Introduce LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET as an IPC scoping
mechanism available since Landlock ABI version 6. Update ruleset_attr,
Landlock ABI version, and access rights code blocks based on that.
Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com>
Link: https://lore.kernel.org/r/ac75151861724c19ed62b500cfe497612d9a6607.1725494372.git.fahimitahera@gmail.com
[mic: Improve commit message and documentation, add a missing
fallthrough, reformat to 80 columns, improve some wording]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The original patch added two columns in the flat-table of Luma-Only
Image Formats, without updating hints to latex: above it. This results
in wrong column count in the output of Sphinx's latex builder.
Fix it.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-media/bdbc27ba-5098-49fb-aabf-753c81361cc7@gmail.com/
Fixes: adb1d4655e ("media: v4l: Add V4L2-PIX-FMT-Y14P format")
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given translation was
last updated.
- A couple of "best practices" suggestions (on Link: tags and off-list
discussions) that were not entirely at consensus level, but I concluded
they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters that have
not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmaZbLMPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y7PkH/jk1LverE9XOXZO5Uq+eEwWlNI2khjQ0hI+M
b0GZlIfeHsted0I8CsYapbehhqve700QJQ8/dmst9jPEwiQq9omSNp8ux/mpIvk+
OjeCLoApZ1slYj9HeiDkwuLDw5o0bKOep6fmrlnnc2uJezqBbjSLmUgocqfCnZb1
fHikvSP0McKjffei76+KH1PYK8BmJwredsHvmfehLJpETHQhe11tO3byPM48iLcy
mybECacqB8zfy7wkvVTWhd+QFkT7x+BE4g/Z07L8z4m9HRxmJbV6EJF1GPlpDJWZ
TV0u86cOAlpMeUy44pfUnej6E9ntafeaHmX7CJpcgskh3h4J/qc=
=uk19
-----END PGP SIGNATURE-----
Merge tag 'docs-6.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
* Fix some typos, incomplete or confusing phrases.
* Split paragraphs where appropriate.
* List the same error code multiple times,
if it has multiple possible causes.
* Bring wording closer to the man page wording,
which has undergone more thorough review
(esp. for LANDLOCK_ACCESS_FS_WRITE_FILE).
* Small semantic clarifications
* Call the ephemeral port range "ephemeral"
* Clarify reasons for EFAULT in landlock_add_rule()
* Clarify @rule_type doc for landlock_add_rule()
This is a collection of small fixes which I collected when preparing the
corresponding man pages [1].
Cc: Alejandro Colomar <alx@kernel.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20240715155554.2791018-1-gnoack@google.com [1]
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240715160328.2792835-2-gnoack@google.com
[mic: Add label to link, fix formatting spotted by make htmldocs,
synchronize userspace-api documentation's date]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
-----BEGIN PGP SIGNATURE-----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=7nBb
-----END PGP SIGNATURE-----
Merge tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor drivers: gc05a2, gc08a3 and imx283
- New serializer/deserializer drivers: max96714 and max96717
- New JPEG encoder driver: e5010
- Support for Raspberry Pi PiSP Backend (BE) ISP driver
- Old documentation for av7110 driver removed, as a new version was
added as Documentation/userspace-api/media/dvb/legacy*.rst
- atompisp: Linux firmwares are now available, so drop firmware-related
task from TODO and update firmware logic
- The imx258 driver has gained several improvements
- wave5 driver has gained support for HEVC decoding
- em28xx gained support for MyGica UTV3
- av7110 budget-patch driver removed
- Lots of other cleanups, improvements and fixes
* tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits)
media: raspberrypi: Switch to remove_new
media: uapi: pisp_be_config: Add extra config fields
media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config
media: uapi: pisp_common: Capitalize all macros
media: uapi: pisp_common: Add 32 bpp format test
media: uapi: pisp_be_config: Drop BIT() from uAPI
media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs
media: atomisp: Fix spelling mistakes in sh_css_sp.c
media: atomisp: Fix spelling mistake in ia_css_debug.c
media: atomisp: Fix spelling mistake in hmm_bo.c
media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c
media: atomisp: Fix spelling mistake in sh_css_internal.h
media: atomisp: Fix spelling mistake "pipline" -> "pipeline"
media: atomisp: Remove unused GPIO related defines and APIs
media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert()
media: atomisp: Clean up unused macros from math_support.h
media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2
media: atomisp: Update TODO
media: atomisp: Prefix firmware paths with "intel/ipu/"
media: atomisp: Remove firmware_name module parameter
...
The user events trace subsystem uses the 0x2A/'*' code for ioctls. These
are published via the uapi/linux/user_events.h header file.
Add a line indicating user events as the owner of the 0x2A/'*' code and
reserve the first 32 sequence numbers.
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240715181413.1157-1-beaub@linux.microsoft.com
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more info
on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core to using
a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
hardware and driving tests of the in-kernel GPIO API from user-space over
debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with regards to
reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop tempting
people to use it
- document the preference for using pread() for reading edge events in the
sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to specify
a number of callbacks callers can use to be notified about irqs being
requested and released
-----BEGIN PGP SIGNATURE-----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=kK88
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Reviewed-by: Srujana Challa <schalla@marvell.com>
Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Documentation/userspace-api/iommu.rst file has become outdated due
to the removal of associated structures and APIs.
Specifically, struct such as iommu_cache_invalidate_info and guest
pasid related uapi were removed in commit 0c9f178778 ("iommu:
Remove guest pasid related interfaces and definitions").
And the corresponding uapi/linux/iommu.h file was removed in
commit 00a9bc6070 ("iommu: Move iommu fault data to
linux/iommu.h").
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702120617.26882-1-mark-pk.tsai@mediatek.com
[will: Remove stale reference to 'iommu' from index.rst]
Signed-off-by: Will Deacon <will@kernel.org>
Update description of reconfiguration rules, adding requirement that a
direction flag be set to enable changing configuration for a line.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-5-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update description of reconfiguration rules, adding requirement that a
direction flag be set or the configuration is considered invalid.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add Raspberry Pi compressed RAW Bayer formats.
The compression algorithm description is provided by Nick Hollinghurst
<nick.hollinghurst@raspberrypi.com> from Raspberry Pi.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add format description for the PiSP Back End configuration parameter
buffer.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Y10P, Y12P and Y14P format variants are packed according to
the RAW10, RAW12 and RAW14 formats as defined by the MIPI CSI-2
specification. Document it.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When MFD_NOEXEC_SEAL was introduced, there was one big mistake: it didn't
have proper documentation. This led to a lot of confusion, especially
about whether or not memfd created with the MFD_NOEXEC_SEAL flag is
sealable. Before MFD_NOEXEC_SEAL, memfd had to explicitly set
MFD_ALLOW_SEALING to be sealable, so it's a fair question.
As one might have noticed, unlike other flags in memfd_create,
MFD_NOEXEC_SEAL is actually a combination of multiple flags. The idea is
to make it easier to use memfd in the most common way, which is NOEXEC +
F_SEAL_EXEC + MFD_ALLOW_SEALING. This works with sysctl vm.noexec to help
existing applications move to a more secure way of using memfd.
Proposals have been made to put MFD_NOEXEC_SEAL non-sealable, unless
MFD_ALLOW_SEALING is set, to be consistent with other flags [1], Those
are based on the viewpoint that each flag is an atomic unit, which is a
reasonable assumption. However, MFD_NOEXEC_SEAL was designed with the
intent of promoting the most secure method of using memfd, therefore a
combination of multiple functionalities into one bit.
Furthermore, the MFD_NOEXEC_SEAL has been added for more than one year,
and multiple applications and distributions have backported and utilized
it. Altering ABI now presents a degree of risk and may lead to
disruption.
MFD_NOEXEC_SEAL is a new flag, and applications must change their code to
use it. There is no backward compatibility problem.
When sysctl vm.noexec == 1 or 2, applications that don't set
MFD_NOEXEC_SEAL or MFD_EXEC will get MFD_NOEXEC_SEAL memfd. And
old-application might break, that is by-design, in such a system vm.noexec
= 0 shall be used. Also no backward compatibility problem.
I propose to include this documentation patch to assist in clarifying the
semantics of MFD_NOEXEC_SEAL, thereby preventing any potential future
confusion.
Finally, I would like to express my gratitude to David Rheinsberg and
Barnabás Pőcze for initiating the discussion on the topic of sealability.
[1]
https://lore.kernel.org/lkml/20230714114753.170814-1-david@readahead.eu/
[jeffxu@chromium.org: updates per Randy]
Link: https://lkml.kernel.org/r/20240611034903.3456796-2-jeffxu@chromium.org
[jeffxu@chromium.org: v3]
Link: https://lkml.kernel.org/r/20240611231409.3899809-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240607203543.2151433-2-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Barnabás Pőcze <pobrn@protonmail.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: David Rheinsberg <david@readahead.eu>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the
same naming scheme as the vast majority of device drivers.
The device tree binding does not fall into binding rename exceptions and
therefore must not be changed. Keep its legacy name.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documentation does not make sufficiently clear that edge polarity is
based on changes to the logical line values, and that the physical
polarity of edges is dependent on the active low flag.
Clarify the relationship between the active low flag and edge polarity
for the functions that read edge events.
Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240610092157.9147-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The documentation does not make sufficiently clear that the uAPI deals with
logical line values, nor does it describe the influence of the active low
flag on the mapping between physical and logical line values.
Clarify the relationship between physical and logical line values and the
effect of the active low flag for ioctls passing line values.
Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240610092157.9147-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZmHG8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGevkH/3YuG9YSP1eo93Da
eQAiwoOtxHsUWh9+2HQYrK5J1s7mCsf9+X2DtKZ3WJ4ZrtiYSvKPNwfG625JMgLb
aLKZFtu2fbijGuRyGM/9o6eZ7ZspZbVTcoCo4RAW1uTzsF8mpIFCp2gpGE7SiTfh
sdXkk3EX6DGrD0oZCu9A1uBBJ8MDB3tCQywnE7ny/X22pze6xCy7CZQWhk4EjOII
zZt8Lukhs1AjJrS9X0DXcFayQB7WB75mx7XvaiqepcXPGb0fUI2TZW5oTlGk9uXD
59KfjWe3Fn4Xp0Z83iLByjVuB+ZceZBD/1B24EqieQLVero3PLdh6B4XHKGKfDU+
C16bWqs=
=4UyN
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rc3'
Linux 6.10-rc3
This is needed for the ipu6 and mei fixes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In legacy sysfs GPIO, when using poll(2) on the sysfs GPIO value for
state change awaiting, a subsequent read(2) is required for consuming
the event, which the doc recommends the use of lseek(2) or
close-and-reopen to reset the file offset afterwards.
The recommendations however, require at least 2 syscalls to consume
the event. Gladly, use of pread(2) require only 1 syscall for the
consumption. Let's advertise this usage by prioritizing its placement.
Signed-off-by: Huichun Feng <foxhoundsk.tw@gmail.com>
Link: https://lore.kernel.org/r/20240609173728.2950808-1-foxhoundsk.tw@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The documentation in one occasion mentions the
VIDIOC_SUBDEV_STREAM_FL_ACTIVE flag. This was meant to be
V4L2_SUBDEV_STREAM_FL_ACTIVE as it's a flag, not an IOCTL. Fix it.
Fixes: cd2c75454d ("media: Documentation: Document S_ROUTING behaviour")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZkYGahAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSaxUBAL1USJI2DUo+hJTDHqXdVZGEE6VfYnmEhIur
NZfsti4UAQCabAej7+NHzh1jAnnKMJFbcyl4LRy99anJGlEWq9ExDA==
=fViz
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings ioctl control to Landlock, contributed by Günther Noack.
This also adds him as a Landlock reviewer, and fixes an issue in the
sample"
* tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
MAINTAINERS: Add Günther Noack as Landlock reviewer
fs/ioctl: Add a comment to keep the logic in sync with LSM policies
MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c
landlock: Document IOCTL support
samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV
selftests/landlock: Exhaustive test for the IOCTL allow-list
selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets
selftests/landlock: Test IOCTLs on named pipes
selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH)
selftests/landlock: Test IOCTL with memfds
selftests/landlock: Test IOCTL support
landlock: Add IOCTL access right for character and block devices
samples/landlock: Fix incorrect free in populate_ruleset_net
-----BEGIN PGP SIGNATURE-----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=JM5r
-----END PGP SIGNATURE-----
Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
In the paragraph above the fallback logic, use the shorter phrasing
from the landlock(7) man page.
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-10-gnoack@google.com
[mic: Update date, and fix redundant "access"]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return the routes set using S_ROUTING back to the user. Also reflect this
in documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document S_ROUTING behaviour for different devices.
Generally in devices that produce streams the streams are static and some
can be enabled and disabled, whereas in devices that just transport them
or write them to memory, more configurability is allowed. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Having extra streams on the source end of the link that cannot be captured
by the sink sub-device generally are not an issue, at least not on CSI-2
bus. Still document that there may be hardware-specific limitations. For
example on parallel bus this might not work on all cases.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Now that metadata mbus formats have been added, it is necessary to define
which fields in struct v4l2_mbus_format are applicable to them (not many).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add generic serial metadata mbus formats. These formats describe data
width and packing but not the content itself. The reason for specifying
such formats is that the formats as such are fairly device specific but
they are still handled by CSI-2 receiver drivers that should not be aware
of device specific formats. What makes generic metadata formats possible
is that these formats are parsed by software only, after capturing the
data to system memory.
Also add a definition for "Data Unit" to cover what is essentially a pixel
but is not image data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add term "stream" to the glossary of the Media subsystem documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The V4L2 subdev crop API has been marked as obsolete, deprecated by the
selection API. Despite this, it has recently been extended with streams
support. In hindsight this was a mistake. Make sure it doesn't happen
again by clearly documenting that no new extensions will be accepted.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The error that V4L2 returns when an attempt is made to open an
unregisted device node is ENODEV, no ENXIO. Update the documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the CEC device is unregistered, then an attempt to open
the device node should result in an -ENODEV error instead of
-ENXIO.
Document this as well in cec-func-open.rst.
This is consistent with the error code returned by other
file operations such as ioctl.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This corresponds to the NT syscall NtCreateSemaphore().
Semaphores are one of three types of object to be implemented in this driver,
the others being mutexes and events.
An NT semaphore contains a 32-bit counter, and is signaled and can be acquired
when the counter is nonzero. The counter has a maximum value which is specified
at creation time. The initial value of the semaphore is also specified at
creation time. There are no restrictions on the maximum and initial value.
Each object is exposed as an file, to which any number of fds may be opened.
When all fds are closed, the object is deleted.
Objects hold a pointer to the ntsync_device that created them. The device's
reference count is driven by struct file.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20240329000621.148791-3-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
