Commit Graph

498 Commits

Author SHA1 Message Date
Linus Torvalds
e4bc13adfd Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block
Pull cgroup writeback support from Jens Axboe:
 "This is the big pull request for adding cgroup writeback support.

  This code has been in development for a long time, and it has been
  simmering in for-next for a good chunk of this cycle too.  This is one
  of those problems that has been talked about for at least half a
  decade, finally there's a solution and code to go with it.

  Also see last weeks writeup on LWN:

        http://lwn.net/Articles/648292/"

* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
  writeback, blkio: add documentation for cgroup writeback support
  vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
  writeback: do foreign inode detection iff cgroup writeback is enabled
  v9fs: fix error handling in v9fs_session_init()
  bdi: fix wrong error return value in cgwb_create()
  buffer: remove unusued 'ret' variable
  writeback: disassociate inodes from dying bdi_writebacks
  writeback: implement foreign cgroup inode bdi_writeback switching
  writeback: add lockdep annotation to inode_to_wb()
  writeback: use unlocked_inode_to_wb transaction in inode_congested()
  writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
  writeback: implement [locked_]inode_to_wb_and_lock_list()
  writeback: implement foreign cgroup inode detection
  writeback: make writeback_control track the inode being written back
  writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
  mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
  writeback: implement memcg writeback domain based throttling
  writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
  writeback: implement memcg wb_domain
  writeback: update wb_over_bg_thresh() to use wb_domain aware operations
  ...
2015-06-25 16:00:17 -07:00
Jens Axboe
ae994ea972 cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
Commit 9470e4a693 only covered the initial bug report, there are
other spots in CFQ where we need to check that we actually have
a valid cfq_group_data structure.

Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data")
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-20 10:26:50 -06:00
Jens Axboe
9470e4a693 cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
If none of the devices in the system are using CFQ, then attempting to
read:

/sys/fs/cgroup/blkio/blkio.leaf_weight

will results in a NULL dereference. Check for a valid cfq_group_data
struct before attempting to dereference it.

Reported-by: Andrey Wagin <avagin@gmail.com>
Fixes: e48453c3 ("block, cgroup: implement policy-specific per-blkcg data")
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-19 10:19:36 -06:00
Jens Axboe
4ceab71b9d cfq-iosched: move group scheduling functions under ifdef
If CFQ_GROUP_IOSCHED is not set, the compiler produces the
following warning:

  CC      block/cfq-iosched.o
  linux/block/cfq-iosched.c:469:2:
    warning: 'cpd_to_cfqgd' defined but not used [-Wunused-function]
    *cpd_to_cfqgd(struct blkcg_policy_data *cpd)
     ^

In reality, two other lookup functions aren't used either if
CFQ_GROUP_IOSCHED isn't set. Move all three under one of the
CFQ_GROUP_IOSCHED sections in the code.

Reported-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-19 10:13:01 -06:00
Jens Axboe
0bb979472a cfq-iosched: fix the setting of IOPS mode on SSDs
A previous commit wanted to make CFQ default to IOPS mode on
non-rotational storage, however it did so when the queue was
initialized and the non-rotational flag is only set later on
in the probe.

Add an elevator hook that gets called off the add_disk() path,
at that point we know that feature probing has finished, and
we can reliably check for the various flags that drivers can
set.

Fixes: 41c0126b ("block: Make CFQ default to IOPS mode on SSDs")
Tested-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-10 08:01:20 -06:00
Arianna Avanzini
e48453c386 block, cgroup: implement policy-specific per-blkcg data
The block IO (blkio) controller enables the block layer to provide service
guarantees in a hierarchical fashion. Specifically, service guarantees
are provided by registered request-accounting policies. As of now, a
proportional-share and a throttling policy are available. They are
implemented, respectively, by the CFQ I/O scheduler and the blk-throttle
subsystem. Unfortunately, as for adding new policies, the current
implementation of the block IO controller is only halfway ready to allow
new policies to be plugged in. This commit provides a solution to make
the block IO controller fully ready to handle new policies.
In what follows, we first describe briefly the current state, and then
list the changes made by this commit.

The throttling policy does not need any per-cgroup information to perform
its task. In contrast, the proportional share policy uses, for each cgroup,
both the weight assigned by the user to the cgroup, and a set of dynamically-
computed weights, one for each device.

The first, user-defined weight is stored in the blkcg data structure: the
block IO controller allocates a private blkcg data structure for each
cgroup in the blkio cgroups hierarchy (regardless of which policy is active).
In other words, the block IO controller internally mirrors the blkio cgroups
with private blkcg data structures.

On the other hand, for each cgroup and device, the corresponding dynamically-
computed weight is maintained in the following, different way. For each device,
the block IO controller keeps a private blkcg_gq structure for each cgroup in
blkio. In other words, block IO also keeps one private mirror copy of the blkio
cgroups hierarchy for each device, made of blkcg_gq structures.
Each blkcg_gq structure keeps per-policy information in a generic array of
dynamically-allocated 'dedicated' data structures, one for each registered
policy (so currently the array contains two elements). To be inserted into the
generic array, each dedicated data structure embeds a generic blkg_policy_data
structure. Consider now the array contained in the blkcg_gq structure
corresponding to a given pair of cgroup and device: one of the elements
of the array contains the dedicated data structure for the proportional-share
policy, and this dedicated data structure contains the dynamically-computed
weight for that pair of cgroup and device.

The generic strategy adopted for storing per-policy data in blkcg_gq structures
is already capable of handling new policies, whereas the one adopted with blkcg
structures is not, because per-policy data are hard-coded in the blkcg
structures themselves (currently only data related to the proportional-
share policy).

This commit addresses the above issues through the following changes:
. It generalizes blkcg structures so that per-policy data are stored in the same
  way as in blkcg_gq structures.
  Specifically, it lets also the blkcg structure store per-policy data in a
  generic array of dynamically-allocated dedicated data structures. We will
  refer to these data structures as blkcg dedicated data structures, to
  distinguish them from the dedicated data structures inserted in the generic
  arrays kept by blkcg_gq structures.
  To allow blkcg dedicated data structures to be inserted in the generic array
  inside a blkcg structure, this commit also introduces a new blkcg_policy_data
  structure, which is the equivalent of blkg_policy_data for blkcg dedicated
  data structures.
. It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a
  cpd_size field and a cpd_init field, to be initialized by the policy with,
  respectively, the size of the blkcg dedicated data structures, and the
  address of a constructor function for blkcg dedicated data structures.
. It moves the CFQ-specific fields embedded in the blkcg data structure (i.e.,
  the fields related to the proportional-share policy), into a new blkcg
  dedicated data structure called cfq_group_data.

Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-07 08:10:08 -06:00
Tahsin Erdogan
41c0126b3f block: Make CFQ default to IOPS mode on SSDs
CFQ idling causes reduced IOPS throughput on non-rotational disks.
Since disk head seeking is not applicable to SSDs, it doesn't really
help performance by anticipating future near-by IO requests.

By turning off idling (and switching to IOPS mode), we allow other
processes to dispatch IO requests down to the driver and so increase IO
throughput.

Following FIO benchmark results were taken on a cloud SSD offering with
idling on and off:

Idling     iops    avg-lat(ms)    stddev            bw
------------------------------------------------------
    On     7054    90.107         38.697     28217KB/s
   Off    29255    21.836         11.730    117022KB/s

fio --name=temp --size=100G --time_based --ioengine=libaio \
    --randrepeat=0 --direct=1 --invalidate=1 --verify=0 \
    --verify_fatal=0 --rw=randread --blocksize=4k --group_reporting=1 \
    --filename=/dev/sdb --runtime=10 --iodepth=64 --numjobs=10

And the following is from a local SSD run:

Idling     iops    avg-lat(ms)    stddev            bw
------------------------------------------------------
    On    19320    33.043         14.068     77281KB/s
   Off    21626    29.465         12.662     86507KB/s

fio --name=temp --size=5G --time_based --ioengine=libaio \
    --randrepeat=0 --direct=1 --invalidate=1 --verify=0 \
    --verify_fatal=0 --rw=randread --blocksize=4k --group_reporting=1 \
    --filename=/fio_data --runtime=10 --iodepth=64 --numjobs=10

Reviewed-by: Nauman Rafique <nauman@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-05 19:21:15 -06:00
Tejun Heo
eea8f41cc5 blkcg: move block/blk-cgroup.h to include/linux/blk-cgroup.h
cgroup aware writeback support will require exposing some of blkcg
details.  In preprataion, move block/blk-cgroup.h to
include/linux/blk-cgroup.h.  This patch is pure file move.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:33:33 -06:00
Konstantin Khlebnikov
69abaffec7 cfq-iosched: handle failure of cfq group allocation
Cfq_lookup_create_cfqg() allocates struct blkcg_gq using GFP_ATOMIC.
In cfq_find_alloc_queue() possible allocation failure is not handled.
As a result kernel oopses on NULL pointer dereference when
cfq_link_cfqq_cfqg() calls cfqg_get() for NULL pointer.

Bug was introduced in v3.5 in commit cd1604fab4 ("blkcg: factor
out blkio_group creation"). Prior to that commit cfq group lookup
had returned pointer to root group as fallback.

This patch handles this error using existing fallback oom_cfqq.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: cd1604fab4 ("blkcg: factor out blkio_group creation")
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-09 10:22:39 -07:00
Jeff Moyer
c6ce194325 cfq-iosched: fix incorrect filing of rt async cfqq
Hi,

If you can manage to submit an async write as the first async I/O from
the context of a process with realtime scheduling priority, then a
cfq_queue is allocated, but filed into the wrong async_cfqq bucket.  It
ends up in the best effort array, but actually has realtime I/O
scheduling priority set in cfqq->ioprio.

The reason is that cfq_get_queue assumes the default scheduling class and
priority when there is no information present (i.e. when the async cfqq
is created):

static struct cfq_queue *
cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic,
	      struct bio *bio, gfp_t gfp_mask)
{
	const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
	const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio);

cic->ioprio starts out as 0, which is "invalid".  So, class of 0
(IOPRIO_CLASS_NONE) is passed to cfq_async_queue_prio like so:

		async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio);

static struct cfq_queue **
cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio)
{
        switch (ioprio_class) {
        case IOPRIO_CLASS_RT:
                return &cfqd->async_cfqq[0][ioprio];
        case IOPRIO_CLASS_NONE:
                ioprio = IOPRIO_NORM;
                /* fall through */
        case IOPRIO_CLASS_BE:
                return &cfqd->async_cfqq[1][ioprio];
        case IOPRIO_CLASS_IDLE:
                return &cfqd->async_idle_cfqq;
        default:
                BUG();
        }
}

Here, instead of returning a class mapped from the process' scheduling
priority, we get back the bucket associated with IOPRIO_CLASS_BE.

Now, there is no queue allocated there yet, so we create it:

		cfqq = cfq_find_alloc_queue(cfqd, is_sync, cic, bio, gfp_mask);

That function ends up doing this:

			cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
			cfq_init_prio_data(cfqq, cic);

cfq_init_cfqq marks the priority as having changed.  Then, cfq_init_prio
data does this:

	ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
	switch (ioprio_class) {
	default:
		printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class);
	case IOPRIO_CLASS_NONE:
		/*
		 * no prio set, inherit CPU scheduling settings
		 */
		cfqq->ioprio = task_nice_ioprio(tsk);
		cfqq->ioprio_class = task_nice_ioclass(tsk);
		break;

So we basically have two code paths that treat IOPRIO_CLASS_NONE
differently, which results in an RT async cfqq filed into a best effort
bucket.

Attached is a patch which fixes the problem.  I'm not sure how to make
it cleaner.  Suggestions would be welcome.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-21 10:38:30 -07:00
Jens Axboe
b207892b06 Merge branch 'for-linus' into for-3.18/core
A bit of churn on the for-linus side that would be nice to have
in the core bits for 3.18, so pull it in to catch us up and make
forward progress easier.

Signed-off-by: Jens Axboe <axboe@fb.com>

Conflicts:
	block/scsi_ioctl.c
2014-09-11 09:31:18 -06:00
Tejun Heo
f4da80727c blkcg: remove blkcg->id
blkcg->id is a unique id given to each blkcg; however, the
cgroup_subsys_state which each blkcg embeds already has ->serial_nr
which can be used for the same purpose.  Drop blkcg->id and replace
its uses with blkcg->css.serial_nr.  Rename cfq_cgroup->blkcg_id to
->blkcg_serial_nr and @id in check_blkcg_changed() to @serial_nr for
consistency.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-08 09:55:37 -06:00
Toshiaki Makita
7b5af5cffc cfq-iosched: Add comments on update timing of weight
Explain that weight has to be updated on activation.
This complements previous fix e15693ef18 ("cfq-iosched: Fix wrong
children_weight calculation").

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-28 08:16:29 -06:00
Toshiaki Makita
e15693ef18 cfq-iosched: Fix wrong children_weight calculation
cfq_group_service_tree_add() is applying new_weight at the beginning of
the function via cfq_update_group_weight().
This actually allows weight to change between adding it to and subtracting
it from children_weight, and triggers WARN_ON_ONCE() in
cfq_group_service_tree_del(), or even causes oops by divide error during
vfr calculation in cfq_group_service_tree_add().

The detailed scenario is as follows:
1. Create blkio cgroups X and Y as a child of X.
   Set X's weight to 500 and perform some I/O to apply new_weight.
   This X's I/O completes before starting Y's I/O.
2. Y starts I/O and cfq_group_service_tree_add() is called with Y.
3. cfq_group_service_tree_add() walks up the tree during children_weight
   calculation and adds parent X's weight (500) to children_weight of root.
   children_weight becomes 500.
4. Set X's weight to 1000.
5. X starts I/O and cfq_group_service_tree_add() is called with X.
6. cfq_group_service_tree_add() applies its new_weight (1000).
7. I/O of Y completes and cfq_group_service_tree_del() is called with Y.
8. I/O of X completes and cfq_group_service_tree_del() is called with X.
9. cfq_group_service_tree_del() subtracts X's weight (1000) from
   children_weight of root. children_weight becomes -500.
   This triggers WARN_ON_ONCE().
10. Set X's weight to 500.
11. X starts I/O and cfq_group_service_tree_add() is called with X.
12. cfq_group_service_tree_add() applies its new_weight (500) and adds it
    to children_weight of root. children_weight becomes 0. Calcularion of
    vfr triggers oops by divide error.

weight should be updated right before adding it to children_weight.

Reported-by: Ruki Sekiya <sekiya.ruki@lab.ntt.co.jp>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-26 10:17:30 -06:00
Linus Torvalds
14208b0ec5 Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "A lot of activities on cgroup side.  Heavy restructuring including
  locking simplification took place to improve the code base and enable
  implementation of the unified hierarchy, which currently exists behind
  a __DEVEL__ mount option.  The core support is mostly complete but
  individual controllers need further work.  To explain the design and
  rationales of the the unified hierarchy

        Documentation/cgroups/unified-hierarchy.txt

  is added.

  Another notable change is css (cgroup_subsys_state - what each
  controller uses to identify and interact with a cgroup) iteration
  update.  This is part of continuing updates on css object lifetime and
  visibility.  cgroup started with reference count draining on removal
  way back and is now reaching a point where csses behave and are
  iterated like normal refcnted objects albeit with some complexities to
  allow distinguishing the state where they're being deleted.  The css
  iteration update isn't taken advantage of yet but is planned to be
  used to simplify memcg significantly"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (77 commits)
  cgroup: disallow disabled controllers on the default hierarchy
  cgroup: don't destroy the default root
  cgroup: disallow debug controller on the default hierarchy
  cgroup: clean up MAINTAINERS entries
  cgroup: implement css_tryget()
  device_cgroup: use css_has_online_children() instead of has_children()
  cgroup: convert cgroup_has_live_children() into css_has_online_children()
  cgroup: use CSS_ONLINE instead of CGRP_DEAD
  cgroup: iterate cgroup_subsys_states directly
  cgroup: introduce CSS_RELEASED and reduce css iteration fallback window
  cgroup: move cgroup->serial_nr into cgroup_subsys_state
  cgroup: link all cgroup_subsys_states in their sibling lists
  cgroup: move cgroup->sibling and ->children into cgroup_subsys_state
  cgroup: remove cgroup->parent
  device_cgroup: remove direct access to cgroup->children
  memcg: update memcg_has_children() to use css_next_child()
  memcg: remove tasks/children test from mem_cgroup_force_empty()
  cgroup: remove css_parent()
  cgroup: skip refcnting on normal root csses and cgrp_dfl_root self css
  cgroup: use cgroup->self.refcnt for cgroup refcnting
  ...
2014-06-09 15:03:33 -07:00
Tejun Heo
451af504df cgroup: replace cftype->write_string() with cftype->write()
Convert all cftype->write_string() users to the new cftype->write()
which maps directly to kernfs write operation and has full access to
kernfs and cgroup contexts.  The conversions are mostly mechanical.

* @css and @cft are accessed using of_css() and of_cft() accessors
  respectively instead of being specified as arguments.

* Should return @nbytes on success instead of 0.

* @buf is not trimmed automatically.  Trim if necessary.  Note that
  blkcg and netprio don't need this as the parsers already handle
  whitespaces.

cftype->write_string() has no user left after the conversions and
removed.

While at it, remove unnecessary local variable @p in
cgroup_subtree_control_write() and stale comment about
CGROUP_LOCAL_BUFFER_SIZE in cgroup_freezer.c.

This patch doesn't introduce any visible behavior changes.

v2: netprio was missing from conversion.  Converted.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
2014-05-13 12:16:21 -04:00
Masanari Iida
176167ad9e block: Fix format string mismatch in cfq-iosched.c
Fix format string mismatch in cfq_var_show()

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 15:56:10 -06:00
Jens Axboe
59c3d45e48 block: remove 'q' parameter from kblockd_schedule_*_work()
The queue parameter is never used, just get rid of it.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-09 10:17:00 -06:00
Linus Torvalds
32d01dc7be Merge branch 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "A lot updates for cgroup:

   - The biggest one is cgroup's conversion to kernfs.  cgroup took
     after the long abandoned vfs-entangled sysfs implementation and
     made it even more convoluted over time.  cgroup's internal objects
     were fused with vfs objects which also brought in vfs locking and
     object lifetime rules.  Naturally, there are places where vfs rules
     don't fit and nasty hacks, such as credential switching or lock
     dance interleaving inode mutex and cgroup_mutex with object serial
     number comparison thrown in to decide whether the operation is
     actually necessary, needed to be employed.

     After conversion to kernfs, internal object lifetime and locking
     rules are mostly isolated from vfs interactions allowing shedding
     of several nasty hacks and overall simplification.  This will also
     allow implmentation of operations which may affect multiple cgroups
     which weren't possible before as it would have required nesting
     i_mutexes.

   - Various simplifications including dropping of module support,
     easier cgroup name/path handling, simplified cgroup file type
     handling and task_cg_lists optimization.

   - Prepatory changes for the planned unified hierarchy, which is still
     a patchset away from being actually operational.  The dummy
     hierarchy is updated to serve as the default unified hierarchy.
     Controllers which aren't claimed by other hierarchies are
     associated with it, which BTW was what the dummy hierarchy was for
     anyway.

   - Various fixes from Li and others.  This pull request includes some
     patches to add missing slab.h to various subsystems.  This was
     triggered xattr.h include removal from cgroup.h.  cgroup.h
     indirectly got included a lot of files which brought in xattr.h
     which brought in slab.h.

  There are several merge commits - one to pull in kernfs updates
  necessary for converting cgroup (already in upstream through
  driver-core), others for interfering changes in the fixes branch"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (74 commits)
  cgroup: remove useless argument from cgroup_exit()
  cgroup: fix spurious lockdep warning in cgroup_exit()
  cgroup: Use RCU_INIT_POINTER(x, NULL) in cgroup.c
  cgroup: break kernfs active_ref protection in cgroup directory operations
  cgroup: fix cgroup_taskset walking order
  cgroup: implement CFTYPE_ONLY_ON_DFL
  cgroup: make cgrp_dfl_root mountable
  cgroup: drop const from @buffer of cftype->write_string()
  cgroup: rename cgroup_dummy_root and related names
  cgroup: move ->subsys_mask from cgroupfs_root to cgroup
  cgroup: treat cgroup_dummy_root as an equivalent hierarchy during rebinding
  cgroup: remove NULL checks from [pr_cont_]cgroup_{name|path}()
  cgroup: use cgroup_setup_root() to initialize cgroup_dummy_root
  cgroup: reorganize cgroup bootstrapping
  cgroup: relocate setting of CGRP_DEAD
  cpuset: use rcu_read_lock() to protect task_cs()
  cgroup_freezer: document freezer_fork() subtleties
  cgroup: update cgroup_transfer_tasks() to either succeed or fail
  cgroup: drop task_lock() protection around task->cgroups
  cgroup: update how a newly forked task gets associated with css_set
  ...
2014-04-03 13:05:42 -07:00
Tejun Heo
4d3bb511b5 cgroup: drop const from @buffer of cftype->write_string()
cftype->write_string() just passes on the writeable buffer from kernfs
and there's no reason to add const restriction on the buffer.  The
only thing const achieves is unnecessarily complicating parsing of the
buffer.  Drop const from @buffer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>                                           
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
2014-03-19 10:23:54 -04:00
Jan Kara
8b4922d317 block: Stop abusing csd.list for fifo_time
Block layer currently abuses rq->csd.list.next for storing fifo_time.
That is a terrible hack and completely unnecessary as well. Union
achieves the same space saving in a cleaner way.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:46:32 -08:00
Tejun Heo
5f46990787 cgroup: update the meaning of cftype->max_write_len
cftype->max_write_len is used to extend the maximum size of writes.
It's interpreted in such a way that the actual maximum size is one
less than the specified value.  The default size is defined by
CGROUP_LOCAL_BUFFER_SIZE.  Its interpretation is quite confusing - its
value is decremented by 1 and then compared for equality with max
size, which means that the actual default size is
CGROUP_LOCAL_BUFFER_SIZE - 2, which is 62 chars.

There's no point in having a limit that low.  Update its definition so
that it means the actual string length sans termination and anything
below PAGE_SIZE-1 is treated as PAGE_SIZE-1.

.max_write_len for "release_agent" is updated to PATH_MAX-1 and
cgroup_release_agent_write() is updated so that the redundant strlen()
check is removed and it uses strlcpy() instead of strcpy().
.max_write_len initializations in blk-throttle.c and cfq-iosched.c are
no longer necessary and removed.  The one in cpuset is kept unchanged
as it's an approximated value to begin with.

This will also make transition to kernfs smoother.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2014-02-11 11:52:48 -05:00
Tejun Heo
2da8ca822d cgroup: replace cftype->read_seq_string() with cftype->seq_show()
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs.  This patch
replaces cftype->read_seq_string() with cftype->seq_show() which is
not limited to single_open() operation and will map directcly to
kernfs seq_file interface.

The conversions are mechanical.  As ->seq_show() doesn't have @css and
@cft, the functions which make use of them are converted to use
seq_css() and seq_cft() respectively.  In several occassions, e.f. if
it has seq_string in its name, the function name is updated to fit the
new method better.

This patch does not introduce any behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
2013-12-05 12:28:04 -05:00
Peter Zijlstra
90d3839b90 block: Use u64_stats_init() to initialize seqcounts
Now that seqcounts are lockdep enabled objects, we need to explicitly
initialize runtime allocated seqcounts so that lockdep can track them.

Without this patch, Fengguang was seeing:

  [    4.127282] INFO: trying to register non-static key.
  [    4.128027] the code is fine but needs lockdep annotation.
  [    4.128027] turning off the locking correctness validator.
  [    4.128027] CPU: 0 PID: 96 Comm: kworker/u4:1 Not tainted 3.12.0-next-20131108-10601-gbad570d #2
  [    4.128027] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  [    ...     ]
  [    4.128027] Call Trace:
  [    4.128027]  [<7908e744>] ? console_unlock+0x353/0x380
  [    4.128027]  [<79dc7cf2>] dump_stack+0x48/0x60
  [    4.128027]  [<7908953e>] __lock_acquire.isra.26+0x7e3/0xceb
  [    4.128027]  [<7908a1c5>] lock_acquire+0x71/0x9a
  [    4.128027]  [<794079aa>] ? blk_throtl_bio+0x1c3/0x485
  [    4.128027]  [<7940658b>] throtl_update_dispatch_stats+0x7c/0x153
  [    4.128027]  [<794079aa>] ? blk_throtl_bio+0x1c3/0x485
  [    4.128027]  [<794079aa>] blk_throtl_bio+0x1c3/0x485
  ...

Use u64_stats_init() for all affected data structures, which initializes
the seqcount.

Reported-and-Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ Folded in another fix from the mailing list as well as a fix to that fix. Tweaked commit message. ]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1384314134-6895-1-git-send-email-john.stultz@linaro.org
[ So I actually think that the two SOBs from PeterZ are the right depiction of the patch route. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 13:54:08 +01:00
Linus Torvalds
68cf8d0c72 Merge branch 'for-3.12/core' of git://git.kernel.dk/linux-block
Pull block IO fixes from Jens Axboe:
 "After merge window, no new stuff this time only a collection of neatly
  confined and simple fixes"

* 'for-3.12/core' of git://git.kernel.dk/linux-block:
  cfq: explicitly use 64bit divide operation for 64bit arguments
  block: Add nr_bios to block_rq_remap tracepoint
  If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up.
  bio-integrity: Fix use of bs->bio_integrity_pool after free
  blkcg: relocate root_blkg setting and clearing
  block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
  block: trace all devices plug operation
2013-09-22 15:00:11 -07:00
Anatol Pomozov
f3cff25f05 cfq: explicitly use 64bit divide operation for 64bit arguments
'samples' is 64bit operant, but do_div() second parameter is 32.
do_div silently truncates high 32 bits and calculated result
is invalid.

In case if low 32bit of 'samples' are zeros then do_div() produces
kernel crash.

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-22 12:43:47 -06:00
Joe Perches
c1b511eb21 block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
Use the helper function instead of __GFP_ZERO.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-11 13:22:03 -06:00
Tejun Heo
182446d087 cgroup: pass around cgroup_subsys_state instead of cgroup in file methods
cgroup is currently in the process of transitioning to using struct
cgroup_subsys_state * as the primary handle instead of struct cgroup.
Please see the previous commit which converts the subsystem methods
for rationale.

This patch converts all cftype file operations to take @css instead of
@cgroup.  cftypes for the cgroup core files don't have their subsytem
pointer set.  These will automatically use the dummy_css added by the
previous patch and can be converted the same way.

Most subsystem conversions are straight forwards but there are some
interesting ones.

* freezer: update_if_frozen() is also converted to take @css instead
  of @cgroup for consistency.  This will make the code look simpler
  too once iterators are converted to use css.

* memory/vmpressure: mem_cgroup_from_css() needs to be exported to
  vmpressure while mem_cgroup_from_cont() can be made static.
  Updated accordingly.

* cpu: cgroup_tg() doesn't have any user left.  Removed.

* cpuacct: cgroup_ca() doesn't have any user left.  Removed.

* hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left.
  Removed.

* net_cls: cgrp_cls_state() doesn't have any user left.  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-08 20:11:24 -04:00
Jianpeng Ma
d50235b7bc elevator: Fix a race in elevator switching
There's a race between elevator switching and normal io operation.
    Because the allocation of struct elevator_queue and struct elevator_data
    don't in a atomic operation.So there are have chance to use NULL
    ->elevator_data.
    For example:
        Thread A:                               Thread B
        blk_queu_bio                            elevator_switch
        spin_lock_irq(q->queue_block)           elevator_alloc
        elv_merge                               elevator_init_fn

    Because call elevator_alloc, it can't hold queue_lock and the
    ->elevator_data is NULL.So at the same time, threadA call elv_merge and
    nedd some info of elevator_data.So the crash happened.

    Move the elevator_alloc into func elevator_init_fn, it make the
    operations in a atomic operation.

    Using the follow method can easy reproduce this bug
    1:dd if=/dev/sdb of=/dev/null
    2:while true;do echo noop > scheduler;echo deadline > scheduler;done

    The test method also use this method.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-07-03 13:25:24 +02:00
Kent Overstreet
f73a1c7d11 block: Add bio_end_sector()
Just a little convenience macro - main reason to add it now is preparing
for immutable bio vecs, it'll reduce the size of the patch that puts
bi_sector/bi_size/bi_idx into a struct bvec_iter.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Lars Ellenberg <drbd-dev@lists.linbit.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Alasdair Kergon <agk@redhat.com>
CC: dm-devel@redhat.com
CC: Neil Brown <neilb@suse.de>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: linux-s390@vger.kernel.org
CC: Chris Mason <chris.mason@fusionio.com>
CC: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2013-03-23 14:15:29 -07:00
Linus Torvalds
ee89f81252 Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...
2013-02-28 12:52:24 -08:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Glauber Costa
a3cc86c2f0 cfq: fix lock imbalance with failed allocations
While stress-running very-small container scenarios with the Kernel Memory
Controller, I've run into a lockdep-detected lock imbalance in
cfq-iosched.c.

I'll apologize beforehand for not posting a backlog: I didn't anticipate
it would be so hard to reproduce, so I didn't save my serial output and
went directly on debugging.  Turns out that it did not happen again in
more than 20 runs, making it a quite rare pattern.

But here is my analysis:

When we are in very low-memory situations, we will arrive at
cfq_find_alloc_queue and may not find a queue, having to resort to the oom
queue, in an rcu-locked condition:

  if (!cfqq || cfqq == &cfqd->oom_cfqq)
      [ ... ]

Next, we will release the rcu lock, and try to allocate a queue, retrying
if we succeed:

  rcu_read_unlock();
  spin_unlock_irq(cfqd->queue->queue_lock);
  new_cfqq = kmem_cache_alloc_node(cfq_pool,
                  gfp_mask | __GFP_ZERO,
                  cfqd->queue->node);
   spin_lock_irq(cfqd->queue->queue_lock);
   if (new_cfqq)
       goto retry;

We are unlocked at this point, but it should be fine, since we will
reacquire the rcu_read_lock when we retry.

Except of course, that we may not retry: the allocation may very well fail
and we'll keep on going through the flow:

The next branch is:

    if (cfqq) {
	[ ... ]
    } else
        cfqq = &cfqd->oom_cfqq;

And right before exiting, we'll issue rcu_read_unlock().

Being already unlocked, this is the likely source of our imbalance.  Since
cfqq is either already NULL or made NULL in the first statement of the
outter branch, the only viable alternative here seems to be to return the
oom queue right away in case of allocation failure.

Please review the following patch and apply if you agree with my analysis.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22 10:42:46 +01:00
Tejun Heo
43114018cb cfq-iosched: add hierarchical cfq_group statistics
Unfortunately, at this point, there's no way to make the existing
statistics hierarchical without creating nasty surprises for the
existing users.  Just create recursive counterpart of the existing
stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Tejun Heo
0b39920b5f cfq-iosched: collect stats from dead cfqgs
To support hierarchical stats, it's necessary to remember stats from
dead children.  Add cfqg->dead_stats and make a dying cfqg transfer
its stats to the parent's dead-stats.

The transfer happens form ->pd_offline_fn() and it is possible that
there are some residual IOs completing afterwards.  Currently, we lose
these stats.  Given that cgroup removal isn't a very high frequency
operation and the amount of residual IOs on offline are likely to be
nil or small, this shouldn't be a big deal and the complexity needed
to handle residual IOs - another callback and rather elaborate
synchronization to reach and lock the matching q - doesn't seem
justified.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Tejun Heo
689665af44 cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
Separate out cfqg_stats_reset() which takes struct cfqg_stats * from
cfq_pd_reset_stats() and move the latter to where other pd methods are
defined.  cfqg_stats_reset() will be used to implement hierarchical
stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Tejun Heo
4d5e80a760 blkcg: s/blkg_rwstat_sum()/blkg_rwstat_total()/
Rename blkg_rwstat_sum() to blkg_rwstat_total().  sum will be used for
summing up stats from multiple blkgs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:12 -08:00
Tejun Heo
d02f7aa8dc cfq-iosched: enable full blkcg hierarchy support
With the previous two patches, all cfqg scheduling decisions are based
on vfraction and ready for hierarchy support.  The only thing which
keeps the behavior flat is cfqg_flat_parent() which makes vfraction
calculation consider all non-root cfqgs children of the root cfqg.

Replace it with cfqg_parent() which returns the real parent.  This
enables full blkcg hierarchy support for cfq-iosched.  For example,
consider the following hierarchy.

        root
      /      \
   A:500      B:250
  /     \
 AA:500  AB:1000

For simplicity, let's say all the leaf nodes have active tasks and are
on service tree.  For each leaf node, vfraction would be

 AA: (500  / 1500) * (500 / 750) =~ 0.2222
 AB: (1000 / 1500) * (500 / 750) =~ 0.4444
  B:                 (250 / 750) =~ 0.3333

and vdisktime will be distributed accordingly.  For more detail,
please refer to Documentation/block/cfq-iosched.txt.

v2: cfq-iosched.txt updated to describe group scheduling as suggested
    by Vivek.

v3: blkio-controller.txt updated.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:11 -08:00
Tejun Heo
41cad6ab2c cfq-iosched: convert cfq_group_slice() to use cfqg->vfraction
cfq_group_slice() calculates slice by taking a fraction of
cfq_target_latency according to the ratio of cfqg->weight against
service_tree->total_weight.  This currently works only because all
cfqgs are treated to be at the same level.

To prepare for proper hierarchy support, convert cfq_group_slice() to
base the calculation on cfqg->vfraction.  As cfqg->vfraction is always
a fraction of 1 and represents the fraction allocated to the cfqg with
hierarchy considered, the slice can be simply calculated by
multiplying cfqg->vfraction to cfq_target_latency (with fixed point
shift factored in).

As vfraction calculation currently treats all non-root cfqgs as
children of the root cfqg, this patch doesn't introduce noticeable
behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:11 -08:00
Tejun Heo
1d3650f713 cfq-iosched: implement hierarchy-ready cfq_group charge scaling
Currently, cfqg charges are scaled directly according to cfqg->weight.
Regardless of the number of active cfqgs or the amount of active
weights, a given weight value always scales charge the same way.  This
works fine as long as all cfqgs are treated equally regardless of
their positions in the hierarchy, which is what cfq currently
implements.  It can't work in hierarchical settings because the
interpretation of a given weight value depends on where the weight is
located in the hierarchy.

This patch reimplements cfqg charge scaling so that it can be used to
support hierarchy properly.  The scheme is fairly simple and
light-weight.

* When a cfqg is added to the service tree, v(disktime)weight is
  calculated.  It walks up the tree to root calculating the fraction
  it has in the hierarchy.  At each level, the fraction can be
  calculated as

    cfqg->weight / parent->level_weight

  By compounding these, the global fraction of vdisktime the cfqg has
  claim to - vfraction - can be determined.

* When the cfqg needs to be charged, the charge is scaled inversely
  proportionally to the vfraction.

The new scaling scheme uses the same CFQ_SERVICE_SHIFT for fixed point
representation as before; however, the smallest scaling factor is now
1 (ie. 1 << CFQ_SERVICE_SHIFT).  This is different from before where 1
was for CFQ_WEIGHT_DEFAULT and higher weight would result in smaller
scaling factor.

While this shifts the global scale of vdisktime a bit, it doesn't
change the relative relationships among cfqgs and the scheduling
result isn't different.

cfq_group_notify_queue_add uses fixed CFQ_IDLE_DELAY when appending
new cfqg to the service tree.  The specific value of CFQ_IDLE_DELAY
didn't have any relevance to vdisktime before and is unlikely to cause
any visible behavior difference now especially as the scale shift
isn't that large.

As the new scheme now makes proper distinction between cfqg->weight
and ->leaf_weight, reverse the weight aliasing for root cfqgs.  For
root, both weights are now mapped to ->leaf_weight instead of the
other way around.

Because we're still using cfqg_flat_parent(), this patch shouldn't
change the scheduling behavior in any noticeable way.

v2: Beefed up comments on vfraction as requested by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:11 -08:00
Tejun Heo
7918ffb5b8 cfq-iosched: implement cfq_group->nr_active and ->children_weight
To prepare for blkcg hierarchy support, add cfqg->nr_active and
->children_weight.  cfqg->nr_active counts the number of active cfqgs
at the cfqg's level and ->children_weight is sum of weights of those
cfqgs.  The level covers itself (cfqg->leaf_weight) and immediate
children.

The two values are updated when a cfqg enters and leaves the group
service tree.  Unless the hierarchy is very deep, the added overhead
should be negligible.

Currently, the parent is determined using cfqg_flat_parent() which
makes the root cfqg the parent of all other cfqgs.  This is to make
the transition to hierarchy-aware scheduling gradual.  Scheduling
logic will be converted to use cfqg->children_weight without actually
changing the behavior.  When everything is ready,
blkcg_weight_parent() will be replaced with proper parent function.

This patch doesn't introduce any behavior chagne.

v2: s/cfqg->level_weight/cfqg->children_weight/ as per Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:11 -08:00
Tejun Heo
e71357e118 cfq-iosched: add leaf_weight
cfq blkcg is about to grow proper hierarchy handling, where a child
blkg's weight would nest inside the parent's.  This makes tasks in a
blkg to compete against both tasks in the sibling blkgs and the tasks
of child blkgs.

We're gonna use the existing weight as the group weight which decides
the blkg's weight against its siblings.  This patch introduces a new
weight - leaf_weight - which decides the weight of a blkg against the
child blkgs.

It's named leaf_weight because another way to look at it is that each
internal blkg nodes have a hidden child leaf node which contains all
its tasks and leaf_weight is the weight of the leaf node and handled
the same as the weight of the child blkgs.

This patch only adds leaf_weight fields and exposes it to userland.
The new weight isn't actually used anywhere yet.  Note that
cfq-iosched currently offcially supports only single level hierarchy
and root blkgs compete with the first level blkgs - ie. root weight is
basically being used as leaf_weight.  For root blkgs, the two weights
are kept in sync for backward compatibility.

v2: cfqd->root_group->leaf_weight initialization was missing from
    cfq_init_queue() causing divide by zero when
    !CONFIG_CFQ_GROUP_SCHED.  Fix it.  Reported by Fengguang.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
2013-01-09 08:05:10 -08:00
Vivek Goyal
b226e5c411 cfq-iosched: Print sync-noidle information in blktrace messages
Currently we attach a character "S" or "A" to the cfqq<pid>, to represent
whether queues is sync or async. Add one more character "N" to represent
whether it is sync-noidle queue or sync queue. So now three different
type of queues will look as follows.

cfq1234S   --> sync queus
cfq1234SN  --> sync noidle queue
cfq1234A   --> Async queue

Previously S/A classification was being printed only if group scheduling
was enabled. This patch also makes sure that this classification is
displayed even if group idling is disabled.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
1f23f12151 cfq-iosched: Get rid of unnecessary local variable
Use of local varibale "n" seems to be unnecessary. Remove it. This brings
it inline with function __cfq_group_st_add(), which is also doing the
similar operation of adding a group to a rb tree.

No functionality change here.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
6d816ec7c8 cfq-iosched: Rename few functions related to selecting workload
choose_service_tree() selects/sets both wl_class and wl_type.  Rename it to
choose_wl_class_and_type() to make it very clear.

cfq_choose_wl() only selects and sets wl_type. It is easy to confuse
it with choose_st(). So rename it to cfq_choose_wl_type() to make
it clear what does it do.

Just renaming. No functionality change.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
34b98d03bd cfq-iosched: Rename "service_tree" to "st" at some places
At quite a few places we use the keyword "service_tree". At some places,
especially local variables, I have abbreviated it to "st".

Also at couple of places moved binary operator "+" from beginning of line
to end of previous line, as per Tejun's feedback.

v2:
 Reverted most of the service tree name change based on Jeff Moyer's feedback.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
4d2ceea4cb cfq-iosched: More renaming to better represent wl_class and wl_type
Some more renaming. Again making the code uniform w.r.t use of
wl_class/class to represent IO class (RT, BE, IDLE) and using
wl_type/type to represent subclass (SYNC, SYNC-IDLE, ASYNC).

At places this patch shortens the string "workload" to "wl".
Renamed "saved_workload" to "saved_wl_type". Renamed
"saved_serving_class" to "saved_wl_class".

For uniformity with "saved_wl_*" variables, renamed "serving_class"
to "serving_wl_class" and renamed "serving_type" to "serving_wl_type".

Again, just trying to improve upon code uniformity and improve
readability. No functional change.

v2:
- Restored the usage of keyword "service" based on Jeff Moyer's feedback.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
3bf10fea3b cfq-iosched: Properly name all references to IO class
Currently CFQ has three IO classes, RT, BE and IDLE. At many a places we
are calling workloads belonging to these classes as "prio". This gets
very confusing as one starts to associate it with ioprio.

So this patch just does bunch of renaming so that reading code becomes
easier. All reference to RT, BE and IDLE workload are done using keyword
"class" and all references to subclass, SYNC, SYNC-IDLE, ASYNC are made
using keyword "type".

This makes me feel much better while I am reading the code. There is no
functionality change due to this patch.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:08 -08:00
Shaohua Li
3d106fba2e block CFQ: avoid moving request to different queue
request is queued in cfqq->fifo list. Looks it's possible we are moving a
request from one cfqq to another in request merge case. In such case, adjusting
the fifo list order doesn't make sense and is impossible if we don't iterate
the whole fifo list.

My test does hit one case the two cfqq are different, but didn't cause kernel
crash, maybe it's because fifo list isn't used frequently. Anyway, from the
code logic, this is buggy.

I thought we can re-enable the recusive merge logic after this is fixed.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-06 12:39:51 +01:00
Tejun Heo
ffea73fc72 block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
cfq may be built w/ or w/o blkcg support depending on
CONFIG_CFQ_CGROUP_IOSCHED.  If blkcg support is disabled, most of
related code is ifdef'd out but some part is left dangling -
blkcg_policy_cfq is left zero-filled and blkcg_policy_[un]register()
calls are made on it.

Feeding zero filled policy to blkcg_policy_register() is incorrect and
triggers the following WARN_ON() if CONFIG_BLK_CGROUP &&
!CONFIG_CFQ_GROUP_IOSCHED.

 ------------[ cut here ]------------
 WARNING: at block/blk-cgroup.c:867
 Modules linked in:
 Modules linked in:
 CPU: 3 Not tainted 3.4.0-09547-gfb21aff #1
 Process swapper/0 (pid: 1, task: 000000003ff80000, ksp: 000000003ff7f8b8)
 Krnl PSW : 0704100180000000 00000000003d76ca (blkcg_policy_register+0xca/0xe0)
	    R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
 Krnl GPRS: 0000000000000000 00000000014b85ec 00000000014b85b0 0000000000000000
	    000000000096fb60 0000000000000000 00000000009a8e78 0000000000000048
	    000000000099c070 0000000000b6f000 0000000000000000 000000000099c0b8
	    00000000014b85b0 0000000000667580 000000003ff7fd98 000000003ff7fd70
 Krnl Code: 00000000003d76be: a7280001           lhi     %r2,1
	    00000000003d76c2: a7f4ffdf           brc     15,3d7680
	   #00000000003d76c6: a7f40001           brc     15,3d76c8
	   >00000000003d76ca: a7c8ffea           lhi     %r12,-22
	    00000000003d76ce: a7f4ffce           brc     15,3d766a
	    00000000003d76d2: a7f40001           brc     15,3d76d4
	    00000000003d76d6: a7c80000           lhi     %r12,0
	    00000000003d76da: a7f4ffc2           brc     15,3d765e
 Call Trace:
 ([<0000000000b6f000>] initcall_debug+0x0/0x4)
  [<0000000000989e8a>] cfq_init+0x62/0xd4
  [<00000000001000ba>] do_one_initcall+0x3a/0x170
  [<000000000096fb60>] kernel_init+0x214/0x2bc
  [<0000000000623202>] kernel_thread_starter+0x6/0xc
  [<00000000006231fc>] kernel_thread_starter+0x0/0xc
 no locks held by swapper/0/1.
 Last Breaking-Event-Address:
  [<00000000003d76c6>] blkcg_policy_register+0xc6/0xe0
 ---[ end trace b8ef4903fcbf9dd3 ]---

This patch fixes the problem by ensuring all blkcg support code is
inside CONFIG_CFQ_GROUP_IOSCHED.

* blkcg_policy_cfq declaration and blkg_to_cfqg() definition are moved
  inside the first CONFIG_CFQ_GROUP_IOSCHED block.  __maybe_unused is
  dropped from blkcg_policy_cfq decl.

* blkcg_deactivate_poilcy() invocation is moved inside ifdef.  This
  also makes the activation logic match cfq_init_queue().

* All blkcg_policy_[un]register() invocations are moved inside ifdef.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <20120601112954.GC3535@osiris.boeblingen.de.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-04 10:02:29 +02:00