Pull fsnotify updates from Jan Kara:
- fixes of use-after-tree issues when handling fanotify permission
events from Miklos
- refcount_t conversions from Elena
- fixes of ENOMEM handling in dnotify and fsnotify from me
* 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: convert fsnotify_mark.refcnt from atomic_t to refcount_t
fanotify: clean up CONFIG_FANOTIFY_ACCESS_PERMISSIONS ifdefs
fsnotify: clean up fsnotify()
fanotify: fix fsnotify_prepare_user_wait() failure
fsnotify: fix pinning group in fsnotify_prepare_user_wait()
fsnotify: pin both inode and vfsmount mark
fsnotify: clean up fsnotify_prepare/finish_user_wait()
fsnotify: convert fsnotify_group.refcnt from atomic_t to refcount_t
fsnotify: Protect bail out path of fsnotify_add_mark_locked() properly
dnotify: Handle errors from fsnotify_add_mark_locked() in fcntl_dirnotify()
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume
and clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler
on ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core
and drop legacy bus type suspend and resume callbacks from
ARM/locomo (Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up
somewhat (Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle)
residency counter based on the LPIT ACPI table on Intel
platforms (Srinivas Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the
notifier removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use
stale cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing
wakeup events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent
the PM core from using the direct-complete optimization with
it as that is guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit
(Gaurav Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it
up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in
the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches,
Rafael Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava,
Shuah Khan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QTnx
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are no real big ticket items here this time.
The most noticeable change is probably the relocation of the OPP
(Operating Performance Points) framework to its own directory under
drivers/ as it has grown big enough for that. Also Viresh is now going
to maintain it and send pull requests for it to me, so you will see
this change in the git history going forward (but still not right
now).
Another noticeable set of changes is the modifications of the PM core,
the PCI subsystem and the ACPI PM domain to allow of more integration
between system-wide suspend/resume and runtime PM. For now it's just a
way to avoid resuming devices from runtime suspend unnecessarily
during system suspend (if the driver sets a flag to indicate its
readiness for that) and in the works is an analogous mechanism to
allow devices to stay suspended after system resume.
In addition to that, we have some changes related to supporting
frequency-invariant CPU utilization metrics in the scheduler and in
the schedutil cpufreq governor on ARM and changes to add support for
device performance states to the generic power domains (genpd)
framework.
The rest is mostly fixes and cleanups of various sorts.
Specifics:
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume and
clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler on
ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core and
drop legacy bus type suspend and resume callbacks from ARM/locomo
(Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up somewhat
(Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
counter based on the LPIT ACPI table on Intel platforms (Srinivas
Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the notifier
removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use stale
cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing wakeup
events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent the PM
core from using the direct-complete optimization with it as that is
guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it up
(Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in the
cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava, Shuah
Khan)"
* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
intel_idle: Graceful probe failure when MWAIT is disabled
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpuidle: Avoid assignment in if () argument
cpuidle: Clean up cpuidle_enable_device() error handling a bit
ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
cpuidle: ladder: Add per CPU PM QoS resume latency support
PM / QoS: Fix device resume latency framework
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
...
Pull x86 APIC updates from Thomas Gleixner:
"This update provides a major overhaul of the APIC initialization and
vector allocation code:
- Unification of the APIC and interrupt mode setup which was
scattered all over the place and was hard to follow. This also
distangles the timer setup from the APIC initialization which
brings a clear separation of functionality.
Great detective work from Dou Lyiang!
- Refactoring of the x86 vector allocation mechanism. The existing
code was based on nested loops and rather convoluted APIC callbacks
which had a horrible worst case behaviour and tried to serve all
different use cases in one go. This led to quite odd hacks when
supporting the new managed interupt facility for multiqueue devices
and made it more or less impossible to deal with the vector space
exhaustion which was a major roadblock for server hibernation.
Aside of that the code dealing with cpu hotplug and the system
vectors was disconnected from the actual vector management and
allocation code, which made it hard to follow and maintain.
Utilizing the new bitmap matrix allocator core mechanism, the new
allocator and management code consolidates the handling of system
vectors, legacy vectors, cpu hotplug mechanisms and the actual
allocation which needs to be aware of system and legacy vectors and
hotplug constraints into a single consistent entity.
This has one visible change: The support for multi CPU targets of
interrupts, which is only available on a certain subset of
CPUs/APIC variants has been removed in favour of single interrupt
targets. A proper analysis of the multi CPU target feature revealed
that there is no real advantage as the vast majority of interrupts
end up on the CPU with the lowest APIC id in the set of target CPUs
anyway. That change was agreed on by the relevant folks and allowed
to simplify the implementation significantly and to replace rather
fragile constructs like the vector cleanup IPI with straight
forward and solid code.
Furthermore this allowed to cleanly separate the allocation details
for legacy, normal and managed interrupts:
* Legacy interrupts are not longer wasting 16 vectors
unconditionally
* Managed interrupts have now a guaranteed vector reservation, but
the actual vector assignment happens when the interrupt is
requested. It's guaranteed not to fail.
* Normal interrupts no longer allocate vectors unconditionally
when the interrupt is set up (IO/APIC init or MSI(X) enable).
The mechanism has been switched to a best effort reservation
mode. The actual allocation happens when the interrupt is
requested. Contrary to managed interrupts the request can fail
due to vector space exhaustion, but drivers must handle a fail
of request_irq() anyway. When the interrupt is freed, the vector
is handed back as well.
This solves a long standing problem with large unconditional
vector allocations for a certain class of enterprise devices
which prevented server hibernation due to vector space
exhaustion when the unused allocated vectors had to be migrated
to CPU0 while unplugging all non boot CPUs.
The code has been equipped with trace points and detailed debugfs
information to aid analysis of the vector space"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE
PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code
genirq: Add config option for reservation mode
x86/vector: Use correct per cpu variable in free_moved_vector()
x86/apic/vector: Ignore set_affinity call for inactive interrupts
x86/apic: Fix spelling mistake: "symmectic" -> "symmetric"
x86/apic: Use dead_cpu instead of current CPU when cleaning up
ACPI/init: Invoke early ACPI initialization earlier
x86/vector: Respect affinity mask in irq descriptor
x86/irq: Simplify hotplug vector accounting
x86/vector: Switch IOAPIC to global reservation mode
x86/vector/msi: Switch to global reservation mode
x86/vector: Handle managed interrupts proper
x86/io_apic: Reevaluate vector configuration on activate()
iommu/amd: Reevaluate vector configuration on activate()
iommu/vt-d: Reevaluate vector configuration on activate()
x86/apic/msi: Force reactivation of interrupts at startup time
x86/vector: Untangle internal state from irq_cfg
x86/vector: Compile SMP only code conditionally
x86/apic: Remove unused callbacks
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
Pull x86 core updates from Ingo Molnar:
"Note that in this cycle most of the x86 topics interacted at a level
that caused them to be merged into tip:x86/asm - but this should be a
temporary phenomenon, hopefully we'll back to the usual patterns in
the next merge window.
The main changes in this cycle were:
Hardware enablement:
- Add support for the Intel UMIP (User Mode Instruction Prevention)
CPU feature. This is a security feature that disables certain
instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)
[ Note that this is disabled by default for now, there are some
smaller enhancements in the pipeline that I'll follow up with in
the next 1-2 days, which allows this to be enabled by default.]
- Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
feature, on top of SME (Secure Memory Encryption) support that was
added in v4.14. (Tom Lendacky, Brijesh Singh)
- Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)
Other changes:
- A big series of entry code simplifications and enhancements (Andy
Lutomirski)
- Make the ORC unwinder default on x86 and various objtool
enhancements. (Josh Poimboeuf)
- 5-level paging enhancements (Kirill A. Shutemov)
- Micro-optimize the entry code a bit (Borislav Petkov)
- Improve the handling of interdependent CPU features in the early
FPU init code (Andi Kleen)
- Build system enhancements (Changbin Du, Masahiro Yamada)
- ... plus misc enhancements, fixes and cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
x86/build: Make the boot image generation less verbose
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
x86/traps: Fix up general protection faults caused by UMIP
x86/umip: Enable User-Mode Instruction Prevention at runtime
x86/umip: Force a page fault when unable to copy emulated result to user
x86/umip: Add emulation code for UMIP instructions
x86/cpufeature: Add User-Mode Instruction Prevention definitions
x86/insn-eval: Add support to resolve 16-bit address encodings
x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
x86/insn-eval: Add support to resolve 32-bit address encodings
x86/insn-eval: Compute linear address in several utility functions
resource: Fix resource_size.cocci warnings
X86/KVM: Clear encryption attribute when SEV is active
X86/KVM: Decrypt shared per-cpu variables when SEV is active
percpu: Introduce DEFINE_PER_CPU_DECRYPTED
x86: Add support for changing memory encryption attribute in early boot
x86/io: Unroll string I/O when SEV is active
x86/boot: Add early boot support when running with SEV active
...
Pull scheduler updates from Ingo Molnar:
"The main updates in this cycle were:
- Group balancing enhancements and cleanups (Brendan Jackman)
- Move CPU isolation related functionality into its separate
kernel/sched/isolation.c file, with related 'housekeeping_*()'
namespace and nomenclature et al. (Frederic Weisbecker)
- Improve the interactive/cpu-intense fairness calculation (Josef
Bacik)
- Improve the PELT code and related cleanups (Peter Zijlstra)
- Improve the logic of pick_next_task_fair() (Uladzislau Rezki)
- Improve the RT IPI based balancing logic (Steven Rostedt)
- Various micro-optimizations:
- better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi)
- better idle loop (Cheng Jian)
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
sched/sysctl: Fix attributes of some extern declarations
sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated
sched/isolation: Add basic isolcpus flags
sched/isolation: Move isolcpus= handling to the housekeeping code
sched/isolation: Handle the nohz_full= parameter
sched/isolation: Introduce housekeeping flags
sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL
sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu()
sched/isolation: Use its own static key
sched/isolation: Make the housekeeping cpumask private
sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu()
sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version
sched/isolation: Move housekeeping related code to its own file
sched/idle: Micro-optimize the idle loop
sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK
x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter
sched/rt: Simplify the IPI based RT balancing logic
block/ioprio: Use a helper to check for RT prio
sched/rt: Add a helper to test for a RT task
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel:
- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)
- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)
- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)
Tooling:
- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)
- 'perf trace' updates (Arnaldo Carvalho de Melo)
- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)
- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)
- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)
- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)
- perf sched timehist enhancements (David Ahern)
- ... various other enhancements, updates, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are:
- Documentation updates
- RCU CPU stall-warning updates
- Torture-test updates
- Miscellaneous fixes
Size wise the biggest updates are to documentation. Excluding
documentation most of the code increase comes from a single commit
which expands debugging"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
srcu: Add parameters to SRCU docbook comments
doc: Rewrite confusing statement about memory barriers
memory-barriers.txt: Fix typo in pairing example
rcu/segcblist: Include rcupdate.h
rcu: Add extended-quiescent-state testing advice
rcu: Suppress lockdep false-positive ->boost_mtx complaints
rcu: Do not include rtmutex_common.h unconditionally
torture: Provide TMPDIR environment variable to specify tmpdir
rcutorture: Dump writer stack if stalled
rcutorture: Add interrupt-disable capability to stall-warning tests
rcu: Suppress RCU CPU stall warnings while dumping trace
rcu: Turn off tracing before dumping trace
rcu: Make RCU CPU stall warnings check for irq-disabled CPUs
sched,rcu: Make cond_resched() provide RCU quiescent state
sched: Make resched_cpu() unconditional
irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP
rcu: Create call_rcu_tasks() kthread at boot time
rcu: Fix up pending cbs check in rcu_prepare_for_idle
memory-barriers: Rework multicopy-atomicity section
memory-barriers: Replace uses of "transitive"
...
Pull security subsystem integrity updates from James Morris:
"There is a mixture of bug fixes, code cleanup, preparatory code for
new functionality and new functionality.
Commit 26ddabfe96 ("evm: enable EVM when X509 certificate is
loaded") enabled EVM without loading a symmetric key, but was limited
to defining the x509 certificate pathname at build. Included in this
set of patches is the ability of enabling EVM, without loading the EVM
symmetric key, from userspace. New is the ability to prevent the
loading of an EVM symmetric key."
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Remove redundant conditional operator
ima: Fix bool initialization/comparison
ima: check signature enforcement against cmdline param instead of CONFIG
module: export module signature enforcement status
ima: fix hash algorithm initialization
EVM: Only complain about a missing HMAC key once
EVM: Allow userspace to signal an RSA key has been loaded
EVM: Include security.apparmor in EVM measurements
ima: call ima_file_free() prior to calling fasync
integrity: use kernel_read_file_from_path() to read x509 certs
ima: always measure and audit files in policy
ima: don't remove the securityfs policy file
vfs: fix mounting a filesystem with i_version
The (alleged) users of the module addresses are the same: kernel
profiling.
So just expose the same helper and format macros, and unify the logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code goes back to the historical bitkeeper tree commit 3f7b0672086
("Module section offsets in /sys/module"), where Jonathan Corbet wanted
to show people how to debug loadable modules.
See
https://lwn.net/Articles/88052/
from June 2004.
To expose the required load address information, Jonathan added the
sections subdirectory for every module in /sys/modules, and made them
S_IRUGO - readable by everybody.
It was a more innocent time, plus those S_IRxxx macro names are a lot
more confusing than the octal numbers are, so maybe it wasn't even
intentional. But here we are, thirteen years later, and I'll just change
it to S_IRUSR instead.
Let's see if anybody even notices.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-sleep:
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
PM / sleep: Remove pm_complete_with_resume_check()
PM: ARM: locomo: Drop suspend and resume bus type callbacks
PM: Use a more common logging style
PM: Document rules on using pm_runtime_resume() in system suspend callbacks
* pm-cpufreq-sched:
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
* pm-opp:
PM / OPP: Add dev_pm_opp_{un}register_get_pstate_helper()
PM / OPP: Support updating performance state of device's power domain
PM / OPP: add missing of_node_put() for of_get_cpu_node()
PM / OPP: Rename dev_pm_opp_register_put_opp_helper()
PM / OPP: Add missing of_node_put(np)
PM / OPP: Move error message to debug level
PM / OPP: Use snprintf() to avoid kasprintf() and kfree()
PM / OPP: Move the OPP directory out of power/
Merge /proc/kallsyms pointer value restrictions.
Instead of using %pK, and making it about root access (at the wrong
time, no less), make the whole choice of whether to show the actual
pointer value be very explicit to the kallsyms code.
In particular, we can now default to not doing so, and yet avoid
annoying kernel profiling by actually looking at whether kernel
profiling is allowed or not (by default it is not).
This is all mostly preparation for the real "let's stop leaking kernel
addresses" work that Tobin Harding is working on.
Small steps.
* kallsyms-restrictions:
stop using '%pK' for /proc/kallsyms pointer values
If ffz() ever returns a value >= 31 then the following shift is undefined
behaviour because the literal 1 which gets shifted is treated as signed
integer.
In practice, the bug is probably harmless, since the first undefined shift
count is 31 which results - ignoring UB - in (int)(0x80000000). This gets
sign extended so bit 32-63 will be set as well and all subsequent
__setup_irq() calls would just end up hitting the -EBUSY branch.
However, a sufficiently aggressive optimizer may use the UB of 1<<31
to decide that doesn't happen, and hence elide the sign-extension
code, so that subsequent calls can indeed get ffz > 31.
In any case, the right thing to do is to make the literal 1UL.
[ tglx: For this to happen a single interrupt would have to be shared by 32
devices. Hardware like that does not exist and would have way more
problems than that. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
data has been already derefenced unconditionally, so it's pointless to do a
NULL pointer check on it afterwards. Drop it.
[ tglx: Depersonify changelog. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20171112212904.28574-1-linux@rasmusvillemoes.dk
write_irq_affinity() returns the number of written bytes, which means
success, unconditionally whether the actual irq_set_affinity() call
succeeded or not.
Add proper error handling and pass the error code returned from
irq_set_affinity() back to user space in case of failure.
[ tglx: Fixed coding style and massaged changelog ]
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: zhong.weidong@zte.com.cn
Link: https://lkml.kernel.org/r/1510106103-184761-1-git-send-email-wen.yang99@zte.com.cn
Add a function, similar to mod_timer(), that will start a timer if it isn't
running and will modify it if it is running and has an expiry time longer
than the new time. If the timer is running with an expiry time that's the
same or sooner, no change is made.
The function looks like:
int timer_reduce(struct timer_list *timer, unsigned long expires);
This can be used by code such as networking code to make it easier to share
a timer for multiple timeouts. For instance, in upcoming AF_RXRPC code,
the rxrpc_call struct will maintain a number of timeouts:
unsigned long ack_at;
unsigned long resend_at;
unsigned long ping_at;
unsigned long expect_rx_by;
unsigned long expect_req_by;
unsigned long expect_term_by;
each of which is set independently of the others. With timer reduction
available, when the code needs to set one of the timeouts, it only needs to
look at that timeout and then call timer_reduce() to modify the timer,
starting it or bringing it forward if necessary. There is no need to refer
to the other timeouts to see which is earliest and no need to take any lock
other than, potentially, the timer lock inside timer_reduce().
Note, that this does not protect against concurrent invocations of any of
the timer functions.
As an example, the expect_rx_by timeout above, which terminates a call if
we don't get a packet from the server within a certain time window, would
be set something like this:
unsigned long now = jiffies;
unsigned long expect_rx_by = now + packet_receive_timeout;
WRITE_ONCE(call->expect_rx_by, expect_rx_by);
timer_reduce(&call->timer, expect_rx_by);
The timer service code (which might, say, be in a work function) would then
check all the timeouts to see which, if any, had triggered, deal with
those:
t = READ_ONCE(call->ack_at);
if (time_after_eq(now, t)) {
cmpxchg(&call->ack_at, t, now + MAX_JIFFY_OFFSET);
set_bit(RXRPC_CALL_EV_ACK, &call->events);
}
and then restart the timer if necessary by finding the soonest timeout that
hasn't yet passed and then calling timer_reduce().
The disadvantage of doing things this way rather than comparing the timers
each time and calling mod_timer() is that you *will* take timer events
unless you can finish what you're doing and delete the timer in time.
The advantage of doing things this way is that you don't need to use a lock
to work out when the next timer should be set, other than the timer's own
lock - which you might not have to take.
[ tglx: Fixed weird formatting and adopted it to pending changes ]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: keyrings@vger.kernel.org
Cc: linux-afs@lists.infradead.org
Link: https://lkml.kernel.org/r/151023090769.23050.1801643667223880753.stgit@warthog.procyon.org.uk
__getnstimeofday() is a rather odd interface, with a number of quirks:
- The caller may come from NMI context, but the implementation is not NMI safe,
one way to get there from NMI is
NMI handler:
something bad
panic()
kmsg_dump()
pstore_dump()
pstore_record_init()
__getnstimeofday()
- The calling conventions are different from any other timekeeping functions,
to deal with returning an error code during suspended timekeeping.
Address the above issues by using a completely different method to get the
time: ktime_get_real_fast_ns() is NMI safe and has a reasonable behavior
when timekeeping is suspended: it returns the time at which it got
suspended. As Thomas Gleixner explained, this is safe, as
ktime_get_real_fast_ns() does not call into the clocksource driver that
might be suspended.
The result can easily be transformed into a timespec structure. Since
ktime_get_real_fast_ns() was not exported to modules, add the export.
The pstore behavior for the suspended case changes slightly, as it now
stores the timestamp at which timekeeping was suspended instead of storing
a zero timestamp.
This change is not addressing y2038-safety, that's subject to a more
complex follow up patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Colin Cross <ccross@android.com>
Link: https://lkml.kernel.org/r/20171110152530.1926955-1-arnd@arndb.de
The llist_for_each_entry() loop in irq_work_run_list() is unsafe because
once the works PENDING bit is cleared it can be requeued on another CPU.
Use llist_for_each_entry_safe() instead.
Fixes: 16c0890dc6 ("irq/work: Don't reinvent the wheel but use existing llist API")
Reported-by:Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Link: http://lkml.kernel.org/r/151027307351.14762.4611888896020658384@mail.alporthouse.com
- Prevent the schedutil cpufreq governor from using the
utilization of a wrong CPU in some cases which started to
happen after one of the recent changes in it (Chris Redpath).
- Blacklist Dell XPS13 9360 from using the Low Power S0 Idle _DSM
interface as that causes serious issue (related to NVMe) to
appear on one of these machines, even though the other Dells
XPS13 9360 in somewhat different HW configurations behave
correctly (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=F9fg
-----END PGP SIGNATURE-----
Merge tag 'pm-final-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull final power management fixes from Rafael Wysocki:
"These fix a regression in the schedutil cpufreq governor introduced by
a recent change and blacklist Dell XPS13 9360 from using the Low Power
S0 Idle _DSM interface which triggers serious problems on one of these
machines.
Specifics:
- Prevent the schedutil cpufreq governor from using the utilization
of a wrong CPU in some cases which started to happen after one of
the recent changes in it (Chris Redpath).
- Blacklist Dell XPS13 9360 from using the Low Power S0 Idle _DSM
interface as that causes serious issue (related to NVMe) to appear
on one of these machines, even though the other Dells XPS13 9360 in
somewhat different HW configurations behave correctly (Rafael
Wysocki)"
* tag 'pm-final-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360
cpufreq: schedutil: Examine the correct CPU when we update util
When the kernel is compiled with !CONFIG_SCHED_DEBUG support, we expect that
all SCHED_FEAT are turned into compile time constants being propagated
to support compiler optimizations.
Specifically, we expect that code blocks like this:
if (sched_feat(FEATURE_NAME) [&& <other_conditions>]) {
/* FEATURE CODE */
}
are turned into dead-code in case FEATURE_NAME defaults to FALSE, and thus
being removed by the compiler from the finale image.
For this mechanism to properly work it's required for the compiler to
have full access, from each translation unit, to whatever is the value
defined by the sched_feat macro. This macro is defined as:
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
and thus, the compiler can optimize that code only if the value of
sysctl_sched_features is visible within each translation unit.
Since:
029632fbb ("sched: Make separate sched*.c translation units")
the scheduler code has been split into separate translation units
however the definition of sysctl_sched_features is part of
kernel/sched/core.c while, for all the other scheduler modules, it is
visible only via kernel/sched/sched.h as an:
extern const_debug unsigned int sysctl_sched_features
Unfortunately, an extern reference does not allow the compiler to apply
constants propagation. Thus, on !CONFIG_SCHED_DEBUG kernel we still end up
with code to load a memory reference and (eventually) doing an unconditional
jump of a chunk of code.
This mechanism is unavoidable when sched_features can be turned on and off at
run-time. However, this is not the case for "production" kernels compiled with
!CONFIG_SCHED_DEBUG. In this case, sysctl_sched_features is just a constant value
which cannot be changed at run-time and thus memory loads and jumps can be
avoided altogether.
This patch fixes the case of !CONFIG_SCHED_DEBUG kernel by declaring a local version
of the sysctl_sched_features constant for each translation unit. This will
ultimately allow the compiler to perform constants propagation and dead-code
pruning.
Tests have been done, with !CONFIG_SCHED_DEBUG on a v4.14-rc8 with and without
the patch, by running 30 iterations of:
perf bench sched messaging --pipe --thread --group 4 --loop 50000
on a 40 cores Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz using the
powersave governor to rule out variations due to frequency scaling.
Statistics on the reported completion time:
count mean std min 99% max
v4.14-rc8 30.0 15.7831 0.176032 15.442 16.01226 16.014
v4.14-rc8+patch 30.0 15.5033 0.189681 15.232 15.93938 15.962
... show a 1.8% speedup on average completion time and 0.5% speedup in the
99 percentile.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20171108184101.16006-1-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'cached_raw_freq' is used to get the next frequency quickly but should
always be in sync with sg_policy->next_freq. There is a case where it is
not and in such cases it should be reset to avoid switching to incorrect
frequencies.
Consider this case for example:
- policy->cur is 1.2 GHz (Max)
- New request comes for 780 MHz and we store that in cached_raw_freq.
- Based on 780 MHz, we calculate the effective frequency as 800 MHz.
- We then see the CPU wasn't idle recently and choose to keep the next
freq as 1.2 GHz.
- Now we have cached_raw_freq is 780 MHz and sg_policy->next_freq is
1.2 GHz.
- Now if the utilization doesn't change in then next request, then the
next target frequency will still be 780 MHz and it will match with
cached_raw_freq. But we will choose 1.2 GHz instead of 800 MHz here.
Fixes: b7eaf1aab9 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Problem: This flag does not get cleared currently in the suspend or
resume path in the following cases:
* In case some driver's suspend routine returns an error.
* Successful s2idle case
* etc?
Why is this a problem: What happens is that the next suspend attempt
could fail even though the user did not enable the flag by writing to
/sys/power/wakeup_count. This is 1 use case how the issue can be seen
(but similar use case with driver suspend failure can be thought of):
1. Read /sys/power/wakeup_count
2. echo count > /sys/power/wakeup_count
3. echo freeze > /sys/power/wakeup_count
4. Let the system suspend, and wakeup the system using some wake source
that calls pm_wakeup_event() e.g. power button or something.
5. Note that the combined wakeup count would be incremented due
to the pm_wakeup_event() in the resume path.
6. After resuming the events_check_enabled flag is still set.
At this point if the user attempts to freeze again (without writing to
/sys/power/wakeup_count), the suspend would fail even though there has
been no wake event since the past resume.
Address that by clearing the flag just before a resume is completed,
so that it is always cleared for the corner cases mentioned above.
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not only is it annoying to have one single flag for all pointers, as if
that was a global choice and all kernel pointers are the same, but %pK
can't get the 'access' vs 'open' time check right anyway.
So make the /proc/kallsyms pointer value code use logic specific to that
particular file. We do continue to honor kptr_restrict, but the default
(which is unrestricted) is changed to instead take expected users into
account, and restrict access by default.
Right now the only actual expected user is kernel profiling, which has a
separate sysctl flag for kernel profile access. There may be others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A static variable sig_enforce is used as status var to indicate the real
value of CONFIG_MODULE_SIG_FORCE, once this one is set the var will hold
true, but if the CONFIG is not set the status var will hold whatever
value is present in the module.sig_enforce kernel cmdline param: true
when =1 and false when =0 or not present.
Considering this cmdline param take place over the CONFIG value when
it's not set, other places in the kernel could misbehave since they
would have only the CONFIG_MODULE_SIG_FORCE value to rely on. Exporting
this status var allows the kernel to rely in the effective value of
module signature enforcement, being it from CONFIG value or cmdline
param.
Signed-off-by: Bruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Lockdep now has an integrated IRQs disabled/enabled sanity check. Just
use it instead of the ad-hoc RCU version.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-15-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-13-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-12-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-10-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-9-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-7-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-6-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1509980490-4285-4-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, all the lock waiters entering the slowpath will do one
lock stealing attempt to acquire the lock. That helps performance,
especially in VMs with over-committed vCPUs. However, the current
pvqspinlocks still don't perform as good as unfair locks in many cases.
On the other hands, unfair locks do have the problem of lock starvation
that pvqspinlocks don't have.
This patch combines the best attributes of an unfair lock and a
pvqspinlock into a hybrid lock with 2 modes - queued mode & unfair
mode. A lock waiter goes into the unfair mode when there are waiters
in the wait queue but the pending bit isn't set. Otherwise, it will
go into the queued mode waiting in the queue for its turn.
On a 2-socket 36-core E5-2699 v3 system (HT off), a kernel build
(make -j<n>) was done in a VM with unpinned vCPUs 3 times with the
best time selected and <n> is the number of vCPUs available. The build
times of the original pvqspinlock, hybrid pvqspinlock and unfair lock
with various number of vCPUs are as follows:
vCPUs pvqlock hybrid pvqlock unfair lock
----- ------- -------------- -----------
30 342.1s 329.1s 329.1s
36 314.1s 305.3s 307.3s
45 345.0s 302.1s 306.6s
54 365.4s 308.6s 307.8s
72 358.9s 293.6s 303.9s
108 343.0s 285.9s 304.2s
The hybrid pvqspinlock performs better or comparable to the unfair
lock.
By turning on QUEUED_LOCK_STAT, the table below showed the number
of lock acquisitions in unfair mode and queue mode after a kernel
build with various number of vCPUs.
vCPUs queued mode unfair mode
----- ----------- -----------
30 9,130,518 294,954
36 10,856,614 386,809
45 8,467,264 11,475,373
54 6,409,987 19,670,855
72 4,782,063 25,712,180
It can be seen that as the VM became more and more over-committed,
the ratio of locks acquired in unfair mode increases. This is all
done automatically to get the best overall performance as possible.
Using a kernel locking microbenchmark with number of locking
threads equals to the number of vCPUs available on the same machine,
the minimum, average and maximum (min/avg/max) numbers of locking
operations done per thread in a 5-second testing interval are shown
below:
vCPUs hybrid pvqlock unfair lock
----- -------------- -----------
36 822,135/881,063/950,363 75,570/313,496/ 690,465
54 542,435/581,664/625,937 35,460/204,280/ 457,172
72 397,500/428,177/499,299 17,933/150,679/ 708,001
108 257,898/288,150/340,871 3,085/181,176/1,257,109
It can be seen that the hybrid pvqspinlocks are more fair and
performant than the unfair locks in this test.
The table below shows the kernel build times on a smaller 2-socket
16-core 32-thread E5-2620 v4 system.
vCPUs pvqlock hybrid pvqlock unfair lock
----- ------- -------------- -----------
16 436.8s 433.4s 435.6s
36 366.2s 364.8s 364.5s
48 423.6s 376.3s 370.2s
64 433.1s 376.6s 376.8s
Again, the performance of the hybrid pvqspinlock was comparable to
that of the unfair lock.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1510089486-3466-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order for memory pages to be properly mapped when SEV is active, it's
necessary to use the PAGE_KERNEL protection attribute as the base
protection. This ensures that memory mapping of, e.g. ACPI tables,
receives the proper mapping attributes.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kvm@vger.kernel.org
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20171020143059.3291-11-brijesh.singh@amd.com
In preperation for a new function that will need additional resource
information during the resource walk, update the resource walk callback to
pass the resource structure. Since the current callback start and end
arguments are pulled from the resource structure, the callback functions
can obtain them from the resource structure directly.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20171020143059.3291-10-brijesh.singh@amd.com
The walk_iomem_res_desc(), walk_system_ram_res() and walk_system_ram_range()
functions each have much of the same code.
Create a new function that consolidates the common code from these
functions in one place to reduce the amount of duplicated code.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171020143059.3291-9-brijesh.singh@amd.com
We use alternatives_text_reserved() to check if the address is in
the fixed pieces of alternative reserved, but the problem is that
we don't hold the smp_alt mutex when call this function. So the list
traversal may encounter a deleted list_head if another path is doing
alternatives_smp_module_del().
One solution is that we can hold smp_alt mutex before call this
function, but the difficult point is that the callers of this
functions, arch_prepare_kprobe() and arch_prepare_optimized_kprobe(),
are called inside the text_mutex. So we must hold smp_alt mutex
before we go into these arch dependent code. But we can't now,
the smp_alt mutex is the arch dependent part, only x86 has it.
Maybe we can export another arch dependent callback to solve this.
But there is a simpler way to handle this problem. We can reuse the
text_mutex to protect smp_alt_modules instead of using another mutex.
And all the arch dependent checks of kprobes are inside the text_mutex,
so it's safe now.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Fixes: 2cfa197 "ftrace/alternatives: Introducing *_text_reserved functions"
Link: http://lkml.kernel.org/r/1509585501-79466-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
