Previously we were using the ratio of the number of lru pages scanned to
the number of eligible lru pages to determine the number of slab objects
to scan. The problem with this is that these two things have nothing to
do with each other, so in slab heavy work loads where there is little to
no page cache we can end up with the pages scanned being a very low
number. This means that we reclaim next to no slab pages and waste a
lot of time reclaiming small amounts of space.
Consider the following scenario, where we have the following values and
the rest of the memory usage is in slab
Active: 58840 kB
Inactive: 46860 kB
Every time we do a get_scan_count() we do this
scan = size >> sc->priority
where sc->priority starts at DEF_PRIORITY, which is 12. The first loop
through reclaim would result in a scan target of 2 pages to 11715 total
inactive pages, and 3 pages to 14710 total active pages. This is a
really really small target for a system that is entirely slab pages.
And this is super optimistic, this assumes we even get to scan these
pages. We don't increment sc->nr_scanned unless we 1) isolate the page,
which assumes it's not in use, and 2) can lock the page. Under pressure
these numbers could probably go down, I'm sure there's some random pages
from daemons that aren't actually in use, so the targets get even
smaller.
Instead use sc->priority in the same way we use it to determine scan
amounts for the lru's. This generally equates to pages. Consider the
following
slab_pages = (nr_objects * object_size) / PAGE_SIZE
What we would like to do is
scan = slab_pages >> sc->priority
but we don't know the number of slab pages each shrinker controls, only
the objects. However say that theoretically we knew how many pages a
shrinker controlled, we'd still have to convert this to objects, which
would look like the following
scan = shrinker_pages >> sc->priority
scan_objects = (PAGE_SIZE / object_size) * scan
or written another way
scan_objects = (shrinker_pages >> sc->priority) *
(PAGE_SIZE / object_size)
which can thus be written
scan_objects = ((shrinker_pages * PAGE_SIZE) / object_size) >>
sc->priority
which is just
scan_objects = nr_objects >> sc->priority
We don't need to know exactly how many pages each shrinker represents,
it's objects are all the information we need. Making this change allows
us to place an appropriate amount of pressure on the shrinker pools for
their relative size.
Link: http://lkml.kernel.org/r/1510780549-6812-1-git-send-email-josef@toxicpanda.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Dave Chinner <david@fromorbit.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In this round, we've followed up to support some generic features such as
cgroup, block reservation, linking fscrypt_ops, delivering write_hints,
and some ioctls. And, we could fix some corner cases in terms of power-cut
recovery and subtle deadlocks.
Enhancement:
- bitmap operations to handle NAT blocks
- readahead to improve readdir speed
- switch to use fscrypt_*
- apply write hints for direct IO
- add reserve_root=%u,resuid=%u,resgid=%u to reserve blocks for root/uid/gid
- modify b_avail and b_free to consider root reserved blocks
- support cgroup writeback
- support FIEMAP_FLAG_XATTR for fibmap
- add F2FS_IOC_PRECACHE_EXTENTS to pre-cache extents
- add F2FS_IOC_{GET/SET}_PIN_FILE to pin LBAs for data blocks
- support inode creation time
Bug fix:
- sysfile-based quota operations
- memory footprint accounting
- allow to write data on partial preallocation case
- fix deadlock case on fallocate
- fix to handle fill_super errors
- fix missing inode updates of fsync'ed file
- recover renamed file which was fsycn'ed before
- drop inmemory pages in corner error case
- keep last_disk_size correctly
- recover missing i_inline flags during roll-forward
Various clean-up patches were added as well.
-----BEGIN PGP SIGNATURE-----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=jZqE
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've followed up to support some generic features such
as cgroup, block reservation, linking fscrypt_ops, delivering
write_hints, and some ioctls. And, we could fix some corner cases in
terms of power-cut recovery and subtle deadlocks.
Enhancements:
- bitmap operations to handle NAT blocks
- readahead to improve readdir speed
- switch to use fscrypt_*
- apply write hints for direct IO
- add reserve_root=%u,resuid=%u,resgid=%u to reserve blocks for root/uid/gid
- modify b_avail and b_free to consider root reserved blocks
- support cgroup writeback
- support FIEMAP_FLAG_XATTR for fibmap
- add F2FS_IOC_PRECACHE_EXTENTS to pre-cache extents
- add F2FS_IOC_{GET/SET}_PIN_FILE to pin LBAs for data blocks
- support inode creation time
Bug fixs:
- sysfile-based quota operations
- memory footprint accounting
- allow to write data on partial preallocation case
- fix deadlock case on fallocate
- fix to handle fill_super errors
- fix missing inode updates of fsync'ed file
- recover renamed file which was fsycn'ed before
- drop inmemory pages in corner error case
- keep last_disk_size correctly
- recover missing i_inline flags during roll-forward
Various clean-up patches were added as well"
* tag 'f2fs-for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (72 commits)
f2fs: support inode creation time
f2fs: rebuild sit page from sit info in mem
f2fs: stop issuing discard if fs is readonly
f2fs: clean up duplicated assignment in init_discard_policy
f2fs: use GFP_F2FS_ZERO for cleanup
f2fs: allow to recover node blocks given updated checkpoint
f2fs: recover some i_inline flags
f2fs: correct removexattr behavior for null valued extended attribute
f2fs: drop page cache after fs shutdown
f2fs: stop gc/discard thread after fs shutdown
f2fs: hanlde error case in f2fs_ioc_shutdown
f2fs: split need_inplace_update
f2fs: fix to update last_disk_size correctly
f2fs: kill F2FS_INLINE_XATTR_ADDRS for cleanup
f2fs: clean up error path of fill_super
f2fs: avoid hungtask when GC encrypted block if io_bits is set
f2fs: allow quota to use reserved blocks
f2fs: fix to drop all inmem pages correctly
f2fs: speed up defragment on sparse file
f2fs: support F2FS_IOC_PRECACHE_EXTENTS
...
Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the NFSv4
LOOKUPP operation.
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall() due to
nfs_idmap_legacy_upcall() being called without an 'aux' parameter.
- Fix a refcount leak in the standard O_DIRECT error path.
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path.
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type.
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations when
the user is requesting only attributes that are already up to date in
the inode cache, or is specifying the AT_STATX_DONT_SYNC flag.
- Add a module alias for the SCSI pNFS layout type.
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the RDMA
transport protocol settings.
- Various other RDMA bugfixes from Chuck.
- pNFS block layout fixes.
- Always set NFS_LOCK_LOST when a lock is lost.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJacHcyAAoJEGcL54qWCgDy5WcP/Aw7GIAVZ+n5B+EIFVvEaWlC
C++eA8vej433ezKRj8IExeCX1C8OKrQZ4iQ3nqIg0mVVQS/Qk+469OhYP9jDagA+
tDZeOs3lbl1EUhUWT+GNxw8bZqKGn9fYzcWFjiYeFTjrcfLYfZTW50V0tofjgmlR
3nQmpPx/56rXE9ZO/EW66HRZWauw7a0hg3/5Ft+F5csqIb3yQOlW8Osp3WClzGBF
to4lS8/IwHvCn3qWAMuivRaMJDxeKrmoJNQh9Kw1Mw3+vurGAjmKo1a153qKPz4N
7wjeP+o3ujc/P7WsJLCIgQRimzSm9FZXMqEVmz07+cIhGbERt2yy0RbHev8bpa+U
3IMj70K9ciPuMZwrAtRAeZL+o9gxlUGUXvTaDUgo4DFgBw9Q5CnMnFn6a725l4h0
nSZsE+bR8d4l/yEjf77SbTrk7atMLfUG1XnKH20i1CUjtd4CaLLzjn81TlbQrfuI
XaFdJUUt63dPTIbhPEk7wHFcITkGZiyXhcepgbaXLiDH/3gyZmqTYzJ2EH14sOC5
NaTueE3ASTiFChvG7jvc89HJN5SN5W11PyzI+GHezx9VkFnPZM3/q2V7oEX2aSld
tkRlDMO4dVmpAA4LVAAarDr0a8ZsJQOdb+yLn21pbmKNAs1vol7tMfJe57ykEV6v
WNAgtKJLtZE0Lh1UyEq0
=5Vv2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the
NFSv4 LOOKUPP operation
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall()
due to nfs_idmap_legacy_upcall() being called without an 'aux'
parameter
- Fix a refcount leak in the standard O_DIRECT error path
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations
when the user is requesting only attributes that are already up to
date in the inode cache, or is specifying the AT_STATX_DONT_SYNC
flag
- Add a module alias for the SCSI pNFS layout type
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the
RDMA transport protocol settings
- Various other RDMA bugfixes from Chuck
- pNFS block layout fixes
- Always set NFS_LOCK_LOST when a lock is lost"
* tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Fix a race between mmap() and O_DIRECT
NFS: Remove a redundant call to unmap_mapping_range()
pnfs/blocklayout: Ensure disk address in block device map
pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors
lockd: Fix server refcounting
SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint
SUNRPC: Micro-optimize __rpc_execute
SUNRPC: task_run_action should display tk_callback
sunrpc: Format RPC events consistently for display
SUNRPC: Trace xprt_timer events
xprtrdma: Correct some documenting comments
xprtrdma: Fix "bytes registered" accounting
xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects
xprtrdma: Add trace points to instrument QP and CQ access upcalls
xprtrdma: Add trace points in the client-side backchannel code paths
xprtrdma: Add trace points for connect events
xprtrdma: Add trace points to instrument MR allocation and recovery
xprtrdma: Add trace points to instrument memory invalidation
xprtrdma: Add trace points in reply decoder path
xprtrdma: Add trace points to instrument memory registration
..
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
Pull timer updates from Thomas Gleixner:
"The timer departement presents:
- A rather large rework of the hrtimer infrastructure which
introduces softirq based hrtimers to replace the spread of
hrtimer/tasklet combos which force the actual callback execution
into softirq context. The approach is completely different from the
initial implementation which you cursed at 10 years ago rightfully.
The softirq based timers have their own queues and there is no
nasty indirection and list reshuffling in the hard interrupt
anymore. This comes with conversion of some of the hrtimer/tasklet
users, the rest and the final removal of that horrible interface
will come towards the end of the merge window or go through the
relevant maintainer trees.
Note: The top commit merged the last minute bugfix for the 10 years
old CPU hotplug bug as I wanted to make sure that I fatfinger the
merge conflict resolution myself.
- The overhaul of the STM32 clocksource/clockevents driver
- A new driver for the Spreadtrum SC9860 timer
- A new driver dor the Actions Semi S700 timer
- The usual set of fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
usb/gadget/NCM: Replace tasklet with softirq hrtimer
ALSA/dummy: Replace tasklet with softirq hrtimer
hrtimer: Implement SOFT/HARD clock base selection
hrtimer: Implement support for softirq based hrtimers
hrtimer: Prepare handling of hard and softirq based hrtimers
hrtimer: Add clock bases and hrtimer mode for softirq context
hrtimer: Use irqsave/irqrestore around __run_hrtimer()
hrtimer: Factor out __hrtimer_next_event_base()
hrtimer: Factor out __hrtimer_start_range_ns()
hrtimer: Remove the 'base' parameter from hrtimer_reprogram()
hrtimer: Make remote enqueue decision less restrictive
hrtimer: Unify remote enqueue handling
hrtimer: Unify hrtimer removal handling
hrtimer: Make hrtimer_force_reprogramm() unconditionally available
hrtimer: Make hrtimer_reprogramm() unconditional
hrtimer: Make hrtimer_cpu_base.next_timer handling unconditional
hrtimer: Make the remote enqueue check unconditional
hrtimer: Use accesor functions instead of direct access
hrtimer: Make the hrtimer_cpu_base::hres_active field unconditional, to simplify the code
hrtimer: Make room in 'struct hrtimer_cpu_base'
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlpvikQACgkQxWXV+ddt
WDs6qA//ZE7eEH0sKpD4Z+3gUevk/MMXwE9prRijEdjXz/K/UXtvpq0sI7HMQskZ
Ls9Wmzof+3WEQoa08RQZFzwuclW1Udm09SqE2oHP2gXQB5rC0BtWdrlMaKUJy03y
NUwxHetbE6TsFLU5HIVmi05NexNx9SVV6oJTWt00RlXTePw9Aoc88ikoXXUE2vqH
wbH9/ccmM9EkDFxdG+YG5QX054kQV8/5RXdqBJnIiGVRX5ZsAY84AN9x9YoRCVUw
wq9TfPu6XmeA6Uq6knpeLlXDms5w+FE3n5CduROk7Q7YNgpoZekF20c8uK8HzT4T
KF8hc0QpQgRCVBJ8I4MbPSMRIDf3IWfZmWSDEDda/6/ep6Bl99b8PFvdDKDBMUct
8wsgGrwGbHuz2l2QUIXjpBL9Cv9Tbu8vjmg0h2hFrpiH1c8JaXjKtJXAMtigWsZ1
DdX+5Y0zqvV/YLpzKF4aMDWXIteN4qaznvjdmj3B7BxgcnITOV/cmPCyMplNrtUa
Cs2fzGV5tpxhBzxE490v+frMULmLq2W1e6WPfFCqPKBCqulcR75TozDQS9M2/h4k
uAZzVKoguHrUPP1ONVas9aVC05K473nbYPd28eecYwkZ4z32hK4SAdnQY1aPreTe
axoV7p7a+i1bkzT5LK6gIfpddVWth8w45nz4P0lwxp0Z6XlkbJE=
=Irul
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features or user visible changes:
- fallocate: implement zero range mode
- avoid losing data raid profile when deleting a device
- tree item checker: more checks for directory items and xattrs
Notable fixes:
- raid56 recovery: don't use cached stripes, that could be
potentially changed and a later RMW or recovery would lead to
corruptions or failures
- let raid56 try harder to rebuild damaged data, reading from all
stripes if necessary
- fix scrub to repair raid56 in a similar way as in the case above
Other:
- cleanups: device freeing, removed some call indirections, redundant
bio_put/_get, unused parameters, refactorings and renames
- RCU list traversal fixups
- simplify mount callchain, remove recursing back when mounting a
subvolume
- plug for fsync, may improve bio merging on multiple devices
- compression heurisic: replace heap sort with radix sort, gains some
performance
- add extent map selftests, buffered write vs dio"
* tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (155 commits)
btrfs: drop devid as device_list_add() arg
btrfs: get device pointer from device_list_add()
btrfs: set the total_devices in device_list_add()
btrfs: move pr_info into device_list_add
btrfs: make btrfs_free_stale_devices() to match the path
btrfs: rename btrfs_free_stale_devices() arg to skip_dev
btrfs: make btrfs_free_stale_devices() argument optional
btrfs: make btrfs_free_stale_device() to iterate all stales
btrfs: no need to check for btrfs_fs_devices::seeding
btrfs: Use IS_ALIGNED in btrfs_truncate_block instead of opencoding it
Btrfs: noinline merge_extent_mapping
Btrfs: add WARN_ONCE to detect unexpected error from merge_extent_mapping
Btrfs: extent map selftest: dio write vs dio read
Btrfs: extent map selftest: buffered write vs dio read
Btrfs: add extent map selftests
Btrfs: move extent map specific code to extent_map.c
Btrfs: add helper for em merge logic
Btrfs: fix unexpected EEXIST from btrfs_get_extent
Btrfs: fix incorrect block_len in merge_extent_mapping
btrfs: Remove unused readahead spinlock
...
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
-----BEGIN PGP SIGNATURE-----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=67UR
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client updates for Linux 4.16
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
Backchannel tasks will not have a reference to the rpc_clnt. Return -1 for
cl_clid in that case.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
Clean up: Make it easier to use text search when browsing a trace
report. Other events use "status=%d".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These can be shared with all kernel ULPs, and more can easily be
added as needed.
Note: checkpatch.pl has some heartburn with the TRACE_DEFINE_ENUM
macros and the LIST macros. These follow the same style as other
header files under include/tracing/events , thus should be
considered acceptable exceptions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 9036c10208 ("Btrfs: update hole handling v2") added the
FLAG_VACANCY to denote holes, however there was already a consistent way
of flagging extents which represent hole - ->block_start =
EXTENT_MAP_HOLE. And also the only place where this flag is checked is
in the fiemap code, but the block_start value is also checked and every
other place in the filesystem detects holes by using block_start
value's. So remove the extra flag. This survived a full xfstest run.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* pm-cpufreq: (36 commits)
cpufreq: scpi: remove arm_big_little dependency
drivers: psci: remove cluster terminology and dependency on physical_package_id
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
cpufreq: intel_pstate: Add Skylake servers support
cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
cpufreq: imx6q: add 696MHz operating point for i.mx6ul
ARM: dts: imx6ul: add 696MHz operating point
cpufreq: stats: Change return type of cpufreq_stats_update() as void
powernv-cpufreq: Treat pstates as opaque 8-bit values
powernv-cpufreq: Fix pstate_to_idx() to handle non-continguous pstates
powernv-cpufreq: Add helper to extract pstate from PMSR
cpu_cooling: Remove static-power related documentation
cpufreq: imx6q: switch to Use clk_bulk_get() to refine clk operations
PM / OPP: Make local function ti_opp_supply_set_opp() static
PM / OPP: Add ti-opp-supply driver
dt-bindings: opp: Introduce ti-opp-supply bindings
cpufreq: ti-cpufreq: Add support for multiple regulators
cpufreq: ti-cpufreq: Convert to module_platform_driver
cpufreq: Add DVFS support for Armada 37xx
MAINTAINERS: add new entries for Armada 37xx cpufreq driver
...
* pm-cpufreq-thermal:
cpu_cooling: Remove static-power related documentation
cpu_cooling: Drop static-power related stuff
cpu_cooling: Keep only one of_cpufreq*cooling_register() helper
cpu_cooling: Remove unused cpufreq_power_cooling_register()
cpu_cooling: Make of_cpufreq_power_cooling_register() parse DT
Currently hrtimer callback functions are always executed in hard interrupt
context. Users of hrtimers, which need their timer function to be executed
in soft interrupt context, make use of tasklets to get the proper context.
Add additional hrtimer clock bases for timers which must expire in softirq
context, so the detour via the tasklet can be avoided. This is also
required for RT, where the majority of hrtimer is moved into softirq
hrtimer context.
The selection of the expiry mode happens via a mode bit. Introduce
HRTIMER_MODE_SOFT and the matching combinations with the ABS/REL/PINNED
bits and update the decoding of hrtimer_mode in tracepoints.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-27-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'hrtimer_start' tracepoint lacks the mode information. The mode is
important because consecutive starts can switch from ABS to REL or from
PINNED to non PINNED.
Append the mode field.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-10-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as
well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for
detecting the ABS or REL timer modes is not valid anymore, it got broken
by the introduction of HRTIMER_MODE_PINNED.
HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the
sake of completeness print all given modes.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and
in kernel/torture.c). Also a couple of fixes to avoid sending
IPIs to offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends()
and read_barrier_depends().
- Miscellaneous fixes.
- Torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes generic/342 which doesn't recover renamed file which was fsynced
before. It will be done via another fsync on newly created file.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull networking fixes from David Miller:
1) IPv6 gre tunnels end up with different default features enabled
depending upon whether netlink or ioctls are used to bring them up.
Fix from Alexey Kodanev.
2) Fix read past end of user control message in RDS< from Avinash
Repaka.
3) Missing RCU barrier in mini qdisc code, from Cong Wang.
4) Missing policy put when reusing per-cpu route entries, from Florian
Westphal.
5) Handle nested PCI errors properly in bnx2x driver, from Guilherme G.
Piccoli.
6) Run nested transport mode IPSEC packets via tasklet, from Herbert
Xu.
7) Fix handling poll() for stream sockets in tipc, from Parthasarathy
Bhuvaragan.
8) Fix two stack-out-of-bounds issues in IPSEC, from Steffen Klassert.
9) Another zerocopy ubuf handling fix, from Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
strparser: Call sock_owned_by_user_nocheck
sock: Add sock_owned_by_user_nocheck
skbuff: in skb_copy_ubufs unclone before releasing zerocopy
tipc: fix hanging poll() for stream sockets
sctp: Replace use of sockets_allocated with specified macro.
bnx2x: Improve reliability in case of nested PCI errors
tg3: Enable PHY reset in MTU change path for 5720
tg3: Add workaround to restrict 5762 MRRS to 2048
tg3: Update copyright
net: fec: unmap the xmit buffer that are not transferred by DMA
tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path
tipc: error path leak fixes in tipc_enable_bearer()
RDS: Check cmsg_len before dereferencing CMSG_DATA
tcp: Avoid preprocessor directives in tracepoint macro args
tipc: fix memory leak of group member when peer node is lost
net: sched: fix possible null pointer deref in tcf_block_put
tipc: base group replicast ack counter on number of actual receivers
net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap()
net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround
ip6_gre: fix device features for ioctl setup
...
Using a preprocessor directive to check for CONFIG_IPV6 in the middle of
a DECLARE_EVENT_CLASS macro's arg list causes sparse to report a series
of errors:
./include/trace/events/tcp.h:68:1: error: directive in argument list
./include/trace/events/tcp.h:75:1: error: directive in argument list
./include/trace/events/tcp.h:144:1: error: directive in argument list
./include/trace/events/tcp.h:151:1: error: directive in argument list
./include/trace/events/tcp.h:216:1: error: directive in argument list
./include/trace/events/tcp.h:223:1: error: directive in argument list
./include/trace/events/tcp.h:274:1: error: directive in argument list
./include/trace/events/tcp.h:281:1: error: directive in argument list
Once sparse finds an error, it stops printing warnings for the file it
is checking. This masks any sparse warnings that would normally be
reported for the core TCP code.
Instead, handle the preprocessor conditionals in a couple of auxiliary
macros. This also has the benefit of reducing duplicate code.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- The runtime PM clk patches that landed this merge window forgot to
runtime resume devices that may be off while recalculating and setting
rates of child clks of whatever clk is changing rates.
- We had a NULL pointer deref in an old clk tracepoint when clk_set_parent()
is called with a NULL parent pointer. This shouldn't really happen, but
it's best to avoid this regardless.
- The sun9i-mmc clk driver didn't provide 'reset' support, just 'assert'
and 'deassert' so the MMC driver stopped probing when the probe was changed
to do a reset instead of assert/deassert pair. This implements the reset so
things work again.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kvSh
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's a trio of fixes:
- The runtime PM clk patches that landed this merge window forgot to
runtime resume devices that may be off while recalculating and
setting rates of child clks of whatever clk is changing rates.
- We had a NULL pointer deref in an old clk tracepoint when
clk_set_parent() is called with a NULL parent pointer. This
shouldn't really happen, but it's best to avoid this regardless.
- The sun9i-mmc clk driver didn't provide 'reset' support, just
'assert' and 'deassert' so the MMC driver stopped probing when the
probe was changed to do a reset instead of assert/deassert pair.
This implements the reset so things work again"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi: sun9i-mmc: Implement reset callback for reset controls
clk: fix a panic error caused by accessing NULL pointer
clk: Manage proper runtime PM state in clk_change_rate()
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJaO6N9AAoJEL/70l94x66DC1wH/Rf+u0Cj6ZQil6LK6Nf8bfPd
3TqrwrxUDeXwi8GzsvK14izBr1mDzidSHIO0Q4XINFRSRdaf43h3R2im/SJqvNhP
xktCmJI2CxN96oaC7kIExgwf3YKhFdLIADfbT8oR9p3xZG/+c97dkr3b4XtmVCDb
ZXdUEOcKnoW4zwpfJN30FLlq4OwYvuYVz02AEfPivZRDfhhus/TYSnuSdxH8CLNf
75ymuKyXoo/RELbimwbMk8Cm9+ey7PjlUGOgbnbXIFtmgznXhLzAOeES2B+46J5b
sMBPlmiJrn6N//lM18CC5yOBzBLGsYOoXggtw4aU/5nM4GVcFebWedpcoD4D8Jw=
=Bt8w
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
tools/kvm_stat: sort '-f help' output
kvm: x86: fix RSM when PCID is non-zero
KVM: Fix stack-out-of-bounds read in write_mmio
KVM: arm/arm64: Fix timer enable flow
KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state
KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC
KVM: arm/arm64: Fix HYP unmapping going off limits
arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu
KVM/x86: Check input paging mode when cs.l is set
tools/kvm_stat: add line for totals
tools/kvm_stat: stop ignoring unhandled arguments
tools/kvm_stat: suppress usage information on command line errors
tools/kvm_stat: handle invalid regular expressions
tools/kvm_stat: add hint on '-f help' to man page
tools/kvm_stat: fix child trace events accounting
tools/kvm_stat: fix extra handling of 'help' with fields filter
tools/kvm_stat: fix missing field update after filter change
tools/kvm_stat: fix drilldown in events-by-guests mode
tools/kvm_stat: fix command line option '-g'
kvm: x86: fix WARN due to uninitialized guest FPU state
...
Reported by syzkaller:
BUG: KASAN: stack-out-of-bounds in write_mmio+0x11e/0x270 [kvm]
Read of size 8 at addr ffff8803259df7f8 by task syz-executor/32298
CPU: 6 PID: 32298 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #18
Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
Call Trace:
dump_stack+0xab/0xe1
print_address_description+0x6b/0x290
kasan_report+0x28a/0x370
write_mmio+0x11e/0x270 [kvm]
emulator_read_write_onepage+0x311/0x600 [kvm]
emulator_read_write+0xef/0x240 [kvm]
emulator_fix_hypercall+0x105/0x150 [kvm]
em_hypercall+0x2b/0x80 [kvm]
x86_emulate_insn+0x2b1/0x1640 [kvm]
x86_emulate_instruction+0x39a/0xb90 [kvm]
handle_exception+0x1b4/0x4d0 [kvm_intel]
vcpu_enter_guest+0x15a0/0x2640 [kvm]
kvm_arch_vcpu_ioctl_run+0x549/0x7d0 [kvm]
kvm_vcpu_ioctl+0x479/0x880 [kvm]
do_vfs_ioctl+0x142/0x9a0
SyS_ioctl+0x74/0x80
entry_SYSCALL_64_fastpath+0x23/0x9a
The path of patched vmmcall will patch 3 bytes opcode 0F 01 C1(vmcall)
to the guest memory, however, write_mmio tracepoint always prints 8 bytes
through *(u64 *)val since kvm splits the mmio access into 8 bytes. This
leaks 5 bytes from the kernel stack (CVE-2017-17741). This patch fixes
it by just accessing the bytes which we operate on.
Before patch:
syz-executor-5567 [007] .... 51370.561696: kvm_mmio: mmio write len 3 gpa 0x10 val 0x1ffff10077c1010f
After patch:
syz-executor-13416 [002] .... 51302.299573: kvm_mmio: mmio write len 3 gpa 0x10 val 0xc1010f
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Comment fixes
- Build fix
- Better memory alloction (don't use NR_CPUS)
- Configuration fix
- Build warning fix
- Enhanced callback parameter (to simplify users of trace hooks)
- Give up on stack tracing when RCU isn't watching (it's a lost cause)
-----BEGIN PGP SIGNATURE-----
iQHIBAABCgAyFiEEPm6V/WuN2kyArTUe1a05Y9njSUkFAlozKm0UHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQ1a05Y9njSUmhXwv7BEY923K3Nl3qC6LeYmNyrZ4g1PsD
nbZ+ZjU3KlMPugGbnJCJbfsS0utUp2Wd9gHT32O4BUf0/Pxjo3utXvkzRQJ3SwHT
X7QhXROkicAKRFrPxj0BaiLexC+yJR23wGp2YUVHLO4Aa/ptN8BJvH22+eDpsCLc
f1DWJdvdbyPBUeoHNKevjvccsUYMlnBfe1jhJ9nRWHnq1axGV3bllcd6v4T07LgK
LO28Krp4/V3tVN9Sq6jBoGTrULf5O1xtuBDVtANeXdha1oMUTYr4TUzTuOQxFgNu
sCIpUWTKu+PNGmU5bhlryb20C2+PveE4EMK0InVVlqrhYJ/XjXFyRaZYYkM2NAKq
XmeHVjMfc6Wmrd/nepuaTZvGGrK2kK/pCX/XuQthKKjAU6rO5X+FfGiSGodLPIYB
1m+QvfX8Re2IJkswm3lS68LKtG7SnjcSB9sY6PhVe6C6oP2ya2O1hthJ+TkrfNbc
lhE5HzfCJZ9ujSjcQoUGwjrhnIezQX4KnfJZ
=WdMQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fix-ups:
- comment fixes
- build fix
- better memory alloction (don't use NR_CPUS)
- configuration fix
- build warning fix
- enhanced callback parameter (to simplify users of trace hooks)
- give up on stack tracing when RCU isn't watching (it's a lost
cause)"
* tag 'trace-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have stack trace not record if RCU is not watching
tracing: Pass export pointer as argument to ->write()
ring-buffer: Remove unused function __rb_data_page_index()
tracing: make PREEMPTIRQ_EVENTS depend on TRACING
tracing: Allocate mask_str buffer dynamically
tracing: always define trace_{irq,preempt}_{enable_disable}
tracing: Fix code comments in trace.c
The trace event rcu_nocb_wake is only used when CONFIG_RCU_NOCB_CPU is
defined. But the trace event is defined regardless. As defined trace
events take up memory, it is a waste to have it defined when not used.
Surround the trace event with an #ifdef to have it only defined when it
is used.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
No one has used it for the last two and half years (since it was
introduced by commit c36cf07176 (thermal: cpu_cooling: implement the
power cooling device API), get rid of it.
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases the clock parent would be set NULL when doing re-parent,
it will cause a NULL pointer accessing if clk_set trace event is
enabled.
This patch sets the parent as "none" if the input parameter is NULL.
Fixes: dfc202ead3 (clk: Add tracepoints for hardware operations)
Signed-off-by: Cai Li <cai.li@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We get a build error in the irqsoff tracer in some configurations:
kernel/trace/trace_irqsoff.c: In function 'trace_preempt_on':
kernel/trace/trace_irqsoff.c:855:2: error: implicit declaration of function 'trace_preempt_enable_rcuidle'; did you mean 'trace_irq_enable_rcuidle'? [-Werror=implicit-function-declaration]
trace_preempt_enable_rcuidle(a0, a1);
The problem is that trace_preempt_enable_rcuidle() has different
definition based on multiple Kconfig symbols, but not all combinations
have a valid definition.
This changes the conditions so that we always get exactly one
definition of each of the four tracing macros. I have not tried
to verify that these definitions are sensible, but now we
can build all randconfig combinations again.
Link: http://lkml.kernel.org/r/20171019083230.2450779-1-arnd@arndb.de
Fixes: d59158162e ("tracing: Add support for preempt and irq enable/disable events")
Acked-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a compilation warning in xdp redirect tracepoint due to
missing bpf.h include that pulls in struct bpf_map, from Xie.
2) Limit the maximum number of attachable BPF progs for a given
perf event as long as uabi is not frozen yet. The hard upper
limit is now 64 and therefore the same as with BPF multi-prog
for cgroups. Also add related error checking for the sample
BPF loader when enabling and attaching to the perf event, from
Yonghong.
3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log
case, so that the test case can always pass and not fail in
some environments due to too low default limit, also from
Yonghong.
4) Fix up a missing license header comment for kernel/bpf/offload.c,
from Jakub.
5) Several fixes for bpftool, among others a crash on incorrect
arguments when json output is used, error message handling
fixes on unknown options and proper destruction of json writer
for some exit cases, all from Quentin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We meet this compile warning, which caused by missing bpf.h in xdp.h.
In file included from ./include/trace/events/xdp.h:10:0,
from ./include/linux/bpf_trace.h:6,
from drivers/net/ethernet/intel/i40e/i40e_txrx.c:29:
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
const struct bpf_map *map, u32 map_index),
^
./include/linux/tracepoint.h:187:34: note: in definition of macro ‘__DECLARE_TRACE’
static inline void trace_##name(proto) \
^~~~~
./include/linux/tracepoint.h:352:24: note: in expansion of macro ‘PARAMS’
__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), \
^~~~~~
./include/linux/tracepoint.h:477:2: note: in expansion of macro ‘DECLARE_TRACE’
DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
^~~~~~~~~~~~~
./include/linux/tracepoint.h:477:22: note: in expansion of macro ‘PARAMS’
DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
^~~~~~
./include/trace/events/xdp.h:89:1: note: in expansion of macro ‘DEFINE_EVENT’
DEFINE_EVENT(xdp_redirect_template, xdp_redirect,
^~~~~~~~~~~~
./include/trace/events/xdp.h:90:2: note: in expansion of macro ‘TP_PROTO’
TP_PROTO(const struct net_device *dev,
^~~~~~~~
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
const struct bpf_map *map, u32 map_index),
^
./include/linux/tracepoint.h:203:38: note: in definition of macro ‘__DECLARE_TRACE’
register_trace_##name(void (*probe)(data_proto), void *data) \
^~~~~~~~~~
./include/linux/tracepoint.h:354:4: note: in expansion of macro ‘PARAMS’
PARAMS(void *__data, proto), \
^~~~~~
Reported-by: Huang Daode <huangdaode@hisilicon.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Fixes: 8d3b778ff5 ("xdp: tracepoint xdp_redirect also need a map argument")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones
missed one spot. From Zhu Yanjun.
2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg.
3) Fix checksum offloading in thunderx driver, from Sunil Goutham.
4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger.
5) Fix use after free of packet headers in TIPC, from Jon Maloy.
6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva.
7) Tunneling fixes in mlxsw driver, from Petr Machata.
8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike
Maloney.
9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric
Dumazet.
10) Fix regression in sch_sfq.c due to one of the timer_setup()
conversions. From Paolo Abeni.
11) SCTP does list_for_each_entry() using wrong struct member, fix from
Xin Long.
12) Don't use big endian netlink attribute read for
IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin
Long.
13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing
adding filters there. From Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
ethernet: dwmac-stm32: Fix copyright
net: via: via-rhine: use %p to format void * address instead of %x
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
myri10ge: Update MAINTAINERS
net: sched: cbq: create block for q->link.block
atm: suni: remove extraneous space to fix indentation
atm: lanai: use %p to format kernel addresses instead of %x
VSOCK: Don't set sk_state to TCP_CLOSE before testing it
atm: fore200e: use %pK to format kernel addresses instead of %x
ambassador: fix incorrect indentation of assignment statement
vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
sctp: use right member as the param of list_for_each_entry
sch_sfq: fix null pointer dereference at timer expiration
cls_bpf: don't decrement net's refcount when offload fails
net/packet: fix a race in packet_bind() and packet_notifier()
packet: fix crash in fanout_demux_rollover()
sctp: remove extern from stream sched
sctp: force the params with right types for sctp csum apis
sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
...
Commit c0f4dfd4f9 ("rcu: Make RCU_FAST_NO_HZ take advantage of
numbered callbacks") removed the only instances of trace_rcu_prep_idle,
but did not remove the TRACE_EVENT() that creates it. As defined trace
events take up memory within the kernel even when they are not used,
this is a waste of space. Remove the obsolete event.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The code that checks for non-idle non-nohz_idle-usermode tasks invoking
rcu_eqs_enter() and rcu_eqs_exit() prints a considerable quantity of
helpful information. However, these checks fire rarely, so the extra
complexity is no longer worth it. This commit therefore replaces this
debug code with simple WARN_ON_ONCE() statements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because the ->dynticks_nesting field now only contains the process-based
nesting level instead of a value encoding both the process nesting level
and the irq "nesting" level, we no longer need a long long, even on
32-bit systems. This commit therefore changes both the ->dynticks_nesting
and ->dynticks_nmi_nesting fields to long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a documentation fix, a Sparse warning fix and a debugging
fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix task state recording/printout
sched/deadline: Don't use dubious signed bitfields
sched/deadline: Fix the description of runtime accounting in the documentation
