"ret" is normally used as a variable name for return values. In
fsl_sai_set_bclk() it stores the difference between the desired rate and
the rate we can archieve, so rename it to "diff". Also rename "savesub"
to "bestdiff" as that stores the best difference we have found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-6-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver tests for the hardware revision being newer than 3.1
with (sai->verid.major >= 3 && sai->verid.minor >= 1). The result
is obviously wrong for hardware revision 4.0. Fix this by storing
the full version in a single variable and comparing to that one.
No practical change at the moment as there is no 4.0 ip version
currently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-5-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on SAI synchronization mode, the same value is either
written to FSL_SAI_TCR2 or FSL_SAI_RCR2 or nothing is written at all.
As the computation is the same either way, factor it out to make it
clearer what the difference is. No functional change.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-4-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a boolean "irq_none" to describe the interrupt
handlers return value use a variable of type irqreturn_t and return
it directly. No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-3-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The fsl_sai driver has FSL_FMT_TRANSMITTER and FSL_FMT_RECEIVER defines
which are used in a single function only then are then only translated
into a bool 'tx' variable. Drop the defines and pass the boolean value
directly to fsl_sai_set_dai_sysclk_tr(). No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-2-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW8738 is a simple audio amplifier using a single GPIO.
The main difference to simple-amplifier is that there is a "one-wire
pulse control" that allows configuring the amplifier to one of a few
pre-defined modes. This can be used to configure the speaker-guard
function (primarily the power limit for the amplifier).
Add a simple driver that allows setting it up in the device tree
with a specified mode number.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220304102452.26856-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio hardware cannot support the same slot width for all sample
widths, or a slot width equal to the sample width for all sample widths.
This is usually due either to limitations of the audio serial port or
system clocking restrictions.
A typical example would be:
- 16-bit samples in 16-bit slots
- 24-bit samples in 32-bit slots
The new dai-tdm-slot-width-map property allows setting a mapping of
sample widths and the corresponding tdm slot widths and slot counts.
Although the slot count is usually the same for all cases this does
allow for adding padding slots to maintain the same bitclk frequency.
The property is added to each endpoint node that needs the component
DAI to be told the TDM slot width and count.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220228172754.453783-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Host is trying to acquire semaphore lock based on HW_SEM_RETRY_COUNT
value which is set to 10 by default. So host will loop for 10 times
trying to acquire lock before giving error msg "Failed to acquire HW
lock". Though this loop count of 10 is good enough with most of the
times but we have observed such failure msg in very few cases(~5 %).
Increase ACP_HW_SEM_RETRY_COUNT to avoid such issue and loop for a
significant time period before throwing error. We're setting newer
loop count to quite higher value of 10K but it's very unlikely that
it will loop for this count, since for most of the cases lock will
get acquired at much lesser loop iterations.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using PTE_GRP1 for DMA operations to load firmware binaries
but we are enabling PTE_GRP and flushing ATU cache much before in
probe callbacks. This can cause issue if we try to load firmware
runtime during system resume as probe callback will not be invoked
hence PTE_GRP will not be enabled. Moreover it makes more sense to
flush the cache after register configuration.
Move PTE group register configuration to acp-loader within pre_fw_run
callback to avoid such issue.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add lock and unlock around ipc irq handling code using hw semaphore
register that exhibit special property for register read calls. As
host and DSP firmware uses few shared registers, there is a possible
race condition around those shared registers values. This lock ensure
synchronization between Firmware and host ipc interrupts.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP_SRAM_PTE block has cache that needs to be flushed after every
PTE updates. This patch updates ACPAXI2AXI_ATU_CTRL register to
flush cache after updating PTE with stream physical address.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipc_pcm_params() ops implementation for AMD is a NOP and since the
callback is marked now as optional, it can be dropped along with the
empty function.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the values from ipc_params, take them directly from
substream->runtime.
This is in preparation of making the platform hw_params callback to be
IPC agnostic.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Raptor Lake S.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Global enable must happen before CSPL_MBOX_CMD_RESUME command
is sent. Move it to PRE_PMU as both events use
SND_SOC_DAPM_OUT_DRV_E macro.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220303173059.269657-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix GPIO2 polarity and direction configuration
Fixes: fe1024d504 ("ASoC: cs35l41: Combine adjacent register writes")
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220303173059.269657-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel HDMI LPE audio driver has its own mmap callback that mimics with
the noncached page attributes, but this is rather superfluous and can
be replaced with the standard helper, as the device is only for
playback and the write-cache should suffice.
This patch drops the own code and just uses the standard helper.
Link: https://lore.kernel.org/r/20220305083308.15718-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New device id for Corsair Virtuoso SE RGB Wireless that currently is not
in the mixer_map. This entry in the mixer_map is necessary in order to
label its mixer appropriately and allow userspace to pick the correct
volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless
headset has this new ID and consequently, the sidetone and volume are not
working correctly without this change.
> sudo lsusb -v | grep -i corsair
Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
idVendor 0x1b1c Corsair
iManufacturer 1 Corsair
iProduct 2 CORSAIR VIRTUOSO SE Wireless Gaming Headset
Signed-off-by: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304212303.195949-1-reza.jahanbakhshi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AV/C deferred transaction was supported at a commit 00a7bb81c2 ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:
kernel: ================================================================================
kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9
kernel: load of value 158 is not a valid value for type '_Bool'
kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu
kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019
kernel: Call Trace:
kernel: <IRQ>
kernel: show_stack+0x52/0x58
kernel: dump_stack_lvl+0x4a/0x5f
kernel: dump_stack+0x10/0x12
kernel: ubsan_epilogue+0x9/0x45
kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49
kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib]
kernel: fcp_response+0x28/0x30 [snd_firewire_lib]
kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core]
kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core]
kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci]
kernel: tasklet_action_common.constprop.0+0xea/0xf0
kernel: tasklet_action+0x22/0x30
kernel: __do_softirq+0xd9/0x2e3
kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0
kernel: do_softirq+0x75/0xa0
kernel: </IRQ>
kernel: <TASK>
kernel: __local_bh_enable_ip+0x50/0x60
kernel: irq_forced_thread_fn+0x7e/0x90
kernel: irq_thread+0xba/0x190
kernel: ? irq_thread_fn+0x60/0x60
kernel: kthread+0x11e/0x140
kernel: ? irq_thread_check_affinity+0xf0/0xf0
kernel: ? set_kthread_struct+0x50/0x50
kernel: ret_from_fork+0x22/0x30
kernel: </TASK>
kernel: ================================================================================
This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.
Fixes: 00a7bb81c2 ("ALSA: firewire-lib: Add support for deferred transaction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220304125647.78430-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
vmalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the return
of it to catch the error in time.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4221FC4089F6DF01C48F192E5784038BA205@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable bytes is being assigned a value that is never read, it
is being re-assigned inside a following if block. The assignment is
redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/echoaudio/midi.c:211:9: warning: Although the value stored
to 'bytes' is used in the enclosing expression, the value is never
actually read from 'bytes' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220302170728.1094633-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fix the second dai driver's dai widget can't connect to the
endpoint. Because "bt-sco-pcm" and "bt-sco-pcm-wb" dai driver have the
same stream_name, so it will cause they have the same widget name.
Therefor it will just create only one route when do snd_soc_dapm_add_route
that only find the widget through the widget name.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/20220302013533.29068-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pcm name can be "Analog" and "Alt Analog", cpcm->name can be
"Analog Codec DAI" and "Alt Analog Codec DAI". When pcm_name
is "Analog", "Analog Codec DAI" and "Alt Analog Codec DAI" are
both satisfy the 'if (strstr(cpcm->name, pcm_name))' condition,
which may cause the returned cpcm to be "Alt Analog Codec DAI".
Even if we get the pcm name by id, and "Analog Codec DAI" goes
into the loop before "Alt Analog Codec DAI", but I still think
we'd better have multiple insurances against unexpected return
values. After, we can correctly return the expected result
even if other relevant places are changed.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220302094351.3487-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Two cleanups to remove an unused filename and typos, and one addition
of an ACPI matching table for a Dell SoundWire SKU without local
microphones.
The main change is the addition of a common 'sof-ssp-amp' machine
driver for devices with amplifiers only (no headset codec) and
different connections using I2S links (Bluetooth offload, HDMI
receiver). It's likely that the amplifier will be swapped out by OEMs,
this machine driver provides a relatively generic solution to avoid
copy-paste of similar solutions.
The copy_to/from_user() functions return the number of bytes remaining
to be copied. This function needs to return negative error codes
because snd_soc_pcm_component_copy_user() treats positive returns as
success in soc_component_ret().
Fixes: 7d7209557b ("ASoC: qcom: Add support for codec dma driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301081104.GB17375@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
There is one call trace that snd_soc_register_card()
->snd_soc_bind_card()->soc_init_pcm_runtime()
->snd_soc_dai_compress_new()->snd_soc_new_compress().
In the trace the 'codec_dai' transfers from card->dai_link,
and we can see from the snd_soc_add_pcm_runtime() in
snd_soc_bind_card() that, if value of card->dai_link->num_codecs
is 0, then 'codec_dai' could be null pointer caused
by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'.
And snd_soc_register_card() is called by various platforms.
Therefore, it is better to add the check in the case of misusing.
And because 'cpu_dai' has already checked in soc_init_pcm_runtime(),
there is no need to check again.
Adding the check as follow, then if 'codec_dai' is null,
snd_soc_new_compress() will not pass through the check
'if (playback + capture != 1)', avoiding the leftover use of
'codec_dai'.
Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1634285633-529368-1-git-send-email-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In dmaengine_pcm_set_runtime_hwparams() period_bytes_min is hardcoded to
256. For some applications that may be too big. This patch changes that
to calculate the value based on dma_data->maxburst. The correct value
would be maxburst multiplied by the address width of the hardware FIFO.
Unfortunately the address width is dynamically calculated based on the
stream parameters and is not known at open time, so the worst case
is chosen here which is 8 bytes, the maximum that is supported by
dmaengine drivers.
Not all drivers may set a maxburst value, so we fall back to the
previously used hardcoded value of 256 bytes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220301113446.1053171-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it, as same as clk_prepare_enable().
Fixes: c9afc1834e ("ASoC: dwc: Disallow building designware_pcm as a module")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301084742.3751939-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it and return error if fals.
Fixes: cbaadf0f90 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301090637.3776558-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it, like mxs_saif_trigger().
Fixes: d0ba4c0149 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301081717.3727190-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Support configuration with SoundWire RT1316 amplifiers on link0 and
link1, and RT711 on link2 for headphone/headset. This product does not
support local microphones.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of CS35L41 amplifier to the machine driver, as well as
the support of HDMI playback and BT offload DAI Link.
Rename the driver to a generic name to support different amplifiers
from different vendors.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement cs35l41 support code in this common module so it could be
shared between multiple SOF machine drivers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the code related to rt1308 dai link to the realtek common module.
It creates a clean base to add more amplifier support to this machine
driver in the future.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move sof_realtek_common.o to a dedicated module like the module to
support maxim amplifiers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding separate I2S machine driver for RT1308.
Adding support for HDMI-In capture via I2S in slave mode configuration.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: balamurugan.c <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
copy/paste spelling issues with platforms and buttons.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: FRED OH <fred.oh@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've been using a default firmware name for each PCI/ACPI/OF platform
for a while. The machine-specific sof_fw_filename is in practice not
different from the default, and newer devices don't set this field, so
let's remove the redundant definitions.
When OEMs modify the base firmware, they can keep the same firmware
name but store the file in a separate directory.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220302074241.30469-1-nizhen@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
WSA SoundWire Controller does not support Clock stop and performs a soft reset
on suspend resume path. Its recommended that WSA881x codecs connected to this
are also reset using a hard reset during suspend resume.
So this codec driver performs a hard reset during suspend resume cycle.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220228144235.24208-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Return the result from file->f_op->open() directly instead of
taking this in another redundant variable. Make the typical
return the last statement, return early and reduce the indentation
too.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220228050253.1649-2-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Initializing the static variable to 0 causes the following error
when exec checkpatch:
ERROR: do not initialise statics to 0
FILE: sound/sound_core.c:142:
static int preclaim_oss = 0;
In addition, considering the following way of writing
139: #ifdef config_sound_oss_core_preclaim
140: Static int preclaim_oss = 1;
141: #ELSE
142: Static int preclaim_oss = 0;
143: #ENDIF
We can optimize it by IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM),
so modified it to
static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM);
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220228050253.1649-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 3568459a51 ("ALSA: at73c213: manage SSC clock")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220228022839.3547266-1-jiasheng@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220225111929.17194-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I have no reason to believe these boards have any more users and I
haven't tested them for several years. Removing them may simplify
other changes to the various PXA boards people still care about.
The recent conversion of pxa2xx_spi to GPIO descriptors for example
had to update this board despite no one caring or testing.
Great boards that got me started in kernel development, RIP!
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As part of moving to remove the old style defines for the bus clocks update
the es7241 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222223300.3120298-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98927 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-10-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98926 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-9-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98925 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max9867 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max9860 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max9850 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98390 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98371 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98095 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98088 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda134x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003409.1820405-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the ml26124 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223001636.1321505-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm512x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm3168a driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm186x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm1681 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm3060 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014731.2765283-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 70d435ba1c ("ASoC: imx-pcm-dma: simplify pcm_config") the size
argument to imx_pcm_dma_init() is unused, so drop it. Also remove the
now unused defines that the users of imx_pcm_dma_init() used to pass the
size argument
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220223130625.3430589-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warning:
./sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:3126:2-9: line 3126 is
redundant because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220224011046.76904-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 5f9a50c3e5 ("ASoC: Davinci: McBSP: add device tree support for McBSP")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220228031540.3571959-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the mc13783 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223001416.1235951-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the isabelle driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222225014.3691208-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous condition is used to cross check only the active
stream status for I2S HS instance playback and capture use cases.
Modified logic to invoke sequence for two i2s controller instances.
This also fixes warnings reported by kernel robot:
"warning: variable 'frmt_val' set but not used"
"warning: variable 'reg_val' set but not used"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220225193054.24916-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the es8328 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222223534.3212743-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the inno_rk3036 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222224816.3636987-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the es8316 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222223453.3190333-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the wl1273 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003810.1947495-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the es7134 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222222715.2994339-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the twl4030 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220223003046.1697784-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda1334 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003207.1748248-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda1380 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003707.1903798-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the si476x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223001737.1360028-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the sti-sas driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223002502.1451015-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220227050928.32270-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tscs454 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223002751.1574345-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tscs42xx driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223002751.1574345-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the lm49453 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222225135.3726158-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for enabling required power domains in digital macro codecs.
macro and dcodec power domains are being requested as clocks by HLOS
in ADSP based architectures and ADSP internally handling as powerdomains.
In ADSP bypass case need to handle them as power domains explicitly.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1645898959-11231-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for runtime pm on tx/rx/wsa/wcd lpass macro,
wsa881x and wcd938x codecs that are wired up on SoundWire bus. During
pm testing it was also found that soundwire clks enabled by lpass macros
are not enabling all the required clocks correctly, so last 3 patches
corrects them.
Tested this on SM8250 MTP along SoundWire In band Headset Button wakeup
interrupts.
under low power state a SoundWire Wake IRQ could trigger MBHC interrupts
so make sure that codec is not in suspended state when this happens.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-17-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_kzalloc() in acp_legacy_dai_links_create() can fail,
so its return value should be checked.
Fixes: d4c750f2c7 ("ASoC: amd: acp: Add generic machine driver support for ACP cards")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225131645.27556-1-baijiaju1990@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return
value should be checked.
Fixes: 457c25efc5 ("ASoC: rt5663: Add the function of impedance sensing")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225131030.27248-1-baijiaju1990@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Other commit added the declaration of the sof_compressed_ops, drop the
instance which added it as Platform specific ops, which the
sof_compressed_ops is not.
76cdd90b27 ("ASoC: SOF: pcm: Add compress_ops for SOF platform component driver")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220225120034.11028-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220225112358.19403-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the common compare helper from component.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jeremy Szu <jeremy.szu@canonical.com>
Cc: Werner Sembach <wse@tuxedocomputers.com>
Cc: Hui Wang <hui.wang@canonical.com>
Cc: Cameron Berkenpas <cam@neo-zeon.de>
Cc: Kailang Yang <kailang@realtek.com>
Cc: Lucas Tanure <tanureal@opensource.cirrus.com>
Cc: Sami Loone <sami@loone.fi>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-24-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>:
This patch set is to add support for Audio over wcd codec,
digital mics, through digital codecs and without ADSP.
Changes Since V15:
-- Bisect patches to avoid build failure in other architectures.
-- Remove redundant variables lpass variant structure.
Changes Since V14:
-- Split common wrapper function to separate wrapper for each handle in platform driver.
-- Update cdc dma buffer handling with memremap with ioremap.
-- Remove redundant error prints.
-- Update irq flag.
Changes Since V13:
-- Change bulk cdc clock voting to individual clock voting.
-- Remove redundant code, conditional check and prints.
-- Fix typo errors.
Changes Since V12:
-- Fix arguments type mismatch.
Changes Since V11:
-- Fix kernel robot issue on arguments type mismatch.
Changes Since V10:
-- Split bulk clock voting to individual clock voting as per use case in cdc-dma driver.
-- Add missing codec dma clocks.
-- Update rxtx lpm buffer size.
Changes Since V9:
-- Change individual clock voting to bulk clock voting of lpass-sc7280 platform driver.
-- Remove redundant clocks in lpass variant structure.
-- Add mclk for MI2S based headset path.
-- Remove unused lpass variant structure members in lpass header.
Changes Since V8:
-- Fix errors in sc7280 lpass cpu dt-bindings.
-- Move to quicinc domain email id's.
Changes Since V7:
-- Fix indentation errors.
-- Bisect patches to avoid interdependency.
Changes Since V6:
-- Split cdc dma regmap config macros.
-- Add write dma reg fields for i2s path.
-- Add helper function to distinguish rxtx and va dma ports.
-- Optimizing clock and reg name in cpu dt-bindings.
-- Update buffer management for cdc dma path.
-- Remove Kconfig fields of machine driver.
Changes Since V5:
-- Include MI2S primary node to snd_soc_dai_driver in lpass-sc7280 platform driver.
-- Move dependency patch list to corresponding patch.
-- Add support for missing cdc-dma ports.
-- Change if/else conditional statements to switch cases.
-- Add missing error handlings.
-- Typo errors fix.
Changes Since V4:
-- Remove unused variable in lpass-sc7280 platform driver.
Changes Since V3:
-- Remove redundant power domain controls. As power domains can be configured from dtsi.
Changes Since V2:
-- Split lpass sc7280 cpu driver patch and create regmap config patch.
-- Create patches based on latest kernel tip.
-- Add helper function to get dma control and lpaif handle.
-- Remove unused variables.
Changes Since V1:
-- Typo errors fix
-- CPU driver readable/writable apis optimization.
-- Add Missing config patch
-- Add Common api for repeated dmactl initialization.
Srinivasa Rao Mandadapu (9):
ASoC: qcom: Move lpass_pcm_data structure to lpass header
ASoC: qcom: lpass: Add dma fields for codec dma lpass interface
ASoC: qcom: Add helper function to get dma control and lpaif handle
ASoC: qcom: Add register definition for codec rddma and wrdma
ASoC: qcom: Add regmap config support for codec dma driver
ASoC: qcom: Add support for codec dma driver
ASoC: qcom: Add lpass CPU driver for codec dma control
ASoC: dt-bindings: Add SC7280 lpass cpu bindings
ASoC: qcom: lpass-sc7280: Add platform driver for lpass audio
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 75 ++-
sound/soc/qcom/Kconfig | 11 +
sound/soc/qcom/Makefile | 4 +
sound/soc/qcom/lpass-cdc-dma.c | 301 ++++++++++
sound/soc/qcom/lpass-cpu.c | 253 ++++++++-
sound/soc/qcom/lpass-lpaif-reg.h | 127 ++++-
sound/soc/qcom/lpass-platform.c | 628 ++++++++++++++++++---
sound/soc/qcom/lpass-sc7280.c | 438 ++++++++++++++
sound/soc/qcom/lpass.h | 141 +++++
9 files changed, 1890 insertions(+), 88 deletions(-)
create mode 100644 sound/soc/qcom/lpass-cdc-dma.c
create mode 100644 sound/soc/qcom/lpass-sc7280.c
--
2.7.4
Fix the following sparse error:
sound/soc/sof/compress.c:310:25: error: symbol 'sof_compressed_ops' was not declared. Should it be static?
Do not enable set the pd->compress_ops yet as it is not a valid assumption
that real compress support really works when CONFIG_SND_SOC_SOF_COMPRESS
is set as the HDA Probes support also selects it, but compressed audio
is not supported (yet) on Intel platforms.
Fixes: 6324cf901e ("ASoC: SOF: compr: Add compress ops implementation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220224172324.17976-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Upadate lpass cpu and platform driver to support audio over codec dma
in ADSP bypass use case.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1645716828-15305-7-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support function to get dma control and lpaif handle to avoid
repeated code in platform driver
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1645716828-15305-4-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare lpass_pcm_data structure in lpass header file instead of
platform source file to make common use of it by other drivers
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1645716828-15305-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have newer renoir platforms with different codecs combinations.
Add struct in legacy machine driver and add to list of supported
renoir machine to support sound card registration on platform with
rt5682s as primary headset codec and max98360 and rt1019 as speaker
amp codec.
This also fixes error reported by kernel robot:
"error: 'EN_SPKR_GPIO_DW' undeclared here"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220222124213.721224-3-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change sound card name for guybrush machine with rt5682 as primary
codec and rt1019 amp to align with names given in UCM config.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220222124213.721224-2-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_component_update_bits returns 1 if the operation was
successful and some bits were changed, so we cannot
return this value directly as it can be interpreted
as an error. Instead, do some minor mangling to avoid
inadvertently returning an error.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202241021420.20760@lnxricardw1.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that sof_compressed_ops initial implementation was merged
we can enable it in SOF platform component driver.
This partially reverts commit
8a72072458 ("ASoC: SOF: pcm: Remove non existent CONFIG_SND_SOC_SOF_COMPRESS reference")
Reported-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220223153849.84471-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some powers were changed during the jack insert detection and clk's
enable/disable in CCF.
If in parallel, the influence has a chance to detect the wrong jack
type.
We refer to the below commit of the variant codec (rt5682) to fix
this issue.
ASoC: rt5682: Fix deadlock on resume
1. Remove rt5682s_headset_detect in rt5682s_jd_check_handler and
use jack_detect_work instead of.
2. Use dapm mutex used in CCF to protect most of jack_detect_work.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220223101450.4577-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Yoga Tablet 2 1050F/L tablets use an ACPI HID of "10WM5102"
for their wm5102 codec, add this to the list of HIDs for the wm5102 codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220223135237.731638-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of ACP programming sequence, ACP_CONTROL and ACP_CLKMUX_SEL
registers should be updated during acp init and de-init sequence.
This patch updates register sequence during ACP init and
deinit.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220223071959.13539-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP I2S controller has limitation to program different BCLK
for TX and RX paths.
Headset path uses I2S SP controller instance.
As per requirement, Restricted 32 bits as sample bits by
applying pcm constraint in startup calabck for Headset path.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220223071959.13539-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pre power on widget event.
Based on this event update platform clock control sequence.
This will fix Codec clock and pll restoration issue during
system level resume.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220223071959.13539-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable no_capture_mute_flag in nau8821 codec driver.
This will fix active playback stream mute issue when capture
stream got closed.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220223071959.13539-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor I2S Master mode clock programming sequence code.
This will also fix the i2s clocks restore issue during system level
resume.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220223071959.13539-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few more fixes for v5.17, one followup to the bounds checking fixes
handling controls which support negative values internally and a driver
specific one.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmIWK1EACgkQJNaLcl1U
h9Dkuwf/WJfavINTmmR9P+RyIZAO4IjDm75Gjn6QjxiWgrmFPs9hnsd++aDZeyWT
8A2kcBbJY57AOfWDi66O9APDDNTVKy/0tqt9TKNmw7xxja8keE98RNRWVnnbTILU
HZ3FC25chSQ/dMykv6Rd5FuJH6Axc0VOE9NTGWy158lTXVnYqaxcPWnJfIe0yMHO
/3M5s9GL9iasXII50CRLAfhPfDQOHElYvrYyuNmjzSkYnGlTD0lckao7+SSchHfB
X4YMEdCBnzf9GaSG4uBLGRJmgUgvyE2LJU3kZ7VIxT0FREpD3we0MXWcOmMrVvok
yrYQTsqjVF2ai3rNNj0MH8CkuXPR5Q==
=EAZn
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.17-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.17
A few more fixes for v5.17, one followup to the bounds checking fixes
handling controls which support negative values internally and a driver
specific one.
The sc7280 driver really does depend on SOUNDWIRE since it calls various
sdw_ functions (eg, sdw_enable_stream(), sdw_prepare_stream()) which do
not have stubs when that is disabled so we can't build with COMPILE_TEST.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223011913.2753938-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd934x_rx_hph_mode_put currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: 1cde8b8223 ("ASoC: wcd934x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
set "HPH Type" Kcontrol max value of WCD_MBHC_HPH_STEREO instead of UINT_MAX.
set "HPHL/R Impedance" Kcontrols max value to INT_MAX instead of UINT_MAX as
max field is integer type.
Without this patch amixer for these controls will show -1 as max value to userspace.
Fixes: 9fb9b1690f ("ASoC: codecs: wcd934x: add mbhc support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
set "HPH Type" Kcontrol max value of WCD_MBHC_HPH_STEREO instead of UINT_MAX.
set "HPHL/R Impedance" Kcontrols max value to INT_MAX instead of UINT_MAX as
max field is integer type.
Without this patch amixer for these controls will show -1 as max value to userspace.
Fixes: bcee7ed09b ("ASoC: codecs: wcd938x: add Multi Button Headset Control support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Accessing enums using integer would result in array out of bounds access
on platforms like aarch64 where sizeof(long) is 8 compared to enum size
which is 4 bytes.
Fix this by using enumerated items instead of integers.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Accessing enums using integer would result in array out of bounds access
on platforms like aarch64 where sizeof(long) is 8 compared to enum size
which is 4 bytes.
Fixes: 908e6b1df2 ("ASoC: codecs: lpass-va-macro: Add support to VA Macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Accessing enums using integer would result in array out of bounds access
on platforms like aarch64 where sizeof(long) is 8 compared to enum size
which is 4 bytes.
Fixes: 4f692926f5 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
AUX interpolator does not have compander, so check before accessing
compander data for this.
Without this checkan array of out bounds access will be made in
comp_enabled[] array.
Fixes: 4f692926f5 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220222183212.11580-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Normally, the clock source of audio module is either 26M or APLL1/APLL2,
but APLL1/APLL2 are not the multiple of 26M.
In the patch, APLL1 and APLL2 tuners are enabled to handle sample rate
mismatch when the data path crosses two different clock domains.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220221055716.18580-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Felwinter uses four max98360a amplifiers on corresponding CH0~CH3.
There are four amps on the board connecting to headphone to SSP0 port,
amp to SSP1,and the DAI format would be DSP_A,8-slots, 32 bit slot-width.
CH0: L(Woofer), CH1:R(Woofer), CH2:L(Tweeter), CH3:R(Tweeter)
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220218082741.1707209-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra234 chip scratch register communication between audio
and hdmi driver differs slightly in the way it triggers the
interrupt compared to legacy chips. Interrupt is triggered
by writing non-zero values to verb 0xF80 instead of 31st bit
of scratch register.
DP MST support changed the NID to be used for scratch register
read/write from audio function group NID to Converter widget NID.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-4-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GCAP register on Tegra234 implies no Input Streams(ISS)
supported, but the HW output stream descriptor programming
should start with offset 0x20*4 from base stream descriptor
address. This will be a problem while calculating the offset
for output stream descriptor which will be considering input
stream also. So here output stream starts with offset 0 which
is wrong as HW register for output stream offset starts with 4.
So hardcode the input stream numbers to 4 to avoid the issue
in offset calculation.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add hda driver support for the Tegra234 chip. The hdacodec
on this chip now supports DP MST feature, HDA block contains
azalia controller and one hda-codec instance by supporting
4 independent output streams over DP MST mode. There is no
input stream support.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220216092240.26464-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With few changes, snd_hda_codec_set_power_save() and
snd_hda_codec_cleanup_for_unbind() can be re-used by ASoC drivers.
While at it, provide kernel doc for the exposed functions.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With few changes, snd_hda_codec_register() and its
unregister-counterpart can be re-used by ASoC drivers. While at it,
provide kernel doc for the exposed functions.
Due to ALSA-device vs ASoC-component organization differences, new
'snddev_managed' argument is specified allowing for better control over
codec registration process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With few changes, snd_hda_codec_device_init() can be re-used by ASoC
drivers. While at it, provide kernel doc for the exposed function.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch exposes a new helper to directly retrieve the link from the
codec address, and makes use of this helper when retrieving the link
from the codec name.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Implement HDA keep alive (KAE) support for Intel display codecs. When no
audio stream is active, the display codec will provide a continuous clock
and a valid but silent audio stream to any connected HDMI/DP receiver.
Without this, upon starting a new playback stream, initial samples may be
lost as many receivers require time to initialize for new clock.
This is a new feature in Intel AlderLake-P display codec implementation
and replaces the Intel i915 silent-stream extension that has been used
on older hardware. Main benefit of the new method is that codec no longer
needs to be kept in D0 power state.
This patch depends on commit 112a87c48e ("drm/i915/display: program
audio CDCLK-TS for keepalives").
[ a minor coding-style fix by tiwai ]
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jyri Sarha <jyri.sarha@intel.com>
Link: https://lore.kernel.org/r/20220216172405.3994959-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Fixes: 2c95b92ecd ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
BugLink: https://github.com/thesofproject/linux/issues/3430
Link: https://lore.kernel.org/r/20220215132756.31236-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Fixes: 2c95b92ecd ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
Acked-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
BugLink: https://github.com/thesofproject/linux/issues/3430
Link: https://lore.kernel.org/r/20220215132756.31236-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Fixes: 2c95b92ecd ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
Cc: <stable@vger.kernel.org>
BugLink: https://github.com/thesofproject/linux/issues/3430
Link: https://lore.kernel.org/r/20220215132756.31236-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On a platform shutdown, the expectation for most drivers is that
userspace tasks will release all resources. When those sequences do
not complete, it can be the case that PCM devices exposed by ALSA
cards are used *after* the DSP shutdown completes, leading to a
platform hang.
When the clients and machine drivers provide an _unregister callback,
let's invoke it in the shutdown sequence.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220216133241.3990281-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the following error messages are seen during boot:
asoc-simple-card sound: control 2:0:0:SPDIF Switch:0 is already present
cs4265 1-004f: ASoC: failed to add widget SPDIF dapm kcontrol SPDIF Switch: -16
Quoting Mark Brown:
"The driver is just plain buggy, it defines both a regular SPIDF Switch
control and a SND_SOC_DAPM_SWITCH() called SPDIF both of which will
create an identically named control, it can never have loaded without
error. One or both of those has to be renamed or they need to be
merged into one thing."
Fix the duplicated control name by combining the two SPDIF controls here
and move the register bits onto the DAPM widget and have DAPM control them.
Fixes: f853d6b3ba ("ASoC: cs4265: Add a S/PDIF enable switch")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220215120514.1760628-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While the $val/$val2 values passed in from userspace are always >= 0
integers, the limits of the control can be signed integers and the $min
can be non-zero and less than zero. To correctly validate $val/$val2
against platform_max, add the $min offset to val first.
Fixes: 817f7c9335 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220215130645.164025-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
the other patches from the "[PATCH v6 0/9] Support Spi in
i2c-multi-instantiate driver" series.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmH6vlwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3sAf+JoNPIvjcZLsrl1Xf5mk44c7Qg0BL
uknI7jj3FJem65uG4PKkB0SQ2Ysd5TfH0NQaUG3oiq+YqPJUjIm2qtsyBOT/cUWP
3EcCjX8/kYBtotTU3t16ciZCKXHW9zNvxTttUQJdDLEWyRLZ8RlRBTvcATdNK9DA
POA/f+Dh0PBhPFf4V5/XjylELNLAvzK+rYk2IdrGCSe6P3DOJU7M96qRHM7JQSym
tfxswPRwCDNr4A/3yRnI+N1XKwEdoEpiGIY2cXqoSzIePRjzvsxby9wLSuG4wp95
2/AUj4G9biQMsUSZoyeNU4henoNtUnUn8DOYa1ZaYxXl4nh04yICrqfLLg==
=njf6
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into for-next
This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag +
the other patches from the "[PATCH v6 0/9] Support Spi in
i2c-multi-instantiate driver" series.
In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only const array rates on the stack but
instead it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220214213223.65780-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel's kernel test robot found the following randconfig combination:
SND_SOC_SOF=y
SND_SOC_SOF_CLIENT=m
In this the sof-client object is not going to be built into the snd-sof.o
and we will have undefined references to the sof-client functions.
Fixes: 6955d9512d ("ASoC: SOF: Introduce IPC SOF client support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Ujfalusi <Peter Ujfalusi <peter.ujfalusi@linux.intel.com>>
Link: https://lore.kernel.org/r/20220214071330.22151-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More fixes that have arrived in the past few -rcs, plus a MAINTAINERS
update. The biggest update here is the fix for control change
notifications in ASoC generic controls found by mixer-test.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmIKgz8ACgkQJNaLcl1U
h9Conwf6A3asUY/E6bxnHR82zjXlTi9h8o4gpduu1v38J+npn37cSz7w50AZq2o3
SCbedB5LuZpGRKgP9tXPR3jqmXDwBH2D7cazISXLXLq8CKMHxuGuvY6vxaw7x+xz
T7MIinNr9FGn5uqrTmmucRj7YyxA4YRQteQTRq5ixjUW/XvdIXcmOVY0ZO+P09Iq
RBAZFtqNOh+AEdKddEfG3yykm1gU6rhvZM52KeJds22MSVCpQSYRe64yIwizERFr
Jcb3qfuDtrVx0WaIW8H4jxfrHUw4ZbVs8ut2Z7fUwG2S1tiR88uNYiQ1uoMKAdQT
WKLx/No3uLk2hZ8UszPc6KUqcrbGRA==
=FeYQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
More fixes that have arrived in the past few -rcs, plus a MAINTAINERS
update. The biggest update here is the fix for control change
notifications in ASoC generic controls found by mixer-test.
Merge series from Nikita Yushchenko <nikita.yoush@cogentembedded.com>:
These patches clean up pcm3168a driver, without introducing any
functional change.
Add switch control for selecting CTIA or OMTP Headset by swapping
gnd and mic with the help of GPIO.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644668672-29790-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recently introduced coef_mutex for Realtek codec seems causing a
deadlock when the relevant code is invoked from the power-off state;
then the HD-audio core tries to power-up internally, and this kicks
off the codec runtime PM code that tries to take the same coef_mutex.
In order to avoid the deadlock, do the temporary power up/down around
the coef_mutex acquisition and release. This assures that the
power-up sequence runs before the mutex, hence no re-entrance will
happen.
Fixes: b837a9f5ab ("ALSA: hda: realtek: Fix race at concurrent COEF updates")
Reported-and-tested-by: Julian Wollrath <jwollrath@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220214132838.4db10fca@schienar
Link: https://lore.kernel.org/r/20220214130410.21230-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The default mixer resume code treats the errors at restoring the
modified mixer items as a fatal error, and it returns back to the
caller. This ends up in the resume failure, and the device will be
come unavailable, although basically those errors are intermittent and
can be safely ignored.
The problem itself has been present from the beginning, but it didn't
hit usually because the code tries to resume only the modified items.
But now with the recent commit to forcibly initialize each item at the
probe time, the problem surfaced more often, hence it appears as a
regression.
This patch fixes the regression simply by ignoring the errors at
resume.
Fixes: b96681bd58 ("ALSA: usb-audio: Initialize every feature unit once at probe time")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215561
Link: https://lore.kernel.org/r/20220214125711.20531-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On BIAS STANDBY->OFF transition the current implementation sleeps
600ms on suspend in order to discharge the chip. The suspend is
propagated from "snd_soc_suspend" call for all audio cards in a
serial fashion, thus in case of boards like i.MX8DXL EVK which has
3 distinct WM8960 codecs the total cumulated sleep on suspend is 1.8
seconds.
On the other hand the BIAS OFF->STANDBY transition happens
asynchronously with regard to "snd_soc_resume" - the call is
propagated from "soc_resume_deferred" which is just scheduled
from "snd_soc_resume", each card having its own work scheduled to
execute "soc_resume_deferred" call.
The patch performs discharge completion on BIAS OFF->STANDBY transition
so that the cumulated effect on suspend described above is avoided
and discharge is completed in paralel in case of multiple WM8960
codecs on the board.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/20220208121727.4461-1-viorel.suman@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2C remove function is empty for the wm8731 driver, it can just be
deleted.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220211165811.1176005-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- drop incomplete (not tdm-aware) calculation/setting of hardware
fmt value from pcm3168a_set_dai_fmt(); instead, store original
SND_SOC_DAIFMT* setting in io_params
- in pcm3168a_hw_params(), do all checks in terms of SND_SOC_DAIFMT*,
and convert that to register bitfield values only to write to
hardware
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20220208084220.1289836-4-nikita.yoush@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- group together code lines that calculate value for msad/msda field
- rename variables to better match their meaning:
val -> ms,
max_ratio -> num_scki_ratios
- update variable types to match exactly parameters or return types
of the calls where those variables are used
- write two fields of the same register in a single regmap call
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20220208084220.1289836-3-nikita.yoush@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When checking if the requested parameters are supported, the driver uses
PCM3168A_FMT_DSP_MASK to check for PCM3168A_FMT_DSP_* values.
However, formally not only PCM3168A_FMT_DSP_* values match that
condition, PCM3168A_FMT_I2S_TDM and PCM3168A_FMT_LEFT_J_TDM also do.
The check still gives correct result because those extra values can't
be in 'fmt' at the check location. Still, to make the code less cryptic,
better to compare 'fmt' with PCM3168A_FMT_DSP_* values explicitly.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20220208084220.1289836-2-nikita.yoush@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Legion Y9000X 2019 has the same speaker with Y9000X 2020,
but with a different quirk address. Add one quirk entry
to make the speaker work on Y9000X 2019 too.
Signed-off-by: Yu Huang <diwang90@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220212160835.165065-1-diwang90@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 83b7dcbc51 introduced a generic
implicit feedback parser, which fails to execute for M-Audio FastTrack
Ultra sound cards. The issue is with the ENDPOINT_SYNCTYPE check in
add_generic_implicit_fb() where the SYNCTYPE is ADAPTIVE instead of ASYNC.
The reason is that the sync type of the FastTrack output endpoints are
set to adaptive in the quirks table since commit
65f04443c9.
Fixes: 83b7dcbc51 ("ALSA: usb-audio: Add generic implicit fb parsing")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220211224913.20683-2-matteomartelli3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a set of HD Audio PCI IDs, and the HDMI codec VID, for
Intel Raptor Lake.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220210185423.3671603-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Functions won't be directly used outside of compress.c file
so mark them as static.
This will also fix warnings reported by kernel test robot:
>> sound/soc/sof/compress.c:91:5: warning: no previous prototype for
function 'sof_compr_open' [-Wmissing-prototypes]
int sof_compr_open(struct snd_soc_component *component,
^
sound/soc/sof/compress.c:91:1: note: declare 'static' if the function
is not intended to be used outside of this translation unit
int sof_compr_open(struct snd_soc_component *component,
Fixes: 6324cf901e ("SoC: SOF: compr: Add compress ops implementation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220211082631.179735-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220210204223.104181-4-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable access to the speaker protection firmware debug stream
using compress stream API and lower minimum fragment size to
16 words.
Signed-off-by: Vlad Karpovich <Vlad.Karpovich@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer firmwares will support compressed buffers that may or may not
exist, for example debugging streams. Update the driver to make a
compressed stream optional. A warning will still be generated at DSP
boot time and opening the stream will fail if the compressed buffer in
question does not exist, however the DSP can still be booted and other
features used.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TLV320ADC3001/3101 have an internal DSP, which can either be
used in various preset configurations (called "Processing Blocks"
in the data sheet), or as a freely programmable (using the
"PurePath Studio" graphical programming tool from TI) but rather
small DSP ("miniDSP").
Using the default configuration (PRB_R1) it's possible to set up
filtering using a first-order IIR, which can be useful for adding
a digital high pass filter to the signal chain, for instance.
This patch adds support for configuring the IIR filter coefficients.
The filter itself is always enabled; the default coefficients
implement a pass-through function.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202101805360.7068@lnxricardw1.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The Linux SOF implementation is historically monolithic in a sense that all
features accessible in the firmware can be used via the snd_sof_dev struct in
one way or another.
Support for features can not be added or removed runtime and with the current
way of things it is hard if not impossible to implement support for dynamic
feature support when based on the firmware manifest we can easily enable/access
independent modules with the SOF.
In order to be able to support such modularity this series introduces a small
framework within SOF for client support using the Auxiliary bus.
Client drivers can be removed runtime and later re-loaded if needed without
affecting the core's behaviour, but it is the core's and the platform's duty
to create the Auxiliary devices usable in the platform and via the firmware.
There is still a need for SOF manifest update to convey information about
features to really make the full dynamic client device creation.
The series will introduce the core SOF client support and converts the generic
ipc flood test, ipc message injector and the probes (Intel HDA only) to a client
driver.
When parsing the compressed stream the whole buffer descriptor is
now read in a single cs_dsp_coeff_read_ctrl; on older firmwares
this descriptor is just 4 bytes but on more modern firmwares it is
24 bytes. The current code reads the full 24 bytes regardless, this
was working but reading junk for the last 20 bytes. However commit
f444da38ac ("firmware: cs_dsp: Add offset to cs_dsp read/write")
added a size check into cs_dsp_coeff_read_ctrl, causing the older
firmwares to now return an error.
Update the code to only read the amount of data appropriate for
the firmware loaded.
Fixes: 04ae085967 ("ASoC: wm_adsp: Switch to using wm_coeff_read_ctrl for compressed buffers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>:
This patch set is to add support for SC7280 sound card registration and
to add dt-bindings documentation file.
Add a new client driver for probes support and move
all the probes-related code from the core to the
client driver.
The probes client driver registers a component driver
with one CPU DAI driver for extraction and creates a
new sound card with one DUMMY DAI link with a dummy codec
that will be used for extracting audio data from specific
points in the audio pipeline.
The probes debugfs ops are based on the initial
implementation by Cezary Rojewski and have been moved
out of the SOF core into the client driver making it
easier to maintain. This change will make it easier
for the probes functionality to be added for all platforms
without having the need to modify the existing(15+) machine
drivers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the IPC message injection code out from the debug file as separate
SOF client driver.
Based on the kernel configuration, the device registration for the new IPC
message injector is going to happen in the core.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the IPC flood test code out from the debug file as separate SOF client
driver.
Based on the kernel configuration, the device registration for the new IPC
flood test is going to happen in the core.
With the separate client driver it is going to be possible to run multiple
flood tests in parallel to increase the stress, the new Kconfig option can
be used to select this (defaults to 1).
In order to preserve backward compatibility with existing SW/scripts, the
first IPC flood test's debugfs files have been linked to the old files.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SOF client can be of 'passive' type, meaning that they do not handle
PM framework callbacks by themselves but rely on the auxiliary driver's
suspend and resume callbacks to be notified about the core's suspend or
resume event.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A client in the SOF (Sound Open Firmware) context is a driver that needs
to communicate with the DSP via IPC messages. The SOF core is responsible
for serializing the IPC messages to the DSP from the different clients.
One example of an SOF client would be an IPC test client that floods the
DSP with test IPC messages to validate if the serialization works as
expected.
Multi-client support will also add the ability to split the existing audio
cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated
client instead of adding HDMI to all cards.
This patch introduces descriptors for SOF client driver and SOF client
device along with APIs for registering and unregistering a SOF client
driver, sending IPCs from a client device and accessing the SOF core
debugfs root entry.
Along with this, add a couple of new members to struct snd_sof_dev that
will be used for maintaining the list of clients.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The utils.c contains wrappers and implementation for accessing iomem mapped
regions and a single unrelated function to create a compressed page table
from snd_dma_buffer for firmware use.
The latter is used by the PCM and the dma trace code and it needs to be
moved to a generic source/header for the client conversion to be possible.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the parameter list for the firmware initiated message (IPC event)
handler functions to:
handler(struct snd_sof_dev *sdev, void *full_msg);
Allocate memory and read the whole message in snd_sof_ipc_msgs_rx() then
pass the pointer to the function handling the message.
Do this only if we actually have a function which is tasked to process the
given type.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the enum sof_dsp_power_states to include/sound/sof.h
to be accessible outside of the core SOF stack.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only reference to D3_HOT and D3_COLD DSP power state is in
intel/hda-dsp.c in form of a dev_dbg() print.
Remove them as they are not used and even if they are they could be
re-added via the substate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the sysclk and sysclk_src checking in the function set_sysclk() to
prevent the PLL power off. It is not getting re-programmed during
subsequent runs after the first run (in BIAS_OFF stage).
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20220210071900.17287-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new machine driver to register sound card on sc7280 based targets and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S and soundwire interfaces.
Add support for audio jack detection, soundwire init and MBHC.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644497415-25291-4-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add macro for lpass DAI id's max limit to create static arrays
and for array boundary checks.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644497415-25291-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit da0363f7bf ("ASoC: qcom: Fix for DMA interrupt clear reg
overwriting") we changed regmap_write() to regmap_update_bits() so that
we can avoid overwriting bits that we didn't intend to modify.
Unfortunately this change breaks the case where a register is writable
but not readable, which is exactly how the HDMI irq clear register is
designed (grep around LPASS_HDMITX_APP_IRQCLEAR_REG to see how it's
write only). That's because regmap_update_bits() tries to read the
register from the hardware and if it isn't readable it looks in the
regmap cache to see what was written there last time to compare against
what we want to write there. Eventually, we're unable to modify this
register at all because the bits that we're trying to set are already
set in the cache.
This is doubly bad for the irq clear register because you have to write
the bit to clear an interrupt. Given the irq is level triggered, we see
an interrupt storm upon plugging in an HDMI cable and starting audio
playback. The irq storm is so great that performance degrades
significantly, leading to CPU soft lockups.
Fix it by using regmap_write_bits() so that we really do write the bits
in the clear register that we want to. This brings the number of irqs
handled by lpass_dma_interrupt_handler() down from ~150k/sec to ~10/sec.
Fixes: da0363f7bf ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting")
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220209232520.4017634-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ca0106 driver code uses too generic names for its register definitions
such as PTR, DATA, IPR, etc, which may eventually conflict with other
code. This patch renames (some of) those register definitions with
CA0106_ prefix to avoid the conflicts.
Link: https://lore.kernel.org/r/20220210124227.11272-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that calling invalidate_kernel_vmap_range() is more correct
to be called before dma_sync_*(), judging from the other thread:
https://lore.kernel.org/all/20220111085958.GA22795@lst.de/
Although this won't matter much in practice, let's fix the call order
for consistency.
Fixes: a25684a956 ("ALSA: memalloc: Support for non-contiguous page allocation")
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220210123344.8756-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dma_need_sync() checks each DMA address. Fix the incorrect usages
for non-contiguous and non-coherent page allocations.
Fortunately, there are no actual call sites that need manual syncs
yet.
Fixes: a25684a956 ("ALSA: memalloc: Support for non-contiguous page allocation")
Fixes: 73325f60e2 ("ALSA: memalloc: Support for non-coherent page allocation")
Cc: <stable@vger.kernel.org>
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Link: https://lore.kernel.org/r/20220210123344.8756-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code maximizes confusion by using 'stream' and 'hstream'
variables of different types, e.g:
struct hdac_stream *stream;
struct hdac_ext_stream *stream;
struct hdac_stream *hstream;
struct hdac_ext_stream *hstream;
This confusion is partly inherited from legacy code but SOF
contributors added their own creative spin, e.g.
struct hdac_ext_stream *link_dev;
struct hdac_ext_stream *dsp_stream;
struct hdac_ext_stream hda_stream;
and my personal favorite:
stream = &hda_stream->hda_stream;
This patch suggests a consistent naming across all Intel code related
to HDAudio stream management. The convention is - by hierarchical
order:
struct sof_intel_hda_stream *hda_stream;
struct hdac_ext_stream *hext_stream;
struct hdac_stream *hstream;
No functionality change - just renaming of variables/members.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220209063104.9971-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
HD-audio driver handles the multiple instances and keeps the static
index that is incremented at each probe. This becomes a problem when
user tries to re-bind the device via sysfs multiple times; as the
device index isn't cleared unlike rmmod case, it points to the next
element at re-binding, and eventually later you can't probe any more
when it reaches to SNDRV_CARDS_MAX (usually 32).
This patch is an attempt to improve the handling at rebinding.
Instead of a static device index, now we keep a bitmap and assigns to
the first zero bit position. At the driver remove, in return, the
bitmap slot is cleared again, so that it'll be available for the next
probe.
Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220209081912.20687-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
the DMA trace implementation on AMD platform assumes that the stream_tag pointer
is pointing the stream_tag member of struct sof_ipc_dma_trace_params_ext, which
is true at the moment, but it can not be guarantied and a change in the dtrace
core can cause out of bound accesses for AMD.
For this reason, change the API to pass the struct itself which will remove the
assumption and makes it clear from both sides what is expected to be sent via the
parameter list.
This opens up a window to clean up the intel and AMD implementation at the same
time.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: intel: hda-trace: Pass the dma buffer pointer to
hda_dsp_trace_prepare
ASoC: SOF: dma-trace: Pass pointer to params_ext struct in
trace_init()
sound/soc/sof/amd/acp-trace.c | 38 ++++++++-------------------------
sound/soc/sof/amd/acp.h | 3 ++-
sound/soc/sof/intel/hda-trace.c | 17 ++++++++-------
sound/soc/sof/intel/hda.h | 3 ++-
sound/soc/sof/ops.h | 4 ++--
sound/soc/sof/sof-priv.h | 2 +-
sound/soc/sof/trace.c | 2 +-
7 files changed, 26 insertions(+), 43 deletions(-)
--
2.35.0
Merge series from Mark Brown <broonie@kernel.org>:
This series removes a bunch of spurious selects of gpiolib that were
causing noise in randconfig build tests.
Mark Brown (6):
ASoC: dmic: Remove spurious gpiolib select
ASoC: rt9120: Remove spurious gpiolib select
ASoC: simple-amplifier: Remove spurious gpiolib select
ASoC: max9759: Remove spurious gpiolib select
ASoC: zl38060: Remove spurious gpiolib select
ASoC: simple-mux: Depend on gpiolib rather than selecting it
sound/soc/codecs/Kconfig | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
base-commit: e783362eb5
--
2.30.2
The fsl_sai driver calculates the number of pins used and enables
multiple channels if necessary. This means the SAI expects data in
one FIFO per pin. The SDMA engine only services a single FIFO, so
multi pin support doesn't work at all.
This patch enables the software combine mode in chips that support
it. With this the SAI presents only a single FIFO to the outside
and distributes the data into the different FIFOs internally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220111081518.982437-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement snd_compress_ops. There are a lot of similarities with
PCM implementation.
For now we use sof_ipc_pcm_params to transfer compress parameters to SOF
firmware.
This will be changed in the future once we either add new compress
parameters to SOF or enhance existing sof_ipc_pcm_params structure
to support all native compress params.
Note that get_caps and get_codec_caps are missing and will be added
later. This is because we need to find a way to advertise DSP
capabilities depending on supported platforms.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220120143741.492634-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of passing a pointer to the stream_tag within the
struct sof_ipc_dma_trace_params_ext, pass the pointer to the containing
struct.
AMD needs to update buffer.phy_addr (and don't really use the stream_tag)
for the trace implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the snd_dma_buffer pointer as parameter to hda_dsp_trace_prepare()
function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The simple-mux driver requires gpiolib. Currently it selects GPIOLIB but
since the use of select can lead to issues with randconfig let's instead
depend on GPIOLIB, select is more idiomatically used for Kconfig symbols
that are not user selectable but GPIOLIB is user selectable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The current rt5682_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.
This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.
Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current rt5668_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.
This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.
Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current rt5682s_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.
This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.
Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220204095301.5554-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable c is being initialized in an outer for-loop and also
re-initialized inside an inner for-loop. The first initialization
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220207140617.341172-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Samuel Holland <samuel@sholland.org>:
This series extends the sun4i-i2s binding and driver to support some
newer versions of the hardware. Each instance of the hardwar now has
multiple input/output pins, and channels can be muxed between them.
Since so far the driver only supports a "default" linear channel map,
the driver changes are minimal.
Samuel Holland (3):
ASoC: dt-bindings: sun4i-i2s: Add compatibles for R329 and D1
ASoC: sun4i-i2s: Update registers for more channels
ASoC: sun4i-i2s: Add support for the R329/D1 variant
.../sound/allwinner,sun4i-a10-i2s.yaml | 5 ++
sound/soc/sunxi/sun4i-i2s.c | 68 +++++++++++++++----
2 files changed, 59 insertions(+), 14 deletions(-)
--
2.33.1
The Madera CODECs use regmap_irq functions but nothing ensures that
regmap_irq is built into the kernel. Add dependencies on the ASoC
symbols for the relevant MFD component. There is no point in building
the ASoC driver if the MFD doesn't support it and the MFD part contains
the necessary dependencies to ensure everything is built into the
kernel.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220203115025.16464-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
midas_wm811 uses gpiolib but relies on the header being implicitly included
which can lead to build failures in some configurations, explicitly pull
the header in to avoid problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220202191322.3650708-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DMIC_ENA bit is set the analogue inputs are disconnected from
the digital core of the chip, in favour of the digital microphones.
Currently the driver will always enable DMIC_ENA whilst the GPIOs are
configured for the DMIC function, this means the user can't currently
use both the analog inputs and the digital inputs in one system.
Add an additional DAPM mutex that allows switching between analog and
digital inputs into the digital core.
Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reported-and-tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/20220202164545.30457-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a new set of quirks to set the right RX channel map. Since
that is the only change to the register layout, reuse the H6 regmap
config by extending its last register. R329 support is added by its
compatible string. D1 uses R329 as its fallback compatible, so no
additional code change is needed for it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203020116.12279-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
H6 expands the number of channels in each direction to 16, so the slot
number fields need to be expanded from 3 to 4 bits each.
R329/D1 expand that further by allowing each of the 16 slots to map to
any of 4 data pins. For TX, the configuration of each pin is
independent, so there is a copy of the mapping registers for each pin.
For RX, each of the 16 slots can map to only one pin, so the registers
were changed to add the pin selection inline with the channel mapping.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203020116.12279-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The event generation coverage I just wrote shows that the generic ASoC
ops fail to generate events for stereo controls when only the first
channel is changed, we just return the status for the second channel and
discard that for the first.
Add support for two and four CS35L41 using the component
binding method
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220121172431.6876-9-sbinding@opensource.cirrus.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maxim codec driver already enabling/disabling spk_en_gpio in form of sd_mode gpio
hence remove such gpio access control from machine driver to avoid conflict
Signed-off-by: V sujith kumar Reddy <vsujithkumar.reddy@amd.com>
Link: https://lore.kernel.org/r/20220131203225.1418648-1-vsujithkumar.reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Quite a few fixes here, including an unusually large set in the core
spurred on by various testing efforts as well as the usual small driver
fixes. There are quite a few fixes for out of bounds writes in both the
core and the various Qualcomm drivers, plus a couple of fixes for
locking in the DPCM code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmH5Vi4ACgkQJNaLcl1U
h9Ah6gf/SdlpKMKgAYiXAfmhb/88UgWkXWwHYgK+uHQXy3VpiG3zOso2uHQTbZ0X
+QMZ1LwPbcSsz6Ny/w/kQ4MKeklHou0X6GiQ6PRoDukBPQ6yidivwnVXt35qNBwT
iYmMuLpWsq0CrbUp9cPX+zurX+jUv/CKuwG1JnHxS2+lQ7UjetUOfKzO80X4zUA5
tm12soU9PSUcSyBICg5Jn+Tt9ZPccJ4cDPLfdRVkKjwb+6o4CnuM56Jq9UeHY6KT
SGr8/Jt0I61p8UHPUpqJsj2ItHhy80bNraSaNptQljlIYCPidgFlPKyXxgunm8e5
Z2PUG2mOIR4pk0cj1SxOXwhH9+d3dQ==
=UdmQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.17-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.17
Quite a few fixes here, including an unusually large set in the core
spurred on by various testing efforts as well as the usual small driver
fixes. There are quite a few fixes for out of bounds writes in both the
core and the various Qualcomm drivers, plus a couple of fixes for
locking in the DPCM code.
If the codec->registered is not set then it means that pm_runtime is
not yet enabled and the codec->pcm_list_head has not been initialized.
The access to the not initialized pcm_list_head will lead a kernel crash
during shutdown.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Fixes: b98444ed59 ("ALSA: hda: Suspend codec at shutdown")
Link: https://lore.kernel.org/r/20220201112144.29411-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device provides both audio and video. The original quirk added in
commit 48827e1d6a ("ALSA: usb-audio: Add quirk for VF0770") used
USB_DEVICE to match the vendor and product ID. Depending on module order,
if snd-usb-audio was asked first, it would match the entire device and
uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE
to restore uvcvideo matching in all cases.
Fixes: 48827e1d6a ("ALSA: usb-audio: Add quirk for VF0770")
Reported-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Tested-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Reported-by: Paweł Susicki <pawel.susicki@gmail.com>
Tested-by: Paweł Susicki <pawel.susicki@gmail.com>
Cc: <stable@vger.kernel.org> # 5.4, 5.10, 5.14, 5.15
Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Link: https://lore.kernel.org/r/20220131183516.61191-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2828205.e9J7NaK4W3@kreacher
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a header file that provides the missing function prototypes
and macro to fix these build errors (seen on arch/alpha/):
../sound/soc/codecs/max98927.c: In function 'max98927_i2c_probe':
../sound/soc/codecs/max98927.c:902:19: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
902 | = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_HIGH);
| ^~~~~~~~~~~~~~~~~~~~~~~
../sound/soc/codecs/max98927.c:902:63: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
902 | = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_HIGH);
| ^~~~~~~~~~~~~~
../sound/soc/codecs/max98927.c:909:17: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
909 | gpiod_set_value_cansleep(max98927->reset_gpio, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4d67dc1998 ("ASoC: max98927: Handle reset gpio when probing i2c")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alejandro Tafalla <atafalla@dnyon.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20220129080259.19964-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS GU603 (Zephyrus M16 - SSID 1043:16b2) requires a quirk similar to
other ASUS devices for correctly routing the 4 integrated speakers. This
fixes it by adding a corresponding quirk entry, which connects the bass
speakers to the proper DAC.
Signed-off-by: Albert Geantă <albertgeanta@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220131010523.546386-1-albertgeanta@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Newer versions of the X570 Master come with a newer revision of the
mainboard chipset - the X570S. These boards have the same ALC1220 codec
but seem to initialize the codec with a different parameter in Coef 0x7
which causes the output audio to be very low. We therefore write a
known-good value to Coef 0x7 to fix that. As the value is the exact same
as on the other X570(non-S) boards the same quirk-function can be shared
between both generations.
This commit adds the Gigabyte X570S Aorus Master to the list of boards
using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output
and the no-audio after reboot from windows problems.
This work has been tested by the folks over at the level1techs forum here:
https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-3-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the
fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill
effects but for completeness sake this commit makes up for that.
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The COEF access is done with two steps: setting the index then read or
write the data. When multiple COEF accesses are performed
concurrently, the index and data might be paired unexpectedly.
In most cases, this isn't a big problem as the COEF setup is done at
the initialization, but some dynamic changes like the mute LED may hit
such a race.
For avoiding the racy COEF accesses, this patch introduces a new
mutex coef_mutex to alc_spec, and wrap the COEF accessing functions
with it.
Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain
Link: https://lore.kernel.org/r/20220131075738.24323-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The controls allow inputs to be specified as negative but our manipulating
them into register fields need to be done on unsigned variables so the
checks for negative numbers weren't taking effect properly. Do the checks
for negative values on the variable in the ABI struct rather than on our
local unsigned copy.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220128192443.3504823-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The series will drop the internal use of 'header' parameter which is always
set to hdr->cmd.
The other simplification is to use the provided message directly as it is
guarantied to be valid throughout the message sending and we can save memory
by not allocating a temporary buffer, also saving on needles memcpy()
operations.
Merge series from Brian Norris <briannorris@chromium.org>:
This series fixes DP/HDMI audio for RK3399 Gru systems.
First, there was a regression with the switch to SPDIF. Patch 1 can be
taken separately as a regression fix if desired. But it's not quite so
useful (at least on Chrome OS systems) without the second part.
Second, jack detection was never upstreamed, because the hdmi-codec
dependencies were still being worked out when this platform was first
supported.
base-commit: e783362eb5
Merge series from Takashi Iwai <tiwai@suse.de>:
This is the revised patches for addressing ASoC lockdep warnings due
to the recent DPCM locking refactoring.
When disabling a regulator fails while the device goes away, there is
little we can do and the machine is probably in enough trouble that any
action we'd want to take fails anyhow.
The return value used to be passed on in cs42l51_i2c_remove() (i.e. the
i2c device remove callback). But the i2c core ignores the error code
(apart from emitting a generic warning) and removes the device anyhow.
So return 0 unconditionally in cs42l51_i2c_remove(), and instead of
returning the error code to the upper layer emit a more helpful warning
message. After that nobody is interested any more in the actual error
code, so let cs42l51_remove() return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220110071832.306185-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc_tx_message does not have support for async operations.
There is no need to allocate a buffer and copy each message to it to be
sent to the DSP, we can use the passed message data pointer directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220128133620.9411-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_ipc_msg.header is not used by platform code, there is no need
to update it and the 'header' parameter for sof_ipc_tx_message_unlocked()
can be dropped at the same time.
Instead of using the header parameter passed by the caller (which does by
setting it to the hdr->cmd) use the hdr->cmd directly when logging.
At the same time make sure that there is a message passed to the tx_message
function.
All instances of the tx_message passes an IPC message, this check is placed
to make sure the future users can not introduce bugs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220128133620.9411-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of first checking the msg->header (which is the hdr.cmd), use
directly the cmd from the message itself.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220128133620.9411-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have SOF and generic ACP support enabled for Renoir platforms
on some machines. Since we have same PCI id used for probing, add
check for machine configuration flag to avoid conflict with newer
pci drivers. Such machine flag has been initialized via dmi match
on few Chrome machines. If no flag is specified probe and register
older platform device.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220117115854.455995-7-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP hardware has PGFSM control registers that can be configured to
power On/Off the ACP IP block. Add acp init()/de_init() callbacks
in renoir platform driver probe()/remove() respectively to power
on and off ACP IP block on ACP3X device.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220117115854.455995-5-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Co-processor or ACP IP block on AMD's SOC is connected via
PCI bus interface, hence needs to be register as a PCI device. We
have same PCI device ID across multiple SOC's but with different
revision id for PCI hw. Add a generic PCI driver module for ACP
that registers ACP as a PCI device and also register a platform
device based on pci revision id. Any SOC's specific configuration
for ACP block will be done in platform driver probe. We have added
an initial support for ACP revision id 3 or ACP3X device.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220117115854.455995-4-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renoir ACP IP has a PDM controller block. Add DMIC dai instance in
dai_driver struct to enable dmic capture support on Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220117115854.455995-3-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add driver module for PDM controller on ACP IP block. Expose dai
ops to configure ACP_WOV_PDM_BLOCK registers on ACP. Such dai ops
will be used by platform specific driver module to register dmic
related dai with ASoC.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220117115854.455995-2-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On resume from suspend the following chain of events can happen:
A rt5682_resume() -> mod_delayed_work() for jack_detect_work
B DAPM sequence starts ( DAPM is locked now)
A1. rt5682_jack_detect_handler() scheduled
- Takes both jdet_mutex and calibrate_mutex
- Calls in to rt5682_headset_detect() which tries to take DAPM lock, it
starts to wait for it as B path took it already.
B1. DAPM sequence reaches the "HP Amp", rt5682_hp_event() tries to take
the jdet_mutex, but it is locked in A1, so it waits.
Deadlock.
To solve the deadlock, drop the jdet_mutex, use the jack_detect_work to do
the jack removal handling, move the dapm lock up one level to protect the
most of the rt5682_jack_detect_handler(), but not the jack reporting as it
might trigger a DAPM sequence.
The rt5682_headset_detect() can be changed to static as well.
Fixes: 8deb34a90f ("ASoC: rt5682: fix the wrong jack type detected")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220126100325.16513-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct size of iec_status array by changing it to the size of status
array of the struct snd_aes_iec958. This fixes out-of-bounds slab
read accesses made by memcpy() of the hdmi-codec driver. This problem
is reported by KASAN.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20220112195039.1329-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent fix for DPCM locking also covered the loop in
dpcm_be_disconnect() with the FE stream lock. This caused an
unexpected side effect, thought: calling debugfs_remove_recursive() in
the spinlock may lead to lockdep splats as the code there assumes the
SOFTIRQ-safe context.
For avoiding the problem, this patch changes the disconnection
procedure to two phases: at first, the matching entries are removed
from the linked list, then the resources are freed outside the lock.
Fixes: b7898396f4 ("ASoC: soc-pcm: Fix and cleanup DPCM locking")
Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220119155249.26754-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent change for DPCM locking caused spurious lockdep warnings.
Actually the warnings are false-positive, as those are triggered due
to the nested stream locks for FE and BE. Since both locks belong to
the same lock class, lockdep sees it as if a deadlock.
For fixing this, we need to take PCM stream locks for BE with the
nested lock primitives. Since currently snd_pcm_stream_lock*() helper
assumes only the top-level single locking, a new helper function
snd_pcm_stream_lock_irqsave_nested() is defined for a single-depth
nested lock, which is now used in the BE DAI trigger that is always
performed inside a FE stream lock.
Fixes: b2ae806630 ("ASoC: soc-pcm: serialize BE triggers")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/73018f3c-9769-72ea-0325-b3f8e2381e30@redhat.com
Link: https://lore.kernel.org/alsa-devel/9a0abddd-49e9-872d-2f00-a1697340f786@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220119155249.26754-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The first count check and fixup against "buffer - lpos" can be removed as
we will do the adjustment later against the "avail" in
sof_dfsentry_trace_read()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128120627.18443-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The limitation to assign a link DMA channel for a BE iff the
corresponding host DMA channel is assigned to a connected FE is only
applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms
that do not enable the quirk.
Complements: a792bfc1c2 ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220128130017.28508-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The register offsets of switches connecting various AHUB internal
modules have changed from previous chip. Address this variation by
making use of Tegra234 based compatible.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1643373476-8538-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing platform_device_put() and platform_device_del()
before return from pcm030_fabric_probe in the error handling case.
Fixes: c912fa9134 ("ASoC: fsl: register the wm9712-codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The %x format of sscanf() takes an unsigned int pointer, while we pass
a signed int pointer. Practically it's OK, but this may result in a
compile warning. Let's fix it.
Fixes: a235d5b8e5 ("ALSA: hda: Allow model option to specify PCI SSID alias")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220127135717.31751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang static analysis reports this representative issue
mixer.c:1548:35: warning: Assigned value is garbage or undefined
ucontrol->value.integer.value[0] = val;
^ ~~~
The filter_error() macro allows errors to be ignored.
If errors can be ignored, initialize variables
so garbage will not be used.
Fixes: 48cc429735 ("ALSA: usb-audio: Filter error from connector kctl ops, too")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220126182142.1184819-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LED class devices that are created by HD-audio codec drivers are
registered via devm_led_classdev_register() and associated with the
HD-audio codec device. Unfortunately, it turned out that the devres
release doesn't work for this case; namely, since the codec resource
release happens before the devm call chain, it triggers a NULL
dereference or a UAF for a stale set_brightness_delay callback.
For fixing the bug, this patch changes the LED class device register
and unregister in a manual manner without devres, keeping the
instances in hda_gen_spec.
Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain
Link: https://lore.kernel.org/r/20220126145011.16728-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Its possible that the sound card is just opened and closed without actually
playing stream, ex: if the audio file itself is missing.
Even in such cases we do call stop on graphs that are not yet started.
DSP can throw errors in such cases, so add a check to see if the graph
was started before stopping it.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd938x_ear_pa_put_gain, wcd938x_set_swr_port and wcd938x_set_compander
currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up with incorrect register offfset calcuations
for sidetone. regmap clearly throw errors when accessing these incorrect
registers as these do not belong to any read/write ranges.
so fix them to point to correct register offsets.
Fixes: f3ce6f3c9a ("ASoC: codecs: lpass-rx-macro: add iir widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
sound/usb/mixer_scarlett_gen2.c:1064:28: warning: using sizeof on a flexible structure
sound/usb/mixer_scarlett_gen2.c:1065:29: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220120211600.GA28841@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A copy of substream pointer is stored in priv structure during
rz_ssi_dai_trigger() callback ie in SNDRV_PCM_TRIGGER_START case
and the pointer is assigned to NULL in case of SNDRV_PCM_TRIGGER_STOP.
The driver used the locks only in rz_ssi_stream_is_valid() and assigned
the local substream pointer to NULL in rz_ssi_dai_trigger() callback but
never locked it while making a local copy.
This patch adds the rz_ssi_set_substream() helper function to set the
substream pointer with locks acquired and replaces the instances of
setting the local substream pointer with the rz_ssi_set_substream()
function.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220125132457.14984-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a do-while loop while reading the samples from RX FIFO. The "done"
flag was only changed as an outcome of the last if-statement (last step)
in this entire procedure. This patch moves the condition from if
statement to while and drops the "done" variable for readability.
While at it, also drop the unneeded parentheses around runtime->dma_area.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220125132457.14984-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add support for platforms without amplifier (headset codec only) and
without Intel graphics.
Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:
This pair of patches implements support for the TAS5805M class D audio
amplifier. This driver, and the example configuration in the device-tree
file, were originally based on a 4.19 series kernel and have been
modified slightly from the tested version.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Add system suspend and resume handlers so that the cs42l42 is cleanly
put into power-off state during system suspend and the registers are
restored in resume.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Make sure the device version is taken into account when selecting a
machine driver, in addition to device manufacturer and part_id, and
simplify code with a macro.
Merge series from Ariel D'Alessandro <ariel.dalessandro@collabora.com>:
Sound cards may allow using different main clock inputs. In the generic
fsl-asoc-card driver, these values are hardcoded for each specific card
configuration. Let's make it more flexible, allowing setting mclk-id
from the device-tree node.
Merge series from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>:
Hi All,
This patch series does code cleanup and fixes to the rz-ssi driver.
Cheers,
Prabhakar
Lad Prabhakar (5):
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
ASoC: sh: rz-ssi: Make the data structures available before
registering the handlers
ASoC: sh: rz-ssi: Drop ssi parameter from rz_ssi_stream_init()
ASoC: sh: rz-ssi: Make return type of rz_ssi_stream_is_valid() to bool
ASoC: sh: rz-ssi: Add functions to get/set substream pointer
sound/soc/sh/rz-ssi.c | 147 ++++++++++++++++++++++++------------------
1 file changed, 86 insertions(+), 61 deletions(-)
--
2.17.1
Merge series from Robert Hancock <robert.hancock@calian.com>:
There are drivers in mainline for the Xilinx Audio Formatter and Xilinx
I2S IP cores. However, because of a few issues, these were only really
usable with Xilinx's xlnx_pl_snd_card top-level driver, which is not in
mainline (and not suitable for mainline).
The fixes in this patchset, for the simple-card layer as well as the
Xilinx drivers, now allow these drivers to be properly used with
simple-card without any out-of-tree support code.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
After the first firmware boot, the firmware is capable of
saving/restoring its context to/from IMR (Isolated Memory Region, set
aside by BIOS on startup). This capability improves the resume speed.
Due to an unexplained issue on Up2 boards, this capability is disabled
on ApolloLake.
For backwards compatibility, the regular boot flow is used with older
firmware. For added peace of mind, a kernel module parameter is
provided to force the regular boot flow - this shouldn't be necessary
since we've been testing these patches for 6+ months.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Following series performs few cleanups in topology code.
First patch reduces number of prints we get from failure.
Second allos TLV controls to be either read or write which should be
possible as evidenced by further code in function.
Last one cleanups after refactoring of memory handling.
v2:
- Add missing Fixes tag on second patch
- Add Reviewed-by tag from Pierre
Amadeusz Sławiński (3):
ASoC: topology: Remove superfluous error prints
ASoC: topology: Allow TLV control to be either read or write
ASoC: topology: Optimize soc_tplg_dapm_graph_elems_load behavior
sound/soc/soc-topology.c | 103 ++++++++++-----------------------------
1 file changed, 27 insertions(+), 76 deletions(-)
--
2.25.1
Add a new system-clock-fixed flag, which can be used to specify that the
driver cannot or should not allow the clock frequency of the mapped clock
to be modified. This behavior is also implied if the system-clock-frequency
parameter is set explicitly - the flag is meant for cases where a clock is
mapped to the DAI but which is, or should be treated as, fixed.
When mclk-fs is also specified, this causes a PCM constraint to be added
which enforces that only the corresponding valid sample rate can be used.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-7-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an mclk-fs value was provided in the device tree configuration, the
calculated MCLK was fed into the downstream codec DAI and CPU DAI,
however set_sysclk was not being called on the platform device. Some
platform devices such as the Xilinx Audio Formatter need to know the MCLK
as well.
Call snd_soc_component_set_sysclk on each component in the stream to set
the proper sysclk value in addition to the existing call of
snd_soc_dai_set_sysclk on the codec DAI and CPU DAI. This may end up
resulting in redundant calls if one of the snd_soc_dai_set_sysclk calls
ends up calling snd_soc_component_set_sysclk itself, but that isn't
expected to cause any significant harm.
Fixes: f48dcbb6d4 ("ASoC: simple-card-utils: share asoc_simple_hw_param()")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-5-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver previously only handled the set_clkdiv divider callback when
setting the SCLK Out Divider field in the I2S Timing Control register.
However, when using the simple-audio-card driver, the set_sysclk function
is called but not set_clkdiv. This caused the divider not to be set,
leaving it at an invalid value of 0 and resulting in a very low SCLK
output rate.
Handle set_clkdiv and store the sysclk (MCLK) value for later use in
hw_params to set the SCLK Out Divider such that:
MCLK/SCLK = divider * 2
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-4-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An upcoming change will require storing additional driver data other
than the memory base address. Create a drvdata structure and use that
rather than storing the raw base address pointer.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-3-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver did not set the MM2S Fs Multiplier Register to the proper
value for playback streams. This needs to be set to the sample rate to
MCLK multiplier, or random stream underflows can occur on the downstream
I2S transmitter.
Store the sysclk value provided via the set_sysclk callback and use that
in conjunction with the sample rate in the hw_params callback to calculate
the proper value to set for this register.
Fixes: 6f6c3c36f0 ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the potential failure of the devm_regmap_init_mmio(), it will
return error pointer and be assigned to the regmap.
Then the error pointer will be dereferenced.
For example rx->regmap will be used in rx_macro_mclk_enable().
Therefore, it should be better to check it.
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: 809bcbcece ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220121171031.2826198-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
codec system clock source support 512FS MCLK synchronous directly, so
no need to set PLL configuration when MCLK 24.576MHz.
Suggested-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120054012.15849-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have new platform with rt5682s as a primary codec and rt1019 as an
amp codec. Add machine struct to register sof audio based sound card
on such Chrome machine.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <vsujithkumar.reddy@amd.com>
Link: https://lore.kernel.org/r/20220122194707.2661026-1-vsujithkumar.reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The config->pcm_hardware may be NULL when config->prealloc_buffer_size
is not zero, so it is better to move max_buffer_size assignment under
a separate condition.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1642646642-15908-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return value from io_remap_pfn_range() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Link: https://lore.kernel.org/r/20220117110357.863990-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Return value from devm_snd_soc_register_component() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220110012833.643994-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Let's use a more generic name, so other definitions for tlv320aic31xx
can be included.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220117132109.283365-2-ariel.dalessandro@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that fsl-asoc-card support setting mclk-id through the device-tree
mclk-id property, let's remove the default BCLK configuration for this
card.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220117132109.283365-6-ariel.dalessandro@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sound cards may allow using different main clock inputs. In the generic
fsl-asoc-card driver, these values are hardcoded for each specific card
configuration.
Let's make it more flexible, allowing setting mclk-id from the
device-tree node. Otherwise, the default value for each card
configuration is used.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220117132109.283365-5-ariel.dalessandro@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a board config adl_rt5682 to support alc5682 headset codec without
speaker amplifier. Follow Intel BT offload design by connecting
alc5682 to SSP0.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120230226.175906-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to systems where iDisp HDMI/DP audio codec is disabled for some
reason, switch codecs to SoC dummy in the affected DAI links. This allows
to reuse existing topologies as hdmi_num is 3 by default.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120230226.175906-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can exclude the sdw unique id and compare the sdw adr directly when
we are finding out identical parts.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120232157.199919-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codecs with the same part id, manufacturer id and part id, but different
sdw version should be treated as different codecs. For example, rt711 and
rt711-sdca are different. So, we should match sdw version as well.
Reported-by: Reddy Muralidhar <muralidhar.reddy@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120232157.199919-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add system suspend functions to handle clean power-down on suspend and
restoring registers on resume.
The jack state could change during suspend. Plug->unplug and unplug->plug
are straightforward because this looks no different from any other plug
state change - there will be a plugged or unplugged interrupt pending.
The jack could be unplugged and a different type of jack plugged, and on
resume the plug state would not have changed. Setting plug_state back to
TS_TRANS (transitioning) will make the next plug interrupt after resume
run a type detection.
During system suspend any jack plug/unplug and button events will not be
reported or generate a system wakeup. If the plug state or headset type
has changed it will be reported after resume.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121120412.672284-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename jack_detect_mutex to irq_lock and make it lock the entire IRQ
handling.
The jack_detect_mutex was introduced to synchronize registering an
ALSA jack handler, via cs42l42_set_jack(), with the jack state
processing in the IRQ handler, and was taken only around the
relevant part of the IRQ handling code.
System suspend will need to synchronize with the IRQ handler thread
so will need a similar mutex that surrounds all of the IRQ handling.
Repurposing the existing jack_detect_mutex is the simplest option.
It does no harm for a call to cs42l42_set_jack() to additionally
block the first few lines of IRQ handling, and the only interrupts
used by the driver are all for jack handling.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121120412.672284-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a plug event is detect report the full state of all status
bits, don't assume that there will have been a previous unplug
event to clear all the bits. Report the state of both HEADPHONE
and MICROPHONE bits according to detected type, and clear all the
button status bits. The current button status is already checked
and reported at the end of the function.
During a system suspend the jack could be unplugged and plugged,
possibly changing the jack type. On resume the interrupt status will
indicate a plug event - there will not be an unplug event to clear
the bits.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121120412.672284-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rz_ssi_stream_is_valid() never returns an int, it returns the result of
a condition which is either true or false.
While at it, drop "!!" as the expression is boolean.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110094711.8574-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ssi parameter is unused in rz_ssi_stream_init() so just drop it.
While at it, change the return type of rz_ssi_stream_init() to void
instead of int.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110094711.8574-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize the spinlock and make the data structures available before
registering the interrupt handlers.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110094711.8574-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of recursively calling rz_ssi_pio_recv() use a while loop
to read the samples from RX fifo.
This also fixes an issue where the return value of rz_ssi_pio_recv()
was ignored when called recursively.
Fixes: 03e786bd43 ("ASoC: sh: Add RZ/G2L SSIF-2 driver")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110094711.8574-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Texas Instruments TAS5805M is a class D audio amplifier with an
integrated DSP. DSP configuration is supplied in a firmware image
specified through a device-tree attribute.
These register writes set up application-specific DSP settings and are
expected to be generated using TI's PPC3 tool.
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/b82fac1d21a33a5f57a5819eaf37c31f5c86eb65.1642298336.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before commit "ASoC: topology: Change allocations to resource managed"
soc_tplg_dapm_graph_elems_load() used to free routes on error. During
migration to managed allocations the routes table was left as is, but
looking at it again it is unnecessary, so remove routes table and just
keep pointer to DAPM route currently being set up. Also remove outdated
comments which keep describing old behavior of remove_route() freeing
memory. While it still does some cleanup, it leaves freeing memory to
framework.
Fixes: ff92262244 ("ASoC: topology: Change allocations to resource managed")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to force readwrite access on TLV controls. It can be
either read, write or both. This is further evidenced in code where it
performs following checks:
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ) && !sbe->get)
return -EINVAL;
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) && !sbe->put)
return -EINVAL;
Fixes: 1a3232d2f6 ("ASoC: topology: Add support for TLV bytes controls")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_tplg_check_elem_count(), already prints an error when applicable, so
there is no need to print another one.
Also clean up alignment of arguments in if, so there is no confusion
about what is checked and what is executed if condition is true.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220112170030.569712-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag _IGNORE_D3_PERSISTENT to disable IMR restore feature to
the sof_debug module parameter.
The IMR restore feature will be enabled for all Intel cAVS platforms by
default, but setting the flag _IGNORE_D3_PERSISTENT can help to disable
the feature for debug purpose, to rule out any possible regression
introduced by the change of not re-downloading firmware to the DSP at
resuming from suspended state.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the firmware declares the IMR restore feature, we only need to do a
simple powering up to resume from D3, no firmware re-downloading
needed - the context is saved/restored to/from IMR without needing
driver support.
Add a hda_dsp_boot_imr() helper for this simple DSP reboot, and use it
when it is available.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the SSP clock configuration to the hda_set_ssp_cbp_cfp() helper,
to be used in follow-up patches
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We introduced provider/consumer terms, and CBP_CFP acronyms for codec
drivers, let's use them as well in SOF.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120231532.196926-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove PDE_DATA() completely and replace it with pde_data().
[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]
Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're setting wrong card codec conf for rt1019 amp devices in our
machine driver. Due to this left and right amp channels data are
reversed in our machines as wrong device prefix results in wrong
value for "Mono LR Select" rt1019 mixer control. Reverse dev ids
in codec conf with Left and Right name_prefix to fix such issue.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220120133605.476138-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small set of HD-audio and USB-audio fixes as well as a couple of
ALSA core fixes. Most of them are fix-ups for the newly added
CS35L41 codec.
-----BEGIN PGP SIGNATURE-----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=/I0h
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small set of HD-audio and USB-audio fixes as well as a couple of
ALSA core fixes. Most of them are fix-ups for the newly added CS35L41
codec"
* tag 'sound-fix-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cs8409: Add new Warlock SKUs to patch_cs8409
ALSA: core: Simplify snd_power_ref_and_wait() with the standard macro
ALSA: hda: cs35l41: Make cs35l41_hda_remove() return void
ALSA: hda: cs35l41: Tidyup code
ALSA: hda: cs35l41: Make use of the helper function dev_err_probe()
ALSA: hda: cs35l41: Add missing default cases
ALSA: hda: cs35l41: Move cs35l41* calls to its own symbol namespace
ALSA: hda: cs35l41: Add calls to newly added test key function
ALSA: hda: cs35l41: Avoid overwriting register patch
ALSA: core: Fix SSID quirk lookup for subvendor=0
ALSA: usb-audio: add mapping for MSI MPG X570S Carbon Max Wifi.
ALSA: hda/realtek: fix speakers and micmute on HP 855 G8
When SND_SOC_MT8195_MT6359_RT1011_RT5682 is selected,
and GPIOLIB is not selected,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for SND_SOC_DMIC
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_MT8195_MT6359_RT1011_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8195 [=y] && MTK_PMIC_WRAP [=y]
This is because SND_SOC_MT8195_MT6359_RT1011_RT5682
selects SND_SOC_DMIC without selecting or depending on
GPIOLIB, depsite SND_SOC_DMIC depending on GPIOLIB.
This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20220117050324.68371-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put()
Fixes: fa8d915172 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Use wait_event_cmd() macro and simplify snd_power_ref_wait()
implementation. This may also cover possible races in the current
open code, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220119091050.30125-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Up to now cs35l41_hda_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117220055.120955-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-5-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The test key now needs to be manually held when calling
cs35l41_register_errata_patch, after patch:
Add the missing function calls to this driver.
Fixes: f517ba4924 ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-2-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
regmap_register_patch can't be used to apply the probe sequence as a
patch is already registers with the regmap by
cs35l41_register_errata_patch and only a single patch can be attached to
a single regmap. The driver doesn't currently rely on a cache sync to
re-apply this probe sequence so simply switch it to a multi write.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-1-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
partial support for < MAX_ORDER - 1 granularity for virtio-mem
driver_override for vdpa
sysfs ABI documentation for vdpa
multiqueue config support for mlx5 vdpa
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
=Y1eO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
Some weird devices set the codec SSID vendor ID 0, and
snd_pci_quirk_lookup_id() loop aborts at the point although it should
still try matching with the SSID device ID. This resulted in a
missing quirk for some old Macs.
Fix the loop termination condition to check both subvendor and
subdevice.
Fixes: 73355ddd87 ("ALSA: hda: Code refactoring snd_hda_pick_fixup()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495
Link: https://lore.kernel.org/r/20220116082838.19382-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The USB audio device 0db0:419c based on the Realtek ALC4080 chip exposes
all playback volume controls as "PCM". This is makes distinguishing the
individual functions hard.
The added mapping distinguishes all playback volume controls as their
respective function:
- Speaker - for back panel output
- Frontpanel Headphone - for front panel output
- IEC958 - for digital output on the back panel
This clarifies the individual volume control functions for users.
Signed-off-by: Johannes Schickel <lordhoto@gmail.com>
Link: https://lore.kernel.org/r/20220115140257.8751-1-lordhoto@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are several PCI ids associated with HP EliteBook 855 G8 Notebook
PC. Commit 0e68c4b11f ("ALSA: hda/realtek: fix mute/micmute LEDs for
HP 855 G8") covers 0x103c:0x8896, while this commit covers 0x103c:0x8895
which needs some additional work on top of the quirk from 0e68c4b11f.
Note that the device can boot up with working speakers and micmute LED
without this patch, but the success rate would be quite low (order of
16 working boots across 709 boots) at least for the built-in drivers
scenario. This also means that there are some timing issues during early
boot and this patch is a workaround.
With this patch applied speakers and headphones are consistenly working,
as well as mute/micmute LEDs and the internal microphone.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220114165050.ouw2nknuspclynro@localhost.localdomain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
* ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
* ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
* HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
* Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1.
-----BEGIN PGP SIGNATURE-----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=csTR
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
Entries without dmi_table nor codec_hid field need to be placed after
entries with these two fields or they will be always selected.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220113105220.1114694-3-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add rules to select SOF driver for Jasper Lake systems if digital
microphone is present or the system is a Chromebook.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220113105220.1114694-2-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.
Fixes: f6cdf2d344 ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
If we encounter an error after the kfree(acpi_hw_cfg); then the goto
err; will result in a double free.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220111072232.GG11243@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.
Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.
Fixes: f107294c64 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make
buffer bytes multiple of period bytes" by Devarsh Thakkar. The same
issue exists in the mainline version of the driver. The original
patch description is as follows:
"The Xilinx Audio Formatter IP has a constraint on period
bytes to be multiple of 64. This leads to driver changing
the period size to suitable frames such that period bytes
are multiple of 64.
Now since period bytes and period size are updated but not
the buffer bytes, this may make the buffer bytes unaligned
and not multiple of period bytes.
When this happens we hear popping noise as while DMA is being
done the buffer bytes are not enough to complete DMA access
for last period of frame within the application buffer boundary.
To avoid this, align buffer bytes too as multiple of 64, and
set another constraint to always enforce number of periods as
integer. Now since, there is already a rule in alsa core
to enforce Buffer size = Number of Periods * Period Size
this automatically aligns buffer bytes as multiple of period
bytes."
Fixes: 6f6c3c36f0 ("ASoC: xlnx: add pcm formatter platform driver")
Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few more updates for v5.17, nothing hugely stand out in the few days
since the initial pull request was sent.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmHcKrQACgkQJNaLcl1U
h9CLHgf/eA8SDvjL0PzrGiNusrSKhNd0hDrDyrOGGKLjxEvauIr5WGRIgG3F9Frs
wQiyC7tJBJZ3kQ7WTkXbqY53cwO4QYDyQj9k/Knx/MouPSNcEfgHB+UWxOi8A9ON
5ySGN2PJTgqtGfBQdtQFvzNqs6kOzf83rl52ovTgvROmhJwnOV1iT2Oge5ynZeFM
jC/Dhs/DXy3V09LY2OcWAcv4/QGek7pblj5OS0/3yvFeMsjIuU3LhO+8lUptAtmw
eTbOoOXUdci5HVgSDw5O9cBlv+OS4Zk4VdXF4KvQ2Cp/Hlj3xdm2dSRyjBdYMGXb
X+L9BeJpFjEnv57zrzXcoycVjNHKCQ==
=iAwF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.17
A few more updates for v5.17, nothing hugely stand out in the few days
since the initial pull request was sent.
CS35L41 SPI and I2C drivers depend on those buses, hence they have to
have dependencies in Kconfig; otherwise it may result in missing
symbols.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220109081337.30623-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently added support for CS35L41 codec unconditionally selects
CONFIG_SND_SOC_CS35L41_LIB, but this can't work unless the top-level
CONFIG_SND_SOC is enabled. This patch adds the proper dependency.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Link: https://lore.kernel.org/r/20220107092647.20258-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs35l41 supports a low power DSP memory retention mode. Add support
for entering this mode when then device is not in use.
Co-authored-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for the addition of PM runtime support move the test
key out of the register patches themselves. This is necessary to
allow the test key to be held during cache synchronisation, which is
required by the OTP settings which were unpacked from the device and
written by the driver.
Also whilst at it, the driver uses a mixture of accessing the test key
register by name and by address, consistently use the name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To maintain the consistency of the code, it should be better to add the
sanity check after calling dma_set_mask_and_coherent(), like
tegra_pcm_dma_allocate() in `sound/soc/tegra/tegra_pcm.c`.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220107020851.3095591-1-jiasheng@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, rx_port_value is a single unsigned int that gets overwritten
when slim_rx_mux_put() is called for any RX mux, then the same value is
read when slim_rx_mux_get() is called for any of them. This results in
slim_rx_mux_get() reporting the last value set by slim_rx_mux_put()
regardless of which SLIM RX mux is in question.
Turn rx_port_value into an array and store a separate value for each
SLIM RX mux.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220104033356.343685-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT1019 components was initially registered with i2c1 and i2c2 but
now changed to i2c0 and i2c1 in most of our AMD platforms. Change
default rt1019 components to 10EC1019:00 and 10EC1019:01 which is
aligned with most of AMD machines.
Any exception to rt1019 device ids in near future board design can
be handled using dmi based quirk for that machine.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220106150525.396170-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a driver does not supply a drain operation for outputs, a default code
path will execute msleep(50). Especially for a virtual midi device
this severely limmits the throughput.
This implementation for the virtual midi driver simply flushes the output
workqueue.
Signed-off-by: Stefan Sauer <st_kost@gmx.de>
Link: https://lore.kernel.org/r/20220106124145.17254-1-st_kost@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.
Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.
Fixes: d0250cf4f2 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for boards which have this setup and which specify which
external GPIO to use in the special Android AMCR0F28 ACPI device.
And add a quirk for the Asus TF103C tablet which uses this setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some X86 tablets, which ship with Android as factory installed OS,
specify codec IRQs/GPIOS in a special Android AMCR0F28 ACPI device.
Add support for retrieving the codec IRQ from this ACPI device instead
of from the 10EC5640 device describing the codec itself and enable this
on Asus MemoPad 7 ME176C tablets.
This fixes jack-detect not working on these tablets.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some boards where the firmware/fwnode information is in essence
read-only (x86 + ACPI boards) the i2c_client for the codec may contain
the wrong IRQ or no IRQ at all.
Since we only request the IRQ once snd_soc_component_set_jack() gets
called, allow machine drivers to override the IRQ with the proper one
through the data parameter to snd_soc_component_set_jack().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change jack_work from a struct work_struct to a struct delayed_work, this
is a preparation patch for adding support for boards where an external
GPIO is used for jack-detect, rather then one of the JD pins of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support") adds
re-queuing of the jack_work on resume when rt5640->jd_src != 0.
But the jack_work will unconditionally deref rt5640->jack and that might
be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver
call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to
disable the IRQ to avoid spurious wakeups, so when rt5640_resume()
runs rt5640->jack will be NULL in this case.
Make the queueing of the work conditional on rt5640->jack instead of
on rt5640->jd_src to fix this.
Fixes: 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to RM, on auto mode:
For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256
if sample rate is 8kHz-48kHz,
For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample
rate is 8kHz-48kHz.
With these setting the sound quality for 8kHz-48kHz can be improved.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Transfer the refined slots and slot_width to akcodec_get_mclk_rate()
for mclk calculation, otherwise the mclk frequency does not match
with the slots and slot_width for S16_LE format, because the default
slot_width is 32.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so
the mclk frequency exceeds the supported range of codec for
the case that sample rate is larger than 705kHZ and format is
S32_LE. Update the supported width for such case.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The speaker fixup that is used for the Yoga 7 14ITL5 also applies to
the IdeaPad Slim 9i 14ITL5. The attached patch applies the quirk to
initialise the amplifier on the IdeaPad Slim 9i as well.
This is validated to work on my laptop.
[ corrected the quirk entry position by tiwai ]
Signed-off-by: Bart Kroon <bart@tarmack.eu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/JAG24R.7NLJGWBF4G8U@tarmack.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A randconfig caught a compile warning that is now treated as a fatal
error:
sound/soc/codecs/ak4375.c:415:13: error: ‘ak4375_power_off’ defined but not used [-Werror=unused-function]
where ak4375_power_off() is used only from the PM handler.
As both suspend and resumes are already marked with __maybe_unused,
let's rip off the superfluous ifdef CONFIG_PM, so that the error above
can be avoided.
Fixes: 53778b8292 ("ASoC: Add AK4375 support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220105162409.20635-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for two CS35L41 using I2C bus and the component
binding method
[ Fix the entries to be sorted order by tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-11-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent few quirk entries for Lenovo haven't been put in the right
order. Let's arrange the table again.
Fixes: ad7cc2d41b ("ALSA: hda/realtek: Quirks to enable speaker output...")
Fixes: 6dc8697622 ("ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices")
Fixes: 8f4c90427a ("ALSA: hda/realtek: Add quirk for Legion Y9000X 2020")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch series adds support for the low power hibernation feature
on cs35l41. This allows the DSP memory to be retained whilst the
device enters a very low power state.
Legion Y9000X 2020 has a speaker, but the speaker doesn't work.
This can be fixed by applying alc285_fixup_ideapad_s740_coef
to fix the speaker's coefficients.
Besides, to support the transition between the speaker and the headphone,
alc287_fixup_legion_15imhg05_speakers needs to be run.
Signed-off-by: Baole Fang <fbl718@163.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220105140856.4855-1-fbl718@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not much going on framework release this time, but a big update for
drivers especially the Intel and SOF ones.
- Refinements and cleanups around the delay() APIs.
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code.
- Support for pin switches in simple-card derived cards.
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmHVprgACgkQJNaLcl1U
h9CGVQf8DQ0SsUiOKQOdGIcw/Os38EiR/rhGnDH5IxhbqqASrkFMTRe2fED2x2zr
AifAWehuMuloX/xufAkZPDP6v58mv4ZrXY+NSSFU+IRaeM5TgyxFfOlU/saNaHYC
zxIldSEopok9Hmpg48mVrWePIJ8qEln6NidS7qpt6ylJ+U9LSt5rVkp6Rj86/va1
/JCJ8qaN9FRP+mTVWVMcd1lFG4lsZbqlUiipdhNLZT1p2/2mfGxTOhjiYnygG4l0
PU+lIUFv+fTrjsMm9B9ZRFCZO/K5zop65O+wKyBZYwkH/UXmeGi6f1AvzAWf174z
5fRIosTgCDWKVIWrFrXYV8Qyp2kAMg==
=bHj3
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.17
Not much going on framework release this time, but a big update for
drivers especially the Intel and SOF ones.
- Refinements and cleanups around the delay() APIs.
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code.
- Support for pin switches in simple-card derived cards.
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx.
