1
0
mirror of https://github.com/torvalds/linux.git synced 2024-12-15 07:33:56 +00:00
Commit Graph

970 Commits

Author SHA1 Message Date
Juergen Gross
3f9dfbebdc virtio: replace arch_has_restricted_virtio_memory_access()
Instead of using arch_has_restricted_virtio_memory_access() together
with CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, replace those
with platform_has() and a new platform feature
PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov <bp@suse.de>
2022-06-06 08:22:01 +02:00
Linus Torvalds
4ab6cfc4ad more s390 updates for 5.19 merge window
- Add Eric Farman as maintainer for s390 virtio drivers.
 
 - Improve machine check handling, and avoid incorrectly injecting a machine
   check into a kvm guest.
 
 - Add cond_resched() call to gmap page table walker in order to avoid
   possible huge latencies. Also use non-quiesing sske instruction to speed
   up storage key handling.
 
 - Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves similar like
   common code.
 
 - Get sie control block address from correct stack slot in perf event
   code. This fixes potential random memory accesses.
 
 - Change uaccess code so that the exception handler sets the result of
   get_user() and __get_kernel_nofault() to zero in case of a fault. Until
   now this was done via input parameters for inline assemblies. Doing it
   via fault handling is what most or even all other architectures are
   doing.
 
 - Couple of other small cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmKZ2IMACgkQIg7DeRsp
 bsIXgg/+JeKOFIfwWWZuk2/2drITjQxWL6OwAV/vHVL9bYVGGRgFHTfF7Qslr2Hb
 j/kh55hajjMt00bVS6P52I7cC+xB6PcxPK4jF+u2FXcL187QnWZg7VD7qkFO3E7Q
 G5jiWub0eNfd3ijytzSO1yLwv3Rh6GEIOi7lRkk88Fe2B9l0AaXbvnr7rrIoG1SS
 TCPUoCCNKEH+xPmujdN5B6CDK2ldukcPZHtAJ9Qxu6DWAWIxh+hHr/c1zW9/7kDj
 Vogc3gcgApeXTsMZu38c2tFiv6wxvg37cMa0EW+l5zkyeFn+a1CLSxA/qPi0N1UY
 pFcxrlWXWshr7vKn16lJoCe1nBVyfb9ohToLKQtnWB7RZ86lP79tVjOpiQ4qi+jl
 54yx/rdtycEDaC0w4ab5kfZPc9/EeaY4ppaOLjh4+r/Ve3x+EMcAZ9Q2Ei3ltRBy
 75kswnRvHDWMbtS8rNecdk29QNRvLpnzpGLWQ4wGCV7V9FzTtJwO5mdjuibhSoI8
 9dZw4/HGMeA2P1pAE/d1YqKbdgqlNzDyU1dYpk6PVBI0I9mUu36eZXQnjrBN++ki
 8TWQYkBv6vnUHJmkfEK7B/thYwljzlQJSje4ebj0aPWzBJ9An+U5ozoANlAu97MR
 /EVZM67snrT6aSOjhF6SNjWqMGBOlMVecF+GCsVrFEeah+qrYq4=
 =BOi4
 -----END PGP SIGNATURE-----

Merge tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:
 "Just a couple of small improvements, bug fixes and cleanups:

   - Add Eric Farman as maintainer for s390 virtio drivers.

   - Improve machine check handling, and avoid incorrectly injecting a
     machine check into a kvm guest.

   - Add cond_resched() call to gmap page table walker in order to avoid
     possible huge latencies. Also use non-quiesing sske instruction to
     speed up storage key handling.

   - Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves
     similar like common code.

   - Get sie control block address from correct stack slot in perf event
     code. This fixes potential random memory accesses.

   - Change uaccess code so that the exception handler sets the result
     of get_user() and __get_kernel_nofault() to zero in case of a
     fault. Until now this was done via input parameters for inline
     assemblies. Doing it via fault handling is what most or even all
     other architectures are doing.

   - Couple of other small cleanups and fixes"

* tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/stack: add union to reflect kvm stack slot usages
  s390/stack: merge empty stack frame slots
  s390/uaccess: whitespace cleanup
  s390/uaccess: use __noreturn instead of __attribute__((noreturn))
  s390/uaccess: use exception handler to zero result on get_user() failure
  s390/uaccess: use symbolic names for inline assembler operands
  s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag
  s390/mm: use non-quiescing sske for KVM switch to keyed guest
  s390/gmap: voluntarily schedule during key setting
  MAINTAINERS: Update s390 virtio-ccw
  s390/kexec: add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP
  s390/Kconfig.debug: fix indentation
  s390/Kconfig: fix indentation
  s390/perf: obtain sie_block from the right address
  s390: generate register offsets into pt_regs automatically
  s390: simplify early program check handler
  s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
2022-06-03 13:57:50 -07:00
Heiko Carstens
454ede3f14 s390/uaccess: use exception handler to zero result on get_user() failure
Historically the uaccess code pre-initializes the result of get_user()
(and now also __get_kernel_nofault()) to zero and uses the result as
input parameter for inline assemblies. This is different to what most,
if not all, other architectures are doing, which set the result to
zero within the exception handler in case of a fault.

Use the new extable mechanism and handle zeroing of the result within
the exception handler in case of a fault.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-06-01 12:03:17 +02:00
Christian Borntraeger
3ae11dbcfa s390/mm: use non-quiescing sske for KVM switch to keyed guest
The switch to a keyed guest does not require a classic sske as the other
guest CPUs are not accessing the key before the switch is complete.
By using the NQ SSKE things are faster especially with multiple guests.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220530092706.11637-3-borntraeger@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-06-01 12:03:16 +02:00
Christian Borntraeger
6d5946274d s390/gmap: voluntarily schedule during key setting
With large and many guest with storage keys it is possible to create
large latencies or stalls during initial key setting:

rcu: INFO: rcu_sched self-detected stall on CPU
rcu:   18-....: (2099 ticks this GP) idle=54e/1/0x4000000000000002 softirq=35598716/35598716 fqs=998
       (t=2100 jiffies g=155867385 q=20879)
Task dump for CPU 18:
CPU 1/KVM       R  running task        0 1030947 256019 0x06000004
Call Trace:
sched_show_task
rcu_dump_cpu_stacks
rcu_sched_clock_irq
update_process_times
tick_sched_handle
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
do_IRQ
ext_int_handler
ptep_zap_key

The mmap lock is held during the page walking but since this is a
semaphore scheduling is still possible. Same for the kvm srcu.
To minimize overhead do this on every segment table entry or large page.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220530092706.11637-2-borntraeger@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-06-01 12:03:16 +02:00
Linus Torvalds
3f306ea2e1 dma-mapping updates for Linux 5.19
- don't over-decrypt memory (Robin Murphy)
  - takes min align mask into account for the swiotlb max mapping size
    (Tianyu Lan)
  - use GFP_ATOMIC in dma-debug (Mikulas Patocka)
  - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
  - don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
  - cleanup swiotlb initialization and share more code with swiotlb-xen
    (me, Stefano Stabellini)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmKObTQLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYObmA//dIcDB/q4iFGD+WJh4MhM+asx0ZsdF2OJz42WEhgT
 Z9duOrgcneEQundCamqJP9rNTs980LHDA8uWQC5rZEc9vxuRVOdS7bSgYRUwWh6B
 r0ZjOsvQCn+ChoZML8uyk4rfmEINq+EvJuec3G5fgecZOhPuJS2i2uzzv5cHwqgP
 ChC0fwyZlkfdECXgvZXbEoCJLfTgGNlziN6Ai8dirSoqgEQUoCsY89/M7OiEBvV2
 R4XUWD7OvQERfB4t6xLuUHyzf9PAuWB+OiblRVNeAmK3lMjxVrc3k4kIowgklnzD
 8hfmphAa9Zou3zdfi6Gd4fiQRHRVOwKVp1rtqUmJ+lPSiwyMzu64z9ld2+2qac0h
 V4sSr/yJkhxnBT4/0MkTChvhnRobisackpUzNRpiM4ck7cNVb7eAvkISsbH+pWI9
 aEexPhbyskjlV+GOyM4QL4ygG0dpXY0HSyoh6uaSVsaXMycnWIsJCPidXxV1HGV0
 q2/RLHuHwYxia8cYCF01/DQvwOKSjwbU0zModxtRezGD5GYh2C0a+SrA1aX+qiTu
 yGJCs2UHtSQstAt78tTVp499YeDeL/oGSQkPAu8zyRkSczzF+CncGTuXyoJbAWyK
 otcgERWljgZ4scxjfu1uacfoVhKQ7nOu7hiJokL0U80FESAennLC3ZlocvB9h/ff
 HNA=
 =n2rk
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - don't over-decrypt memory (Robin Murphy)

 - takes min align mask into account for the swiotlb max mapping size
   (Tianyu Lan)

 - use GFP_ATOMIC in dma-debug (Mikulas Patocka)

 - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)

 - don't fail on highmem CMA pages in dma_direct_alloc_pages (me)

 - cleanup swiotlb initialization and share more code with swiotlb-xen
   (me, Stefano Stabellini)

* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
  dma-direct: don't over-decrypt memory
  swiotlb: max mapping size takes min align mask into account
  swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
  swiotlb: use the right nslabs value in swiotlb_init_remap
  swiotlb: don't panic when the swiotlb buffer can't be allocated
  dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
  dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
  swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
  x86: remove cruft from <asm/dma-mapping.h>
  swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
  swiotlb: merge swiotlb-xen initialization into swiotlb
  swiotlb: provide swiotlb_init variants that remap the buffer
  swiotlb: pass a gfp_mask argument to swiotlb_init_late
  swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
  swiotlb: make the swiotlb_init interface more useful
  x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
  x86: remove the IOMMU table infrastructure
  MIPS/octeon: use swiotlb_init instead of open coding it
  arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
  swiotlb: rename swiotlb_late_init_with_default_size
  ...
2022-05-25 19:18:36 -07:00
Linus Torvalds
95fbef17e8 s390 updates for 5.19 merge window
- Make use of the IBM z16 processor activity instrumentation facility
   to count cryptography operations: add a new PMU device driver so
   that perf can make use of this.
 
 - Add new IBM z16 extended counter set to cpumf support.
 
 - Add vdso randomization support.
 
 - Add missing KCSAN instrumentation to barriers and spinlocks, which
   should make s390's KCSAN support complete.
 
 - Add support for IPL-complete-control facility: notify the hypervisor
   that kexec finished work and the kernel starts.
 
 - Improve error logging for PCI.
 
 - Various small changes to workaround llvm's integrated assembler
   limitations, and one bug, to make it finally possible to compile the
   kernel with llvm's integrated assembler. This also requires to raise
   the minimum clang version to 14.0.0.
 
 - Various other small enhancements, bug fixes, and cleanups all over
   the place.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmKLedYACgkQIg7DeRsp
 bsKDfA//TR/8jyyrNs75VDUPiS0UgMgHfjinQqLa8qwaQxCxA0J31I9nYiDxSfp/
 E8hTCLyARnPX0YpcLCEI0ChC6Ad+LElGr6kctdV0FTQopRVreVRKYe2bmrsvXNqs
 4OzFNGZ8mnvMMSi1IQ/A7Yq/DZjbEON5VfY3iJv8djyC7qVNDgngdiQxtIJ+3eq/
 77pw3VEgtuI2lVC3O9fEsdqRUyB5UHS3GSknmc8+KuRmOorir0JwMvxQ9xARZJYE
 6FbTnSDW1YGI6TBoa/zFberqsldU/qJzo40JmPr27a2qbEmysc8kw60r+cIFsxgC
 H432/aS9102CnsocaY7CtOvs+TLAK8dYeU31enxUGXnICMJ0MuuqnNnAfHrJziVs
 ZnK3iUfPmMMewYfSefn8Sk87kJR5ggGePF++44GEqd87lRwZUnC+hd19dNtzzgSx
 Br4dRYrdQl+w2nqBHGCGW2288svtiPHslnhaQqy343fS9q0o3Mebqx1e9be7t9/K
 IDFQ00Cd3FS2jhphCbCrq2vJTmByhTQqCiNoEJ6vZK2B3ksrJUotfdwI+5etE2Kj
 8sOPwOPyIAI9HnXFVknGIl/u5kaPuHazkZu6u3Or0miVZYw01pov1am0ArcFjeMX
 /4Js/lI4O/wXvRzVk0rILrAZFDirAHvqqx+aI20cegTQU2C8mHY=
 =W+1k
 -----END PGP SIGNATURE-----

Merge tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

 - Make use of the IBM z16 processor activity instrumentation facility
   to count cryptography operations: add a new PMU device driver so that
   perf can make use of this.

 - Add new IBM z16 extended counter set to cpumf support.

 - Add vdso randomization support.

 - Add missing KCSAN instrumentation to barriers and spinlocks, which
   should make s390's KCSAN support complete.

 - Add support for IPL-complete-control facility: notify the hypervisor
   that kexec finished work and the kernel starts.

 - Improve error logging for PCI.

 - Various small changes to workaround llvm's integrated assembler
   limitations, and one bug, to make it finally possible to compile the
   kernel with llvm's integrated assembler. This also requires to raise
   the minimum clang version to 14.0.0.

 - Various other small enhancements, bug fixes, and cleanups all over
   the place.

* tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390/head: get rid of 31 bit leftovers
  scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390
  s390/boot: do not emit debug info for assembly with llvm's IAS
  s390/boot: workaround llvm IAS bug
  s390/purgatory: workaround llvm's IAS limitations
  s390/entry: workaround llvm's IAS limitations
  s390/alternatives: remove padding generation code
  s390/alternatives: provide identical sized orginal/alternative sequences
  s390/cpumf: add new extended counter set for IBM z16
  s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
  s390/stp: clock_delta should be signed
  s390/stp: fix todoff size
  s390/pai: add support for cryptography counters
  entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
  s390/compat: cleanup compat_linux.h header file
  s390/entry: remove broken and not needed code
  s390/boot: convert parmarea to C
  s390/boot: convert initial lowcore to C
  s390/ptrace: move short psw definitions to ptrace header file
  s390/head: initialize all new psws
  ...
2022-05-23 21:01:30 -07:00
Christian Borntraeger
a06afe8383 KVM: s390: vsie/gmap: reduce gmap_rmap overhead
there are cases that trigger a 2nd shadow event for the same
vmaddr/raddr combination. (prefix changes, reboots, some known races)
This will increase memory usages and it will result in long latencies
when cleaning up, e.g. on shutdown. To avoid cases with a list that has
hundreds of identical raddrs we check existing entries at insert time.
As this measurably reduces the list length this will be faster than
traversing the list at shutdown time.

In the long run several places will be optimized to create less entries
and a shrinker might be necessary.

Fixes: 4be130a084 ("s390/mm: add shadow gmap support")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20220429151526.1560-1-borntraeger@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-03 15:15:44 +02:00
Sven Schnelle
f2f47d0ef7 s390/mmap: increase stack/mmap gap to 128MB
This basically reverts commit 9e78a13bfb ("[S390] reduce miminum
gap between stack and mmap_base"). 32MB is not enough space
between stack and mmap for some programs. Given that compat
task aren't common these days, lets revert back to 128MB.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-04-25 13:54:14 +02:00
Christoph Hellwig
c6af2aa9ff swiotlb: make the swiotlb_init interface more useful
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.

Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-18 07:21:11 +02:00
Vasily Gorbik
731efc9613 s390: convert ".insn" encoding to instruction names
With z10 as minimum supported machine generation many ".insn" encodings
could be now converted to instruction names. There are couple of exceptions
- stfle is used from the als code built for z900 and cannot be converted
- few ".insn" directives encode unsupported instruction formats

The generated code is identical before/after this change.

Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-10 15:58:17 +01:00
Vasily Gorbik
4efd417f29 s390: raise minimum supported machine generation to z10
Machine generations up to z9 (released in May 2006) have been officially
out of service for several years now (z9 end of service - January 31, 2019).
No distributions build kernels supporting those old machine generations
anymore, except Debian, which seems to pick the oldest supported
generation. The team supporting Debian on s390 has been notified about
the change.

Raising minimum supported machine generation to z10 helps to reduce
maintenance cost and effectively remove code, which is not getting
enough testing coverage due to lack of older hardware and distributions
support. Besides that this unblocks some optimization opportunities and
allows to use wider instruction set in asm files for future features
implementation. Due to this change spectre mitigation and usercopy
implementations could be drastically simplified and many newer instructions
could be converted from ".insn" encoding to instruction names.

Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-10 15:58:17 +01:00
Heiko Carstens
484a8ed8b7 s390/extable: add dedicated uaccess handler
This is more or less a combination of commit 2e77a62cb3 ("arm64:
extable: add a dedicated uaccess handler") and commit 4b5305decc
("x86/extable: Extend extable functionality").

To describe the problem that needs to solved let's cite the full arm64
commit message:

------
For inline assembly, we place exception fixups out-of-line in the
`.fixup` section such that these are out of the way of the fast path.
This has a few drawbacks:

* Since the fixup code is anonymous, backtraces will symbolize fixups
  as offsets from the nearest prior symbol, currently
  `__entry_tramp_text_end`. This is confusing, and painful to debug
  without access to the relevant vmlinux.

* Since the exception handler adjusts the PC to execute the fixup, and
  the fixup uses a direct branch back into the function it fixes,
  backtraces of fixups miss the original function. This is confusing,
  and violates requirements for RELIABLE_STACKTRACE (and therefore
  LIVEPATCH).

* Inline assembly and associated fixups are generated from templates,
  and we have many copies of logically identical fixups which only
  differ in which specific registers are written to and which address
  is branched to at the end of the fixup. This is potentially wasteful
  of I-cache resources, and makes it hard to add additional logic to
  fixups without significant bloat.

This patch address all three concerns for inline uaccess fixups by
adding a dedicated exception handler which updates registers in
exception context and subsequent returns back into the function which
faulted, removing the need for fixups specialized to each faulting
instruction.

Other than backtracing, there should be no functional change as a result
of this patch.
------

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Heiko Carstens
3d66718cd6 s390/extable: convert to relative table with data
Follow arm64, riscv, and x86 and change extable layout to common
"relative table with data". This allows to get rid of s390 specific
code in sorttable.c.

The main difference to before is that extable entries do not contain a
relative function pointer anymore. Instead data and type fields are
added.

The type field is used to indicate which exception handler needs to be
called, while the data field is currently unused.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Heiko Carstens
46fee16f57 s390/extable: add and use fixup_exception helper function
Add and use fixup_exception helper function in order to remove the
duplicated exception handler fixup code at several places.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Heiko Carstens
0741ec112c s390/extable: move extable related functions to mm/extable.c
Just like arm64, riscv, and x86 move extable related functions to
mm/extable.c. This is currently only one function, but this will
change with subsequent changes.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Heiko Carstens
d09a307fde s390/extable: move EX_TABLE define to asm-extable.h
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.

Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Heiko Carstens
1952954569 s390/extable: search amode31 extable last
It is very unlikely that an exception happens within the amode31 text
section, therefore safe a couple of cycles for the common case, and
search the amode31 extable last.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08 00:33:00 +01:00
Heiko Carstens
e1fc74ff23 s390/mm,gmap: don't use pte_val()/pXd_val() as lvalue
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.

Therefore a construct like this:

        pte_val(*pte) = __pa(addr) | prot;

which would directly write into a page table, isn't possible anymore
with the last step of this series.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01 21:05:10 +01:00
Heiko Carstens
933b7253ad s390/mm,hugetlb: don't use pte_val()/pXd_val() as lvalue
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.

Therefore a construct like this:

        pte_val(*pte) = __pa(addr) | prot;

which would directly write into a page table, isn't possible anymore
with the last step of this series.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01 21:05:10 +01:00
Heiko Carstens
869a9dbc10 s390/mm,pageattr: don't use pte_val()/pXd_val() as lvalue
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.

Therefore a construct like this:

        pte_val(*pte) = __pa(addr) | prot;

which would directly write into a page table, isn't possible anymore
with the last step of this series.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01 21:05:10 +01:00
Heiko Carstens
4a366f519a s390/mm,pgtable: don't use pte_val()/pXd_val() as lvalue
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.

Therefore a construct like this:

        pte_val(*pte) = __pa(addr) | prot;

which would directly write into a page table, isn't possible anymore
with the last step of this series.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01 21:05:10 +01:00
Heiko Carstens
b8e3b37900 s390/mm: use set_pXd()/set_pte() helper functions everywhere
Use the new set_pXd()/set_pte() helper functions at all places where
page table entries are modified.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01 21:05:10 +01:00
Heiko Carstens
f413f685c6 s390/mm: use CRST_ALLOC_ORDER instead of number
Use CRST_ALLOC_ORDER to make it more obvious what the order means,
and also to be consistent with other code, e.g. the vmemmap code.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09 22:56:04 +01:00
Alexander Gordeev
303fd988ed s390/maccess: fix semantics of memcpy_real() and its callers
There is a confusion with regard to the source address of
memcpy_real() and calling functions. While the declared
type for a source assumes a virtual address, in fact it
always called with physical address of the source.

This confusion led to bugs in copy_oldmem_kernel() and
copy_oldmem_user() functions, where __pa() macro applied
mistakenly to physical addresses. It does not lead to a
real issue, since virtual and physical addresses are
currently the same.

Fix both the bugs and memcpy_real() prototype by making
type of source address consistent to the function name
and the way it actually used.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09 22:56:04 +01:00
Alexander Gordeev
1f231e2950 s390/maccess: fix absolute lowcore virtual vs physical address confusion
Due to historical reasons memcpy_absolute() and friend functions
misuse the notion of physical vs virtual addresses difference.

Note: this does not fix a bug currently, since virtual and physical
addresses are identical.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06 23:31:29 +01:00
Heiko Carstens
f36e7c9845 s390: remove invalid email address of Heiko Carstens
Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06 23:31:29 +01:00
Linus Torvalds
f56caedaf9 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
 "146 patches.

  Subsystems affected by this patch series: kthread, ia64, scripts,
  ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
  dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
  memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
  userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
  ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
  damon)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
  mm/damon: hide kernel pointer from tracepoint event
  mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
  mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
  mm/damon/dbgfs: remove an unnecessary variable
  mm/damon: move the implementation of damon_insert_region to damon.h
  mm/damon: add access checking for hugetlb pages
  Docs/admin-guide/mm/damon/usage: update for schemes statistics
  mm/damon/dbgfs: support all DAMOS stats
  Docs/admin-guide/mm/damon/reclaim: document statistics parameters
  mm/damon/reclaim: provide reclamation statistics
  mm/damon/schemes: account how many times quota limit has exceeded
  mm/damon/schemes: account scheme actions that successfully applied
  mm/damon: remove a mistakenly added comment for a future feature
  Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
  Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
  Docs/admin-guide/mm/damon/usage: remove redundant information
  Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
  mm/damon: convert macro functions to static inline functions
  mm/damon: modify damon_rand() macro to static inline function
  mm/damon: move damon_rand() definition into damon.h
  ...
2022-01-15 20:37:06 +02:00
Qi Zheng
36ef159f44 mm: remove redundant check about FAULT_FLAG_ALLOW_RETRY bit
Since commit 4064b98270 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:

	flags & FAULT_FLAG_ALLOW_RETRY

So just remove it.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 16:30:27 +02:00
Linus Torvalds
8efd0d9c31 Networking changes for 5.17.
Core
 ----
 
  - Defer freeing TCP skbs to the BH handler, whenever possible,
    or at least perform the freeing outside of the socket lock section
    to decrease cross-CPU allocator work and improve latency.
 
  - Add netdevice refcount tracking to locate sources of netdevice
    and net namespace refcount leaks.
 
  - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
    all queues from a single CPU removing latency spikes.
 
  - Various small optimizations throughout the stack from Eric Dumazet.
 
  - Make netdev->dev_addr[] constant, force modifications to go via
    appropriate helpers to allow us to keep addresses in ordered data
    structures.
 
  - Replace unix_table_lock with per-hash locks, improving performance
    of bind() calls.
 
  - Extend skb drop tracepoint with a drop reason.
 
  - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
 
 BPF
 ---
 
  - New helpers:
    - bpf_find_vma(), find and inspect VMAs for profiling use cases
    - bpf_loop(), runtime-bounded loop helper trading some execution
      time for much faster (if at all converging) verification
    - bpf_strncmp(), improve performance, avoid compiler flakiness
    - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
      for tracing programs, all inlined by the verifier
 
  - Support BPF relocations (CO-RE) in the kernel loader.
 
  - Further the support for BTF_TYPE_TAG annotations.
 
  - Allow access to local storage in sleepable helpers.
 
  - Convert verifier argument types to a composable form with different
    attributes which can be shared across types (ro, maybe-null).
 
  - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
    creating new, extensible ones where missing and deprecating those
    to be removed.
 
 Protocols
 ---------
 
  - WiFi (mac80211/cfg80211):
    - notify user space about long "come back in N" AP responses,
      allow it to react to such temporary rejections
    - allow non-standard VHT MCS 10/11 rates
    - use coarse time in airtime fairness code to save CPU cycles
 
  - Bluetooth:
    - rework of HCI command execution serialization to use a common
      queue and work struct, and improve handling errors reported
      in the middle of a batch of commands
    - rework HCI event handling to use skb_pull_data, avoiding packet
      parsing pitfalls
    - support AOSP Bluetooth Quality Report
 
  - SMC:
    - support net namespaces, following the RDMA model
    - improve connection establishment latency by pre-clearing buffers
    - introduce TCP ULP for automatic redirection to SMC
 
  - Multi-Path TCP:
    - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
    - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
      IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
    - support cmsgs: TCP_INQ
    - improvements in the data scheduler (assigning data to subflows)
    - support fastclose option (quick shutdown of the full MPTCP
      connection, similar to TCP RST in regular TCP)
 
  - MCTP (Management Component Transport) over serial, as defined by
    DMTF spec DSP0253 - "MCTP Serial Transport Binding".
 
 Driver API
 ----------
 
  - Support timestamping on bond interfaces in active/passive mode.
 
  - Introduce generic phylink link mode validation for drivers which
    don't have any quirks and where MAC capability bits fully express
    what's supported. Allow PCS layer to participate in the validation.
    Convert a number of drivers.
 
  - Add support to set/get size of buffers on the Rx rings and size of
    the tx copybreak buffer via ethtool.
 
  - Support offloading TC actions as first-class citizens rather than
    only as attributes of filters, improve sharing and device resource
    utilization.
 
  - WiFi (mac80211/cfg80211):
    - support forwarding offload (ndo_fill_forward_path)
    - support for background radar detection hardware
    - SA Query Procedures offload on the AP side
 
 New hardware / drivers
 ----------------------
 
  - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
    real-time requirements for isochronous communication with protocols
    like OPC UA Pub/Sub.
 
  - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
    integrated into many older Qualcomm SoCs, e.g. MSM8916 or
    MSM8974 (qcom_bam_dmux).
 
  - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
    driver with support for bridging, VLANs and multicast forwarding
    (lan966x).
 
  - iwlmei driver for co-operating between Intel's WiFi driver and
    Intel's Active Management Technology (AMT) devices.
 
  - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
 
  - Bluetooth:
    - MediaTek MT7921 SDIO devices
    - Foxconn MT7922A
    - Realtek RTL8852AE
 
 Drivers
 -------
 
  - Significantly improve performance in the datapaths of:
    lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
 
  - Intel Ethernet NICs:
    - igb: support PTP/time PEROUT and EXTTS SDP functions on
      82580/i354/i350 adapters
    - ixgbevf: new PF -> VF mailbox API which avoids the risk of
      mailbox corruption with ESXi
    - iavf: support configuration of VLAN features of finer granularity,
      stacked tags and filtering
    - ice: PTP support for new E822 devices with sub-ns precision
    - ice: support firmware activation without reboot
 
  - Mellanox Ethernet NICs (mlx5):
    - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
    - support TC forwarding when tunnel encap and decap happen between
      two ports of the same NIC
    - dynamically size and allow disabling various features to save
      resources for running in embedded / SmartNIC scenarios
 
  - Broadcom Ethernet NICs (bnxt):
    - use page frag allocator to improve Rx performance
    - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
 
  - Other Ethernet NICs:
    - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
 
  - Microsoft cloud/virtual NIC (mana):
    - add XDP support (PASS, DROP, TX)
 
  - Mellanox Ethernet switches (mlxsw):
    - initial support for Spectrum-4 ASICs
    - VxLAN with IPv6 underlay
 
  - Marvell Ethernet switches (prestera):
    - support flower flow templates
    - add basic IP forwarding support
 
  - NXP embedded Ethernet switches (ocelot & felix):
    - support Per-Stream Filtering and Policing (PSFP)
    - enable cut-through forwarding between ports by default
    - support FDMA to improve packet Rx/Tx to CPU
 
  - Other embedded switches:
    - hellcreek: improve trapping management (STP and PTP) packets
    - qca8k: support link aggregation and port mirroring
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - qca6390, wcn6855: enable 802.11 power save mode in station mode
    - BSS color change support
    - WCN6855 hw2.1 support
    - 11d scan offload support
    - scan MAC address randomization support
    - full monitor mode, only supported on QCN9074
    - qca6390/wcn6855: report signal and tx bitrate
    - qca6390: rfkill support
    - qca6390/wcn6855: regdb.bin support
 
  - Intel WiFi (iwlwifi):
    - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
      in cooperation with the BIOS
    - support for Optimized Connectivity Experience (OCE) scan
    - support firmware API version 68
    - lots of preparatory work for the upcoming Bz device family
 
  - MediaTek WiFi (mt76):
    - Specific Absorption Rate (SAR) support
    - mt7921: 160 MHz channel support
 
  - RealTek WiFi (rtw88):
    - Specific Absorption Rate (SAR) support
    - scan offload
 
  - Other WiFi NICs
    - ath10k: support fetching (pre-)calibration data from nvmem
    - brcmfmac: configure keep-alive packet on suspend
    - wcn36xx: beacon filter support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmHbkZAACgkQMUZtbf5S
 IruYkQ//XX7BggcwBfukPK83j0dONolClijqKcKR08g4vB5L8GXvv6OErKIWrh4k
 h8JanCH352ZkbCSw3MvFdm825UYQv8vPMd6Qks/LJ4aSKqCuy4MIlAo+yOw4Km3O
 i7++lRfma6DqHHI59wvLjWoxZSPu8lL+rI8UsZ5qMOlnNlGAOXsNrzRjaqQ3FddY
 AMxZeBUtrPqUCCQZFq3U8apkYzUp7CA/3XR9zRcja3uPbrtOV2G+4whRF90qGNWz
 Tm/QvJ9F/Ab292cbhxR4KuaQ3hUhaCQyDjbZk3+FZzZpAVhYTVqcNjny6+yXmbiP
 NXRtwemnl1NlWKMnJM8lEeY48u626tRIkxA/Wtd61uoO5uKUSxfGP+UpUi+DfXbF
 yIw50VQ7L2bpxXP/HjtmhVgZDaWKYyh22Zw4Hp/muMJz0hgUB0KODY3tf2jUWbjJ
 0oEgocWyzhhwMQKqupTDCIaRgIs2ewYr4ZrFDhI3HnHC/vv1VjoPRUPIyxwppD2N
 cXvZb3B1sWK8iX5gCbISGzyU4bB7I0rvJSTU42ueti7n6NqRFZ79qHQpYnnY+JdO
 z1qOwY/d/yWfBoXVKRtRg2qz6CdEt5BQklwAgVEBgrFpf58gp694EwGMb1htY14J
 r/k9bVpmyIFpUnBH2CPMRfBVA3tUTqzyzzFV4AMw40NYLKmhLdo=
 =KLm3
 -----END PGP SIGNATURE-----

Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...
2022-01-10 19:06:09 -08:00
Jakub Kicinski
f7ea534a09 add includes masked by cgroup -> bpf dependency
cgroup pulls in BPF which pulls in a lot of includes.
We're about to break that chain so fix those who were
depending on it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211216025538.1649516-2-kuba@kernel.org
2021-12-16 14:57:09 -08:00
Alexander Gordeev
4c88bb96e4 s390/mm: check 2KB-fragment page on release
When CONFIG_DEBUG_VM is defined check that pending remove
and tracking nibbles (bits 31-24 of the page refcount) are
cleared. Should the earlier stages of the page lifespan
have a race or logical error, such check could help in
exposing the issue.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:08 +01:00
Alexander Gordeev
1194372db6 s390/mm: better annotate 2KB pagetable fragments handling
Explicitly encode immediate value of pending remove nibble
(bits 31-28) and tracking nibble (bits 27-24) of the page
refcount whenever these nibbles are tested or changed, for
better readability. Also, add some comments describing how
the fragments are handled.

Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:08 +01:00
Alexander Gordeev
c2c224932f s390/mm: fix 2KB pgtable release race
There is a race on concurrent 2KB-pgtables release paths when
both upper and lower halves of the containing parent page are
freed, one via page_table_free_rcu() + __tlb_remove_table(),
and the other via page_table_free(). The race might lead to a
corruption as result of remove of list item in page_table_free()
concurrently with __free_page() in __tlb_remove_table().

Let's assume first the lower and next the upper 2KB-pgtables are
freed from a page. Since both halves of the page are allocated
the tracking byte (bits 24-31 of the page _refcount) has value
of 0x03 initially:

CPU0				CPU1
----				----

page_table_free_rcu() // lower half
{
	// _refcount[31..24] == 0x03
	...
	atomic_xor_bits(&page->_refcount,
			0x11U << (0 + 24));
	// _refcount[31..24] <= 0x12
	...
	table = table | (1U << 0);
	tlb_remove_table(tlb, table);
}
...
__tlb_remove_table()
{
	// _refcount[31..24] == 0x12
	mask = _table & 3;
	// mask <= 0x01
	...

				page_table_free() // upper half
				{
					// _refcount[31..24] == 0x12
					...
					atomic_xor_bits(
						&page->_refcount,
						1U << (1 + 24));
					// _refcount[31..24] <= 0x10
					// mask <= 0x10
					...
	atomic_xor_bits(&page->_refcount,
			mask << (4 + 24));
	// _refcount[31..24] <= 0x00
	// mask <= 0x00
	...
	if (mask != 0) // == false
		break;
	fallthrough;
	...
					if (mask & 3) // == false
						...
					else
	__free_page(page);			list_del(&page->lru);
	^^^^^^^^^^^^^^^^^^	RACE!		^^^^^^^^^^^^^^^^^^^^^
}					...
				}

The problem is page_table_free() releases the page as result of
lower nibble unset and __tlb_remove_table() observing zero too
early. With this update page_table_free() will use the similar
logic as page_table_free_rcu() + __tlb_remove_table(), and mark
the fragment as pending for removal in the upper nibble until
after the list_del().

In other words, the parent page is considered as unreferenced and
safe to release only when the lower nibble is cleared already and
unsetting a bit in upper nibble results in that nibble turned zero.

Cc: stable@vger.kernel.org
Suggested-by: Vlastimil Babka <vbabka@suse.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:08 +01:00
Alexander Egorenkov
cb22cd2d8f s390/sclp: release SCLP early buffer after kernel initialization
The SCLP early buffer is used only during kernel initialization and can be
freed afterwards. The only way to ensure that it is not released while
being in use, is to release it in free_initmem().

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[agordeev@linux.ibm.com: added debug output]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-16 19:58:07 +01:00
Heiko Carstens
da001fce26 s390/pgalloc: use pointers instead of unsigned long values
After adding the missing __va()/__pa() calls to the base asce
functions there are even more casts in the code than before. Make the
code more readable by passing and using pointers to page tables,
instead of using unsigned values for the same purpose.

This allows to get rid of nearly all casts within the code.

Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10 16:14:26 +01:00
Heiko Carstens
2f882800f6 s390/pgalloc: add virt/phys address handling to base asce functions
The base asce functions create/free page tables open-coded to make
sure that the returned asce and page tables do not make use of any
enhanced DAT features like e.g. large pages. This is required for some
I/O functions that use an asce, like e.g. some service call requests.

Handling of virtual vs physical addresses is missing; therefore add
that now.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10 16:14:26 +01:00
Heiko Carstens
69700fb438 s390/cmm: add missing virt_to_phys() conversion
diag10_range() expects a pfn, however the current cmm code is shifting
a virtual address, instead of a physical address by PAGE_SHIFT bits,
which would give a wrong result in case if V!=R.

Use virt_to_pfn() to fix this.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10 16:14:25 +01:00
Heiko Carstens
d2f2949ab6 s390/mm: add missing phys_to_virt translation to page table dumper
The page table dumper walks page table tables without using standard
page table primitives in order to also dump broken entries. However it
currently does not translate physical to virtual addresses before
dereferencing them. Therefore add this missing translation.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-10 16:14:25 +01:00
Linus Torvalds
5147da902e Merge branch 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
 "While looking at some issues related to the exit path in the kernel I
  found several instances where the code is not using the existing
  abstractions properly.

  This set of changes introduces force_fatal_sig a way of sending a
  signal and not allowing it to be caught, and corrects the misuse of
  the existing abstractions that I found.

  A lot of the misuse of the existing abstractions are silly things such
  as doing something after calling a no return function, rolling BUG by
  hand, doing more work than necessary to terminate a kernel thread, or
  calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).

  In the review a deficiency in force_fatal_sig and force_sig_seccomp
  where ptrace or sigaction could prevent the delivery of the signal was
  found. I have added a change that adds SA_IMMUTABLE to change that
  makes it impossible to interrupt the delivery of those signals, and
  allows backporting to fix force_sig_seccomp

  And Arnd found an issue where a function passed to kthread_run had the
  wrong prototype, and after my cleanup was failing to build."

* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
  soc: ti: fix wkup_m3_rproc_boot_thread return type
  signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
  signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
  exit/r8188eu: Replace the macro thread_exit with a simple return 0
  exit/rtl8712: Replace the macro thread_exit with a simple return 0
  exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
  signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
  signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
  signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
  exit/syscall_user_dispatch: Send ordinary signals on failure
  signal: Implement force_fatal_sig
  exit/kthread: Have kernel threads return instead of calling do_exit
  signal/s390: Use force_sigsegv in default_trap_handler
  signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
  signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
  signal/sparc: In setup_tsb_params convert open coded BUG into BUG
  signal/powerpc: On swapcontext failure force SIGSEGV
  signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
  signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
  signal/sparc32: Remove unreachable do_exit in do_sparc_fault
  ...
2021-11-10 16:15:54 -08:00
Linus Torvalds
0b707e572a s390 updates for the 5.16 merge window
- Add support for ftrace with direct call and ftrace direct call samples.
 
 - Add support for kernel command lines longer than current 896 bytes and
   make its length configurable.
 
 - Add support for BEAR enhancement facility to improve last breaking
   event instruction tracking.
 
 - Add kprobes sanity checks and testcases to prevent kprobe in the mid
   of an instruction.
 
 - Allow concurrent access to /dev/hwc for the CPUMF users.
 
 - Various ftrace / jump label improvements.
 
 - Convert unwinder tests to KUnit.
 
 - Add s390_iommu_aperture kernel parameter to tweak the limits on
   concurrently usable DMA mappings.
 
 - Add ap.useirq AP module option which can be used to disable interrupt
   use.
 
 - Add add_disk() error handling support to block device drivers.
 
 - Drop arch specific and use generic implementation of strlcpy and strrchr.
 
 - Several __pa/__va usages fixes.
 
 - Various cio, crypto, pci, kernel doc and other small fixes and
   improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX
 FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F
 DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq
 wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U
 IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR
 3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE
 QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ==
 =k0Ab
 -----END PGP SIGNATURE-----

Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for ftrace with direct call and ftrace direct call
   samples.

 - Add support for kernel command lines longer than current 896 bytes
   and make its length configurable.

 - Add support for BEAR enhancement facility to improve last breaking
   event instruction tracking.

 - Add kprobes sanity checks and testcases to prevent kprobe in the mid
   of an instruction.

 - Allow concurrent access to /dev/hwc for the CPUMF users.

 - Various ftrace / jump label improvements.

 - Convert unwinder tests to KUnit.

 - Add s390_iommu_aperture kernel parameter to tweak the limits on
   concurrently usable DMA mappings.

 - Add ap.useirq AP module option which can be used to disable interrupt
   use.

 - Add add_disk() error handling support to block device drivers.

 - Drop arch specific and use generic implementation of strlcpy and
   strrchr.

 - Several __pa/__va usages fixes.

 - Various cio, crypto, pci, kernel doc and other small fixes and
   improvements all over the code.

[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]

* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
  s390: make command line configurable
  s390: support command lines longer than 896 bytes
  s390/kexec_file: move kernel image size check
  s390/pci: add s390_iommu_aperture kernel parameter
  s390/spinlock: remove incorrect kernel doc indicator
  s390/string: use generic strlcpy
  s390/string: use generic strrchr
  s390/ap: function rework based on compiler warning
  s390/cio: make ccw_device_dma_* more robust
  s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
  s390/hmcdrv: fix kernel doc comments
  s390/ap: new module option ap.useirq
  s390/cpumf: Allow multiple processes to access /dev/hwc
  s390/bitops: return true/false (not 1/0) from bool functions
  s390: add support for BEAR enhancement facility
  s390: introduce nospec_uses_trampoline()
  s390: rename last_break to pgm_last_break
  s390/ptrace: add last_break member to pt_regs
  s390/sclp: sort out physical vs virtual pointers usage
  s390/setup: convert start and end initrd pointers to virtual
  ...
2021-11-06 14:48:06 -07:00
Linus Torvalds
512b7931ad Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
 "257 patches.

  Subsystems affected by this patch series: scripts, ocfs2, vfs, and
  mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
  gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
  pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
  memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
  vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
  cleanups, kfence, and damon)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
  mm/damon: remove return value from before_terminate callback
  mm/damon: fix a few spelling mistakes in comments and a pr_debug message
  mm/damon: simplify stop mechanism
  Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
  Docs/admin-guide/mm/damon/start: simplify the content
  Docs/admin-guide/mm/damon/start: fix a wrong link
  Docs/admin-guide/mm/damon/start: fix wrong example commands
  mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
  mm/damon: remove unnecessary variable initialization
  Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
  mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
  selftests/damon: support watermarks
  mm/damon/dbgfs: support watermarks
  mm/damon/schemes: activate schemes based on a watermarks mechanism
  tools/selftests/damon: update for regions prioritization of schemes
  mm/damon/dbgfs: support prioritization weights
  mm/damon/vaddr,paddr: support pageout prioritization
  mm/damon/schemes: prioritize regions within the quotas
  mm/damon/selftests: support schemes quotas
  mm/damon/dbgfs: support quotas of schemes
  ...
2021-11-06 14:08:17 -07:00
Mike Rapoport
3ecc68349b memblock: rename memblock_free to memblock_phys_free
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:41 -07:00
Christophe Leroy
564f6ea1a6 s390: use generic version of arch_is_kernel_initmem_freed()
The generic version of arch_is_kernel_initmem_freed() now does the same
as s390 version.

Remove the s390 version.

Link: https://lkml.kernel.org/r/b6feb5dfe611a322de482762fc2df3a9eece70c7.1633001016.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:38 -07:00
Claudio Imbrenda
380d97bd02 KVM: s390: pv: properly handle page flags for protected guests
Introduce variants of the convert and destroy page functions that also
clear the PG_arch_1 bit used to mark them as secure pages.

The PG_arch_1 flag is always allowed to overindicate; using the new
functions introduced here allows to reduce the extent of overindication
and thus improve performance.

These new functions can only be called on pages for which a reference
is already being held.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210920132502.36111-7-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-27 07:55:53 +02:00
Sven Schnelle
3b051e89da s390: add support for BEAR enhancement facility
The Breaking-Event-Address-Register (BEAR) stores the address of the
last breaking event instruction. Breaking events are usually instructions
that change the program flow - for example branches, and instructions
that modify the address in the PSW like lpswe. This is useful for debugging
wild branches, because one could easily figure out where the wild branch
was originating from.

What is problematic is that lpswe is considered a breaking event, and
therefore overwrites BEAR on kernel exit. The BEAR enhancement facility
adds new instructions that allow to save/restore BEAR and also an lpswey
instruction that doesn't cause a breaking event. So we can save BEAR on
kernel entry and restore it on exit to user space.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26 15:21:29 +02:00
Alexander Gordeev
273cd173a1 s390/pgtable: use physical address for Page-Table Origin
Instructions IPTE, IDTE and CRDTE accept Page-Table Origin
as one of the arguments, but instead the pgtable virtual
address is passed. Fix that and also update the crdte()
prototype to conform to csp() and cspg() friends.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26 15:21:27 +02:00
David Hildenbrand
14ea40e22c s390/mm: optimize reset_guest_reference_bit()
We already optimize get_guest_storage_key() to assume that if we don't have
a PTE table and don't have a huge page mapped that the storage key is 0.

Similarly, optimize reset_guest_reference_bit() to simply do nothing if
there is no PTE table and no huge page mapped.

Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-10-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-25 09:20:38 +02:00
David Hildenbrand
7cb70266b0 s390/mm: optimize set_guest_storage_key()
We already optimize get_guest_storage_key() to assume that if we don't have
a PTE table and don't have a huge page mapped that the storage key is 0.

Similarly, optimize set_guest_storage_key() to simply do nothing in case
the key to set is 0.

Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-9-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-25 09:20:38 +02:00
David Hildenbrand
8318c404cf s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
pte_map_lock() is sufficient.

Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-8-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-25 09:20:38 +02:00