <dhowells@redhat.com>
Fixes: e77fe73c7e ("cifs: we can not use small padding iovs together with encryption")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Clang static checker(scan-build) warning：
fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory.
1304 | kfree(ea);
| ^~~~~~~~~
There is a double free in such case:
'ea is initialized to NULL' -> 'first successful memory allocation for
ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea'
-> 'goto replay_again' -> 'second goto sea_exit before allocate memory
for ea' -> 'second memory release for ea resulted in double free'.
Re-initialie 'ea' to NULL near to the replay_again label, it can fix this
double free problem.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Calling 'ln -s . symlink' or 'ln -s .. symlink' creates symlink pointing to
some object name which ends with U+F029 unicode codepoint. This is because
trailing dot in the object name is replaced by non-ASCII unicode codepoint.
So Linux SMB client currently is not able to create native symlink pointing
to current or parent directory on Windows SMB server which can be read by
either on local Windows server or by any other SMB client which does not
implement compatible-reverse character replacement.
Fix this problem in cifsConvertToUTF16() function which is doing that
character replacement. Function comment already says that it does not need
to handle special cases '.' and '..', but after introduction of native
symlinks in reparse point form, this handling is needed.
Note that this change depends on the previous change
"cifs: Improve creating native symlinks pointing to directory".
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB protocol for native symlinks distinguish between symlink to directory
and symlink to file. These two symlink types cannot be exchanged, which
means that symlink of file type pointing to directory cannot be resolved at
all (and vice-versa).
Windows follows this rule for local filesystems (NTFS) and also for SMB.
Linux SMB client currenly creates all native symlinks of file type. Which
means that Windows (and some other SMB clients) cannot resolve symlinks
pointing to directory created by Linux SMB client.
As Linux system does not distinguish between directory and file symlinks,
its API does not provide enough information for Linux SMB client during
creating of native symlinks.
Add some heuristic into the Linux SMB client for choosing the correct
symlink type during symlink creation. Check if the symlink target location
ends with slash, or last path component is dot or dot-dot, and check if the
target location on SMB share exists and is a directory. If at least one
condition is truth then create a new SMB symlink of directory type.
Otherwise create it as file type symlink.
This change improves interoperability with Windows systems. Windows systems
would be able to resolve more SMB symlinks created by Linux SMB client
which points to existing directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=Ky9w
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- statfs fix (e.g. when limited access to root directory of share)
- special file handling fixes: fix packet validation to avoid buffer
overflow for reparse points, fixes for symlink path parsing (one for
reparse points, and one for SFU use case), and fix for cleanup after
failed SET_REPARSE operation.
- fix for SMB2.1 signing bug introduced by recent patch to NFS symlink
path, and NFS reparse point validation
- comment cleanup
* tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not convert delimiter when parsing NFS-style symlinks
cifs: Validate content of NFS reparse point buffer
cifs: Fix buffer overflow when parsing NFS reparse points
smb: client: Correct typos in multiple comments across various files
smb: client: use actual path when queryfs
cifs: Remove intermediate object of failed create reparse call
Revert "smb: client: make SHA-512 TFM ephemeral"
smb: Update comments about some reparse point tags
cifs: Check for UTF-16 null codepoint in SFU symlink target location
NFS-style symlinks have target location always stored in NFS/UNIX form
where backslash means the real UNIX backslash and not the SMB path
separator.
So do not mangle slash and backslash content of NFS-style symlink during
readlink() syscall as it is already in the correct Linux form.
This fixes interoperability of NFS-style symlinks with backslashes created
by Linux NFS3 client throw Windows NFS server and retrieved by Linux SMB
client throw Windows SMB server, where both Windows servers exports the
same directory.
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Symlink target location stored in DataBuffer is encoded in UTF-16. So check
that symlink DataBuffer length is non-zero and even number. And check that
DataBuffer does not contain UTF-16 null codepoint because Linux cannot
process symlink with null byte.
DataBuffer for char and block devices is 8 bytes long as it contains two
32-bit numbers (major and minor). Add check for this.
DataBuffer buffer for sockets and fifos zero-length. Add checks for this.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev().
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
If CREATE was successful but SMB2_OP_SET_REPARSE failed then remove the
intermediate object created by CREATE. Otherwise empty object stay on the
server when reparse call failed.
This ensures that if the creating of special files is unsupported by the
server then no empty file stay on the server as a result of unsupported
operation.
Fixes: 102466f303 ("smb: client: allow creating special files via reparse points")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check that read buffer of SFU symlink target location does not contain
UTF-16 null codepoint (via UniStrnlen() call) because Linux cannot process
symlink with null byte, it truncates everything in buffer after null byte.
Fixes: cf2ce67345 ("cifs: Add support for reading SFU symlink location")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The SHA-512 shash TFM is used only briefly during Session Setup stage,
when computing SMB 3.1.1 preauth hash.
There's no need to keep it allocated in servers' secmech the whole time,
so keep its lifetime inside smb311_update_preauth_hash().
This also makes smb311_crypto_shash_allocate() redundant, so expose
smb3_crypto_shash_allocate() and use that.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
The HMAC-MD5 shash TFM is used only briefly during Session Setup stage,
when computing NTLMv2 hashes.
There's no need to keep it allocated in servers' secmech the whole time,
so keep its lifetime inside setup_ntlmv2_rsp().
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
When having several mounts that share same credential and the client
couldn't re-establish an SMB session due to an expired kerberos ticket
or rotated password, smb2_calc_signature() will end up flooding dmesg
when not finding SMB sessions to calculate signatures.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For extra channels, point ->secmech.{enc,dec} to the primary
server ones.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=nVf0
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Most are from the recent SMB3.1.1 test event, and also an important
netfs fix for a cifs mtime write regression
- fix mode reported by stat of readonly directories and files
- DFS (global namespace) related fixes
- fixes for special file support via reparse points
- mount improvement and reconnect fix
- fix for noisy log message on umount
- two netfs related fixes, one fixing a recent regression, and add
new write tracepoint"
* tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Fix mtime/ctime update for mmapped writes
cifs: update internal version number
smb: client: print failed session logoffs with FYI
cifs: Fix reversion of the iter in cifs_readv_receive().
smb3: fix incorrect mode displayed for read-only files
smb: client: fix parsing of device numbers
smb: client: set correct device number on nfs reparse points
smb: client: propagate error from cifs_construct_tcon()
smb: client: fix DFS failover in multiuser mounts
cifs: Make the write_{enter,done,err} tracepoints display netfs info
smb: client: fix DFS interlink failover
smb: client: improve purging of cached referrals
smb: client: avoid unnecessary reconnects when refreshing referrals
Do not flood dmesg with failed session logoffs as kerberos tickets
getting expired or passwords being rotated is a very common scenario.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_read_iter_from_socket() copies the iterator that's passed in for the
socket to modify as and if it will, and then advances the original iterator
by the amount sent. However, both callers revert the advancement (although
receive_encrypted_read() zeros beyond the iterator first). The problem is,
though, that cifs_readv_receive() reverts by the original length, not the
amount transmitted which can cause an oops in iov_iter_revert().
Fix this by:
(1) Remove the iov_iter_advance() from cifs_read_iter_from_socket().
(2) Remove the iov_iter_revert() from both callers. This fixes the bug in
cifs_readv_receive().
(3) In receive_encrypted_read(), if we didn't get back as much data as the
buffer will hold, copy the iterator, advance the copy and use the copy
to drive iov_iter_zero().
As a bonus, this gets rid of some unnecessary work.
This was triggered by generic/074 with the "-o sign" mount option.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Commands like "chmod 0444" mark a file readonly via the attribute flag
(when mapping of mode bits into the ACL are not set, or POSIX extensions
are not negotiated), but they were not reported correctly for stat of
directories (they were reported ok for files and for "ls"). See example
below:
root:~# ls /mnt2 -l
total 12
drwxr-xr-x 2 root root 0 Sep 21 18:03 normaldir
-rwxr-xr-x 1 root root 0 Sep 21 23:24 normalfile
dr-xr-xr-x 2 root root 0 Sep 21 17:55 readonly-dir
-r-xr-xr-x 1 root root 209716224 Sep 21 18:15 readonly-file
root:~# stat -c %a /mnt2/readonly-dir
755
root:~# stat -c %a /mnt2/readonly-file
555
This fixes the stat of directories when ATTR_READONLY is set
(in cases where the mode can not be obtained other ways).
root:~# stat -c %a /mnt2/readonly-dir
555
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Report correct major and minor numbers from special files created with
NFS reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix major and minor numbers set on special files created with NFS
reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Propagate error from cifs_construct_tcon() in cifs_sb_tlink() instead of
always returning -EACCES.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For sessions and tcons created on behalf of new users accessing a
multiuser mount, matching their sessions in tcon_super_cb() with
master tcon will always lead to false as every new user will have its
own session and tcon.
All multiuser sessions, however, will inherit ->dfs_root_ses from
master tcon, so match it instead.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make the write RPC tracepoints use the same trace macro complexes as the
read tracepoints and display the netfs request and subrequest IDs where
available (see commit 519be98971 "cifs: Add a tracepoint to track credits
involved in R/W requests").
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The DFS interlinks point to different DFS namespaces so make sure to
use the correct DFS root server to chase any DFS links under it by
storing the SMB session in dfs_ref_walk structure and then using it on
every referral walk.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Purge cached referrals that have a single target when reaching maximum
of cache size as the client won't need them to failover. Otherwise
remove oldest cache entry.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Do not mark tcons for reconnect when current connection matches any of
the targets returned by new referral even when there is no cached
entry.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
-----BEGIN PGP SIGNATURE-----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=B6Et
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- cleanups (moving duplicated code, removing unused code etc)
- fixes relating to "sfu" mount options (for better handling special
file types)
- SMB3.1.1 compression fixes/improvements
* tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: fix compression heuristic functions
cifs: Update SFU comments about fifos and sockets
cifs: Add support for creating SFU symlinks
smb: use LIST_HEAD() to simplify code
cifs: Recognize SFU socket type
cifs: Show debug message when SFU Fifo type was detected
cifs: Put explicit zero byte into SFU block/char types
cifs: Add support for reading SFU symlink location
cifs: Fix recognizing SFU symlinks
smb: client: compress: fix an "illegal accesses" issue
smb: client: compress: fix a potential issue of freeing an invalid pointer
smb: client: compress: LZ77 code improvements cleanup
smb: client: insert compression check/call on write requests
smb3: mark compression as CONFIG_EXPERIMENTAL and fix missing compression operation
cifs: Remove obsoleted declaration for cifs_dir_open
smb: client: Use min() macro
cifs: convert to use ERR_CAST()
smb: add comment to STATUS_MCA_OCCURED
smb: move SMB2 Status code to common header file
smb: move some duplicate definitions to common/smbacl.h
...
Change is_compressible() return type to bool, use WARN_ON_ONCE(1) for
internal errors and return false for those.
Renames:
check_repeated_data -> has_repeated_data
check_ascii_bytes -> is_mostly_ascii (also refactor into a single loop)
calc_shannon_entropy -> has_low_entropy
Also wraps "wreq->Length" in le32_to_cpu() in should_compress() (caught
by sparse).
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In SFU mode, activated by -o sfu mount option is now also support for
creating new fifos and sockets.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linux cifs client can already detect SFU symlinks and reads it content
(target location). But currently is not able to create new symlink. So
implement this missing support.
When 'sfu' mount option is specified and 'mfsymlinks' is not specified then
create new symlinks in SFU-style. This will provide full SFU compatibility
of symlinks when mounting cifs share with 'sfu' option. 'mfsymlinks' option
override SFU for better Apple compatibility as explained in fs_context.c
file in smb3_update_mnt_flags() function.
Extend __cifs_sfu_make_node() function, which now can handle also S_IFLNK
type and refactor structures passed to sync_write() in this function, by
splitting SFU type and SFU data from original combined struct win_dev as
combined fixed-length struct cannot be used for variable-length symlinks.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix an upstream merge resolution issue[1]. The NETFS_SREQ_HIT_EOF flag,
and code to set it, got added via two different paths. The original path
saw it added in the netfslib read improvements[2], but it was also added,
and slightly differently, in a fix that was committed before v6.11:
1da29f2c39
netfs, cifs: Fix handling of short DIO read
However, the code added to smb2_readv_callback() to set the flag in didn't
get removed when the netfs read improvements series was rebased to take
account of the cifs fixes. The proposed merge resolution[2] deleted it
rather than rebase the patches.
Fix this by removing the redundant lines. Code to set the bit that derives
from the fix patch is still there, a few lines above in the source.
Fixes: 35219bc5c7 ("Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAHk-=wjr8fxk20-wx=63mZruW1LTvBvAKya1GQ1EhyzXb-okMA@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-fsdevel/20240913-vfs-netfs-39ef6f974061@brauner/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an upstream merge resolution issue[1]. Prior to the netfs read
healpers, the SMB1 asynchronous read callback, cifs_readv_worker()
performed the cleanup for the operation in the network message processing
loop, potentially slowing down the processing of incoming SMB messages.
With commit a68c74865f ("cifs: Fix SMB1 readv/writev callback in the same
way as SMB2/3"), this was moved to a worker thread (as is done in the
SMB2/3 transport variant). However, the "was_async" argument to
netfs_subreq_terminated (which was originally incorrectly "false" got
flipped to "true" - which was then incorrect because, being in a kernel
thread, it's not in an async context).
This got corrected in the sample merge[2], but Linus, not unreasonably,
switched it back to its previous value.
Note that this value tells netfslib whether or not it can run sleepable
stuff or stuff that takes a long time, such as retries and cleanups, in the
calling thread, or whether it should offload to a worker thread.
Fix this so that it is "false". The callback to netfslib in both SMB1 and
SMB2/3 now gets offloaded from the network message thread to a separate
worker thread and thus it's fine to do the slow work in this thread.
Fixes: 35219bc5c7 ("Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAHk-=wjr8fxk20-wx=63mZruW1LTvBvAKya1GQ1EhyzXb-okMA@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-fsdevel/20240913-vfs-netfs-39ef6f974061@brauner/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
onQWAQD6IxAKPU0zom2FoWNilvSzPs7WglTtvddX9pu/lT1RNAD/YC/wOLW8mvAv
9oTAmigQDQQhEWdJA9RgLZBiw7k+DAw=
=zWFb
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). No functional impact.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU since its (first) version 3.0 supports AF_LOCAL sockets and stores them
on filesytem as system file with one zero byte. Add support for detecting
this SFU socket type into cifs_sfu_type() function.
With this change cifs_sfu_type() would correctly detect all special file
types created by SFU: fifo, socket, symlink, block and char.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For debugging purposes it is a good idea to show detected SFU type also for
Fifo. Debug message is already print for all other special types.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU types IntxCHR and IntxBLK are 8 bytes with zero as last byte. Make it
explicit in memcpy and memset calls, so the zero byte is visible in the
code (and not hidden as string trailing nul byte).
It is important for reader to show the last byte for block and char types
because it differs from the last byte of symlink type (which has it 0x01).
Also it is important to show that the type is not nul-term string, but
rather 8 bytes (with some printable bytes).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently when sfu mount option is specified then CIFS can recognize SFU
symlink, but is not able to read symlink target location. readlink()
syscall just returns that operation is not supported.
Implement this missing functionality in cifs_sfu_type() function. Read
target location of SFU-style symlink, parse it and fill into fattr's
cf_symlink_target member.
SFU-style symlink is file which has system attribute set and file content
is buffer "IntxLNK\1" (8th byte is 0x01) followed by the target location
encoded in little endian UCS-2/UTF-16. This format was introduced in
Interix 3.0 subsystem, as part of the Microsoft SFU 3.0 and is used also by
all later versions. Previous versions had no symlink support.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU symlinks have 8 byte prefix: "IntxLNK\1".
So check also the last 8th byte 0x01.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
