Commit Graph

78 Commits

Author SHA1 Message Date
Linus Torvalds
28596c9722 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull "trivial tree" updates from Jiri Kosina:
 "Usual pile from trivial tree everyone is so eagerly waiting for"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Remove MN10300_PROC_MN2WS0038
  mei: fix comments
  treewide: Fix typos in Kconfig
  kprobes: update jprobe_example.c for do_fork() change
  Documentation: change "&" to "and" in Documentation/applying-patches.txt
  Documentation: remove obsolete pcmcia-cs from Changes
  Documentation: update links in Changes
  Documentation: Docbook: Fix generated DocBook/kernel-api.xml
  score: Remove GENERIC_HAS_IOMAP
  gpio: fix 'CONFIG_GPIO_IRQCHIP' comments
  tty: doc: Fix grammar in serial/tty
  dma-debug: modify check_for_stack output
  treewide: fix errors in printk
  genirq: fix reference in devm_request_threaded_irq comment
  treewide: fix synchronize_rcu() in comments
  checkstack.pl: port to AArch64
  doc: queue-sysfs: minor fixes
  init/do_mounts: better syntax description
  MIPS: fix comment spelling
  powerpc/simpleboot: fix comment
  ...
2014-10-07 21:16:26 -04:00
Hayato Suzuki
24488c3920 Documentation: treewide: fix typos and grammar
Correct spelling typo in treewide.

Signed-off-by: Hayato Suzuki <hytszk@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26 09:35:51 +02:00
Roger Quadros
a3e83f05fb ARM: OMAP2+: GPMC: Support Software ECC scheme via DT
For v3.14 and prior, 1-bit Hamming code ECC via software was the
default choice for some boards e.g. 3430sdp.
Commit ac65caf514 in v3.15 changed the behaviour
to use 1-bit Hamming code via Hardware using a different ECC layout
i.e. (ROM code layout) than what is used by software ECC.

This ECC layout change causes NAND filesystems created in v3.14
and prior to be unusable in v3.15 and later. So don't mark "sw" scheme
as deperecated and support it.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-25 16:15:33 -07:00
Lothar Waßmann
2a500afe1e mtd: gpmi: make blockmark swapping optional
With a flash-based BBT there is no reason to move the Factory Bad
Block Marker from the data area buffer (to where it is mapped by the
GPMI NAND controller) to the OOB buffer. Thus, make this feature
configurable via DT. This is required for the Ka-Ro electronics
platforms.

In the original code 'this->swap_block_mark' was synonymous with
'!GPMI_IS_MX23()', so use the latter at the relevant places.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-27 22:06:31 -07:00
Linus Torvalds
e413a19a8e MTD updates for 3.16:
- refactor m25p80.c driver for use as a general SPI NOR framework for other
   drivers which may speak to SPI NOR flash without providing full SPI support
   (i.e., not part of drivers/spi/)
 - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
 - updates for the STMicro "FSM" SPI NOR driver
 - fix sync/flush behavior on mtd_blkdevs
 - fixup subpage write support on a few NAND drivers
 - correct the MTD OOB test for odd-sized OOB areas
 - add BCH-16 support for OMAP NAND
 - fix warnings and trivial refactoring
 - utilize new ECC DT bindings in pxa3xx NAND driver
 - new LPDDR NVM driver
 - address a few assorted bugs caught by Coverity
 - add new imx6sx support for GPMI NAND
 - use a bounce buffer for NAND when non-DMA-able buffers are used
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl/9oAAoJEFySrpd9RFgtfnUP+wURZfF1Xnek/3yNZP0Pt90x
 yToXPDgsK5oteBAAWMUwtnJImDzsUMD8BgLNLU1jvPKuvMo9lwNMaCF+l1wUrTeC
 F1VgYWq4tub3tk104Dthlguk0Jhj66k61LbvFvKXhkGEYGD9iPFeTPWyARUZTYOv
 R4eRybuU+l2ZTDd+vNStXx9oWyqzWXekwrhMi10YWoxF694kBMI4C0rZQ2CexjVl
 B5K0oL2P8JU/yNLgtMgPOfkh8rHZEoXECA3vaQscZzsOnc0evDndKSTkTX1Ls61Y
 eWFgXV6qyhL+5VKTiHNzi6/J0NeNaTquOs9HoBuWr1DwaS8aoWEhBjeuNrXGYs/s
 6++CRoDDcdWunAXBH8hqFSu6IweYB5TQ+QMUa7Z69C9n/fZg82dF4i2RSnp4Y2rs
 qI19LrPIpdyL1ril5ndp0U2JRYXdxOpX3+jf2anG6u3vYjzI8P8tXEGKUz/uNpnK
 fpEn2zKpeHAq62eqScuhGsO7MO2bIg7yNKMdSoeeeT9dgbah6fkrQnaDNbtjC+Y1
 rXMhgLiVebmm8BVe6w5XSFqCw+76RxmO04TAj/Vy3WVPQ2KNn+OuLc0yVlsqAO9n
 7Y19QvHeMZZW4O/w5RQ/OniJpysXN0ESj2cE93DHdgUPQ5aedIN0r5eQA0M1e8c6
 W2MQFS5nJPiCxUYia4KP
 =6UIq
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 - refactor m25p80.c driver for use as a general SPI NOR framework for
   other drivers which may speak to SPI NOR flash without providing full
   SPI support (i.e., not part of drivers/spi/)
 - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
 - updates for the STMicro "FSM" SPI NOR driver
 - fix sync/flush behavior on mtd_blkdevs
 - fixup subpage write support on a few NAND drivers
 - correct the MTD OOB test for odd-sized OOB areas
 - add BCH-16 support for OMAP NAND
 - fix warnings and trivial refactoring
 - utilize new ECC DT bindings in pxa3xx NAND driver
 - new LPDDR NVM driver
 - address a few assorted bugs caught by Coverity
 - add new imx6sx support for GPMI NAND
 - use a bounce buffer for NAND when non-DMA-able buffers are used

* tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
  mtd: gpmi: add gpmi support for imx6sx
  mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
  mtd: bf5xx_nand: use the managed version of kzalloc
  mtd: pxa3xx_nand: make the driver work on big-endian systems
  mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
  mtd: nand: r852: correct write_buf loop bounds
  mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
  mtd: nand_bbt: remove unused variable
  mtd: maps: sc520cdp: fix warnings
  mtd: slram: fix unused variable warning
  mtd: pfow: remove unused variable
  mtd: lpddr: fix Kconfig dependency, for I/O accessors
  mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
  mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
  mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
  mtd: nand: Warn the user if the selected ECC strength is too weak
  mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
  mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
  mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
  mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
  ...
2014-06-11 08:35:34 -07:00
Linus Torvalds
1aacb90eaa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial into next
Pull trivial tree changes from Jiri Kosina:
 "Usual pile of patches from trivial tree that make the world go round"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  staging: go7007: remove reference to CONFIG_KMOD
  aic7xxx: Remove obsolete preprocessor define
  of: dma: doc fixes
  doc: fix incorrect formula to calculate CommitLimit value
  doc: Note need of bc in the kernel build from 3.10 onwards
  mm: Fix printk typo in dmapool.c
  modpost: Fix comment typo "Modules.symvers"
  Kconfig.debug: Grammar s/addition/additional/
  wimax: Spelling s/than/that/, wording s/destinatary/recipient/
  aic7xxx: Spelling s/termnation/termination/
  arm64: mm: Remove superfluous "the" in comment
  of: Spelling s/anonymouns/anonymous/
  dma: imx-sdma: Spelling s/determnine/determine/
  ath10k: Improve grammar in comments
  ath6kl: Spelling s/determnine/determine/
  of: Improve grammar for of_alias_get_id() documentation
  drm/exynos: Spelling s/contro/control/
  radio-bcm2048.c: fix wrong overflow check
  doc: printk-formats: do not mention casts for u64/s64
  doc: spelling error changes
  ...
2014-06-04 08:50:34 -07:00
Ezequiel Garcia
fe4fd75b82 mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
This commit updates the devicetree binding documentation for this driver
with the supported ECC strength and step size combinations.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-21 12:55:09 -07:00
pekon gupta
edf02fb248 mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
- Adds DT binding property for BCH16 ECC scheme
 - Adds describes on factors which determine choice of ECC scheme for particular device

CC: devicetree@vger.kernel.org
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-20 17:52:15 -07:00
Huang Shijie
6e5221558d Documentation: mtd: update the document for m25p80
The m25p80.c has used the SPI NOR framework now, and the m25p_ids has
been moved to spi-nor.c and renamed to spi_nor_ids.

This patch updates the document for m25p80.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-20 16:35:32 -07:00
Carlos Garcia
c98be0c96d doc: spelling error changes
Fixed multiple spelling errors.

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05 15:32:05 +02:00
Huang Shijie
c7a8a11c6b Documentation: add the binding file for Freescale QuadSPI driver
This patch adds the binding file for Freescale QuadSPI driver.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14 11:22:58 -07:00
Lee Jones
e209e1e8e3 mtd: st_spi_fsm: Add device-tree binding documentation
Cc: devicetree@vger.kernel.org
Acked-by Angus Clark <angus.clark@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-20 04:17:16 -07:00
Ezequiel Garcia
8dd49165ef mtd: nand: Add a devicetree binding for ECC strength and ECC step size
Some flashes can only be properly accessed when the ECC mode is
specified, so a way to describe such mode is required.

Together, the ECC strength and step size define the correction capability,
so that we say we will correct "{strength} bit errors per {size} bytes".

The interpretation of these parameters is implementation-defined, but they
often have ramifications on the formation, interpretation, and placement of
correction metadata on the flash. Not all implementations must support all
possible combinations. Implementations are encouraged to further define the
value(s) they support.

Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10 22:42:29 -07:00
Ivan Khoronzhuk
458f3933bb mtd: nand: davinci: reuse driver for Keystone arch
The Keystone arch has compatible nand device, so reuse it.
In case with Keystone it depends on TI_AEMIF because AEMIF
driver is responsible to set timings.

See http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Taras Kondratiuk <taras@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:26 -08:00
Ivan Khoronzhuk
75be1ea26b mtd: nand: davinci: adjust DT properties to MTD generic
The properties davinci-ecc-mode, davinci-nand-use-bbt, davinci-nand-buswidth
are MTD generic. Correct names for them are: nand-ecc-mode, nand-on-flash-bbt,
nand-bus-width accordingly. So rename them in dts and documentation.

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Taras Kondratiuk <taras@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:25 -08:00
Ivan Khoronzhuk
9ba51cff55 mtd: nand: davinci: extend description of bindings
Extend bindings for davinci_nand driver to be more clear.
This is clarification only, without semantic changes.

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Taras Kondratiuk <taras@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:25 -08:00
Ivan Khoronzhuk
c354ae4351 mtd: nand: davinci: move bindings under mtd
Move bindings under mtd. Do this in order to make davinci-nand
driver usable by keystone architecture.

Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Taras Kondratiuk <taras@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:25 -08:00
Ezequiel Garcia
776f265e27 mtd: nand: pxa3xx: Add bad block handling
Add support for flash-based bad block table using Marvell's
custom in-flash bad block table layout. The support is enabled
a 'flash_bbt' platform data or device tree parameter.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:12 -08:00
Ezequiel Garcia
ad58b2d65f mtd: nand: pxa3xx: devicetree binding update
Since the driver supports the new compatible string, the binding
documentation must be updated to reflect it.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:09 -08:00
Huang Shijie
89b59e6cc1 mtd: gpmi: add a new DT property to use the datasheet's minimum required ECC
In default way, we use the ecc_strength/ecc_step size calculated by ourselves
and use all the OOB area.

This patch adds a new property : "fsl,use-minimum-ecc"

If we enable it, we will firstly try to use the datasheet's minimum required
ECC provided by the MTD layer (the ecc_strength_ds/ecc_step_ds fields
in the nand_chip{}). So we may have free space in the OOB area by using the
minimum ECC, and we may support JFFS2 with some SLC NANDs, such as Micron's
SLC NAND.

If we fail to use the minimum ECC, we will use the legacy method to calculate
the ecc_strength and ecc_step size.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03 11:22:08 -08:00
Pekon Gupta
c66d039197 mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
OMAP NAND driver currently supports multiple flavours of 1-bit Hamming
ecc-scheme, like:
- OMAP_ECC_HAMMING_CODE_DEFAULT
	1-bit hamming ecc code using software library
- OMAP_ECC_HAMMING_CODE_HW
	1-bit hamming ecc-code using GPMC h/w engine
- OMAP_ECC_HAMMING_CODE_HW_ROMCODE
	1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible
	to ROM code.

This patch combines above multiple ecc-schemes into single implementation:
- OMAP_ECC_HAM1_CODE_HW
	1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible
	ecc-layout.

Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:07 -08:00
Pekon Gupta
ac65caf514 ARM: OMAP2+: cleaned-up DT support of various ECC schemes
OMAP NAND driver support multiple ECC scheme, which can used in different
flavours, depending on in-build Hardware engines present on SoC.

This patch updates following in DT bindings related to sectionion of ecc-schemes
- ti,elm-id: replaces elm_id (maintains backward compatibility)
- ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme
	depends on ti,elm-id. (supported values ham1, bch4, and bch8)
- maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode)

Below table shows different flavours of ecc-schemes supported by OMAP devices
+---------------------------------------+---------------+---------------+
| ECC scheme                            |ECC calculation|Error detection|
+---------------------------------------+---------------+---------------+
|OMAP_ECC_HAM1_CODE_HW                  |H/W (GPMC)     |S/W            |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W            |
|(requires CONFIG_MTD_NAND_ECC_BCH)     |               |               |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
|(requires CONFIG_MTD_NAND_OMAP_BCH &&  |               |               |
| ti,elm-id in DT)                      |               |               |
+---------------------------------------+---------------+---------------+

To optimize footprint of omap2-nand driver, selection of some ECC schemes
also require enabling following Kconfigs, in addition to setting appropriate
DT bindings
- Kconfig:CONFIG_MTD_NAND_ECC_BCH        error detection done in software
- Kconfig:CONFIG_MTD_NAND_OMAP_BCH       error detection done by h/w engine

Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:07 -08:00
Josh Wu
e79265ba6b mtd: ofpart: add compatible check for child nodes
In case that the nand device will support some features like Nand Flash
Controller, we want to make the sub feature as a sub node of nand device.

Use such organization it is easy to enable/disable feature, also it is back
compatible and more readable.

If the sub-node has a compatible property then it is a driver not partition.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ added a missing newline -Brian ]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 21:12:32 +01:00
Josh Wu
6054d4d563 mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram
This patch enable writing nand flash via NFC SRAM. It will minimize the CPU
overhead. The SRAM write only support ECC_NONE and ECC_HW with PMECC.

To enable this NFC write by SRAM feature, you can add a string in dts under
NFC driver node.

This driver has been tested on SAMA5D3X-EK with JFFS2, YAFFS2, UBIFS and
mtd-utils.

Here is part of mtd_speedtest (writing test) result, compare with non-NFC
writing, it reduces %65 cpu load with loss %12 speed.

- commands use to test:
  # insmod /mnt/mtd_speedtest.ko dev=2 &
  # top -n 30 -d 1 | grep speedtest

- test result:
=================================================
mtd_speedtest: MTD device: 2
mtd_speedtest: MTD device size 41943040, eraseblock size 131072, page size 2048, count of eraseblocks 320, pages per eraseblock 64, OOB size 64
mtd_speedtest: testing eraseblock write speed
  509   495 root     D     1164   0%   7% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%   8% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     R     1164   0%   5% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: eraseblock write speed is 5194 KiB/s
mtd_speedtest: testing page write speed
  509   495 root     D     1164   0%  32% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  27% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  25% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  30% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: page write speed is 5024 KiB/s

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 21:07:51 +01:00
Josh Wu
7dc37de7d5 mtd: atmel_nand: add Nand Flash Controller (NFC) support
Nand Flash Controller (NFC) can handle automatic transfers, sending the
commands and address cycles to the NAND Flash.

To use NFC in this driver, user needs to add NFC child node in nand flash
driver. The NFC child node includes NFC's compatible string and regiters
of the address and size of NFC command registers, NFC registers (embedded
in HSMC) and NFC SRAM.
Also user need to set up the HSMC irq, which use to check whether nfc
command is finish or not.

This driver has been tested on SAMA5D3X-EK board with JFFS2, YAFFS,
UBIFS and mtd-utils.

I put the part of the mtd_speedtest result here for your information.
>From the mtd_speedtest, we can see the NFC will reduce the %50 of cpu load
when writing nand flash. No change when reading.
In the meantime, the speed will be slow about %8.

- commands use to test:
    #insmod /mnt/mtd_speedtest.ko dev=2 &
    #top -n 30 -d 1 | grep speedtest

- test result:

Before the patch:
=================================================
mtd_speedtest: MTD device: 2
mtd_speedtest: MTD device size 41943040, eraseblock size 131072, page size 2048, count of eraseblocks 320, pages per eraseblock 64, OOB size 64
  515   495 root     R     1164   0%  93% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  98% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  99% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: eraseblock write speed is 5768 KiB/s
mtd_speedtest: testing eraseblock read speed
  515   495 root     R     1164   0%  92% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  91% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  94% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: eraseblock read speed is 5932 KiB/s
mtd_speedtest: testing page write speed
  515   495 root     R     1164   0%  94% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  98% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  98% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: page write speed is 5770 KiB/s
mtd_speedtest: testing page read speed
  515   495 root     R     1164   0%  91% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  89% insmod /mnt/mtd_speedtest.ko dev=2
  515   495 root     R     1164   0%  91% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: page read speed is 5910 KiB/s

After the patch:
=================================================
mtd_speedtest: MTD device: 2
mtd_speedtest: MTD device size 41943040, eraseblock size 131072, page size 2048, count of eraseblocks 320, pages per eraseblock 64, OOB size 64
mtd_speedtest: testing eraseblock write speed
  509   495 root     D     1164   0%  49% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  50% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  47% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: eraseblock write speed is 5370 KiB/s
mtd_speedtest: testing eraseblock read speed
  509   495 root     R     1164   0%  92% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     R     1164   0%  91% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     R     1164   0%  95% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: eraseblock read speed is 5715 KiB/s
mtd_speedtest: testing page write speed
  509   495 root     D     1164   0%  48% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  47% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     D     1164   0%  50% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: page write speed is 5224 KiB/s
mtd_speedtest: testing page read speed
  509   495 root     R     1164   0%  89% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     R     1164   0%  94% insmod /mnt/mtd_speedtest.ko dev=2
  509   495 root     R     1164   0%  93% insmod /mnt/mtd_speedtest.ko dev=2
mtd_speedtest: page read speed is 5641 KiB/s

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 21:07:41 +01:00
Josh Wu
1b7192658a mtd: atmel_nand: add a new dt binding item for nand dma support
This patch will set the nand dma support in dts. Since we will not use
cpu_is_xxx() in nand driver. We needn't include the mach/cpu.h any more.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 20:56:15 +01:00
Mian Yousaf Kaukab
64ddba4d8a mtd: nand: fsmc: update of OF support
Add nand bank selection and timings to the device tree bindings.

Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
[Added some documentation]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 20:48:49 +01:00
Mark Jackson
496c8a0bbb ARM: OMAP2+: Allow NAND transfer mode to be specified in DT
OMAP devices support various NAND transfer modes.

Currently all device-tree definitions will use the default "prefetch
polled" mode, so this patch enables the transfer mode to be specified
in the device-tree.

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Acked-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-16 08:53:22 -07:00
Olof Johansson
474dbaa78c Omap fixes for things that were discovered during the merge window:
- Few GPMC fixes and binding doc updates noted after sending
   pull requests for the GPMC branch.
 
 - Board fixes for beagle usb host and rx51 spi probe order
 
 - SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
   handling fixes
 
 Then few minor things that are not strictly fixes but are good
 to get out of the way:
 
 - Add missing legacy mux registers for am/dm73x gpio
 
 - Add detection for am33xx pg2.1 silicon
 
 - Enable twl4030 audio modules in defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRi9KVAAoJEBvUPslcq6VzjVEP/1M0JZWHIgZc8kpeh+uQQFDy
 b3r3/n/4O+gF1lTuP4Zz7xRovqlPKAXqvVaqM4BH8IjTeFSRA+jqeIkC7ut2QUi/
 tOSx6F7PBtPLBJskEoqm/YpyVPvvIpM3imj04JADzxPKlm9lAoCblf7SvCCMT/ep
 oaB3tFIisvL++RNBU+Hiiu12yJUk8uccsVsO9engnbKBnwygVR1rGny6yFqMSPdX
 xcE2EKTZ+oCt0btTqJae8T2OkfxYw1JjPDHLUU4+1lkFq82E1sngRnAWAKktW6ri
 +s5vpc/+50lB3QM/O0zMpLHco0kvFXtdeI7ifhxpMJYklTeidDrmiV/mvIe8J/Jj
 Ey1Q+g4GWywqkGm5C8LbiJfmEyVNH6zANldqNm8GrNQxmo8w9sDvXbBr1kgIpHK+
 k86Lpdp2pDWp9yGnrMXmghPCnMB0md5ePhAdhmw8YGcOP698w9bSPBViXXpi+X3L
 1zTZj82KJUFhvuBxIvO7ZWNSjiZO63HZYiDa1NT6OmzaQO8xI45sO82pMF47Vr9K
 6dmNQT0D9BWW5jvQ1W9nUy8S7ysGkI5yvpbGImHz/4P/xF6hO0rsaSMdzYaCXP0N
 4DZwuf9+Ebi0oLcH3APvb/wMG8vjJJv9tCLB/uNV4eXIIWA6bBzelmNcWVPd4eVo
 2b11r4ESOqxKMpWqJGoK
 =lnij
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap fixes for things that were discovered during the merge window:

- Few GPMC fixes and binding doc updates noted after sending
  pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
  handling fixes

Then few minor things that are not strictly fixes but are good
to get out of the way:

- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig

* tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  ARM: OMAP2+: only WARN if a GPMC child probe function fail
  ARM: OMAP2+: only search for GPMC DT child nodes on probe
  Documentation: dt: update properties in TI GPMC NAND example
  Documentation: dt: update TI GPMC ethernet binding properties

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09 13:13:57 -07:00
Linus Torvalds
a637b0d459 - Lots of cleanups from Artem, including deletion of some obsolete drivers
- Support partitions larger than 4GiB in device tree
 - Support for new SPI chips
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iEYEABECAAYFAlGLxzEACgkQdwG7hYl686M+PgCdHAn3fDzGW7gUL1tj43NCqaC8
 PWoAoNAD5YpI3wYEBxped2MjSfgbQMvq
 =hM2T
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd

Pull MTD update from David Woodhouse:

 - Lots of cleanups from Artem, including deletion of some obsolete
   drivers

 - Support partitions larger than 4GiB in device tree

 - Support for new SPI chips

* tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits)
  mtd: omap2: Use module_platform_driver()
  mtd: bf5xx_nand: Use module_platform_driver()
  mtd: denali_dt: Remove redundant use of of_match_ptr
  mtd: denali_dt: Change return value to fix smatch warning
  mtd: denali_dt: Use module_platform_driver()
  mtd: denali_dt: Fix incorrect error check
  mtd: nand: subpage write support for hardware based ECC schemes
  mtd: omap2: use msecs_to_jiffies()
  mtd: nand_ids: use size macros
  mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
  mtd: add 4 Toshiba nand chips for the full-id case
  mtd: add the support to parse out the full-id nand type
  mtd: add new fields to nand_flash_dev{}
  mtd: sh_flctl: Use of_match_ptr() macro
  mtd: gpio: Use of_match_ptr() macro
  mtd: gpio: Use devm_kzalloc()
  mtd: davinci_nand: Use of_match_ptr()
  mtd: dataflash: Use of_match_ptr() macro
  mtd: remove h720x flash support
  mtd: onenand: remove OneNAND simulator
  ...
2013-05-09 10:15:46 -07:00
Tony Lindgren
a8a07fffe4 Merge branch 'omap-gpmc-fixes-for-v3.10' of git://github.com/jonhunter/linux into fixes 2013-05-08 17:06:39 -07:00
Linus Torvalds
38f56f33ca ARM: arm-soc device tree changes, part 2
These are mostly new device tree bindings for existing drivers, as well
 as changes to the device tree source files to add support for those
 devices, and a couple of new boards, most notably Samsung's Exynos5
 based Chromebook.
 
 The changes depend on earlier platform specific updates and touch
 the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgjh2CrR//JCVInAQJTvRAAmxaeoI+kQ/pbbRDa/Mnhf+bUmQjvJvx4
 uFGYAAi23Txem2Bx6xrfvOo9//ATYSfRxenoSSOtXQucsnrqD0+837Sj2NbO6AB9
 MSiFDK4usJtGwSUybkSHNLb2QPBr8XTgmyWVE/sHEw2UtrIToC1n3sxFofFm0guT
 ReILKsgK0Wjyq5RntnjWOCHNNp6OGqDGvFXlSJqNA7Z6gR/VZy4o0oXS4Sv3TWgF
 zG7ngSG7/u9FP1IQnMr/SxY1T4QS/bBbAC1YvD/7X30DPHrWKR3/3LfLcsc9TUN2
 smTlZQjHdgBbGfVPL7JN0fQwA82HEjNSZKLJ0w9uFjxXgnoKT3znpUpQeuf3dsWm
 BhEFqN1Rf446S4ft2btBSB2nhX4NTlJ7w6z2F65xgaylgYFsGFTYcpjiOurKe3wF
 gGsw31DZdcuI4/LjiWbNGRKbMd7HFFLbFDMJ16TFbNcNr+pM3qpoQ6z3uMbfCBSe
 xFnYr+ESN8F2HXMNLiz3CTqLY+Fi/bHd22n3KuI9qsWws/0KDUrTvFh9Sm3kYji5
 QwwLl6PRoeFw8H29e3KrPsKoY/BGYAvrAetnC1o79cDFPLwUyii/1B6WwzC4ynfs
 K1VhwdVOwnp0sS/a2Pv8sZBpDNI07gwT9P20aiholxgREq2RKNXXVxGGFfK5Qvm9
 FG4Vp6EKEQ0=
 =G60S
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates (part 2) from Arnd Bergmann:
 "These are mostly new device tree bindings for existing drivers, as
  well as changes to the device tree source files to add support for
  those devices, and a couple of new boards, most notably Samsung's
  Exynos5 based Chromebook.

  The changes depend on earlier platform specific updates and touch the
  usual platforms: omap, exynos, tegra, mxs, mvebu and davinci."

* tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: add mshc controller node for Exynos4x12 SoCs
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM/dts: OMAP3: fix pinctrl-single configuration
  ARM: dts: Add OMAP3430 SDP NOR flash memory binding
  ARM: dts: Add NOR flash bindings for OMAP2420 H4
  ...
2013-05-07 11:06:17 -07:00
Jon Hunter
c059e0288c Documentation: dt: update properties in TI GPMC NAND example
The GPMC timing properties for device-tree have been updated
by adding a "-ns" or "-ps" suffix to indicate the units of
time the property represents. Therefore, update the timing
property names for TI GPMC NAND example.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-30 08:42:54 -05:00
Joe Schaack
05ff8c258c mtd: ofpart: support partitions of 4 GiB and larger
Previously, partitions were limited to less than 4 GiB in size because
the address and size were read as 32-bit values. Add support for 64-bit
values to support devices of 4 GiB and larger.

Signed-off-by: Joe Schaack <jschaack@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05 12:05:53 +01:00
Shawn Guo
5fac0e18bd mtd: gpmi: move to use generic DMA helper
With the generic DMA device tree helper supported by mxs-dma driver,
client devices only need to call dma_request_slave_channel() for
requesting a DMA channel from dmaengine.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-04-04 21:22:45 +08:00
Jon Hunter
32cde0b514 ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT
When booting with device-tree, retrieve GPMC settings for ONENAND from
the device-tree blob. This will allow us to remove all static settings
stored in the gpmc-nand.c in the future once the migration to
device-tree is complete.

The user must now specify the ONENAND device width in the device-tree
binding so that the GPMC can be programmed correctly. Therefore, update
the device-tree binding documentation for ONENAND devices connected to
the GPMC to reflect this.

Please note that this does not include GPMC timings for ONENAND. The
timings are being calculated at runtime.

There is some legacy code that only enables read wait monitoring for
non-OMAP3 devices. There are no known OMAP3 device issues that prevent
this feature being enabled and so when booting with device-tree use the
wait-monitoring settings described in the device-tree blob.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:39 -05:00
Jon Hunter
cdd6928c58 ARM: OMAP2+: Add device-tree support for NOR flash
NOR flash is not currently supported when booting with device-tree
on OMAP2+ devices. Add support to detect and configure NOR devices
when booting with device-tree.

Add documentation for the TI GPMC NOR binding.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:38 -05:00
Linus Torvalds
48476df998 Fairly unexciting MTD merge for 3.9:
* misc clean-ups in the MTD command-line partitioning parser (cmdlinepart)
  * add flash locking support for STmicro chips serial flash chips, as well as
    for CFI command set 2 chips.
  * new driver for the ELM error correction HW module found in various TI chips,
    enable the OMAP NAND driver to use the ELM HW error correction
  * added number of new serial flash IDs
  * various fixes and improvements in the gpmi NAND driver
  * bcm47xx NAND driver improvements
  * make the mtdpart module actually removable
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iEYEABECAAYFAlExEs8ACgkQdwG7hYl686Oa+gCgiBNt+I0MiixDeN+MGuE1uw9s
 i2wAniD9sR2HDy6y5SkbdXK/aPr8ez/p
 =xV1l
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd

Pull MTD update from David Woodhouse:
 "Fairly unexciting MTD merge for 3.9:

   - misc clean-ups in the MTD command-line partitioning parser
     (cmdlinepart)
   - add flash locking support for STmicro chips serial flash chips, as
     well as for CFI command set 2 chips.
   - new driver for the ELM error correction HW module found in various
     TI chips, enable the OMAP NAND driver to use the ELM HW error
     correction
   - added number of new serial flash IDs
   - various fixes and improvements in the gpmi NAND driver
   - bcm47xx NAND driver improvements
   - make the mtdpart module actually removable"

* tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits)
  mtd: map: BUG() in non handled cases
  mtd: bcm47xxnflash: use pr_fmt for module prefix in messages
  mtd: davinci_nand: Use managed resources
  mtd: mtd_torturetest can cause stack overflows
  mtd: physmap_of: Convert device allocation to managed devm_kzalloc()
  mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement.
  mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional.
  mtd: atmel_nand: avoid to report an error when lookup table offset is 0.
  mtd: bcm47xxsflash: adjust names of bus-specific functions
  mtd: bcm47xxpart: improve probing of nvram partition
  mtd: bcm47xxpart: add support for other erase sizes
  mtd: bcm47xxnflash: register this as normal driver
  mtd: bcm47xxnflash: fix message
  mtd: bcm47xxsflash: register this as normal driver
  mtd: bcm47xxsflash: write number of written bytes
  mtd: gpmi: add sanity check for the ECC
  mtd: gpmi: set the Golois Field bit for mx6q's BCH
  mtd: devices: elm: Removes <xx> literals in elm DT node
  mtd: gpmi: fix a dereferencing freed memory error
  mtd: fix the wrong timeo for panic_nand_wait()
  ...
2013-03-02 16:33:54 -08:00
Linus Torvalds
a8f3740feb arm-soc: device tree conversions
These are device tree conversions for a number of platforms,
 with the intention of turning code from board files into
 device tree descriptions. Notable changes are:
 
 * davinci bindings for pinctrl, MTD, RTC, watchdog and i2c
 * nomadik bindings for all devices, removing the board files
 * bcm2835 bindings for mmc and i2c
 * tegra bindings for hdmi, keyboard, audio, as well as some updates
 * at91 bindings for hardware ecc and for devices on RM9200
 * mxs bindings for cfa100xx
 * sunxi support for Miniand Hackberry board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyRWCrR//JCVInAQKjPg/6AlHFCcLd2ZNjbp/br9uY9VGDTXC8XBJP
 aIlEIujOi8PZUzyOK+RfAbMtI9EYlFIM1angoQE2x4E8Wf/5bh0zMD1qdsndhceV
 acBGcUug4hv1OBFU+VZNNHu+WzcbiWIwNPXGksIOZpgkYJ+6P2BqVdv/HgwdKiJD
 /Qo5iO6qNeYW387DcVXY5GoDhof56WtsUkb7VrXn5z/ewTq+xu+GuDaAtdsKjHyW
 hjsAjv6BCCf4fKjxGVhePdVqMtTv3pwVQO0B3DuXdNLESecpTobin/jc+oCSY9Yy
 LI21KOjjwYYQahwVsNp2sMcfmbVzeOyHqITF/Qt11OY4YtPbf4OBPM61TDqIYlJ3
 0PoBtm4AL24wiKSCSiQNn6k7woW531r65lqpGOKYoglGYo50gCvxzsBZYkGzpEkV
 7JmUm76Ohppk5QDhO/pIQBFE783IA9rjMg+aPc0SDDwrr499iGBZ2nM7s75MThkm
 EjHpf4O8JYsXj9KANo9D5cL4zupdnH1jm+qhD8zl9w7EBQXJ6zXy38FaUy04Lgr1
 NkHEtwlAeNJ0W6qpu89cNZEaerzeF6uzEFgp06dMwy8X+/NTCLXM1kCJC+mytW83
 aFYDlQedqnXeh9fDCrkbYDA8HGKZm0ENxoLOx40iqF761h8cBfhfCIEObClKhXy2
 mGBl4NF5ZAU=
 =NLEa
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...
2013-02-21 15:38:49 -08:00
Philip Avinash
c80e572c02 mtd: devices: elm: Removes <xx> literals in elm DT node
As part of removing generalized dependency, replace <xx> literal fields
in DT compatible field with <52> for am335x platforms.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04 10:07:11 +02:00
Stefan Roese
1648eaaa15 mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking
Currently cfi_cmdset_0002.c does not support PPB locking of sectors. This
patch adds support for this locking/unlocking mechanism. It is needed on
some platforms, since newer U-Boot versions do support this PPB locking
and protect for example their environment sector(s) this way.

This PPB locking/unlocking will be enabled for all devices supported by
cfi_cmdset_0002 reporting 8 in the CFI word 0x49 (Sector Protect/Unprotect
scheme).

Please note that PPB locking does support sector-by-sector locking. But
the whole chip can only be unlocked together. So unlocking one sector
will automatically unlock all sectors of this device. Because of this
chip limitation, the PPB unlocking function saves the current locking
status of all sectors before unlocking the whole device. After unlocking
the saved locking status is re-configured. This way only the addressed
sectors will be unlocked.

To selectively enable this advanced sector protection mechanism, the
device-tree property "use-advanced-sector-protection" has been created.
To enable support for this locking this property needs to be present in the
flash DT node. E.g.:

nor_flash@0,0 {
	compatible = "amd,s29gl256n", "cfi-flash";
	bank-width = <2>;
	use-advanced-sector-protection;
	...

Tested with Spansion S29GL512S10THI and Micron JS28F512M29EWx flash
devices.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04 09:27:33 +02:00
Philip Avinash
bf22433575 mtd: devices: elm: Add support for ELM error correction
The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme
error correction.
For now only 4 & 8 bit support is added

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04 09:26:29 +02:00
Philip Avinash
97c794a1e3 ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
In case ELM module available, omap2 NAND driver can opt for hardware
correction method for bit flip errors in NAND flash with BCH. Hence the
detection of ELM module is done through devicetree population of elm_id.
This patch update device tree documentation for gpmc-nand for elm-id
data population.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-01 14:32:03 -08:00
Ezequiel Garcia
75d3625e0e ARM: OMAP2+: gpmc: add DT bindings for OneNAND
This patch adds device tree bindings for OMAP OneNAND devices.
Tested on an OMAP3 3430 IGEPv2 board.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-01 14:31:56 -08:00
Linus Walleij
ba78520550 ARM: nomadik: add FSMC NAND
This adds the FSMC NAND driver and flash partitions to the Nomadik
device tree.

The only compatible string accepted by this driver is currently
"st,spear600-fsmc-nand" which is inappropriate for this system, so
this patch adds the compatible value "stericsson,fsmc-nand" as
well.

Cc: linux-mtd@vger.kernel.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28 23:24:36 +01:00
Daniel Mack
bc6b1e7b86 ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
This patch adds basic DT bindings for OMAP GPMC.

The actual peripherals are instantiated from child nodes within the GPMC
node, and the only type of device that is currently supported is NAND.

Code was added to parse the generic GPMC timing parameters and some
documentation with examples on how to use them.

Successfully tested on an AM33xx board.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
[tony@atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-15 14:50:15 -08:00
Jean-Christophe PLAGNIOL-VILLARD
d68cbdd4fb mtd: physmap_of: allow to specify the mtd name for retro compatiblity
linux,mtd-name allow to specify the mtd name for retro capability with
physmap-flash drivers as boot loader pass the mtd partition via the old
device name physmap-flash.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16 10:57:39 +02:00
Bastian Hecht
7c8f680e96 mtd: sh_flctl: Add device tree support
The flctl can now be probed via device tree setup in addition to the
existing platform data way.

SoC specific setup data is set in the .data member of the OF match, so
kept within the driver itself, while board/user specific setup - like
partitioning - is taken from the device tree.

Actual configuration is added for the SoC sh7372.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:50 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d7b42a447 mtd: fsmc_nand: pass the ale and cmd resource via resource
Do not use the platform_data to pass resource and be smart in the drivers.
Just pass it via resource

Switch to devm_request_and_ioremap at the sametime

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-By: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:47 +02:00
Dinh Nguyen
30f9f2fb7b mtd: denali: add a DT driver
Add a device tree version of the Denali NAND driver. Based
on an original patch from Jamie Iles to add a MMIO version
of this driver.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:46 +02:00