1
0
mirror of https://github.com/torvalds/linux.git synced 2024-12-13 22:53:20 +00:00
Commit Graph

18 Commits

Author SHA1 Message Date
Konrad Rzeszutek Wilk
e9daff24a2 Revert "xen PVonHVM: use E820_Reserved area for shared_info"
This reverts commit 9d02b43dee.

We are doing this b/c on 32-bit PVonHVM with older hypervisors
(Xen 4.1) it ends up bothing up the start_info. This is bad b/c
we use it for the time keeping, and the timekeeping code loops
forever - as the version field never changes. Olaf says to
revert it, so lets do that.

Acked-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-14 21:29:31 -05:00
Olaf Hering
9d02b43dee xen PVonHVM: use E820_Reserved area for shared_info
This is a respin of 00e37bdb01
("xen PVonHVM: move shared_info to MMIO before kexec").

Currently kexec in a PVonHVM guest fails with a triple fault because the
new kernel overwrites the shared info page. The exact failure depends on
the size of the kernel image. This patch moves the pfn from RAM into an
E820 reserved memory area.

The pfn containing the shared_info is located somewhere in RAM. This will
cause trouble if the current kernel is doing a kexec boot into a new
kernel. The new kernel (and its startup code) can not know where the pfn
is, so it can not reserve the page. The hypervisor will continue to update
the pfn, and as a result memory corruption occours in the new kernel.

The toolstack marks the memory area FC000000-FFFFFFFF as reserved in the
E820 map. Within that range newer toolstacks (4.3+) will keep 1MB
starting from FE700000 as reserved for guest use. Older Xen4 toolstacks
will usually not allocate areas up to FE700000, so FE700000 is expected
to work also with older toolstacks.

In Xen3 there is no reserved area at a fixed location. If the guest is
started on such old hosts the shared_info page will be placed in RAM. As
a result kexec can not be used.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-02 11:04:01 -04:00
Konrad Rzeszutek Wilk
ca08649eb5 Revert "xen PVonHVM: move shared_info to MMIO before kexec"
This reverts commit 00e37bdb01.

During shutdown of PVHVM guests with more than 2VCPUs on certain
machines we can hit the race where the replaced shared_info is not
replaced fast enough and the PV time clock retries reading the same
area over and over without any any success and is stuck in an
infinite loop.

Acked-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-16 13:05:25 -04:00
Olaf Hering
00e37bdb01 xen PVonHVM: move shared_info to MMIO before kexec
Currently kexec in a PVonHVM guest fails with a triple fault because the
new kernel overwrites the shared info page. The exact failure depends on
the size of the kernel image. This patch moves the pfn from RAM into
MMIO space before the kexec boot.

The pfn containing the shared_info is located somewhere in RAM. This
will cause trouble if the current kernel is doing a kexec boot into a
new kernel. The new kernel (and its startup code) can not know where the
pfn is, so it can not reserve the page. The hypervisor will continue to
update the pfn, and as a result memory corruption occours in the new
kernel.

One way to work around this issue is to allocate a page in the
xen-platform pci device's BAR memory range. But pci init is done very
late and the shared_info page is already in use very early to read the
pvclock. So moving the pfn from RAM to MMIO is racy because some code
paths on other vcpus could access the pfn during the small   window when
the old pfn is moved to the new pfn. There is even a  small window were
the old pfn is not backed by a mfn, and during that time all reads
return -1.

Because it is not known upfront where the MMIO region is located it can
not be used right from the start in xen_hvm_init_shared_info.

To minimise trouble the move of the pfn is done shortly before kexec.
This does not eliminate the race because all vcpus are still online when
the syscore_ops will be called. But hopefully there is no work pending
at this point in time. Also the syscore_op is run last which reduces the
risk further.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19 15:52:05 -04:00
Ian Campbell
03c8142bd2 xen: suspend: add "arch" to pre/post suspend hooks
xen_pre_device_suspend is unused on ia64.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:12 +00:00
Stefano Stabellini
e057a4b6e0 xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2011-02-25 16:43:06 +00:00
Stefano Stabellini
512b109ec9 xen: unplug the emulated devices at resume time
Early after being resumed we need to unplug again the emulated devices.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:40:53 +00:00
Stefano Stabellini
409771d258 x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
Use xen_vcpuop_clockevent instead of hpet and APIC timers as main
clockevent device on all vcpus, use the xen wallclock time as wallclock
instead of rtc and use xen_clocksource as clocksource.
The pv clock algorithm needs to work correctly for the xen_clocksource
and xen wallclock to be usable, only modern Xen versions offer a
reliable pv clock in HVM guests (XENFEAT_hvm_safe_pvclock).

Using the hpet as clocksource means a VMEXIT every time we read/write to
the hpet mmio addresses, pvclock give us a better rating without
VMEXITs. Same goes for the xen wallclock and xen_vcpuop_clockevent

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-26 23:13:25 -07:00
Stefano Stabellini
016b6f5fe8 xen: Add suspend/resume support for PV on HVM guests.
Suspend/resume requires few different things on HVM: the suspend
hypercall is different; we don't need to save/restore memory related
settings; except the shared info page and the callback mechanism.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-22 16:46:21 -07:00
Ian Campbell
cd52e17ea8 xen: ensure timer tick is resumed even on CPU driving the resume
The core suspend/resume code is run from stop_machine on CPU0 but
parts of the suspend/resume machinery (including xen_arch_resume) are
run on whichever CPU happened to schedule the xenwatch kernel thread.

As part of the non-core resume code xen_arch_resume is called in order
to restart the timer tick on non-boot processors. The boot processor
itself is taken care of by core timekeeping code.

xen_arch_resume uses smp_call_function which does not call the given
function on the current processor. This means that we can end up with
one CPU not receiving timer ticks if the xenwatch thread happened to
be scheduled on CPU > 0.

Use on_each_cpu instead of smp_call_function to ensure the timer tick
is resumed everywhere.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Stable Kernel <stable@kernel.org> # .32.x
2010-06-03 09:34:04 +01:00
Ian Campbell
f6eafe3665 xen: call clock resume notifier on all CPUs
tick_resume() is never called on secondary processors. Presumably this
is because they are offlined for suspend on native and so this is
normally taken care of in the CPU onlining path. Under Xen we keep all
CPUs online over a suspend.

This patch papers over the issue for me but I will investigate a more
generic, less hacky, way of doing to the same.

tick_suspend is also only called on the boot CPU which I presume should
be fixed too.

Signed-off-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2009-12-03 11:14:55 -08:00
Ian Campbell
fa24ba62ea xen: correctly restore pfn_to_mfn_list_list after resume
pvops kernels >= 2.6.30 can currently only be saved and restored once. The
second attempt to save results in:

    ERROR Internal error: Frame# in pfn-to-mfn frame list is not in pseudophys
    ERROR Internal error: entry 0: p2m_frame_list[0] is 0xf2c2c2c2, max 0x120000
    ERROR Internal error: Failed to map/save the p2m frame list

I finally narrowed it down to:

    commit cdaead6b4e
        Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
        Date:   Fri Feb 27 15:34:59 2009 -0800

            xen: split construction of p2m mfn tables from registration

            Build the p2m_mfn_list_list early with the rest of the p2m table, but
            register it later when the real shared_info structure is in place.

            Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The unforeseen side-effect of this change was to cause the mfn list list to not
be rebuilt on resume. Prior to this change it would have been rebuilt via
xen_post_suspend() -> xen_setup_shared_info() -> xen_setup_mfn_list_list().

Fix by explicitly calling xen_build_mfn_list_list() from xen_post_suspend().

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:51 -08:00
Ingo Molnar
99d0000f71 x86, xen: fix hardirq.h merge fallout
Impact: build fix

This build error:

 arch/x86/xen/suspend.c:22: error: implicit declaration of function 'fix_to_virt'
 arch/x86/xen/suspend.c:22: error: 'FIX_PARAVIRT_BOOTMAP' undeclared (first use in this function)
 arch/x86/xen/suspend.c:22: error: (Each undeclared identifier is reported only once
 arch/x86/xen/suspend.c:22: error: for each function it appears in.)

triggers because the hardirq.h unification removed an implicit fixmap.h
include - on which arch/x86/xen/suspend.c depended. Add the fixmap.h
include explicitly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 11:09:15 +01:00
Mike Travis
b78936e14e xen: convert to cpumask_var_t and new cpumask primitives.
Simple change, and eventual space saving when NR_CPUS >> nr_cpu_ids.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
2008-12-16 17:40:57 -08:00
Isaku Yamahata
ad55db9fed xen: add xen_arch_resume()/xen_timer_resume hook for ia64 support
add xen_timer_resume() hook.

Timer resume should be done after event channel is resumed.
add xen_arch_resume() hook when ipi becomes usable after resume.
After resume, some cpu specific resource must be reinitialized
on ia64 that can't be set by another cpu.

However available hooks is run once on only one cpu so that ipi has
to be used.

During stop_machine_run() ipi can't be used because interrupt is masked.
So add another hook after stop_machine_run().
Another approach might be use resume hook which is run by
device_resume(). However device_resume() may be executed on
suspend error recovery path.

So it is necessary to determine whether it is executed on real resume path
or error recovery path.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 10:55:50 +02:00
Jeremy Fitzhardinge
d07af1f0e3 xen: resume timers on all vcpus
On resume, the vcpu timer modes will not be restored.  The timer
infrastructure doesn't do this for us, since it assumes the cpus
are offline.  We can just poke the other vcpus into the right mode
directly though.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 13:25:44 +02:00
Jeremy Fitzhardinge
9c7a794209 xen: restore vcpu_info mapping
If we're using vcpu_info mapping, then make sure its restored on all
processors before relasing them from stop_machine.

The only complication is that if this fails, we can't continue because
we've already made assumptions that the mapping is available (baked in
calls to the _direct versions of the functions, for example).

Fortunately this can only happen with a 32-bit hypervisor, which may
possibly run out of mapping space.  On a 64-bit hypervisor, this is a
non-issue.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 13:25:34 +02:00
Jeremy Fitzhardinge
0e91398f2a xen: implement save/restore
This patch implements Xen save/restore and migration.

Saving is triggered via xenbus, which is polled in
drivers/xen/manage.c.  When a suspend request comes in, the kernel
prepares itself for saving by:

1 - Freeze all processes.  This is primarily to prevent any
    partially-completed pagetable updates from confusing the suspend
    process.  If CONFIG_PREEMPT isn't defined, then this isn't necessary.

2 - Suspend xenbus and other devices

3 - Stop_machine, to make sure all the other vcpus are quiescent.  The
    Xen tools require the domain to run its save off vcpu0.

4 - Within the stop_machine state, it pins any unpinned pgds (under
    construction or destruction), performs canonicalizes various other
    pieces of state (mostly converting mfns to pfns), and finally

5 - Suspend the domain

Restore reverses the steps used to save the domain, ending when all
the frozen processes are thawed.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:38 +02:00