Commit Graph

1222 Commits

Author SHA1 Message Date
Jerome Glisse
1fb107fc46 drm/radeon/kms: Convert radeon to new ttm_bo_init
Now bo init use placement structure like bo validation does.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 14:09:27 +10:00
Jerome Glisse
09855acb1c drm/ttm: Convert ttm_buffer_object_init to use ttm_placement
Convert ttm_buffer_object_init to use struct ttm_placement and
rename to ttm_bo_init for consistency with function naming. This
allow to give more complex placement at buffer creation. For
instance you ask to allocate bo into vram first but if there is
not enough vram you can give system as a second possible
placement. It also allow to create buffer in a specific range.

Also rename ttm_buffer_object_validate to ttm_bo_validate.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 14:09:05 +10:00
Dave Airlie
4361e52ad0 drm/radeon/kms: fix warning about cur_placement being uninitialised.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:59:32 +10:00
Dave Airlie
115a5c2ba0 Merge remote branch 'korg/drm-radeon-next' of into drm-linus
This merges some TTM overhauls to allow us to do better object placement
for certain radeon GPUs that need scanout+cursor within range of each other,
along with an API change to not return ERESTART to userspace, but to use
ERESTARTSYS properly internally and have it convert to EINTR and catch that
correctly. Also lots of radeon fixes across the board.
2009-12-10 15:48:04 +10:00
Dave Airlie
0b5e8db639 Merge remote branch 'anholt/drm-intel-next' into drm-linus
Pull more Intel changes in, especially one to init the GTT properly
2009-12-10 15:44:19 +10:00
Jerome Glisse
fb53f8621a drm/ttm: Print debug information on memory manager when eviction fails
This add helper function to print information on eviction placements
and memory manager status when eviction fails to allocate memory
space.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:28:13 +10:00
Jerome Glisse
99d7e48e8c drm: Add memory manager debug function
drm_mm_debug_table will print the memory manager state
in table allowing to give a snapshot of the manager at
given point in time. Usefull for debugging.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:28:06 +10:00
Dave Airlie
550e2d9270 drm/radeon/kms: restore surface registers on resume.
On resume on my rv530 laptop surface cntl was left disabled, so
wierd stuff would happen with rendering to a tiled front buffer.

This checks if the surface regs are assigned to bos and reprograms
the surface registers on resume using the same path that clears
them all on init.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:25:45 +10:00
Alex Deucher
779720a320 drm/radeon/kms/r600/r700: fallback gracefully on ucode failure
Sent the wrong patch earlier.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:19:16 +10:00
Jerome Glisse
7cb7d1d7b6 drm/ttm: Initialize eviction placement in case the driver callback doesn't
This would allow to catch driver callback error of not properly
setting the eviction placement structure.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-10 15:09:08 +10:00
Jerome Glisse
cf0fe4566d drm/radeon/kms: cleanup structure and module if initialization fails
This would allow us to properly unload others module like TTM if
initialization fails after we initiliazed TTM structure.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-10 15:09:07 +10:00
Jerome Glisse
eaa5fd1a66 drm/radeon/kms: actualy set the eviction placements we choose
Stupid bug, somehow copying the eviction placements into the
result structure was missing.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-10 15:09:06 +10:00
Jerome Glisse
4a04a844ba drm/radeon/kms: Fix NULL ptr dereference
radeon_atombios_fini might be call while there is not valid
atombios structure allocated, thus test for a not null ptr
before trying to access this structure.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-10 15:09:06 +10:00
Alex Deucher
b27b63750d drm/radeon/kms/avivo: add support for new pll selection algo
Supported on all AVIVO-based asics.
Can be disabled via the new_pll module parameter:
new_pll=0 - disable
new_pll=1 - enable
enabled by default

[airlied: fixed to use do_div]
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-10 15:09:05 +10:00
Alex Deucher
69b3b5e59b drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-12-10 15:09:05 +10:00
Dave Airlie
2e7b6f7fa6 drm/radeon/kms: fix return value from fence function.
We only want to return here for errors, the wait functions return
a positive timeout otherwise, which gets back to userspace and
causes X to crash here.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:04 +10:00
Thomas Hellstrom
5cc6fbab9d drm/radeon: Remove tests for -ERESTART from the TTM code.
Also sets affected TTM calls up to not wait interruptible, since
that would cause an in-kernel spin until the TTM call succeeds, since
the Radeon code does not return to user-space when a signal is received.

Modifies interruptible fence waits to return -ERESTARTSYS rather than
-EBUSY when interrupted by a signal, since that's the (yet undocumented)
semantics required by the TTM sync object hooks.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:03 +10:00
Thomas Hellstrom
98ffc4158e drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
Return -ERESTARTSYS instead of -ERESTART when interrupted by a signal.
The -ERESTARTSYS is converted to an -EINTR by the kernel signal layer
before returned to user-space.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:03 +10:00
Jerome Glisse
312ea8da04 drm/radeon/kms: Convert radeon to new TTM validation API (V2)
This convert radeon to use new TTM validation API, it doesn't
really take advantage of it beside in the eviction case.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:02 +10:00
Jerome Glisse
ca262a9998 drm/ttm: Rework validation & memory space allocation (V3)
This change allow driver to pass sorted memory placement,
from most prefered placement to least prefered placement.
In order to avoid long function prototype a structure is
used to gather memory placement informations such as range
restriction (if you need a buffer to be in given range).
Range restriction is determined by fpfn & lpfn which are
the first page and last page number btw which allocation
can happen. If those fields are set to 0 ttm will assume
buffer can be put anywhere in the address space (thus it
avoids putting a burden on the driver to always properly
set those fields).

This patch also factor few functions like evicting first
entry of lru list or getting a memory space. This avoid
code duplication.

V2: Change API to use placement flags and array instead
    of packing placement order into a quadword.
V3: Make sure we set the appropriate mem.placement flag
    when validating or allocation memory space.

[Pending Thomas Hellstrom further review but okay
from preliminary review so far].

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:02 +10:00
Jerome Glisse
a2e68e92d3 drm: Add search/get functions to get a block in a specific range
These are required for changes to TTM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:01 +10:00
Dave Airlie
cf2f05d30d drm/radeon/kms: fix avivo tiling regression since radeon object rework
The object rework moved the tiling flag setup around wrongly,
so tiling we getting setup then overwritten by fb format.

Fixes regression with drm-radeon-next on rv530 laptop tiling test.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:00 +10:00
Chris Wilson
4f8d619cc3 drm/i915: Remove a debugging printk from hangcheck
A residual bare printk survived the merger of the hang detector, remove
this debugging left-over.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-08 23:40:47 -08:00
Alex Deucher
d3f420d108 drm/radeon/kms: make sure i2c id matches
Entries in the i2c table aren't always ordered
by id.  This allows us to remove some quirks
that are no longer needed.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-09 13:31:10 +10:00
Alex Deucher
279b215ecb drm/radeon/kms: make sure ss id matches
entries in the ss table aren't always ordered
by id.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-09 13:31:07 +10:00
Alex Deucher
390d0bbe88 drm/radeon/kms: connector fixes
- Don't add dac load detection property to DVI-D
- Make sure i2c info is valid before adding DP aux chan bus
- Don't create scaling_mode_property twice
- fix typo that prevented coherent and load detection from working
- add coherent prop to DP (for dp->dvi adapters)

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-09 13:31:00 +10:00
Dave Airlie
ec42a6e7dc drm/ttm: fix memory leak noticed by kmemleak.
If we don't need the zone we need to free it.

Acked-By: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-09 13:29:37 +10:00
Zhao Yakui
b16d9acbdb drm: disable all the possible outputs/crtcs before entering KMS mode
Sometimes we will use a crtc for integerated LVDS, which is different with
that assigned by BIOS. If we want to get flicker-free transitions,
then we could read out the current state for it and set our current state
accordingly.

But it is true that if we aren't reading current state out, we do need
to turn everything off before modesetting.  Otherwise the clocks can get very
angry and we get things worse than a flicker at boot.
In fact we also do the similar thing in UMS mode. We will disable all the
possible outputs/crtcs for the first modesetting.

So we disable all the possible outputs/crtcs before entering the KMS mode.
Before we configure connector/encoder/crtc, the function of
drm_helper_disable_unused_function can disable all the possible outputs/crtcs.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-09 13:28:07 +10:00
Andrew Lutomirski
7e8b60faea drm/i915: restore render clock gating on resume
Rather than restoring just a few clock gating registers on resume,
just reinitialize the whole thing.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
[anholt: Fixed up for RC6 support landed since the patch was written]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-08 06:32:51 -08:00
Dave Airlie
7b0a9e8302 Merge remote branch 'korg/drm-radeon-dp' into drm-linus
This merges the radeon KMS DisplayPort and hotplug detect support.

Tested on RV635 DP card with a Dell 2408 monitor.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 14:29:15 +10:00
Dave Airlie
3f838fc50c Merge remote branch 'korg/drm-radeon-next' into drm-linus
This merges all the radeon changes that weren't reliant on core-next.
2009-12-08 14:06:12 +10:00
Dave Airlie
3ff99164f6 Merge remote branch 'anholt/drm-intel-next' into drm-linus
This merges the upstream Intel tree and fixes up numerous conflicts
due to patches merged into Linus tree later in -rc cycle.

Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/drm_dp_i2c_helper.c
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/i915_suspend.c
2009-12-08 14:03:47 +10:00
Dave Airlie
1bd049fa89 Merge branch 'drm-core-next' into drm-linus
Bring all core drm changes into 2.6.32 tree and resolve
the conflict that occurs.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 13:52:41 +10:00
Ben Skeggs
b0a007dc27 drm/kms: fix fb cmap allocation to use modeset->crtc not crtc
crtc may be undefined at this point.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 11:15:10 +10:00
Alex Deucher
d4877cf229 drm/radeon/kms: enable hpd support
This enabled interrupt driven hpd support for all
radeon chips.  Assuming the hpd pin is wired up
correctly, the driver will generate uevents on
digital monitor connect and disconnect and retrain
DP monitors automatically.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:48:22 +10:00
Alex Deucher
429770b3e3 drm/radeon/kms: add asic callbacks for hpd
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:48:12 +10:00
Alex Deucher
e0df1ac5c2 drm/radeon/kms: add hpd support for r6xx/r7xx/rs780/rs880 asics
This just adds the functionality, it's not hooked up
yet.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:48:07 +10:00
Alex Deucher
dcfdd40835 drm/radeon/kms: add hpd support for r5xx/rs600/rs690/rs740 asics
This just adds the functionality, it's not hooked up
yet.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:47:58 +10:00
Alex Deucher
05a05c506f drm/radeon/kms: add hpd support for r1xx-r4xx asics
This just adds the functionality, it's not hooked up
yet.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:46:38 +10:00
Alex Deucher
b500f68045 drm/radeon/kms: add regs and irq tracking bits for hpd
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:46:34 +10:00
Alex Deucher
eed45b30cd drm/radeon/kms: get HPD info for connectors
This populates the connectors with HPD (Hot Plug Detect)
information.  This will be used in subsequent patches
for automatic digital monitor connect/disconnect handling.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:46:28 +10:00
Alex Deucher
53c1e09fea drm/radeon/kms: clean up DP debugging
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:49 +10:00
Alex Deucher
9fa05c98d6 drm/radeon/kms: fix DP detect
only return connected if there is actually a
monitor connected.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:48 +10:00
Dave Airlie
e8696330e2 drm/radeon/kms: drop unused array to fix warning.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:48 +10:00
Dave Airlie
58682f107a drm/radeon/kms: do dp link training at dpms on time not mode set.
This moves the radeon DP link training call to happen when we
dpms on the encoder not when we set the mode.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:47 +10:00
Dave Airlie
5fbfce7fc9 drm/radeon/kms: make displayport work by reorganising vsemph setup.
This fix reorganises the initial DP link training slightly, and
actually makes DP work under kms here.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:46 +10:00
Dave Airlie
54d9cb47dd drm/radeon/kms/dp: fix return in dpcd retrival.
Not returning here caused us to get a display port version of 0 for everything
this caused power up to not get sent which ends up in a black screen.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:45 +10:00
Alex Deucher
ffd09c648a drm/radeon/kms: free aux channel i2c adapter on destroy
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:44 +10:00
Alex Deucher
5801ead6bd drm/radeon/kms: add support for DP modesetting
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:44 +10:00
Alex Deucher
f92a8b6758 drm/radeon/kms: handle dp sinks in atom encoder/transmitter tables
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:43 +10:00