Eric Dumazet implemented Big TCP that allowed bigger TSO/GRO packet sizes
for IPv6 traffic. See patch series:
'commit 89527be8d8 ("net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes")'
This reduces the number of packets traversing the networking stack and
should usually improves performance. However, it also inserts a
temporary Hop-by-hop IPv6 extension header.
Using the HBH header removal method in the previous patch, the extra header
be removed in bnxt drivers to allow it to send big TCP packets (bigger
TSO packets) as well.
Tested:
Compiled locally
To further test functional correctness, update the GSO/GRO limit on the
physical NIC:
ip link set eth0 gso_max_size 181000
ip link set eth0 gro_max_size 181000
Note that if there are bonding or ipvan devices on top of the physical
NIC, their GSO sizes need to be updated as well.
Then, IPv6/TCP packets with sizes larger than 64k can be observed.
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20221210041646.3587757-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6/TCP and GRO stacks can build big TCP packets with an added
temporary Hop By Hop header.
Is GSO is not involved, then the temporary header needs to be removed in
the driver. This patch provides a generic helper for drivers that need
to modify their headers in place.
Tested:
Compiled and ran with ethtool -K eth1 tso off
Could send Big TCP packets
Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20221210041646.3587757-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Implement persistent user-requested affinity: introduce affinity_context::user_mask
and unconditionally preserve the user-requested CPU affinity masks, for long-lived
tasks to better interact with cpusets & CPU hotplug events over longer timespans,
without destroying the original affinity intent if the underlying topology changes.
- Uclamp updates: fix relationship between uclamp and fits_capacity()
- PSI fixes
- Misc fixes & updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aao/
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Implement persistent user-requested affinity: introduce
affinity_context::user_mask and unconditionally preserve the
user-requested CPU affinity masks, for long-lived tasks to better
interact with cpusets & CPU hotplug events over longer timespans,
without destroying the original affinity intent if the underlying
topology changes.
- Uclamp updates: fix relationship between uclamp and fits_capacity()
- PSI fixes
- Misc fixes & updates
* tag 'sched-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clear ttwu_pending after enqueue_task()
sched/psi: Use task->psi_flags to clear in CPU migration
sched/psi: Stop relying on timer_pending() for poll_work rescheduling
sched/psi: Fix avgs_work re-arm in psi_avgs_work()
sched/psi: Fix possible missing or delayed pending event
sched: Always clear user_cpus_ptr in do_set_cpus_allowed()
sched: Enforce user requested affinity
sched: Always preserve the user requested cpumask
sched: Introduce affinity_context
sched: Add __releases annotations to affine_move_task()
sched/fair: Check if prev_cpu has highest spare cap in feec()
sched/fair: Consider capacity inversion in util_fits_cpu()
sched/fair: Detect capacity inversion
sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition
sched/uclamp: Make cpu_overutilized() use util_fits_cpu()
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
sched/uclamp: Fix fits_capacity() check in feec()
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
sched/uclamp: Fix relationship between uclamp and migration margin
Ido Schimmel says:
====================
bridge: mcast: Extensions for EVPN
tl;dr
=====
This patchset creates feature parity between user space and the kernel
and allows the former to install and replace MDB port group entries with
a source list and associated filter mode. This is required for EVPN use
cases where multicast state is not derived from snooped IGMP/MLD
packets, but instead derived from EVPN routes exchanged by the control
plane in user space.
Background
==========
IGMPv3 [1] and MLDv2 [2] differ from earlier versions of the protocols
in that they add support for source-specific multicast. That is, hosts
can advertise interest in listening to a particular multicast address
only from specific source addresses or from all sources except for
specific source addresses.
In kernel 5.10 [3][4], the bridge driver gained the ability to snoop
IGMPv3/MLDv2 packets and install corresponding MDB port group entries.
For example, a snooped IGMPv3 Membership Report that contains a single
MODE_IS_EXCLUDE record for group 239.10.10.10 with sources 192.0.2.1,
192.0.2.2, 192.0.2.20 and 192.0.2.21 would trigger the creation of these
entries:
# bridge -d mdb show
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.21 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.20 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.2 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 src 192.0.2.1 temp filter_mode include proto kernel blocked
dev br0 port veth1 grp 239.10.10.10 temp filter_mode exclude source_list 192.0.2.21/0.00,192.0.2.20/0.00,192.0.2.2/0.00,192.0.2.1/0.00 proto kernel
While the kernel can install and replace entries with a filter mode and
source list, user space cannot. It can only add EXCLUDE entries with an
empty source list, which is sufficient for IGMPv2/MLDv1, but not for
IGMPv3/MLDv2.
Use cases where the multicast state is not derived from snooped packets,
but instead derived from routes exchanged by the user space control
plane require feature parity between user space and the kernel in terms
of MDB configuration. Such a use case is detailed in the next section.
Motivation
==========
RFC 7432 [5] defines a "MAC/IP Advertisement route" (type 2) [6] that
allows NVE switches in the EVPN network to advertise and learn
reachability information for unicast MAC addresses. Traffic destined to
a unicast MAC address can therefore be selectively forwarded to a single
NVE switch behind which the MAC is located.
The same is not true for IP multicast traffic. Such traffic is simply
flooded as BUM to all NVE switches in the broadcast domain (BD),
regardless if a switch has interested receivers for the multicast stream
or not. This is especially problematic for overlay networks that make
heavy use of multicast.
The issue is addressed by RFC 9251 [7] that defines a "Selective
Multicast Ethernet Tag Route" (type 6) [8] which allows NVE switches in
the EVPN network to advertise multicast streams that they are interested
in. This is done by having each switch suppress IGMP/MLD packets from
being transmitted to the NVE network and instead communicate the
information over BGP to other switches.
As far as the bridge driver is concerned, the above means that the
multicast state (i.e., {multicast address, group timer, filter-mode,
(source records)}) for the VXLAN bridge port is not populated by the
kernel from snooped IGMP/MLD packets (they are suppressed), but instead
by user space. Specifically, by the routing daemon that is exchanging
EVPN routes with other NVE switches.
Changes are obviously also required in the VXLAN driver, but they are
the subject of future patchsets. See the "Future work" section.
Implementation
==============
The user interface is extended to allow user space to specify the filter
mode of the MDB port group entry and its source list. Replace support is
also added so that user space would not need to remove an entry and
re-add it only to edit its source list or filter mode, as that would
result in packet loss. Example usage:
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent \
source_list 192.0.2.1,192.0.2.3 filter_mode exclude proto zebra
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude source_list 192.0.2.3/0.00,192.0.2.1/0.00 proto zebra 0.00
The netlink interface is extended with a few new attributes in the
RTM_NEWMDB request message:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_SET_ENTRY ]
struct br_mdb_entry
[ MDBA_SET_ENTRY_ATTRS ]
[ MDBE_ATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBE_ATTR_SRC_LIST ] // new
[ MDBE_SRC_LIST_ENTRY ]
[ MDBE_SRCATTR_ADDRESS ]
struct in_addr / struct in6_addr
[ ...]
[ MDBE_ATTR_GROUP_MODE ] // new
u8
[ MDBE_ATTR_RTPORT ] // new
u8
No changes are required in RTM_NEWMDB responses and notifications, as
all the information can already be dumped by the kernel today.
Testing
=======
Tested with existing bridge multicast selftests: bridge_igmp.sh,
bridge_mdb_port_down.sh, bridge_mdb.sh, bridge_mld.sh,
bridge_vlan_mcast.sh.
In addition, added many new test cases for existing as well as for new
MDB functionality.
Patchset overview
=================
Patches #1-#8 are non-functional preparations for the core changes in
later patches.
Patches #9-#10 allow user space to install (*, G) entries with a source
list and associated filter mode. Specifically, patch #9 adds the
necessary kernel plumbing and patch #10 exposes the new functionality to
user space via a few new attributes.
Patch #11 allows user space to specify the routing protocol of new MDB
port group entries so that a routing daemon could differentiate between
entries installed by it and those installed by an administrator.
Patch #12 allows user space to replace MDB port group entries. This is
useful, for example, when user space wants to add a new source to a
source list. Instead of deleting a (*, G) entry and re-adding it with an
extended source list (which would result in packet loss), user space can
simply replace the current entry.
Patches #13-#14 add tests for existing MDB functionality as well as for
all new functionality added in this patchset.
Future work
===========
The VXLAN driver will need to be extended with an MDB so that it could
selectively forward IP multicast traffic to NVE switches with interested
receivers instead of simply flooding it to all switches as BUM.
The idea is to reuse the existing MDB interface for the VXLAN driver in
a similar way to how the FDB interface is shared between the bridge and
VXLAN drivers.
From command line perspective, configuration will look as follows:
# bridge mdb add dev br0 port vxlan0 grp 239.1.1.1 permanent \
filter_mode exclude source_list 198.50.100.1,198.50.100.2
# bridge mdb add dev vxlan0 port vxlan0 grp 239.1.1.1 permanent \
filter_mode include source_list 198.50.100.3,198.50.100.4 \
dst 192.0.2.1 dst_port 4789 src_vni 2
# bridge mdb add dev vxlan0 port vxlan0 grp 239.1.1.1 permanent \
filter_mode exclude source_list 198.50.100.1,198.50.100.2 \
dst 192.0.2.2 dst_port 4789 src_vni 2
Where the first command is enabled by this set, but the next two will be
the subject of future work.
From netlink perspective, the existing PF_BRIDGE/RTM_*MDB messages will
be extended to the VXLAN driver. This means that a few new attributes
will be added (e.g., 'MDBE_ATTR_SRC_VNI') and that the handlers for
these messages will need to move to net/core/rtnetlink.c. The rtnetlink
code will call into the appropriate driver based on the ifindex
specified in the ancillary header.
iproute2 patches can be found here [9].
Changelog
=========
Since v1 [10]:
* Patch #12: Remove extack from br_mdb_replace_group_sg().
* Patch #12: Change 'nlflags' to u16 and move it after 'filter_mode' to
pack the structure.
Since RFC [11]:
* Patch #6: New patch.
* Patch #9: Use an array instead of a list to store source entries.
* Patch #10: Use an array instead of list to store source entries.
* Patch #10: Drop br_mdb_config_attrs_fini().
* Patch #11: Reject protocol for host entries.
* Patch #13: New patch.
* Patch #14: New patch.
[1] https://datatracker.ietf.org/doc/html/rfc3376
[2] https://www.rfc-editor.org/rfc/rfc3810
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6af52ae2ed14a6bc756d5606b29097dfd76740b8
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=68d4fd30c83b1b208e08c954cd45e6474b148c87
[5] https://datatracker.ietf.org/doc/html/rfc7432
[6] https://datatracker.ietf.org/doc/html/rfc7432#section-7.2
[7] https://datatracker.ietf.org/doc/html/rfc9251
[8] https://datatracker.ietf.org/doc/html/rfc9251#section-9.1
[9] https://github.com/idosch/iproute2/commits/submit/mdb_v1
[10] https://lore.kernel.org/netdev/20221208152839.1016350-1-idosch@nvidia.com/
[11] https://lore.kernel.org/netdev/20221018120420.561846-1-idosch@nvidia.com/
====================
Link: https://lore.kernel.org/r/20221210145633.1328511-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftests that includes the following test cases:
1. Configuration tests. Both valid and invalid configurations are
tested across all entry types (e.g., L2, IPv4).
2. Forwarding tests. Both host and port group entries are tested across
all entry types.
3. Interaction between user installed MDB entries and IGMP / MLD control
packets.
Example output:
INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4) [ OK ]
TEST: Common host entries configuration tests (IPv6) [ OK ]
TEST: Common host entries configuration tests (L2) [ OK ]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
INFO: # Port group entries configuration tests - (S, G)
TEST: Common port group entries configuration tests (IPv4 (S, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (S, G)) [ OK ]
TEST: IPv4 (S, G) port group entries configuration tests [ OK ]
TEST: IPv6 (S, G) port group entries configuration tests [ OK ]
INFO: # Port group entries configuration tests - L2
TEST: Common port group entries configuration tests (L2 (*, G)) [ OK ]
TEST: L2 (*, G) port group entries configuration tests [ OK ]
INFO: # Forwarding tests
TEST: IPv4 host entries forwarding tests [ OK ]
TEST: IPv6 host entries forwarding tests [ OK ]
TEST: L2 host entries forwarding tests [ OK ]
TEST: IPv4 port group "exclude" entries forwarding tests [ OK ]
TEST: IPv6 port group "exclude" entries forwarding tests [ OK ]
TEST: IPv4 port group "include" entries forwarding tests [ OK ]
TEST: IPv6 port group "include" entries forwarding tests [ OK ]
TEST: L2 port entries forwarding tests [ OK ]
INFO: # Control packets tests
TEST: IGMPv3 MODE_IS_INCLUE tests [ OK ]
TEST: MLDv2 MODE_IS_INCLUDE tests [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is only concerned with host MDB entries and not with MDB
entries as a whole. Rename the test to reflect that.
Subsequent patches will add a more general test that will contain the
test cases for host MDB entries and remove the current test.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that user space can specify additional attributes of port group
entries such as filter mode and source list, it makes sense to allow
user space to atomically modify these attributes by replacing entries
instead of forcing user space to delete the entries and add them back.
Replace MDB port group entries when the 'NLM_F_REPLACE' flag is
specified in the netlink message header.
When a (*, G) entry is replaced, update the following attributes: Source
list, state, filter mode, protocol and flags. If the entry is temporary
and in EXCLUDE mode, reset the group timer to the group membership
interval. If the entry is temporary and in INCLUDE mode, reset the
source timers of associated sources to the group membership interval.
Examples:
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent source_list 192.0.2.1,192.0.2.2 filter_mode include
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.2 permanent filter_mode include proto static 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto static 0.00
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode include source_list 192.0.2.2/0.00,192.0.2.1/0.00 proto static 0.00
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent source_list 192.0.2.1,192.0.2.3 filter_mode exclude proto zebra
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra blocked 0.00
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude source_list 192.0.2.3/0.00,192.0.2.1/0.00 proto zebra 0.00
# bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 temp source_list 192.0.2.4,192.0.2.3 filter_mode include proto bgp
# bridge -d -s mdb show
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.4 temp filter_mode include proto bgp 0.00
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 temp filter_mode include proto bgp 0.00
dev br0 port dummy10 grp 239.1.1.1 temp filter_mode include source_list 192.0.2.4/259.44,192.0.2.3/259.44 proto bgp 0.00
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the 'MDBE_ATTR_RTPORT' attribute to allow user space to specify the
routing protocol of the MDB port group entry. Enforce a minimum value of
'RTPROT_STATIC' to prevent user space from using protocol values that
should only be set by the kernel (e.g., 'RTPROT_KERNEL'). Maintain
backward compatibility by defaulting to 'RTPROT_STATIC'.
The protocol is already visible to user space in RTM_NEWMDB responses
and notifications via the 'MDBA_MDB_EATTR_RTPROT' attribute.
The routing protocol allows a routing daemon to distinguish between
entries configured by it and those configured by the administrator. Once
MDB flush is supported, the protocol can be used as a criterion
according to which the flush is performed.
Examples:
# bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto kernel
Error: integer out of range.
# bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto static
# bridge mdb add dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent proto zebra
# bridge mdb add dev br0 port dummy10 grp 239.1.1.2 permanent source_list 198.51.100.1,198.51.100.2 filter_mode include proto 250
# bridge -d mdb show
dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.2 permanent filter_mode include proto 250
dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.1 permanent filter_mode include proto 250
dev br0 port dummy10 grp 239.1.1.2 permanent filter_mode include source_list 198.51.100.2/0.00,198.51.100.1/0.00 proto 250
dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra
dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude proto static
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new netlink attributes to the RTM_NEWMDB request that allow user
space to add (*, G) with a source list and filter mode.
The RTM_NEWMDB message can already dump such entries (created by the
kernel) so there is no need to add dump support. However, the message
contains a different set of attributes depending if it is a request or a
response. The naming and structure of the new attributes try to follow
the existing ones used in the response.
Request:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_SET_ENTRY ]
struct br_mdb_entry
[ MDBA_SET_ENTRY_ATTRS ]
[ MDBE_ATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBE_ATTR_SRC_LIST ] // new
[ MDBE_SRC_LIST_ENTRY ]
[ MDBE_SRCATTR_ADDRESS ]
struct in_addr / struct in6_addr
[ ...]
[ MDBE_ATTR_GROUP_MODE ] // new
u8
Response:
[ struct nlmsghdr ]
[ struct br_port_msg ]
[ MDBA_MDB ]
[ MDBA_MDB_ENTRY ]
[ MDBA_MDB_ENTRY_INFO ]
struct br_mdb_entry
[ MDBA_MDB_EATTR_TIMER ]
u32
[ MDBA_MDB_EATTR_SOURCE ]
struct in_addr / struct in6_addr
[ MDBA_MDB_EATTR_RTPROT ]
u8
[ MDBA_MDB_EATTR_SRC_LIST ]
[ MDBA_MDB_SRCLIST_ENTRY ]
[ MDBA_MDB_SRCATTR_ADDRESS ]
struct in_addr / struct in6_addr
[ MDBA_MDB_SRCATTR_TIMER ]
u8
[...]
[ MDBA_MDB_EATTR_GROUP_MODE ]
u8
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for allowing user space to add (*, G) entries with a
source list and associated filter mode, add the necessary plumbing to
handle such requests.
Extend the MDB configuration structure with a currently empty source
array and filter mode that is currently hard coded to EXCLUDE.
Add the source entries and the corresponding (S, G) entries before
making the new (*, G) port group entry visible to the data path.
Handle the creation of each source entry in a similar fashion to how it
is created from the data path in response to received Membership
Reports: Create the source entry, arm the source timer (if needed), add
a corresponding (S, G) forwarding entry and finally mark the source
entry as installed (by user space).
Add the (S, G) entry by populating an MDB configuration structure and
calling br_mdb_add_group_sg() as if a new entry is created by user
space, with the sole difference that the 'src_entry' field is set to
make sure that the group timer of such entries is never armed.
Note that it is not currently possible to add more than 32 source
entries to a port group entry. If this proves to be a problem we can
either increase 'PG_SRC_ENT_LIMIT' or avoid forcing a limit on entries
created by user space.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User space will soon be able to install a (*, G) with a source list,
prompting the creation of a (S, G) entry for each source.
In this case, the group timer of the (S, G) entry should never be set.
Solve this by adding a new field to the MDB configuration structure that
denotes whether the (S, G) corresponds to a source or not.
The field will be set in a subsequent patch where br_mdb_add_group_sg()
is called in order to create a (S, G) entry for each user provided
source.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a few places where the bridge driver differentiates between
(S, G) entries installed by the kernel (in response to Membership
Reports) and those installed by user space. One of them is when deleting
an (S, G) entry corresponding to a source entry that is being deleted.
While user space cannot currently add a source entry to a (*, G), it can
add an (S, G) entry that later corresponds to a source entry created by
the reception of a Membership Report. If this source entry is later
deleted because its source timer expired or because the (*, G) entry is
being deleted, the bridge driver will not delete the corresponding (S,
G) entry if it was added by user space as permanent.
This is going to be a problem when the ability to install a (*, G) with
a source list is exposed to user space. In this case, when user space
installs the (*, G) as permanent, then all the (S, G) entries
corresponding to its source list will also be installed as permanent.
When user space deletes the (*, G), all the source entries will be
deleted and the expectation is that the corresponding (S, G) entries
will be deleted as well.
Solve this by introducing a new source entry flag denoting that the
entry was installed by user space. When the entry is deleted, delete the
corresponding (S, G) entry even if it was installed by user space as
permanent, as the flag tells us that it was installed in response to the
source entry being created.
The flag will be set in a subsequent patch where source entries are
created in response to user requests.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose __br_multicast_del_group_src() which is symmetric to
br_multicast_new_group_src() and does not remove the installed {S, G}
forwarding entry, unlike br_multicast_del_group_src().
The function will be used in the error path when user space was able to
add a new source entry, but failed to install a corresponding forwarding
entry.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, new group source entries are only created in response to
received Membership Reports. Subsequent patches are going to allow user
space to install (*, G) entries with a source list.
As a preparatory step, expose br_multicast_new_group_src() so that it
could later be invoked from the MDB code (i.e., br_mdb.c) that handles
RTM_NEWMDB messages.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subsequent patches will add memory allocations in br_mdb_config_init()
as the MDB configuration structure will include a linked list of source
entries. This memory will need to be freed regardless if br_mdb_add()
succeeded or failed.
As a preparation for this change, add a centralized error path where the
memory will be freed.
Note that br_mdb_del() already has one error path and therefore does not
require any changes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subsequent patches are going to add additional validation functions and
netlink policies. Some of these functions will need to perform parsing
using nla_parse_nested() and the new policies.
In order to keep all the policies next to each other, move the current
policy to before the validation functions.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the bridge is using IGMP version 3 or MLD version 2, it handles the
addition of (*, G) and (S, G) entries differently.
When a new (S, G) port group entry is added, all the (*, G) EXCLUDE
ports need to be added to the port group of the new entry. Similarly,
when a new (*, G) EXCLUDE port group entry is added, the port needs to
be added to the port group of all the matching (S, G) entries.
Subsequent patches will create more differences between both entry
types. Namely, filter mode and source list can only be specified for (*,
G) entries.
Given the current and future differences between both entry types,
handle the addition of each entry type in a different function, thereby
avoiding the creation of one complex function.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the filter mode (i.e., INCLUDE / EXCLUDE) of MDB entries
cannot be set from user space. Instead, it is set by the kernel
according to the entry type: (*, G) entries are treated as EXCLUDE and
(S, G) entries are treated as INCLUDE. This allows the kernel to derive
the entry type from its filter mode.
Subsequent patches will allow user space to set the filter mode of (*,
G) entries, making the current assumption incorrect.
As a preparation, remove the current assumption and instead determine
the entry type from its key, which is a more direct way.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.
Fixes: 328621f613 ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for NETIF_F_LOOPBACK. This feature can be set via:
$ ethtool -K eth0 loopback <on|off>
This sets the MAC Tx->Rx loopback.
This feature is used for the xsk selftests, and might have other uses
too.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221209185553.2520088-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.
Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.
Fixes: 613142b0bb ("i40e: Log error for oversized MTU on device")
Fixes: 0c8493d90b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.com>
Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Thoroughly rewrite the data structures that implement perf task context handling,
with the goal of fixing various quirks and unfeatures both in already merged,
and in upcoming proposed code.
The old data structure is the per task and per cpu perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and
a single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd27568117 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology discovery
on various hardware models.
- Misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KNaI
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Thoroughly rewrite the data structures that implement perf task
context handling, with the goal of fixing various quirks and
unfeatures both in already merged, and in upcoming proposed code.
The old data structure is the per task and per cpu
perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and a
single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd27568117 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology
discovery on various hardware models.
- Misc fixes & cleanups
* tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
perf/x86/intel/uncore: Make set_mapping() procedure void
perf/x86/intel/uncore: Update sysfs-devices-mapping file
perf/x86/intel/uncore: Enable UPI topology discovery for Sapphire Rapids
perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server
perf/x86/intel/uncore: Get UPI NodeID and GroupID
perf/x86/intel/uncore: Enable UPI topology discovery for Skylake Server
perf/x86/intel/uncore: Generalize get_topology() for SKX PMUs
perf/x86/intel/uncore: Disable I/O stacks to PMU mapping on ICX-D
perf/x86/intel/uncore: Clear attr_update properly
perf/x86/intel/uncore: Introduce UPI topology type
perf/x86/intel/uncore: Generalize IIO topology support
perf/core: Don't allow grouping events from different hw pmus
perf/amd/ibs: Make IBS a core pmu
perf: Fix function pointer case
perf/x86/amd: Remove the repeated declaration
perf: Fix possible memleak in pmu_dev_alloc()
...
Xin Long says:
====================
net: add IFF_NO_ADDRCONF to prevent ipv6 addrconf
This patchset adds IFF_NO_ADDRCONF flag for dev->priv_flags
to prevent ipv6 addrconf, as Jiri Pirko's suggestion.
For Bonding it changes to use this flag instead of IFF_SLAVE
flag in Patch 1, and for Teaming and Net Failover it sets
this flag before calling dev_open() in Patch 2 and 3.
====================
Link: https://lore.kernel.org/r/cover.1670599241.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to Bonding and Team, to prevent ipv6 addrconf with
IFF_NO_ADDRCONF in slave_dev->priv_flags for slave ports
is also needed in net failover.
Note that dev_open(slave_dev) is called in .slave_register,
which is called after the IFF_NO_ADDRCONF flag is set in
failover_slave_register().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf
for Team port. This flag will be set in team_port_enter(), which
is called before dev_open(), and cleared in team_port_leave(),
called after dev_close() and the err path in team_port_add().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in bonding it reused the IFF_SLAVE flag and checked it
in ipv6 addrconf to prevent ipv6 addrconf.
However, it is not a proper flag to use for no ipv6 addrconf, for
bonding it has to move IFF_SLAVE flag setting ahead of dev_open()
in bond_enslave(). Also, IFF_MASTER/SLAVE are historical flags
used in bonding and eql, as Jiri mentioned, the new devices like
Team, Failover do not use this flag.
So as Jiri suggested, this patch adds IFF_NO_ADDRCONF in priv_flags
of the device to indicate no ipv6 addconf, and uses it in bonding
and moves IFF_SLAVE flag setting back to its original place.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().
Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.
[ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[ 95.095964] dwmac1000: Master AXI performs any burst length
[ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[ 95.109428] Division by zero in kernel.
[ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[ 95.123686] Hardware name: Altera SOCFPGA
[ 95.127695] unwind_backtrace from show_stack+0x10/0x14
[ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c
[ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10
[ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18
[ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[ 95.171117] __stmmac_open from stmmac_open+0x30/0x44
[ 95.176182] stmmac_open from __dev_open+0x11c/0x134
[ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c
[ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50
[ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604
[ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214
[ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4
[ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38
[ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844
[ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c
[ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Fixes: 91a2559c1d ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mcs_register_interrupts(), a call to request_irq() is not balanced by a
corresponding free_irq(), neither in the error handling path, nor in the
remove function.
Add the missing calls.
Fixes: 6c635f78c4 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69f153db5152a141069f990206e7389f961d41ec.1670693669.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current DSA maintainers are Florian Fainelli, Andrew Lunn and Vladimir
Oltean. Update the hellcreek binding accordingly.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221212081546.6916-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tso_count_descs() is a small function doing simple calculation,
and tso_count_descs() is used in fast path, so inline it to
reduce the overhead of calls.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20221212032426.16050-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptp_classify_raw() is not exactly cheap, since it invokes a BPF program
for every skb in the receive path. For switches which do not provide
ds->ops->port_rxtstamp(), running ptp_classify_raw() provides precisely
nothing, so check for the presence of the function pointer first, since
that is much cheaper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20221209175840.390707-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Trace points for mv88e6xxx
While testing Hans Schultz' attempt at offloading MAB on mv88e6xxx:
https://patchwork.kernel.org/project/netdevbpf/cover/20221205185908.217520-1-netdev@kapio-technology.com/
I noticed that he still didn't get rid of the huge log spam caused by
ATU and VTU violations, even if we discussed about this:
https://patchwork.kernel.org/project/netdevbpf/cover/20221112203748.68995-1-netdev@kapio-technology.com/#25091076
It seems unlikely he's going to ever do this, so here is my own stab at
converting those messages to trace points. This is IMO an improvement
regardless of whether Hans' work with MAB lands or not, especially the
VTU violations which were quite annoying to me as well.
A small sample of before:
$ ./bridge_locked_port.sh lan1 lan2 lan3 lan4
[ 114.465272] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9
[ 119.550508] mv88e6xxx_g1_vtu_prob_irq_thread_fn: 34 callbacks suppressed
[ 120.369586] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9
[ 120.473658] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9
[ 125.535209] mv88e6xxx_g1_vtu_prob_irq_thread_fn: 21 callbacks suppressed
[ 125.535243] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9
[ 126.174558] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9
[ 130.234055] mv88e6085 d0032004.mdio-mii:10: ATU miss violation for 00:01:02:03:04:01 fid 3 portvec 4 spid 2
[ 130.338193] mv88e6085 d0032004.mdio-mii:10: ATU miss violation for 00:01:02:03:04:01 fid 3 portvec 4 spid 2
[ 134.626099] mv88e6xxx_g1_atu_prob_irq_thread_fn: 38 callbacks suppressed
[ 134.626132] mv88e6085 d0032004.mdio-mii:10: ATU miss violation for 00:01:02:03:04:01 fid 3 portvec 4 spid 2
and after:
$ trace-cmd record -e mv88e6xxx ./bridge_locked_port.sh lan1 lan2 lan3 lan4
$ trace-cmd report
irq/35-moxtet-60 [001] 93.929734: mv88e6xxx_vtu_miss_violation: dev d0032004.mdio-mii:10 spid 9 vid 100
irq/35-moxtet-60 [001] 94.183209: mv88e6xxx_vtu_miss_violation: dev d0032004.mdio-mii:10 spid 9 vid 100
irq/35-moxtet-60 [001] 101.865545: mv88e6xxx_vtu_miss_violation: dev d0032004.mdio-mii:10 spid 9 vid 100
irq/35-moxtet-60 [001] 121.831261: mv88e6xxx_vtu_member_violation: dev d0032004.mdio-mii:10 spid 9 vid 100
irq/35-moxtet-60 [001] 122.371238: mv88e6xxx_vtu_member_violation: dev d0032004.mdio-mii:10 spid 9 vid 100
irq/35-moxtet-60 [001] 148.452932: mv88e6xxx_atu_miss_violation: dev d0032004.mdio-mii:10 spid 2 portvec 0x4 addr 00:01:02:03:04:01 fid 0
v1 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20221207233954.3619276-1-vladimir.oltean@nxp.com/
====================
Link: https://lore.kernel.org/r/20221209172817.371434-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is possible to trigger these VTU violation messages very easily,
it's only necessary to send packets with an unknown VLAN ID to a port
that belongs to a VLAN-aware bridge.
Do a similar thing as for ATU violation messages, and hide them in the
kernel's trace buffer.
New usage model:
$ trace-cmd list | grep mv88e6xxx
mv88e6xxx
mv88e6xxx:mv88e6xxx_vtu_miss_violation
mv88e6xxx:mv88e6xxx_vtu_member_violation
$ trace-cmd report
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In applications where the switch ports must perform 802.1X based
authentication and are therefore locked, ATU violation interrupts are
quite to be expected as part of normal operation. The problem is that
they currently spam the kernel log, even if rate limited.
Create a series of trace points, all derived from the same event class,
which log these violations to the kernel's trace buffer, which is both
much faster and much easier to ignore than printing to a serial console.
New usage model:
$ trace-cmd list | grep mv88e6xxx
mv88e6xxx
mv88e6xxx:mv88e6xxx_atu_full_violation
mv88e6xxx:mv88e6xxx_atu_miss_violation
mv88e6xxx:mv88e6xxx_atu_member_violation
$ trace-cmd record -e mv88e6xxx sleep 10
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ATU violation occurs, the switch uses the ATU FID register to
report the FID of the MAC address that incurred the violation. It would
be good for the driver to know the FID value for purposes such as
logging and CPU-based authentication.
Up until now, the driver has been calling the mv88e6xxx_g1_atu_op()
function to read ATU violations, but that doesn't do exactly what we
want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0.
(side note, the documentation for the ATU Get/Clear Violation command
says that writes to the ATU FID register have no effect before the
operation starts, it's only that we disregard the value that this
register provides once the operation completes)
So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather
mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need
to write it.
The remainder of mv88e6xxx_g1_atu_op() except for
mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a
GET_CLR_VIOLATION command to the ATU. In principle we could have still
kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID
register are pointless, but in the interest of doing less CPU work per
interrupt, write a new function called mv88e6xxx_g1_read_atu_violation()
and call it.
The FID will be the port default FID as set by mv88e6xxx_port_set_fid()
if the VID from the packet cannot be found in the VTU. Otherwise it is
the FID derived from the VTU entry associated with that VID.
Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the MV88E6XXX_PORT_ASSOC_VECTOR_INT_AGE_OUT bit (interrupt on
age out) is not enabled by the driver, and as a result, the print for
age out violations is dead code.
Remove it until there is some way for this to be triggered.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=expz
-----END PGP SIGNATURE-----
Merge tag 'x86_alternatives_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternative update from Borislav Petkov:
"A single alternatives patching fix for modules:
- Have alternatives patch the same sections in modules as in vmlinux"
* tag 'x86_alternatives_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Consistently patch SMP locks in vmlinux and modules
- Add another MCE severity error case to the Intel error severity
table to promote UC and AR errors to panic severity and remove the
corresponding code condition doing that.
- Make sure the thresholding and deferred error interrupts on AMD SMCA
systems clear the all registers reporting an error so that there are no
multiple errors logged for the same event
-----BEGIN PGP SIGNATURE-----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=sKP5
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix confusing output from /sys/kernel/debug/ras/daemon_active
- Add another MCE severity error case to the Intel error severity table
to promote UC and AR errors to panic severity and remove the
corresponding code condition doing that.
- Make sure the thresholding and deferred error interrupts on AMD SMCA
systems clear the all registers reporting an error so that there are
no multiple errors logged for the same event
* tag 'ras_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS: Fix return value from show_trace()
x86/mce: Use severity table to handle uncorrected errors in kernel
x86/MCE/AMD: Clear DFR errors found in THR handler
- Add a new VID/PID 0489/e0f2 for MT7922
- Add Realtek RTL8852BE support ID 0x0cb8:0xc559
- Add a new PID/VID 13d3/3549 for RTL8822CU
- Add support for broadcom BCM43430A0 & BCM43430A1
- Add CONFIG_BT_HCIBTUSB_POLL_SYNC
- Add CONFIG_BT_LE_L2CAP_ECRED
- Add support for CYW4373A0
- Add support for RTL8723DS
- Add more device IDs for WCN6855
- Add Broadcom BCM4377 family PCIe Bluetooth
-----BEGIN PGP SIGNATURE-----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=Oj2B
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add a new VID/PID 0489/e0f2 for MT7922
- Add Realtek RTL8852BE support ID 0x0cb8:0xc559
- Add a new PID/VID 13d3/3549 for RTL8822CU
- Add support for broadcom BCM43430A0 & BCM43430A1
- Add CONFIG_BT_HCIBTUSB_POLL_SYNC
- Add CONFIG_BT_LE_L2CAP_ECRED
- Add support for CYW4373A0
- Add support for RTL8723DS
- Add more device IDs for WCN6855
- Add Broadcom BCM4377 family PCIe Bluetooth
* tag 'for-net-next-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits)
Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete
Bluetooth: ISO: Avoid circular locking dependency
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
Bluetooth: hci_conn: Fix crash on hci_create_cis_sync
Bluetooth: btintel: Fix existing sparce warnings
Bluetooth: btusb: Fix existing sparce warning
Bluetooth: btusb: Fix new sparce warnings
Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559
dt-bindings: net: realtek-bluetooth: Add RTL8723DS
Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922
dt-bindings: bluetooth: broadcom: add BCM43430A0 & BCM43430A1
Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in bcm4377_probe()
...
====================
Link: https://lore.kernel.org/r/20221212222322.1690780-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drop this forced built-in only configuration by disentangling it from
GHES. Work by Jia He.
- The usual small cleanups and improvements all over EDAC land
-----BEGIN PGP SIGNATURE-----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=DFp8
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Make ghes_edac a simple module like the rest of the EDAC drivers and
drop the forced built-in only configuration by disentangling it from
GHES (Jia He)
- The usual small cleanups and improvements all over EDAC land
* tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
EDAC/i5400: Fix typo in comment: vaious -> various
EDAC/mc_sysfs: Increase legacy channel support to 12
MAINTAINERS: Make Mauro EDAC reviewer
MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac
EDAC/igen6: Return the correct error type when not the MC owner
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
EDAC: Check for GHES preference in the chipset-specific EDAC drivers
EDAC/ghes: Make ghes_edac a proper module
EDAC/ghes: Prepare to make ghes_edac a proper module
EDAC/ghes: Add a notifier for reporting memory errors
efi/cper: Export several helpers for ghes_edac to use
EDAC/i5000: Mark as BROKEN
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Incorrect error check in nft_expr_inner_parse(), from Dan Carpenter.
2) Add DATA_SENT state to SCTP connection tracking helper, from
Sriram Yagnaraman.
3) Consolidate nf_confirm for ipv4 and ipv6, from Florian Westphal.
4) Add bitmask support for ipset, from Vishwanath Pai.
5) Handle icmpv6 redirects as RELATED, from Florian Westphal.
6) Add WARN_ON_ONCE() to impossible case in flowtable datapath,
from Li Qiong.
7) A large batch of IPVS updates to replace timer-based estimators by
kthreads to scale up wrt. CPUs and workload (millions of estimators).
Julian Anastasov says:
This patchset implements stats estimation in kthread context.
It replaces the code that runs on single CPU in timer context every 2
seconds and causing latency splats as shown in reports [1], [2], [3].
The solution targets setups with thousands of IPVS services,
destinations and multi-CPU boxes.
Spread the estimation on multiple (configured) CPUs and multiple
time slots (timer ticks) by using multiple chains organized under RCU
rules. When stats are not needed, it is recommended to use
run_estimation=0 as already implemented before this change.
RCU Locking:
- As stats are now RCU-locked, tot_stats, svc and dest which
hold estimator structures are now always freed from RCU
callback. This ensures RCU grace period after the
ip_vs_stop_estimator() call.
Kthread data:
- every kthread works over its own data structure and all
such structures are attached to array. For now we limit
kthreads depending on the number of CPUs.
- even while there can be a kthread structure, its task
may not be running, eg. before first service is added or
while the sysctl var is set to an empty cpulist or
when run_estimation is set to 0 to disable the estimation.
- the allocated kthread context may grow from 1 to 50
allocated structures for timer ticks which saves memory for
setups with small number of estimators
- a task and its structure may be released if all
estimators are unlinked from its chains, leaving the
slot in the array empty
- every kthread data structure allows limited number
of estimators. Kthread 0 is also used to initially
calculate the max number of estimators to allow in every
chain considering a sub-100 microsecond cond_resched
rate. This number can be from 1 to hundreds.
- kthread 0 has an additional job of optimizing the
adding of estimators: they are first added in
temp list (est_temp_list) and later kthread 0
distributes them to other kthreads. The optimization
is based on the fact that newly added estimator
should be estimated after 2 seconds, so we have the
time to offload the adding to chain from controlling
process to kthread 0.
- to add new estimators we use the last added kthread
context (est_add_ktid). The new estimators are linked to
the chains just before the estimated one, based on add_row.
This ensures their estimation will start after 2 seconds.
If estimators are added in bursts, common case if all
services and dests are initially configured, we may
spread the estimators to more chains and as result,
reducing the initial delay below 2 seconds.
Many thanks to Jiri Wiesner for his valuable comments
and for spending a lot of time reviewing and testing
the changes on different platforms with 48-256 CPUs and
1-8 NUMA nodes under different cpufreq governors.
The new IPVS estimators do not use workqueue infrastructure
because:
- The estimation can take long time when using multiple IPVS rules (eg.
millions estimator structures) and especially when box has multiple
CPUs due to the for_each_possible_cpu usage that expects packets from
any CPU. With est_nice sysctl we have more control how to prioritize the
estimation kthreads compared to other processes/kthreads that have
latency requirements (such as servers). As a benefit, we can see these
kthreads in top and decide if we will need some further control to limit
their CPU usage (max number of structure to estimate per kthread).
- with kthreads we run code that is read-mostly, no write/lock
operations to process the estimators in 2-second intervals.
- work items are one-shot: as estimators are processed every
2 seconds, they need to be re-added every time. This again
loads the timers (add_timer) if we use delayed works, as there are
no kthreads to do the timings.
[1] Report from Yunhong Jiang:
https://lore.kernel.org/netdev/D25792C1-1B89-45DE-9F10-EC350DC04ADC@gmail.com/
[2] https://marc.info/?l=linux-virtual-server&m=159679809118027&w=2
[3] Report from Dust:
https://archive.linuxvirtualserver.org/html/lvs-devel/2020-12/msg00000.html
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: run_estimation should control the kthread tasks
ipvs: add est_cpulist and est_nice sysctl vars
ipvs: use kthreads for stats estimation
ipvs: use u64_stats_t for the per-cpu counters
ipvs: use common functions for stats allocation
ipvs: add rcu protection to stats
netfilter: flowtable: add a 'default' case to flowtable datapath
netfilter: conntrack: set icmpv6 redirects as RELATED
netfilter: ipset: Add support for new bitmask parameter
netfilter: conntrack: merge ipv4+ipv6 confirm functions
netfilter: conntrack: add sctp DATA_SENT state
netfilter: nft_inner: fix IS_ERR() vs NULL check
====================
Link: https://lore.kernel.org/r/20221211101204.1751-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix up ptrace interface to protection keys register (PKRU)
* Avoid undefined compiler behavior with TYPE_ALIGN
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmOXYisACgkQaDWVMHDJ
krAJkA//QRChRwyKi1syinXt2SGoSa3mTzP23SyV0TunOfKBiBUreFJ2mMFjsX0h
V7SJcu82sCWLHAY6LZRdyiF8zK3Cfzpbgb1QfzBCefE/gU801FhCypqNbQO5Lpdr
PEo+naaDOzwDWDt0A6OkAArgb0zfaOGL+OBhuwT7mcUtBz6gCakFqG2BMgOzqD1z
SAp0RraoSsFnKFl5Gv44+gkThq8/8yL5tyrJtnGv1jAsbhw9zmloaOue6MNMPJhH
3sFQnML3qeNRozquWWeCPu/hxWuFDitPhwdmNRZrnQ3DyRdDhCZPOjv+tQmxI3EO
5c+UIkMIsRh2nZLwHcM+iO5cWE7lyiAWpgqqArB+r2CFXWK5q2lplhXngBodE9Kr
ki/NZ6oEitT3+bLXhCwyc7WKxohl2IlmclJ4AD3Qrp4bzPhfsZebL6nNs/3bxWuF
CxJWIKzjtIcgNSEJaDOzFA5CAImq74r/kCW4e11ZXwmOnx6PX1YG6p0C1yknrZYJ
bvy8WxureO7OJEcVZfwxpXLYbb+7Q/k/l2DkUdVAvKSCB81uWR4JzEp4oooDxf2j
6x9qT5Mi95FhAHOCmlxwkQJTBCB36LkVF/3ESEOqJmun4F5ghPbMX2JzpBa6jPCS
lzkBrzA8MAdmaLHhDO+nd5m8HVY3QBSXDVtRTycmuloeoSeyBno=
=An0n
-----END PGP SIGNATURE-----
Merge tag 'x86_fpu_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Dave Hansen:
"There are two little fixes in here, one to give better XSAVE warnings
and another to address some undefined behavior in offsetof().
There is also a collection of patches to fix some issues with ptrace
and the protection keys register (PKRU). PKRU is a real oddity because
it is exposed in the XSAVE-related ABIs, but it is generally managed
without using XSAVE in the kernel. This fix thankfully came with a
selftest to ward off future regressions.
Summary:
- Clarify XSAVE consistency warnings
- Fix up ptrace interface to protection keys register (PKRU)
- Avoid undefined compiler behavior with TYPE_ALIGN"
* tag 'x86_fpu_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN
selftests/vm/pkeys: Add a regression test for setting PKRU through ptrace
x86/fpu: Emulate XRSTOR's behavior if the xfeatures PKRU bit is not set
x86/fpu: Allow PKRU to be (once again) written by ptrace.
x86/fpu: Add a pkru argument to copy_uabi_to_xstate()
x86/fpu: Add a pkru argument to copy_uabi_from_kernel_to_xstate().
x86/fpu: Take task_struct* in copy_sigframe_from_user_to_xstate()
x86/fpu/xstate: Fix XSTATE_WARN_ON() to emit relevant diagnostics
-----BEGIN PGP SIGNATURE-----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=yyO+
-----END PGP SIGNATURE-----
Merge tag 'x86_splitlock_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Dave Hansen:
"Add a sysctl to control the split lock misery mode.
This enables users to reduce the penalty inflicted on split lock
users. There are some proprietary, binary-only games which became
entirely unplayable with the old penalty.
Anyone opting into the new mode is, of course, more exposed to the DoS
nasitness inherent with split locks, but they can play their games
again"
* tag 'x86_splitlock_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add sysctl to control the misery mode
* Remove unnecessary arch_has_empty_bitmaps structure memory
* Move rescrtl MSR defines into msr-index.h, like normal MSRs
-----BEGIN PGP SIGNATURE-----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=n2UE
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Dave Hansen:
"These declare the resource control (rectrl) MSRs a bit more normally
and clean up an unnecessary structure member:
- Remove unnecessary arch_has_empty_bitmaps structure memory
- Move rescrtl MSR defines into msr-index.h, like normal MSRs"
* tag 'x86_cache_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Move MSR defines into msr-index.h
x86/resctrl: Remove arch_has_empty_bitmaps
-----BEGIN PGP SIGNATURE-----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=JGnq
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tdx updates from Dave Hansen:
"This includes a single chunk of new functionality for TDX guests which
allows them to talk to the trusted TDX module software and obtain an
attestation report.
This report can then be used to prove the trustworthiness of the guest
to a third party and get access to things like storage encryption
keys"
* tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/tdx: Test TDX attestation GetReport support
virt: Add TDX guest driver
x86/tdx: Add a wrapper to get TDREPORT0 from the TDX Module
This make sure HCI_OP_WRITE_AUTH_PAYLOAD_TO completes before notifying
the encryption change just as is done with HCI_OP_READ_ENC_KEY_SIZE.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
