Commit Graph

701 Commits

Author SHA1 Message Date
Martin K. Petersen
27883605cf Merge branch '5.20/scsi-queue' into 6.0/scsi-fixes
Include commits that weren't submitted during the 6.0 merge window.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-19 17:28:54 -04:00
Brian Bunker
54249306e2 scsi: core: Allow the ALUA transitioning state enough time
The error path for the SCSI check condition of not ready, target in ALUA
state transition, will result in the failure of that path after the retries
are exhausted. In most cases that is well ahead of the transition timeout
established in the SCSI ALUA device handler.

Instead, reprep the command and re-add it to the queue after a 1 second
delay. This will allow the handler to take care of the timeout and only
fail the path if the target has exceeded the transition expiry timeout
(default 60 seconds). If the expiry timeout is exceeded, the handler will
change the path state from transitioning to standby leading to a path
failure eliminating the potential of this re-prep to continue endlessly. In
most cases the target will exit the transitioning state well before the
expiry timeout but after the retries are exhausted as mentioned.

Additionally remove the scsi_io_completion_reprep() function which provides
little value.

Link: https://lore.kernel.org/r/20220729214110.58576-1-brian@purestorage.com
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Krishna Kant <krishna.kant@purestorage.com>
Acked-by: Seamus Connor <sconnor@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-11 22:00:28 -04:00
Linus Torvalds
c993e07be0 dma-mapping updates
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy,
    Christoph Hellwig)
  - restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
  - allow the IOMMU code to communicate an optional DMA mapping length
    and use that in scsi and libata (John Garry)
  - split the global swiotlb lock (Tianyu Lan)
  - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
    Lukas Bulwahn, Robin Murphy)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmLuIYULHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPS5A//Ty1ZNyXExmwZ6J6g7/oIvQlpAHilDr22mCd8tR8Y
 Ne7TgLa/X+usFvJTxJfkvg/LNMDjD7qx0J/mhDGm4reOFcEL4/PBy0rDSOgnmntV
 k/fPhgwnpuztiAQ+s+WkJ3pkrmG1HaEId7GGj2JaoYdas6RX2mGX7vL8uvUFepjw
 lYPAqWMtJHkOfsDK0PqqyQsr7dcC6lyFLqnn/wqvHtTJeKCfGs6W/SIrlWme2SZY
 3dNx84ZR1uPjaazAmtf2IWfjh/TBmd0ETRYycgUUKRP9iwsCkBQDBwsBGSIYXiWj
 BUKQ5oMvjAlUGRF0jYz9e77KuedE6GxWiXNQstitBmid142M37DHA5tvZRf65MPS
 THHcjTDmmoaO4YfFhhXOcFOrjG4/V8bF7fgHB6XkHDjhVVTcnIx8zuOAXIVBZvIV
 VAALmamBqEfIZZrCqgr7hzFssK2bip+TIMkdoD46Wcr+D7bAlujhuzWxubn9+ulT
 23v/pAvC80ut6LvKj6EA+GpRm/pejfOtEbjXPoO2hguNxvuUKvPQqNh9hy0q+v1e
 8n2Y/4lhy5bv02S7wKooNkfCoV753jBY1TIru45UmEYc3EkTQPii6okYe0DvW4QX
 VCnKgo156wSBfE+9eWdxCROv2SZqJFMV/wL3vw54dpJQMbDy7VkNsh4mGREdUkU1
 uek=
 =Bv19
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
   Murphy, Christoph Hellwig)

 - restructure the PCIe peer to peer mapping support (Logan Gunthorpe)

 - allow the IOMMU code to communicate an optional DMA mapping length
   and use that in scsi and libata (John Garry)

 - split the global swiotlb lock (Tianyu Lan)

 - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
   Lukas Bulwahn, Robin Murphy)

* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
  swiotlb: fix passing local variable to debugfs_create_ulong()
  dma-mapping: reformat comment to suppress htmldoc warning
  PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
  RDMA/rw: drop pci_p2pdma_[un]map_sg()
  RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
  nvme-pci: convert to using dma_map_sgtable()
  nvme-pci: check DMA ops when indicating support for PCI P2PDMA
  iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
  iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
  dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
  dma-direct: support PCI P2PDMA pages in dma-direct map_sg
  dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
  PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
  PCI/P2PDMA: Attempt to set map_type if it has not been set
  lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
  swiotlb: clean up some coding style and minor issues
  dma-mapping: update comment after dmabounce removal
  scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
  ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
  scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
  ...
2022-08-06 10:56:45 -07:00
Linus Torvalds
746fc76b82 SCSI misc on 20220804
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
 mpi3mr).  The main driver change that might cause issues on down the
 road is the conversion of some of our oldest surviving drivers to the
 DMA API (should only affect m68k).  The only major core change is the
 rework of async resume; the rest are either completely trivial or for
 updating deprecated APIs.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
 e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
 krSdwsAZiV6yKg/HuPw=
 =Ak9L
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
  mpi3mr).

  The main driver change that might cause issues on down the road is the
  conversion of some of our oldest surviving drivers to the DMA API
  (should only affect m68k).

  The only major core change is the rework of async resume; the rest are
  either completely trivial or for updating deprecated APIs"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
  scsi: target: Remove XDWRITEREAD emulated support
  scsi: megaraid: Remove the static variable initialisation
  scsi: ch: Do not initialise statics to 0
  scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
  scsi: target: iscsi: Do not require target authentication
  scsi: target: iscsi: Allow AuthMethod=None
  scsi: target: iscsi: Support base64 in CHAP
  scsi: target: iscsi: Add support for extended CDB AHS
  scsi: ufs: dt-bindings: Add SC8280XP binding
  scsi: target: iscsi: Fix clang -Wformat warnings
  scsi: ufs: core: Read device property for ref clock
  scsi: libsas: Resume SAS host for phy reset or enable via sysfs
  scsi: hisi_sas: Modify v3 HW SATA completion error processing
  scsi: hisi_sas: Relocate DMA unmap of SMP task
  scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
  scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
  scsi: mpi3mr: Delete a stray tab
  scsi: mpi3mr: Unlock on error path
  scsi: mpi3mr: Reduce VD queue depth on detecting throttling
  scsi: mpi3mr: Resource Based Metering
  ...
2022-08-04 19:47:37 -07:00
John Garry
bb7d1283e6 scsi: core: cap shost max_sectors according to DMA limits only once
The shost->max_sectors is repeatedly capped according to the host DMA
mapping limit for each sdev in __scsi_init_queue(). This is unnecessary, so
set only once when adding the host.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-19 06:05:47 +02:00
Bart Van Assche
2599cac57a scsi/core: Use the new blk_opf_t type
Use the new blk_opf_t type for arguments and variables that represent
request flags. Use the !! operator in scsi_noretry_cmd() to convert the
blk_opf_t type into a boolean. This patch does not change any functionality.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-42-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 12:14:32 -06:00
Bart Van Assche
ea957547e8 scsi/core: Improve static type checking
Improve static type checking by using the new blk_opf_t type for the
combination of a request operation and its flags.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-40-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 12:14:32 -06:00
Bart Van Assche
90552cd2d1 scsi: core: Move the definition of SCSI_QUEUE_DELAY
Move the definition of SCSI_QUEUE_DELAY to just above the function that
uses it.

Link: https://lore.kernel.org/r/20220630195703.10155-2-bvanassche@acm.org
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07 17:06:39 -04:00
John Garry
deef1be18e scsi: core: Remove reserved request time-out handling
The SCSI core code does not currently support reserved commands. As such,
requests which time-out would never be reserved, and scsi_timeout()
'reserved' arg should never be set.

Remove handling for reserved requests, drop the wrapper scsi_timeout()
as it now just calls scsi_times_out() always, and finally rename
scsi_times_out() -> scsi_timeout() to match the blk_mq_ops method name.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-2-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06 06:33:53 -06:00
Christoph Hellwig
6f8191fdf4 block: simplify disk shutdown
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.

Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.

This saves an extra queue freeze for devices without a separately
allocated queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28 06:30:26 -06:00
Hannes Reinecke
b3bc1a88b5 scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
When the 'ALUA state transitioning' sense code is returned we cannot use
BLK_STS_AGAIN, as this has a very specific use-case.  So return
BLK_STS_TRANSPORT here.

Link: https://lore.kernel.org/r/20220524055631.85480-3-hare@suse.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-01 22:38:53 -04:00
John Garry
973dac8a8a scsi: core: Refine how we set tag_set NUMA node
For SCSI hosts which enable host_tagset the NUMA node returned from
blk_mq_hw_queue_to_node() is NUMA_NO_NODE always. Then, since in
scsi_mq_setup_tags() the default we choose for the tag_set NUMA node is
NUMA_NO_NODE, we always evaluate the NUMA node as NUMA_NO_NODE in functions
like blk_mq_alloc_rq_map().

The reason we get NUMA_NO_NODE from blk_mq_hw_queue_to_node() is that the
hctx_idx passed is BLK_MQ_NO_HCTX_IDX - so we can't match against a (HW)
queue mapping index.

Improve this by defaulting the tag_set NUMA node to the same NUMA node of
the SCSI host DMA dev.

Link: https://lore.kernel.org/r/1648640315-21419-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26 08:10:35 -04:00
Linus Torvalds
6f2689a766 SCSI misc on 20220324
This series consists of the usual driver updates (qla2xxx, pm8001,
 libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
 and bug fixes.  The high blast radius core update is the removal of
 write same, which affects block and several non-SCSI devices.  The
 other big change, which is more local, is the removal of the SCSI
 pointer.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
 6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
 Ec1HDuUCE18H1H2QAh0=
 =/Ty9
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...
2022-03-24 19:37:53 -07:00
Christoph Hellwig
6aded12b10 scsi: core: Remove struct scsi_request
Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.

Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:50 -05:00
Christoph Hellwig
dbb4c84d87 scsi: core: Move the result field from struct scsi_request to struct scsi_cmnd
Prepare for removing the scsi_request structure by moving the result field
to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-7-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:50 -05:00
Christoph Hellwig
a9a4ea1166 scsi: core: Move the resid_len field from struct scsi_request to struct scsi_cmnd
Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:49 -05:00
Christoph Hellwig
5b794f9807 scsi: core: Remove the sense and sense_len fields from struct scsi_request
Just use the sense_buffer field in struct scsi_cmnd for the sense data and
move the sense_len field over to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-5-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:49 -05:00
Christoph Hellwig
ce70fd9a55 scsi: core: Remove the cmd field from struct scsi_request
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage.  Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs.  On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.

Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:49 -05:00
Christoph Hellwig
71bada345b scsi: core: Don't memset() the entire scsi_cmnd in scsi_init_command()
Replace the big fat memset that requires saving and restoring various
fields with just initializing those fields that need initialization.

All the clearing to 0 is moved to scsi_prepare_cmd() as scsi_ioctl_reset()
alreadly uses kzalloc() to allocate a pre-zeroed command.

This is still conservative and can probably be optimized further.

Link: https://lore.kernel.org/r/20220224175552.988286-3-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-01 22:21:49 -05:00
Sebastian Andrzej Siewior
b84b6ec0f9 scsi: core: Add scsi_done_direct() for immediate completion
Add scsi_done_direct() which behaves like scsi_done() except that it
invokes blk_mq_complete_request_direct() in order to complete the request.

Callers from process context can complete the request directly instead
waking ksoftirqd.

Link: https://lore.kernel.org/r/Yfw7JaszshmfYa1d@flow
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07 23:14:15 -05:00
Song Liu
9574d43479 scsi: use BLK_STS_OFFLINE for not fully online devices
The new error message for such case looks like

[  172.809565] device offline error, dev sda, sector 3138208 ...

which will not be confused with regular I/O error (BLK_STS_IOERR).

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220203192827.1370270-4-song@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-03 21:10:01 -07:00
Linus Torvalds
369af20a2c SCSI misc on 20220121
This series is all the stragglers that didn't quite make the first
 merge window pull.  It's mostly minor updates and bug fixes of merge
 window code.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYetVgSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfElAQD/OZPx
 dceTIXQixYGuHhGI3Il8O5ASYQVIU86gv+jRrgEA/MN4EWj4VsYaocrUdtTCBON1
 wJYcC7VUekfNBX6KdeY=
 =DcbH
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: nsp_cs: Check of ioremap return value
  scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
  scsi: ufs: Modify Tactive time setting conditions
  scsi: efct: Remove useless DMA-32 fallback configuration
  scsi: message: fusion: mptctl: Use dma_alloc_coherent()
  scsi: message: fusion: mptsas: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
  scsi: message: fusion: mptbase: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
  scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
  scsi: megaraid: Avoid mismatched storage type sizes
  scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  scsi: aic79xx: Remove redundant error variable
  scsi: pm80xx: Port reset timeout error handling correction
  scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  scsi: mpi3mr: Fix some spelling mistakes
  scsi: mpt3sas: Update persistent trigger pages from sysfs interface
  scsi: core: Fix scsi_mode_select() interface
  scsi: aacraid: Fix spelling of "its"
  scsi: qedf: Fix potential dereference of NULL pointer
2022-01-22 10:24:02 +02:00
Damien Le Moal
81d3f500ee scsi: core: Fix scsi_mode_select() interface
The modepage argument is unused. Remove it.

Link: https://lore.kernel.org/r/20210929091744.706003-3-damien.lemoal@wdc.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-05 00:26:08 -05:00
Christoph Hellwig
b84ba30b6c block: remove the gendisk argument to blk_execute_rq
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now.  Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:41:29 -07:00
Christoph Hellwig
f3fa33acca block: remove the ->rq_disk field in struct request
Just use the disk attached to the request_queue instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:41:29 -07:00
Christoph Hellwig
79478bf9ea block: move blk_rq_err_bytes to scsi
blk_rq_err_bytes is only used by the scsi midlayer, so move it there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:34:50 -07:00
Linus Torvalds
6cbcc7ab21 SCSI misc on 20211112
This series is all the stragglers that didn't quite make the first
 merge window pull.  It's mostly minor updates and bug fixes of merge
 window code but it also has two driver updates: ufs and qla2xxx.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYY5mOyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpjAQDboVkH
 7RQblJf8AKDMjN2baSIrmbk7qEUqzRgo6Ef3egEAi044Gx4KqBwzBLiCREcFW/Mt
 F95pt5udsLypGhpfZlE=
 =fiv8
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code but it also has two driver updates: ufs and qla2xxx"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  scsi: scsi_debug: Don't call kcalloc() if size arg is zero
  scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
  scsi: scsi_ioctl: Validate command size
  scsi: ufs: ufshpb: Properly handle max-single-cmd
  scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
  scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
  scsi: sr: Remove duplicate assignment
  scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
  scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
  scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
  scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
  scsi: ufs: ufs-exynos: Factor out priv data init
  scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
  scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
  scsi: ufs: ufs-exynos: Add setup_clocks callback
  scsi: ufs: ufs-exynos: Add refclkout_stop control
  scsi: ufs: ufs-exynos: Simplify drv_data retrieval
  scsi: ufs: ufs-exynos: Change pclk available max value
  scsi: ufs: Add quirk to enable host controller without PH configuration
  scsi: ufs: Add quirk to handle broken UIC command
  ...
2021-11-12 12:25:50 -08:00
Linus Torvalds
3e28850cbd for-5.16/block-2021-11-09
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmGKqAcQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpojrD/4yA+GgV+jWeIepYWvU81TQFpt9AJmzWbrY
 uryj4dy7EdMjun+JkAP8k4qreqvTZRsJMkr9dhmS4qaM8/Vt8K/RU/0n/lxNVmqc
 1//ZaTS6DURVAc52GHIXD3q4cv8pHofTZZlrj1Hgz35shlOayStGJtktH5f8uQl4
 5Yxjh+HKr15Chym+fKlbR6T7BgVxxNyhT9q89BgUwMAJX+1KRVtwtkyVK5IbObFy
 zOeiC+n9niQ6iJHcLoqb7LjfBOs/VjdNOQYGSCAnrBxuQ8GnEP2xDw2nvFlOPE12
 5tWEwTgAX7381ilbL6VvNTlTafIs/Axt8mI0cY/OMW7ApiHwO3rXjQSqA4yrnKCJ
 h6M1QavqThd2DtMnOi0U5wwgtD2UjS+CMpK5XFxeIyl6GqTgZcaWm3VqRnG68KZD
 r5+o99GKWCHy0cckxq2WiWJouReeNZ9u9R6HNDw0Vb8UNyWgBR+v2MkX+SHS/c85
 2gXm10hwBH7BFnC4X8ceiuT/bm7xm9S6D/3LCVitlUTBRfqobsQEQjSciPeoOtL0
 rRSTKob7jtokiB2q01wx3q1jnUMpxE1fqJkpLjUvebTzw+a+xfPwy0nNTGq0XXIv
 WMVRRpSWCZm04Ru0q/K8cj0GOyur5x+ilefZ1V+/sRU5dVmGuJgbJUxei1HPC6eV
 z9Rn0aFv4g==
 =1GPi
 -----END PGP SIGNATURE-----

Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Set of fixes for the batched tag allocation (Ming, me)

 - add_disk() error handling fix (Luis)

 - Nested queue quiesce fixes (Ming)

 - Shared tags init error handling fix (Ye)

 - Misc cleanups (Jean, Ming, me)

* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
  nvme: wait until quiesce is done
  scsi: make sure that request queue queiesce and unquiesce balanced
  scsi: avoid to quiesce sdev->request_queue two times
  blk-mq: add one API for waiting until quiesce is done
  blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
  block: fix device_add_disk() kobject_create_and_add() error handling
  block: ensure cached plug request matches the current queue
  block: move queue enter logic into blk_mq_submit_bio()
  block: make bio_queue_enter() fast-path available inline
  block: split request allocation components into helpers
  block: have plug stored requests hold references to the queue
  blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
  blk-mq: add RQF_ELV debug entry
  blk-mq: only try to run plug merge if request has same queue with incoming bio
  block: move RQF_ELV setting into allocators
  dm: don't stop request queue after the dm device is suspended
  block: replace always false argument with 'false'
  block: assign correct tag before doing prefetch of request
  blk-mq: fix redundant check of !e expression
2021-11-09 11:20:07 -08:00
Ming Lei
93542fbfa7 scsi: make sure that request queue queiesce and unquiesce balanced
For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two call balanced.

It isn't easy to audit that in all scsi drivers, especially the two may
be called from different contexts, so do it in scsi core with one
per-device atomic variable to balance quiesce and unquiesce.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-09 08:14:27 -07:00
Ming Lei
d2b9f12b0f scsi: avoid to quiesce sdev->request_queue two times
For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two to be balanced.

blk_mq_quiesce_queue() calls blk_mq_quiesce_queue_nowait() for updating
quiesce depth and marking the flag, then scsi_internal_device_block() calls
blk_mq_quiesce_queue_nowait() two times actually.

Fix the double quiesce and keep quiesce and unquiesce balanced.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-09 08:14:27 -07:00
Linus Torvalds
fe91c4725a SCSI misc on 20211105
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
 target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
 fixes.  Notable core changes are the removal of scsi->tag which caused
 some churn in obsolete drivers and a sweep through all drivers to call
 scsi_done() directly instead of scsi->done() which removes a pointer
 indirection from the hot path and a move to register core sysfs files
 earlier, which means they're available to KOBJ_ADD processing, which
 necessitates switching all drivers to using attribute groups.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
 vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
 RG8vBdpxMudlvxAPi/A=
 =BSFz
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...
2021-11-05 08:42:02 -07:00
Tadeusz Struk
703535e6ae scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
No need to deduce command size in scsi_setup_scsi_cmnd() anymore as
appropriate checks have been added to scsi_fill_sghdr_rq() function and the
cmd_len should never be zero here.  The code to do that wasn't correct
anyway, as it used uninitialized cmd->cmnd, which caused a null-ptr-deref
if the command size was zero as in the trace below. Fix this by removing
the unneeded code.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1822 Comm: repro Not tainted 5.15.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
Call Trace:
 blk_mq_dispatch_rq_list+0x7c7/0x12d0
 __blk_mq_sched_dispatch_requests+0x244/0x380
 blk_mq_sched_dispatch_requests+0xf0/0x160
 __blk_mq_run_hw_queue+0xe8/0x160
 __blk_mq_delay_run_hw_queue+0x252/0x5d0
 blk_mq_run_hw_queue+0x1dd/0x3b0
 blk_mq_sched_insert_request+0x1ff/0x3e0
 blk_execute_rq_nowait+0x173/0x1e0
 blk_execute_rq+0x15c/0x540
 sg_io+0x97c/0x1370
 scsi_ioctl+0xe16/0x28e0
 sd_ioctl+0x134/0x170
 blkdev_ioctl+0x362/0x6e0
 block_ioctl+0xb0/0xf0
 vfs_ioctl+0xa7/0xf0
 do_syscall_64+0x3d/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace 8b086e334adef6d2 ]---
Kernel panic - not syncing: Fatal exception

Link: https://lore.kernel.org/r/20211103170659.22151-2-tadeusz.struk@linaro.org
Fixes: 2ceda20f0a ("scsi: core: Move command size detection out of the fast path")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.15, 5.14, 5.10
Reported-by: syzbot+5516b30f5401d4dcbcae@syzkaller.appspotmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-04 22:42:49 -04:00
Ewan D. Milne
5ae17501bc scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
The changes to issue the abort from the scmd->abort_work instead of the EH
thread introduced a problem if eh_deadline is used.  If aborting the
command(s) is successful, and there are never any scmds added to the
shost->eh_cmd_q, there is no code path which will reset the ->last_reset
value back to zero.

The effect of this is that after a successful abort with no EH thread
activity, a subsequent timeout, perhaps a long time later, might
immediately be considered past a user-set eh_deadline time, and the host
will be reset with no attempt at recovery.

Fix this by resetting ->last_reset back to zero in scmd_eh_abort_handler()
if it is determined that the EH thread will not run to do this.

Thanks to Gopinath Marappan for investigating this problem.

Link: https://lore.kernel.org/r/20211029194311.17504-2-emilne@redhat.com
Fixes: e494f6a728 ("[SCSI] improved eh timeout handler")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-03 21:33:50 -04:00
Christoph Hellwig
0bf6d96cb8 block: remove blk_{get,put}_request
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-29 06:50:52 -06:00
Christoph Hellwig
4845012eb5 block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
Export scsi_device_from_queue for use with pktcdvd and use that instead
of the otherwise unused QUEUE_FLAG_SCSI_PASSTHROUGH queue flag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22 08:33:57 -06:00
Christoph Hellwig
68ec3b819a scsi: add a scsi_alloc_request helper
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.

Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22 08:33:57 -06:00
Jens Axboe
5a72e899ce block: add a struct io_comp_batch argument to fops->iopoll()
struct io_comp_batch contains a list head and a completion handler, which
will allow completions to more effciently completed batches of IO.

For now, no functional changes in this patch, we just define the
io_comp_batch structure and add the argument to the file_operations iopoll
handler.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:40:40 -06:00
Christoph Hellwig
fe45e630a1 block: move integrity handling out of <linux/blkdev.h>
Split the integrity/metadata handling definitions out into a new header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:02 -06:00
Bart Van Assche
11b68e36b1 scsi: core: Call scsi_done directly
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly. Since this patch removes the last user of the
scsi_done member, also remove that data structure member.

Link: https://lore.kernel.org/r/20211007204618.2196847-11-bvanassche@acm.org
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:31:43 -04:00
Bart Van Assche
a710eacb9d scsi: core: Rename scsi_mq_done() into scsi_done() and export it
Since the removal of the legacy block layer there is only one completion
function left in the SCSI core, namely scsi_mq_done(). Rename it into
scsi_done(). Export that function to allow SCSI LLDs to call it directly.

Link: https://lore.kernel.org/r/20211007202923.2174984-3-bvanassche@acm.org
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:28:43 -04:00
Bart Van Assche
bf23e61903 scsi: core: Use a structure member to track the SCSI command submitter
Conditional statements are faster than indirect calls. Use a structure
member to track the SCSI command submitter such that later patches can call
scsi_done(scmd) instead of scmd->scsi_done(scmd).

The asymmetric behavior that scsi_send_eh_cmnd() sets the submission
context to the SCSI error handler and that it does not restore the
submission context to the SCSI core is retained.

Link: https://lore.kernel.org/r/20211007202923.2174984-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:28:43 -04:00
Bart Van Assche
e9076e7f23 scsi: core: Fix spelling in a source code comment
The typo in this source code comment makes the comment confusing. Clear up
the confusion by fixing the typo.

Link: https://lore.kernel.org/r/20210929182318.2060489-1-bvanassche@acm.org
Fixes: bc85dc500f ("scsi: remove scsi_end_request")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 21:39:57 -04:00
Damien Le Moal
a7d6840bed scsi: core: Fix scsi_mode_select() buffer length handling
The MODE SELECT(6) command allows handling mode page buffers that are up to
255 bytes, including the 4 byte header needed in front of the page
buffer. For requests larger than this limit, automatically use the MODE
SELECT(10) command.

In both cases, since scsi_mode_select() adds the mode select page header,
checks on the buffer length value must include this header size to avoid
overflows of the command CDB allocation length field.

While at it, use put_unaligned_be16() for setting the header block
descriptor length and CDB allocation length when using MODE SELECT(10).

[mkp: fix MODE SENSE vs. MODE SELECT confusion]

Link: https://lore.kernel.org/r/20210820070255.682775-3-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-29 00:10:57 -04:00
Damien Le Moal
17b49bcbf8 scsi: core: Fix scsi_mode_sense() buffer length handling
Several problems exist with scsi_mode_sense() buffer length handling:

 1) The allocation length field of the MODE SENSE(10) command is 16-bits,
    occupying bytes 7 and 8 of the CDB. With this command, access to mode
    pages larger than 255 bytes is thus possible. However, the CDB
    allocation length field is set by assigning len to byte 8 only, thus
    truncating buffer length larger than 255.

 2) If scsi_mode_sense() is called with len smaller than 8 with
    sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
    is increased to 8 and 4 respectively, and the buffer is zero filled
    with these increased values, thus corrupting the memory following the
    buffer.

Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.

Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.

While at it, also fix the folowing:

 * Use get_unaligned_be16() to retrieve the mode data length and block
   descriptor length fields of the mode sense reply header instead of using
   an open coded calculation.

 * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
   Block Descriptor, which is the opposite of what the dbd argument
   description was.

Link: https://lore.kernel.org/r/20210820070255.682775-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-29 00:10:57 -04:00
John Garry
4c7b6ea336 scsi: core: Remove scsi_cmnd.tag
It is never read, so get rid of it.

Link: https://lore.kernel.org/r/1628862553-179450-4-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-17 22:28:39 -04:00
Bart Van Assche
2266a2def9 scsi: core: Remove the request member from struct scsi_cmnd
Since all scsi_cmnd.request users are gone, remove the request pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20210809230355.8186-53-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:42 -04:00
Bart Van Assche
aa8e25e500 scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Cast away constness where necessary when passing a SCSI command
pointer to scsi_cmd_to_rq(). This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:37 -04:00
Christoph Hellwig
2cece37784 scsi: scsi_ioctl: Remove scsi_req_init()
Merge scsi_req_init() into its only caller.

Link: https://lore.kernel.org/r/20210724072033.1284840-16-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-28 22:24:26 -04:00
Bart Van Assche
422969bbb5 scsi: core: Fix the documentation of the scsi_execute() time parameter
The unit of the scsi_execute() timeout parameter is 1/HZ seconds instead of
one second, just like the timeouts used in the block layer. Fix the
documentation header above the definition of the scsi_execute() macro.

Link: https://lore.kernel.org/r/20210709202638.9480-3-bvanassche@acm.org
Fixes: "[SCSI] use scatter lists for all block pc requests and simplify hw handlers" # v2.6.16.28
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12 21:40:21 -04:00
Linus Torvalds
8b9cc17a46 SCSI misc on 20210711
This is a set of minor fixes and clean ups in the core and various
 drivers.  The only core change in behaviour is the I/O retry for
 spinup notify, but that shouldn't impact anything other than the
 failing case.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYOqWWyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYBtAQCpqVdl
 Axi1SpD6/UuKOgRmboWscoKD8FLHwvLDMRyCRQEAnLu3XdB9HcQrwZOkTG14vrfB
 q2XB5cP4XAITxFLN1qo=
 =9AO9
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...
2021-07-11 10:59:53 -07:00