mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 12:11:40 +00:00
1e756248be
1308777 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Heiner Kallweit
|
3b067536da |
r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
Add a missing MODULE_FIRMWARE entry.
Fixes:
|
||
Paolo Abeni
|
bfde62650c |
Merge branch 'fix-maximum-tx-rx-frame-sizes-in-ravb-driver'
Paul Barker says:
====================
Fix maximum TX/RX frame sizes in ravb driver
These patches fix a couple of bugs in the maximum supported TX/RX frame
sizes in the ravb driver.
* For the GbEth IP, we were advertising a maximum TX frame size/MTU
that was larger that the maximum the hardware can transmit.
* For the R-Car AVB IP, we were unnecessarily setting the maximum RX
frame size/MRU based on the MTU, which by default is smaller than
the maximum the hardware can receive.
For the R-Car AVB IP, the maximum TX frame size should be 2047 (not
2048), but additional work will be required to validate that change so
it is not included in this series.
Changes v2->v3:
* Pick up Reviewed-by tag and suggested comment improvement from
Niklas.
Changes v1->v2:
* Rebase on net tree as these are both bugfixes.
* Pick up Reviewed-by tags.
====================
Link: https://patch.msgid.link/20240918081839.259-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
Paul Barker
|
ec8234717d |
net: ravb: Fix R-Car RX frame size limit
The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.
While we're here, improve the description of the receive frame length
setting as suggested by Niklas.
Fixes:
|
||
|
Paul Barker
|
1d63864299 |
net: ravb: Fix maximum TX frame size for GbEth devices
The datasheets for all SoCs using the GbEth IP specify a maximum
transmission frame size of 1.5 kByte. I've confirmed through internal
discussions that support for 1522 byte frames has been validated, which
allows us to support the default MTU of 1500 bytes after reserving space
for the Ethernet header, frame checksums and an optional VLAN tag.
Fixes:
|
||
KhaiWenTan
|
675faf5a14 |
net: stmmac: Fix zero-division error when disabling tc cbs
The commit |
||
|
Heiner Kallweit
|
ced8e8b8f4 |
r8169: add tally counter fields added with RTL8125
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it.
Fixes:
|
||
Miklos Szeredi
|
fcd2d9e1fd |
fuse: clear FR_PENDING if abort is detected when sending request
The (!fiq->connected) check was moved into the queuing method resulting in
the following:
Fixes:
|
||
Daniel Golle
|
6f9defaf99 |
net: phy: aquantia: fix applying active_low bit after reset
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes:
|
||
|
Daniel Golle
|
d2b366c434 |
net: phy: aquantia: fix setting active_low bit
phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting
in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit.
Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit.
Fixes:
|
||
Youssef Samir
|
f011b313e8 |
net: qrtr: Update packets cloning when broadcasting
When broadcasting data to multiple nodes via MHI, using skb_clone()
causes all nodes to receive the same header data. This can result in
packets being discarded by endpoints, leading to lost data.
This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT
packet is broadcasted. All nodes receive the same destination node ID,
causing the node connected to the client to discard the packet and
remain unaware of the client's deletion.
Replace skb_clone() with pskb_copy(), to create a separate copy of
the header for each sk_buff.
Fixes:
|
||
Damien Le Moal
|
0e9a2990a9 |
ata: libata-scsi: Fix ata_msense_control() CDL page reporting
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes:
|
||
|
Damien Le Moal
|
03a9cfc131 |
ata: libata-scsi: Fix ata_msense_control_spgt2()
ata_msense_control_spgt2() can be called even for devices that do not
support CDL when the user requests the ALL_SUB_MPAGES mode sense page,
but for such device, this will cause a NULL pointer dereference as
dev->cdl is NULL. Similarly, we should not return any data if
ata_msense_control_spgt2() is called when the user requested the
CDL_T2A_SUB_MPAGE or CDL_T2B_SUB_MPAGE pages for a device that does not
support CDL.
Avoid this potential NULL pointer dereference by checking if the device
support CDL on entry to ata_msense_control_spgt2() and return 0 if it
does not support CDL.
Reported-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Tested-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Fixes:
|
||
Huacai Chen
|
f339bd3b51 |
Docs/LoongArch: Add advanced extended IRQ model description
Introduce the advanced extended interrupt controllers (AVECINTC). This
feature will allow each core to have 256 independent interrupt vectors
and MSI interrupts can be independently routed to any vector on any CPU.
The whole topology of irqchips in LoongArch machines looks like this if
AVECINTC is supported:
+-----+ +-----------------------+ +-------+
| IPI | --> | CPUINTC | <-- | Timer |
+-----+ +-----------------------+ +-------+
^ ^ ^
| | |
+---------+ +----------+ +---------+ +-------+
| EIOINTC | | AVECINTC | | LIOINTC | <-- | UARTs |
+---------+ +----------+ +---------+ +-------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+---------+ +---------+ +---------+
| Devices | | PCH-LPC | | Devices |
+---------+ +---------+ +---------+
^
|
+---------+
| Devices |
+---------+
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
|
||
Xi Ruoyao
|
64c35d6c0f |
LoongArch: Remove posix_types.h include from sigcontext.h
Nothing in sigcontext.h seems to require anything from linux/posix_types.h. This include seems a MIPS relic originated from an error in Linux 2.6.11-rc2 (in 2005). The unneeded include was found debugging some vDSO self test build failure (it's not the root cause though). Link: https://lore.kernel.org/linux-mips/20240828030413.143930-2-xry111@xry111.site/ Link: https://lore.kernel.org/loongarch/0b540679ec8cfccec75aeb3463810924f6ff71e6.camel@xry111.site/ Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Wentao Guan
|
5016c3a31a |
LoongArch: Fix memleak in pci_acpi_scan_root()
Add kfree(root_ops) in this case to avoid memleak of root_ops, leaks when pci_find_bus() != 0. Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Uros Bizjak
|
d4f31acf13 |
LoongArch: Simplify _percpu_read() and _percpu_write()
Now _percpu_read() and _percpu_write() macros call __percpu_read() and __percpu_write() static inline functions that result in a single assembly instruction. However, percpu infrastructure expects its leaf definitions to encode the size of their percpu variable, so the patch merges all the asm clauses from the static inline function into the corresponding leaf macros. The secondary effect of this change is to avoid explicit __percpu annotations for function arguments. Currently, __percpu macro is defined in include/linux/compiler_types.h, but with proposed patch [1], __percpu definition will need macros from include/asm-generic/percpu.h, creating forward dependency loop. The proposed solution is the same as x86 architecture uses. [1] https://lore.kernel.org/lkml/20240812115945.484051-4-ubizjak@gmail.com/ Tested-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
f93f67d06b |
LoongArch: Improve hardware page table walker
LoongArch has similar problems explained in commit
|
||
|
Huacai Chen
|
f04de6d8f2 |
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See
|
||
|
Huacai Chen
|
e86935f705 |
LoongArch: Add ARCH_HAS_SET_MEMORY support
Add set_memory_ro/rw/x/nx architecture hooks to change the page attribution. Use own set_memory.h rather than generic set_memory.h (i.e. include/asm-generic/set_memory.h), because we want to add other function prototypes here. Note: We can only set attributes for KVRANGE/XKVRANGE kernel addresses. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Jiaxun Yang
|
34e3c4500c |
LoongArch: Rework CPU feature probe from CPUCFG/IOCSR
Probe ISA level, TLB, IOCSR information from CPUCFG to improve kernel resilience to different core implementations. BTW, IOCSR register definition appears to be a platform-specific spec instead of an architecture spec, even for the Loongson CPUs there is no guarantee that IOCSR will always present. Thus it's dangerous to perform IOCSR probing without checking CPU type and instruction availability. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Bibo Mao
|
d0bb0b6000 |
LoongArch: Enable ACPI BGRT handling
Add ACPI BGRT support on LoongArch so it can display image provied by acpi table at boot stage and switch to graphical UI smoothly. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Tiezhu Yang
|
e8dd556c74 |
LoongArch: Enable generic CPU vulnerabilites support
Currently, many architectures support generic CPU vulnerabilites, such as x86, arm64 and riscv: commit |
||
Kent Overstreet
|
7eb4a319db |
bcachefs: Fix infinite loop in propagate_key_to_snapshot_leaves()
As we iterate we need to mark that we no longer need iterators - otherwise we'll infinite loop via the "too many iters" check when there's many snapshots. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
6d12d7ace9 |
bcachefs: Ensure BCH_FS_accounting_replay_done is always set
if it doesn't get set we'll never be able to flush the btree write buffer; this only happens in fake rw mode, but prevents us from shutting down. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
Linus Torvalds
|
abf2050f51 |
media updates for v6.12-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmbxByQACgkQCF8+vY7k 4RUWeg//QHB1sjjYsRs0IF6wBdzxWwpjqudxLjUTDEMKHVHUuCPRzMayZrokfTha /NOt+SSKpZqRtCjKuyLz7lup81b+oFXQ4CKChXJvLVJ+wuFFd/B9fbs3yw5fCWFk odHjVUpLOqdDSOHcqisKwim0ENzvJ4/rvFiiWUPqPJbjWYEyXX4eW3F8JlAXkdkI OGX9ixPsdAG2vdXpIsp3T3/KKTo7qwM6j/ckQ4SxkrTHMMdvJrkl3HutibaqOmOq FcR4Y9XSkBsNlrJ9CvG/uOSz5aQrY7A7s21OiH59FFyeOWsvKGFkLmAox/+M6vg8 G/cjZjK3AiDll2fmAWo33MuyQG9HOTEFjWNN3cusr1gTcFowqH+cIjV3SKa1dH/1 G+4KoOzJdkFrt1Y21zg+tWejoOjdPpklTiSAhgYRSblqsMbr3XF0cOqnSs5JOKo3 ZgMko/JEI0CKltYc7kcTy8w6fg3g8B9RJ7nATgsKEQsln1hEy/Bii482tk6vbb9g 7YLAzrExWnLjxOxco/LzHcBkQMov6/HA5ntEMieaybRcMPsXE8WNA2ElNOFOREgP MSWqoQD+7CuqYRnmfpQw2SPA0nRy2BT4ltITsA/ksfBWLvoK8UX99eiznkpWSm7p 191mGPalKV07RUVXgXRTynTvfma6oTKIaebvPLoVaKg11cC5hq0= =TPMV -----END PGP SIGNATURE----- Merge tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New CEC driver: Extron DA HD 4K Plus - Lots of driver fixes, cleanups and improvements * tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits) media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode() media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable media: atomisp: set lock before calling vb2_queue_init() media: atomisp: Improve binary finding debug logging media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]() media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2 media: atomisp: add missing wait_prepare/finish ops media: atomisp: Remove unused declaration media: atomisp: use clamp() in compute_coring() media: atomisp: use clamp() in ia_css_eed1_8_encode() media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output() media: atomisp: Replace rarely used macro from math_support.h media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h media: atomisp: bnr: fix trailing statement media: atomisp: move trailing */ to separate lines media: atomisp: move trailing statement to next line. media: atomisp: Fix trailing statement in ia_css_de.host.c media: atomisp: Fix spelling mistakes in atomisp.h media: atomisp: Fix spelling mistakes in atomisp_platform.h media: atomisp: Fix spelling mistake in csi_rx_public.h ... |
||
|
Linus Torvalds
|
9ab27b0186 |
The core clk framework is left largely untouched this time around except for
support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much
more excited about the support for loading DT overlays from KUnit tests so that
we can test how the clk framework parses DT nodes during clk registration. The
clk framework has some places that are highly DeviceTree dependent so this
charts the path to extend the KUnit tests to cover even more framework code in
the future. I've got some more tests on the list that use the DT overlay
support, but they uncovered issues with clk unregistration that I'm still
working on fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm and
Renesas SoCs, making it fairly usual. Looking closer, there are fixes for
things all over the place, like adding missing clk frequencies or moving
defines for the number of clks out of DT binding headers into the drivers.
There are even conversions of DT bindings to YAML and migration away from
strings to describe clk topology. Overall it doesn't look unusual so I expect
the new drivers to be where we'll have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them
turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and
add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks
on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating more
memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to
i.MX7D lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the
i.MXRT1050 driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema
-----BEGIN PGP SIGNATURE-----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=XmiQ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
||
|
Linus Torvalds
|
4e2c9cd7dc |
i2c-for-6.12-rc1
I2C core
========
After 15 years of deprecation, the I2C_COMPAT symbol has finally been
removed. Also client addresses are now locked during initialization to
prevent race conditions between different kinds of instantiation. Scoped
foreach OF child loops are now used. And the testunit has received some
cleanups and documentation improvements as well as two new tests, one
for repeated start and one for triggering SMBusAlert interrupts.
I2C host drivers
================
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
AT24 updates
============
- document a new model from giantec in DT bindings
-----BEGIN PGP SIGNATURE-----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=DTNY
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
||
|
Linus Torvalds
|
00b43f85f2 |
libnvdimm for 6.12
* Use Open Firmware helper routines * Fix memory leak when nvdimm labels are incorrect * remove some dead code -----BEGIN PGP SIGNATURE----- iIkEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZvCawRQcaXJhLndlaW55 QGludGVsLmNvbQAKCRCebuN7TNx1Mee0APdJJHx2GJtfKYyLCufjqbLkFvd6FXBQ h+KzGJuyXjIPAP9wlDdMA1uReR0jQ25zbTh1UKNIeaXH/rf5B/S2BTT3Cw== =7wOJ -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ira Weiny: - use Open Firmware helper routines - fix memory leak when nvdimm labels are incorrect - remove some dead code * tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Remove dead code for ENODEV checking in scan_labels() nvdimm: Fix devs leaks in scan_labels() nvdimm: Use of_property_present() and of_property_read_bool() |
||
|
Linus Torvalds
|
20d9ba738b |
- Added a check for the return value of spi_setup() in the l4f00242t03 driver to catch errors.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjT8ACgkQUa+KL4f8 d2G9/g/+PkSH2AAcArhenm9KaCK0spyGrZ7Pdai7cF0nhUcTibh6T5MaOqBecPLd nPNZ27CLcLoKnBAPWmbE0FLNAX8OFudCAr114KpBkZe3eP7FhJ0uO/qEi+4Nbfhv t5Uef15sf7wnkLJq+rJFNqg1tMj9EqsAIQj85Z9G3e5m9BveCDlq675rFWmbByED pVwFtqF2kgI/F4Zdv8RSaExcRTz+q3k7jRTamFKS2V0SmhsWuy64Wz0O+fk3SWE5 jgopT/lGrN7K/cqnJfr++5kK012CwgOOqbgmbDEUfidbZkqsHOxKyjp5NdLykV2V vdHTAnmIVCanVd3yy7HSNafgCJkmonn2n9RMDEpIzhB6IfDN+kylqKFuhQ1/MwbS yfPQI4f+iHkSeVd85pEbCEeZuWMriwOBdiydqELs0FPhyZ9ezv4De+B9BKndlpuC JTzSgYvO4HqxsYGyTRIPmrd9zWSwfrxUFKLN4zYP3oCVQdLUVWh3JHWOQlWmds4e GyWnTfjpCK3FpjEVJZ8siS4Qbv5UzIQj+BsaoS5kkxkDL3GNOG4x+V6dm2FH6jbq po6K9cK3Zlxc5mfgGxvEsJ2DlIXpzQmrb2dsW5vR0UHjQAUapExIXlwlSYtgEybg sh8PHsTnbNa/5Uj6G/Cr9GTv3YZifS3EFrF06bMYjBcygnQJ1Uk= =9M/C -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight update from Lee Jones: - Added a check for the return value of spi_setup() in the l4f00242t03 driver to catch errors * tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: l4f00242t03: Add check for spi_setup |
||
|
Linus Torvalds
|
f2debe057f |
- Limited LED current based on thermal conditions in the QCOM flash LED driver.
- Fixed device child node usage in the BD2606MVV and PCA995x drivers. - Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver. - Reset the LED controller during the probe in the LM3601X driver. - Used device_for_each_child_node() to access device child nodes in the PCA995X driver. - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver. - Replaced msleep() with usleep_range() in the SUN50I-A100 driver. - Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers. - Added missing of_node_get for probe duration in the MAX77693 driver. - Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes. - Used devm_clk_get_enabled() helpers in the LP55XX driver. - Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC. - Set num_leds after allocation in the GPIO driver. - Removed irrelevant blink configuration error message in the PCA9532 driver. - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjRMACgkQUa+KL4f8 d2Ey+Q//WsNhqFE6YQmWIuqd9PznAb64o98JeWWymgM/W4DJkQPpVlK1+ceTWVCW OsE8017oiuqD1psK6dkAF+NGB85YUoCSHp1ymPrjN3BYFJfu95xLaHCt7qvKvsCu HR29dvscgubxwns5imxtbelwjSbQRxP+qfggyhwgpj6lQ0s5W2mSmKAU45zvnInI x4Hn/3cfqCkiJateqGj/tz49C/P2P1y3MXC9V3FBTQEWSsZt/BzMQvV/lxl0Ommn +5WAnBRmGN5/PhTpaIl/nD5XgSM3cnTA8rqz4EORQmr4X2nstAvsTj0KEXf8zs7g k/VcKmYnlraRJTIkC1kb8FalO7FsF+ubHxkMltEmvsNWEa2b5nhLEpH3RdA+U7B3 0PpSnO814ii8QuTvbALgwIre5N4kOn0oVS7FMIfDcNy2K4y/RP18xO5Qxc1f5Ssl eM/nOBoNISvuLzAnb3AZnMzJiHqiQlH7VW8bUnjb7FcIZqNaKllF5PXhSuSopSvi 9M9TrHjd7rZ9l7iBlj2Td7ZVNZ092TkwQcaPRyybIAONqWZ101UNlLL/Bxa0UNJ+ agExjqIQgGDHJCVQrXQAklGVFTgOwjx8qDcuY5r7CTwBEDKBwUQqbIdVa05e1eqq Y8mRc0Fao1sZh6ZG1GNFeaFh3aLLcrFMRIa/qqovciKXa/VoNXQ= =a/t6 -----END PGP SIGNATURE----- Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: - Limited LED current based on thermal conditions in the QCOM flash LED driver - Fixed device child node usage in the BD2606MVV and PCA995x drivers - Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver - Reset the LED controller during the probe in the LM3601X driver - Used device_for_each_child_node() to access device child nodes in the PCA995X driver - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver - Replaced msleep() with usleep_range() in the SUN50I-A100 driver - Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers - Added missing of_node_get for probe duration in the MAX77693 driver - Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes - Used devm_clk_get_enabled() helpers in the LP55XX driver - Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC - Set num_leds after allocation in the GPIO driver - Removed irrelevant blink configuration error message in the PCA9532 driver - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver * tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits) leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE() leds: pca9532: Remove irrelevant blink configuration error message leds: gpio: Set num_leds after allocation dt-bindings: leds: Convert leds-lm3692x to YAML format leds: lp55xx: Use devm_clk_get_enabled() helpers leds: as3645a: Use device_* to iterate over device child nodes leds: qcom-lpg: Simplify with scoped for each OF child loop leds: turris-omnia: Simplify with scoped for each OF child loop leds: sc27xx: Simplify with scoped for each OF child loop leds: pca9532: Simplify with scoped for each OF child loop leds: netxbig: Simplify with scoped for each OF child loop leds: mt6323: Simplify with scoped for each OF child loop leds: mc13783: Use scoped device node handling to simplify error paths leds: lp55xx: Simplify with scoped for each OF child loop leds: is31fl32xx: Simplify with scoped for each OF child loop leds: bcm6358: Simplify with scoped for each OF child loop leds: bcm6328: Simplify with scoped for each OF child loop leds: aw2013: Simplify with scoped for each OF child loop leds: 88pm860x: Simplify with scoped for each OF child loop leds: max77693: Simplify with scoped for each OF child loop ... |
||
|
Linus Torvalds
|
b0a53b4f3f |
- Added support for the Analog Devices ADP5585 GPIO and PWM functions.
- Added parsing of GPIO hogs for the ADP5585. - Fixed module autoloading in the MAX14577 driver. - Simplified and cleaned up the CROS_EC driver. - Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the INTEL_SOC_PMIC_CHTWC driver. - Added support for the RK806 PMIC on the I2C bus. - Removed the remaining header file for the DS1WM driver. - Added compatible strings for various devices in the device tree bindings. - Fixed a comma-related issue in the 88PM860X_CORE driver. - Constified read-only regmap structs in various drivers. - Used scoped variables with memory allocators to simplify error paths in the MT6360 and SYSCON drivers. - Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjKgACgkQUa+KL4f8 d2HO3A//Vj7h1R6noTl9Zc3fDzFvoTCnsPsIuH52AQHnk7E2ReCFbRwQeXW/aOTa QtvY+0LxYnhd/wUzS9ER4zQo5AP+mAk5OAb7oVnR6nL/RJdbWh+0tFu89YYn2oWi YeKxPA/SoD6wRnHFf7x2NXc12nbvNVJ7Yc5C8PALB+K41d2o6hs5dgn9DBe2kExY pn1FH/EMv2czg5B5PEDteOXcTEV+Q//hhNfBpeRbmF/qEIAIA/ZTDeKaFe2LOfEq z144v8m8TcJBwxXSg1KQhEyYdTcz+DtbIJ6YWr7ehllhXq/QPrlLIj0XBtgmPclm PaeOQFT007C/oFERSPA4+szwJFnOjkapE/ui5BwQ8BuXfvtp7IxwU8tHJHqO01bb ut/sVNtQcTZ9KplVa1m1JTKPKeoTWlfpo4B/2SMsnvDLKrvPQXtuFAKYSzusZWX0 oJtXGuSEJMQ/27jyxn209VDhdtAPIgLnFFxnoXoIOW7n2sTfeP4AjTFHUIzD2x/u ufxUQCM9hNvAz3nYEtdxSh2EVf0bY+Lzu318ce3Hpa/LgFRLH8lqL1IsO1C9ljF7 uPauDrDQCGmGEPD9x8bR4zRaEUj5qFTfeJHmbwh7xqjqzH9JKMiV6OMbAw2lHP9B D0KmsDEcQiU76uuBwRuqXonOfFqGmPGeYvluXXNbeM8st8H8Y34= =WuEO -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: - Added support for the Analog Devices ADP5585 GPIO and PWM functions - Added parsing of GPIO hogs for the ADP5585 - Fixed module autoloading in the MAX14577 driver - Simplified and cleaned up the CROS_EC driver - Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the INTEL_SOC_PMIC_CHTWC driver - Added support for the RK806 PMIC on the I2C bus - Removed the remaining header file for the DS1WM driver - Added compatible strings for various devices in the device tree bindings - Fixed a comma-related issue in the 88PM860X_CORE driver - Constified read-only regmap structs in various drivers - Used scoped variables with memory allocators to simplify error paths in the MT6360 and SYSCON drivers - Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs * tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits) mfd: atc260x: Convert a bunch of commas to semicolons dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs dt-bindings: mfd: syscon: Add rk3576 QoS register compatible dt-bindings: mfd: adp5585: Add parsing of hogs mfd: tc3589x: Drop vendorless compatible string from match table mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped() mfd: max77620: Use for_each_child_of_node_scoped() mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict mfd: cros_ec: Update module description mfd: cros_ec: Simplify and clean-up cros_ec_dev_init() mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading mfd: rk8xx: Add support for rk806 on i2c bus dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible mfd: ds1wm: Remove remaining header file MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER mfd: 88pm860x-core: Convert comma to semicolon mfd: syscon: Use scoped variables with memory allocators to simplify error paths mfd: mt6360: Use scoped variables with memory allocators to simplify error paths ... |
||
|
Linus Torvalds
|
8874d92b57 |
dmaengine updates for v6.12
New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmbv/CAACgkQfBQHDyUj g0cEnRAAsv/rEDi47ku1dkbyOOfbhySj3/TyhOWs0eXPlJLrlMEC4b1i5QIP+Ldd ldzYIdlMLVbmFD+VfTOgqGY2qPgBTdahoCSaTH/GoiCV9OnKt2ImjoZ7KSWQjd90 Qtl8IQnuNBFMl3+DchU/EtGWA4+5dGM3y0p+TdIHxtf7z8Quos9XCp5QaTw8+4wg TMeQQKaoGjjm9aOBNwk9B9f3yqYB39ZmmqWfhII2395wrWulQYFsji6DnQhVcHrs EZ4w2lRIyqELszHSZ/8VPFfzyolsaDjTwC+1zZwVg8gFna2KOpZgRx1a16B+KZ7n w6BnMERLCTgkle9FQdhnzCeG8pZpk2YJT1OYLZHSH2XSHau9O7d9PSQ8mEwecDEz Iq3x0HfcZ5Cz2sansCwGTJQQpSvLqw74hybhhiFk6BQhEh3Bjq+7AjJvTQRGK2X8 w+v4e2hx7SpPCMIlXtdSf/1YhHil9897JS/nbAdYW2PflZhPSbDbH2c0hklab08K BdbriaAoT5XkQB0LKSDNHDcl+NxX0gph/geHpg2QD+JuJOydHR1El6nI2/d8Styj w07QKVCa/O46Bxz4AwQNIFOVL8JnygNTBjaJKof+6DX2/v4TikMcJYnVMj3i1fWB t/NsBzim1zliiGaZNiFoo3obzuzlYs2/yZ++dYZYY8oyLRGjJjM= =beF+ -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Unusually, more new driver and device support than updates. Couple of new device support, AMD, Rcar, Intel and New drivers in Freescale, Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc. New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma" * tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits) dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname dmaengine: Fix spelling mistakes dmaengine: Add dma router for pl08x in LPC32XX SoC dmaengine: fsl-edma: add edma src ID check at request channel dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate() dmaengine: avoid non-constant format string dmaengine: imx-dma: Remove i.MX21 support dt-bindings: dma: fsl,imx-dma: Document the DMA clocks dmaengine: Loongson1: Add Loongson-1 APB DMA driver dt-bindings: dma: Add Loongson-1 APB DMA dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform dmaengine: ti: k3-udma: Remove unused declarations dmaengine: amd: qdma: Add AMD QDMA driver dmaengine: xilinx: dpdma: Add support for cyclic dma mode dma: ipu: Remove include/linux/dma/ipu-dma.h dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh" dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma ... |
||
|
Linus Torvalds
|
fbb86b0d5f |
phy-for-6.12
- New Support
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
- Removal
- obsolete qcom,usb-8x16-phy bindings
- Updates
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings
-----BEGIN PGP SIGNATURE-----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=XJmz
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hw support:
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
Removed:
- obsolete qcom,usb-8x16-phy bindings
Updates:
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings"
* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
phy: ti: gmii-sel: Simplify with dev_err_probe()
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
phy: mediatek: xsphy: Simplify with scoped for each OF child loop
phy: mediatek: tphy: Simplify with scoped for each OF child loop
phy: hisilicon: usb2: Simplify with scoped for each OF child loop
phy: cadence: sierra: Simplify with scoped for each OF child loop
phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
phy: qcom: qmp-pcie: Configure all tables on port B PHY
phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
dt-bindings: phy: socionext,uniphier: add top-level constraints
phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
...
|
||
|
Linus Torvalds
|
7116747a68 |
soundwire updates for 6.12
- bus cleanup for warnings and probe deferral errors suppression - cadence recheck for status with a delayed work - intel interrupt rework on reset exit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmbv9W8ACgkQfBQHDyUj g0cZqxAAjsXmwjky3zGs8vuC8hFfTJ4nI9NGW0pPKcYlTLDCGfN49/caL0X+BYvE 12x+tHyKa3H29as5CDkS/NkmtBGI27V3wcdOTQEv9OXvv1G/Kc8sfB5wJZS2deec 41EvSu/If1qqQaNXoooI3s63S23SE22vxE6RtN7UNRKlgXs/5qjIVPhdYSUcXiCl gl7wG/NgyfMwH17LCY2W1l2/BSP7XKRBny+cT8dzNR1muaZn8Noi3RiIzI+eEWVv ldHHkc5yTrCYVsi/xW9oDmUJJ4IKZU1TBGAbtOe/EtaJuMyjOCVClfTG96WQrpFl 0gDS7qlGjD0tf8RVn4QLVV68ZVXI6EYPUrv2+Z9f8swf21RLKEjx5aflxktzEwPY SDPvRhpXa5FjmHt7yhVMLXV1u4CyNWepeEcbmZgsll8zrAXwIcltH8NDicURdzqK UHzQFG3LPHrlnC5zBsFpRXFoC8VDa//1kr6vEsXvnY1ehMRUa6+Hvy+1+7q5Syyj ffmhzlw1dJcjnQC1l5xYejPzXi0kw/eAsr0eQ+aumVjDm/2BV/UJbnQ4Pj+l4lAU b9+K6R+ZxC+XZYE4CZtlT/Jtx2Q8Ncp41XA3ErZSUpEJgFzpWCd+C1u/gYzghoUx X0JaX4XzrUtlCvBw8px/NirG8jy36NqvKnoNLkFS/PUMQ74dcmg= =Xwb2 -----END PGP SIGNATURE----- Merge tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - bus cleanup for warnings and probe deferral errors suppression - cadence recheck for status with a delayed work - intel interrupt rework on reset exit * tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_bus_common: enable interrupts before exiting reset soundwire: cadence: re-check Peripheral status with delayed_work soundwire: bus: clean up probe warnings soundwire: bus: drop unused driver name field soundwire: bus: suppress probe deferral errors |
||
|
Linus Torvalds
|
f34c512521 |
linux-watchdog 6.12-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmbv6AcACgkQ+iyteGJfRsqKdgCgr3VyhlkM+ryZtxnYl02midaC Yp4An2baWN7fzdJWgj11coglnM/mpGvG =J3w7 -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Watchdog Timer driver for RZ/V2H(P) - Add Cirrus EP93x - Some small fixes and improvements * tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Convert comma to semicolon watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error dt-bindings: watchdog: Add Cirrus EP93x dt-bindings: watchdog: stm32-iwdg: Document interrupt and wakeup properties drivers: watchdog: marvell_gti: Convert comma to semicolon watchdog: iTCO_wdt: Convert comma to semicolon watchdog: Add Watchdog Timer driver for RZ/V2H(P) dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC watchdog: imx_sc_wdt: detect if already running watchdog: imx2_wdt: Remove __maybe_unused notations watchdog: imx_sc_wdt: Don't disable WDT in suspend watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature |
||
|
Linus Torvalds
|
962ad08780 |
This is the bulk of pin control changes for the v6.12 kernel cycle:
Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC.
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC.
- Rockchip rk3576 pin control support.
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000.
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton
and a few other drivers.
-----BEGIN PGP SIGNATURE-----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=7uZC
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
|
||
|
Linus Torvalds
|
5f153b6330 |
Bug fixes for intel ntb driver debugfs, use after free in switchtec
driver, ntb transport rx ring buffers. Also, cleanups in printks, kernel-docs, and idt driver comment. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAmbtj00ACgkQbmZLrHqL 0iNH6A/+JzxP8uH8FK4yUM6EFtT03gFZvuhYZ80JnjHWk19mu/zxzdm3uwZ5DZ5h utOz7lHn2mljkq2y+rLTDyZqcpkRQgS1jsGSOdv/NnR6kZ6+siGl01sjYXUbv2+9 eUyyLcq1CksLCqjCEc5WYARo84JIxugDxkEpAS0JZRZSU7DvrvGz0bmuEyLnaFY/ HVi4bwmCS+/m13tJeh2f+OpNZkw8yt/pE8miYsmyJM/YUhFVr7hflOGo0ObtuG15 csvyIx7sPVuRr7ecA6kfcAR6cRf5lMuaW7twuGywU2bnJ5UvQtn2lolB4qR6yg04 L3QYnx/PMUpUe7RhuEmEylib4TistsIRH0+N+YLBnCaeqVF/UM372fo8g6U4iytV AnqAo+YfKNb92i1I+XdlqfT/u/HD+o6bXpbj1H+dxgKHrwqiqLT05TFn9kYCQdz+ sNsE2S8JivqL3MmLlnk57v93CVW3/b5kewsjRwF/NsW2Eb75WCuEbmGi3aDRU20F DRBUxYDR2o15f4aK1jDYA6R7hDO7b6233VNWssNudypKPTCP6L8GRaMiwyiLaz8m 7g2I0f2lmcYPR0FGoLaM+DA3z9a7fM8I5ynkWkbrmOsyZM1aaXMVEj/uvmSkeSHa bpZYQYNrL4g4mwofGH+dGeGtQNkCyLZL1lGhVWDjsoiWl+qWClk= =lFRT -----END PGP SIGNATURE----- Merge tag 'ntb-6.12' of https://github.com/jonmason/ntb Pull PCIe non-transparent bridge updates from Jon Mason: "Bug fixes for intel ntb driver debugfs, use after free in switchtec driver, ntb transport rx ring buffers. Also, cleanups in printks, kernel-docs, and idt driver comment" * tag 'ntb-6.12' of https://github.com/jonmason/ntb: ntb: Force physically contiguous allocation of rx ring buffers ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition ntb: idt: Fix the cacography in ntb_hw_idt.c NTB: epf: don't misuse kernel-doc marker NTB: ntb_transport: fix all kernel-doc warnings ntb: Constify struct bus_type ntb_perf: Fix printk format ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir() |
||
|
Linus Torvalds
|
d7dfb07d4d |
firewire updates for v6.12
The batch of changes includes the followwing:
- Replacing tasklet with usual workqueue for isochronous context
- Replacing IDR with XArray
- Utilizing guard macro where possible
- Printing deprecation warning when enabling debug parameter of
firewire-ohci module
Additionally, it includes a single patch for sound subsystem which the
subsystem maintainer acked:
- Switching to nonatomic PCM operation
In FireWire subsystem, tasklet has been used as the bottom half of 1394
OHCi hardIRQ so long. In the recent kernel updates, BH workqueue has
been available, and some developers have proposed replacing tasklet with
BH workqueue. While it is fortunate that developers are still considering
the legacy subsystem, a simple replacement is not necessarily suitable.
As a first step towards dropping tasklet, I've investigated the
feasibility for 1394 OHCI isochronous context, and concluded that usual
workqueue is available. In the context, the batch of packets is processed
in the specific queue, thus the timing jitter caused by task scheduling is
not so critical. Additionally, DMA transmission can be scheduled
per-packet basis, therefore the context can be sleep between the operation
of transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long. These
characteristics suggest that usual workqueue is suitable, through BH
workqueues are not.
The replacement with usual workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to some
drivers in sound subsystem that spin-lock is not mandatory anymore during
isochronous packet processing.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZu41yQAKCRCsLtaWM8Lw
E4Y1AP43vZatH202NNMnbkLSW9axmHe6VHWEwDSsJT80vTbBNAD/WYV62EoQzlk1
1lzdts11SSqYPhj6tJDuRgqULlNAows=
=7VMx
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"In the FireWire subsystem, tasklets have been used as the bottom half
of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
become available, and some developers have proposed replacing the
tasklet with a BH workqueue.
As a first step towards dropping tasklet use, the 1394 OHCI
isochronous context can use regular workqueues. In this context, the
batch of packets is processed in the specific queue, thus the timing
jitter caused by task scheduling is not so critical.
Additionally, DMA transmission can be scheduled per-packet basis,
therefore the context can be sleep between the operation of
transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long.
These characteristics suggest that normal workqueues are suitable,
through BH workqueues are not.
The replacement with a workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to
some drivers in sound subsystem that spin-lock is not mandatory
anymore during isochronous packet processing.
Summary:
- Replace tasklet with workqueue for isochronous context
- Replace IDR with XArray
- Utilize guard macro where possible
- Print deprecation warning when enabling debug parameter of
firewire-ohci module
- Switch to nonatomic PCM operation"
* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
firewire: core: rename cause flag of tracepoints event
firewire: core: update documentation of kernel APIs for flushing completions
firewire: core: add helper function to retire descriptors
Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
firewire: core: use mutex to coordinate concurrent calls to flush completions
firewire: core: move workqueue handler from 1394 OHCI driver to core function
firewire: core: fulfill documentation of fw_iso_context_flush_completions()
firewire: core: expose kernel API to schedule work item to process isochronous context
firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
ALSA: firewire: use nonatomic PCM operation
firewire: core: non-atomic memory allocation for isochronous event to user client
firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
firewire: core: allocate workqueue to handle isochronous contexts in card
firewire: ohci: obsolete direct usage of printk_ratelimit()
firewire: ohci: deprecate debug parameter
firewire: core: update fw_device outside of device_find_child()
firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
firewire: core/ohci: minor refactoring for computation of configuration ROM size
...
|
||
Guenter Roeck
|
f89722faa3 |
ipe: Add missing terminator to list of unit tests
Add missing terminator to list of unit tests to avoid random crashes seen
when running the test.
Fixes:
|
||
|
Linus Torvalds
|
3a37872316 |
pci-v6.12-changes
-----BEGIN PGP SIGNATURE-----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=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
||
Mike Snitzer
|
736cd2c1ae |
nfs: add "NFS Client and Server Interlock" section to localio.rst
This section answers a new FAQ entry: 9. How does LOCALIO make certain that object lifetimes are managed properly given NFSD and NFS operate in different contexts? See the detailed "NFS Client and Server Interlock" section below. The first half of the section details NeilBrown's elegant design for LOCALIO's nfs_uuid_t based interlock and is heavily based on Neil's "net namespace refcounting" description here: https://marc.info/?l=linux-nfs&m=172498546024767&w=2 The second half of the section details the per-cpu-refcount introduced to ensure NFSD's nfsd_serv isn't destroyed while in use by a LOCALIO client. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
Trond Myklebust
|
f7128262b1 |
nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
Add a FAQ section to give answers to questions that have been raised during review of the localio feature. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Co-developed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Mike Snitzer
|
92945bd81c |
nfs: add Documentation/filesystems/nfs/localio.rst
This document gives an overview of the LOCALIO auxiliary RPC protocol added to the Linux NFS client and server to allow them to reliably handshake to determine if they are on the same host. Once an NFS client and server handshake as "local", the client will bypass the network RPC protocol for read, write and commit operations. Due to this XDR and RPC bypass, these operations will operate faster. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Mike Snitzer
|
56bcd0f07f |
nfs: implement client support for NFS_LOCALIO_PROGRAM
The LOCALIO auxiliary RPC protocol consists of a single "UUID_IS_LOCAL" RPC method that allows the Linux NFS client to verify the local Linux NFS server can see the nonce (single-use UUID) the client generated and made available in nfs_common for subsequent lookup and verification by the NFS server. If matched, the NFS server populates members in the nfs_uuid_t struct. The NFS client then transfers these nfs_uuid_t struct member pointers to the nfs_client struct and cleans up the nfs_uuid_t struct. See: fs/nfs/localio.c:nfs_local_probe() This protocol isn't part of an IETF standard, nor does it need to be considering it is Linux-to-Linux auxiliary RPC protocol that amounts to an implementation detail. Localio is only supported when UNIX-style authentication (AUTH_UNIX, aka AUTH_SYS) is used (enforced by fs/nfs/localio.c:nfs_local_probe()). The UUID_IS_LOCAL method encodes the client generated uuid_t in terms of the fixed UUID_SIZE (16 bytes). The fixed size opaque encode and decode XDR methods are used instead of the less efficient variable sized methods. Having a nonce (single-use uuid) is better than using the same uuid for the life of the server, and sending it proactively by client rather than reactively by the server is also safer. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Co-developed-by: NeilBrown <neilb@suse.de> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Trond Myklebust
|
b9f5dd57f4 |
nfs/localio: use dedicated workqueues for filesystem read and write
For localio access, don't call filesystem read() and write() routines directly. This solves two problems: 1) localio writes need to use a normal (non-memreclaim) unbound workqueue. This avoids imposing new requirements on how underlying filesystems process frontend IO, which would cause a large amount of work to update all filesystems. Without this change, when XFS starts getting low on space, XFS flushes work on a non-memreclaim work queue, which causes a priority inversion problem: 00573 workqueue: WQ_MEM_RECLAIM writeback:wb_workfn is flushing !WQ_MEM_RECLAIM xfs-sync/vdc:xfs_flush_inodes_worker 00573 WARNING: CPU: 6 PID: 8525 at kernel/workqueue.c:3706 check_flush_dependency+0x2a4/0x328 00573 Modules linked in: 00573 CPU: 6 PID: 8525 Comm: kworker/u71:5 Not tainted 6.10.0-rc3-ktest-00032-g2b0a133403ab #18502 00573 Hardware name: linux,dummy-virt (DT) 00573 Workqueue: writeback wb_workfn (flush-0:33) 00573 pstate: 400010c5 (nZcv daIF -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00573 pc : check_flush_dependency+0x2a4/0x328 00573 lr : check_flush_dependency+0x2a4/0x328 00573 sp : ffff0000c5f06bb0 00573 x29: ffff0000c5f06bb0 x28: ffff0000c998a908 x27: 1fffe00019331521 00573 x26: ffff0000d0620900 x25: ffff0000c5f06ca0 x24: ffff8000828848c0 00573 x23: 1fffe00018be0d8e x22: ffff0000c1210000 x21: ffff0000c75fde00 00573 x20: ffff800080bfd258 x19: ffff0000cad63400 x18: ffff0000cd3a4810 00573 x17: 0000000000000000 x16: 0000000000000000 x15: ffff800080508d98 00573 x14: 0000000000000000 x13: 204d49414c434552 x12: 1fffe0001b6eeab2 00573 x11: ffff60001b6eeab2 x10: dfff800000000000 x9 : ffff60001b6eeab3 00573 x8 : 0000000000000001 x7 : 00009fffe491154e x6 : ffff0000db775593 00573 x5 : ffff0000db775590 x4 : ffff0000db775590 x3 : 0000000000000000 00573 x2 : 0000000000000027 x1 : ffff600018be0d62 x0 : dfff800000000000 00573 Call trace: 00573 check_flush_dependency+0x2a4/0x328 00573 __flush_work+0x184/0x5c8 00573 flush_work+0x18/0x28 00573 xfs_flush_inodes+0x68/0x88 00573 xfs_file_buffered_write+0x128/0x6f0 00573 xfs_file_write_iter+0x358/0x448 00573 nfs_local_doio+0x854/0x1568 00573 nfs_initiate_pgio+0x214/0x418 00573 nfs_generic_pg_pgios+0x304/0x480 00573 nfs_pageio_doio+0xe8/0x240 00573 nfs_pageio_complete+0x160/0x480 00573 nfs_writepages+0x300/0x4f0 00573 do_writepages+0x12c/0x4a0 00573 __writeback_single_inode+0xd4/0xa68 00573 writeback_sb_inodes+0x470/0xcb0 00573 __writeback_inodes_wb+0xb0/0x1d0 00573 wb_writeback+0x594/0x808 00573 wb_workfn+0x5e8/0x9e0 00573 process_scheduled_works+0x53c/0xd90 00573 worker_thread+0x370/0x8c8 00573 kthread+0x258/0x2e8 00573 ret_from_fork+0x10/0x20 2) Some filesystem writeback routines can end up taking up a lot of stack space (particularly XFS). Instead of risking running over due to the extra overhead from the NFS stack, we should just call these routines from a workqueue job. Since we need to do this to address 1) above we're able to avoid possibly blowing the stack "for free". Use of dedicated workqueues improves performance over using the system_unbound_wq. Also, the creds used to open the file are used to override_creds() in both nfs_local_call_read() and nfs_local_call_write() -- otherwise the workqueue could have elevated capabilities (which the caller may not). Lastly, care is taken to set PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO in nfs_do_local_write() to avoid writeback deadlocks. The PF_LOCAL_THROTTLE flag prevents deadlocks in balance_dirty_pages() by causing writes to only be throttled against other writes to the same bdi (it keeps the throttling local). Normally all writes to bdi(s) are throttled equally (after throughput factors are allowed for). The PF_MEMALLOC_NOIO flag prevents the lower filesystem IO from causing memory reclaim to re-enter filesystems or IO devices and so prevents deadlocks from occuring where IO that cleans pages is waiting on IO to complete. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Co-developed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Co-developed-by: NeilBrown <neilb@suse.de> Signed-off-by: NeilBrown <neilb@suse.de> # eliminated wait_for_completion Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Trond Myklebust
|
d488b9d01f |
pnfs/flexfiles: enable localio support
If the DS is local to this client use localio to write the data. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Trond Myklebust
|
fa88a7d6ae |
nfs: enable localio for non-pNFS IO
Try a local open of the file being written to, and if it succeeds, then use localio to issue IO. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
Weston Andros Adamson
|
70ba381e1a |
nfs: add LOCALIO support
Add client support for bypassing NFS for localhost reads, writes, and commits. This is only useful when the client and the server are running on the same host. nfs_local_probe() is stubbed out, later commits will enable client and server handshake via a Linux-only LOCALIO auxiliary RPC protocol. This has dynamic binding with the nfsd module (via nfs_localio module which is part of nfs_common). LOCALIO will only work if nfsd is already loaded. The "localio_enabled" nfs kernel module parameter can be used to disable and enable the ability to use LOCALIO support. CONFIG_NFS_LOCALIO enables NFS client support for LOCALIO. Lastly, LOCALIO uses an nfsd_file to initiate all IO. To make proper use of nfsd_file (and nfsd's filecache) its lifetime (duration before nfsd_file_put is called) must extend until after commit, read and write operations. So rather than immediately drop the nfsd_file reference in nfs_local_open_fh(), that doesn't happen until nfs_local_pgio_release() for read/write and not until nfs_local_release_commit_data() for commit. The same applies to the reference held on nfsd's nn->nfsd_serv. Both objects' lifetimes and associated references are managed through calls to nfs_to->nfsd_file_put_local(). Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Co-developed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> # nfs_open_local_fh Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Mike Snitzer
|
df24c483e2 |
nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
The nfsd_file will be passed, in future commits, by callers that enable LOCALIO support (for both regular NFS and pNFS IO). [Derived from patch authored by Weston Andros Adamson, but switched from passing struct file to struct nfsd_file] Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Mike Snitzer
|
946af9b3a0 |
nfsd: implement server support for NFS_LOCALIO_PROGRAM
The LOCALIO auxiliary RPC protocol consists of a single "UUID_IS_LOCAL" RPC method that allows the Linux NFS client to verify the local Linux NFS server can see the nonce (single-use UUID) the client generated and made available in nfs_common. The server expects this protocol to use the same transport as NFS and NFSACL for its RPCs. This protocol isn't part of an IETF standard, nor does it need to be considering it is Linux-to-Linux auxiliary RPC protocol that amounts to an implementation detail. The UUID_IS_LOCAL method encodes the client generated uuid_t in terms of the fixed UUID_SIZE (16 bytes). The fixed size opaque encode and decode XDR methods are used instead of the less efficient variable sized methods. The RPC program number for the NFS_LOCALIO_PROGRAM is 400122 (as assigned by IANA, see https://www.iana.org/assignments/rpc-program-numbers/ ): Linux Kernel Organization 400122 nfslocalio Signed-off-by: Mike Snitzer <snitzer@kernel.org> [neilb: factored out and simplified single localio protocol] Co-developed-by: NeilBrown <neilb@suse.de> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |