Only accessed from the local file.
Warning:
drivers/iio/light/cm32181.c:508:1: warning: symbol 'cm32181_pm_ops' was not declared. Should it be static?
Fixes: 68c1b3dd5c ("iio: light: cm32181: Add PM support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220807145457.646062-3-jic23@kernel.org
Warning cleanup:
drivers/iio/test/iio-test-rescale.c:32:30: warning: symbol 'scale_cases' was not declared. Should it be static?
drivers/iio/test/iio-test-rescale.c:480:30: warning: symbol 'offset_cases' was not declared. Should it be static?
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220807145457.646062-2-jic23@kernel.org
All known major issues with this driver resolved so time to move
it out of staging. This also allows us to remove the now empty
staging/iio/cdc directory and build files.
Note this cleanup work was done using the roadtest framework.
https://lore.kernel.org/all/20220311162445.346685-1-vincent.whitchurch@axis.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Address an ABI gap for device where the offset of both lines in a
differential pair may be controlled so as to allow a wider range of
inputs, but without having any direct effect of the differential
measurement.
_offset cannot be used as to remain in line with existing usage,
userspace would be expected to apply it as (_raw + _offset) * _scale
whereas _zeropoint is not. i.e. If we were computing the differential
in software it would be.
((postive_raw + _zeropoint) - (negative_raw + zeropoint) + _offset) * _scale
= ((postive_raw - negative_raw) + _offset) * _scale
= (differential_raw + _offset) * _scale
Similarly calibbias is expected to tweak the measurement seen, not
the adjust the two lines of the differential pair.
Needed for in_capacitanceX-capacitanceY_zeropoint for the
AD7746 CDC driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220626122938.582107-12-jic23@kernel.org
Just cosmetics. No functional change intended...
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-16-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since all users of the OF dependendent API are now converted to use the
firmware agnostic alternative, we can drop OF dependencies from the IIO
in kernel interface.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-15-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220715122903.332535-14-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-13-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-12-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-11-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220715122903.332535-10-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-9-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move from 'of_xlate()' to 'fwnode_xlate()'. The end goal is to completely
drop OF from the IIO inkernel interface.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-8-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This moves the IIO in kernel interface to use fwnode properties and thus
be firmware agnostic.
Note that the interface is still not firmware agnostic. At this point we
have both OF and fwnode interfaces so that we don't break any user. On
top of this we also want to have a per driver conversion and that is the
main reason we have both of_xlate() and fwnode_xlate() support.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-6-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change splits of_iio_channel_get_by_name() so that it decouples
looking for channels in the current node from looking in it's parents
nodes. This will be helpful when moving to fwnode properties where we
need to release the handles when looking for channels in parent's nodes.
No functional change intended...
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-5-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
APIs like of_iio_channel_get_by_name() and of_iio_channel_get_all() were
returning a mix of NULL and pointers with NULL being the way to
"notify" that we should do a "system" lookup for channels. This make
it very confusing and prone to errors as commit 9f63cc0921ec
("iio: inkern: fix return value in devm_of_iio_channel_get_by_name()")
proves. On top of this, patterns like 'if (channel != NULL) return
channel' were being used where channel could actually be an error code
which makes the code hard to read.
This change also makes some functional changes on how errors were being
handled. In the original behavior, even if we get an error like '-ENOMEM',
we still continue with the search. We should only continue to lookup for
the channel when it makes sense to do so. Hence, the main error handling
in 'of_iio_channel_get_by_name()' is changed to the following logic:
* If a channel 'name' is provided and we do find it via
'io-channel-names', we should be able to get it. If we get any error,
we should not proceed with the lookup. Moreover, we should return an error
so that callers won't proceed with a system lookup.
* If a channel 'name' is provided and we cannot find it ('index < 0'),
'of_parse_phandle_with_args()' is expected to fail with '-EINVAL'. Hence,
we should only continue if we get that error.
* If a channel 'name' is not provided we should only carry on with the
search if 'of_parse_phandle_with_args()' returns '-ENOENT'.
Also note that a system channel lookup is only done if the returned
error code (from 'of_iio_channel_get_by_name()' or
'of_iio_channel_get_all()' is -ENODEV.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
of_iio_channel_get_by_name() can either return NULL or an error pointer
so that only doing IS_ERR() is not enough. Fix it by checking the NULL
pointer case and return -ENODEV in that case. Note this is done like this
so that users of the function (which only check for error pointers) do
not need to be changed. This is not ideal since we are losing error codes
and as such, in a follow up change, things will be unified so that
of_iio_channel_get_by_name() only returns error codes.
Fixes: 6e39b145ce ("iio: provide of_iio_channel_get_by_name() and devm_ version it")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220715122903.332535-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'of_node_put()' can potentially release the memory pointed to by
'iiospec.np' which would leave us with an invalid pointer (and we would
still pass it in 'of_xlate()'). Note that it is not guaranteed for the
of_node lifespan to be attached to the device (to which is attached)
lifespan so that there is (even though very unlikely) the possibility
for the node to be freed while the device is still around. Thus, as there
are indeed some of_xlate users which do access the node, a race is indeed
possible.
As such, we can only release the node after we are done with it.
Fixes: 17d82b47a2 ("iio: Add OF support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220715122903.332535-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add runtime PM support by disabling/enabling ADC's peripheral clock.
On simple conversion the ADC's clock is kept enabled just while the
conversion is in progress. This includes also temperature conversion.
For triggered buffers and touch conversions the ADC clock is kept enabled
while the triggered buffers or touch are enabled. Along with it removed
the __maybe_unused on suspend() and resume() ops as the dev_pm_ops
object members are now filled with SYSTEM_SLEEP_PM_OPS().
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-20-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC on SAMA7G5 has a dedicated channel (channel 31) for measuring
in-SoC temperature. 2 inputs are multiplexed on channel 31, VTEMP and
VBG as follows:
`
| \ +-----+
VBG --->| | ch31 | |
Vtemp --->| |----->| ADC |
| / | |
| / +-----+
.
where:
- VTEMP is proportional to the absolute temperature voltage
- VBG is a quasi-temperature independent voltage
Both VBG and VTEMP are needed to determine the correct in-SoC
temperature. At a moment of time only one of these could be measured, the
selection being done with bit SRCLCH bit of ACR register. The formula to
calculate the temperature is as follows:
P1 + (Vref * (VTEMP - P6 - P4 * VBG)) / (VBG * VTEMP_DT)
where:
- P1, P4, P6 are calibration data retrieved from OTP memory
- Vref is the reference voltage for ADC
- VTEMP_DT is the voltage sensitivity to temperature and is constant
- VTEMP, VBG are the measured values from channel 31
For better resolution before reading the temperature certain settings
for oversampling ratio, sample frequency, EMR.TRACKX, MR.TRACKTIM are
applied. The initial settings are reapplied at the end of temperature
reading.
Current support is not integrated with trigger buffers channel 31 not
being enabled/disabled in functions at91_adc_buffer_prepare(),
at91_adc_buffer_postdisable() thus the conversion for channel 31 is not
done in case trigger buffers are enabled. In case of trigger buffers are
enabled and temperature requests are received in the driver though
at91_adc_read_temp() the at91_adc_read_temp() will return with an error
code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-18-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove iio_device_{claim, release}_direct_mode() and lock/unlock to
&st->lock from at91_adc_read_info_raw(). Instead add a wrapper around
at91_adc_read_info_raw() and do there the lock/unlock. This will allow
using the at91_adc_read_info_raw() in patch that add support for
temperature sensor.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-16-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add startup and tracktim as parameter for at91_adc_setup_samp_freq()
function. In case of temperature sensor being enabled these parameters
will be configured on temperature read request to improve the accuracy
of the read temperature.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-15-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for updating trackx bits of EMR register. Having different
values of EMR.TRACKX when measuring temperature give a better accuracy.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-14-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADC captures data on 12 bits (if oversampling is not enabled). When using
oversampling captured data could go up to 14 bits for SAMA5D2 or up to
16 bits for SAMA7G5 (depending on oversampling settings). All the channels
that are subject of oversampling are registered as 14 or 16 real bits.
Depending on the oversampling settings the ADC converted value need to be
shifted up to 14 or 16 to cope with realbits value registered to IIO
subsystem. Commit adds platform specific information to know if we
run on a system with up to 14 or 16 bits ADC converted data.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-11-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add .read_avail() to chan_info ops which will retrieve the available
oversampling ratio.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-10-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop AT91_OSR_1SAMPLES, AT91_OSR_4SAMPLES, AT91_OSR_16SAMPLES defines
and insted use their values inline.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-9-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Oversampling values are checked anyway in at91_adc_emr_config(). Remove
the checking of these from at91_adc_write_raw() and return -EINVAL
instead in at91_adc_emr_config().
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-8-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SAMA7G5 introduces 64 and 256 oversampling rates. Due to this EMR.OSR is 3
bits long. Change the code to reflect this. Commit prepares the code
for the addition of 64 and 256 oversampling rates.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-7-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When buffers are enabled conversion may start asynchronously thus
allowing changes on actual hardware could lead to bad behavior. Thus
do not allow changing oversampling ratio and sample frequency when
if iio_device_claim_direct_mode() returns with error.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-6-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In case triggered buffers are enabled while system is suspended they will
not work anymore after resume. For this call at91_adc_buffer_postdisable()
on suspend and at91_adc_buffer_prepare() on resume. On tests it has been
seen that at91_adc_buffer_postdisable() call is not necessary but it has
been kept because it also does the book keeping for DMA. On resume path
there is no need to call at91_adc_configure_touch() as it is embedded in
at91_adc_buffer_prepare().
Fixes: 073c662017 ("iio: adc: at91-sama5d2_adc: add support for DMA")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
.read_raw()/.write_raw() could be called asynchronously from user space
or other in kernel drivers. Without locking on st->lock these could be
called asynchronously while there is a conversion in progress. Read will
be harmless but changing registers while conversion is in progress may
lead to inconsistent results. Thus, to avoid this lock st->lock.
Fixes: 27e1771908 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Fixes: 6794e23fa3 ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check return status of at91_adc_read_position() and
at91_adc_read_pressure() in at91_adc_read_info_raw().
Fixes: 6794e23fa3 ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-3-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All ADC HW versions handled by this driver (SAMA5D2, SAM9X60, SAMA7G5)
have MR.TRACKTIM on 4 bits. Fix AT91_SAMA5D2_MR_TRACKTIM_MAX to reflect
this.
Fixes: 27e1771908 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220803102855.2191070-2-claudiu.beznea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As reported by checkpatch.pl add missing names for function definition
arguments.
Signed-off-by: Joe Simmons-Talbott <joetalbott@gmail.com>
Link: https://lore.kernel.org/r/20220731160120.4831-1-joetalbott@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add Richtek rtq6056 supporting.
It can be used for the system to monitor load current and power with 16-bit
resolution.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1658242365-27797-3-git-send-email-u0084500@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If the ADC vref regulator returns an error, for example, if CONFIG_REGULATOR
is not set, the error will be used as a reference voltage.
Introduce a guard for negative return values instead of unconditionally
casting it to u32.
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Martin Larsson <martin.larsson@actia.se>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220720153136.3502440-1-martin.larsson@actia.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver use the non-managed form of the register function in
isl29028_remove(). To keep the release order as mirroring the ordering
in probe, the driver should use non-managed form in probe, too.
The following log reveals it:
[ 32.374955] isl29028 0-0010: remove
[ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[ 32.385461] Call Trace:
[ 32.385807] sysfs_unmerge_group+0x59/0x110
[ 32.386110] dpm_sysfs_remove+0x58/0xc0
[ 32.386391] device_del+0x296/0xe50
[ 32.386959] cdev_device_del+0x1d/0xd0
[ 32.387231] devm_iio_device_unreg+0x27/0xb0
[ 32.387542] devres_release_group+0x319/0x3d0
[ 32.388162] i2c_device_remove+0x93/0x1f0
Fixes: 2db5054ac2 ("staging: iio: isl29028: add runtime power management support")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220717004241.2281028-1-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After added inclination angle channels, the trigger buffer size is
insufficient. Extend the buffer size from 16 to 32 bytes, and change
the trigger buffer from the struct to a u8 array to adapt the sensor
with/without inclination angles output.
New trigger buffer data:
- SCA3300: 3 accel channels, temp, and timestamp.
- SCL3300: 3 accel channels, temp, 3 incli channels, and timestamp.
Readjustment the scan index to make it consistent with the buffer data.
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20220701023030.2527019-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_format_avail_range() should print range as follow [min, step, max], so
the function was previously calling iio_format_list() with length = 3,
length variable refers to the array size of values not the number of
elements. In case of non IIO_VAL_INT values each element has integer part
and decimal part. With length = 3 this would cause premature end of loop
and result in printing only one element.
Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Fixes: eda20ba1e2 ("iio: core: Consolidate iio_format_avail_{list,range}()")
Link: https://lore.kernel.org/r/20220718130706.32571-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If max1027_wait_eoc() fails then call iio_device_release_direct_mode()
before returning.
Fixes: a0e831653e ("iio: adc: max1027: Introduce an end of conversion helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YsbztVuAXnau2cIZ@kili
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-37-jic23@kernel.org
Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-36-jic23@kernel.org
